[PATCH 00/20] net: ethernet: remove leading spaces before tabs

[PATCH 00/20] net: ethernet: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

        $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
        $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Hui Tang (20):
  net: 3com: remove leading spaces before tabs
  net: alteon: remove leading spaces before tabs
  net: amd: remove leading spaces before tabs
  net: apple: remove leading spaces before tabs
  net: broadcom: remove leading spaces before tabs
  net: chelsio: remove leading spaces before tabs
  net: dec: remove leading spaces before tabs
  net: dlink: remove leading spaces before tabs
  net: ibm: remove leading spaces before tabs
  net: marvell: remove leading spaces before tabs
  net: natsemi: remove leading spaces before tabs
  net: realtek: remove leading spaces before tabs
  net: seeq: remove leading spaces before tabs
  net: sis: remove leading spaces before tabs
  net: smsc: remove leading spaces before tabs
  net: sun: remove leading spaces before tabs
  net: fealnx: remove leading spaces before tabs
  net: xircom: remove leading spaces before tabs
  net: 8390: remove leading spaces before tabs
  net: fujitsu: remove leading spaces before tabs

 drivers/net/ethernet/3com/3c59x.c            |  2 +-
 drivers/net/ethernet/8390/axnet_cs.c         | 14 +++++-----
 drivers/net/ethernet/8390/pcnet_cs.c         |  2 +-
 drivers/net/ethernet/8390/smc-ultra.c        |  6 ++--
 drivers/net/ethernet/8390/stnic.c            |  2 +-
 drivers/net/ethernet/alteon/acenic.c         | 26 ++++++++---------
 drivers/net/ethernet/amd/amd8111e.c          |  4 +--
 drivers/net/ethernet/amd/amd8111e.h          |  6 ++--
 drivers/net/ethernet/amd/atarilance.c        |  2 +-
 drivers/net/ethernet/amd/declance.c          |  2 +-
 drivers/net/ethernet/amd/lance.c             |  4 +--
 drivers/net/ethernet/amd/ni65.c              | 12 ++++----
 drivers/net/ethernet/amd/nmclan_cs.c         | 12 ++++----
 drivers/net/ethernet/amd/sun3lance.c         | 12 ++++----
 drivers/net/ethernet/apple/bmac.c            | 30 ++++++++++----------
 drivers/net/ethernet/apple/mace.c            |  8 +++---
 drivers/net/ethernet/broadcom/b44.c          | 20 ++++++-------
 drivers/net/ethernet/broadcom/bnx2.c         |  6 ++--
 drivers/net/ethernet/chelsio/cxgb3/sge.c     |  2 +-
 drivers/net/ethernet/dec/tulip/de2104x.c     |  4 +--
 drivers/net/ethernet/dec/tulip/de4x5.c       |  6 ++--
 drivers/net/ethernet/dec/tulip/dmfe.c        | 18 ++++++------
 drivers/net/ethernet/dec/tulip/pnic2.c       |  4 +--
 drivers/net/ethernet/dec/tulip/uli526x.c     | 10 +++----
 drivers/net/ethernet/dec/tulip/winbond-840.c |  4 +--
 drivers/net/ethernet/dlink/sundance.c        | 12 ++++----
 drivers/net/ethernet/fealnx.c                |  2 +-
 drivers/net/ethernet/fujitsu/fmvj18x_cs.c    |  6 ++--
 drivers/net/ethernet/ibm/emac/emac.h         |  2 +-
 drivers/net/ethernet/marvell/skge.h          |  2 +-
 drivers/net/ethernet/marvell/sky2.c          | 30 ++++++++++----------
 drivers/net/ethernet/marvell/sky2.h          |  8 +++---
 drivers/net/ethernet/natsemi/natsemi.c       |  6 ++--
 drivers/net/ethernet/realtek/8139cp.c        |  6 ++--
 drivers/net/ethernet/realtek/8139too.c       |  6 ++--
 drivers/net/ethernet/realtek/atp.c           |  4 +--
 drivers/net/ethernet/seeq/ether3.c           | 10 +++----
 drivers/net/ethernet/sis/sis900.c            | 22 +++++++--------
 drivers/net/ethernet/smsc/smc9194.c          | 42 ++++++++++++++--------------
 drivers/net/ethernet/smsc/smc91x.c           | 14 +++++-----
 drivers/net/ethernet/sun/cassini.c           |  2 +-
 drivers/net/ethernet/sun/sungem.c            | 20 ++++++-------
 drivers/net/ethernet/sun/sunhme.c            |  6 ++--
 drivers/net/ethernet/xircom/xirc2ps_cs.c     |  2 +-
 44 files changed, 210 insertions(+), 210 deletions(-)

--
2.8.1

[PATCH 01/20] net: 3com: remove leading spaces before tabs

[Hui Tang]

There are a few leading space before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Steffen Klassert <klassert@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/3com/3c59x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 741c67e..7d7d3ff 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -1464,7 +1464,7 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
 	if (pdev) {
 		vp->pm_state_valid = 1;
 		pci_save_state(pdev);
- 		acpi_set_WOL(dev);
+		acpi_set_WOL(dev);
 	}
 	retval = register_netdev(dev);
 	if (retval == 0)
-- 
2.8.1

[PATCH 02/20] net: alteon: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/alteon/acenic.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/alteon/acenic.c b/drivers/net/ethernet/alteon/acenic.c
index 1a7e4df..9dc12b1 100644
--- a/drivers/net/ethernet/alteon/acenic.c
+++ b/drivers/net/ethernet/alteon/acenic.c
@@ -1883,16 +1883,16 @@ static u32 ace_handle_event(struct net_device *dev, u32 evtcsm, u32 evtprd)
 				}
 			}
 
- 			if (ACE_IS_TIGON_I(ap)) {
- 				struct cmd cmd;
- 				cmd.evt = C_SET_RX_JUMBO_PRD_IDX;
- 				cmd.code = 0;
- 				cmd.idx = 0;
- 				ace_issue_cmd(ap->regs, &cmd);
- 			} else {
- 				writel(0, &((ap->regs)->RxJumboPrd));
- 				wmb();
- 			}
+			if (ACE_IS_TIGON_I(ap)) {
+				struct cmd cmd;
+				cmd.evt = C_SET_RX_JUMBO_PRD_IDX;
+				cmd.code = 0;
+				cmd.idx = 0;
+				ace_issue_cmd(ap->regs, &cmd);
+			} else {
+				writel(0, &((ap->regs)->RxJumboPrd));
+				wmb();
+			}
 
 			ap->jumbo = 0;
 			ap->rx_jumbo_skbprd = 0;
@@ -2489,9 +2489,9 @@ static netdev_tx_t ace_start_xmit(struct sk_buff *skb,
 		}
 	}
 
- 	wmb();
- 	ap->tx_prd = idx;
- 	ace_set_txprd(regs, ap, idx);
+	wmb();
+	ap->tx_prd = idx;
+	ace_set_txprd(regs, ap, idx);
 
 	if (flagsize & BD_FLG_COAL_NOW) {
 		netif_stop_queue(dev);
-- 
2.8.1

[PATCH 03/20] net: amd: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/amd/amd8111e.c   |  4 ++--
 drivers/net/ethernet/amd/amd8111e.h   |  6 +++---
 drivers/net/ethernet/amd/atarilance.c |  2 +-
 drivers/net/ethernet/amd/declance.c   |  2 +-
 drivers/net/ethernet/amd/lance.c      |  4 ++--
 drivers/net/ethernet/amd/ni65.c       | 12 ++++++------
 drivers/net/ethernet/amd/nmclan_cs.c  | 12 ++++++------
 drivers/net/ethernet/amd/sun3lance.c  | 12 ++++++------
 8 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
index 4a1220c..9cac5aa 100644
--- a/drivers/net/ethernet/amd/amd8111e.c
+++ b/drivers/net/ethernet/amd/amd8111e.c
@@ -19,14 +19,14 @@ Module Name:
 
 Abstract:
 
- 	 AMD8111 based 10/100 Ethernet Controller Driver.
+	 AMD8111 based 10/100 Ethernet Controller Driver.
 
 Environment:
 
 	Kernel Mode
 
 Revision History:
- 	3.0.0
+	3.0.0
 	   Initial Revision.
 	3.0.1
 	 1. Dynamic interrupt coalescing.
diff --git a/drivers/net/ethernet/amd/amd8111e.h b/drivers/net/ethernet/amd/amd8111e.h
index 493f154..37da79d 100644
--- a/drivers/net/ethernet/amd/amd8111e.h
+++ b/drivers/net/ethernet/amd/amd8111e.h
@@ -10,14 +10,14 @@ Module Name:
 
 Abstract:
 
- 	 AMD8111 based 10/100 Ethernet Controller driver definitions.
+	 AMD8111 based 10/100 Ethernet Controller driver definitions.
 
