From: Guangbin Huang <huangguangbin2@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>, <xie.he.0141@gmail.com>,
<ms@dev.tdt.de>, <willemb@google.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lipeng321@huawei.com>, <huangguangbin2@huawei.com>
Subject: [PATCH net-next 12/16] net: farsync: remove redundant spaces
Date: Tue, 8 Jun 2021 16:12:38 +0800 [thread overview]
Message-ID: <1623139962-34847-13-git-send-email-huangguangbin2@huawei.com> (raw)
In-Reply-To: <1623139962-34847-1-git-send-email-huangguangbin2@huawei.com>
From: Peng Li <lipeng321@huawei.com>
According to the chackpatch.pl,
space prohibited between function name and open parenthesis '(',
no space is necessary after a cast.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
drivers/net/wan/farsync.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 8b96f35..bbe87d9 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -708,7 +708,7 @@ fst_cpurelease(struct fst_card_info *card)
if (card->family == FST_FAMILY_TXU) {
/* Force posted writes to complete
*/
- (void) readb(card->mem);
+ (void)readb(card->mem);
/* Release LRESET DO = 1
* Then release Local Hold, DO = 1
@@ -716,7 +716,7 @@ fst_cpurelease(struct fst_card_info *card)
outw(0x040e, card->pci_conf + CNTRL_9054 + 2);
outw(0x040f, card->pci_conf + CNTRL_9054 + 2);
} else {
- (void) readb(card->ctlmem);
+ (void)readb(card->ctlmem);
}
}
@@ -726,7 +726,7 @@ static inline void
fst_clear_intr(struct fst_card_info *card)
{
if (card->family == FST_FAMILY_TXU) {
- (void) readb(card->ctlmem);
+ (void)readb(card->ctlmem);
} else {
/* Poke the appropriate PLX chip register (same as enabling interrupts)
*/
@@ -984,8 +984,8 @@ fst_rx_config(struct fst_port_info *port)
for (i = 0; i < NUM_RX_BUFFER; i++) {
offset = BUF_OFFSET(rxBuffer[pi][i][0]);
- FST_WRW(card, rxDescrRing[pi][i].ladr, (u16) offset);
- FST_WRB(card, rxDescrRing[pi][i].hadr, (u8) (offset >> 16));
+ FST_WRW(card, rxDescrRing[pi][i].ladr, (u16)offset);
+ FST_WRB(card, rxDescrRing[pi][i].hadr, (u8)(offset >> 16));
FST_WRW(card, rxDescrRing[pi][i].bcnt, cnv_bcnt(LEN_RX_BUFFER));
FST_WRW(card, rxDescrRing[pi][i].mcnt, LEN_RX_BUFFER);
FST_WRB(card, rxDescrRing[pi][i].bits, DMA_OWN);
@@ -1011,8 +1011,8 @@ fst_tx_config(struct fst_port_info *port)
for (i = 0; i < NUM_TX_BUFFER; i++) {
offset = BUF_OFFSET(txBuffer[pi][i][0]);
- FST_WRW(card, txDescrRing[pi][i].ladr, (u16) offset);
- FST_WRB(card, txDescrRing[pi][i].hadr, (u8) (offset >> 16));
+ FST_WRW(card, txDescrRing[pi][i].ladr, (u16)offset);
+ FST_WRB(card, txDescrRing[pi][i].hadr, (u8)(offset >> 16));
FST_WRW(card, txDescrRing[pi][i].bcnt, 0);
FST_WRB(card, txDescrRing[pi][i].bits, 0);
}
@@ -1697,7 +1697,7 @@ gather_conf_info(struct fst_card_info *card, struct fst_port_info *port,
{
int i;
- memset(info, 0, sizeof (struct fstioc_info));
+ memset(info, 0, sizeof(struct fstioc_info));
i = port->index;
info->kernelVersion = LINUX_VERSION_CODE;
@@ -1905,7 +1905,7 @@ fst_get_iface(struct fst_card_info *card, struct fst_port_info *port,
if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &sync, sizeof(sync)))
return -EFAULT;
- ifr->ifr_settings.size = sizeof (sync);
+ ifr->ifr_settings.size = sizeof(sync);
return 0;
}
--
2.8.1
next prev parent reply other threads:[~2021-06-08 8:16 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-08 8:12 [PATCH net-next 00/16] net: farsync: clean up some code style issues Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 01/16] net: farsync: remove redundant blank lines Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 02/16] net: farsync: add blank line after declarations Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 03/16] net: farsync: fix the code style issue about "foo* bar" Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 04/16] net: farsync: move out assignment in if condition Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 05/16] net: farsync: remove redundant initialization for statics Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 06/16] net: farsync: fix the comments style issue Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 07/16] net: farsync: remove trailing whitespaces Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 08/16] net: farsync: code indent use tabs where possible Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 09/16] net: farsync: fix the code style issue about macros Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 10/16] net: farsync: add some required spaces Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 11/16] net: farsync: remove redundant braces {} Guangbin Huang
2021-06-08 8:12 ` Guangbin Huang [this message]
2021-06-08 8:12 ` [PATCH net-next 13/16] net: farsync: remove redundant parentheses Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 14/16] net: farsync: fix the alignment issue Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 15/16] net: farsync: remove redundant return Guangbin Huang
2021-06-08 8:12 ` [PATCH net-next 16/16] net: farsync: replace comparison to NULL with "fst_card_array[i]" Guangbin Huang
2021-06-08 19:10 ` [PATCH net-next 00/16] net: farsync: clean up some code style issues patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1623139962-34847-13-git-send-email-huangguangbin2@huawei.com \
--to=huangguangbin2@huawei.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lipeng321@huawei.com \
--cc=ms@dev.tdt.de \
--cc=netdev@vger.kernel.org \
--cc=willemb@google.com \
--cc=xie.he.0141@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).