* [PULL REQUEST] i2c for v5.6
@ 2020-02-29 20:17 Wolfram Sang
2020-03-01 1:25 ` pr-tracker-bot
0 siblings, 1 reply; 6+ messages in thread
From: Wolfram Sang @ 2020-02-29 20:17 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-i2c, linux-kernel, Peter Rosin, Bartosz Golaszewski
[-- Attachment #1: Type: text/plain, Size: 1611 bytes --]
Linus,
I2C has three driver bugfixes for you. We agreed on the Mac regression
to go in via I2C. A last minute fix in the branch was from me when I
discovered that I accidenlty signed the last patch twice. No further
changes in the patch itself.
Please pull.
Thanks,
Wolfram
The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:
Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-current-fixed
for you to fetch changes up to 38b17afb0ebb9ecd41418d3c08bcf9198af4349d:
macintosh: therm_windtunnel: fix regression when instantiating devices (2020-02-29 21:13:22 +0100)
----------------------------------------------------------------
Gustavo A. R. Silva (1):
i2c: altera: Fix potential integer overflow
Wolfram Sang (2):
i2c: jz4780: silence log flood on txabrt
macintosh: therm_windtunnel: fix regression when instantiating devices
with much appreciated quality assurance from
----------------------------------------------------------------
Erhard Furtner (1):
(Test) macintosh: therm_windtunnel: fix regression when instantiating devices
H. Nikolaus Schaller (1):
(Test) i2c: jz4780: silence log flood on txabrt
Thor Thayer (1):
(Rev.) i2c: altera: Fix potential integer overflow
drivers/i2c/busses/i2c-altera.c | 2 +-
drivers/i2c/busses/i2c-jz4780.c | 36 ++-----------------------
drivers/macintosh/therm_windtunnel.c | 52 +++++++++++++++++++++---------------
3 files changed, 34 insertions(+), 56 deletions(-)
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PULL REQUEST] i2c for v5.6
@ 2020-03-14 21:08 Wolfram Sang
2020-03-15 2:00 ` pr-tracker-bot
0 siblings, 1 reply; 6+ messages in thread
From: Wolfram Sang @ 2020-03-14 21:08 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-i2c, linux-kernel, Peter Rosin, Bartosz Golaszewski
[-- Attachment #1: Type: text/plain, Size: 2849 bytes --]
Linus,
I2C has quite some regression fixes this time. One is also related to
watchdogs, we have proper acks from Guenter for them.
Please pull.
Thanks,
Wolfram
The following changes since commit 2c523b344dfa65a3738e7039832044aa133c75fb:
Linux 5.6-rc5 (2020-03-08 17:44:44 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-current
for you to fetch changes up to 92bd1f2e1eed493a73a19012a3a7f1feed0883ff:
Merge tag 'at24-fixes-for-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current (2020-03-13 16:32:28 +0100)
----------------------------------------------------------------
Hamish Martin (1):
i2c: gpio: suppress error on probe defer
Jarkko Nikula (1):
i2c: designware-pci: Fix BUG_ON during device removal
Michael Auchter (1):
misc: eeprom: at24: fix regulator underflow
Mika Westerberg (3):
watchdog: iTCO_wdt: Export vendorsupport
watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
Wolfram Sang (3):
macintosh: windfarm: fix MODINFO regression
i2c: acpi: put device when verifying client fails
Merge tag 'at24-fixes-for-v5.6-rc6' of git://git.kernel.org/.../brgl/linux into i2c/for-current
with much appreciated quality assurance from
----------------------------------------------------------------
Andy Shevchenko (2):
(Rev.) i2c: acpi: put device when verifying client fails
(Rev.) i2c: designware-pci: Fix BUG_ON during device removal
Erhard Furtner (1):
(Test) macintosh: windfarm: fix MODINFO regression
Geert Uytterhoeven (1):
(Rev.) i2c: acpi: put device when verifying client fails
Guenter Roeck (3):
(Rev.) i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
(Rev.) watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
(Rev.) watchdog: iTCO_wdt: Export vendorsupport
drivers/i2c/busses/i2c-designware-pcidrv.c | 1 +
drivers/i2c/busses/i2c-gpio.c | 2 +-
drivers/i2c/busses/i2c-i801.c | 45 ++++++++---------------------
drivers/i2c/i2c-core-acpi.c | 10 ++++++-
drivers/macintosh/windfarm_ad7417_sensor.c | 7 +++++
drivers/macintosh/windfarm_fcu_controls.c | 7 +++++
drivers/macintosh/windfarm_lm75_sensor.c | 16 +++++++++-
drivers/macintosh/windfarm_lm87_sensor.c | 7 +++++
drivers/macintosh/windfarm_max6690_sensor.c | 7 +++++
drivers/macintosh/windfarm_smu_sat.c | 7 +++++
drivers/misc/eeprom/at24.c | 3 +-
drivers/watchdog/iTCO_vendor.h | 2 ++
drivers/watchdog/iTCO_vendor_support.c | 16 +++++-----
drivers/watchdog/iTCO_wdt.c | 28 ++++++++++--------
14 files changed, 102 insertions(+), 56 deletions(-)
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PULL REQUEST] i2c for v5.6
@ 2020-02-07 17:19 Wolfram Sang
2020-02-07 21:55 ` pr-tracker-bot
0 siblings, 1 reply; 6+ messages in thread
From: Wolfram Sang @ 2020-02-07 17:19 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-i2c, linux-kernel, Peter Rosin, Bartosz Golaszewski
[-- Attachment #1: Type: text/plain, Size: 17289 bytes --]
Linus,
here is my pull request for this cycle. I finally started using
'--edit-description' of 'git branch', so hopefully this is helpful to
you. Other than that, my pull request and some of the applied patches
are later than I would like, yet the christmas and holiday season were
shortening the working time of this cycle quite a bit. Still, all the
code got linux-next coverage and didn't show conflicts.
Please pull.
Thanks,
Wolfram
The following changes since commit b3a987b0264d3ddbb24293ebff10eddfc472f653:
Linux 5.5-rc6 (2020-01-12 16:55:08 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-5.6
for you to fetch changes up to b49f8e0e7bd17b968129790e40f9e2566f4f95ec:
i2c: cros-ec-tunnel: Fix ACPI identifier (2020-01-31 09:01:25 +0100)
----------------------------------------------------------------
(from the branch description for i2c/for-5.6 local branch)
The I2C subsystems has for 5.6:
- huge improvements and refactorizations of the Linux I2C documentation
(lots of thanks to Luca for doing it and Jean for the careful review)
- subsystem wide API conversion to i2c_new_client_device()
- remove obsolete parport-light driver
- smaller core updates (removal of 'extern', enabling more compile testing,
use more helper macros)
- and quite a bunch of driver updates (new IDs, simplifications, better PM,
support of atomic transfers and other improvements)
i2c-mux updates for 5.6:
- The main feature is the idle-state rework of the pca954x driver from
Biwen Li
at24 updates for 5.6:
- minor maintenance: update the license tag, sort headers
- move support for the write-protect pin into nvmem core
- add a reference to the new wp-gpios property in nvmem to at25 bindings
- add support for regulator and pm_runtime control
----------------------------------------------------------------
Akshu Agrawal (1):
i2c: cros-ec-tunnel: Fix slave device enumeration
Alain Volmat (1):
i2c: stm32f7: add PM_SLEEP suspend/resume support
Alex Williams (1):
i2c: cadence: Handle transfer_size rollover
Bartosz Golaszewski (3):
eeprom: at24: update the license tag
eeprom: at24: sort headers alphabetically
nvmem: fix a 'makes pointer from integer without a cast' build warning
Bibby Hsieh (2):
dt-binding: eeprom: at24: add vcc-supply property
misc: eeprom: at24: support pm_runtime control
Biwen Li (2):
dt-bindings: i2c: support property idle-state
i2c: mux: pca954x: support property idle-state
Christoph Müllner (1):
i2c: tiny-usb: Correct I2C fault codes.