 Environment:
 
 	Kernel Mode
 
 Revision History:
- 	3.0.0
+	3.0.0
 	   Initial Revision.
 	3.0.1
 */
@@ -692,7 +692,7 @@ enum coal_type{
 };
 
 enum coal_mode{
-       	RX_INTR_COAL,
+	RX_INTR_COAL,
 	TX_INTR_COAL,
 	DISABLE_COAL,
 	ENABLE_COAL,
diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
index c1eab91..36f54d13 100644
--- a/drivers/net/ethernet/amd/atarilance.c
+++ b/drivers/net/ethernet/amd/atarilance.c
@@ -706,7 +706,7 @@ static void lance_init_ring( struct net_device *dev )
 		CHECK_OFFSET(offset);
 		MEM->tx_head[i].base = offset;
 		MEM->tx_head[i].flag = TMD1_OWN_HOST;
- 		MEM->tx_head[i].base_hi = 0;
+		MEM->tx_head[i].base_hi = 0;
 		MEM->tx_head[i].length = 0;
 		MEM->tx_head[i].misc = 0;
 		offset += PKT_BUF_SZ;
diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c
index 7282ce5..493b0ce 100644
--- a/drivers/net/ethernet/amd/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -937,7 +937,7 @@ static netdev_tx_t lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev_kfree_skb(skb);
 
- 	return NETDEV_TX_OK;
+	return NETDEV_TX_OK;
 }
 
 static void lance_load_multicast(struct net_device *dev)
diff --git a/drivers/net/ethernet/amd/lance.c b/drivers/net/ethernet/amd/lance.c
index aff4424..2178e6b 100644
--- a/drivers/net/ethernet/amd/lance.c
+++ b/drivers/net/ethernet/amd/lance.c
@@ -780,7 +780,7 @@ lance_open(struct net_device *dev)
 		outw(0x0002, ioaddr+LANCE_ADDR);
 		/* Only touch autoselect bit. */
 		outw(inw(ioaddr+LANCE_BUS_IF) | 0x0002, ioaddr+LANCE_BUS_IF);
- 	}
+	}
 
 	if (lance_debug > 1)
 		printk("%s: lance_open() irq %d dma %d tx/rx rings %#x/%#x init %#x.\n",
@@ -812,7 +812,7 @@ lance_open(struct net_device *dev)
 	 * We used to clear the InitDone bit, 0x0100, here but Mark Stockton
 	 * reports that doing so triggers a bug in the '974.
 	 */
- 	outw(0x0042, ioaddr+LANCE_DATA);
+	outw(0x0042, ioaddr+LANCE_DATA);
 
 	if (lance_debug > 2)
 		printk("%s: LANCE open after %d ticks, init block %#x csr0 %4.4x.\n",
diff --git a/drivers/net/ethernet/amd/ni65.c b/drivers/net/ethernet/amd/ni65.c
index c38edf6..5c1cfb0 100644
--- a/drivers/net/ethernet/amd/ni65.c
+++ b/drivers/net/ethernet/amd/ni65.c
@@ -193,7 +193,7 @@ static struct card {
 		.vendor_id   = ni_vendor,
 		.cardname    = "ni6510",
 		.config	     = 0x1,
-       	},
+	},
 	{
 		.id0	     = NI65_EB_ID0,
 		.id1	     = NI65_EB_ID1,
@@ -204,7 +204,7 @@ static struct card {
 		.vendor_id   = ni_vendor,
 		.cardname    = "ni6510 EtherBlaster",
 		.config	     = 0x2,
-       	},
+	},
 	{
 		.id0	     = NE2100_ID0,
 		.id1	     = NE2100_ID1,
@@ -1232,15 +1232,15 @@ MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)");
 
 int __init init_module(void)
 {
- 	dev_ni65 = ni65_probe(-1);
+	dev_ni65 = ni65_probe(-1);
 	return PTR_ERR_OR_ZERO(dev_ni65);
 }
 
 void __exit cleanup_module(void)
 {
- 	unregister_netdev(dev_ni65);
- 	cleanup_card(dev_ni65);
- 	free_netdev(dev_ni65);
+	unregister_netdev(dev_ni65);
+	cleanup_card(dev_ni65);
+	free_netdev(dev_ni65);
 }
 #endif /* MODULE */
 
diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c
index 11c0b13..4019cab 100644
--- a/drivers/net/ethernet/amd/nmclan_cs.c
+++ b/drivers/net/ethernet/amd/nmclan_cs.c
@@ -541,7 +541,7 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
     if(++ct > 500)
     {
 	pr_err("reset failed, card removed?\n");
-    	return -1;
+	return -1;
     }
     udelay(1);
   }
@@ -585,11 +585,11 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
   ct = 0;
   while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
   {
-  	if(++ ct > 500)
-  	{
+	if(++ ct > 500)
+	{
 		pr_err("ADDRCHG timeout, card removed?\n");
-  		return -1;
-  	}
+		return -1;
+	}
   }
   /* Set PADR register */
   for (i = 0; i < ETH_ALEN; i++)
@@ -655,7 +655,7 @@ static int nmclan_config(struct pcmcia_device *link)
   }
 
   if(mace_init(lp, ioaddr, dev->dev_addr) == -1)
-  	goto failed;
+	goto failed;
 
   /* The if_port symbol can be set when the module is loaded */
   if (if_port <= 2)
diff --git a/drivers/net/ethernet/amd/sun3lance.c b/drivers/net/ethernet/amd/sun3lance.c
index 00ae108..f8d7a93 100644
--- a/drivers/net/ethernet/amd/sun3lance.c
+++ b/drivers/net/ethernet/amd/sun3lance.c
@@ -150,7 +150,7 @@ struct lance_memory {
 struct lance_private {
 	volatile unsigned short	*iobase;
 	struct lance_memory	*mem;
-     	int new_rx, new_tx;	/* The next free ring entry */
+	int new_rx, new_tx;	/* The next free ring entry */
 	int old_tx, old_rx;     /* ring entry to be processed */
 /* These two must be longs for set_bit() */
 	long	    tx_full;
@@ -465,7 +465,7 @@ static void lance_init_ring( struct net_device *dev )
 	for( i = 0; i < TX_RING_SIZE; i++ ) {
 		MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]);
 		MEM->tx_head[i].flag = 0;
- 		MEM->tx_head[i].base_hi =
+		MEM->tx_head[i].base_hi =
 			(dvma_vtob(MEM->tx_data[i])) >>16;
 		MEM->tx_head[i].length = 0;
 		MEM->tx_head[i].misc = 0;
@@ -581,8 +581,8 @@ lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	AREG = CSR0;
-  	DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
-  				  dev->name, DREG ));
+	DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
+				  dev->name, DREG ));
 
 #ifdef CONFIG_SUN3X
 	/* this weirdness doesn't appear on sun3... */
@@ -636,8 +636,8 @@ lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Trigger an immediate send poll. */
 	REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT;
 	AREG = CSR0;
-  	DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
-  				  dev->name, DREG ));
+	DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
+				  dev->name, DREG ));
 	dev_kfree_skb(skb);
 
 	lp->lock = 0;
-- 
2.8.1

[PATCH 04/20] net: apple: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/apple/bmac.c | 30 +++++++++++++++---------------
 drivers/net/ethernet/apple/mace.c |  8 ++++----
 2 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c
index 1e4e402..a989d2d 100644
--- a/drivers/net/ethernet/apple/bmac.c
+++ b/drivers/net/ethernet/apple/bmac.c
@@ -477,26 +477,26 @@ static int bmac_suspend(struct macio_dev *mdev, pm_message_t state)
 		config = bmread(dev, RXCFG);
 		bmwrite(dev, RXCFG, (config & ~RxMACEnable));
 		config = bmread(dev, TXCFG);
-       		bmwrite(dev, TXCFG, (config & ~TxMACEnable));
+		bmwrite(dev, TXCFG, (config & ~TxMACEnable));
 		bmwrite(dev, INTDISABLE, DisableAll); /* disable all intrs */
-       		/* disable rx and tx dma */
+		/* disable rx and tx dma */
 		rd->control = cpu_to_le32(DBDMA_CLEAR(RUN|PAUSE|FLUSH|WAKE));	/* clear run bit */
 		td->control = cpu_to_le32(DBDMA_CLEAR(RUN|PAUSE|FLUSH|WAKE));	/* clear run bit */
-       		/* free some skb's */
-       		for (i=0; i<N_RX_RING; i++) {
-       			if (bp->rx_bufs[i] != NULL) {
-       				dev_kfree_skb(bp->rx_bufs[i]);
-       				bp->rx_bufs[i] = NULL;
-       			}
-       		}
-       		for (i = 0; i<N_TX_RING; i++) {
+		/* free some skb's */
+		for (i=0; i<N_RX_RING; i++) {
+			if (bp->rx_bufs[i] != NULL) {
+				dev_kfree_skb(bp->rx_bufs[i]);
+				bp->rx_bufs[i] = NULL;
+			}
+		}
+		for (i = 0; i<N_TX_RING; i++) {
 			if (bp->tx_bufs[i] != NULL) {
 		       		dev_kfree_skb(bp->tx_bufs[i]);
 	       			bp->tx_bufs[i] = NULL;
 		       	}
 		}
 	}
-       	pmac_call_feature(PMAC_FTR_BMAC_ENABLE, macio_get_of_node(bp->mdev), 0, 0);
+	pmac_call_feature(PMAC_FTR_BMAC_ENABLE, macio_get_of_node(bp->mdev), 0, 0);
 	return 0;
 }
 
@@ -510,9 +510,9 @@ static int bmac_resume(struct macio_dev *mdev)
 		bmac_reset_and_enable(dev);
 
 	enable_irq(dev->irq);
-       	enable_irq(bp->tx_dma_intr);
-       	enable_irq(bp->rx_dma_intr);
-       	netif_device_attach(dev);
+	enable_irq(bp->tx_dma_intr);
+	enable_irq(bp->rx_dma_intr);
+	netif_device_attach(dev);
 
 	return 0;
 }
@@ -1599,7 +1599,7 @@ static int bmac_remove(struct macio_dev *mdev)
 
 	unregister_netdev(dev);
 
