* [PATCH v2 1/3] phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
2020-01-08 12:29 [PATCH v2 0/3] Add QMP V3 USB3 PHY support for SC7180 Sandeep Maheswaram
@ 2020-01-08 12:29 ` Sandeep Maheswaram
2020-01-08 12:29 ` [PATCH v2 2/3] arm64: dts: qcom: sc7180: Remove global phy reset in QMP phy Sandeep Maheswaram
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Sandeep Maheswaram @ 2020-01-08 12:29 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Kishon Vijay Abraham I, Rob Herring,
Mark Rutland, Stephen Boyd, Doug Anderson
Cc: linux-arm-msm, linux-kernel, devicetree, Manu Gautam, Sandeep Maheswaram
Adding QMP v3 USB3 phy support for SC7180.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 38 +++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 7db2a94..dc300a9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -1139,6 +1139,10 @@ static const char * const msm8996_usb3phy_reset_l[] = {
"phy", "common",
};
+static const char * const sc7180_usb3phy_reset_l[] = {
+ "phy",
+};
+
/* list of regulators */
static const char * const qmp_phy_vreg_l[] = {
"vdda-phy", "vdda-pll",
@@ -1265,6 +1269,37 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
.is_dual_lane_phy = true,
};
+static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -2103,6 +2138,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
.compatible = "qcom,ipq8074-qmp-pcie-phy",
.data = &ipq8074_pciephy_cfg,
}, {
+ .compatible = "qcom,sc7180-qmp-usb3-phy",
+ .data = &sc7180_usb3phy_cfg,
+ }, {
.compatible = "qcom,sdm845-qmp-usb3-phy",
.data = &qmp_v3_usb3phy_cfg,
}, {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v2 3/3] dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml
2020-01-08 12:29 [PATCH v2 0/3] Add QMP V3 USB3 PHY support for SC7180 Sandeep Maheswaram
2020-01-08 12:29 ` [PATCH v2 1/3] phy: qcom-qmp: " Sandeep Maheswaram
2020-01-08 12:29 ` [PATCH v2 2/3] arm64: dts: qcom: sc7180: Remove global phy reset in QMP phy Sandeep Maheswaram
@ 2020-01-08 12:29 ` Sandeep Maheswaram
2020-01-14 23:41 ` Rob Herring
2020-02-10 21:35 ` [PATCH v2 0/3] Add QMP V3 USB3 PHY support for SC7180 Matthias Kaehlcke
3 siblings, 1 reply; 7+ messages in thread
From: Sandeep Maheswaram @ 2020-01-08 12:29 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Kishon Vijay Abraham I, Rob Herring,
Mark Rutland, Stephen Boyd, Doug Anderson
Cc: linux-arm-msm, linux-kernel, devicetree, Manu Gautam, Sandeep Maheswaram
Convert QMP phy bindings to DT schema format using json-schema.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
.../devicetree/bindings/phy/qcom,qmp-phy.yaml | 201 ++++++++++++++++++
.../devicetree/bindings/phy/qcom-qmp-phy.txt | 227 ---------------------
2 files changed, 201 insertions(+), 227 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
new file mode 100644
index 0000000..6eb00f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QMP PHY controller
+
+maintainers:
+ - Manu Gautam <mgautam@codeaurora.org>
+
+description:
+ QMP phy controller supports physical layer functionality for a number of
+ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq8074-qmp-pcie-phy
+ - qcom,ipq8074-qmp-pcie-phy
+ - qcom,msm8996-qmp-pcie-phy
+ - qcom,msm8996-qmp-usb3-phy
+ - qcom,msm8998-qmp-usb3-phy
+ - qcom,msm8998-qmp-ufs-phy
+ - qcom,msm8998-qmp-pcie-phy
+ - qcom,sc7180-qmp-usb3-phy
+ - qcom,sdm845-qmp-usb3-phy
+ - qcom,sdm845-qmp-usb3-uni-phy
+ - qcom,sdm845-qmp-ufs-phy
+ - qcom,sm8150-qmp-ufs-phy
+
+ reg:
+ minItems: 1
+ items:
+ - description: Address and length of PHY's common serdes block.
+ - description: Address and length of the DP_COM control block.
+
+ reg-names:
+ items:
+ - const: reg-base
+ - const: dp_com
+
+ "#clock-cells":
+ enum: [ 1, 2 ]
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ clocks:
+ anyOf:
+ - items:
+ - description: Phy aux clock.
+ - description: Phy config clock.
+ - description: 19.2 MHz ref clk.
+ - description: Phy common block aux clock.
+ - items:
+ - description: Phy aux clock.
+ - description: Phy config clock.
+ - description: 19.2 MHz ref clk.
+ - items:
+ - description: 19.2 MHz ref clk.
+ - description: Phy reference aux clock.
+ - items:
+ - description: Phy reference aux clock.
+
+ clock-names:
+ anyOf:
+ - items:
+ - const: aux
+ - const: cfg_ahb
+ - const: ref
+ - const: com_aux
+ - items:
+ - const: aux
+ - const: cfg_ahb
+ - const: ref
+ - items:
+ - const: ref
+ - const: ref_aux
+ - items:
+ - const: ref_aux
+
+ resets:
+ anyOf:
+ - items:
+ - description: reset of phy block.
+ - description: phy common block reset.
+ - description: ahb cfg block reset.
+ - items:
+ - description: reset of phy block.
+ - description: phy common block reset.
+ - items:
+ - description: ahb cfg block reset.
+ - description: PHY reset in the UFS controller.
+ - items:
+ - description: reset of phy block.
+ - items:
+ - description: PHY reset in the UFS controller.
+
+ reset-names:
+ anyOf:
+ - items:
+ - const: phy
+ - const: common
+ - const: cfg
+ - items:
+ - const: phy
+ - const: common
+ - items:
+ - const: ahb
+ - const: ufsphy
+ - items:
+ - const: phy
+ - items:
+ - const: ufsphy
+
+ vdda-phy-supply:
+ description:
+ Phandle to a regulator supply to PHY core block.
+
+ vdda-pll-supply:
+ description:
+ Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+ vddp-ref-clk-supply:
+ description:
+ Phandle to a regulator supply to any specific refclk
+ pll block.
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - "#address-cells"
+ - "#size-cells"
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - vdda-phy-supply
+ - vdda-pll-supply
+
+if:
+ properties:
+ compatible:
+ contains:
+ anyOf:
+ - items:
+ - const: qcom,sdm845-qmp-usb3-phy
+ - items:
+ - const: qcom,sc7180-qmp-usb3-phy
+then:
+ required:
+ - reg-names
+
+#Required nodes:
+#Each device node of QMP phy is required to have as many child nodes as
+#the number of lanes the PHY has.
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ usb_1_qmpphy: phy-wrapper@88e9000 {
+ compatible = "qcom,sc7180-qmp-usb3-phy";
+ reg = <0 0x088e9000 0 0x18c>,
+ <0 0x088e8000 0 0x38>;
+ reg-names = "reg-base", "dp_com";
+ #clock-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>;
+ reset-names = "phy";
+
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vreg_l4a_0p8>;
+
+ usb_1_ssphy: phy@88e9200 {
+ reg = <0 0x088e9200 0 0x128>,
+ <0 0x088e9400 0 0x200>,
+ <0 0x088e9c00 0 0x218>,
+ <0 0x088e9600 0 0x128>,
+ <0 0x088e9800 0 0x200>,
+ <0 0x088e9a00 0 0x18>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
deleted file mode 100644
index eac9ad3..0000000
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ /dev/null
@@ -1,227 +0,0 @@
-Qualcomm QMP PHY controller
-===========================
-
-QMP phy controller supports physical layer functionality for a number of
-controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
-
-Required properties:
- - compatible: compatible list, contains:
- "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
- "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
- "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
- "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
- "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
- "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998,
- "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
- "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
- "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845,
- "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150.
-
-- reg:
- - index 0: address and length of register set for PHY's common
- serdes block.
- - index 1: address and length of the DP_COM control block (for
- "qcom,sdm845-qmp-usb3-phy" only).
-
-- reg-names:
- - For "qcom,sdm845-qmp-usb3-phy":
- - Should be: "reg-base", "dp_com"
- - For all others:
- - The reg-names property shouldn't be defined.
-
- - #address-cells: must be 1
- - #size-cells: must be 1
- - ranges: must be present
-
- - clocks: a list of phandles and clock-specifier pairs,
- one for each entry in clock-names.
- - clock-names: "cfg_ahb" for phy config clock,
- "aux" for phy aux clock,
- "ref" for 19.2 MHz ref clk,
- "com_aux" for phy common block aux clock,
- "ref_aux" for phy reference aux clock,
-
- For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
- For "qcom,msm8996-qmp-pcie-phy" must contain:
- "aux", "cfg_ahb", "ref".
- For "qcom,msm8996-qmp-usb3-phy" must contain:
- "aux", "cfg_ahb", "ref".
- For "qcom,msm8998-qmp-usb3-phy" must contain:
- "aux", "cfg_ahb", "ref".
- For "qcom,msm8998-qmp-ufs-phy" must contain:
- "ref", "ref_aux".
- For "qcom,msm8998-qmp-pcie-phy" must contain:
- "aux", "cfg_ahb", "ref".
- For "qcom,sdm845-qmp-usb3-phy" must contain:
- "aux", "cfg_ahb", "ref", "com_aux".
- For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
- "aux", "cfg_ahb", "ref", "com_aux".
- For "qcom,sdm845-qmp-ufs-phy" must contain:
- "ref", "ref_aux".
- For "qcom,sm8150-qmp-ufs-phy" must contain:
- "ref", "ref_aux".
-
- - resets: a list of phandles and reset controller specifier pairs,
- one for each entry in reset-names.
- - reset-names: "phy" for reset of phy block,
- "common" for phy common block reset,
- "cfg" for phy's ahb cfg block reset,
- "ufsphy" for the PHY reset in the UFS controller.
-
- For "qcom,ipq8074-qmp-pcie-phy" must contain:
- "phy", "common".
- For "qcom,msm8996-qmp-pcie-phy" must contain:
- "phy", "common", "cfg".
- For "qcom,msm8996-qmp-usb3-phy" must contain
- "phy", "common".
- For "qcom,msm8998-qmp-usb3-phy" must contain
- "phy", "common".
- For "qcom,msm8998-qmp-ufs-phy": must contain:
- "ufsphy".
- For "qcom,msm8998-qmp-pcie-phy" must contain:
- "phy", "common".
- For "qcom,sdm845-qmp-usb3-phy" must contain:
- "phy", "common".
- For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
- "phy", "common".
- For "qcom,sdm845-qmp-ufs-phy": must contain:
- "ufsphy".
- For "qcom,sm8150-qmp-ufs-phy": must contain:
- "ufsphy".
-
- - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
-
-Optional properties:
- - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk
- pll block.
-
-Required nodes:
- - Each device node of QMP phy is required to have as many child nodes as
- the number of lanes the PHY has.
-
-Required properties for child nodes of PCIe PHYs (one child per lane):
- - reg: list of offset and length pairs of register sets for PHY blocks -
- tx, rx, pcs, and pcs_misc (optional).
- - #phy-cells: must be 0
-
-Required properties for a single "lanes" child node of non-PCIe PHYs:
- - reg: list of offset and length pairs of register sets for PHY blocks
- For 1-lane devices:
- tx, rx, pcs, and (optionally) pcs_misc
- For 2-lane devices:
- tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc
- - #phy-cells: must be 0
-
-Required properties for child node of PCIe and USB3 qmp phys:
- - clocks: a list of phandles and clock-specifier pairs,
- one for each entry in clock-names.
- - clock-names: Must contain following:
- "pipe<lane-number>" for pipe clock specific to each lane.
- - clock-output-names: Name of the PHY clock that will be the parent for
- the above pipe clock.
- For "qcom,ipq8074-qmp-pcie-phy":
- - "pcie20_phy0_pipe_clk" Pipe Clock parent
- (or)
- "pcie20_phy1_pipe_clk"
- - #clock-cells: must be 0
- - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then
- gate-controlled by the gcc.
-
-Required properties for child node of PHYs with lane reset, AKA:
- "qcom,msm8996-qmp-pcie-phy"
- - resets: a list of phandles and reset controller specifier pairs,
- one for each entry in reset-names.
- - reset-names: Must contain following:
- "lane<lane-number>" for reset specific to each lane.
-
-Example:
- phy@34000 {
- compatible = "qcom,msm8996-qmp-pcie-phy";
- reg = <0x34000 0x488>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
-
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
-
- resets = <&gcc GCC_PCIE_PHY_BCR>,
- <&gcc GCC_PCIE_PHY_COM_BCR>,
- <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
- reset-names = "phy", "common", "cfg";
-
- pciephy_0: lane@35000 {
- reg = <0x35000 0x130>,
- <0x35200 0x200>,
- <0x35400 0x1dc>;
- #clock-cells = <0>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "pcie_0_pipe_clk_src";
- resets = <&gcc GCC_PCIE_0_PHY_BCR>;
- reset-names = "lane0";
- };
-
- pciephy_1: lane@36000 {
- ...
- ...
- };
-
- phy@88eb000 {
- compatible = "qcom,sdm845-qmp-usb3-uni-phy";
- reg = <0x88eb000 0x18c>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_SEC_CLKREF_CLK>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
- resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
- <&gcc GCC_USB3_PHY_SEC_BCR>;
- reset-names = "phy", "common";
-
- lane@88eb200 {
- reg = <0x88eb200 0x128>,
- <0x88eb400 0x1fc>,
- <0x88eb800 0x218>,
- <0x88eb600 0x70>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
- };
-
- phy@1d87000 {
- compatible = "qcom,sdm845-qmp-ufs-phy";
- reg = <0x1d87000 0x18c>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clock-names = "ref",
- "ref_aux";
- clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
- lanes@1d87400 {
- reg = <0x1d87400 0x108>,
- <0x1d87600 0x1e0>,
- <0x1d87c00 0x1dc>,
- <0x1d87800 0x108>,
- <0x1d87a00 0x1e0>;
- #phy-cells = <0>;
- };
- };
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 7+ messages in thread