linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>
To: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	tsbogend@alpha.franken.de, paulburton@kernel.org,
	jiaxun.yang@flygoat.com, chenhc@lemote.com, tglx@linutronix.de,
	robh+dt@kernel.org, daniel.lezcano@linaro.org,
	keescook@chromium.org, paul@crapouillou.net, krzk@kernel.org,
	hns@goldelico.com, ebiederm@xmission.com,
	dongsheng.qiu@ingenic.com, yanfei.li@ingenic.com,
	sernia.zhou@foxmail.com, zhenwenjin@gmail.com
Subject: [PATCH v7 1/6] MIPS: JZ4780: Introduce SMP support.
Date: Thu, 14 May 2020 02:46:12 +0800	[thread overview]
Message-ID: <1589395578-87441-3-git-send-email-zhouyanjie@wanyeetech.com> (raw)
In-Reply-To: <1589395578-87441-1-git-send-email-zhouyanjie@wanyeetech.com>

Forward port smp support from kernel 3.18.3 of CI20_linux
to upstream kernel 5.6.

Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---

Notes:
    v1->v2:
    1.Remove unnecessary "plat_irq_dispatch(void)" in irq-ingenic.c.
    2.Add a timeout check for "jz4780_boot_secondary()" to avoid a dead loop.
    3.Replace hard code in smp.c with macro.
    
    v2->v3:
    1.Remove unnecessary "extern void (*r4k_blast_dcache)(void)" in smp.c.
    2.Use "for_each_of_cpu_node" instead "for_each_compatible_node" in smp.c.
    3.Use "of_cpu_node_to_id" instead "of_property_read_u32_index" in smp.c.
    4.Move LCR related operations to jz4780-cgu.c.
    
    v3->v4:
    Rebase on top of kernel 5.6-rc1.
    
    v4->v5:
    1.Splitting changes involving "jz4780-cgu.c" into separate commit.
    2.Use "request_irq()" replace "setup_irq()".
    
    v5->v6:
    In order to have a kernel that works on multiple SoCs at the same
    time, use "IS_ENABLED()" replace "#ifdef".
    
    v6->v7:
    1.SMP has be decoupled from the SoC version.
    2.Add mailboxes 3 and 4 for XBurst.
    3.Adjust code in "jz4780_smp_prepare_cpus()".
    4."jz4780_smp_init()" has be marked "__init".

 arch/mips/include/asm/mach-jz4740/smp.h |  87 +++++++++++
 arch/mips/jz4740/Kconfig                |   2 +
 arch/mips/jz4740/Makefile               |   5 +
 arch/mips/jz4740/prom.c                 |   4 +
 arch/mips/jz4740/smp-entry.S            |  57 +++++++
 arch/mips/jz4740/smp.c                  | 258 ++++++++++++++++++++++++++++++++
 arch/mips/kernel/idle.c                 |  35 ++++-
 7 files changed, 447 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/include/asm/mach-jz4740/smp.h
 create mode 100644 arch/mips/jz4740/smp-entry.S
 create mode 100644 arch/mips/jz4740/smp.c

diff --git a/arch/mips/include/asm/mach-jz4740/smp.h b/arch/mips/include/asm/mach-jz4740/smp.h
new file mode 100644
index 00000000..86f660f
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/smp.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Copyright (C) 2013, Paul Burton <paul.burton@imgtec.com>
+ *  JZ4780 SMP definitions
+ */
+
+#ifndef __MIPS_ASM_MACH_JZ4740_SMP_H__
+#define __MIPS_ASM_MACH_JZ4740_SMP_H__
+
+#define read_c0_corectrl()		__read_32bit_c0_register($12, 2)
+#define write_c0_corectrl(val)		__write_32bit_c0_register($12, 2, val)
+
+#define read_c0_corestatus()		__read_32bit_c0_register($12, 3)
+#define write_c0_corestatus(val)	__write_32bit_c0_register($12, 3, val)
+
+#define read_c0_reim()			__read_32bit_c0_register($12, 4)
+#define write_c0_reim(val)		__write_32bit_c0_register($12, 4, val)
+
+#define read_c0_mailbox0()		__read_32bit_c0_register($20, 0)
+#define write_c0_mailbox0(val)		__write_32bit_c0_register($20, 0, val)
+
+#define read_c0_mailbox1()		__read_32bit_c0_register($20, 1)
+#define write_c0_mailbox1(val)		__write_32bit_c0_register($20, 1, val)
+
+#define read_c0_mailbox2()		__read_32bit_c0_register($20, 2)
+#define write_c0_mailbox2(val)		__write_32bit_c0_register($20, 2, val)
+
+#define read_c0_mailbox3()		__read_32bit_c0_register($20, 3)
+#define write_c0_mailbox3(val)		__write_32bit_c0_register($20, 3, val)
+
+#define smp_clr_pending(mask) do {		\
+		unsigned int stat;		\
+		stat = read_c0_corestatus();	\
+		stat &= ~((mask) & 0xff);	\
+		write_c0_corestatus(stat);	\
+	} while (0)
+
+/*
+ * Core Control register
+ */
+#define CORECTRL_SLEEP1M_SHIFT	17
+#define CORECTRL_SLEEP1M	(_ULCAST_(0x1) << CORECTRL_SLEEP1M_SHIFT)
+#define CORECTRL_SLEEP0M_SHIFT	16
+#define CORECTRL_SLEEP0M	(_ULCAST_(0x1) << CORECTRL_SLEEP0M_SHIFT)
+#define CORECTRL_RPC1_SHIFT	9
+#define CORECTRL_RPC1		(_ULCAST_(0x1) << CORECTRL_RPC1_SHIFT)
+#define CORECTRL_RPC0_SHIFT	8
+#define CORECTRL_RPC0		(_ULCAST_(0x1) << CORECTRL_RPC0_SHIFT)
+#define CORECTRL_SWRST1_SHIFT	1
+#define CORECTRL_SWRST1		(_ULCAST_(0x1) << CORECTRL_SWRST1_SHIFT)
+#define CORECTRL_SWRST0_SHIFT	0
+#define CORECTRL_SWRST0		(_ULCAST_(0x1) << CORECTRL_SWRST0_SHIFT)
+
+/*
+ * Core Status register
+ */
+#define CORESTATUS_SLEEP1_SHIFT	17
+#define CORESTATUS_SLEEP1	(_ULCAST_(0x1) << CORESTATUS_SLEEP1_SHIFT)
+#define CORESTATUS_SLEEP0_SHIFT	16
+#define CORESTATUS_SLEEP0	(_ULCAST_(0x1) << CORESTATUS_SLEEP0_SHIFT)
+#define CORESTATUS_IRQ1P_SHIFT	9
+#define CORESTATUS_IRQ1P	(_ULCAST_(0x1) << CORESTATUS_IRQ1P_SHIFT)
+#define CORESTATUS_IRQ0P_SHIFT	8
+#define CORESTATUS_IRQ0P	(_ULCAST_(0x1) << CORESTATUS_IRQ8P_SHIFT)
+#define CORESTATUS_MIRQ1P_SHIFT	1
+#define CORESTATUS_MIRQ1P	(_ULCAST_(0x1) << CORESTATUS_MIRQ1P_SHIFT)
+#define CORESTATUS_MIRQ0P_SHIFT	0
+#define CORESTATUS_MIRQ0P	(_ULCAST_(0x1) << CORESTATUS_MIRQ0P_SHIFT)
+
+/*
+ * Reset Entry & IRQ Mask register
+ */
+#define REIM_ENTRY_SHIFT	16
+#define REIM_ENTRY		(_ULCAST_(0xffff) << REIM_ENTRY_SHIFT)
+#define REIM_IRQ1M_SHIFT	9
+#define REIM_IRQ1M		(_ULCAST_(0x1) << REIM_IRQ1M_SHIFT)
+#define REIM_IRQ0M_SHIFT	8
+#define REIM_IRQ0M		(_ULCAST_(0x1) << REIM_IRQ0M_SHIFT)
+#define REIM_MBOXIRQ1M_SHIFT	1
+#define REIM_MBOXIRQ1M		(_ULCAST_(0x1) << REIM_MBOXIRQ1M_SHIFT)
+#define REIM_MBOXIRQ0M_SHIFT	0
+#define REIM_MBOXIRQ0M		(_ULCAST_(0x1) << REIM_MBOXIRQ0M_SHIFT)
+
+extern void jz4780_smp_init(void);
+extern void jz4780_secondary_cpu_entry(void);
+
+#endif /* __MIPS_ASM_MACH_JZ4740_SMP_H__ */
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 412d2fa..2b88557 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -34,9 +34,11 @@ config MACH_JZ4770
 
 config MACH_JZ4780
 	bool
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select MIPS_CPU_SCACHE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_SMP
 
 config MACH_X1000
 	bool
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 6de14c0..0a0f024 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -12,3 +12,8 @@ CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
 # PM support
 
 obj-$(CONFIG_PM) += pm.o
+
+# SMP support
+
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_SMP) += smp-entry.o
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index ff4555c..4acf5c2c 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -8,10 +8,14 @@
 
 #include <asm/bootinfo.h>
 #include <asm/fw/fw.h>
+#include <asm/mach-jz4740/smp.h>
 
 void __init prom_init(void)
 {
 	fw_init_cmdline();
+
+	if (IS_ENABLED(CONFIG_SMP))
+		jz4780_smp_init();
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/jz4740/smp-entry.S b/arch/mips/jz4740/smp-entry.S
new file mode 100644
index 00000000..20049a3
--- /dev/null
+++ b/arch/mips/jz4740/smp-entry.S
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Copyright (C) 2013, Paul Burton <paul.burton@imgtec.com>
+ *  JZ4780 SMP entry point
+ */
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheops.h>
+#include <asm/mipsregs.h>
+
+#define CACHE_SIZE (32 * 1024)
+#define CACHE_LINESIZE 32
+
+.extern jz4780_cpu_entry_sp
+.extern jz4780_cpu_entry_gp
+
+.section .text.smp-entry
+.balign 0x10000
+.set noreorder
+LEAF(jz4780_secondary_cpu_entry)
+	mtc0	zero, CP0_CAUSE
+
+	li	t0, ST0_CU0
+	mtc0	t0, CP0_STATUS
+
+	/* cache setup */
+	li	t0, KSEG0
+	ori	t1, t0, CACHE_SIZE
+	mtc0	zero, CP0_TAGLO, 0
+1:	cache	Index_Store_Tag_I, 0(t0)
+	cache	Index_Store_Tag_D, 0(t0)
+	bne	t0, t1, 1b
+	 addiu	t0, t0, CACHE_LINESIZE
+
+	/* kseg0 cache attribute */
+	mfc0	t0, CP0_CONFIG, 0
+	ori	t0, t0, CONF_CM_CACHABLE_NONCOHERENT
+	mtc0	t0, CP0_CONFIG, 0
+
+	/* pagemask */
+	mtc0	zero, CP0_PAGEMASK, 0
+
+	/* retrieve sp */
+	la	t0, jz4780_cpu_entry_sp
+	lw	sp, 0(t0)
+
+	/* retrieve gp */
+	la	t0, jz4780_cpu_entry_gp
+	lw	gp, 0(t0)
+
+	/* jump to the kernel in kseg0 */
+	la	t0, smp_bootstrap
+	jr	t0
+	 nop
+	END(jz4780_secondary_cpu_entry)
diff --git a/arch/mips/jz4740/smp.c b/arch/mips/jz4740/smp.c
new file mode 100644
index 00000000..d95d22a
--- /dev/null
+++ b/arch/mips/jz4740/smp.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2013, Paul Burton <paul.burton@imgtec.com>
+ *  JZ4780 SMP
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/smp.h>
+#include <linux/tick.h>
+#include <asm/mach-jz4740/smp.h>
+#include <asm/smp-ops.h>
+
+static struct clk *cpu_clock_gates[CONFIG_NR_CPUS] = { NULL };
+
+u32 jz4780_cpu_entry_sp;
+u32 jz4780_cpu_entry_gp;
+
