* [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
@ 2020-11-03 19:08 Faiz Abbas
2020-11-12 17:51 ` Nishanth Menon
0 siblings, 1 reply; 6+ messages in thread
From: Faiz Abbas @ 2020-11-03 19:08 UTC (permalink / raw)
To: linux-kernel, linux-arm-kernel
Cc: will, catalin.marinas, nm, t-kristo, faiz_abbas
Add configs to enable regulators that supply power to the SD card
on TI's J721e platform. These regulators are controlled by either
SoC gpios or gpios over i2c expander.
Changes to vmlinux size:
Before:
text data bss dec hex filename
20219067 10875634 523924 31618625 1e27641 vmlinux
After:
text data bss dec hex filename
20228755 10880422 524628 31633805 1e2b18d vmlinux
delta: 15180 (dec)
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
Changes in v3: Added changes to vmlinux size in commit message
Changes in v2: Squashed changes into a single patch
v2:
https://lore.kernel.org/linux-arm-kernel/20201102183005.14174-1-faiz_abbas@ti.com/
v1:
https://lore.kernel.org/linux-arm-kernel/20201002164535.9920-1-faiz_abbas@ti.com/
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5cfe3cf6f2ac..bbf42faaddfe 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_MESON=y
CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
CONFIG_I2C_PXA=y
CONFIG_I2C_QCOM_CCI=m
@@ -497,6 +498,7 @@ CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SM8150=y
CONFIG_PINCTRL_SM8250=y
CONFIG_GPIO_ALTERA=m
+CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MPC8XXX=y
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
2020-11-03 19:08 [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Faiz Abbas
@ 2020-11-12 17:51 ` Nishanth Menon
0 siblings, 0 replies; 6+ messages in thread
From: Nishanth Menon @ 2020-11-12 17:51 UTC (permalink / raw)
To: Faiz Abbas, linux-arm-kernel, linux-kernel
Cc: Nishanth Menon, catalin.marinas, t-kristo, will
On Wed, 4 Nov 2020 00:38:21 +0530, Faiz Abbas wrote:
> Add configs to enable regulators that supply power to the SD card
> on TI's J721e platform. These regulators are controlled by either
> SoC gpios or gpios over i2c expander.
>
> Changes to vmlinux size:
> Before:
> text data bss dec hex filename
> 20219067 10875634 523924 31618625 1e27641 vmlinux
>
> [...]
Hi Faiz Abbas,
I have applied the following to branch ti-k3-config-next on [1].
Thank you!
[1/1] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
commit: 6b133f475a97a0839f02e3c0b937886b9adc2933
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
@ 2020-11-13 15:49 Sekhar Nori
2020-11-13 17:04 ` Nishanth Menon
0 siblings, 1 reply; 6+ messages in thread
From: Sekhar Nori @ 2020-11-13 15:49 UTC (permalink / raw)
To: Nishanth Menon
Cc: Catalin Marinas, Will Deacon, linux-arm-kernel, linux-kernel, Faiz Abbas
From: Faiz Abbas <faiz_abbas@ti.com>
Add configs to help enable regulators that supply power to the SD card
on TI's J721e platform. These regulators are controlled by either
SoC gpios or gpios over i2c expander.
vmlinux size before and after patch follow:
Before:
text data bss dec hex filename
19755448 10376346 535572 30667366 1d3f266 vmlinux
After:
text data bss dec hex filename
19769232 10381390 536212 30686834 1d43e72 vmlinux
difference is 19,468 (dec)
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
changes in v3:
- add size delta as requested by Nishanth Menon
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c5f404ce2eec..e44d3f438530 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_MESON=y
CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
CONFIG_I2C_PXA=y
CONFIG_I2C_QCOM_CCI=m
@@ -498,6 +499,7 @@ CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SM8150=y
CONFIG_PINCTRL_SM8250=y
CONFIG_GPIO_ALTERA=m
+CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MPC8XXX=y
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
2020-11-13 15:49 Sekhar Nori
@ 2020-11-13 17:04 ` Nishanth Menon
2020-11-13 17:15 ` Sekhar Nori
0 siblings, 1 reply; 6+ messages in thread
From: Nishanth Menon @ 2020-11-13 17:04 UTC (permalink / raw)
To: Sekhar Nori
Cc: Catalin Marinas, Will Deacon, linux-arm-kernel, linux-kernel, Faiz Abbas
On 21:19-20201113, Sekhar Nori wrote:
> From: Faiz Abbas <faiz_abbas@ti.com>
>
> Add configs to help enable regulators that supply power to the SD card
> on TI's J721e platform. These regulators are controlled by either
> SoC gpios or gpios over i2c expander.
>
> vmlinux size before and after patch follow:
>
Sekhar,
> Before:
> text data bss dec hex filename
> 19755448 10376346 535572 30667366 1d3f266 vmlinux
>
> After:
> text data bss dec hex filename
> 19769232 10381390 536212 30686834 1d43e72 vmlinux
>
> difference is 19,468 (dec)
>
> Acked-by: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> ---
> changes in v3:
> - add size delta as requested by Nishanth Menon
https://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git/commit/?h=ti-k3-config-next&id=6b133f475a97a0839f02e3c0b937886b9adc2933
https://lore.kernel.org/linux-arm-kernel/20201103190821.30937-1-faiz_abbas@ti.com/
Is this a duplicate patch?
