* Re: [PATCH v3 2/2] thermal: Move therm_throt there from x86/mce
2021-02-02 12:10 ` Borislav Petkov
@ 2021-02-02 18:13 ` Srinivas Pandruvada
2021-02-08 11:37 ` [tip: ras/core] " tip-bot2 for Borislav Petkov
1 sibling, 0 replies; 10+ messages in thread
From: Srinivas Pandruvada @ 2021-02-02 18:13 UTC (permalink / raw)
To: Borislav Petkov
Cc: X86 ML, LKML, Peter Zijlstra, Amit Kucheria, Daniel Lezcano,
Tony Luck, Zhang Rui, linux-pm
On Tue, 2021-02-02 at 13:10 +0100, Borislav Petkov wrote:
> On Mon, Feb 01, 2021 at 11:10:29AM -0800, Srinivas Pandruvada wrote:
> > Only user of the above interface is in drivers/thermal/intel.
> > So why can't we move these to
> > drivers/thermal/intel/thermal_interrupt.h
> > or similar?
>
> Sure, see below.
>
Thanks.
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> ---
> From: Borislav Petkov <bp@suse.de>
> Date: Thu, 7 Jan 2021 13:29:05 +0100
> Subject: [PATCH] thermal: Move therm_throt there from x86/mce
>
> This functionality has nothing to do with MCE, move it to the thermal
> framework and untangle it from MCE.
>
> Requested-by: Peter Zijlstra <peterz@infradead.org>
> Signed-off-by: Borislav Petkov <bp@suse.de>
> ---
> arch/x86/Kconfig | 4 ---
> arch/x86/include/asm/mce.h | 16 ----------
> arch/x86/include/asm/thermal.h | 13 ++++++++
> arch/x86/kernel/cpu/intel.c | 3 ++
> arch/x86/kernel/cpu/mce/Makefile | 2 --
> arch/x86/kernel/cpu/mce/intel.c | 1 -
> arch/x86/kernel/irq.c | 21 ++++++++++++
> drivers/thermal/intel/Kconfig | 4 +++
> drivers/thermal/intel/Makefile | 1 +
> .../thermal/intel}/therm_throt.c | 32 ++++++-----------
> --
> drivers/thermal/intel/thermal_interrupt.h | 15 +++++++++
> drivers/thermal/intel/x86_pkg_temp_thermal.c | 4 ++-
> 12 files changed, 69 insertions(+), 47 deletions(-)
> create mode 100644 arch/x86/include/asm/thermal.h
> rename {arch/x86/kernel/cpu/mce =>
> drivers/thermal/intel}/therm_throt.c (97%)
> create mode 100644 drivers/thermal/intel/thermal_interrupt.h
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 21f851179ff0..9989db3a9bf5 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -1158,10 +1158,6 @@ config X86_MCE_INJECT
> If you don't know what a machine check is and you don't do
> kernel
> QA it is safe to say n.
>
> -config X86_THERMAL_VECTOR
> - def_bool y
> - depends on X86_MCE_INTEL
> -
> source "arch/x86/events/Kconfig"
>
> config X86_LEGACY_VM86
> diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
> index def9aa5e1fa4..ddfb3cad8dff 100644
> --- a/arch/x86/include/asm/mce.h
> +++ b/arch/x86/include/asm/mce.h
> @@ -288,22 +288,6 @@ extern void (*mce_threshold_vector)(void);
> /* Deferred error interrupt handler */
> extern void (*deferred_error_int_vector)(void);
>
> -/*
> - * Thermal handler
> - */
> -
> -void intel_init_thermal(struct cpuinfo_x86 *c);
> -
> -/* Interrupt Handler for core thermal thresholds */
> -extern int (*platform_thermal_notify)(__u64 msr_val);
> -
> -/* Interrupt Handler for package thermal thresholds */
> -extern int (*platform_thermal_package_notify)(__u64 msr_val);
> -
> -/* Callback support of rate control, return true, if
> - * callback has rate control */
> -extern bool (*platform_thermal_package_rate_control)(void);
> -
> /*
> * Used by APEI to report memory error via /dev/mcelog
> */
> diff --git a/arch/x86/include/asm/thermal.h
> b/arch/x86/include/asm/thermal.h
> new file mode 100644
> index 000000000000..ddbdefd5b94f
> --- /dev/null
> +++ b/arch/x86/include/asm/thermal.h
> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _ASM_X86_THERMAL_H
> +#define _ASM_X86_THERMAL_H
> +
> +#ifdef CONFIG_X86_THERMAL_VECTOR
> +void intel_init_thermal(struct cpuinfo_x86 *c);
> +bool x86_thermal_enabled(void);
> +void intel_thermal_interrupt(void);
> +#else
> +static inline void intel_init_thermal(struct cpuinfo_x86 *c) { }
> +#endif
> +
> +#endif /* _ASM_X86_THERMAL_H */
> diff --git a/arch/x86/kernel/cpu/intel.c
> b/arch/x86/kernel/cpu/intel.c
> index 59a1e3ce3f14..71221af87cb1 100644
> --- a/arch/x86/kernel/cpu/intel.c
> +++ b/arch/x86/kernel/cpu/intel.c
> @@ -24,6 +24,7 @@
> #include <asm/traps.h>
> #include <asm/resctrl.h>
> #include <asm/numa.h>
> +#include <asm/thermal.h>
>
> #ifdef CONFIG_X86_64
> #include <linux/topology.h>
> @@ -719,6 +720,8 @@ static void init_intel(struct cpuinfo_x86 *c)
> tsx_disable();
>
> split_lock_init();
> +
> + intel_init_thermal(c);
> }
>
> #ifdef CONFIG_X86_32
> diff --git a/arch/x86/kernel/cpu/mce/Makefile
> b/arch/x86/kernel/cpu/mce/Makefile
> index 9f020c994154..015856abdbb1 100644
> --- a/arch/x86/kernel/cpu/mce/Makefile
> +++ b/arch/x86/kernel/cpu/mce/Makefile
> @@ -9,8 +9,6 @@ obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
> mce-inject-y := inject.o
> obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o
>
> -obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
> -
> obj-$(CONFIG_ACPI_APEI) += apei.o
>
> obj-$(CONFIG_X86_MCELOG_LEGACY) += dev-mcelog.o
> diff --git a/arch/x86/kernel/cpu/mce/intel.c
> b/arch/x86/kernel/cpu/mce/intel.c
> index c2476fe0682e..e309476743b7 100644
> --- a/arch/x86/kernel/cpu/mce/intel.c
> +++ b/arch/x86/kernel/cpu/mce/intel.c
> @@ -531,7 +531,6 @@ static void intel_imc_init(struct cpuinfo_x86 *c)
>
> void mce_intel_feature_init(struct cpuinfo_x86 *c)
> {
> - intel_init_thermal(c);
> intel_init_cmci();
> intel_init_lmce();
> intel_ppin_init(c);
> diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
> index c5dd50369e2f..d4ad344e80bf 100644
> --- a/arch/x86/kernel/irq.c
> +++ b/arch/x86/kernel/irq.c
> @@ -21,6 +21,7 @@
> #include <asm/hw_irq.h>
> #include <asm/desc.h>
> #include <asm/traps.h>
> +#include <asm/thermal.h>
>
> #define CREATE_TRACE_POINTS
> #include <asm/trace/irq_vectors.h>
> @@ -374,3 +375,23 @@ void fixup_irqs(void)
> }
> }
> #endif
> +
> +#ifdef CONFIG_X86_THERMAL_VECTOR
> +static void smp_thermal_vector(void)
> +{
> + if (x86_thermal_enabled())
> + intel_thermal_interrupt();
> + else
> + pr_err("CPU%d: Unexpected LVT thermal interrupt!\n",
> + smp_processor_id());
> +}
> +
> +DEFINE_IDTENTRY_SYSVEC(sysvec_thermal)
> +{
> + trace_thermal_apic_entry(THERMAL_APIC_VECTOR);
> + inc_irq_stat(irq_thermal_count);
> + smp_thermal_vector();
> + trace_thermal_apic_exit(THERMAL_APIC_VECTOR);
> + ack_APIC_irq();
> +}
> +#endif
> diff --git a/drivers/thermal/intel/Kconfig
> b/drivers/thermal/intel/Kconfig
> index 8025b21f43fa..ce4f59213c7a 100644
> --- a/drivers/thermal/intel/Kconfig
> +++ b/drivers/thermal/intel/Kconfig
> @@ -8,6 +8,10 @@ config INTEL_POWERCLAMP
> enforce idle time which results in more package C-state
> residency. The
> user interface is exposed via generic thermal framework.
>
> +config X86_THERMAL_VECTOR
> + def_bool y
> + depends on X86 && CPU_SUP_INTEL && X86_LOCAL_APIC
> +
> config X86_PKG_TEMP_THERMAL
> tristate "X86 package temperature thermal driver"
> depends on X86_THERMAL_VECTOR
> diff --git a/drivers/thermal/intel/Makefile
> b/drivers/thermal/intel/Makefile
> index 0d9736ced5d4..ff2ad30ef397 100644
> --- a/drivers/thermal/intel/Makefile
> +++ b/drivers/thermal/intel/Makefile
> @@ -10,3 +10,4 @@ obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) +=
> intel_quark_dts_thermal.o
> obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
> obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
> obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
> +obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
> diff --git a/arch/x86/kernel/cpu/mce/therm_throt.c
> b/drivers/thermal/intel/therm_throt.c
> similarity index 97%
> rename from arch/x86/kernel/cpu/mce/therm_throt.c
> rename to drivers/thermal/intel/therm_throt.c
> index 5b15d7cef1d1..f8e882592ba5 100644
> --- a/arch/x86/kernel/cpu/mce/therm_throt.c
> +++ b/drivers/thermal/intel/therm_throt.c
> @@ -26,13 +26,13 @@
> #include <linux/cpu.h>
>
> #include <asm/processor.h>
> +#include <asm/thermal.h>
> #include <asm/traps.h>
> #include <asm/apic.h>
> -#include <asm/mce.h>
> +#include <asm/irq.h>
> #include <asm/msr.h>
> -#include <asm/trace/irq_vectors.h>
>
> -#include "internal.h"
> +#include "thermal_interrupt.h"
>
> /* How long to wait between reporting thermal events */
> #define CHECK_INTERVAL (300 * HZ)
> @@ -570,7 +570,7 @@ static void notify_thresholds(__u64 msr_val)
> }
>
> /* Thermal transition interrupt handler */
> -static void intel_thermal_interrupt(void)
> +void intel_thermal_interrupt(void)
> {
> __u64 msr_val;
>
> @@ -606,23 +606,6 @@ static void intel_thermal_interrupt(void)
> }
> }
>
> -static void unexpected_thermal_interrupt(void)
> -{
> - pr_err("CPU%d: Unexpected LVT thermal interrupt!\n",
> - smp_processor_id());
> -}
> -
> -static void (*smp_thermal_vector)(void) =
> unexpected_thermal_interrupt;
> -
> -DEFINE_IDTENTRY_SYSVEC(sysvec_thermal)
> -{
> - trace_thermal_apic_entry(THERMAL_APIC_VECTOR);
> - inc_irq_stat(irq_thermal_count);
> - smp_thermal_vector();
> - trace_thermal_apic_exit(THERMAL_APIC_VECTOR);
> - ack_APIC_irq();
> -}
> -
> /* Thermal monitoring depends on APIC, ACPI and clock modulation */
> static int intel_thermal_supported(struct cpuinfo_x86 *c)
> {
> @@ -633,6 +616,11 @@ static int intel_thermal_supported(struct
> cpuinfo_x86 *c)
> return 1;
> }
>
> +bool x86_thermal_enabled(void)
> +{
> + return atomic_read(&therm_throt_en);
> +}
> +
> void intel_init_thermal(struct cpuinfo_x86 *c)
> {
> unsigned int cpu = smp_processor_id();
> @@ -719,8 +707,6 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
> | PACKAGE_THERM_INT_HIGH_ENABLE), h);
> }
>
> - smp_thermal_vector = intel_thermal_interrupt;
> -
> rdmsr(MSR_IA32_MISC_ENABLE, l, h);
> wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
>
> diff --git a/drivers/thermal/intel/thermal_interrupt.h
> b/drivers/thermal/intel/thermal_interrupt.h
> new file mode 100644
> index 000000000000..53f427bb58dc
> --- /dev/null
> +++ b/drivers/thermal/intel/thermal_interrupt.h
> @@ -0,0 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _INTEL_THERMAL_INTERRUPT_H
> +#define _INTEL_THERMAL_INTERRUPT_H
> +
> +/* Interrupt Handler for package thermal thresholds */
> +extern int (*platform_thermal_package_notify)(__u64 msr_val);
> +
> +/* Interrupt Handler for core thermal thresholds */
> +extern int (*platform_thermal_notify)(__u64 msr_val);
> +
> +/* Callback support of rate control, return true, if
> + * callback has rate control */
> +extern bool (*platform_thermal_package_rate_control)(void);
> +
> +#endif /* _INTEL_THERMAL_INTERRUPT_H */
> diff --git a/drivers/thermal/intel/x86_pkg_temp_thermal.c
> b/drivers/thermal/intel/x86_pkg_temp_thermal.c
> index b81c33202f41..295742e83960 100644
> --- a/drivers/thermal/intel/x86_pkg_temp_thermal.c
> +++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c
> @@ -17,8 +17,10 @@
> #include <linux/pm.h>
> #include <linux/thermal.h>
> #include <linux/debugfs.h>
> +
> #include <asm/cpu_device_id.h>
> -#include <asm/mce.h>
> +
> +#include "thermal_interrupt.h"
>
> /*
> * Rate control delay: Idea is to introduce denounce effect
> --
> 2.29.2
>
^ permalink raw reply [flat|nested] 10+ messages in thread* [tip: ras/core] thermal: Move therm_throt there from x86/mce
2021-02-02 12:10 ` Borislav Petkov
2021-02-02 18:13 ` Srinivas Pandruvada
@ 2021-02-08 11:37 ` tip-bot2 for Borislav Petkov
1 sibling, 0 replies; 10+ messages in thread
From: tip-bot2 for Borislav Petkov @ 2021-02-08 11:37 UTC (permalink / raw)
To: linux-tip-commits; +Cc: Borislav Petkov, Srinivas Pandruvada, x86, linux-kernel
The following commit has been merged into the ras/core branch of tip:
Commit-ID: 9223d0dccb8f8523754122f68316dd1a4f39f7f8
Gitweb: https://git.kernel.org/tip/9223d0dccb8f8523754122f68316dd1a4f39f7f8
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Thu, 07 Jan 2021 13:29:05 +01:00
Committer: Borislav Petkov <bp@suse.de>
CommitterDate: Mon, 08 Feb 2021 11:43:20 +01:00
thermal: Move therm_throt there from x86/mce
This functionality has nothing to do with MCE, move it to the thermal
framework and untangle it from MCE.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lkml.kernel.org/r/20210202121003.GD18075@zn.tnic
---
arch/x86/Kconfig | 4 +-
arch/x86/include/asm/mce.h | 16 +-
arch/x86/include/asm/thermal.h | 13 +-
arch/x86/kernel/cpu/intel.c | 3 +-
arch/x86/kernel/cpu/mce/Makefile | 2 +-
arch/x86/kernel/cpu/mce/intel.c | 1 +-
arch/x86/kernel/cpu/mce/therm_throt.c | 732 +------------------
arch/x86/kernel/irq.c | 21 +-
drivers/thermal/intel/Kconfig | 4 +-
drivers/thermal/intel/Makefile | 1 +-
drivers/thermal/intel/therm_throt.c | 718 ++++++++++++++++++-
drivers/thermal/intel/thermal_interrupt.h | 15 +-
drivers/thermal/intel/x86_pkg_temp_thermal.c | 4 +-
13 files changed, 778 insertions(+), 756 deletions(-)
create mode 100644 arch/x86/include/asm/thermal.h
delete mode 100644 arch/x86/kernel/cpu/mce/therm_throt.c
create mode 100644 drivers/thermal/intel/therm_throt.c
create mode 100644 drivers/thermal/intel/thermal_interrupt.h
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7b6dd10..54df315 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1157,10 +1157,6 @@ config X86_MCE_INJECT
If you don't know what a machine check is and you don't do kernel
QA it is safe to say n.