-       	free_irq(dev->irq, dev);
+	free_irq(dev->irq, dev);
 	free_irq(bp->tx_dma_intr, dev);
 	free_irq(bp->rx_dma_intr, dev);
 
diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c
index 9e5006e..4b80e3a 100644
--- a/drivers/net/ethernet/apple/mace.c
+++ b/drivers/net/ethernet/apple/mace.c
@@ -364,9 +364,9 @@ static void mace_reset(struct net_device *dev)
 	out_8(&mb->iac, 0);
 
     if (mp->port_aaui)
-    	out_8(&mb->plscc, PORTSEL_AUI + ENPLSIO);
+	out_8(&mb->plscc, PORTSEL_AUI + ENPLSIO);
     else
-    	out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO);
+	out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO);
 }
 
 static void __mace_set_address(struct net_device *dev, void *addr)
@@ -378,9 +378,9 @@ static void __mace_set_address(struct net_device *dev, void *addr)
 
     /* load up the hardware address */
     if (mp->chipid == BROKEN_ADDRCHG_REV)
-    	out_8(&mb->iac, PHYADDR);
+	out_8(&mb->iac, PHYADDR);
     else {
-    	out_8(&mb->iac, ADDRCHG | PHYADDR);
+	out_8(&mb->iac, ADDRCHG | PHYADDR);
 	while ((in_8(&mb->iac) & ADDRCHG) != 0)
 	    ;
     }
-- 
2.8.1

[PATCH 05/20] net: broadcom: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/broadcom/b44.c  | 20 ++++++++++----------
 drivers/net/ethernet/broadcom/bnx2.c |  6 +++---
 2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index b455b60..ad2655e 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -1556,8 +1556,8 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
 	plen0 = b44_magic_pattern(bp->dev->dev_addr, pwol_pattern, pwol_mask,
 				  B44_ETHIPV4UDP_HLEN);
 
-   	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE, B44_PATTERN_BASE);
-   	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE, B44_PMASK_BASE);
+	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE, B44_PATTERN_BASE);
+	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE, B44_PMASK_BASE);
 
 	/* Raw ethernet II magic packet pattern - pattern 1 */
 	memset(pwol_pattern, 0, B44_PATTERN_SIZE);
@@ -1565,9 +1565,9 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
 	plen1 = b44_magic_pattern(bp->dev->dev_addr, pwol_pattern, pwol_mask,
 				  ETH_HLEN);
 
-   	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
+	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
 		       B44_PATTERN_BASE + B44_PATTERN_SIZE);
-  	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
+	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
 		       B44_PMASK_BASE + B44_PMASK_SIZE);
 
 	/* Ipv6 magic packet pattern - pattern 2 */
@@ -1576,9 +1576,9 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
 	plen2 = b44_magic_pattern(bp->dev->dev_addr, pwol_pattern, pwol_mask,
 				  B44_ETHIPV6UDP_HLEN);
 
-   	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
+	bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
 		       B44_PATTERN_BASE + B44_PATTERN_SIZE + B44_PATTERN_SIZE);
-  	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
+	bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
 		       B44_PMASK_BASE + B44_PMASK_SIZE + B44_PMASK_SIZE);
 
 	kfree(pwol_pattern);
@@ -1631,9 +1631,9 @@ static void b44_setup_wol(struct b44 *bp)
 		val = br32(bp, B44_DEVCTRL);
 		bw32(bp, B44_DEVCTRL, val | DEVCTRL_MPM | DEVCTRL_PFE);
 
- 	} else {
- 		b44_setup_pseudo_magicp(bp);
- 	}
+	} else {
+		b44_setup_pseudo_magicp(bp);
+	}
 	b44_setup_wol_pci(bp);
 }
 
@@ -1757,7 +1757,7 @@ static void __b44_set_rx_mode(struct net_device *dev)
 			__b44_cam_write(bp, zero, i);
 
 		bw32(bp, B44_RXCONFIG, val);
-        	val = br32(bp, B44_CAM_CTRL);
+		val = br32(bp, B44_CAM_CTRL);
 	        bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
 	}
 }
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index c098609..2c5f36b 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -572,7 +572,7 @@ bnx2_write_phy(struct bnx2 *bp, u32 reg, u32 val)
 	}
 
 	if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)
-        	ret = -EBUSY;
+		ret = -EBUSY;
 	else
 		ret = 0;
 
@@ -3599,7 +3599,7 @@ bnx2_set_rx_mode(struct net_device *dev)
 		for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) {
 			BNX2_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4),
 				0xffffffff);
-        	}
+		}
 		sort_mode |= BNX2_RPM_SORT_USER0_MC_EN;
 	}
 	else {
@@ -4674,7 +4674,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 
 				if (addr == page_end-4) {
 					cmd_flags = BNX2_NVM_COMMAND_LAST;
-                		}
+				}
 				rc = bnx2_nvram_write_dword(bp, addr,
 					&flash_buffer[i], cmd_flags);
 
-- 
2.8.1

[PATCH 06/20] net: chelsio: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/chelsio/cxgb3/sge.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index cec7308..11d3b62 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -3371,7 +3371,7 @@ void t3_sge_prep(struct adapter *adap, struct sge_params *p)
 		q->coalesce_usecs = 5;
 		q->rspq_size = 1024;
 		q->fl_size = 1024;
- 		q->jumbo_size = 512;
+		q->jumbo_size = 512;
 		q->txq_size[TXQ_ETH] = 1024;
 		q->txq_size[TXQ_OFLD] = 1024;
 		q->txq_size[TXQ_CTRL] = 256;
-- 
2.8.1

[PATCH 07/20] net: dec: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/dec/tulip/de2104x.c     |  4 ++--
 drivers/net/ethernet/dec/tulip/de4x5.c       |  6 +++---
 drivers/net/ethernet/dec/tulip/dmfe.c        | 18 +++++++++---------
 drivers/net/ethernet/dec/tulip/pnic2.c       |  4 ++--
 drivers/net/ethernet/dec/tulip/uli526x.c     | 10 +++++-----
 drivers/net/ethernet/dec/tulip/winbond-840.c |  4 ++--
 6 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
index b018195..117c26f 100644
--- a/drivers/net/ethernet/dec/tulip/de2104x.c
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c
@@ -832,8 +832,8 @@ static struct net_device_stats *de_get_stats(struct net_device *dev)
 
 	/* The chip only need report frame silently dropped. */
 	spin_lock_irq(&de->lock);
- 	if (netif_running(dev) && netif_device_present(dev))
- 		__de_get_stats(de);
+	if (netif_running(dev) && netif_device_present(dev))
+		__de_get_stats(de);
 	spin_unlock_irq(&de->lock);
 
 	return &dev->stats;
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index 683e328..b125d7f 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -396,7 +396,7 @@
 			   <earl@exis.net>.
 			  Updated the PCI interface to conform with the latest
 			   version. I hope nothing is broken...
-          		  Add TX done interrupt modification from suggestion
+			  Add TX done interrupt modification from suggestion
 			   by <Austin.Donnelly@cl.cam.ac.uk>.
 			  Fix is_anc_capable() bug reported by
 			   <Austin.Donnelly@cl.cam.ac.uk>.
@@ -1499,7 +1499,7 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
 	    spin_lock_irqsave(&lp->lock, flags);
 	    netif_stop_queue(dev);
 	    load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb);
- 	    lp->stats.tx_bytes += skb->len;
+	    lp->stats.tx_bytes += skb->len;
 	    outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */
 
 	    lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
@@ -1651,7 +1651,7 @@ de4x5_rx(struct net_device *dev)
 
 		    /* Update stats */
 		    lp->stats.rx_packets++;
- 		    lp->stats.rx_bytes += pkt_len;
+		    lp->stats.rx_bytes += pkt_len;
 		}
 	    }
 
diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index 87a27fe..c763b69 100644
--- a/drivers/net/ethernet/dec/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -518,7 +518,7 @@ static void dmfe_remove_one(struct pci_dev *pdev)
 
 	DMFE_DBUG(0, "dmfe_remove_one()", 0);
 
- 	if (dev) {
+	if (dev) {
 
 		unregister_netdev(dev);
 		pci_iounmap(db->pdev, db->ioaddr);
@@ -567,10 +567,10 @@ static int dmfe_open(struct net_device *dev)
 	/* CR6 operation mode decision */
 	if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
 		(db->chip_revision >= 0x30) ) {
-    		db->cr6_data |= DMFE_TXTH_256;
+		db->cr6_data |= DMFE_TXTH_256;
 		db->cr0_data = CR0_DEFAULT;
 		db->dm910x_chk_mode=4;		/* Enter the normal mode */
- 	} else {
+	} else {
 		db->cr6_data |= CR6_SFT;	/* Store & Forward mode */
 		db->cr0_data = 0;
 		db->dm910x_chk_mode = 1;	/* Enter the check mode */
@@ -903,7 +903,7 @@ static void dmfe_free_tx_pkt(struct net_device *dev, struct dmfe_board_info *db)
 			}
 		}
 
-    		txptr = txptr->next_tx_desc;
+		txptr = txptr->next_tx_desc;
 	}/* End of while */
 
 	/* Update TX remove pointer to next */
@@ -1121,7 +1121,7 @@ static void dmfe_timer(struct timer_list *t)
 	void __iomem *ioaddr = db->ioaddr;
 	u32 tmp_cr8;
 	unsigned char tmp_cr12;
- 	unsigned long flags;
+	unsigned long flags;
 
 	int link_ok, link_ok_phy;
 
@@ -1217,7 +1217,7 @@ static void dmfe_timer(struct timer_list *t)
 	if (link_ok_phy != link_ok) {
 		DMFE_DBUG (0, "PHY and chip report different link status", 0);
 		link_ok = link_ok | link_ok_phy;
- 	}
+	}
 
 	if ( !link_ok && netif_carrier_ok(dev)) {
 		/* Link Failed */
@@ -1699,14 +1699,14 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db)
 		if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61;
 	}
 
-  	/* Write new capability to Phyxcer Reg4 */
+	/* Write new capability to Phyxcer Reg4 */
 	if ( !(phy_reg & 0x01e0)) {
 		phy_reg|=db->PHY_reg4;
 		db->media_mode|=DMFE_AUTO;
 	}
 	dmfe_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
 
- 	/* Restart Auto-Negotiation */
+	/* Restart Auto-Negotiation */
 	if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
 		dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id);
 	if ( !db->chip_type )
@@ -1754,7 +1754,7 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
 			}
 			dmfe_phy_write(db->ioaddr,
 				       db->phy_addr, 0, phy_reg, db->chip_id);
-       			if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
+			if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
 				mdelay(20);
 			dmfe_phy_write(db->ioaddr,
 				       db->phy_addr, 0, phy_reg, db->chip_id);
diff --git a/drivers/net/ethernet/dec/tulip/pnic2.c b/drivers/net/ethernet/dec/tulip/pnic2.c
index 412adaa..72a0915 100644
--- a/drivers/net/ethernet/dec/tulip/pnic2.c
+++ b/drivers/net/ethernet/dec/tulip/pnic2.c
@@ -351,7 +351,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 			del_timer_sync(&tp->timer);
 			pnic2_start_nway(dev);
 			tp->timer.expires = RUN_AT(3*HZ);
-       			add_timer(&tp->timer);
+			add_timer(&tp->timer);
                 }
 
                 return;
@@ -375,7 +375,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 			del_timer_sync(&tp->timer);
 			pnic2_start_nway(dev);
 			tp->timer.expires = RUN_AT(3*HZ);
-       			add_timer(&tp->timer);
+			add_timer(&tp->timer);
                 }
 
                 return;
diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
index 13e73ed..d67ef7d 100644
--- a/drivers/net/ethernet/dec/tulip/uli526x.c
+++ b/drivers/net/ethernet/dec/tulip/uli526x.c
@@ -780,7 +780,7 @@ static void uli526x_free_tx_pkt(struct net_device *dev,
 			}
 		}
 
-    		txptr = txptr->next_tx_desc;
+		txptr = txptr->next_tx_desc;
 	}/* End of while */
 
 	/* Update TX remove pointer to next */
@@ -1015,7 +1015,7 @@ static void uli526x_timer(struct timer_list *t)
 	struct net_device *dev = pci_get_drvdata(db->pdev);
 	struct uli_phy_ops *phy = &db->phy;
 	void __iomem *ioaddr = db->ioaddr;
- 	unsigned long flags;
+	unsigned long flags;
 	u8 tmp_cr12 = 0;
 	u32 tmp_cr8;
 
@@ -1535,14 +1535,14 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
 
 	}
 
-  	/* Write new capability to Phyxcer Reg4 */
+	/* Write new capability to Phyxcer Reg4 */
 	if ( !(phy_reg & 0x01e0)) {
 		phy_reg|=db->PHY_reg4;
 		db->media_mode|=ULI526X_AUTO;
 	}
 	phy->write(db, db->phy_addr, 4, phy_reg);
 
- 	/* Restart Auto-Negotiation */
+	/* Restart Auto-Negotiation */
 	phy->write(db, db->phy_addr, 0, 0x1200);
 	udelay(50);
 }
@@ -1550,7 +1550,7 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
 
 /*
  *	Process op-mode
- 	AUTO mode : PHY controller in Auto-negotiation Mode
+	AUTO mode : PHY controller in Auto-negotiation Mode
  *	Force mode: PHY controller in force mode with HUB
  *			N-way force capability with SWITCH
  */
diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
index 514df17..f6ff1f7 100644
--- a/drivers/net/ethernet/dec/tulip/winbond-840.c
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -36,7 +36,7 @@
 		power management.
 		support for big endian descriptors
 			Copyright (C) 2001 Manfred Spraul
-  	* ethtool support (jgarzik)
+	* ethtool support (jgarzik)
 	* Replace some MII-related magic numbers with constants (jgarzik)
 
 	TODO:
@@ -1479,7 +1479,7 @@ static int netdev_close(struct net_device *dev)
 			   np->cur_rx, np->dirty_rx);
 	}
 
- 	/* Stop the chip's Tx and Rx processes. */
+	/* Stop the chip's Tx and Rx processes. */
 	spin_lock_irq(&np->lock);
 	netif_device_detach(dev);
 	update_csr6(dev, 0);
-- 
2.8.1

[PATCH 08/20] net: dlink: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/dlink/sundance.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/dlink/sundance.c b/drivers/net/ethernet/dlink/sundance.c
index ce61f79f..ee0ca71 100644
--- a/drivers/net/ethernet/dlink/sundance.c
+++ b/drivers/net/ethernet/dlink/sundance.c
@@ -1847,20 +1847,20 @@ static int netdev_close(struct net_device *dev)
 	/* Stop the chip's Tx and Rx processes. */
 	iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
 
-    	for (i = 2000; i > 0; i--) {
- 		if ((ioread32(ioaddr + DMACtrl) & 0xc000) == 0)
+	for (i = 2000; i > 0; i--) {
+		if ((ioread32(ioaddr + DMACtrl) & 0xc000) == 0)
 			break;
 		mdelay(1);
-    	}
+	}
 
-    	iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset,
+	iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset,
 			ioaddr + ASIC_HI_WORD(ASICCtrl));
 
-    	for (i = 2000; i > 0; i--) {
+	for (i = 2000; i > 0; i--) {
 		if ((ioread16(ioaddr + ASIC_HI_WORD(ASICCtrl)) & ResetBusy) == 0)
 			break;
 		mdelay(1);
-    	}
+	}
 
 #ifdef __i386__
 	if (netif_msg_hw(np)) {
-- 
2.8.1

[PATCH 09/20] net: ibm: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/ibm/emac/emac.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ibm/emac/emac.h b/drivers/net/ethernet/ibm/emac/emac.h
index aa9f651..09d3ac3 100644
--- a/drivers/net/ethernet/ibm/emac/emac.h
+++ b/drivers/net/ethernet/ibm/emac/emac.h
@@ -77,7 +77,7 @@ struct emac_regs {
 		struct {
 			u32 rsvd1;
 			u32 revid;
- 			u32 rsvd2[2];
+			u32 rsvd2[2];
 			u32 iaht1;	/* Reset, R     */
 			u32 iaht2;	/* Reset, R     */
 			u32 iaht3;	/* Reset, R     */
-- 
2.8.1

Re: [PATCH 09/20] net: ibm: remove leading spaces before tabs

[Lijun Pan]

> On May 19, 2021, at 12:30 AM, Hui Tang <tanghui20@huawei.com> wrote:
> 
> There are a few leading spaces before tabs and remove it by running the
> following commard:
> 
> 	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
> 	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
> Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
> Signed-off-by: Hui Tang <tanghui20@huawei.com>
> —

Acked-by: Lijun Pan <lijunp213@gmail.com>

[PATCH 10/20] net: marvell: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/marvell/skge.h |  2 +-
 drivers/net/ethernet/marvell/sky2.c | 30 +++++++++++++++---------------
 drivers/net/ethernet/marvell/sky2.h |  8 ++++----
 3 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/marvell/skge.h b/drivers/net/ethernet/marvell/skge.h
index 6928abc..f722173 100644
--- a/drivers/net/ethernet/marvell/skge.h
+++ b/drivers/net/ethernet/marvell/skge.h
@@ -263,7 +263,7 @@ enum {
 	CHIP_ID_YUKON_LP   = 0xb2, /* Chip ID for YUKON-LP */
 	CHIP_ID_YUKON_XL   = 0xb3, /* Chip ID for YUKON-2 XL */
 	CHIP_ID_YUKON_EC   = 0xb6, /* Chip ID for YUKON-2 EC */
- 	CHIP_ID_YUKON_FE   = 0xb7, /* Chip ID for YUKON-2 FE */
+	CHIP_ID_YUKON_FE   = 0xb7, /* Chip ID for YUKON-2 FE */
 
 	CHIP_REV_YU_LITE_A1  = 3,	/* Chip Rev. for YUKON-Lite A1,A2 */
 	CHIP_REV_YU_LITE_A3  = 7,	/* Chip Rev. for YUKON-Lite A3 */
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 222c323..324c280 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -471,7 +471,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 			adv |= fiber_fc_adv[sky2->flow_mode];
 	} else {
 		reg |= GM_GPCR_AU_FCT_DIS;
- 		reg |= gm_fc_disable[sky2->flow_mode];
+		reg |= gm_fc_disable[sky2->flow_mode];
 
 		/* Forward pause packets to GMAC? */
 		if (sky2->flow_mode & FC_RX)
@@ -1656,16 +1656,16 @@ static void sky2_hw_up(struct sky2_port *sky2)
 	tx_init(sky2);
 