Colin Ian King (2):
i2c: parport: fix spelling mistake: "Atmost" -> "At most"
i2c: xiic: fix indentation issue
Dmitry Osipenko (8):
i2c: tegra: Fix suspending in active runtime PM state
i2c: tegra: Properly disable runtime PM on driver's probe error
i2c: tegra: Prevent interrupt triggering after transfer timeout
i2c: tegra: Support atomic transfers
i2c: tegra: Rename I2C_PIO_MODE_MAX_LEN to I2C_PIO_MODE_PREFERRED_LEN
i2c: tegra: Use relaxed versions of readl/writel
i2c: tegra: Always terminate DMA transfer
i2c: tegra: Check DMA completion status in addition to left time
Eugen Hristev (2):
dt-bindings: i2c: at91: cosmetic formatting of compatible list
i2c: at91: remote default value initialization
Geert Uytterhoeven (3):
i2c: core: Use DEVICE_ATTR_*() helper macros
dt-bindings: i2c: rcar: Document r8a77961 support
dt-bindings: i2c: sh_mobile: Document r8a77961 support
Jarkko Nikula (1):
i2c: i801: Add support for Intel Comet Lake PCH-V
Khouloud Touil (5):
dt-bindings: nvmem: new optional property wp-gpios
nvmem: add support for the write-protect pin
dt-bindings: at24: make wp-gpios a reference to the property defined by nvmem
eeprom: at24: remove the write-protect pin support
dt-bindings: at25: add reference for the wp-gpios property
Krzysztof Kozlowski (6):
i2c: stu300: Use proper printk format for iomem pointer
i2c: pmcmsp: Use proper printk format for resource_size_t
i2c: pnx: Use proper printk format for resource_size_t
i2c: highlander: Use proper printk format for size_t
i2c: Enable compile testing for more drivers
i2c: exynos: Update Kconfig documentation
Luca Ceresoli (29):
i2c: remove unneeded 'extern' from function declatations
docs: i2c: sort index logically
docs: i2c: summary: extend introduction
docs: i2c: summary: rewrite the "terminology" section
docs: i2c: call it "I2C" consistently
docs: i2c: fix typo
docs: i2c: replace "I2C-transfer" -> "I2C transfer" consistently
docs: i2c: i2c-protocol: fix kernel-doc function syntax
docs: i2c: i2c-protocol: properly name start and stop conditions
docs: i2c: i2c-protocol: remove unneeded colons from table
docs: i2c: i2c-protocol: use proper names for ACK and NACK
docs: i2c: smbus-protocol: fix link syntax
docs: i2c: smbus-protocol: properly name start and stop conditions
docs: i2c: smbus-protocol: remove unneeded colons from table
docs: i2c: smbus-protocol: use proper names for ACK and NACK
docs: i2c: smbus-protocol: enable kernel-doc function syntax
docs: i2c: smbus-protocol: fix kernel-doc function syntax
docs: i2c: smbus-protocol: fix typo
docs: i2c: smbus-protocol: fix punctuation
docs: i2c: smbus-protocol: improve I2C Block transactions description
docs: i2c: instantiating-devices: fix internal hyperlink
docs: i2c: instantiating-devices: rearrange static instatiation
docs: i2c: instantiating-devices: use monospace for sysfs attributes
docs: i2c: old-module-parameters: fix internal hyperlink
docs: i2c: old-module-parameters: clarify this is for obsolete kernels
docs: i2c: old-module-parameters: use monospace instead of ""
docs: i2c: rename sections so the overall picture is clearer
docs: i2c: i2c-protocol: use same wording as smbus-protocol
docs: i2c: writing-clients: properly name the stop condition
Martin Blumenstingl (1):
i2c: meson: implement the master_xfer_atomic callback
Michal Simek (1):
i2c: cadence: Fix wording in i2c-cadence driver
Peter Rosin (1):
i2c: mux: pca9541: use the BIT macro
Raul E Rangel (1):
i2c: cros-ec-tunnel: Fix ACPI identifier
Shubhrajyoti Datta (3):
i2c: xiic: Add timeout to the rx fifo wait loop
i2c: xiic: Fix the clocking across bind unbind
i2c: cadence: Fix error printing in case of defer
Topi Kuutela (1):
i2c: cadence: Fix power management order of operations
Venkatesh Yadav Abbarapu (1):
i2c: xiic: defer the probe if clock is not found
Wolfram Sang (18):
i2c: parport-light: remove driver
i2c: parport: simplify Kconfig description
i2c: parport: move include file into main source
Merge branch 'i2c/for-current' into i2c/for-5.6
i2c: cht-wc: convert to use i2c_new_client_device()
i2c: i801: convert to use i2c_new_client_device()
i2c: nvidia-gpu: convert to use i2c_new_client_device()
i2c: ocores: convert to use i2c_new_client_device()
i2c: powermac: convert to use i2c_new_client_device()
i2c: taos-evm: convert to use i2c_new_client_device()
i2c: xiic: convert to use i2c_new_client_device()
i2c: i2c-core-acpi: convert to use i2c_new_client_device()
i2c: i2c-core-base: convert to use i2c_new_client_device()
i2c: i2c-core-of: convert to use i2c_new_client_device()
docs: i2c: use the new API in 'instantiating-devices.rst'
docs: i2c: use the new API in 'writing-clients'
Merge tag 'at24-updates-for-v5.6' of git://git.kernel.org/.../brgl/linux into i2c/for-5.6
Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-5.6
周琰杰 (Zhou Yanjie) (2):
dt-bindings: I2C: Add X1000 bindings.
I2C: JZ4780: Add support for the X1000.
with much appreciated quality assurance from
----------------------------------------------------------------
Andrew Lunn (1):
(Rev.) i2c: ocores: convert to use i2c_new_client_device()
Enric Balletbo i Serra (1):
(Rev.) i2c: cros-ec-tunnel: Fix slave device enumeration
Guenter Roeck (1):
(Rev.) i2c: mux: pca9541: use the BIT macro
Hans de Goede (2):
(Test) i2c: cht-wc: convert to use i2c_new_client_device()
(Rev.) i2c: cht-wc: convert to use i2c_new_client_device()
Ioana Ciornei (1):
(Test) i2c: mux: pca954x: support property idle-state
Jean Delvare (36):
(Rev.) i2c: i801: Add support for Intel Comet Lake PCH-V
(Rev.) docs: i2c: writing-clients: properly name the stop condition
(Rev.) docs: i2c: i2c-protocol: use same wording as smbus-protocol
(Rev.) docs: i2c: rename sections so the overall picture is clearer
(Rev.) docs: i2c: old-module-parameters: use monospace instead of ""
(Rev.) docs: i2c: old-module-parameters: clarify this is for obsolete kernels
(Rev.) docs: i2c: old-module-parameters: fix internal hyperlink
(Rev.) docs: i2c: instantiating-devices: use monospace for sysfs attributes
(Rev.) docs: i2c: instantiating-devices: rearrange static instatiation
(Rev.) docs: i2c: instantiating-devices: fix internal hyperlink
(Rev.) docs: i2c: smbus-protocol: improve I2C Block transactions description
(Rev.) docs: i2c: smbus-protocol: fix punctuation
(Rev.) docs: i2c: smbus-protocol: fix typo