-config X86_THERMAL_VECTOR
- def_bool y
- depends on X86_MCE_INTEL
-
source "arch/x86/events/Kconfig"
config X86_LEGACY_VM86
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index def9aa5..ddfb3ca 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -289,22 +289,6 @@ extern void (*mce_threshold_vector)(void);
extern void (*deferred_error_int_vector)(void);
/*
- * Thermal handler
- */
-
-void intel_init_thermal(struct cpuinfo_x86 *c);
-
-/* Interrupt Handler for core thermal thresholds */
-extern int (*platform_thermal_notify)(__u64 msr_val);
-
-/* Interrupt Handler for package thermal thresholds */
-extern int (*platform_thermal_package_notify)(__u64 msr_val);
-
-/* Callback support of rate control, return true, if
- * callback has rate control */
-extern bool (*platform_thermal_package_rate_control)(void);
-
-/*
* Used by APEI to report memory error via /dev/mcelog
*/
diff --git a/arch/x86/include/asm/thermal.h b/arch/x86/include/asm/thermal.h
new file mode 100644
index 0000000..ddbdefd
--- /dev/null
+++ b/arch/x86/include/asm/thermal.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_THERMAL_H
+#define _ASM_X86_THERMAL_H
+
+#ifdef CONFIG_X86_THERMAL_VECTOR
+void intel_init_thermal(struct cpuinfo_x86 *c);
+bool x86_thermal_enabled(void);
+void intel_thermal_interrupt(void);
+#else
+static inline void intel_init_thermal(struct cpuinfo_x86 *c) { }
+#endif
+
+#endif /* _ASM_X86_THERMAL_H */
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 59a1e3c..71221af 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -24,6 +24,7 @@
#include <asm/traps.h>
#include <asm/resctrl.h>
#include <asm/numa.h>
+#include <asm/thermal.h>
#ifdef CONFIG_X86_64
#include <linux/topology.h>
@@ -719,6 +720,8 @@ static void init_intel(struct cpuinfo_x86 *c)
tsx_disable();
split_lock_init();
+
+ intel_init_thermal(c);
}
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/cpu/mce/Makefile b/arch/x86/kernel/cpu/mce/Makefile
index 9f020c9..015856a 100644
--- a/arch/x86/kernel/cpu/mce/Makefile
+++ b/arch/x86/kernel/cpu/mce/Makefile
@@ -9,8 +9,6 @@ obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
mce-inject-y := inject.o
obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o
-obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
-
obj-$(CONFIG_ACPI_APEI) += apei.o
obj-$(CONFIG_X86_MCELOG_LEGACY) += dev-mcelog.o
diff --git a/arch/x86/kernel/cpu/mce/intel.c b/arch/x86/kernel/cpu/mce/intel.c
index c2476fe..e309476 100644
--- a/arch/x86/kernel/cpu/mce/intel.c
+++ b/arch/x86/kernel/cpu/mce/intel.c
@@ -531,7 +531,6 @@ static void intel_imc_init(struct cpuinfo_x86 *c)
void mce_intel_feature_init(struct cpuinfo_x86 *c)
{
- intel_init_thermal(c);
intel_init_cmci();
intel_init_lmce();
intel_ppin_init(c);
diff --git a/arch/x86/kernel/cpu/mce/therm_throt.c b/arch/x86/kernel/cpu/mce/therm_throt.c
deleted file mode 100644
index 5b15d7c..0000000
--- a/arch/x86/kernel/cpu/mce/therm_throt.c
+++ /dev/null
@@ -1,732 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thermal throttle event support code (such as syslog messaging and rate
- * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
- *
- * This allows consistent reporting of CPU thermal throttle events.
- *
- * Maintains a counter in /sys that keeps track of the number of thermal
- * events, such that the user knows how bad the thermal problem might be
- * (since the logging to syslog is rate limited).
- *
- * Author: Dmitriy Zavin (dmitriyz@google.com)
- *
- * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
- * Inspired by Ross Biro's and Al Borchers' counter code.
- */
-#include <linux/interrupt.h>
-#include <linux/notifier.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/percpu.h>
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/cpu.h>
-
-#include <asm/processor.h>
-#include <asm/traps.h>
-#include <asm/apic.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-#include <asm/trace/irq_vectors.h>
-
-#include "internal.h"
-
-/* How long to wait between reporting thermal events */
-#define CHECK_INTERVAL (300 * HZ)
-
-#define THERMAL_THROTTLING_EVENT 0
-#define POWER_LIMIT_EVENT 1
-
-/**
- * struct _thermal_state - Represent the current thermal event state
- * @next_check: Stores the next timestamp, when it is allowed
- * to log the next warning message.
- * @last_interrupt_time: Stores the timestamp for the last threshold
- * high event.
- * @therm_work: Delayed workqueue structure
- * @count: Stores the current running count for thermal
- * or power threshold interrupts.
- * @last_count: Stores the previous running count for thermal
- * or power threshold interrupts.
- * @max_time_ms: This shows the maximum amount of time CPU was
- * in throttled state for a single thermal
- * threshold high to low state.
- * @total_time_ms: This is a cumulative time during which CPU was
- * in the throttled state.
- * @rate_control_active: Set when a throttling message is logged.
- * This is used for the purpose of rate-control.
- * @new_event: Stores the last high/low status of the
- * THERM_STATUS_PROCHOT or
- * THERM_STATUS_POWER_LIMIT.
- * @level: Stores whether this _thermal_state instance is
- * for a CORE level or for PACKAGE level.
- * @sample_index: Index for storing the next sample in the buffer
- * temp_samples[].
- * @sample_count: Total number of samples collected in the buffer
- * temp_samples[].
- * @average: The last moving average of temperature samples
- * @baseline_temp: Temperature at which thermal threshold high
- * interrupt was generated.
- * @temp_samples: Storage for temperature samples to calculate
- * moving average.
- *
- * This structure is used to represent data related to thermal state for a CPU.
- * There is a separate storage for core and package level for each CPU.
- */
-struct _thermal_state {
- u64 next_check;
- u64 last_interrupt_time;
- struct delayed_work therm_work;
- unsigned long count;
- unsigned long last_count;
- unsigned long max_time_ms;
- unsigned long total_time_ms;
- bool rate_control_active;
- bool new_event;
- u8 level;
- u8 sample_index;
- u8 sample_count;
- u8 average;
- u8 baseline_temp;
- u8 temp_samples[3];
-};
-
-struct thermal_state {
- struct _thermal_state core_throttle;
- struct _thermal_state core_power_limit;
- struct _thermal_state package_throttle;
- struct _thermal_state package_power_limit;
- struct _thermal_state core_thresh0;
- struct _thermal_state core_thresh1;
- struct _thermal_state pkg_thresh0;
- struct _thermal_state pkg_thresh1;
-};
-
-/* Callback to handle core threshold interrupts */
-int (*platform_thermal_notify)(__u64 msr_val);
-EXPORT_SYMBOL(platform_thermal_notify);
-
-/* Callback to handle core package threshold_interrupts */
-int (*platform_thermal_package_notify)(__u64 msr_val);
-EXPORT_SYMBOL_GPL(platform_thermal_package_notify);
-
-/* Callback support of rate control, return true, if
- * callback has rate control */
-bool (*platform_thermal_package_rate_control)(void);
-EXPORT_SYMBOL_GPL(platform_thermal_package_rate_control);
-
-
-static DEFINE_PER_CPU(struct thermal_state, thermal_state);
-
-static atomic_t therm_throt_en = ATOMIC_INIT(0);
-
-static u32 lvtthmr_init __read_mostly;
-
-#ifdef CONFIG_SYSFS
-#define define_therm_throt_device_one_ro(_name) \
- static DEVICE_ATTR(_name, 0444, \
- therm_throt_device_show_##_name, \
- NULL) \
-
-#define define_therm_throt_device_show_func(event, name) \
- \
-static ssize_t therm_throt_device_show_##event##_##name( \
- struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- unsigned int cpu = dev->id; \
- ssize_t ret; \
- \
- preempt_disable(); /* CPU hotplug */ \
- if (cpu_online(cpu)) { \
- ret = sprintf(buf, "%lu\n", \
- per_cpu(thermal_state, cpu).event.name); \
- } else \
- ret = 0; \
- preempt_enable(); \
- \
- return ret; \
-}
-
-define_therm_throt_device_show_func(core_throttle, count);
-define_therm_throt_device_one_ro(core_throttle_count);
-
-define_therm_throt_device_show_func(core_power_limit, count);
-define_therm_throt_device_one_ro(core_power_limit_count);
-
-define_therm_throt_device_show_func(package_throttle, count);
-define_therm_throt_device_one_ro(package_throttle_count);
-
-define_therm_throt_device_show_func(package_power_limit, count);
-define_therm_throt_device_one_ro(package_power_limit_count);
-
-define_therm_throt_device_show_func(core_throttle, max_time_ms);
-define_therm_throt_device_one_ro(core_throttle_max_time_ms);
-
-define_therm_throt_device_show_func(package_throttle, max_time_ms);
-define_therm_throt_device_one_ro(package_throttle_max_time_ms);
-
-define_therm_throt_device_show_func(core_throttle, total_time_ms);
-define_therm_throt_device_one_ro(core_throttle_total_time_ms);
-
-define_therm_throt_device_show_func(package_throttle, total_time_ms);
-define_therm_throt_device_one_ro(package_throttle_total_time_ms);
-
-static struct attribute *thermal_throttle_attrs[] = {
- &dev_attr_core_throttle_count.attr,
- &dev_attr_core_throttle_max_time_ms.attr,
- &dev_attr_core_throttle_total_time_ms.attr,
- NULL
-};
-
-static const struct attribute_group thermal_attr_group = {
- .attrs = thermal_throttle_attrs,
- .name = "thermal_throttle"
-};
-#endif /* CONFIG_SYSFS */
-
-#define CORE_LEVEL 0
-#define PACKAGE_LEVEL 1
-
-#define THERM_THROT_POLL_INTERVAL HZ
-#define THERM_STATUS_PROCHOT_LOG BIT(1)
-
-#define THERM_STATUS_CLEAR_CORE_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11) | BIT(13) | BIT(15))
-#define THERM_STATUS_CLEAR_PKG_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11))
-
-static void clear_therm_status_log(int level)
-{
- int msr;
- u64 mask, msr_val;
-
- if (level == CORE_LEVEL) {
- msr = MSR_IA32_THERM_STATUS;
- mask = THERM_STATUS_CLEAR_CORE_MASK;
- } else {
- msr = MSR_IA32_PACKAGE_THERM_STATUS;
- mask = THERM_STATUS_CLEAR_PKG_MASK;
- }
-
- rdmsrl(msr, msr_val);
- msr_val &= mask;
- wrmsrl(msr, msr_val & ~THERM_STATUS_PROCHOT_LOG);
-}
-
-static void get_therm_status(int level, bool *proc_hot, u8 *temp)
-{
- int msr;
- u64 msr_val;
-
- if (level == CORE_LEVEL)
- msr = MSR_IA32_THERM_STATUS;
- else
- msr = MSR_IA32_PACKAGE_THERM_STATUS;
-
- rdmsrl(msr, msr_val);
- if (msr_val & THERM_STATUS_PROCHOT_LOG)
- *proc_hot = true;
- else
- *proc_hot = false;
-
- *temp = (msr_val >> 16) & 0x7F;
-}
-
-static void __maybe_unused throttle_active_work(struct work_struct *work)
-{
- struct _thermal_state *state = container_of(to_delayed_work(work),
- struct _thermal_state, therm_work);
- unsigned int i, avg, this_cpu = smp_processor_id();
- u64 now = get_jiffies_64();
- bool hot;
- u8 temp;
-
- get_therm_status(state->level, &hot, &temp);
- /* temperature value is offset from the max so lesser means hotter */
- if (!hot && temp > state->baseline_temp) {
- if (state->rate_control_active)
- pr_info("CPU%d: %s temperature/speed normal (total events = %lu)\n",
- this_cpu,
- state->level == CORE_LEVEL ? "Core" : "Package",
- state->count);
-
- state->rate_control_active = false;
- return;
- }
-
- if (time_before64(now, state->next_check) &&
- state->rate_control_active)
- goto re_arm;
-
- state->next_check = now + CHECK_INTERVAL;
-
- if (state->count != state->last_count) {
- /* There was one new thermal interrupt */
- state->last_count = state->count;
- state->average = 0;
- state->sample_count = 0;
- state->sample_index = 0;
- }
-
- state->temp_samples[state->sample_index] = temp;
- state->sample_count++;
- state->sample_index = (state->sample_index + 1) % ARRAY_SIZE(state->temp_samples);
- if (state->sample_count < ARRAY_SIZE(state->temp_samples))
- goto re_arm;
-
- avg = 0;
- for (i = 0; i < ARRAY_SIZE(state->temp_samples); ++i)
- avg += state->temp_samples[i];
-
- avg /= ARRAY_SIZE(state->temp_samples);
-
- if (state->average > avg) {
- pr_warn("CPU%d: %s temperature is above threshold, cpu clock is throttled (total events = %lu)\n",
- this_cpu,
- state->level == CORE_LEVEL ? "Core" : "Package",
- state->count);
- state->rate_control_active = true;
- }
-
- state->average = avg;
-
-re_arm:
- clear_therm_status_log(state->level);
- schedule_delayed_work_on(this_cpu, &state->therm_work, THERM_THROT_POLL_INTERVAL);
-}
-
-/***
- * therm_throt_process - Process thermal throttling event from interrupt
- * @curr: Whether the condition is current or not (boolean), since the
- * thermal interrupt normally gets called both when the thermal
- * event begins and once the event has ended.
- *
- * This function is called by the thermal interrupt after the
- * IRQ has been acknowledged.
- *
- * It will take care of rate limiting and printing messages to the syslog.
- */
-static void therm_throt_process(bool new_event, int event, int level)
-{
- struct _thermal_state *state;
- unsigned int this_cpu = smp_processor_id();
- bool old_event;
- u64 now;
- struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
-
- now = get_jiffies_64();
- if (level == CORE_LEVEL) {
- if (event == THERMAL_THROTTLING_EVENT)
- state = &pstate->core_throttle;
- else if (event == POWER_LIMIT_EVENT)
- state = &pstate->core_power_limit;
- else
- return;
- } else if (level == PACKAGE_LEVEL) {
- if (event == THERMAL_THROTTLING_EVENT)
- state = &pstate->package_throttle;
- else if (event == POWER_LIMIT_EVENT)
- state = &pstate->package_power_limit;
- else
- return;
- } else
- return;
-
- old_event = state->new_event;
- state->new_event = new_event;
-
- if (new_event)
- state->count++;
-
- if (event != THERMAL_THROTTLING_EVENT)
- return;
-
- if (new_event && !state->last_interrupt_time) {
- bool hot;
- u8 temp;
-
- get_therm_status(state->level, &hot, &temp);
- /*
- * Ignore short temperature spike as the system is not close
- * to PROCHOT. 10C offset is large enough to ignore. It is
- * already dropped from the high threshold temperature.
- */
- if (temp > 10)
- return;
-
- state->baseline_temp = temp;
- state->last_interrupt_time = now;
- schedule_delayed_work_on(this_cpu, &state->therm_work, THERM_THROT_POLL_INTERVAL);
- } else if (old_event && state->last_interrupt_time) {
- unsigned long throttle_time;
-
- throttle_time = jiffies_delta_to_msecs(now - state->last_interrupt_time);
- if (throttle_time > state->max_time_ms)
- state->max_time_ms = throttle_time;
- state->total_time_ms += throttle_time;
- state->last_interrupt_time = 0;
- }
-}
-
-static int thresh_event_valid(int level, int event)
-{
- struct _thermal_state *state;
- unsigned int this_cpu = smp_processor_id();
- struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
- u64 now = get_jiffies_64();
-
- if (level == PACKAGE_LEVEL)
- state = (event == 0) ? &pstate->pkg_thresh0 :
- &pstate->pkg_thresh1;
- else
- state = (event == 0) ? &pstate->core_thresh0 :
- &pstate->core_thresh1;
-
- if (time_before64(now, state->next_check))
- return 0;
-
- state->next_check = now + CHECK_INTERVAL;
-
- return 1;
-}
-
-static bool int_pln_enable;
-static int __init int_pln_enable_setup(char *s)
-{
- int_pln_enable = true;
-
- return 1;
-}
-__setup("int_pln_enable", int_pln_enable_setup);
-
-#ifdef CONFIG_SYSFS
-/* Add/Remove thermal_throttle interface for CPU device: */
-static int thermal_throttle_add_dev(struct device *dev, unsigned int cpu)
-{
- int err;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- err = sysfs_create_group(&dev->kobj, &thermal_attr_group);
- if (err)
- return err;
-
- if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) {
- err = sysfs_add_file_to_group(&dev->kobj,
- &dev_attr_core_power_limit_count.attr,
- thermal_attr_group.name);
- if (err)
- goto del_group;
- }
-
- if (cpu_has(c, X86_FEATURE_PTS)) {
- err = sysfs_add_file_to_group(&dev->kobj,
- &dev_attr_package_throttle_count.attr,
- thermal_attr_group.name);
- if (err)
- goto del_group;
-
- err = sysfs_add_file_to_group(&dev->kobj,
- &dev_attr_package_throttle_max_time_ms.attr,
- thermal_attr_group.name);
- if (err)
- goto del_group;
-
- err = sysfs_add_file_to_group(&dev->kobj,
- &dev_attr_package_throttle_total_time_ms.attr,
- thermal_attr_group.name);
- if (err)
- goto del_group;
-
- if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) {
- err = sysfs_add_file_to_group(&dev->kobj,
- &dev_attr_package_power_limit_count.attr,
- thermal_attr_group.name);
- if (err)
- goto del_group;
- }
- }
-
- return 0;
-
-del_group:
- sysfs_remove_group(&dev->kobj, &thermal_attr_group);
-
- return err;
-}
-
-static void thermal_throttle_remove_dev(struct device *dev)
-{
- sysfs_remove_group(&dev->kobj, &thermal_attr_group);
-}
-
-/* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static int thermal_throttle_online(unsigned int cpu)
-{
- struct thermal_state *state = &per_cpu(thermal_state, cpu);
- struct device *dev = get_cpu_device(cpu);
- u32 l;
-
- state->package_throttle.level = PACKAGE_LEVEL;
- state->core_throttle.level = CORE_LEVEL;
-
- INIT_DELAYED_WORK(&state->package_throttle.therm_work, throttle_active_work);
- INIT_DELAYED_WORK(&state->core_throttle.therm_work, throttle_active_work);
-
- /* Unmask the thermal vector after the above workqueues are initialized. */
- l = apic_read(APIC_LVTTHMR);
- apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-
- return thermal_throttle_add_dev(dev, cpu);
-}
-
-static int thermal_throttle_offline(unsigned int cpu)
-{
- struct thermal_state *state = &per_cpu(thermal_state, cpu);
- struct device *dev = get_cpu_device(cpu);
- u32 l;
-
- /* Mask the thermal vector before draining evtl. pending work */
- l = apic_read(APIC_LVTTHMR);
- apic_write(APIC_LVTTHMR, l | APIC_LVT_MASKED);
-
- cancel_delayed_work_sync(&state->package_throttle.therm_work);
- cancel_delayed_work_sync(&state->core_throttle.therm_work);
-
- state->package_throttle.rate_control_active = false;
- state->core_throttle.rate_control_active = false;
-
- thermal_throttle_remove_dev(dev);
- return 0;
-}
-
-static __init int thermal_throttle_init_device(void)
-{
- int ret;
-
- if (!atomic_read(&therm_throt_en))
- return 0;
-
- ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/therm:online",
- thermal_throttle_online,
- thermal_throttle_offline);
- return ret < 0 ? ret : 0;
-}
-device_initcall(thermal_throttle_init_device);
-
-#endif /* CONFIG_SYSFS */
-
-static void notify_package_thresholds(__u64 msr_val)
-{
- bool notify_thres_0 = false;
- bool notify_thres_1 = false;
-
- if (!platform_thermal_package_notify)
- return;
-
- /* lower threshold check */
- if (msr_val & THERM_LOG_THRESHOLD0)
- notify_thres_0 = true;
- /* higher threshold check */
- if (msr_val & THERM_LOG_THRESHOLD1)
- notify_thres_1 = true;
-
- if (!notify_thres_0 && !notify_thres_1)
- return;
-
- if (platform_thermal_package_rate_control &&
- platform_thermal_package_rate_control()) {
- /* Rate control is implemented in callback */
- platform_thermal_package_notify(msr_val);
- return;
- }
-
- /* lower threshold reached */
- if (notify_thres_0 && thresh_event_valid(PACKAGE_LEVEL, 0))
- platform_thermal_package_notify(msr_val);
- /* higher threshold reached */
- if (notify_thres_1 && thresh_event_valid(PACKAGE_LEVEL, 1))
- platform_thermal_package_notify(msr_val);
-}
-
-static void notify_thresholds(__u64 msr_val)
-{
- /* check whether the interrupt handler is defined;
- * otherwise simply return
- */
- if (!platform_thermal_notify)
- return;
-
- /* lower threshold reached */
- if ((msr_val & THERM_LOG_THRESHOLD0) &&
- thresh_event_valid(CORE_LEVEL, 0))
- platform_thermal_notify(msr_val);
- /* higher threshold reached */
- if ((msr_val & THERM_LOG_THRESHOLD1) &&
- thresh_event_valid(CORE_LEVEL, 1))
- platform_thermal_notify(msr_val);
-}
-
-/* Thermal transition interrupt handler */
-static void intel_thermal_interrupt(void)
-{
- __u64 msr_val;
-
- if (static_cpu_has(X86_FEATURE_HWP))
- wrmsrl_safe(MSR_HWP_STATUS, 0);
-
- rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-
- /* Check for violation of core thermal thresholds*/
- notify_thresholds(msr_val);
-
- therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
- THERMAL_THROTTLING_EVENT,
- CORE_LEVEL);
-
- if (this_cpu_has(X86_FEATURE_PLN) && int_pln_enable)
- therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
- POWER_LIMIT_EVENT,
- CORE_LEVEL);
-
- if (this_cpu_has(X86_FEATURE_PTS)) {
- rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
- /* check violations of package thermal thresholds */
- notify_package_thresholds(msr_val);
- therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
- THERMAL_THROTTLING_EVENT,
- PACKAGE_LEVEL);
- if (this_cpu_has(X86_FEATURE_PLN) && int_pln_enable)
- therm_throt_process(msr_val &
- PACKAGE_THERM_STATUS_POWER_LIMIT,
- POWER_LIMIT_EVENT,
- PACKAGE_LEVEL);
- }
-}
-
-static void unexpected_thermal_interrupt(void)
-{
- pr_err("CPU%d: Unexpected LVT thermal interrupt!\n",
- smp_processor_id());
-}
-
-static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;
-
-DEFINE_IDTENTRY_SYSVEC(sysvec_thermal)
-{
- trace_thermal_apic_entry(THERMAL_APIC_VECTOR);
- inc_irq_stat(irq_thermal_count);
- smp_thermal_vector();
- trace_thermal_apic_exit(THERMAL_APIC_VECTOR);
- ack_APIC_irq();
-}
-
-/* Thermal monitoring depends on APIC, ACPI and clock modulation */
-static int intel_thermal_supported(struct cpuinfo_x86 *c)
-{
- if (!boot_cpu_has(X86_FEATURE_APIC))
- return 0;
- if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
- return 0;
- return 1;
-}
-
-void intel_init_thermal(struct cpuinfo_x86 *c)
-{
- unsigned int cpu = smp_processor_id();
- int tm2 = 0;
- u32 l, h;
-
- if (!intel_thermal_supported(c))
- return;
-
- /* On the BSP? */
- if (c == &boot_cpu_data)
- lvtthmr_init = apic_read(APIC_LVTTHMR);
-
- /*
- * First check if its enabled already, in which case there might
- * be some SMM goo which handles it, so we can't even put a handler
- * since it might be delivered via SMI already:
- */
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-
- h = lvtthmr_init;
- /*
- * The initial value of thermal LVT entries on all APs always reads
- * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
- * sequence to them and LVT registers are reset to 0s except for
- * the mask bits which are set to 1s when APs receive INIT IPI.
- * If BIOS takes over the thermal interrupt and sets its interrupt
- * delivery mode to SMI (not fixed), it restores the value that the
- * BIOS has programmed on AP based on BSP's info we saved since BIOS
- * is always setting the same value for all threads/cores.
- */
- if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED)
- apic_write(APIC_LVTTHMR, lvtthmr_init);
-
-
- if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
- if (system_state == SYSTEM_BOOTING)
- pr_debug("CPU%d: Thermal monitoring handled by SMI\n", cpu);
- return;
- }
-
- /* early Pentium M models use different method for enabling TM2 */
- if (cpu_has(c, X86_FEATURE_TM2)) {
- if (c->x86 == 6 && (c->x86_model == 9 || c->x86_model == 13)) {
- rdmsr(MSR_THERM2_CTL, l, h);
- if (l & MSR_THERM2_CTL_TM_SELECT)
- tm2 = 1;
- } else if (l & MSR_IA32_MISC_ENABLE_TM2)
- tm2 = 1;
- }
-
- /* We'll mask the thermal vector in the lapic till we're ready: */
- h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
- apic_write(APIC_LVTTHMR, h);
-
- rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
- if (cpu_has(c, X86_FEATURE_PLN) && !int_pln_enable)
- wrmsr(MSR_IA32_THERM_INTERRUPT,
- (l | (THERM_INT_LOW_ENABLE
- | THERM_INT_HIGH_ENABLE)) & ~THERM_INT_PLN_ENABLE, h);
- else if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable)
- wrmsr(MSR_IA32_THERM_INTERRUPT,
- l | (THERM_INT_LOW_ENABLE
- | THERM_INT_HIGH_ENABLE | THERM_INT_PLN_ENABLE), h);
- else
- wrmsr(MSR_IA32_THERM_INTERRUPT,
- l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
-
- if (cpu_has(c, X86_FEATURE_PTS)) {
- rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
- if (cpu_has(c, X86_FEATURE_PLN) && !int_pln_enable)
- wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
- (l | (PACKAGE_THERM_INT_LOW_ENABLE
- | PACKAGE_THERM_INT_HIGH_ENABLE))
- & ~PACKAGE_THERM_INT_PLN_ENABLE, h);
- else if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable)
- wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
- l | (PACKAGE_THERM_INT_LOW_ENABLE
- | PACKAGE_THERM_INT_HIGH_ENABLE
- | PACKAGE_THERM_INT_PLN_ENABLE), h);
- else
- wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
- l | (PACKAGE_THERM_INT_LOW_ENABLE
- | PACKAGE_THERM_INT_HIGH_ENABLE), h);
- }
-
- smp_thermal_vector = intel_thermal_interrupt;
-
- rdmsr(MSR_IA32_MISC_ENABLE, l, h);
- wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
-
- pr_info_once("CPU0: Thermal monitoring enabled (%s)\n",
- tm2 ? "TM2" : "TM1");
-
- /* enable thermal throttle processing */
- atomic_set(&therm_throt_en, 1);
-}
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index c5dd503..d4ad344 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -21,6 +21,7 @@
#include <asm/hw_irq.h>
#include <asm/desc.h>
#include <asm/traps.h>
+#include <asm/thermal.h>
#define CREATE_TRACE_POINTS
#include <asm/trace/irq_vectors.h>
@@ -374,3 +375,23 @@ void fixup_irqs(void)
}
}
#endif
+
+#ifdef CONFIG_X86_THERMAL_VECTOR
+static void smp_thermal_vector(void)
+{
+ if (x86_thermal_enabled())
+ intel_thermal_interrupt();
+ else
+ pr_err("CPU%d: Unexpected LVT thermal interrupt!\n",
+ smp_processor_id());
+}
+
+DEFINE_IDTENTRY_SYSVEC(sysvec_thermal)
+{
+ trace_thermal_apic_entry(THERMAL_APIC_VECTOR);
+ inc_irq_stat(irq_thermal_count);
+ smp_thermal_vector();
+ trace_thermal_apic_exit(THERMAL_APIC_VECTOR);
+ ack_APIC_irq();
+}
+#endif
diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig
index 8025b21..ce4f592 100644
--- a/drivers/thermal/intel/Kconfig
+++ b/drivers/thermal/intel/Kconfig
@@ -8,6 +8,10 @@ config INTEL_POWERCLAMP
enforce idle time which results in more package C-state residency. The
user interface is exposed via generic thermal framework.
+config X86_THERMAL_VECTOR
+ def_bool y
+ depends on X86 && CPU_SUP_INTEL && X86_LOCAL_APIC
+
config X86_PKG_TEMP_THERMAL
tristate "X86 package temperature thermal driver"
depends on X86_THERMAL_VECTOR
diff --git a/drivers/thermal/intel/Makefile b/drivers/thermal/intel/Makefile
index 0d9736c..ff2ad30 100644
--- a/drivers/thermal/intel/Makefile
+++ b/drivers/thermal/intel/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
+obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
diff --git a/drivers/thermal/intel/therm_throt.c b/drivers/thermal/intel/therm_throt.c
new file mode 100644
index 0000000..f8e8825
--- /dev/null
+++ b/drivers/thermal/intel/therm_throt.c
@@ -0,0 +1,718 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Thermal throttle event support code (such as syslog messaging and rate
+ * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
+ *
+ * This allows consistent reporting of CPU thermal throttle events.
+ *
+ * Maintains a counter in /sys that keeps track of the number of thermal
+ * events, such that the user knows how bad the thermal problem might be
+ * (since the logging to syslog is rate limited).
+ *
+ * Author: Dmitriy Zavin (dmitriyz@google.com)
+ *
+ * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
+ * Inspired by Ross Biro's and Al Borchers' counter code.
+ */
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+
+#include <asm/processor.h>
+#include <asm/thermal.h>
+#include <asm/traps.h>
+#include <asm/apic.h>
+#include <asm/irq.h>
+#include <asm/msr.h>
+
+#include "thermal_interrupt.h"
+
+/* How long to wait between reporting thermal events */
+#define CHECK_INTERVAL (300 * HZ)
+
+#define THERMAL_THROTTLING_EVENT 0
+#define POWER_LIMIT_EVENT 1
+
+/**
+ * struct _thermal_state - Represent the current thermal event state
+ * @next_check: Stores the next timestamp, when it is allowed
+ * to log the next warning message.
+ * @last_interrupt_time: Stores the timestamp for the last threshold
+ * high event.
+ * @therm_work: Delayed workqueue structure
+ * @count: Stores the current running count for thermal
+ * or power threshold interrupts.
+ * @last_count: Stores the previous running count for thermal
+ * or power threshold interrupts.
+ * @max_time_ms: This shows the maximum amount of time CPU was
+ * in throttled state for a single thermal
+ * threshold high to low state.
+ * @total_time_ms: This is a cumulative time during which CPU was
+ * in the throttled state.
+ * @rate_control_active: Set when a throttling message is logged.
+ * This is used for the purpose of rate-control.
+ * @new_event: Stores the last high/low status of the
+ * THERM_STATUS_PROCHOT or
+ * THERM_STATUS_POWER_LIMIT.
+ * @level: Stores whether this _thermal_state instance is
+ * for a CORE level or for PACKAGE level.
+ * @sample_index: Index for storing the next sample in the buffer
+ * temp_samples[].
+ * @sample_count: Total number of samples collected in the buffer
+ * temp_samples[].
+ * @average: The last moving average of temperature samples
+ * @baseline_temp: Temperature at which thermal threshold high
+ * interrupt was generated.
+ * @temp_samples: Storage for temperature samples to calculate
+ * moving average.
+ *
+ * This structure is used to represent data related to thermal state for a CPU.
+ * There is a separate storage for core and package level for each CPU.
+ */
+struct _thermal_state {
+ u64 next_check;
+ u64 last_interrupt_time;
+ struct delayed_work therm_work;
+ unsigned long count;
+ unsigned long last_count;
+ unsigned long max_time_ms;
+ unsigned long total_time_ms;
+ bool rate_control_active;
+ bool new_event;
+ u8 level;
+ u8 sample_index;
+ u8 sample_count;
+ u8 average;
+ u8 baseline_temp;
+ u8 temp_samples[3];
+};
+
+struct thermal_state {
+ struct _thermal_state core_throttle;
+ struct _thermal_state core_power_limit;
+ struct _thermal_state package_throttle;
+ struct _thermal_state package_power_limit;
+ struct _thermal_state core_thresh0;
+ struct _thermal_state core_thresh1;
+ struct _thermal_state pkg_thresh0;
+ struct _thermal_state pkg_thresh1;
+};
+
+/* Callback to handle core threshold interrupts */
+int (*platform_thermal_notify)(__u64 msr_val);
+EXPORT_SYMBOL(platform_thermal_notify);
+
+/* Callback to handle core package threshold_interrupts */
+int (*platform_thermal_package_notify)(__u64 msr_val);
+EXPORT_SYMBOL_GPL(platform_thermal_package_notify);
+
+/* Callback support of rate control, return true, if
+ * callback has rate control */
+bool (*platform_thermal_package_rate_control)(void);
+EXPORT_SYMBOL_GPL(platform_thermal_package_rate_control);
+
+
+static DEFINE_PER_CPU(struct thermal_state, thermal_state);
+
+static atomic_t therm_throt_en = ATOMIC_INIT(0);
+
+static u32 lvtthmr_init __read_mostly;
+
+#ifdef CONFIG_SYSFS
+#define define_therm_throt_device_one_ro(_name) \
+ static DEVICE_ATTR(_name, 0444, \
+ therm_throt_device_show_##_name, \
+ NULL) \
+
+#define define_therm_throt_device_show_func(event, name) \
+ \
+static ssize_t therm_throt_device_show_##event##_##name( \
+ struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ unsigned int cpu = dev->id; \
+ ssize_t ret; \
+ \
+ preempt_disable(); /* CPU hotplug */ \
+ if (cpu_online(cpu)) { \
+ ret = sprintf(buf, "%lu\n", \
+ per_cpu(thermal_state, cpu).event.name); \
+ } else \
+ ret = 0; \
+ preempt_enable(); \
+ \
+ return ret; \
+}
+
+define_therm_throt_device_show_func(core_throttle, count);
+define_therm_throt_device_one_ro(core_throttle_count);
+
+define_therm_throt_device_show_func(core_power_limit, count);
+define_therm_throt_device_one_ro(core_power_limit_count);
+
+define_therm_throt_device_show_func(package_throttle, count);
+define_therm_throt_device_one_ro(package_throttle_count);
+
+define_therm_throt_device_show_func(package_power_limit, count);
+define_therm_throt_device_one_ro(package_power_limit_count);
+
+define_therm_throt_device_show_func(core_throttle, max_time_ms);
+define_therm_throt_device_one_ro(core_throttle_max_time_ms);
+
+define_therm_throt_device_show_func(package_throttle, max_time_ms);
+define_therm_throt_device_one_ro(package_throttle_max_time_ms);
+
+define_therm_throt_device_show_func(core_throttle, total_time_ms);
+define_therm_throt_device_one_ro(core_throttle_total_time_ms);
+
+define_therm_throt_device_show_func(package_throttle, total_time_ms);
+define_therm_throt_device_one_ro(package_throttle_total_time_ms);
+
+static struct attribute *thermal_throttle_attrs[] = {
+ &dev_attr_core_throttle_count.attr,
+ &dev_attr_core_throttle_max_time_ms.attr,
+ &dev_attr_core_throttle_total_time_ms.attr,
+ NULL
+};
+
+static const struct attribute_group thermal_attr_group = {
+ .attrs = thermal_throttle_attrs,
+ .name = "thermal_throttle"
+};
+#endif /* CONFIG_SYSFS */
+
+#define CORE_LEVEL 0
+#define PACKAGE_LEVEL 1
+
+#define THERM_THROT_POLL_INTERVAL HZ
+#define THERM_STATUS_PROCHOT_LOG BIT(1)
+
+#define THERM_STATUS_CLEAR_CORE_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11) | BIT(13) | BIT(15))
+#define THERM_STATUS_CLEAR_PKG_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11))
+
+static void clear_therm_status_log(int level)
+{
+ int msr;
+ u64 mask, msr_val;
+
+ if (level == CORE_LEVEL) {
+ msr = MSR_IA32_THERM_STATUS;
+ mask = THERM_STATUS_CLEAR_CORE_MASK;
+ } else {
+ msr = MSR_IA32_PACKAGE_THERM_STATUS;
+ mask = THERM_STATUS_CLEAR_PKG_MASK;
+ }
+
+ rdmsrl(msr, msr_val);
+ msr_val &= mask;
+ wrmsrl(msr, msr_val & ~THERM_STATUS_PROCHOT_LOG);
+}
+
+static void get_therm_status(int level, bool *proc_hot, u8 *temp)
+{
+ int msr;
+ u64 msr_val;
+
+ if (level == CORE_LEVEL)
+ msr = MSR_IA32_THERM_STATUS;
+ else
+ msr = MSR_IA32_PACKAGE_THERM_STATUS;
+
+ rdmsrl(msr, msr_val);
+ if (msr_val & THERM_STATUS_PROCHOT_LOG)
+ *proc_hot = true;
+ else
+ *proc_hot = false;
+
+ *temp = (msr_val >> 16) & 0x7F;
+}
+
+static void __maybe_unused throttle_active_work(struct work_struct *work)
+{
+ struct _thermal_state *state = container_of(to_delayed_work(work),
+ struct _thermal_state, therm_work);
+ unsigned int i, avg, this_cpu = smp_processor_id();
+ u64 now = get_jiffies_64();
+ bool hot;
+ u8 temp;
+
+ get_therm_status(state->level, &hot, &temp);
+ /* temperature value is offset from the max so lesser means hotter */
+ if (!hot && temp > state->baseline_temp) {
+ if (state->rate_control_active)
+ pr_info("CPU%d: %s temperature/speed normal (total events = %lu)\n",
+ this_cpu,
+ state->level == CORE_LEVEL ? "Core" : "Package",
+ state->count);
+
+ state->rate_control_active = false;
+ return;
+ }
+
+ if (time_before64(now, state->next_check) &&
+ state->rate_control_active)
+ goto re_arm;
+
+ state->next_check = now + CHECK_INTERVAL;
+
+ if (state->count != state->last_count) {
+ /* There was one new thermal interrupt */
+ state->last_count = state->count;
+ state->average = 0;
+ state->sample_count = 0;
+ state->sample_index = 0;
+ }
+
+ state->temp_samples[state->sample_index] = temp;
+ state->sample_count++;
+ state->sample_index = (state->sample_index + 1) % ARRAY_SIZE(state->temp_samples);
+ if (state->sample_count < ARRAY_SIZE(state->temp_samples))
+ goto re_arm;
+
+ avg = 0;
+ for (i = 0; i < ARRAY_SIZE(state->temp_samples); ++i)
+ avg += state->temp_samples[i];
+
+ avg /= ARRAY_SIZE(state->temp_samples);
+
+ if (state->average > avg) {
+ pr_warn("CPU%d: %s temperature is above threshold, cpu clock is throttled (total events = %lu)\n",
+ this_cpu,
+ state->level == CORE_LEVEL ? "Core" : "Package",
+ state->count);
+ state->rate_control_active = true;
+ }
+
+ state->average = avg;
+
+re_arm:
+ clear_therm_status_log(state->level);
+ schedule_delayed_work_on(this_cpu, &state->therm_work, THERM_THROT_POLL_INTERVAL);
+}
+
+/***
+ * therm_throt_process - Process thermal throttling event from interrupt
+ * @curr: Whether the condition is current or not (boolean), since the
+ * thermal interrupt normally gets called both when the thermal
+ * event begins and once the event has ended.
+ *
+ * This function is called by the thermal interrupt after the
+ * IRQ has been acknowledged.
+ *
+ * It will take care of rate limiting and printing messages to the syslog.
+ */
+static void therm_throt_process(bool new_event, int event, int level)
+{
+ struct _thermal_state *state;
+ unsigned int this_cpu = smp_processor_id();
+ bool old_event;
+ u64 now;
+ struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
+
+ now = get_jiffies_64();
+ if (level == CORE_LEVEL) {
+ if (event == THERMAL_THROTTLING_EVENT)
+ state = &pstate->core_throttle;
+ else if (event == POWER_LIMIT_EVENT)
+ state = &pstate->core_power_limit;
+ else
+ return;
+ } else if (level == PACKAGE_LEVEL) {
+ if (event == THERMAL_THROTTLING_EVENT)
+ state = &pstate->package_throttle;
+ else if (event == POWER_LIMIT_EVENT)
+ state = &pstate->package_power_limit;
+ else
+ return;
+ } else
+ return;
+
+ old_event = state->new_event;
+ state->new_event = new_event;
+
+ if (new_event)
+ state->count++;
+
+ if (event != THERMAL_THROTTLING_EVENT)
+ return;
+
+ if (new_event && !state->last_interrupt_time) {
+ bool hot;
+ u8 temp;
+
+ get_therm_status(state->level, &hot, &temp);
+ /*
+ * Ignore short temperature spike as the system is not close
+ * to PROCHOT. 10C offset is large enough to ignore. It is
+ * already dropped from the high threshold temperature.
+ */
+ if (temp > 10)
+ return;
+
+ state->baseline_temp = temp;
+ state->last_interrupt_time = now;
+ schedule_delayed_work_on(this_cpu, &state->therm_work, THERM_THROT_POLL_INTERVAL);
+ } else if (old_event && state->last_interrupt_time) {
+ unsigned long throttle_time;
+
+ throttle_time = jiffies_delta_to_msecs(now - state->last_interrupt_time);
+ if (throttle_time > state->max_time_ms)
+ state->max_time_ms = throttle_time;
+ state->total_time_ms += throttle_time;
+ state->last_interrupt_time = 0;
+ }
+}
+
+static int thresh_event_valid(int level, int event)
+{
+ struct _thermal_state *state;
+ unsigned int this_cpu = smp_processor_id();
+ struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
+ u64 now = get_jiffies_64();
+
+ if (level == PACKAGE_LEVEL)
+ state = (event == 0) ? &pstate->pkg_thresh0 :
+ &pstate->pkg_thresh1;
+ else
+ state = (event == 0) ? &pstate->core_thresh0 :
+ &pstate->core_thresh1;
+
+ if (time_before64(now, state->next_check))
+ return 0;
+
+ state->next_check = now + CHECK_INTERVAL;
+
+ return 1;
+}
+
+static bool int_pln_enable;
+static int __init int_pln_enable_setup(char *s)
+{
+ int_pln_enable = true;
+
+ return 1;
+}
+__setup("int_pln_enable", int_pln_enable_setup);
+
+#ifdef CONFIG_SYSFS
+/* Add/Remove thermal_throttle interface for CPU device: */
+static int thermal_throttle_add_dev(struct device *dev, unsigned int cpu)
+{
+ int err;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+ err = sysfs_create_group(&dev->kobj, &thermal_attr_group);
+ if (err)
+ return err;
+
+ if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) {
+ err = sysfs_add_file_to_group(&dev->kobj,
+ &dev_attr_core_power_limit_count.attr,
+ thermal_attr_group.name);
+ if (err)
+ goto del_group;
+ }
+
+ if (cpu_has(c, X86_FEATURE_PTS)) {
+ err = sysfs_add_file_to_group(&dev->kobj,
+ &dev_attr_package_throttle_count.attr,
+ thermal_attr_group.name);
+ if (err)
+ goto del_group;
+
+ err = sysfs_add_file_to_group(&dev->kobj,
+ &dev_attr_package_throttle_max_time_ms.attr,
+ thermal_attr_group.name);
+ if (err)
+ goto del_group;
+
+ err = sysfs_add_file_to_group(&dev->kobj,
+ &dev_attr_package_throttle_total_time_ms.attr,
+ thermal_attr_group.name);
+ if (err)
+ goto del_group;
+
+ if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) {
+ err = sysfs_add_file_to_group(&dev->kobj,
+ &dev_attr_package_power_limit_count.attr,
+ thermal_attr_group.name);
+ if (err)
+ goto del_group;
+ }
+ }
+
+ return 0;
+
+del_group:
+ sysfs_remove_group(&dev->kobj, &thermal_attr_group);
+
+ return err;
+}
+
+static void thermal_throttle_remove_dev(struct device *dev)
+{
+ sysfs_remove_group(&dev->kobj, &thermal_attr_group);
+}
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static int thermal_throttle_online(unsigned int cpu)
+{
+ struct thermal_state *state = &per_cpu(thermal_state, cpu);
+ struct device *dev = get_cpu_device(cpu);
+ u32 l;
+
+ state->package_throttle.level = PACKAGE_LEVEL;
+ state->core_throttle.level = CORE_LEVEL;
+
+ INIT_DELAYED_WORK(&state->package_throttle.therm_work, throttle_active_work);
+ INIT_DELAYED_WORK(&state->core_throttle.therm_work, throttle_active_work);
+
+ /* Unmask the thermal vector after the above workqueues are initialized. */
+ l = apic_read(APIC_LVTTHMR);
+ apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+ return thermal_throttle_add_dev(dev, cpu);
+}
+
+static int thermal_throttle_offline(unsigned int cpu)
+{
+ struct thermal_state *state = &per_cpu(thermal_state, cpu);
+ struct device *dev = get_cpu_device(cpu);
+ u32 l;
+
+ /* Mask the thermal vector before draining evtl. pending work */
+ l = apic_read(APIC_LVTTHMR);
+ apic_write(APIC_LVTTHMR, l | APIC_LVT_MASKED);
+
+ cancel_delayed_work_sync(&state->package_throttle.therm_work);
+ cancel_delayed_work_sync(&state->core_throttle.therm_work);
+
+ state->package_throttle.rate_control_active = false;
+ state->core_throttle.rate_control_active = false;
+
+ thermal_throttle_remove_dev(dev);
+ return 0;
+}
+
+static __init int thermal_throttle_init_device(void)
+{
+ int ret;
+
+ if (!atomic_read(&therm_throt_en))
+ return 0;
+
+ ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/therm:online",
+ thermal_throttle_online,
+ thermal_throttle_offline);
+ return ret < 0 ? ret : 0;
+}
+device_initcall(thermal_throttle_init_device);
+
+#endif /* CONFIG_SYSFS */
+
+static void notify_package_thresholds(__u64 msr_val)
+{
+ bool notify_thres_0 = false;
+ bool notify_thres_1 = false;
+
+ if (!platform_thermal_package_notify)
+ return;
+
+ /* lower threshold check */
+ if (msr_val & THERM_LOG_THRESHOLD0)
+ notify_thres_0 = true;
+ /* higher threshold check */
+ if (msr_val & THERM_LOG_THRESHOLD1)
+ notify_thres_1 = true;
+
+ if (!notify_thres_0 && !notify_thres_1)
+ return;
+
+ if (platform_thermal_package_rate_control &&
+ platform_thermal_package_rate_control()) {
+ /* Rate control is implemented in callback */
+ platform_thermal_package_notify(msr_val);
+ return;
+ }
+
+ /* lower threshold reached */
+ if (notify_thres_0 && thresh_event_valid(PACKAGE_LEVEL, 0))
+ platform_thermal_package_notify(msr_val);
+ /* higher threshold reached */
+ if (notify_thres_1 && thresh_event_valid(PACKAGE_LEVEL, 1))
+ platform_thermal_package_notify(msr_val);
+}
+
+static void notify_thresholds(__u64 msr_val)
+{
+ /* check whether the interrupt handler is defined;
+ * otherwise simply return
+ */
+ if (!platform_thermal_notify)
+ return;
+
+ /* lower threshold reached */
+ if ((msr_val & THERM_LOG_THRESHOLD0) &&
+ thresh_event_valid(CORE_LEVEL, 0))
+ platform_thermal_notify(msr_val);
+ /* higher threshold reached */
+ if ((msr_val & THERM_LOG_THRESHOLD1) &&
+ thresh_event_valid(CORE_LEVEL, 1))
+ platform_thermal_notify(msr_val);
+}
+
+/* Thermal transition interrupt handler */
+void intel_thermal_interrupt(void)
+{
+ __u64 msr_val;
+
+ if (static_cpu_has(X86_FEATURE_HWP))
+ wrmsrl_safe(MSR_HWP_STATUS, 0);
+
+ rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
+
+ /* Check for violation of core thermal thresholds*/
+ notify_thresholds(msr_val);
+
+ therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
+ THERMAL_THROTTLING_EVENT,
+ CORE_LEVEL);
+
+ if (this_cpu_has(X86_FEATURE_PLN) && int_pln_enable)
+ therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
+ POWER_LIMIT_EVENT,
+ CORE_LEVEL);
+
+ if (this_cpu_has(X86_FEATURE_PTS)) {
+ rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
+ /* check violations of package thermal thresholds */
+ notify_package_thresholds(msr_val);
+ therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
+ THERMAL_THROTTLING_EVENT,
+ PACKAGE_LEVEL);
+ if (this_cpu_has(X86_FEATURE_PLN) && int_pln_enable)
+ therm_throt_process(msr_val &
+ PACKAGE_THERM_STATUS_POWER_LIMIT,
+ POWER_LIMIT_EVENT,
+ PACKAGE_LEVEL);
+ }
+}
+
+/* Thermal monitoring depends on APIC, ACPI and clock modulation */
+static int intel_thermal_supported(struct cpuinfo_x86 *c)
+{
+ if (!boot_cpu_has(X86_FEATURE_APIC))
+ return 0;
+ if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+ return 0;
+ return 1;
+}
+
+bool x86_thermal_enabled(void)
+{
+ return atomic_read(&therm_throt_en);
+}
+
+void intel_init_thermal(struct cpuinfo_x86 *c)
+{
+ unsigned int cpu = smp_processor_id();
+ int tm2 = 0;
+ u32 l, h;
+
+ if (!intel_thermal_supported(c))
+ return;
+
+ /* On the BSP? */
+ if (c == &boot_cpu_data)
+ lvtthmr_init = apic_read(APIC_LVTTHMR);
+
+ /*
+ * First check if its enabled already, in which case there might
+ * be some SMM goo which handles it, so we can't even put a handler
+ * since it might be delivered via SMI already:
+ */
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+ h = lvtthmr_init;
+ /*
+ * The initial value of thermal LVT entries on all APs always reads
+ * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
+ * sequence to them and LVT registers are reset to 0s except for
+ * the mask bits which are set to 1s when APs receive INIT IPI.
+ * If BIOS takes over the thermal interrupt and sets its interrupt
+ * delivery mode to SMI (not fixed), it restores the value that the
+ * BIOS has programmed on AP based on BSP's info we saved since BIOS
+ * is always setting the same value for all threads/cores.
+ */
+ if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED)
+ apic_write(APIC_LVTTHMR, lvtthmr_init);
+
+
+ if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
+ if (system_state == SYSTEM_BOOTING)
+ pr_debug("CPU%d: Thermal monitoring handled by SMI\n", cpu);
+ return;
+ }
+
+ /* early Pentium M models use different method for enabling TM2 */
+ if (cpu_has(c, X86_FEATURE_TM2)) {
+ if (c->x86 == 6 && (c->x86_model == 9 || c->x86_model == 13)) {
+ rdmsr(MSR_THERM2_CTL, l, h);
+ if (l & MSR_THERM2_CTL_TM_SELECT)
+ tm2 = 1;
+ } else if (l & MSR_IA32_MISC_ENABLE_TM2)
+ tm2 = 1;
+ }
+
+ /* We'll mask the thermal vector in the lapic till we're ready: */
+ h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
+ apic_write(APIC_LVTTHMR, h);
+
+ rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+ if (cpu_has(c, X86_FEATURE_PLN) && !int_pln_enable)
+ wrmsr(MSR_IA32_THERM_INTERRUPT,
+ (l | (THERM_INT_LOW_ENABLE
+ | THERM_INT_HIGH_ENABLE)) & ~THERM_INT_PLN_ENABLE, h);
+ else if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable)
+ wrmsr(MSR_IA32_THERM_INTERRUPT,
+ l | (THERM_INT_LOW_ENABLE
+ | THERM_INT_HIGH_ENABLE | THERM_INT_PLN_ENABLE), h);
+ else
+ wrmsr(MSR_IA32_THERM_INTERRUPT,
+ l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+
+ if (cpu_has(c, X86_FEATURE_PTS)) {
+ rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+ if (cpu_has(c, X86_FEATURE_PLN) && !int_pln_enable)
+ wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+ (l | (PACKAGE_THERM_INT_LOW_ENABLE
+ | PACKAGE_THERM_INT_HIGH_ENABLE))
+ & ~PACKAGE_THERM_INT_PLN_ENABLE, h);
+ else if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable)
+ wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+ l | (PACKAGE_THERM_INT_LOW_ENABLE
+ | PACKAGE_THERM_INT_HIGH_ENABLE
+ | PACKAGE_THERM_INT_PLN_ENABLE), h);
+ else
+ wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+ l | (PACKAGE_THERM_INT_LOW_ENABLE
+ | PACKAGE_THERM_INT_HIGH_ENABLE), h);
+ }
+
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+
+ pr_info_once("CPU0: Thermal monitoring enabled (%s)\n",
+ tm2 ? "TM2" : "TM1");
+
+ /* enable thermal throttle processing */
+ atomic_set(&therm_throt_en, 1);
+}
diff --git a/drivers/thermal/intel/thermal_interrupt.h b/drivers/thermal/intel/thermal_interrupt.h
new file mode 100644
index 0000000..53f427b
--- /dev/null
+++ b/drivers/thermal/intel/thermal_interrupt.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _INTEL_THERMAL_INTERRUPT_H
+#define _INTEL_THERMAL_INTERRUPT_H
+
+/* Interrupt Handler for package thermal thresholds */
+extern int (*platform_thermal_package_notify)(__u64 msr_val);
+
+/* Interrupt Handler for core thermal thresholds */
+extern int (*platform_thermal_notify)(__u64 msr_val);
+
+/* Callback support of rate control, return true, if
+ * callback has rate control */
+extern bool (*platform_thermal_package_rate_control)(void);
+
+#endif /* _INTEL_THERMAL_INTERRUPT_H */
diff --git a/drivers/thermal/intel/x86_pkg_temp_thermal.c b/drivers/thermal/intel/x86_pkg_temp_thermal.c
index b81c332..295742e 100644
--- a/drivers/thermal/intel/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c
@@ -17,8 +17,10 @@
#include <linux/pm.h>
#include <linux/thermal.h>
#include <linux/debugfs.h>
+
#include <asm/cpu_device_id.h>
-#include <asm/mce.h>
+
+#include "thermal_interrupt.h"
/*
* Rate control delay: Idea is to introduce denounce effect
^ permalink raw reply related [flat|nested] 10+ messages in thread