[PATCH v2] MIPS: Loongson: Enable devicetree based probing for 8250 ports in defconfig

[PATCH v2] MIPS: Loongson: Enable devicetree based probing for 8250 ports in defconfig

[Tiezhu Yang]

After commit 87fcfa7b7fe6 ("MIPS: Loongson64: Add generic dts"),
there already exists the node and property of Loongson CPU UART0
in loongson3-package.dtsi:

cpu_uart0: serial@1fe001e0 {
        compatible = "ns16550a";
        reg = <0 0x1fe001e0 0x8>;
        clock-frequency = <33000000>;
        interrupt-parent = <&liointc>;
        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
        no-loopback-test;
};

In order to support for serial console on the Loongson platform,
add CONFIG_SERIAL_OF_PLATFORM=y to loongson3_defconfig.

With this patch, we can see the following boot messages:

[    1.877745] printk: console [ttyS0] disabled
[    1.881979] 1fe001e0.serial: ttyS0 at MMIO 0x1fe001e0 (irq = 16, base_baud = 2062500) is a 16550A
[    1.890838] printk: console [ttyS0] enabled

And also, we can login normally from the serial console.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---

v2:
  - Modify the patch subject

 arch/mips/configs/loongson3_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 4df2434..3d4c7e9 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -217,6 +217,7 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_HW_RANDOM=y
 CONFIG_RAW_DRIVER=m
 CONFIG_I2C_CHARDEV=y
-- 
2.1.0

Re: [PATCH v2] MIPS: Loongson: Enable devicetree based probing for 8250 ports in defconfig

[Thomas Bogendoerfer]

On Mon, May 18, 2020 at 10:11:01AM +0800, Tiezhu Yang wrote:
> After commit 87fcfa7b7fe6 ("MIPS: Loongson64: Add generic dts"),
> there already exists the node and property of Loongson CPU UART0
> in loongson3-package.dtsi:
> 
> cpu_uart0: serial@1fe001e0 {
>         compatible = "ns16550a";
>         reg = <0 0x1fe001e0 0x8>;
>         clock-frequency = <33000000>;
>         interrupt-parent = <&liointc>;
>         interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
>         no-loopback-test;
> };
> 
> In order to support for serial console on the Loongson platform,
> add CONFIG_SERIAL_OF_PLATFORM=y to loongson3_defconfig.
> 
> With this patch, we can see the following boot messages:
> 
> [    1.877745] printk: console [ttyS0] disabled
> [    1.881979] 1fe001e0.serial: ttyS0 at MMIO 0x1fe001e0 (irq = 16, base_baud = 2062500) is a 16550A
> [    1.890838] printk: console [ttyS0] enabled
> 
> And also, we can login normally from the serial console.
> 
> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
> 
> v2:
>   - Modify the patch subject
> 
>  arch/mips/configs/loongson3_defconfig | 1 +
>  1 file changed, 1 insertion(+)

applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]