* [RESEND,v2,0/1] Add mt7629 pwm support
@ 2020-02-12 2:35 Sam Shih
2020-02-12 2:35 ` [RESEND,v2,1/1] arm: dts: mediatek: add " Sam Shih
0 siblings, 1 reply; 4+ messages in thread
From: Sam Shih @ 2020-02-12 2:35 UTC (permalink / raw)
To: Matthias Brugger, Rob Herring, Mark Rutland
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-mediatek, Sam Shih
A gentle ping on this whole patch series
This adds pwm support for MT7629.
Change since v1:
remove unused property num-pwm
Used:
https://patchwork.kernel.org/patch/11160851/
Related dependent driver updates have been merged into maintainer's kernel
source tree.
Sam Shih (1):
arm: dts: mediatek: add mt7629 pwm support
arch/arm/boot/dts/mt7629.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [RESEND,v2,1/1] arm: dts: mediatek: add mt7629 pwm support
2020-02-12 2:35 [RESEND,v2,0/1] Add mt7629 pwm support Sam Shih
@ 2020-02-12 2:35 ` Sam Shih
2020-02-12 10:15 ` Matthias Brugger
2020-05-16 15:37 ` Matthias Brugger
0 siblings, 2 replies; 4+ messages in thread
From: Sam Shih @ 2020-02-12 2:35 UTC (permalink / raw)
To: Matthias Brugger, Rob Herring, Mark Rutland
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-mediatek, Sam Shih
This adds pwm support for MT7629.
Used:
https://patchwork.kernel.org/patch/11160851/
Change since v1:
remove unused property num-pwm
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
arch/arm/boot/dts/mt7629.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
index 867b88103b9d..ce2a30a24017 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -241,6 +241,20 @@
status = "disabled";
};
+ pwm: pwm@11006000 {
+ compatible = "mediatek,mt7629-pwm";
+ reg = <0x11006000 0x1000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&pericfg CLK_PERI_PWM_PD>,
+ <&pericfg CLK_PERI_PWM1_PD>;
+ clock-names = "top", "main", "pwm1";
+ assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
+ assigned-clock-parents =
+ <&topckgen CLK_TOP_UNIVPLL2_D4>;
+ status = "disabled";
+ };
+
i2c: i2c@11007000 {
compatible = "mediatek,mt7629-i2c",
"mediatek,mt2712-i2c";
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [RESEND,v2,1/1] arm: dts: mediatek: add mt7629 pwm support
2020-02-12 2:35 ` [RESEND,v2,1/1] arm: dts: mediatek: add " Sam Shih
@ 2020-02-12 10:15 ` Matthias Brugger
2020-05-16 15:37 ` Matthias Brugger
1 sibling, 0 replies; 4+ messages in thread
From: Matthias Brugger @ 2020-02-12 10:15 UTC (permalink / raw)
To: Sam Shih, Rob Herring, Mark Rutland
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-mediatek
On 12/02/2020 03:35, Sam Shih wrote:
> This adds pwm support for MT7629.
The information below should not be part of the commit message, the next time
please put it below the line "---".
> Used:
> https://patchwork.kernel.org/patch/11160851/
>
> Change since v1:
> remove unused property num-pwm
>
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
> arch/arm/boot/dts/mt7629.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
> index 867b88103b9d..ce2a30a24017 100644
> --- a/arch/arm/boot/dts/mt7629.dtsi
> +++ b/arch/arm/boot/dts/mt7629.dtsi
> @@ -241,6 +241,20 @@
> status = "disabled";
> };
>
> + pwm: pwm@11006000 {
> + compatible = "mediatek,mt7629-pwm";
> + reg = <0x11006000 0x1000>;
> + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_PWM_SEL>,
> + <&pericfg CLK_PERI_PWM_PD>,
> + <&pericfg CLK_PERI_PWM1_PD>;
> + clock-names = "top", "main", "pwm1";
> + assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
> + assigned-clock-parents =
> + <&topckgen CLK_TOP_UNIVPLL2_D4>;
> + status = "disabled";
> + };
> +
This does not match the binding description.
Please fix that.
> i2c: i2c@11007000 {
> compatible = "mediatek,mt7629-i2c",
> "mediatek,mt2712-i2c";
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [RESEND,v2,1/1] arm: dts: mediatek: add mt7629 pwm support
2020-02-12 2:35 ` [RESEND,v2,1/1] arm: dts: mediatek: add " Sam Shih
2020-02-12 10:15 ` Matthias Brugger
@ 2020-05-16 15:37 ` Matthias Brugger
1 sibling, 0 replies; 4+ messages in thread
From: Matthias Brugger @ 2020-05-16 15:37 UTC (permalink / raw)
To: Sam Shih, Rob Herring, Mark Rutland
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-mediatek
On 12/02/2020 03:35, Sam Shih wrote:
> This adds pwm support for MT7629.
> Used:
> https://patchwork.kernel.org/patch/11160851/
>
> Change since v1:
> remove unused property num-pwm
>
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Applied now to v5.7-next/dts32
Thanks!
> ---
> arch/arm/boot/dts/mt7629.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
> index 867b88103b9d..ce2a30a24017 100644
> --- a/arch/arm/boot/dts/mt7629.dtsi
> +++ b/arch/arm/boot/dts/mt7629.dtsi
> @@ -241,6 +241,20 @@
> status = "disabled";
> };
>
> + pwm: pwm@11006000 {
> + compatible = "mediatek,mt7629-pwm";
> + reg = <0x11006000 0x1000>;
> + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_PWM_SEL>,
> + <&pericfg CLK_PERI_PWM_PD>,
> + <&pericfg CLK_PERI_PWM1_PD>;
> + clock-names = "top", "main", "pwm1";
> + assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
> + assigned-clock-parents =
> + <&topckgen CLK_TOP_UNIVPLL2_D4>;
> + status = "disabled";
> + };
> +
> i2c: i2c@11007000 {
> compatible = "mediatek,mt7629-i2c",
> "mediatek,mt2712-i2c";
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-05-16 15:37 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-12 2:35 [RESEND,v2,0/1] Add mt7629 pwm support Sam Shih
2020-02-12 2:35 ` [RESEND,v2,1/1] arm: dts: mediatek: add " Sam Shih
2020-02-12 10:15 ` Matthias Brugger
2020-05-16 15:37 ` Matthias Brugger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).