linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: linux-cxl@vger.kernel.org
Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org,
	ira.weiny@intel.com, vishal.l.verma@intel.com,
	alison.schofield@intel.com, ben.widawsky@intel.com,
	linux-kernel@vger.kernel.org
Subject: [PATCH 4/8] cxl/core: Refactor CXL register lookup for bridge reuse
Date: Wed, 24 Mar 2021 14:30:46 -0700	[thread overview]
Message-ID: <161662144627.1723715.7776509014834832493.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <161662142382.1723715.5934723983022398253.stgit@dwillia2-desk3.amr.corp.intel.com>

While CXL Memory Device endpoints locate the CXL MMIO registers in a PCI
BAR, CXL root bridges have their MMIO base address described by platform
firmware. Refactor the existing register lookup into a generic facility
for endpoints and bridges to share.

Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/cxl/core.c |   57 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/cxl/cxl.h  |    3 +++
 drivers/cxl/mem.c  |   50 +++++-----------------------------------------
 3 files changed, 65 insertions(+), 45 deletions(-)

diff --git a/drivers/cxl/core.c b/drivers/cxl/core.c
index 7f8d2034038a..2ab467ef9909 100644
--- a/drivers/cxl/core.c
+++ b/drivers/cxl/core.c
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
+/* Copyright(c) 2020-2021 Intel Corporation. All rights reserved. */
 #include <linux/device.h>
 #include <linux/module.h>
+#include "cxl.h"
 
 /**
  * DOC: cxl core
@@ -10,6 +11,60 @@
  * point for cross-device interleave coordination through cxl ports.
  */
 
+/*
+ * cxl_setup_device_regs() - Detect CXL Device register blocks
+ * @dev: Host device of the @base mapping
+ * @base: mapping of CXL 2.0 8.2.8 CXL Device Register Interface
+ */
+void cxl_setup_device_regs(struct device *dev, void __iomem *base,
+			   struct cxl_device_regs *regs)
+{
+	int cap, cap_count;
+	u64 cap_array;
+
+	*regs = (struct cxl_device_regs) { 0 };
+
+	cap_array = readq(base + CXLDEV_CAP_ARRAY_OFFSET);
+	if (FIELD_GET(CXLDEV_CAP_ARRAY_ID_MASK, cap_array) !=
+	    CXLDEV_CAP_ARRAY_CAP_ID)
+		return;
+
+	cap_count = FIELD_GET(CXLDEV_CAP_ARRAY_COUNT_MASK, cap_array);
+
+	for (cap = 1; cap <= cap_count; cap++) {
+		void __iomem *register_block;
+		u32 offset;
+		u16 cap_id;
+
+		cap_id = FIELD_GET(CXLDEV_CAP_HDR_CAP_ID_MASK,
+				   readl(base + cap * 0x10));
+		offset = readl(base + cap * 0x10 + 0x4);
+		register_block = base + offset;
+
+		switch (cap_id) {
+		case CXLDEV_CAP_CAP_ID_DEVICE_STATUS:
+			dev_dbg(dev, "found Status capability (0x%x)\n", offset);
+			regs->status = register_block;
+			break;
+		case CXLDEV_CAP_CAP_ID_PRIMARY_MAILBOX:
+			dev_dbg(dev, "found Mailbox capability (0x%x)\n", offset);
+			regs->mbox = register_block;
+			break;
+		case CXLDEV_CAP_CAP_ID_SECONDARY_MAILBOX:
+			dev_dbg(dev, "found Secondary Mailbox capability (0x%x)\n", offset);
+			break;
+		case CXLDEV_CAP_CAP_ID_MEMDEV:
+			dev_dbg(dev, "found Memory Device capability (0x%x)\n", offset);
+			regs->memdev = register_block;
+			break;
+		default:
+			dev_dbg(dev, "Unknown cap ID: %d (0x%x)\n", cap_id, offset);
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(cxl_setup_device_regs);
+
 struct bus_type cxl_bus_type = {
 	.name = "cxl",
 };
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 37325e504fb7..cbd29650c4e2 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -67,5 +67,8 @@ struct cxl_regs {
 	};
 };
 
+void cxl_setup_device_regs(struct device *dev, void __iomem *base,
+			   struct cxl_device_regs *regs);
+
 extern struct bus_type cxl_bus_type;
 #endif /* __CXL_H__ */
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index 6951243d128e..ee55abfa147e 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -865,53 +865,15 @@ static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode,
 static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
 {
 	struct device *dev = &cxlm->pdev->dev;
-	int cap, cap_count;
-	u64 cap_array;
+	struct cxl_regs *regs = &cxlm->regs;
 
-	cap_array = readq(cxlm->base + CXLDEV_CAP_ARRAY_OFFSET);
-	if (FIELD_GET(CXLDEV_CAP_ARRAY_ID_MASK, cap_array) !=
-	    CXLDEV_CAP_ARRAY_CAP_ID)
-		return -ENODEV;
-
-	cap_count = FIELD_GET(CXLDEV_CAP_ARRAY_COUNT_MASK, cap_array);
-
-	for (cap = 1; cap <= cap_count; cap++) {
-		void __iomem *register_block;
-		u32 offset;
-		u16 cap_id;
-
-		cap_id = FIELD_GET(CXLDEV_CAP_HDR_CAP_ID_MASK,
-				   readl(cxlm->base + cap * 0x10));
-		offset = readl(cxlm->base + cap * 0x10 + 0x4);
-		register_block = cxlm->base + offset;
-
-		switch (cap_id) {
-		case CXLDEV_CAP_CAP_ID_DEVICE_STATUS:
-			dev_dbg(dev, "found Status capability (0x%x)\n", offset);
-			cxlm->regs.status = register_block;
-			break;
-		case CXLDEV_CAP_CAP_ID_PRIMARY_MAILBOX:
-			dev_dbg(dev, "found Mailbox capability (0x%x)\n", offset);
-			cxlm->regs.mbox = register_block;
-			break;
-		case CXLDEV_CAP_CAP_ID_SECONDARY_MAILBOX:
-			dev_dbg(dev, "found Secondary Mailbox capability (0x%x)\n", offset);
-			break;
-		case CXLDEV_CAP_CAP_ID_MEMDEV:
-			dev_dbg(dev, "found Memory Device capability (0x%x)\n", offset);
-			cxlm->regs.memdev = register_block;
-			break;
-		default:
-			dev_dbg(dev, "Unknown cap ID: %d (0x%x)\n", cap_id, offset);
-			break;
-		}
-	}
+	cxl_setup_device_regs(dev, cxlm->base, &regs->device_regs);
 
-	if (!cxlm->regs.status || !cxlm->regs.mbox || !cxlm->regs.memdev) {
+	if (!regs->status || !regs->mbox || !regs->memdev) {
 		dev_err(dev, "registers not found: %s%s%s\n",
-			!cxlm->regs.status ? "status " : "",
-			!cxlm->regs.mbox ? "mbox " : "",
-			!cxlm->regs.memdev ? "memdev" : "");
+			!regs->status ? "status " : "",
+			!regs->mbox ? "mbox " : "",
+			!regs->memdev ? "memdev" : "");
 		return -ENXIO;
 	}
 


  parent reply	other threads:[~2021-03-24 21:31 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-24 21:30 [PATCH 0/8] CXL Port Enumeration Dan Williams
2021-03-24 21:30 ` [PATCH 1/8] cxl/mem: Move some definitions to mem.h Dan Williams
2021-03-24 21:30 ` [PATCH 2/8] cxl/mem: Introduce 'struct cxl_regs' Dan Williams
2021-03-25  8:15   ` Christoph Hellwig
2021-03-29 19:01     ` Williams, Dan J
2021-03-24 21:30 ` [PATCH 3/8] cxl/core: Rename bus.c to core.c Dan Williams
2021-03-24 21:30 ` Dan Williams [this message]
2021-03-26  1:11   ` [PATCH 4/8] cxl/core: Refactor CXL register lookup for bridge reuse kernel test robot
2021-03-24 21:30 ` [PATCH 5/8] cxl/acpi: Introduce ACPI0017 driver and cxl_root Dan Williams
2021-03-24 21:30 ` [PATCH 6/8] cxl/Kconfig: Default drivers to CONFIG_CXL_BUS Dan Williams
2021-03-24 21:31 ` [PATCH 7/8] cxl/port: Introduce cxl_port objects Dan Williams
2021-03-24 21:31 ` [PATCH 8/8] cxl/acpi: Add module parameters to stand in for ACPI tables Dan Williams
2021-05-07 22:51 [PATCH v3 0/8] CXL Port Enumeration and Plans for v5.14 Dan Williams
2021-05-07 22:51 ` [PATCH 4/8] cxl/core: Refactor CXL register lookup for bridge reuse Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=161662144627.1723715.7776509014834832493.stgit@dwillia2-desk3.amr.corp.intel.com \
    --to=dan.j.williams@intel.com \
    --cc=alison.schofield@intel.com \
    --cc=ben.widawsky@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    --subject='Re: [PATCH 4/8] cxl/core: Refactor CXL register lookup for bridge reuse' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox