[tip: x86/iopl] x86/cpu: Unify cpu_init()

* [tip: x86/iopl] x86/cpu: Unify cpu_init()
@ 2019-11-16 11:51 tip-bot2 for Thomas Gleixner
  0 siblings, 0 replies; 2+ messages in thread
From: tip-bot2 for Thomas Gleixner @ 2019-11-16 11:51 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: Thomas Gleixner, Andy Lutomirski, Ingo Molnar, Borislav Petkov,
	linux-kernel

The following commit has been merged into the x86/iopl branch of tip:

Commit-ID:     505b789996f64bdbfcc5847dd4b5076fc7c50274
Gitweb:        https://git.kernel.org/tip/505b789996f64bdbfcc5847dd4b5076fc7c50274
Author:        Thomas Gleixner <tglx@linutronix.de>
AuthorDate:    Mon, 11 Nov 2019 23:03:17 +01:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Sat, 16 Nov 2019 11:23:59 +01:00

x86/cpu: Unify cpu_init()

Similar to copy_thread_tls() the 32bit and 64bit implementations of
cpu_init() are very similar and unification avoids duplicate changes in the
future.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>

---
 arch/x86/kernel/cpu/common.c | 173 ++++++++++++----------------------
 1 file changed, 65 insertions(+), 108 deletions(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 9ae7d1b..d52ec1a 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -53,10 +53,7 @@
 #include <asm/microcode_intel.h>
 #include <asm/intel-family.h>
 #include <asm/cpu_device_id.h>
-
-#ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/uv/uv.h>
-#endif
 
 #include "cpu.h"
 
@@ -1749,7 +1746,7 @@ static void wait_for_master_cpu(int cpu)
 }
 
 #ifdef CONFIG_X86_64
-static void setup_getcpu(int cpu)
+static inline void setup_getcpu(int cpu)
 {
 	unsigned long cpudata = vdso_encode_cpunode(cpu, early_cpu_to_node(cpu));
 	struct desc_struct d = { };
@@ -1769,7 +1766,43 @@ static void setup_getcpu(int cpu)
 
 	write_gdt_entry(get_cpu_gdt_rw(cpu), GDT_ENTRY_CPUNODE, &d, DESCTYPE_S);
 }
+
+static inline void ucode_cpu_init(int cpu)
+{
+	if (cpu)
+		load_ucode_ap();
+}
+
+static inline void tss_setup_ist(struct tss_struct *tss)
+{
+	/* Set up the per-CPU TSS IST stacks */
+	tss->x86_tss.ist[IST_INDEX_DF] = __this_cpu_ist_top_va(DF);
+	tss->x86_tss.ist[IST_INDEX_NMI] = __this_cpu_ist_top_va(NMI);
+	tss->x86_tss.ist[IST_INDEX_DB] = __this_cpu_ist_top_va(DB);
+	tss->x86_tss.ist[IST_INDEX_MCE] = __this_cpu_ist_top_va(MCE);
+}
+
+static inline void gdt_setup_doublefault_tss(int cpu) { }
+
+#else /* CONFIG_X86_64 */
+
+static inline void setup_getcpu(int cpu) { }
+
+static inline void ucode_cpu_init(int cpu)
+{
+	show_ucode_info_early();
+}
+
+static inline void tss_setup_ist(struct tss_struct *tss) { }
+
+static inline void gdt_setup_doublefault_tss(int cpu)
+{
+#ifdef CONFIG_DOUBLEFAULT
+	/* Set up the doublefault TSS pointer in the GDT */
+	__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
 #endif
+}
+#endif /* !CONFIG_X86_64 */
 
 /*
  * cpu_init() initializes state that is per-CPU. Some data is already
@@ -1777,21 +1810,15 @@ static void setup_getcpu(int cpu)
  * and IDT. We reload them nevertheless, this function acts as a
  * 'CPU state barrier', nothing should get across.
  */
-#ifdef CONFIG_X86_64
-
 void cpu_init(void)
 {
+	struct tss_struct *tss = this_cpu_ptr(&cpu_tss_rw);
+	struct task_struct *cur = current;
 	int cpu = raw_smp_processor_id();
-	struct task_struct *me;
-	struct tss_struct *t;
-	int i;
 
 	wait_for_master_cpu(cpu);
 
-	if (cpu)
-		load_ucode_ap();
-
-	t = &per_cpu(cpu_tss_rw, cpu);
+	ucode_cpu_init(cpu);
 
 #ifdef CONFIG_NUMA
 	if (this_cpu_read(numa_node) == 0 &&
@@ -1800,63 +1827,48 @@ void cpu_init(void)
 #endif
 	setup_getcpu(cpu);
 
-	me = current;
-
 	pr_debug("Initializing CPU#%d\n", cpu);
 
-	cr4_clear_bits(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+	if (IS_ENABLED(CONFIG_X86_64) || cpu_feature_enabled(X86_FEATURE_VME) ||
+	    boot_cpu_has(X86_FEATURE_TSC) || boot_cpu_has(X86_FEATURE_DE))
+		cr4_clear_bits(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
 
 	/*
 	 * Initialize the per-CPU GDT with the boot GDT,
 	 * and set up the GDT descriptor:
 	 */
-
 	switch_to_new_gdt(cpu);
-	loadsegment(fs, 0);
-
 	load_current_idt();
 
-	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
-	syscall_init();
+	if (IS_ENABLED(CONFIG_X86_64)) {
+		loadsegment(fs, 0);
+		memset(cur->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
+		syscall_init();
 
-	wrmsrl(MSR_FS_BASE, 0);
-	wrmsrl(MSR_KERNEL_GS_BASE, 0);
-	barrier();
+		wrmsrl(MSR_FS_BASE, 0);
+		wrmsrl(MSR_KERNEL_GS_BASE, 0);
+		barrier();
 
-	x86_configure_nx();
-	x2apic_setup();
-
-	/*
-	 * set up and load the per-CPU TSS
-	 */
-	if (!t->x86_tss.ist[0]) {
-		t->x86_tss.ist[IST_INDEX_DF] = __this_cpu_ist_top_va(DF);
-		t->x86_tss.ist[IST_INDEX_NMI] = __this_cpu_ist_top_va(NMI);
-		t->x86_tss.ist[IST_INDEX_DB] = __this_cpu_ist_top_va(DB);
-		t->x86_tss.ist[IST_INDEX_MCE] = __this_cpu_ist_top_va(MCE);
+		x2apic_setup();
 	}
 
-	t->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
-
-	/*
-	 * <= is required because the CPU will access up to
-	 * 8 bits beyond the end of the IO permission bitmap.
-	 */
-	for (i = 0; i <= IO_BITMAP_LONGS; i++)
-		t->io_bitmap[i] = ~0UL;
-
 	mmgrab(&init_mm);
-	me->active_mm = &init_mm;
-	BUG_ON(me->mm);
+	cur->active_mm = &init_mm;
+	BUG_ON(cur->mm);
 	initialize_tlbstate_and_flush();
-	enter_lazy_tlb(&init_mm, me);
+	enter_lazy_tlb(&init_mm, cur);
 
-	/*
-	 * Initialize the TSS.  sp0 points to the entry trampoline stack
-	 * regardless of what task is running.
-	 */
+	/* Initialize the TSS. */
+	tss_setup_ist(tss);
+	tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
+	memset(tss->io_bitmap, 0xff, sizeof(tss->io_bitmap));
 	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
+
 	load_TR_desc();
+	/*
+	 * sp0 points to the entry trampoline stack regardless of what task
+	 * is running.
+	 */
 	load_sp0((unsigned long)(cpu_entry_stack(cpu) + 1));
 
 	load_mm_ldt(&init_mm);
@@ -1864,6 +1876,8 @@ void cpu_init(void)
 	clear_all_debug_regs();
 	dbg_restore_debug_regs();
 
+	gdt_setup_doublefault_tss(cpu);
+
 	fpu__init_cpu();
 
 	if (is_uv_system())
@@ -1872,63 +1886,6 @@ void cpu_init(void)
 	load_fixmap_gdt(cpu);
 }
 
-#else
-
-void cpu_init(void)
-{
-	int cpu = smp_processor_id();
-	struct task_struct *curr = current;
-	struct tss_struct *t = &per_cpu(cpu_tss_rw, cpu);
-
-	wait_for_master_cpu(cpu);
-
-	show_ucode_info_early();
-
-	pr_info("Initializing CPU#%d\n", cpu);
-
-	if (cpu_feature_enabled(X86_FEATURE_VME) ||
-	    boot_cpu_has(X86_FEATURE_TSC) ||
-	    boot_cpu_has(X86_FEATURE_DE))
-		cr4_clear_bits(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-
-	load_current_idt();
-	switch_to_new_gdt(cpu);
-
-	/*
-	 * Set up and load the per-CPU TSS and LDT
-	 */
-	mmgrab(&init_mm);
-	curr->active_mm = &init_mm;
-	BUG_ON(curr->mm);
-	initialize_tlbstate_and_flush();
-	enter_lazy_tlb(&init_mm, curr);
-
-	/*
-	 * Initialize the TSS.  sp0 points to the entry trampoline stack
-	 * regardless of what task is running.
-	 */
-	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
-	load_TR_desc();
-	load_sp0((unsigned long)(cpu_entry_stack(cpu) + 1));
-
-	load_mm_ldt(&init_mm);
-
-	t->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
-
-#ifdef CONFIG_DOUBLEFAULT
-	/* Set up doublefault TSS pointer in the GDT */
-	__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
-#endif
-
-	clear_all_debug_regs();
-	dbg_restore_debug_regs();
-
-	fpu__init_cpu();
-
-	load_fixmap_gdt(cpu);
-}
-#endif
-
 /*
  * The microcode loader calls this upon late microcode load to recheck features,
  * only when microcode has been updated. Caller holds microcode_mutex and CPU

^ permalink raw reply related	[flat|nested] 2+ messages in thread