+static struct cpumask cpu_running;
+
+static DEFINE_SPINLOCK(smp_lock);
+
+static irqreturn_t mbox_handler(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+	u32 action, status;
+
+	spin_lock(&smp_lock);
+
+	switch (cpu) {
+	case 0:
+		action = read_c0_mailbox0();
+		write_c0_mailbox0(0);
+		break;
+	case 1:
+		action = read_c0_mailbox1();
+		write_c0_mailbox1(0);
+		break;
+	case 2:
+		action = read_c0_mailbox2();
+		write_c0_mailbox2(0);
+		break;
+	case 3:
+		action = read_c0_mailbox3();
+		write_c0_mailbox3(0);
+		break;
+	default:
+		panic("unhandled cpu %d!", cpu);
+	}
+
+	/* clear pending mailbox interrupt */
+	status = read_c0_corestatus();
+	status &= ~(CORESTATUS_MIRQ0P << cpu);
+	write_c0_corestatus(status);
+
+	spin_unlock(&smp_lock);
+
+	if (action & SMP_RESCHEDULE_YOURSELF)
+		scheduler_ipi();
+	if (action & SMP_CALL_FUNCTION)
+		generic_smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static void jz4780_smp_setup(void)
+{
+	u32 addr, reim;
+	int cpu;
+
+	reim = read_c0_reim();
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		__cpu_number_map[cpu] = cpu;
+		__cpu_logical_map[cpu] = cpu;
+		set_cpu_possible(cpu, true);
+	}
+
+	/* mask mailbox interrupts for this core */
+	reim &= ~REIM_MBOXIRQ0M;
+	write_c0_reim(reim);
+
+	/* clear mailboxes & pending mailbox IRQs */
+	write_c0_mailbox0(0);
+	write_c0_mailbox1(0);
+	write_c0_corestatus(0);
+
+	/* set reset entry point */
+	addr = KSEG1ADDR((u32)&jz4780_secondary_cpu_entry);
+	WARN_ON(addr & ~REIM_ENTRY);
+	reim &= ~REIM_ENTRY;
+	reim |= addr & REIM_ENTRY;
+
+	/* unmask mailbox interrupts for this core */
+	reim |= REIM_MBOXIRQ0M;
+	write_c0_reim(reim);
+	set_c0_status(STATUSF_IP3);
+	irq_enable_hazard();
+
+	cpumask_set_cpu(cpu, &cpu_running);
+}
+
+static void jz4780_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *cpu_node;
+	unsigned cpu, ctrl;
+	int err;
+
+	/* setup the mailbox IRQ */
+	err = request_irq(MIPS_CPU_IRQ_BASE + 3, mbox_handler,
+			IRQF_PERCPU | IRQF_NO_THREAD, "core mailbox", NULL);
+	if (err)
+		pr_err("request_irq() on core mailbox failed\n");
+
+	ctrl = read_c0_corectrl();
+
+	for_each_of_cpu_node(cpu_node) {
+		cpu = of_cpu_node_to_id(cpu_node);
+		if (cpu < 0) {
+			pr_err("Failed to read index of %s\n",
+			       cpu_node->full_name);
+			continue;
+		}
+
+		/* use reset entry point from REIM register */
+		ctrl |= CORECTRL_RPC0 << cpu;
+
+		cpu_clock_gates[cpu] = of_clk_get(cpu_node, 0);
+		if (IS_ERR(cpu_clock_gates[cpu])) {
+			cpu_clock_gates[cpu] = NULL;
+			continue;
+		}
+
+		err = clk_prepare(cpu_clock_gates[cpu]);
+		if (err)
+			pr_err("Failed to prepare CPU clock gate\n");
+	}
+
+	write_c0_corectrl(ctrl);
+}
+
+static int jz4780_boot_secondary(int cpu, struct task_struct *idle)
+{
+	unsigned long flags;
+	u32 ctrl;
+
+	spin_lock_irqsave(&smp_lock, flags);
+
+	/* ensure the core is in reset */
+	ctrl = read_c0_corectrl();
+	ctrl |= CORECTRL_SWRST0 << cpu;
+	write_c0_corectrl(ctrl);
+
+	/* ungate core clock */
+	if (cpu_clock_gates[cpu])
+		clk_enable(cpu_clock_gates[cpu]);
+
+	/* set entry sp/gp register values */
+	jz4780_cpu_entry_sp = __KSTK_TOS(idle);
+	jz4780_cpu_entry_gp = (u32)task_thread_info(idle);
+	smp_wmb();
+
+	/* take the core out of reset */
+	ctrl &= ~(CORECTRL_SWRST0 << cpu);
+	write_c0_corectrl(ctrl);
+
+	cpumask_set_cpu(cpu, &cpu_running);
+
+	spin_unlock_irqrestore(&smp_lock, flags);
+
+	return 0;
+}
+
+static void jz4780_init_secondary(void)
+{
+}
+
+static void jz4780_smp_finish(void)
+{
+	u32 reim;
+
+	spin_lock(&smp_lock);
+
+	/* unmask mailbox interrupts for this core */
+	reim = read_c0_reim();
+	reim |= REIM_MBOXIRQ0M << smp_processor_id();
+	write_c0_reim(reim);
+
+	spin_unlock(&smp_lock);
+
+	/* unmask interrupts for this core */
+	change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP2 |
+			 STATUSF_IP1 | STATUSF_IP0);
+	irq_enable_hazard();
+
+	/* force broadcast timer */
+	tick_broadcast_force();
+}
+
+static void jz4780_send_ipi_single_locked(int cpu, unsigned int action)
+{
+	u32 mbox;
+
+	switch (cpu) {
+	case 0:
+		mbox = read_c0_mailbox0();
+		write_c0_mailbox0(mbox | action);
+		break;
+	case 1:
+		mbox = read_c0_mailbox1();
+		write_c0_mailbox1(mbox | action);
+		break;
+	default:
+		panic("unhandled cpu %d!", cpu);
+	}
+}
+
+static void jz4780_send_ipi_single(int cpu, unsigned int action)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&smp_lock, flags);
+	jz4780_send_ipi_single_locked(cpu, action);
+	spin_unlock_irqrestore(&smp_lock, flags);
+}
+
+static void jz4780_send_ipi_mask(const struct cpumask *mask,
+				 unsigned int action)
+{
+	unsigned long flags;
+	int cpu;
+
+	spin_lock_irqsave(&smp_lock, flags);
+
+	for_each_cpu(cpu, mask)
+		jz4780_send_ipi_single_locked(cpu, action);
+
+	spin_unlock_irqrestore(&smp_lock, flags);
+}
+
+static struct plat_smp_ops jz4780_smp_ops = {
+	.send_ipi_single = jz4780_send_ipi_single,
+	.send_ipi_mask = jz4780_send_ipi_mask,
+	.init_secondary = jz4780_init_secondary,
+	.smp_finish = jz4780_smp_finish,
+	.boot_secondary = jz4780_boot_secondary,
+	.smp_setup = jz4780_smp_setup,
+	.prepare_cpus = jz4780_smp_prepare_cpus,
+};
+
+void __init jz4780_smp_init(void)
+{
+	register_smp_ops(&jz4780_smp_ops);
+}
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 37f8e78..d33f2d4 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -18,6 +18,7 @@
 #include <asm/cpu-type.h>
 #include <asm/idle.h>
 #include <asm/mipsregs.h>
+#include <asm/r4kcache.h>
 
 /*
  * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
@@ -88,6 +89,34 @@ static void __cpuidle rm7k_wait_irqoff(void)
 }
 
 /*
+ * The Ingenic jz4780 SMP variant has to write back dirty cache lines before
+ * executing wait. The CPU & cache clock will be gated until we return from
+ * the wait, and if another core attempts to access data from our data cache
+ * during this time then it will lock up.
+ */
+void jz4780_smp_wait_irqoff(void)
+{
+	unsigned long pending = read_c0_cause() & read_c0_status() & CAUSEF_IP;
+
+	/*
+	 * Going to idle has a significant overhead due to the cache flush so
+	 * try to avoid it if we'll immediately be woken again due to an IRQ.
+	 */
+	if (!need_resched() && !pending) {
+		r4k_blast_dcache();
+
+		__asm__(
+		"	.set push	\n"
+		"	.set mips3	\n"
+		"	sync		\n"
+		"	wait		\n"
+		"	.set pop	\n");
+	}
+
+	local_irq_enable();
+}
+
+/*
  * Au1 'wait' is only useful when the 32kHz counter is used as timer,
  * since coreclock (and the cp0 counter) stops upon executing it. Only an
  * interrupt can wake it, so they must be enabled before entering idle modes.
@@ -172,7 +201,6 @@ void __init check_wait(void)
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
 	case CPU_CAVIUM_OCTEON3:
-	case CPU_XBURST:
 	case CPU_LOONGSON32:
 	case CPU_XLR:
 	case CPU_XLP:
@@ -246,6 +274,11 @@ void __init check_wait(void)
 		   cpu_wait = r4k_wait;
 		 */
 		break;
+	case CPU_XBURST:
+		if (IS_ENABLED(CONFIG_SMP))
+			cpu_wait = jz4780_smp_wait_irqoff;
+		else
+			cpu_wait = r4k_wait;
 	default:
 		break;
 	}
-- 
2.7.4


  parent reply	other threads:[~2020-05-13 18:47 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-13 18:46 Introduce SMP support for CI20 (based on JZ4780) v7 周琰杰 (Zhou Yanjie)
2020-05-13 18:46 ` [PATCH v7 0/6] Introduce SMP support for CI20 (based on JZ4780) 周琰杰 (Zhou Yanjie)
2020-05-13 18:46 ` 周琰杰 (Zhou Yanjie) [this message]
2020-05-13 18:46 ` [PATCH v7 2/6] MIPS: CI20: Modify DTS to support high resolution timer for SMP 周琰杰 (Zhou Yanjie)
2020-05-13 18:46 ` [PATCH v7 3/6] clocksource: Ingenic: Add high resolution timer support " 周琰杰 (Zhou Yanjie)
2020-05-14 14:10   ` kbuild test robot
2020-05-13 18:46 ` [PATCH v7 4/6] dt-bindings: MIPS: Document Ingenic SoCs binding 周琰杰 (Zhou Yanjie)
2020-05-13 18:46 ` [PATCH v7 5/6] MIPS: Ingenic: Add 'cpus' node for Ingenic SoCs 周琰杰 (Zhou Yanjie)
2020-05-13 18:46 ` [PATCH v7 6/6] MIPS: CI20: Update defconfig to support SMP 周琰杰 (Zhou Yanjie)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1589395578-87441-3-git-send-email-zhouyanjie@wanyeetech.com \
    --to=zhouyanjie@wanyeetech.com \
    --cc=chenhc@lemote.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dongsheng.qiu@ingenic.com \
    --cc=ebiederm@xmission.com \
    --cc=hns@goldelico.com \
    --cc=jiaxun.yang@flygoat.com \
    --cc=keescook@chromium.org \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=paul@crapouillou.net \
    --cc=paulburton@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sernia.zhou@foxmail.com \
    --cc=tglx@linutronix.de \
    --cc=tsbogend@alpha.franken.de \
    --cc=yanfei.li@ingenic.com \
    --cc=zhenwenjin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).