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index c5f404ce2eec..e44d3f438530 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y
> CONFIG_I2C_IMX_LPI2C=y
> CONFIG_I2C_MESON=y
> CONFIG_I2C_MV64XXX=y
> +CONFIG_I2C_OMAP=y
> CONFIG_I2C_OWL=y
> CONFIG_I2C_PXA=y
> CONFIG_I2C_QCOM_CCI=m
> @@ -498,6 +499,7 @@ CONFIG_PINCTRL_SDM845=y
> CONFIG_PINCTRL_SM8150=y
> CONFIG_PINCTRL_SM8250=y
> CONFIG_GPIO_ALTERA=m
> +CONFIG_GPIO_DAVINCI=y
> CONFIG_GPIO_DWAPB=y
> CONFIG_GPIO_MB86S7X=y
> CONFIG_GPIO_MPC8XXX=y
> --
> 2.17.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
2020-11-13 17:04 ` Nishanth Menon
@ 2020-11-13 17:15 ` Sekhar Nori
2020-11-13 18:33 ` Nishanth Menon
0 siblings, 1 reply; 6+ messages in thread
From: Sekhar Nori @ 2020-11-13 17:15 UTC (permalink / raw)
To: Nishanth Menon
Cc: Catalin Marinas, Will Deacon, linux-arm-kernel, linux-kernel, Faiz Abbas
On 13/11/20 10:34 PM, Nishanth Menon wrote:
> On 21:19-20201113, Sekhar Nori wrote:
>> From: Faiz Abbas <faiz_abbas@ti.com>
>>
>> Add configs to help enable regulators that supply power to the SD card
>> on TI's J721e platform. These regulators are controlled by either
>> SoC gpios or gpios over i2c expander.
>>
>> vmlinux size before and after patch follow:
>>
> Sekhar,
>
>> Before:
>> text data bss dec hex filename
>> 19755448 10376346 535572 30667366 1d3f266 vmlinux
>>
>> After:
>> text data bss dec hex filename
>> 19769232 10381390 536212 30686834 1d43e72 vmlinux
>>
>> difference is 19,468 (dec)
>>
>> Acked-by: Tero Kristo <t-kristo@ti.com>
>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
>> ---
>> changes in v3:
>> - add size delta as requested by Nishanth Menon
>
> https://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git/commit/?h=ti-k3-config-next&id=6b133f475a97a0839f02e3c0b937886b9adc2933
>
> https://lore.kernel.org/linux-arm-kernel/20201103190821.30937-1-faiz_abbas@ti.com/
>
>
> Is this a duplicate patch?
Looks like, please discard. For some reason, Faiz's v3 did not show-up
in my inbox and v2 applied cleanly to linux-next/master. So I assume it
was not refreshed.
Thanks,
Sekhar
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
2020-11-13 17:15 ` Sekhar Nori
@ 2020-11-13 18:33 ` Nishanth Menon
0 siblings, 0 replies; 6+ messages in thread
From: Nishanth Menon @ 2020-11-13 18:33 UTC (permalink / raw)
To: Sekhar Nori
Cc: Catalin Marinas, Will Deacon, linux-arm-kernel, linux-kernel, Faiz Abbas
On 22:45-20201113, Sekhar Nori wrote:
> On 13/11/20 10:34 PM, Nishanth Menon wrote:
> > On 21:19-20201113, Sekhar Nori wrote:
> >> From: Faiz Abbas <faiz_abbas@ti.com>
> >>
> >> Add configs to help enable regulators that supply power to the SD card
> >> on TI's J721e platform. These regulators are controlled by either
> >> SoC gpios or gpios over i2c expander.
> >>
> >> vmlinux size before and after patch follow:
> >>
> > Sekhar,
> >
> >> Before:
> >> text data bss dec hex filename
> >> 19755448 10376346 535572 30667366 1d3f266 vmlinux
> >>
> >> After:
> >> text data bss dec hex filename
> >> 19769232 10381390 536212 30686834 1d43e72 vmlinux
> >>
> >> difference is 19,468 (dec)
> >>
> >> Acked-by: Tero Kristo <t-kristo@ti.com>
> >> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> >> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> >> ---
> >> changes in v3:
> >> - add size delta as requested by Nishanth Menon
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git/commit/?h=ti-k3-config-next&id=6b133f475a97a0839f02e3c0b937886b9adc2933
> >
> > https://lore.kernel.org/linux-arm-kernel/20201103190821.30937-1-faiz_abbas@ti.com/
> >
> >
> > Is this a duplicate patch?
>
> Looks like, please discard. For some reason, Faiz's v3 did not show-up
> in my inbox and v2 applied cleanly to linux-next/master. So I assume it
> was not refreshed.
OK. Thanks for confirming - keeping Faiz's version in the tree. :)
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-11-13 18:33 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-03 19:08 [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Faiz Abbas
2020-11-12 17:51 ` Nishanth Menon
2020-11-13 15:49 Sekhar Nori
2020-11-13 17:04 ` Nishanth Menon
2020-11-13 17:15 ` Sekhar Nori
2020-11-13 18:33 ` Nishanth Menon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).