[PATCH V2] dt-bindings: regulator: Convert anatop regulator to json-schema

[PATCH V2] dt-bindings: regulator: Convert anatop regulator to json-schema

[Anson Huang]

Convert the anatop regulator binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V1:
	- remove definition of "regulator-name" which is a standrad property;
	- add "unevaluatedProperties: false".
---
 .../bindings/regulator/anatop-regulator.txt        | 40 ---------
 .../bindings/regulator/anatop-regulator.yaml       | 94 ++++++++++++++++++++++
 2 files changed, 94 insertions(+), 40 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/anatop-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/anatop-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
deleted file mode 100644
index a3106c7..0000000
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Anatop Voltage regulators
-
-Required properties:
-- compatible: Must be "fsl,anatop-regulator"
-- regulator-name: A string used as a descriptive name for regulator outputs
-- anatop-reg-offset: Anatop MFD register offset
-- anatop-vol-bit-shift: Bit shift for the register
-- anatop-vol-bit-width: Number of bits used in the register
-- anatop-min-bit-val: Minimum value of this register
-- anatop-min-voltage: Minimum voltage of this regulator
-- anatop-max-voltage: Maximum voltage of this regulator
-
-Optional properties:
-- anatop-delay-reg-offset: Anatop MFD step time register offset
-- anatop-delay-bit-shift: Bit shift for the step time register
-- anatop-delay-bit-width: Number of bits used in the step time register
-- vin-supply: The supply for this regulator
-- anatop-enable-bit: Regulator enable bit offset
-
-Any property defined as part of the core regulator
-binding, defined in regulator.txt, can also be used.
-
-Example:
-
-	regulator-vddpu {
-		compatible = "fsl,anatop-regulator";
-		regulator-name = "vddpu";
-		regulator-min-microvolt = <725000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-always-on;
-		anatop-reg-offset = <0x140>;
-		anatop-vol-bit-shift = <9>;
-		anatop-vol-bit-width = <5>;
-		anatop-delay-reg-offset = <0x170>;
-		anatop-delay-bit-shift = <24>;
-		anatop-delay-bit-width = <2>;
-		anatop-min-bit-val = <1>;
-		anatop-min-voltage = <725000>;
-		anatop-max-voltage = <1300000>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
new file mode 100644
index 0000000..e7b3abe
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Anatop Voltage Regulators
+
+maintainers:
+  - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: fsl,anatop-regulator
+
+  regulator-name: true
+
+  anatop-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD register offset.
+
+  anatop-vol-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the register.
+
+  anatop-vol-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the register.
+
+  anatop-min-bit-val:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum value of this register.
+
+  anatop-min-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum voltage of this regulator.
+
+  anatop-max-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the maximum voltage of this regulator.
+
+  anatop-delay-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD step time register offset.
+
+  anatop-delay-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the step time register.
+
+  anatop-delay-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the step time register.
+
+  anatop-enable-bit:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing regulator enable bit offset.
+
+  vin-supply:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: input supply phandle.
+
+required:
+  - compatible
+  - regulator-name
+  - anatop-reg-offset
+  - anatop-vol-bit-shift
+  - anatop-vol-bit-width
+  - anatop-min-bit-val
+  - anatop-min-voltage
+  - anatop-max-voltage
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator-vddpu {
+        compatible = "fsl,anatop-regulator";
+        regulator-name = "vddpu";
+        regulator-min-microvolt = <725000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-always-on;
+        anatop-reg-offset = <0x140>;
+        anatop-vol-bit-shift = <9>;
+        anatop-vol-bit-width = <5>;
+        anatop-delay-reg-offset = <0x170>;
+        anatop-delay-bit-shift = <24>;
+        anatop-delay-bit-width = <2>;
+        anatop-min-bit-val = <1>;
+        anatop-min-voltage = <725000>;
+        anatop-max-voltage = <1300000>;
+    };
-- 
2.7.4

Re: [PATCH V2] dt-bindings: regulator: Convert anatop regulator to json-schema

[Rob Herring]

On Fri, 29 May 2020 09:59:11 +0800, Anson Huang wrote:
> Convert the anatop regulator binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V1:
> 	- remove definition of "regulator-name" which is a standrad property;
> 	- add "unevaluatedProperties: false".
> ---
>  .../bindings/regulator/anatop-regulator.txt        | 40 ---------
>  .../bindings/regulator/anatop-regulator.yaml       | 94 ++++++++++++++++++++++
>  2 files changed, 94 insertions(+), 40 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/regulator/anatop-regulator.txt
>  create mode 100644 Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH V2] dt-bindings: regulator: Convert anatop regulator to json-schema

[Mark Brown]

On Fri, 29 May 2020 09:59:11 +0800, Anson Huang wrote:
> Convert the anatop regulator binding to DT schema format using json-schema.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] dt-bindings: regulator: Convert anatop regulator to json-schema
      commit: 81227f49bd272cbcd9bb4650b250519c8aa22065

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark