* [PATCH 0/2] pinctrl: qcom: spmi-gpio: Add support to enable/disable output
@ 2021-09-14 2:54 Subbaraman Narayanamurthy
0 siblings, 0 replies; 2+ messages in thread
From: Subbaraman Narayanamurthy @ 2021-09-14 2:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Linus Walleij, Rob Herring
Cc: linux-arm-msm, linux-gpio, devicetree, linux-kernel,
Subbaraman Narayanamurthy
Add support to enable/disable output for Qualcomm SPMI GPIO.
Subbaraman Narayanamurthy (2):
dt-bindings: pinctrl: qcom-pmic-gpio: Add output-{enable,disable}
properties
pinctrl: qcom: spmi-gpio: add support to enable/disable output
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 2 ++
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 8 +++++++-
2 files changed, 9 insertions(+), 1 deletion(-)
--
2.7.4
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH 0/2] pinctrl: qcom: spmi-gpio: Add support to enable/disable output
@ 2021-09-14 2:57 Subbaraman Narayanamurthy
0 siblings, 0 replies; 2+ messages in thread
From: Subbaraman Narayanamurthy @ 2021-09-14 2:57 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Linus Walleij, Rob Herring
Cc: linux-arm-msm, linux-gpio, devicetree, linux-kernel,
Subbaraman Narayanamurthy
Add support to enable/disable output for Qualcomm SPMI GPIO.
Subbaraman Narayanamurthy (2):
dt-bindings: pinctrl: qcom-pmic-gpio: Add output-{enable,disable}
properties
pinctrl: qcom: spmi-gpio: add support to enable/disable output
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 2 ++
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 8 +++++++-
2 files changed, 9 insertions(+), 1 deletion(-)
--
2.7.4
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-09-14 2:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-14 2:54 [PATCH 0/2] pinctrl: qcom: spmi-gpio: Add support to enable/disable output Subbaraman Narayanamurthy
2021-09-14 2:57 Subbaraman Narayanamurthy
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).