From: Guangbin Huang <huangguangbin2@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<salil.mehta@huawei.com>, <lipeng321@huawei.com>,
<huangguangbin2@huawei.com>
Subject: [PATCH net-next 3/3] net: hns3: add support for link diagnosis info in debugfs
Date: Thu, 24 Jun 2021 22:36:45 +0800 [thread overview]
Message-ID: <1624545405-37050-4-git-send-email-huangguangbin2@huawei.com> (raw)
In-Reply-To: <1624545405-37050-1-git-send-email-huangguangbin2@huawei.com>
In order to know reason why link down, add a debugfs file
"link_diagnosis_info" to get link faults from firmware, and each bit
represents one kind of fault.
usage example:
$ cat link_diagnosis_info
Reference clock lost
SFP is absent
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 8 +++
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 3 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 58 ++++++++++++++++++++++
4 files changed, 70 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index e0b7c3c44e7b..34e5eb65c7b1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -294,6 +294,7 @@ enum hnae3_dbg_cmd {
HNAE3_DBG_CMD_MAC_TNL_STATUS,
HNAE3_DBG_CMD_SERV_INFO,
HNAE3_DBG_CMD_UMV_INFO,
+ HNAE3_DBG_CMD_LINK_DIAGNOSIS_INFO,
HNAE3_DBG_CMD_UNKNOWN,
};
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index 532523069d74..6a0385b5f80a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -337,6 +337,14 @@ static struct hns3_dbg_cmd_info hns3_dbg_cmd[] = {
.buf_len = HNS3_DBG_READ_LEN,
.init = hns3_dbg_common_file_init,
},
+ {
+ .name = "link_diagnosis_info",
+ .cmd = HNAE3_DBG_CMD_LINK_DIAGNOSIS_INFO,
+ .dentry = HNS3_DBG_DENTRY_COMMON,
+ .buf_len = HNS3_DBG_READ_LEN,
+ .init = hns3_dbg_common_file_init,
+ },
+
};
static struct hns3_dbg_cap_info hns3_dbg_cap[] = {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 18bde77ef944..8e5be127909b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -316,6 +316,9 @@ enum hclge_opcode_type {
/* PHY command */
HCLGE_OPC_PHY_LINK_KSETTING = 0x7025,
HCLGE_OPC_PHY_REG = 0x7026,
+
+ /* Query link diagnosis info command */
+ HCLGE_OPC_QUERY_LINK_DIAGNOSIS = 0x702A,
};
#define HCLGE_TQP_REG_OFFSET 0x80000
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
index 288788186ecc..e6d8d070711d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
@@ -2301,6 +2301,60 @@ static int hclge_dbg_dump_mac_mc(struct hclge_dev *hdev, char *buf, int len)
return 0;
}
+/* The order of each reason is defined by firmware, so don't change the order */
+static const char * const link_down_reason[] = {
+ "Reference clock lost",
+ "SFP tx is disabled",
+ "SFP is absent",
+ "PHY power down",
+ "Serdes analog loss of signal",
+ "Auto negotiation failed",
+ "Link training failed",
+ "Remote fault",
+ "I2C bus error",
+ "BER is too high",
+};
+
+static int hclge_dbg_dump_link_diagnosis_info(struct hclge_dev *hdev, char *buf,
+ int len)
+{
+#define HCLGE_DBG_BIT_LEN_PER_WORD 32
+
+ u16 word_index, bit_index, i;
+ struct hclge_desc desc;
+ int pos = 0;
+ u32 data;
+ int ret;
+
+ if (hdev->ae_dev->dev_version <= HNAE3_DEVICE_VERSION_V2) {
+ dev_err(&hdev->pdev->dev, "Operation not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_QUERY_LINK_DIAGNOSIS, true);
+ ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (ret) {
+ dev_err(&hdev->pdev->dev,
+ "failed to query link diagnosis info, ret = %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(link_down_reason); i++) {
+ word_index = i / HCLGE_DBG_BIT_LEN_PER_WORD;
+ bit_index = i % HCLGE_DBG_BIT_LEN_PER_WORD;
+
+ data = le32_to_cpu(desc.data[word_index]);
+ if (hnae3_get_bit(data, bit_index))
+ pos += scnprintf(buf + pos, len - pos, "%s\n",
+ link_down_reason[i]);
+ }
+
+ if (!pos)
+ pos += scnprintf(buf + pos, len - pos, "No error\n");
+
+ return 0;
+}
+
static const struct hclge_dbg_func hclge_dbg_cmd_func[] = {
{
.cmd = HNAE3_DBG_CMD_TM_NODES,
@@ -2446,6 +2500,10 @@ static const struct hclge_dbg_func hclge_dbg_cmd_func[] = {
.cmd = HNAE3_DBG_CMD_UMV_INFO,
.dbg_dump = hclge_dbg_dump_umv_info,
},
+ {
+ .cmd = HNAE3_DBG_CMD_LINK_DIAGNOSIS_INFO,
+ .dbg_dump = hclge_dbg_dump_link_diagnosis_info,
+ },
};
int hclge_dbg_read_cmd(struct hnae3_handle *handle, enum hnae3_dbg_cmd cmd,
--
2.8.1
next prev parent reply other threads:[~2021-06-24 14:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-24 14:36 [PATCH net-next 0/3] net: hns3: add new debugfs commands Guangbin Huang
2021-06-24 14:36 ` [PATCH net-next 1/3] net: hns3: add support for FD counter in debugfs Guangbin Huang
2021-06-24 14:36 ` [PATCH net-next 2/3] net: hns3: add support for dumping MAC umv " Guangbin Huang
2021-06-24 14:36 ` Guangbin Huang [this message]
2021-06-24 19:25 ` [PATCH net-next 3/3] net: hns3: add support for link diagnosis info " Jakub Kicinski
2021-06-25 7:08 ` huangguangbin (A)
2021-07-01 9:03 ` huangguangbin (A)
2021-07-01 15:54 ` Jakub Kicinski
2021-07-04 1:37 ` huangguangbin (A)
2021-07-04 19:57 ` Andrew Lunn
2021-07-05 1:12 ` huangguangbin (A)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1624545405-37050-4-git-send-email-huangguangbin2@huawei.com \
--to=huangguangbin2@huawei.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lipeng321@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).