 	/*
- 	 * On dual port PCI-X card, there is an problem where status
+	 * On dual port PCI-X card, there is an problem where status
 	 * can be received out of order due to split transactions
 	 */
 	if (otherdev && netif_running(otherdev) &&
- 	    (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
- 		u16 cmd;
+	    (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
+		u16 cmd;
 
 		cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
- 		cmd &= ~PCI_X_CMD_MAX_SPLIT;
- 		sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+		cmd &= ~PCI_X_CMD_MAX_SPLIT;
+		sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
 	}
 
 	sky2_mac_init(hw, port);
@@ -1836,8 +1836,8 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
 	u16 mss;
 	u8 ctrl;
 
- 	if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
-  		return NETDEV_TX_BUSY;
+	if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
+		return NETDEV_TX_BUSY;
 
 	len = skb_headlen(skb);
 	mapping = dma_map_single(&hw->pdev->dev, skb->data, len,
@@ -1866,9 +1866,9 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
 		if (!(hw->flags & SKY2_HW_NEW_LE))
 			mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
 
-  		if (mss != sky2->tx_last_mss) {
+		if (mss != sky2->tx_last_mss) {
 			le = get_tx_le(sky2, &slot);
-  			le->addr = cpu_to_le32(mss);
+			le->addr = cpu_to_le32(mss);
 
 			if (hw->flags & SKY2_HW_NEW_LE)
 				le->opcode = OP_MSS | HW_OWNER;
@@ -1895,8 +1895,8 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
 	/* Handle TCP checksum offload */
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		/* On Yukon EX (some versions) encoding change. */
- 		if (hw->flags & SKY2_HW_AUTO_TX_SUM)
- 			ctrl |= CALSUM;	/* auto checksum */
+		if (hw->flags & SKY2_HW_AUTO_TX_SUM)
+			ctrl |= CALSUM;	/* auto checksum */
 		else {
 			const unsigned offset = skb_transport_offset(skb);
 			u32 tcpsum;
@@ -2557,7 +2557,7 @@ static struct sk_buff *receive_new(struct sky2_port *sky2,
 static struct sk_buff *sky2_receive(struct net_device *dev,
 				    u16 length, u32 status)
 {
- 	struct sky2_port *sky2 = netdev_priv(dev);
+	struct sky2_port *sky2 = netdev_priv(dev);
 	struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
 	struct sk_buff *skb = NULL;
 	u16 count = (status & GMR_FS_LEN) >> 16;
@@ -5063,11 +5063,11 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!disable_msi && pci_enable_msi(pdev) == 0) {
 		err = sky2_test_msi(hw);
 		if (err) {
- 			pci_disable_msi(pdev);
+			pci_disable_msi(pdev);
 			if (err != -EOPNOTSUPP)
 				goto err_out_free_netdev;
 		}
- 	}
+	}
 
 	netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
 
diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h
index b2dddd8..ddec162 100644
--- a/drivers/net/ethernet/marvell/sky2.h
+++ b/drivers/net/ethernet/marvell/sky2.h
@@ -538,8 +538,8 @@ enum {
 	CHIP_ID_YUKON_EC_U = 0xb4, /* YUKON-2 EC Ultra */
 	CHIP_ID_YUKON_EX   = 0xb5, /* YUKON-2 Extreme */
 	CHIP_ID_YUKON_EC   = 0xb6, /* YUKON-2 EC */
- 	CHIP_ID_YUKON_FE   = 0xb7, /* YUKON-2 FE */
- 	CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */
+	CHIP_ID_YUKON_FE   = 0xb7, /* YUKON-2 FE */
+	CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */
 	CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
 	CHIP_ID_YUKON_UL_2 = 0xba, /* YUKON-2 Ultra 2 */
 	CHIP_ID_YUKON_OPT  = 0xbc, /* YUKON-2 Optima */
@@ -2262,8 +2262,8 @@ struct sky2_port {
 #define SKY2_FLAG_AUTO_SPEED		0x0002
 #define SKY2_FLAG_AUTO_PAUSE		0x0004
 
- 	enum flow_control    flow_mode;
- 	enum flow_control    flow_status;
+	enum flow_control    flow_mode;
+	enum flow_control    flow_status;
 
 #ifdef CONFIG_SKY2_DEBUG
 	struct dentry	     *debugfs;
-- 
2.8.1

[PATCH 11/20] net: natsemi: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/natsemi/natsemi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c
index b81e148..51b4b25 100644
--- a/drivers/net/ethernet/natsemi/natsemi.c
+++ b/drivers/net/ethernet/natsemi/natsemi.c
@@ -969,7 +969,7 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return 0;
 
  err_create_file:
- 	unregister_netdev(dev);
+	unregister_netdev(dev);
 
  err_register_netdev:
 	iounmap(ioaddr);
@@ -3103,14 +3103,14 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	case SIOCSMIIREG:		/* Write MII PHY register. */
 		if (dev->if_port == PORT_TP) {
 			if ((data->phy_id & 0x1f) == np->phy_addr_external) {
- 				if ((data->reg_num & 0x1f) == MII_ADVERTISE)
+				if ((data->reg_num & 0x1f) == MII_ADVERTISE)
 					np->advertising = data->val_in;
 				mdio_write(dev, data->reg_num & 0x1f,
 							data->val_in);
 			}
 		} else {
 			if ((data->phy_id & 0x1f) == np->phy_addr_external) {
- 				if ((data->reg_num & 0x1f) == MII_ADVERTISE)
+				if ((data->reg_num & 0x1f) == MII_ADVERTISE)
 					np->advertising = data->val_in;
 			}
 			move_int_phy(dev, data->phy_id & 0x1f);
-- 
2.8.1

[PATCH 12/20] net: realtek: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/realtek/8139cp.c  | 6 +++---
 drivers/net/ethernet/realtek/8139too.c | 6 +++---
 drivers/net/ethernet/realtek/atp.c     | 4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 4e44313..9677e25 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -6,7 +6,7 @@
 	Copyright (C) 2000, 2001 David S. Miller (davem@redhat.com) [sungem.c]
 	Copyright 2001 Manfred Spraul				    [natsemi.c]
 	Copyright 1999-2001 by Donald Becker.			    [natsemi.c]
-       	Written 1997-2001 by Donald Becker.			    [8139too.c]
+	Written 1997-2001 by Donald Becker.			    [8139too.c]
 	Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>. [acenic.c]
 
 	This software may be used and distributed according to the terms of
@@ -947,8 +947,8 @@ static struct net_device_stats *cp_get_stats(struct net_device *dev)
 
 	/* The chip only need report frame silently dropped. */
 	spin_lock_irqsave(&cp->lock, flags);
- 	if (netif_running(dev) && netif_device_present(dev))
- 		__cp_get_stats(cp);
+	if (netif_running(dev) && netif_device_present(dev))
+		__cp_get_stats(cp);
 	spin_unlock_irqrestore(&cp->lock, flags);
 
 	return &dev->stats;
diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index 1e5a453..f0608f0 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -11,7 +11,7 @@
 
 	-----<snip>-----
 
-        	Written 1997-2001 by Donald Becker.
+		Written 1997-2001 by Donald Becker.
 		This software may be used and distributed according to the
 		terms of the GNU General Public License (GPL), incorporated
 		herein by reference.  Drivers based on or derived from this
@@ -548,8 +548,8 @@ static const struct {
 
 	{ "RTL-8100",
 	  HW_REVID(1, 1, 1, 1, 0, 1, 0),
- 	  HasLWake,
- 	},
+	  HasLWake,
+	},
 
 	{ "RTL-8100B/8139D",
 	  HW_REVID(1, 1, 1, 0, 1, 0, 1),
diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c
index 9e3b35c..b6c849b 100644
--- a/drivers/net/ethernet/realtek/atp.c
+++ b/drivers/net/ethernet/realtek/atp.c
@@ -497,8 +497,8 @@ static void write_packet(long ioaddr, int length, unsigned char *packet, int pad
 {
     if (length & 1)
     {
-    	length++;
-    	pad_len++;
+	length++;
+	pad_len++;
     }
 
     outb(EOC+MAR, ioaddr + PAR_DATA);
-- 
2.8.1

[PATCH 13/20] net: seeq: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/seeq/ether3.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c
index 65c9883..16a4cba 100644
--- a/drivers/net/ethernet/seeq/ether3.c
+++ b/drivers/net/ethernet/seeq/ether3.c
@@ -617,7 +617,7 @@ if (next_ptr < RX_START || next_ptr >= RX_END) {
  break;
 }
 		/*
- 		 * ignore our own packets...
+		 * ignore our own packets...
 	 	 */
 		if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) &&
 		    !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) {
@@ -672,7 +672,7 @@ if (next_ptr < RX_START || next_ptr >= RX_END) {
 	 */
 	if (!(ether3_inw(REG_STATUS) & STAT_RXON)) {
 		dev->stats.rx_dropped++;
-    		ether3_outw(next_ptr, REG_RECVPTR);
+		ether3_outw(next_ptr, REG_RECVPTR);
 		ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND);
 	}
 
@@ -690,11 +690,11 @@ static void ether3_tx(struct net_device *dev)
 	do {
 	    	unsigned long status;
 
-    		/*
+		/*
 	    	 * Read the packet header
-    		 */
+		 */
 	    	ether3_setbuffer(dev, buffer_read, tx_tail * 0x600);
-    		status = ether3_readlong(dev);
+		status = ether3_readlong(dev);
 
 		/*
 		 * Check to see if this packet has been transmitted
-- 
2.8.1

[PATCH 14/20] net: sis: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/sis/sis900.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 620c26f..ca9c00b 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -678,12 +678,12 @@ static int sis900_mii_probe(struct net_device *net_dev)
 	/* Reset phy if default phy is internal sis900 */
         if ((sis_priv->mii->phy_id0 == 0x001D) &&
 	    ((sis_priv->mii->phy_id1&0xFFF0) == 0x8000))
-        	status = sis900_reset_phy(net_dev, sis_priv->cur_phy);
+		status = sis900_reset_phy(net_dev, sis_priv->cur_phy);
 
         /* workaround for ICS1893 PHY */
         if ((sis_priv->mii->phy_id0 == 0x0015) &&
             ((sis_priv->mii->phy_id1&0xFFF0) == 0xF440))
-            	mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200);
+		mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200);
 
 	if(status & MII_STAT_LINK){
 		while (poll_bit) {
@@ -727,7 +727,7 @@ static int sis900_mii_probe(struct net_device *net_dev)
 static u16 sis900_default_phy(struct net_device * net_dev)
 {
 	struct sis900_private *sis_priv = netdev_priv(net_dev);
- 	struct mii_phy *phy = NULL, *phy_home = NULL,
+	struct mii_phy *phy = NULL, *phy_home = NULL,
 		*default_phy = NULL, *phy_lan = NULL;
 	u16 status;
 
@@ -1339,18 +1339,18 @@ static void sis900_timer(struct timer_list *t)
 	} else {
 	/* Link ON -> OFF */
                 if (!(status & MII_STAT_LINK)){
-                	netif_carrier_off(net_dev);
+			netif_carrier_off(net_dev);
 			if(netif_msg_link(sis_priv))
-                		printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+				printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
 
-                	/* Change mode issue */
-                	if ((mii_phy->phy_id0 == 0x001D) &&
-			    ((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
-               			sis900_reset_phy(net_dev,  sis_priv->cur_phy);
+			/* Change mode issue */
+			if ((mii_phy->phy_id0 == 0x001D) &&
+				((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
+					sis900_reset_phy(net_dev,  sis_priv->cur_phy);
 
 			sis630_set_eq(net_dev, sis_priv->chipset_rev);
 
-                	goto LookForLink;
+			goto LookForLink;
                 }
 	}
 
@@ -2331,7 +2331,7 @@ static int sis900_set_config(struct net_device *dev, struct ifmap *map)
 		case IF_PORT_10BASE2: /* 10Base2 */
 		case IF_PORT_AUI: /* AUI */
 		case IF_PORT_100BASEFX: /* 100BaseFx */
-                	/* These Modes are not supported (are they?)*/
+			/* These Modes are not supported (are they?)*/
 			return -EOPNOTSUPP;
 
 		default:
-- 
2.8.1

[PATCH 15/20] net: smsc: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/smsc/smc9194.c | 42 ++++++++++++++++++-------------------
 drivers/net/ethernet/smsc/smc91x.c  | 14 ++++++-------
 2 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index 4b2330d..bf7c8c8 100644
--- a/drivers/net/ethernet/smsc/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -182,8 +182,8 @@ struct smc_local {
 	struct sk_buff * saved_skb;
 
 	/*
- 	 . This keeps track of how many packets that I have
- 	 . sent out.  When an TX_EMPTY interrupt comes, I know
+	 . This keeps track of how many packets that I have
+	 . sent out.  When an TX_EMPTY interrupt comes, I know
 	 . that all of these have been sent.
 	*/
 	int	packets_waiting;
@@ -343,7 +343,7 @@ static void smc_reset( int ioaddr )
 
 	/* Note:  It doesn't seem that waiting for the MMU busy is needed here,
 	   but this is a place where future chipsets _COULD_ break.  Be wary
- 	   of issuing another MMU command right after this */
+	   of issuing another MMU command right after this */
 
 	outb( 0, ioaddr + INT_MASK );
 }
@@ -521,9 +521,9 @@ static netdev_tx_t smc_wait_to_send_packet(struct sk_buff *skb,
 	SMC_SELECT_BANK( 2 );
 	outw( MC_ALLOC | numPages, ioaddr + MMU_CMD );
 	/*
- 	. Performance Hack
+	. Performance Hack
 	.
- 	. wait a short amount of time.. if I can send a packet now, I send
+	. wait a short amount of time.. if I can send a packet now, I send
 	. it now.  Otherwise, I enable an interrupt and wait for one to be
 	. available.
 	.
@@ -540,17 +540,17 @@ static netdev_tx_t smc_wait_to_send_packet(struct sk_buff *skb,
 		if ( status & IM_ALLOC_INT ) {
 			/* acknowledge the interrupt */
 			outb( IM_ALLOC_INT, ioaddr + INTERRUPT );
-  			break;
+			break;
 		}
-   	} while ( -- time_out );
+	} while ( -- time_out );
 
-   	if ( !time_out ) {
+	if ( !time_out ) {
 		/* oh well, wait until the chip finds memory later */
 		SMC_ENABLE_INT( IM_ALLOC_INT );
 		PRINTK2((CARDNAME": memory allocation deferred.\n"));
 		/* it's deferred, but I'll handle it later */
 		return NETDEV_TX_OK;
-   	}
+	}
 	/* or YES! I can send the packet now.. */
 	smc_hardware_send_packet(dev);
 	netif_wake_queue(dev);
@@ -616,7 +616,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
 #endif
 
 	/* send the packet length ( +6 for status, length and ctl byte )
- 	   and the status word ( set to zeros ) */
+	   and the status word ( set to zeros ) */
 #ifdef USE_32_BIT
 	outl(  (length +6 ) << 16 , ioaddr + DATA_1 );
 #else
@@ -629,8 +629,8 @@ static void smc_hardware_send_packet( struct net_device * dev )
 	/* send the actual data
 	 . I _think_ it's faster to send the longs first, and then
 	 . mop up by sending the last word.  It depends heavily
- 	 . on alignment, at least on the 486.  Maybe it would be
- 	 . a good idea to check which is optimal?  But that could take
+	 . on alignment, at least on the 486.  Maybe it would be
+	 . a good idea to check which is optimal?  But that could take
 	 . almost as much time as is saved?
 	*/
 #ifdef USE_32_BIT
@@ -757,7 +757,7 @@ static int __init smc_findirq(int ioaddr)
 	outb( IM_ALLOC_INT, ioaddr + INT_MASK );
 
 	/*
- 	 . Allocate 512 bytes of memory.  Note that the chip was just
+	 . Allocate 512 bytes of memory.  Note that the chip was just
 	 . reset so all the memory is available
 	*/
 	outw( MC_ALLOC | 1, ioaddr + MMU_CMD );
@@ -871,7 +871,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 		goto err_out;
 	}
 	/* The above MIGHT indicate a device, but I need to write to further
- 	 	test this.  */
+		test this.  */
 	outw( 0x0, ioaddr + BANK_SELECT );
 	bank = inw( ioaddr + BANK_SELECT );
 	if ( (bank & 0xFF00 ) != 0x3300 ) {
@@ -879,7 +879,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 		goto err_out;
 	}
 	/* well, we've already written once, so hopefully another time won't
- 	   hurt.  This time, I need to switch the bank register to bank 1,
+	   hurt.  This time, I need to switch the bank register to bank 1,
 	   so I can access the base address register */
 	SMC_SELECT_BANK(1);
 	base_address_register = inw( ioaddr + BASE );
@@ -917,7 +917,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 	dev->base_addr = ioaddr;
 
 	/*
- 	 . Get the MAC address ( bank 1, regs 4 - 9 )
+	 . Get the MAC address ( bank 1, regs 4 - 9 )
 	*/
 	SMC_SELECT_BANK( 1 );
 	for ( i = 0; i < 6; i += 2 ) {
@@ -938,8 +938,8 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 
 	/*
 	 Now, I want to find out more about the chip.  This is sort of
- 	 redundant, but it's cleaner to have it in both, rather than having
- 	 one VERY long probe procedure.
+	 redundant, but it's cleaner to have it in both, rather than having
+	 one VERY long probe procedure.
 	*/
 	SMC_SELECT_BANK(3);
 	revision_register  = inw( ioaddr + REVISION );
@@ -967,7 +967,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 	/*
 	 . If dev->irq is 0, then the device has to be banged on to see
 	 . what the IRQ is.
- 	 .
+	 .
 	 . This banging doesn't always detect the IRQ, for unknown reasons.
 	 . a workaround is to reset the chip and try again.
 	 .
@@ -978,7 +978,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 	 .
 	 . Specifying an IRQ is done with the assumption that the user knows
 	 . what (s)he is doing.  No checking is done!!!!
- 	 .
+	 .
 	*/
 	if ( dev->irq < 2 ) {
 		int	trials;
@@ -1070,7 +1070,7 @@ static int smc_open(struct net_device *dev)
 	}
 
 	/*
-  		According to Becker, I have to set the hardware address
+		According to Becker, I have to set the hardware address
 		at this point, because the (l)user can set it with an
 		ioctl.  Easily done...
 	*/
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index cbde83f..813ea94 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -671,19 +671,19 @@ smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		status = SMC_GET_INT(lp);
 		if (status & IM_ALLOC_INT) {
 			SMC_ACK_INT(lp, IM_ALLOC_INT);
-  			break;
+			break;
 		}
-   	} while (--poll_count);
+	} while (--poll_count);
 
 	smc_special_unlock(&lp->lock, flags);
 
 	lp->pending_tx_skb = skb;
-   	if (!poll_count) {
+	if (!poll_count) {
 		/* oh well, wait until the chip finds memory later */
 		netif_stop_queue(dev);
 		DBG(2, dev, "TX memory allocation deferred.\n");
 		SMC_ENABLE_INT(lp, IM_ALLOC_INT);
-   	} else {
+	} else {
 		/*
 		 * Allocation succeeded: push packet to the chip's own memory
 		 * immediately.
@@ -1790,7 +1790,7 @@ static int smc_findirq(struct smc_local *lp)
 	SMC_SET_INT_MASK(lp, IM_ALLOC_INT);
 
 	/*
- 	 * Allocate 512 bytes of memory.  Note that the chip was just
+	 * Allocate 512 bytes of memory.  Note that the chip was just
 	 * reset so all the memory is available
 	 */
 	SMC_SET_MMU_CMD(lp, MC_ALLOC | 1);
@@ -1998,8 +1998,8 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 
 	/* Grab the IRQ */
 	retval = request_irq(dev->irq, smc_interrupt, irq_flags, dev->name, dev);
-      	if (retval)
-      		goto err_out;
+	if (retval)
+		goto err_out;
 
 #ifdef CONFIG_ARCH_PXA
 #  ifdef SMC_USE_PXA_DMA
-- 
2.8.1

[PATCH 16/20] net: sun: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/sun/cassini.c |  2 +-
 drivers/net/ethernet/sun/sungem.c  | 20 ++++++++++----------
 drivers/net/ethernet/sun/sunhme.c  |  6 +++---
 3 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index 54f45d8..981685c 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -486,7 +486,7 @@ static cas_page_t *cas_page_alloc(struct cas *cp, const gfp_t flags)
 /* initialize spare pool of rx buffers, but allocate during the open */
 static void cas_spare_init(struct cas *cp)
 {
-  	spin_lock(&cp->rx_inuse_lock);
+	spin_lock(&cp->rx_inuse_lock);
 	INIT_LIST_HEAD(&cp->rx_inuse_list);
 	spin_unlock(&cp->rx_inuse_lock);
 
diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c
index 9790656..cfb9e21 100644
--- a/drivers/net/ethernet/sun/sungem.c
+++ b/drivers/net/ethernet/sun/sungem.c
@@ -1258,8 +1258,8 @@ static void gem_begin_auto_negotiation(struct gem *gp,
 			&advertising, ep->link_modes.advertising);
 
 	if (gp->phy_type != phy_mii_mdio0 &&
-     	    gp->phy_type != phy_mii_mdio1)
-     	    	goto non_mii;
+	    gp->phy_type != phy_mii_mdio1)
+		goto non_mii;
 
 	/* Setup advertise */
 	if (found_mii_phy(gp))
@@ -1410,7 +1410,7 @@ static int gem_set_link_modes(struct gem *gp)
 
 	if (gp->phy_type == phy_serialink ||
 	    gp->phy_type == phy_serdes) {
- 		u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
+		u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
 
 		if (pcs_lpa & (PCS_MIIADV_SP | PCS_MIIADV_AP))
 			pause = 1;
@@ -1892,7 +1892,7 @@ static void gem_init_mac(struct gem *gp)
 
 static void gem_init_pause_thresholds(struct gem *gp)
 {
-       	u32 cfg;
+	u32 cfg;
 
 	/* Calculate pause thresholds.  Setting the OFF threshold to the
 	 * full RX fifo size effectively disables PAUSE generation which
@@ -1914,15 +1914,15 @@ static void gem_init_pause_thresholds(struct gem *gp)
 	/* Configure the chip "burst" DMA mode & enable some
 	 * HW bug fixes on Apple version
 	 */
-       	cfg  = 0;
-       	if (gp->pdev->vendor == PCI_VENDOR_ID_APPLE)
+	cfg  = 0;
+	if (gp->pdev->vendor == PCI_VENDOR_ID_APPLE)
 		cfg |= GREG_CFG_RONPAULBIT | GREG_CFG_ENBUG2FIX;
 #if !defined(CONFIG_SPARC64) && !defined(CONFIG_ALPHA)
-       	cfg |= GREG_CFG_IBURST;
+	cfg |= GREG_CFG_IBURST;
 #endif
-       	cfg |= ((31 << 1) & GREG_CFG_TXDMALIM);
-       	cfg |= ((31 << 6) & GREG_CFG_RXDMALIM);
-       	writel(cfg, gp->regs + GREG_CFG);
+	cfg |= ((31 << 1) & GREG_CFG_TXDMALIM);
+	cfg |= ((31 << 6) & GREG_CFG_RXDMALIM);
+	writel(cfg, gp->regs + GREG_CFG);
 
 	/* If Infinite Burst didn't stick, then use different
 	 * thresholds (and Apple bug fixes don't exist)
diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index 54b53db..a2c1a40 100644
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -2286,8 +2286,8 @@ static netdev_tx_t happy_meal_start_xmit(struct sk_buff *skb,
 					 struct net_device *dev)
 {
 	struct happy_meal *hp = netdev_priv(dev);
- 	int entry;
- 	u32 tx_flags;
+	int entry;
+	u32 tx_flags;
 
 	tx_flags = TXFLAG_OWN;
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
@@ -2301,7 +2301,7 @@ static netdev_tx_t happy_meal_start_xmit(struct sk_buff *skb,
 
 	spin_lock_irq(&hp->happy_lock);
 
- 	if (TX_BUFFS_AVAIL(hp) <= (skb_shinfo(skb)->nr_frags + 1)) {
+	if (TX_BUFFS_AVAIL(hp) <= (skb_shinfo(skb)->nr_frags + 1)) {
 		netif_stop_queue(dev);
 		spin_unlock_irq(&hp->happy_lock);
 		printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n",
-- 
2.8.1

[PATCH 17/20] net: fealnx: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/fealnx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/fealnx.c b/drivers/net/ethernet/fealnx.c
index 0908771..0f141c1 100644
--- a/drivers/net/ethernet/fealnx.c
+++ b/drivers/net/ethernet/fealnx.c
@@ -144,7 +144,7 @@ struct chip_info {
 };
 
 static const struct chip_info skel_netdrv_tbl[] = {
- 	{ "100/10M Ethernet PCI Adapter",	HAS_MII_XCVR },
+	{ "100/10M Ethernet PCI Adapter",	HAS_MII_XCVR },
 	{ "100/10M Ethernet PCI Adapter",	HAS_CHIP_XCVR },
 	{ "1000/100/10M Ethernet PCI Adapter",	HAS_MII_XCVR },
 };
-- 
2.8.1

[PATCH 18/20] net: xircom: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/xircom/xirc2ps_cs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c
index 2049d76..4f6db6f 100644
--- a/drivers/net/ethernet/xircom/xirc2ps_cs.c
+++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c
@@ -1232,7 +1232,7 @@ do_start_xmit(struct sk_buff *skb, struct net_device *dev)
     if (pktlen < ETH_ZLEN)
     {
         if (skb_padto(skb, ETH_ZLEN))
-        	return NETDEV_TX_OK;
+		return NETDEV_TX_OK;
 	pktlen = ETH_ZLEN;
     }
 
-- 
2.8.1

[PATCH 19/20] net: 8390: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/8390/axnet_cs.c  | 14 +++++++-------
 drivers/net/ethernet/8390/pcnet_cs.c  |  2 +-
 drivers/net/ethernet/8390/smc-ultra.c |  6 +++---
 drivers/net/ethernet/8390/stnic.c     |  2 +-
 4 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c
index 2488bfd..8c321df 100644
--- a/drivers/net/ethernet/8390/axnet_cs.c
+++ b/drivers/net/ethernet/8390/axnet_cs.c
@@ -767,7 +767,7 @@ module_pcmcia_driver(axnet_cs_driver);
   Paul Gortmaker	: tweak ANK's above multicast changes a bit.
   Paul Gortmaker	: update packet statistics for v2.1.x
   Alan Cox		: support arbitrary stupid port mappings on the
-  			  68K Macintosh. Support >16bit I/O spaces
+			  68K Macintosh. Support >16bit I/O spaces
   Paul Gortmaker	: add kmod support for auto-loading of the 8390
 			  module by all drivers that require it.
   Alan Cox		: Spinlocking work, added 'BUG_83C690'
@@ -1091,7 +1091,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id)
 	long e8390_base;
 	int interrupts, nr_serviced = 0, i;
 	struct ei_device *ei_local;
-    	int handled = 0;
+	int handled = 0;
 	unsigned long flags;
 
 	e8390_base = dev->base_addr;
@@ -1587,12 +1587,12 @@ static void do_set_multicast_list(struct net_device *dev)
 	}
 	outb_p(E8390_NODMA + E8390_PAGE0, e8390_base + E8390_CMD);
 
-  	if(dev->flags&IFF_PROMISC)
-  		outb_p(E8390_RXCONFIG | 0x58, e8390_base + EN0_RXCR);
+	if(dev->flags&IFF_PROMISC)
+		outb_p(E8390_RXCONFIG | 0x58, e8390_base + EN0_RXCR);
 	else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev))
-  		outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
-  	else
-  		outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
+		outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
+	else
+		outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
 
 	outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
 }
diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c
index 9d3b1e0..cac0367 100644
--- a/drivers/net/ethernet/8390/pcnet_cs.c
+++ b/drivers/net/ethernet/8390/pcnet_cs.c
@@ -1527,7 +1527,7 @@ static const struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
-  	PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
+	PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
 	PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96),
 	PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224),
diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c
index 3fe3b4d..1d8ed73 100644
--- a/drivers/net/ethernet/8390/smc-ultra.c
+++ b/drivers/net/ethernet/8390/smc-ultra.c
@@ -347,11 +347,11 @@ static int __init ultra_probe_isapnp(struct net_device *dev)
                                             idev))) {
                         /* Avoid already found cards from previous calls */
                         if (pnp_device_attach(idev) < 0)
-                        	continue;
+				continue;
                         if (pnp_activate_dev(idev) < 0) {
                               __again:
-                        	pnp_device_detach(idev);
-                        	continue;
+				pnp_device_detach(idev);
+				continue;
                         }
 			/* if no io and irq, search for next */
 			if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0))
diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c
index 1f0670c..fbbd7f2 100644
--- a/drivers/net/ethernet/8390/stnic.c
+++ b/drivers/net/ethernet/8390/stnic.c
@@ -114,7 +114,7 @@ static int __init stnic_probe(void)
   /* New style probing API */
   dev = alloc_ei_netdev();
   if (!dev)
-  	return -ENOMEM;
+	return -ENOMEM;
 
 #ifdef CONFIG_SH_STANDARD_BIOS
   sh_bios_get_node_addr (stnic_eadr);
-- 
2.8.1

[PATCH 20/20] net: fujitsu: remove leading spaces before tabs

[Hui Tang]

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
 drivers/net/ethernet/fujitsu/fmvj18x_cs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
index a7b7a4a..7e451e6 100644
--- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -812,9 +812,9 @@ static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
     
     if (length < ETH_ZLEN)
     {
-    	if (skb_padto(skb, ETH_ZLEN))
-    		return NETDEV_TX_OK;
-    	length = ETH_ZLEN;
+	if (skb_padto(skb, ETH_ZLEN))
+		return NETDEV_TX_OK;
+	length = ETH_ZLEN;
     }
 
     netif_stop_queue(dev);
-- 
2.8.1

Re: [PATCH 00/20] net: ethernet: remove leading spaces before tabs

[Lijun Pan]

> On May 19, 2021, at 12:30 AM, Hui Tang <tanghui20@huawei.com> wrote:
> 
> There are a few leading spaces before tabs and remove it by running the
> following commard:
> 
>        $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
>        $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
> 
> Hui Tang (20):
>  net: 3com: remove leading spaces before tabs
>  net: alteon: remove leading spaces before tabs
>  net: amd: remove leading spaces before tabs
>  net: apple: remove leading spaces before tabs
>  net: broadcom: remove leading spaces before tabs
>  net: chelsio: remove leading spaces before tabs
>  net: dec: remove leading spaces before tabs
>  net: dlink: remove leading spaces before tabs
>  net: ibm: remove leading spaces before tabs
>  net: marvell: remove leading spaces before tabs
>  net: natsemi: remove leading spaces before tabs
>  net: realtek: remove leading spaces before tabs
>  net: seeq: remove leading spaces before tabs
>  net: sis: remove leading spaces before tabs
>  net: smsc: remove leading spaces before tabs
>  net: sun: remove leading spaces before tabs
>  net: fealnx: remove leading spaces before tabs
>  net: xircom: remove leading spaces before tabs
>  net: 8390: remove leading spaces before tabs
>  net: fujitsu: remove leading spaces before tabs
> 
> drivers/net/ethernet/3com/3c59x.c            |  2 +-
> drivers/net/ethernet/8390/axnet_cs.c         | 14 +++++-----
> drivers/net/ethernet/8390/pcnet_cs.c         |  2 +-
> drivers/net/ethernet/8390/smc-ultra.c        |  6 ++--
> drivers/net/ethernet/8390/stnic.c            |  2 +-
> drivers/net/ethernet/alteon/acenic.c         | 26 ++++++++---------
> drivers/net/ethernet/amd/amd8111e.c          |  4 +--
> drivers/net/ethernet/amd/amd8111e.h          |  6 ++--
> drivers/net/ethernet/amd/atarilance.c        |  2 +-
> drivers/net/ethernet/amd/declance.c          |  2 +-
> drivers/net/ethernet/amd/lance.c             |  4 +--
> drivers/net/ethernet/amd/ni65.c              | 12 ++++----
> drivers/net/ethernet/amd/nmclan_cs.c         | 12 ++++----
> drivers/net/ethernet/amd/sun3lance.c         | 12 ++++----
> drivers/net/ethernet/apple/bmac.c            | 30 ++++++++++----------
> drivers/net/ethernet/apple/mace.c            |  8 +++---
> drivers/net/ethernet/broadcom/b44.c          | 20 ++++++-------
> drivers/net/ethernet/broadcom/bnx2.c         |  6 ++--
> drivers/net/ethernet/chelsio/cxgb3/sge.c     |  2 +-
> drivers/net/ethernet/dec/tulip/de2104x.c     |  4 +--
> drivers/net/ethernet/dec/tulip/de4x5.c       |  6 ++--
> drivers/net/ethernet/dec/tulip/dmfe.c        | 18 ++++++------
> drivers/net/ethernet/dec/tulip/pnic2.c       |  4 +--
> drivers/net/ethernet/dec/tulip/uli526x.c     | 10 +++----
> drivers/net/ethernet/dec/tulip/winbond-840.c |  4 +--
> drivers/net/ethernet/dlink/sundance.c        | 12 ++++----
> drivers/net/ethernet/fealnx.c                |  2 +-
> drivers/net/ethernet/fujitsu/fmvj18x_cs.c    |  6 ++--
> drivers/net/ethernet/ibm/emac/emac.h         |  2 +-
> drivers/net/ethernet/marvell/skge.h          |  2 +-
> drivers/net/ethernet/marvell/sky2.c          | 30 ++++++++++----------
> drivers/net/ethernet/marvell/sky2.h          |  8 +++---
> drivers/net/ethernet/natsemi/natsemi.c       |  6 ++--
> drivers/net/ethernet/realtek/8139cp.c        |  6 ++--
> drivers/net/ethernet/realtek/8139too.c       |  6 ++--
> drivers/net/ethernet/realtek/atp.c           |  4 +--
> drivers/net/ethernet/seeq/ether3.c           | 10 +++----
> drivers/net/ethernet/sis/sis900.c            | 22 +++++++--------
> drivers/net/ethernet/smsc/smc9194.c          | 42 ++++++++++++++--------------
> drivers/net/ethernet/smsc/smc91x.c           | 14 +++++-----
> drivers/net/ethernet/sun/cassini.c           |  2 +-
> drivers/net/ethernet/sun/sungem.c            | 20 ++++++-------
> drivers/net/ethernet/sun/sunhme.c            |  6 ++--
> drivers/net/ethernet/xircom/xirc2ps_cs.c     |  2 +-
> 44 files changed, 210 insertions(+), 210 deletions(-)
> 
> —

It should be targeting net-next, I believe.

Re: [PATCH 00/20] net: ethernet: remove leading spaces before tabs

[David Miller]

From: Lijun Pan <ljp@linux.vnet.ibm.com>
Date: Wed, 19 May 2021 01:06:28 -0500

> It should be targeting net-next, I believe.

That's where I applied this series, so no worries.

Re: [PATCH 00/20] net: ethernet: remove leading spaces before tabs

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Wed, 19 May 2021 13:30:33 +0800 you wrote:
> There are a few leading spaces before tabs and remove it by running the
> following commard:
> 
>         $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
>         $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
> 
> Hui Tang (20):
>   net: 3com: remove leading spaces before tabs
>   net: alteon: remove leading spaces before tabs
>   net: amd: remove leading spaces before tabs
>   net: apple: remove leading spaces before tabs
>   net: broadcom: remove leading spaces before tabs
>   net: chelsio: remove leading spaces before tabs
>   net: dec: remove leading spaces before tabs
>   net: dlink: remove leading spaces before tabs
>   net: ibm: remove leading spaces before tabs
>   net: marvell: remove leading spaces before tabs
>   net: natsemi: remove leading spaces before tabs
>   net: realtek: remove leading spaces before tabs
>   net: seeq: remove leading spaces before tabs
>   net: sis: remove leading spaces before tabs
>   net: smsc: remove leading spaces before tabs
>   net: sun: remove leading spaces before tabs
>   net: fealnx: remove leading spaces before tabs
>   net: xircom: remove leading spaces before tabs
>   net: 8390: remove leading spaces before tabs
>   net: fujitsu: remove leading spaces before tabs
> 
> [...]

Here is the summary with links:
  - [01/20] net: 3com: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/959dc069aed8
  - [02/20] net: alteon: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/40b1f92676f2
  - [03/20] net: amd: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/106b4cb59766
  - [04/20] net: apple: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/a22cf81d634c
  - [05/20] net: broadcom: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/90e4403a6d37
  - [06/20] net: chelsio: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/21b128fde6e0
  - [07/20] net: dec: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/cf82f9b165e4
  - [08/20] net: dlink: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/e6f0f977407f
  - [09/20] net: ibm: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/c11c900143e4
  - [10/20] net: marvell: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/717dc24dc5d6
  - [11/20] net: natsemi: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/4a0949778c4e
  - [12/20] net: realtek: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/f95a73a8a8a8
  - [13/20] net: seeq: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/bf53445d81e3
  - [14/20] net: sis: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/a294ddfccb45
  - [15/20] net: smsc: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/996d7ab8badf
  - [16/20] net: sun: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/b54f440cb871
  - [17/20] net: fealnx: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/d1e4916fa703
  - [18/20] net: xircom: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/223f02acce1a
  - [19/20] net: 8390: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/59909c1ab71d
  - [20/20] net: fujitsu: remove leading spaces before tabs
    https://git.kernel.org/netdev/net-next/c/2174fbd71914

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html