[PATCH v2 2/2] gpio: bcm-kona: use platform_irq_count

[Peng Fan <peng.fan@nxp.com>]

From: Peng Fan <peng.fan@nxp.com>

platform_irq_count() is the more generic way (independent of
device trees) to determine the count of available interrupts. So
use this instead.

As platform_irq_count() might return an error code (which
of_irq_count doesn't) some additional handling is necessary.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V2:
 Update commit log, and add err handling
 Not tested, just code inspection

 drivers/gpio/gpio-bcm-kona.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 4122683eb1f9..52ff56166263 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -19,7 +19,6 @@
 #include <linux/io.h>
 #include <linux/gpio/driver.h>
 #include <linux/of_device.h>
-#include <linux/of_irq.h>
 #include <linux/init.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip/chained_irq.h>
@@ -586,11 +585,18 @@ static int bcm_kona_gpio_probe(struct platform_device *pdev)
 
 	kona_gpio->gpio_chip = template_chip;
 	chip = &kona_gpio->gpio_chip;
-	kona_gpio->num_bank = of_irq_count(dev->of_node);
-	if (kona_gpio->num_bank == 0) {
+	ret = platform_irq_count(pdev);
+	if (!ret) {
 		dev_err(dev, "Couldn't determine # GPIO banks\n");
 		return -ENOENT;
+	} else if (ret < 0) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Couldn't determine GPIO banks: %d\n",
+				ret);
+		return ret;
 	}
+	kona_gpio->num_bank = ret;
+
 	if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) {
 		dev_err(dev, "Too many GPIO banks configured (max=%d)\n",
 			GPIO_MAX_BANK_NUM);
-- 
2.16.4