From: Rishabh Bhatnagar <rishabhb@codeaurora.org>
To: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org,
tsoni@codeaurora.org, psodagud@codeaurora.org,
sidgup@codeaurora.org, Sibi Sankar <sibis@codeaurora.org>,
Rishabh Bhatnagar <rishabhb@codeaurora.org>
Subject: [PATCH v1 2/4] remoteproc: qcom_q6v5_mss: Replace mask based tracking with size
Date: Thu, 9 Jul 2020 13:31:54 -0700 [thread overview]
Message-ID: <1594326716-15474-3-git-send-email-rishabhb@codeaurora.org> (raw)
In-Reply-To: <1594326716-15474-1-git-send-email-rishabhb@codeaurora.org>
From: Sibi Sankar <sibis@codeaurora.org>
In order to land inline coredump support for mss, the dump_segment
function would need to support granularities less than the segment
size. This is achieved by replacing mask based tracking with size.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
drivers/remoteproc/qcom_q6v5_mss.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index feb70283b..c6ce032 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -181,8 +181,8 @@ struct q6v5 {
bool running;
bool dump_mba_loaded;
- unsigned long dump_segment_mask;
- unsigned long dump_complete_mask;
+ size_t current_dump_size;
+ size_t total_dump_size;
phys_addr_t mba_phys;
void *mba_region;
@@ -1203,7 +1203,6 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
{
int ret = 0;
struct q6v5 *qproc = rproc->priv;
- unsigned long mask = BIT((unsigned long)segment->priv);
int offset = segment->da - qproc->mpss_reloc;
void *ptr = NULL;
@@ -1229,10 +1228,10 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
memset(dest, 0xff, segment->size);
}
- qproc->dump_segment_mask |= mask;
+ qproc->current_dump_size += segment->size;
/* Reclaim mba after copying segments */
- if (qproc->dump_segment_mask == qproc->dump_complete_mask) {
+ if (qproc->current_dump_size == qproc->total_dump_size) {
if (qproc->dump_mba_loaded) {
/* Try to reset ownership back to Q6 */
q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
@@ -1274,7 +1273,7 @@ static int q6v5_start(struct rproc *rproc)
"Failed to reclaim mba buffer system may become unstable\n");
/* Reset Dump Segment Mask */
- qproc->dump_segment_mask = 0;
+ qproc->current_dump_size = 0;
qproc->running = true;
return 0;
@@ -1323,7 +1322,7 @@ static int qcom_q6v5_register_dump_segments(struct rproc *rproc,
ehdr = (struct elf32_hdr *)fw->data;
phdrs = (struct elf32_phdr *)(ehdr + 1);
- qproc->dump_complete_mask = 0;
+ qproc->total_dump_size = 0;
for (i = 0; i < ehdr->e_phnum; i++) {
phdr = &phdrs[i];
@@ -1338,7 +1337,7 @@ static int qcom_q6v5_register_dump_segments(struct rproc *rproc,
if (ret)
break;
- qproc->dump_complete_mask |= BIT(i);
+ qproc->total_dump_size += phdr->p_memsz;
}
release_firmware(fw);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-07-09 20:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-09 20:31 [PATCH v7 0/4] Extend coredump functionality Rishabh Bhatnagar
2020-07-09 20:31 ` [PATCH v7 1/4] remoteproc: Move coredump functionality to a new file Rishabh Bhatnagar
2020-07-09 20:31 ` Rishabh Bhatnagar [this message]
2020-07-14 17:18 ` [PATCH v1 2/4] remoteproc: qcom_q6v5_mss: Replace mask based tracking with size Mathieu Poirier
2020-07-14 18:12 ` Sibi Sankar
2020-07-16 8:10 ` Sibi Sankar
2020-07-16 18:24 ` rishabhb
2020-07-20 16:57 ` Mathieu Poirier
2020-07-09 20:31 ` [PATCH v7 3/4] remoteproc: Add inline coredump functionality Rishabh Bhatnagar
2020-07-14 17:53 ` Mathieu Poirier
2020-07-15 19:22 ` rishabhb
2020-07-15 21:55 ` Mathieu Poirier
2020-07-16 8:25 ` Sibi Sankar
2020-07-16 18:25 ` rishabhb
2020-07-09 20:31 ` [PATCH v7 4/4] remoteproc: Add coredump debugfs entry Rishabh Bhatnagar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1594326716-15474-3-git-send-email-rishabhb@codeaurora.org \
--to=rishabhb@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=psodagud@codeaurora.org \
--cc=sibis@codeaurora.org \
--cc=sidgup@codeaurora.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).