(Rev.) docs: i2c: smbus-protocol: fix kernel-doc function syntax
(Rev.) docs: i2c: smbus-protocol: enable kernel-doc function syntax
(Rev.) docs: i2c: smbus-protocol: use proper names for ACK and NACK
(Rev.) docs: i2c: smbus-protocol: remove unneeded colons from table
(Rev.) docs: i2c: smbus-protocol: properly name start and stop conditions
(Rev.) docs: i2c: smbus-protocol: fix link syntax
(Rev.) docs: i2c: i2c-protocol: use proper names for ACK and NACK
(Rev.) docs: i2c: i2c-protocol: remove unneeded colons from table
(Rev.) docs: i2c: i2c-protocol: properly name start and stop conditions
(Rev.) docs: i2c: i2c-protocol: fix kernel-doc function syntax
(Rev.) docs: i2c: replace "I2C-transfer" -> "I2C transfer" consistently
(Rev.) docs: i2c: fix typo
(Rev.) docs: i2c: call it "I2C" consistently
(Rev.) docs: i2c: summary: rewrite the "terminology" section
(Rev.) docs: i2c: summary: extend introduction
(Rev.) docs: i2c: sort index logically
(Rev.) i2c: parport: fix spelling mistake: "Atmost" -> "At most"
(Rev.) i2c: taos-evm: convert to use i2c_new_client_device()
(Test) i2c: taos-evm: convert to use i2c_new_client_device()
(Rev.) i2c: i801: convert to use i2c_new_client_device()
(Rev.) i2c: parport: move include file into main source
(Rev.) i2c: parport: simplify Kconfig description
(Rev.) i2c: parport-light: remove driver
Kieran Bingham (1):
(Rev.) i2c: core: Use DEVICE_ATTR_*() helper macros
Linus Walleij (5):
(Rev.) i2c: stu300: Use proper printk format for iomem pointer
(Rev.) eeprom: at24: remove the write-protect pin support
(Rev.) dt-bindings: at24: make wp-gpios a reference to the property defined by nvmem
(Rev.) nvmem: add support for the write-protect pin
(Rev.) dt-bindings: nvmem: new optional property wp-gpios
Luca Ceresoli (1):
(Rev.) i2c: core: Use DEVICE_ATTR_*() helper macros
Ludovic Desroches (1):
(Rev.) i2c: at91: remote default value initialization
Michal Simek (1):
(Rev.) i2c: cadence: Handle transfer_size rollover
Neil Armstrong (1):
(Rev.) i2c: meson: implement the master_xfer_atomic callback
Peter Korsgaard (1):
(Rev.) i2c: ocores: convert to use i2c_new_client_device()
Rob Herring (5):
(Rev.) dt-binding: eeprom: at24: add vcc-supply property
(Rev.) dt-bindings: at25: add reference for the wp-gpios property
(Rev.) dt-bindings: at24: make wp-gpios a reference to the property defined by nvmem
(Rev.) dt-bindings: nvmem: new optional property wp-gpios
(Rev.) dt-bindings: i2c: support property idle-state
Shubhrajyoti Datta (2):
(Rev.) i2c: cadence: Handle transfer_size rollover
(Rev.) i2c: xiic: fix indentation issue
Thierry Reding (8):
(Test) i2c: tegra: Check DMA completion status in addition to left time
(Test) i2c: tegra: Always terminate DMA transfer
(Test) i2c: tegra: Use relaxed versions of readl/writel
(Test) i2c: tegra: Rename I2C_PIO_MODE_MAX_LEN to I2C_PIO_MODE_PREFERRED_LEN
(Test) i2c: tegra: Support atomic transfers
(Test) i2c: tegra: Prevent interrupt triggering after transfer timeout
(Test) i2c: tegra: Properly disable runtime PM on driver's probe error
(Test) i2c: tegra: Fix suspending in active runtime PM state
Vladimir Zapolskiy (1):
(Rev.) i2c: mux: pca9541: use the BIT macro
Documentation/devicetree/bindings/eeprom/at24.yaml | 9 +-
Documentation/devicetree/bindings/eeprom/at25.txt | 2 +
Documentation/devicetree/bindings/i2c/i2c-at91.txt | 14 +-
.../devicetree/bindings/i2c/i2c-jz4780.txt | 4 +-
.../devicetree/bindings/i2c/i2c-mux-pca954x.txt | 2 +
.../devicetree/bindings/i2c/renesas,i2c.txt | 3 +-
.../devicetree/bindings/i2c/renesas,iic.txt | 1 +
Documentation/devicetree/bindings/nvmem/nvmem.yaml | 11 +
Documentation/i2c/busses/i2c-parport-light.rst | 24 -
Documentation/i2c/busses/index.rst | 1 -
Documentation/i2c/dev-interface.rst | 24 +-
Documentation/i2c/dma-considerations.rst | 2 +-
Documentation/i2c/i2c-protocol.rst | 45 +-
Documentation/i2c/i2c-topology.rst | 72 +-
Documentation/i2c/i2c.svg | 1341 ++++++++++++++++++++
Documentation/i2c/index.rst | 58 +-
Documentation/i2c/instantiating-devices.rst | 123 +-
Documentation/i2c/old-module-parameters.rst | 31 +-
Documentation/i2c/slave-interface.rst | 4 +-
Documentation/i2c/smbus-protocol.rst | 107 +-
Documentation/i2c/summary.rst | 62 +-
Documentation/i2c/writing-clients.rst | 36 +-
MAINTAINERS | 2 -
drivers/i2c/busses/Kconfig | 107 +-
drivers/i2c/busses/Makefile | 1 -
drivers/i2c/busses/i2c-at91-core.c | 39 -
drivers/i2c/busses/i2c-cadence.c | 32 +-
drivers/i2c/busses/i2c-cht-wc.c | 6 +-
drivers/i2c/busses/i2c-cros-ec-tunnel.c | 3 +-
drivers/i2c/busses/i2c-highlander.c | 2 +-
drivers/i2c/busses/i2c-i801.c | 10 +-
drivers/i2c/busses/i2c-jz4780.c | 156 ++-
drivers/i2c/busses/i2c-meson.c | 97 +-
drivers/i2c/busses/i2c-nvidia-gpu.c | 6 +-
drivers/i2c/busses/i2c-ocores.c | 2 +-
drivers/i2c/busses/i2c-parport-light.c | 267 ----
drivers/i2c/busses/i2c-parport.c | 113 +-
drivers/i2c/busses/i2c-parport.h | 106 --
drivers/i2c/busses/i2c-pmcmsp.c | 6 +-
drivers/i2c/busses/i2c-pnx.c | 4 +-
drivers/i2c/busses/i2c-powermac.c | 8 +-
drivers/i2c/busses/i2c-stm32f7.c | 117 +-
drivers/i2c/busses/i2c-stu300.c | 2 +-
drivers/i2c/busses/i2c-taos-evm.c | 4 +-
drivers/i2c/busses/i2c-tegra.c | 216 ++--
drivers/i2c/busses/i2c-tiny-usb.c | 8 +-
drivers/i2c/busses/i2c-xiic.c | 69 +-
drivers/i2c/i2c-core-acpi.c | 12 +-
drivers/i2c/i2c-core-base.c | 33 +-
drivers/i2c/i2c-core-of.c | 7 +-
drivers/i2c/muxes/i2c-mux-pca9541.c | 29 +-
drivers/i2c/muxes/i2c-mux-pca954x.c | 69 +-
drivers/misc/eeprom/at24.c | 72 +-
drivers/nvmem/core.c | 19 +-
drivers/nvmem/nvmem.h | 2 +
include/linux/i2c.h | 115 +-
include/linux/nvmem-provider.h | 3 +
57 files changed, 2604 insertions(+), 1116 deletions(-)
delete mode 100644 Documentation/i2c/busses/i2c-parport-light.rst
create mode 100644 Documentation/i2c/i2c.svg
delete mode 100644 drivers/i2c/busses/i2c-parport-light.c
delete mode 100644 drivers/i2c/busses/i2c-parport.h
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-03-15 2:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-29 20:17 [PULL REQUEST] i2c for v5.6 Wolfram Sang
2020-03-01 1:25 ` pr-tracker-bot
-- strict thread matches above, loose matches on Subject: below --
2020-03-14 21:08 Wolfram Sang
2020-03-15 2:00 ` pr-tracker-bot
2020-02-07 17:19 Wolfram Sang
2020-02-07 21:55 ` pr-tracker-bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).