[PATCH net-next v2] net: phy: broadcom: remove BCM5482 1000Base-BX support

* [PATCH net-next v2] net: phy: broadcom: remove BCM5482 1000Base-BX support
@ 2021-02-08 23:17 Michael Walle
  2021-02-09  1:30 ` Andrew Lunn
  2021-02-09 19:20 ` patchwork-bot+netdevbpf
  0 siblings, 2 replies; 4+ messages in thread
From: Michael Walle @ 2021-02-08 23:17 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, netdev, linux-kernel
  Cc: Florian Fainelli, Andrew Lunn, Heiner Kallweit, Russell King,
	David S . Miller, Jakub Kicinski, Michael Walle

It is nowhere used in the kernel. It also seems to be lacking the
proper fiber advertise flags. Remove it.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
changes since v1:
 - added queue to subject
 - reworded 1000BX to 1000Base-BX

 drivers/net/phy/broadcom.c | 93 +-------------------------------------
 1 file changed, 1 insertion(+), 92 deletions(-)

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 8a4ec3222168..3142ba768313 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -361,96 +361,6 @@ static int bcm54811_config_init(struct phy_device *phydev)
 	return err;
 }
 
-static int bcm5482_config_init(struct phy_device *phydev)
-{
-	int err, reg;
-
-	err = bcm54xx_config_init(phydev);
-
-	if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
-		/*
-		 * Enable secondary SerDes and its use as an LED source
-		 */
-		reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_SSD);
-		bcm_phy_write_shadow(phydev, BCM5482_SHD_SSD,
-				     reg |
-				     BCM5482_SHD_SSD_LEDM |
-				     BCM5482_SHD_SSD_EN);
-
-		/*
-		 * Enable SGMII slave mode and auto-detection
-		 */
-		reg = BCM5482_SSD_SGMII_SLAVE | MII_BCM54XX_EXP_SEL_SSD;
-		err = bcm_phy_read_exp(phydev, reg);
-		if (err < 0)
-			return err;
-		err = bcm_phy_write_exp(phydev, reg, err |
-					BCM5482_SSD_SGMII_SLAVE_EN |
-					BCM5482_SSD_SGMII_SLAVE_AD);
-		if (err < 0)
-			return err;
-
-		/*
-		 * Disable secondary SerDes powerdown
-		 */
-		reg = BCM5482_SSD_1000BX_CTL | MII_BCM54XX_EXP_SEL_SSD;
-		err = bcm_phy_read_exp(phydev, reg);
-		if (err < 0)
-			return err;
-		err = bcm_phy_write_exp(phydev, reg,
-					err & ~BCM5482_SSD_1000BX_CTL_PWRDOWN);
-		if (err < 0)
-			return err;
-
-		/*
-		 * Select 1000BASE-X register set (primary SerDes)
-		 */
-		reg = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE);
-		bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE,
-				     reg | BCM54XX_SHD_MODE_1000BX);
-
-		/*
-		 * LED1=ACTIVITYLED, LED3=LINKSPD[2]
-		 * (Use LED1 as secondary SerDes ACTIVITY LED)
-		 */
-		bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1,
-			BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
-			BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2));
-
-		/*
-		 * Auto-negotiation doesn't seem to work quite right
-		 * in this mode, so we disable it and force it to the
-		 * right speed/duplex setting.  Only 'link status'
-		 * is important.
-		 */
-		phydev->autoneg = AUTONEG_DISABLE;
-		phydev->speed = SPEED_1000;
-		phydev->duplex = DUPLEX_FULL;
-	}
-
-	return err;
-}
-
-static int bcm5482_read_status(struct phy_device *phydev)
-{
-	int err;
-
-	err = genphy_read_status(phydev);
-
-	if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
-		/*
-		 * Only link status matters for 1000Base-X mode, so force
-		 * 1000 Mbit/s full-duplex status
-		 */
-		if (phydev->link) {
-			phydev->speed = SPEED_1000;
-			phydev->duplex = DUPLEX_FULL;
-		}
-	}
-
-	return err;
-}
-
 static int bcm5481_config_aneg(struct phy_device *phydev)
 {
 	struct device_node *np = phydev->mdio.dev.of_node;
@@ -800,8 +710,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5482",
 	/* PHY_GBIT_FEATURES */
-	.config_init	= bcm5482_config_init,
-	.read_status	= bcm5482_read_status,
+	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
 }, {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread