From: Liu Ying <victor.liu@nxp.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org, a.hajda@samsung.com,
narmstrong@baylibre.com, robert.foss@linaro.org,
Laurent.pinchart@ideasonboard.com, jonas@kwiboo.se,
jernej.skrabec@siol.net, airlied@linux.ie, daniel@ffwll.ch,
agx@sigxcpu.org, robert.chiras@nxp.com, linux-imx@nxp.com
Subject: [PATCH v3 1/3] drm/bridge: nwl-dsi: Force a full modeset when crtc_state->active is changed to be true
Date: Fri, 23 Apr 2021 17:26:41 +0800 [thread overview]
Message-ID: <1619170003-4817-2-git-send-email-victor.liu@nxp.com> (raw)
In-Reply-To: <1619170003-4817-1-git-send-email-victor.liu@nxp.com>
This patch replaces ->mode_fixup() with ->atomic_check() so that
a full modeset can be requested from there when crtc_state->active
is changed to be true(which implies only connector's DPMS is brought
out of "Off" status, though not necessarily). Bridge functions are
added or changed to accommodate the ->atomic_check() callback. That
full modeset is needed by the up-coming patch which gets MIPI DSI
controller and PHY ready in ->mode_set(), because it makes sure
->mode_set() and ->atomic_disable() are called in pairs.
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
v2->v3:
* Split from the single patch in v2 to clarify changes. (Neil)
drivers/gpu/drm/bridge/nwl-dsi.c | 61 ++++++++++++++++++++------------
1 file changed, 39 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index 66b67402f1acd..c65ca860712d2 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -21,6 +21,7 @@
#include <linux/sys_soc.h>
#include <linux/time64.h>
+#include <drm/drm_atomic_state_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_of.h>
@@ -742,7 +743,9 @@ static int nwl_dsi_disable(struct nwl_dsi *dsi)
return 0;
}
-static void nwl_dsi_bridge_disable(struct drm_bridge *bridge)
+static void
+nwl_dsi_bridge_atomic_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
{
struct nwl_dsi *dsi = bridge_to_dsi(bridge);
int ret;
@@ -803,17 +806,6 @@ static int nwl_dsi_get_dphy_params(struct nwl_dsi *dsi,
return 0;
}
-static bool nwl_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- /* At least LCDIF + NWL needs active high sync */
- adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
- adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
-
- return true;
-}
-
static enum drm_mode_status
nwl_dsi_bridge_mode_valid(struct drm_bridge *bridge,
const struct drm_display_info *info,
@@ -831,6 +823,24 @@ nwl_dsi_bridge_mode_valid(struct drm_bridge *bridge,
return MODE_OK;
}
+static int nwl_dsi_bridge_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+
+ /* At least LCDIF + NWL needs active high sync */
+ adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+ adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+
+ /* Do a full modeset if crtc_state->active is changed to be true. */
+ if (crtc_state->active_changed && crtc_state->active)
+ crtc_state->mode_changed = true;
+
+ return 0;
+}
+
static void
nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
@@ -862,7 +872,9 @@ nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,
drm_mode_debug_printmodeline(adjusted_mode);
}
-static void nwl_dsi_bridge_pre_enable(struct drm_bridge *bridge)
+static void
+nwl_dsi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
{
struct nwl_dsi *dsi = bridge_to_dsi(bridge);
int ret;
@@ -897,7 +909,9 @@ static void nwl_dsi_bridge_pre_enable(struct drm_bridge *bridge)
}
}
-static void nwl_dsi_bridge_enable(struct drm_bridge *bridge)
+static void
+nwl_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
{
struct nwl_dsi *dsi = bridge_to_dsi(bridge);
int ret;
@@ -942,14 +956,17 @@ static void nwl_dsi_bridge_detach(struct drm_bridge *bridge)
}
static const struct drm_bridge_funcs nwl_dsi_bridge_funcs = {
- .pre_enable = nwl_dsi_bridge_pre_enable,
- .enable = nwl_dsi_bridge_enable,
- .disable = nwl_dsi_bridge_disable,
- .mode_fixup = nwl_dsi_bridge_mode_fixup,
- .mode_set = nwl_dsi_bridge_mode_set,
- .mode_valid = nwl_dsi_bridge_mode_valid,
- .attach = nwl_dsi_bridge_attach,
- .detach = nwl_dsi_bridge_detach,
+ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+ .atomic_reset = drm_atomic_helper_bridge_reset,
+ .atomic_check = nwl_dsi_bridge_atomic_check,
+ .atomic_pre_enable = nwl_dsi_bridge_atomic_pre_enable,
+ .atomic_enable = nwl_dsi_bridge_atomic_enable,
+ .atomic_disable = nwl_dsi_bridge_atomic_disable,
+ .mode_set = nwl_dsi_bridge_mode_set,
+ .mode_valid = nwl_dsi_bridge_mode_valid,
+ .attach = nwl_dsi_bridge_attach,
+ .detach = nwl_dsi_bridge_detach,
};
static int nwl_dsi_parse_dt(struct nwl_dsi *dsi)
--
2.25.1
next prev parent reply other threads:[~2021-04-23 9:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-23 9:26 [PATCH v3 0/3] drm/bridge: nwl-dsi: Get MIPI DSI controller and PHY ready in ->mode_set() Liu Ying
2021-04-23 9:26 ` Liu Ying [this message]
2021-04-30 8:35 ` [PATCH v3 1/3] drm/bridge: nwl-dsi: Force a full modeset when crtc_state->active is changed to be true Neil Armstrong
[not found] ` <CAG3jFytcPzo81t8hubAf4Gb1zrVzZVB5D6qP-Dnchef6Zus25Q@mail.gmail.com>
2021-04-30 11:45 ` Liu Ying
2021-04-23 9:26 ` [PATCH v3 2/3] drm/bridge: nwl-dsi: Remove a check on unchanged HS clock rate from ->mode_set() Liu Ying
2021-04-30 8:35 ` Neil Armstrong
2021-04-23 9:26 ` [PATCH v3 3/3] drm/bridge: nwl-dsi: Get MIPI DSI controller and PHY ready in ->mode_set() Liu Ying
2021-04-30 8:35 ` Neil Armstrong
2021-04-30 8:35 ` [PATCH v3 0/3] " Neil Armstrong
2021-04-30 9:17 ` Guido Günther
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1619170003-4817-2-git-send-email-victor.liu@nxp.com \
--to=victor.liu@nxp.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=agx@sigxcpu.org \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robert.chiras@nxp.com \
--cc=robert.foss@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).