[PATCH 1/3] dt-bindings: vendor-prefixes: Add Tang Cheng (TCS)

[PATCH 1/3] dt-bindings: vendor-prefixes: Add Tang Cheng (TCS)

[Ezequiel Garcia]

Shenzhen City Tang Cheng Technology (http://www.tctek.cn/)
is a power management IC manufacturer.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index b12020fb6651..541629d2449b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1117,6 +1117,8 @@ patternProperties:
     description: Trusted Computing Group
   "^tcl,.*":
     description: Toby Churchill Ltd.
+  "^tcs,.*":
+    description: Shenzhen City Tang Cheng Technology Co., Ltd.
   "^tdo,.*":
     description: Shangai Top Display Optoelectronics Co., Ltd
   "^technexion,.*":
-- 
2.30.0

[PATCH 2/3] dt-bindings: regulator: Add support for TCS4525

[Ezequiel Garcia]

Add a compatible string to support TCS4525/TCS4526 devices,
which are compatible with Fairchild FAN53555 regulators.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
 Documentation/devicetree/bindings/regulator/fan53555.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
index e7fc045281d1..013f096ac0aa 100644
--- a/Documentation/devicetree/bindings/regulator/fan53555.txt
+++ b/Documentation/devicetree/bindings/regulator/fan53555.txt
@@ -1,8 +1,8 @@
 Binding for Fairchild FAN53555 regulators
 
 Required properties:
-  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or
-		"silergy,syr828"
+  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827",
+		"silergy,syr828" or "tcs,tcs4525".
   - reg: I2C address
 
 Optional properties:
-- 
2.30.0

[PATCH 3/3] regulator: fan53555: Add TCS4525 DCDC support

[Ezequiel Garcia]

From: Joseph Chen <chenjh@rock-chips.com>

TCS4525 main features:

- 2.7V to 5.5V Input Voltage Range;
- 3MHz Constant Switching Frequency;
- 5A Available Load Current;
- Programmable Output Voltage: 0.6V to 1.4V in 6.25mV Steps;
- PFM/PWM Operation for Optimum Increased Efficiency;

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
[Ezequiel: Forward port]
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
 drivers/regulator/fan53555.c | 136 +++++++++++++++++++++++++++++++----
 1 file changed, 122 insertions(+), 14 deletions(-)

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index aa426183b6a1..f3918f03aaf3 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -24,6 +24,12 @@
 /* Voltage setting */
 #define FAN53555_VSEL0		0x00
 #define FAN53555_VSEL1		0x01
+
+#define TCS4525_VSEL0		0x11
+#define TCS4525_VSEL1		0x10
+#define TCS4525_TIME		0x13
+#define TCS4525_COMMAND		0x14
+
 /* Control register */
 #define FAN53555_CONTROL	0x02
 /* IC Type */
@@ -49,11 +55,20 @@
 
 #define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
 #define FAN53526_NVOLTAGES	128
+#define TCS4525_NVOLTAGES	127	/* Numbers of voltages */
+
+#define TCS_VSEL_NSEL_MASK	0x7f
+#define TCS_VSEL0_MODE		(1 << 7)
+#define TCS_VSEL1_MODE		(1 << 6)
+
+#define TCS_SLEW_SHIFT		3
+#define TCS_SLEW_MASK		(0x3 < 3)
 
 enum fan53555_vendor {
 	FAN53526_VENDOR_FAIRCHILD = 0,
 	FAN53555_VENDOR_FAIRCHILD,
 	FAN53555_VENDOR_SILERGY,
+	FAN53555_VENDOR_TCS,
 };
 
 enum {
@@ -106,6 +121,11 @@ struct fan53555_device_info {
 	unsigned int mode_mask;
 	/* Sleep voltage cache */
 	unsigned int sleep_vol_cache;
+	/* Slew rate */
+	unsigned int slew_reg;
+	unsigned int slew_mask;
+	unsigned int slew_shift;
+	unsigned int slew_rate;
 };
 
 static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
@@ -189,13 +209,37 @@ static const int slew_rates[] = {
 	  500,
 };
 
+static const int tcs_slew_rates[] = {
+	18700,
+	 9300,
+	 4600,
+	 2300,
+};
+
 static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
 {
 	struct fan53555_device_info *di = rdev_get_drvdata(rdev);
 	int regval = -1, i;
+	const int *slew_rate_t;
+	int slew_rate_n;
 
-	for (i = 0; i < ARRAY_SIZE(slew_rates); i++) {
-		if (ramp <= slew_rates[i])
+	switch (di->vendor) {
+	case FAN53526_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_SILERGY:
+		slew_rate_t = slew_rates;
+		slew_rate_n = ARRAY_SIZE(slew_rates);
+		break;
+	case FAN53555_VENDOR_TCS:
+		slew_rate_t = tcs_slew_rates;
+		slew_rate_n = ARRAY_SIZE(tcs_slew_rates);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < slew_rate_n; i++) {
+		if (ramp <= slew_rate_t[i])
 			regval = i;
 		else
 			break;
@@ -206,8 +250,8 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
 		return -EINVAL;
 	}
 
-	return regmap_update_bits(rdev->regmap, FAN53555_CONTROL,
-				  CTL_SLEW_MASK, regval << CTL_SLEW_SHIFT);
+	return regmap_update_bits(rdev->regmap, di->slew_reg,
+				  di->slew_mask, regval << di->slew_shift);
 }
 
 static const struct regulator_ops fan53555_regulator_ops = {
@@ -292,7 +336,9 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
 			"Chip ID %d not supported!\n", di->chip_id);
 		return -EINVAL;
 	}
-
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->slew_shift = CTL_SLEW_SHIFT;
 	di->vsel_count = FAN53555_NVOLTAGES;
 
 	return 0;
@@ -312,12 +358,29 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 			"Chip ID %d not supported!\n", di->chip_id);
 		return -EINVAL;
 	}
-
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_reg = FAN53555_CONTROL;
+	di->slew_mask = CTL_SLEW_MASK;
+	di->slew_shift = CTL_SLEW_SHIFT;
 	di->vsel_count = FAN53555_NVOLTAGES;
 
 	return 0;
 }
 
+static int fan53555_voltages_setup_tcs(struct fan53555_device_info *di)
+{
+	di->slew_reg = TCS4525_TIME;
+	di->slew_mask = TCS_SLEW_MASK;
+	di->slew_shift = TCS_SLEW_MASK;
+
+	/* Init voltage range and step */
+	di->vsel_min = 600000;
+	di->vsel_step = 6250;
+	di->vsel_count = TCS4525_NVOLTAGES;
+
+	return 0;
+}
+
 /* For 00,01,03,05 options:
  * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
  * For 04 option:
@@ -329,17 +392,41 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 	int ret = 0;
 
 	/* Setup voltage control register */
-	switch (pdata->sleep_vsel_id) {
-	case FAN53555_VSEL_ID_0:
-		di->sleep_reg = FAN53555_VSEL0;
-		di->vol_reg = FAN53555_VSEL1;
+	switch (di->vendor) {
+	case FAN53526_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_FAIRCHILD:
+	case FAN53555_VENDOR_SILERGY:
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->sleep_reg = FAN53555_VSEL0;
+			di->vol_reg = FAN53555_VSEL1;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->sleep_reg = FAN53555_VSEL1;
+			di->vol_reg = FAN53555_VSEL0;
+			break;
+		default:
+			dev_err(di->dev, "Invalid VSEL ID!\n");
+			return -EINVAL;
+		}
 		break;
-	case FAN53555_VSEL_ID_1:
-		di->sleep_reg = FAN53555_VSEL1;
-		di->vol_reg = FAN53555_VSEL0;
+	case FAN53555_VENDOR_TCS:
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->sleep_reg = TCS4525_VSEL0;
+			di->vol_reg = TCS4525_VSEL1;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->sleep_reg = TCS4525_VSEL1;
+			di->vol_reg = TCS4525_VSEL0;
+			break;
+		default:
+			dev_err(di->dev, "Invalid VSEL ID!\n");
+			return -EINVAL;
+		}
 		break;
 	default:
-		dev_err(di->dev, "Invalid VSEL ID!\n");
+		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
 		return -EINVAL;
 	}
 
@@ -362,6 +449,18 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 		di->mode_reg = di->vol_reg;
 		di->mode_mask = VSEL_MODE;
 		break;
+	case FAN53555_VENDOR_TCS:
+		di->mode_reg = TCS4525_COMMAND;
+
+		switch (pdata->sleep_vsel_id) {
+		case FAN53555_VSEL_ID_0:
+			di->mode_mask = TCS_VSEL1_MODE;
+			break;
+		case FAN53555_VSEL_ID_1:
+			di->mode_mask = TCS_VSEL0_MODE;
+			break;
+		}
+		break;
 	default:
 		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
 		return -EINVAL;
@@ -378,6 +477,9 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
 	case FAN53555_VENDOR_SILERGY:
 		ret = fan53555_voltages_setup_silergy(di);
 		break;
+	case FAN53555_VENDOR_TCS:
+		ret = fan53555_voltages_setup_tcs(di);
+		break;
 	default:
 		dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
 		return -EINVAL;
@@ -449,6 +551,9 @@ static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
 	}, {
 		.compatible = "silergy,syr828",
 		.data = (void *)FAN53555_VENDOR_SILERGY,
+	}, {
+		.compatible = "tcs,tcs4525",
+		.data = (void *)FAN53555_VENDOR_TCS
 	},
 	{ }
 };
@@ -554,6 +659,9 @@ static const struct i2c_device_id fan53555_id[] = {
 	}, {
 		.name = "syr828",
 		.driver_data = FAN53555_VENDOR_SILERGY
+	}, {
+		.name = "tcs4525",
+		.driver_data = FAN53555_VENDOR_TCS
 	},
 	{ },
 };
-- 
2.30.0

Re: [PATCH 1/3] dt-bindings: vendor-prefixes: Add Tang Cheng (TCS)

[Mark Brown]

On Wed, 21 Apr 2021 18:03:36 -0300, Ezequiel Garcia wrote:
> Shenzhen City Tang Cheng Technology (http://www.tctek.cn/)
> is a power management IC manufacturer.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/3] dt-bindings: vendor-prefixes: Add Tang Cheng (TCS)
      commit: 3007accc39776e0888f7692bd1cb639c51cc29c5
[2/3] dt-bindings: regulator: Add support for TCS4525
      commit: f80505fdff771c89c9350895e99140ffc824e564
[3/3] regulator: fan53555: Add TCS4525 DCDC support
      commit: 914df8faa7d6fdff7afa1fbde888a2bed8d72fa7

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark