* [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts
@ 2021-10-29 22:27 Philip Chen
2021-10-29 22:27 ` [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output Philip Chen
` (3 more replies)
0 siblings, 4 replies; 12+ messages in thread
From: Philip Chen @ 2021-10-29 22:27 UTC (permalink / raw)
To: LKML
Cc: swboyd, dianders, Philip Chen, Andy Gross, Bjorn Andersson,
Rob Herring, devicetree, linux-arm-msm
The edp bridge dts fragment files use the macros defined in
'dt-bindings/gpio/gpio.h'.
To help us more flexibly order the #include lines of dts files in a
board-revision-specific dts file, let's include the gpio header in the
bridge dts fragment files themselves.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi | 2 ++
arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
index a3d69540d4e4..6a84fba178d6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
@@ -5,6 +5,8 @@
* Copyright 2021 Google LLC.
*/
+#include <dt-bindings/gpio/gpio.h>
+
/ {
pp3300_brij_ps8640: pp3300-brij-ps8640 {
compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
index 97d5e45abd1d..6dbf413e4e5b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
@@ -5,6 +5,8 @@
* Copyright 2021 Google LLC.
*/
+#include <dt-bindings/gpio/gpio.h>
+
&dsi0_out {
remote-endpoint = <&sn65dsi86_in>;
data-lanes = <0 1 2 3>;
--
2.33.1.1089.g2158813163f-goog
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output
2021-10-29 22:27 [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts Philip Chen
@ 2021-10-29 22:27 ` Philip Chen
2021-10-29 23:16 ` Stephen Boyd
` (2 more replies)
2021-10-29 22:27 ` [PATCH v3 3/4] arm64: dts: sc7180: Support Lazor/Limozeen rev9 Philip Chen
` (2 subsequent siblings)
3 siblings, 3 replies; 12+ messages in thread
From: Philip Chen @ 2021-10-29 22:27 UTC (permalink / raw)
To: LKML
Cc: swboyd, dianders, Philip Chen, Andy Gross, Bjorn Andersson,
Rob Herring, devicetree, linux-arm-msm
MSM DSI host driver actually parses "data-lanes" in DT and compare
it with the number of DSI lanes the bridge driver sets for
mipi_dsi_device. So we need to always specify "data-lanes" for the
DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
fragment, but missing in parade-ps8640 dts fragment, which requires
a fixup.
Since we'll do 4-lane DSI regardless of which bridge chip is used,
instead of adding "data-lanes" to parade-ps8640 dts fragment, let's
just move "data-lanes" from the bridge dts to sc7180-trogdor.dtsi.
Signed-off-by: Philip Chen <philipchen@chromium.org>
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 1 -
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 4 ++++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
index 6dbf413e4e5b..f869e6a343c1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
@@ -9,7 +9,6 @@
&dsi0_out {
remote-endpoint = <&sn65dsi86_in>;
- data-lanes = <0 1 2 3>;
};
edp_brij_i2c: &i2c2 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index d4f4441179fc..bd5909ffb3dc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -603,6 +603,10 @@ &dsi0 {
vdda-supply = <&vdda_mipi_dsi0_1p2>;
};
+&dsi0_out {
+ data-lanes = <0 1 2 3>;
+};
+
&dsi_phy {
status = "okay";
vdds-supply = <&vdda_mipi_dsi0_pll>;
--
2.33.1.1089.g2158813163f-goog
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 3/4] arm64: dts: sc7180: Support Lazor/Limozeen rev9
2021-10-29 22:27 [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts Philip Chen
2021-10-29 22:27 ` [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output Philip Chen
@ 2021-10-29 22:27 ` Philip Chen
2021-11-01 17:09 ` Doug Anderson
2021-10-29 22:27 ` [PATCH v3 4/4] arm64: dts: sc7180: Support Homestar rev4 Philip Chen
2021-11-20 23:55 ` [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts Bjorn Andersson
3 siblings, 1 reply; 12+ messages in thread
From: Philip Chen @ 2021-10-29 22:27 UTC (permalink / raw)
To: LKML
Cc: swboyd, dianders, Philip Chen, Andy Gross, Bjorn Andersson,
Rob Herring, devicetree, linux-arm-msm
Support Lazor/Limozeen rev9 board where Parade ps8640 is added as the
second source edp bridge.
To support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-lazor.dtsi" to
per-board-rev dts files.
Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-lazor.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
Retroactively edit the v2 change log slightly
(no changes since v2)
Changes in v2:
- Explain why "sc7180.dtsi" is moved out of "sc7180-trogdor-lazor.dtsi"
in the commit message.
- In limozeen (nots) r5 dts, replace "google,rev5-sku5" with
"google,lazor-rev5-sku5" and sort it
- In limozeen (nots) r9 dts, drop the support for "sku5".
- In limozeen r4 dts, remove the redundant "google,lazor-rev6-sku4" and
add "google,lazor-rev7-sku4".
- Do not add panel compatible in -r9 dts files.
- Move the #include line of gpio.h from sc7180.dtsi to the bridge dts
fragments, and factor out this change to patch 1/3.
arch/arm64/boot/dts/qcom/Makefile | 9 +++-
.../sc7180-trogdor-lazor-limozeen-nots-r4.dts | 2 +-
.../sc7180-trogdor-lazor-limozeen-nots-r5.dts | 31 +++++++++++++
...sc7180-trogdor-lazor-limozeen-nots-r9.dts} | 8 ++--
.../qcom/sc7180-trogdor-lazor-limozeen-r4.dts | 46 +++++++++++++++++++
...s => sc7180-trogdor-lazor-limozeen-r9.dts} | 6 ++-
.../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 2 +
.../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 2 +
.../dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 9 +++-
.../dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 9 +++-
.../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 8 +++-
.../dts/qcom/sc7180-trogdor-lazor-r9-kb.dts | 22 +++++++++
.../dts/qcom/sc7180-trogdor-lazor-r9-lte.dts | 30 ++++++++++++
.../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts | 18 ++++++++
.../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 3 --
15 files changed, 188 insertions(+), 17 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
rename arch/arm64/boot/dts/qcom/{sc7180-trogdor-lazor-limozeen-nots.dts => sc7180-trogdor-lazor-limozeen-nots-r9.dts} (60%)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
rename arch/arm64/boot/dts/qcom/{sc7180-trogdor-lazor-limozeen.dts => sc7180-trogdor-lazor-limozeen-r9.dts} (82%)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6b816eb33309..f637c4d3729f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -64,9 +64,14 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-kb.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
index 6ebde0828550..850776c5323d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
@@ -5,7 +5,7 @@
* Copyright 2020 Google LLC.
*/
-#include "sc7180-trogdor-lazor-limozeen-nots.dts"
+#include "sc7180-trogdor-lazor-limozeen-nots-r5.dts"
/ {
model = "Google Lazor Limozeen without Touchscreen (rev4)";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
new file mode 100644
index 000000000000..f360ff27226e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Lazor Limozeen without Touchscreen (rev5 - rev8)";
+ /* No sku5 post-rev5 */
+ compatible = "google,lazor-rev5-sku5", "google,lazor-rev5-sku6",
+ "google,lazor-rev6-sku6", "google,lazor-rev7-sku6",
+ "google,lazor-rev8-sku6", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&panel {
+ compatible = "innolux,n116bca-ea1", "innolux,n116bge";
+};
+
+&sdhc_2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
similarity index 60%
rename from arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dts
rename to arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
index 0456c7e05d00..4e35aec6a1e5 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
@@ -2,17 +2,19 @@
/*
* Google Lazor Limozeen board device tree source
*
- * Copyright 2020 Google LLC.
+ * Copyright 2021 Google LLC.
*/
/dts-v1/;
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
- model = "Google Lazor Limozeen without Touchscreen";
- compatible = "google,lazor-sku6", "google,lazor-sku5", "qcom,sc7180";
+ model = "Google Lazor Limozeen without Touchscreen (rev9+)";
+ compatible = "google,lazor-sku6", "qcom,sc7180";
};
/delete-node/&ap_ts;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
new file mode 100644
index 000000000000..42b4bbcc76f4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Lazor Limozeen (rev4 - rev8)";
+ compatible = "google,lazor-rev4-sku4", "google,lazor-rev5-sku4",
+ "google,lazor-rev6-sku4", "google,lazor-rev7-sku4",
+ "google,lazor-rev8-sku4", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&ap_ts_pen_1v8 {
+ ap_ts: touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc33-supply = <&pp3300_ts>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&panel {
+ compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
similarity index 82%
rename from arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dts
rename to arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
index e6ad6dae4e60..dc47842bc662 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
@@ -2,16 +2,18 @@
/*
* Google Lazor Limozeen board device tree source
*
- * Copyright 2020 Google LLC.
+ * Copyright 2021 Google LLC.
*/
/dts-v1/;
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
- model = "Google Lazor Limozeen";
+ model = "Google Lazor Limozeen (rev9+)";
compatible = "google,lazor-sku4", "qcom,sc7180";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index 30e3e769d2b4..b142006478ea 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -7,6 +7,8 @@
/dts-v1/;
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index c2ef06367baf..59740799fa3a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -7,6 +7,8 @@
/dts-v1/;
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
index dcb41afdc82a..18ef9da71998 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
@@ -7,12 +7,17 @@
/dts-v1/;
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-lite.dtsi"
/ {
- model = "Google Lazor (rev3+) with KB Backlight";
- compatible = "google,lazor-sku2", "qcom,sc7180";
+ model = "Google Lazor (rev3 - 8) with KB Backlight";
+ compatible = "google,lazor-rev3-sku2", "google,lazor-rev4-sku2",
+ "google,lazor-rev5-sku2", "google,lazor-rev6-sku2",
+ "google,lazor-rev7-sku2", "google,lazor-rev8-sku2",
+ "qcom,sc7180";
};
&keyboard_backlight {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
index be44900602d7..c5c9feff41b8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
@@ -7,12 +7,17 @@
/dts-v1/;
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
- model = "Google Lazor (rev3+) with LTE";
- compatible = "google,lazor-sku0", "qcom,sc7180";
+ model = "Google Lazor (rev3 - 8) with LTE";
+ compatible = "google,lazor-rev3-sku0", "google,lazor-rev4-sku0",
+ "google,lazor-rev5-sku0", "google,lazor-rev6-sku0",
+ "google,lazor-rev7-sku0", "google,lazor-rev8-sku0",
+ "qcom,sc7180";
};
&ap_sar_sensor {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
index b474df47cd70..7adcedbf080d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
@@ -7,10 +7,14 @@
/dts-v1/;
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-lite.dtsi"
/ {
- model = "Google Lazor (rev3+)";
- compatible = "google,lazor", "qcom,sc7180";
+ model = "Google Lazor (rev3 - 8)";
+ compatible = "google,lazor-rev3", "google,lazor-rev4",
+ "google,lazor-rev5", "google,lazor-rev6", "google,lazor-rev7",
+ "google,lazor-rev8", "qcom,sc7180";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
new file mode 100644
index 000000000000..7f5c015e1ecb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+ model = "Google Lazor (rev9+) with KB Backlight";
+ compatible = "google,lazor-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
new file mode 100644
index 000000000000..344b57c035d0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Lazor (rev9+) with LTE";
+ compatible = "google,lazor-sku0", "qcom,sc7180";
+};
+
+&ap_sar_sensor {
+ status = "okay";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
+
+&keyboard_backlight {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
new file mode 100644
index 000000000000..83f6a4eb5ae5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+ model = "Google Lazor (rev9+)";
+ compatible = "google,lazor", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 8b79fbb75756..69666f92176a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -5,13 +5,10 @@
* Copyright 2020 Google LLC.
*/
-#include "sc7180.dtsi"
-
ap_ec_spi: &spi6 {};
ap_h1_spi: &spi0 {};
#include "sc7180-trogdor.dtsi"
-#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
&ap_sar_sensor {
semtech,cs0-ground;
--
2.33.1.1089.g2158813163f-goog
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 4/4] arm64: dts: sc7180: Support Homestar rev4
2021-10-29 22:27 [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts Philip Chen
2021-10-29 22:27 ` [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output Philip Chen
2021-10-29 22:27 ` [PATCH v3 3/4] arm64: dts: sc7180: Support Lazor/Limozeen rev9 Philip Chen
@ 2021-10-29 22:27 ` Philip Chen
2021-11-20 23:55 ` [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts Bjorn Andersson
3 siblings, 0 replies; 12+ messages in thread
From: Philip Chen @ 2021-10-29 22:27 UTC (permalink / raw)
To: LKML
Cc: swboyd, dianders, Philip Chen, Andy Gross, Bjorn Andersson,
Rob Herring, devicetree, linux-arm-msm
Support Homestar rev4 board where Parade ps8640 is added as the
second source edp bridge.
Support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-homestar.dtsi"
to per-board-rev dts files.
Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-homestar.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
(no changes since v2)
Changes in v2:
- Explain why "sc7180.dtsi" is moved out of "sc7180-trogdor-homestar.dtsi"
in the commit message.
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/sc7180-trogdor-homestar-r2.dts | 2 ++
.../dts/qcom/sc7180-trogdor-homestar-r3.dts | 6 ++++--
.../dts/qcom/sc7180-trogdor-homestar-r4.dts | 17 +++++++++++++++++
.../boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 3 ---
5 files changed, 24 insertions(+), 5 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f637c4d3729f..ba99aba1d51a 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
index db6c2da67cea..70032983fb65 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
@@ -7,6 +7,8 @@
/dts-v1/;
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-homestar.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
index 3fd8aa5bb7a6..e92e2e9e48ed 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
@@ -7,9 +7,11 @@
/dts-v1/;
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-homestar.dtsi"
/ {
- model = "Google Homestar (rev3+)";
- compatible = "google,homestar", "qcom,sc7180";
+ model = "Google Homestar (rev3)";
+ compatible = "google,homestar-rev3", "qcom,sc7180";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
new file mode 100644
index 000000000000..fb27106bbb4a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-homestar.dtsi"
+
+/ {
+ model = "Google Homestar (rev4+)";
+ compatible = "google,homestar", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index 4ab890b2a1d4..f32369af1351 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -5,13 +5,10 @@
* Copyright 2021 Google LLC.
*/
-#include "sc7180.dtsi"
-
ap_ec_spi: &spi6 {};
ap_h1_spi: &spi0 {};
#include "sc7180-trogdor.dtsi"
-#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
/ {
/* BOARD-SPECIFIC TOP LEVEL NODES */
--
2.33.1.1089.g2158813163f-goog
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output
2021-10-29 22:27 ` [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output Philip Chen
@ 2021-10-29 23:16 ` Stephen Boyd
2021-10-29 23:24 ` Philip Chen
2021-11-01 17:09 ` Doug Anderson
2021-11-01 18:09 ` Stephen Boyd
2 siblings, 1 reply; 12+ messages in thread
From: Stephen Boyd @ 2021-10-29 23:16 UTC (permalink / raw)
To: LKML, Philip Chen
Cc: dianders, Andy Gross, Bjorn Andersson, Rob Herring, devicetree,
linux-arm-msm
Quoting Philip Chen (2021-10-29 15:27:41)
> MSM DSI host driver actually parses "data-lanes" in DT and compare
> it with the number of DSI lanes the bridge driver sets for
> mipi_dsi_device. So we need to always specify "data-lanes" for the
> DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
> fragment, but missing in parade-ps8640 dts fragment, which requires
> a fixup.
I don't see data-lanes required in the schema, and
dsi_host_parse_lane_data() seems happy to continue without it. I do see
that num_data_lanes isn't set though. Does this patch fix it?
----8<----
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
b/drivers/gpu/drm/msm/dsi/dsi_host.c
index e269df285136..f6fba07220e5 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -1696,6 +1696,7 @@ static int dsi_host_parse_lane_data(struct
msm_dsi_host *msm_host,
if (!prop) {
DRM_DEV_DEBUG(dev,
"failed to find data lane mapping, using default\n");
+ msm_host->num_data_lanes = 4;
return 0;
}
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output
2021-10-29 23:16 ` Stephen Boyd
@ 2021-10-29 23:24 ` Philip Chen
2021-10-29 23:35 ` Stephen Boyd
[not found] ` <e91a6134-c2ce-6112-0818-ffd9483feeeb@quicinc.com>
0 siblings, 2 replies; 12+ messages in thread
From: Philip Chen @ 2021-10-29 23:24 UTC (permalink / raw)
To: Stephen Boyd
Cc: LKML, dianders, Andy Gross, Bjorn Andersson, Rob Herring,
devicetree, linux-arm-msm
Hi Stephen,
On Fri, Oct 29, 2021 at 4:16 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Philip Chen (2021-10-29 15:27:41)
> > MSM DSI host driver actually parses "data-lanes" in DT and compare
> > it with the number of DSI lanes the bridge driver sets for
> > mipi_dsi_device. So we need to always specify "data-lanes" for the
> > DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
> > fragment, but missing in parade-ps8640 dts fragment, which requires
> > a fixup.
>
> I don't see data-lanes required in the schema, and
> dsi_host_parse_lane_data() seems happy to continue without it. I do see
> that num_data_lanes isn't set though. Does this patch fix it?
The problem I see is from dsi_host_attach().
If there is no "data-lanes" in DT, num_data_lanes would be 0.
Then dsi_host_attach() would return -EINVAL.
>
> ----8<----
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
> b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index e269df285136..f6fba07220e5 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -1696,6 +1696,7 @@ static int dsi_host_parse_lane_data(struct
> msm_dsi_host *msm_host,
> if (!prop) {
> DRM_DEV_DEBUG(dev,
> "failed to find data lane mapping, using default\n");
> + msm_host->num_data_lanes = 4;
> return 0;
> }
I haven't tried.
But I think it can fix the problem I described above.
Would you like to send it as a separate patch?
Or I can do it.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output
2021-10-29 23:24 ` Philip Chen
@ 2021-10-29 23:35 ` Stephen Boyd
[not found] ` <e91a6134-c2ce-6112-0818-ffd9483feeeb@quicinc.com>
1 sibling, 0 replies; 12+ messages in thread
From: Stephen Boyd @ 2021-10-29 23:35 UTC (permalink / raw)
To: Philip Chen
Cc: LKML, dianders, Andy Gross, Bjorn Andersson, Rob Herring,
devicetree, linux-arm-msm
Quoting Philip Chen (2021-10-29 16:24:58)
> Hi Stephen,
>
> On Fri, Oct 29, 2021 at 4:16 PM Stephen Boyd <swboyd@chromium.org> wrote:
> >
> > Quoting Philip Chen (2021-10-29 15:27:41)
> > > MSM DSI host driver actually parses "data-lanes" in DT and compare
> > > it with the number of DSI lanes the bridge driver sets for
> > > mipi_dsi_device. So we need to always specify "data-lanes" for the
> > > DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
> > > fragment, but missing in parade-ps8640 dts fragment, which requires
> > > a fixup.
> >
> > I don't see data-lanes required in the schema, and
> > dsi_host_parse_lane_data() seems happy to continue without it. I do see
> > that num_data_lanes isn't set though. Does this patch fix it?
> The problem I see is from dsi_host_attach().
> If there is no "data-lanes" in DT, num_data_lanes would be 0.
> Then dsi_host_attach() would return -EINVAL.
Ok, got it.
>
> >
> > ----8<----
> > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
> > b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > index e269df285136..f6fba07220e5 100644
> > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > @@ -1696,6 +1696,7 @@ static int dsi_host_parse_lane_data(struct
> > msm_dsi_host *msm_host,
> > if (!prop) {
> > DRM_DEV_DEBUG(dev,
> > "failed to find data lane mapping, using default\n");
> > + msm_host->num_data_lanes = 4;
> > return 0;
> > }
>
> I haven't tried.
> But I think it can fix the problem I described above.
> Would you like to send it as a separate patch?
> Or I can do it.
Sure feel free to send it as another patch. Or fix the schema to make
data-lanes required. I think fixing the driver is probably better so
that we don't have to set data-lanes when it's the default 4 lanes. At
least I think 4 lanes is the default.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output
[not found] ` <55f951c1-1713-ad55-4ca3-b83d4f3763f6@quicinc.com>
@ 2021-11-01 16:39 ` Philip Chen
0 siblings, 0 replies; 12+ messages in thread
From: Philip Chen @ 2021-11-01 16:39 UTC (permalink / raw)
To: Abhinav Kumar
Cc: Stephen Boyd, LKML, dianders, Andy Gross, Bjorn Andersson,
Rob Herring, devicetree, linux-arm-msm
Hi,
On Sun, Oct 31, 2021 at 7:52 PM Abhinav Kumar <quic_abhinavk@quicinc.com> wrote:
>
>
> On 10/31/2021 2:01 PM, Abhinav Kumar wrote:
>
> Hi Philip
>
> On 10/29/2021 4:24 PM, Philip Chen wrote:
>
> Hi Stephen,
>
> On Fri, Oct 29, 2021 at 4:16 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Philip Chen (2021-10-29 15:27:41)
>
> MSM DSI host driver actually parses "data-lanes" in DT and compare
> it with the number of DSI lanes the bridge driver sets for
> mipi_dsi_device. So we need to always specify "data-lanes" for the
> DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
> fragment, but missing in parade-ps8640 dts fragment, which requires
> a fixup.
>
> I don't see data-lanes required in the schema, and
> dsi_host_parse_lane_data() seems happy to continue without it. I do see
> that num_data_lanes isn't set though. Does this patch fix it?
>
> The problem I see is from dsi_host_attach().
> If there is no "data-lanes" in DT, num_data_lanes would be 0.
> Then dsi_host_attach() would return -EINVAL.
>
> Let me know if i am missing something here. the dsi_host_attach returns an error if
>
> dsi->lanes is > than msm_host->num_data_lanes. That shouldnt happen even if
>
> num_data_lanes will be 0
>
> static int dsi_host_attach(struct mipi_dsi_host *host,
> struct mipi_dsi_device *dsi)
> {
> struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
> int ret;
>
> if (dsi->lanes > msm_host->num_data_lanes)
> return -EINVAL;
>
> Thanks
>
> Abhinav
>
> Please ignore this comment, I understood now. The fix you had posted to default to 4 lanes seems fine.
>
> Will ack that one.
Thanks!
For the other folks: the fix I posted for dsi_host is here:
https://patchwork.kernel.org/project/linux-arm-msm/patch/20211030100812.1.I6cd9af36b723fed277d34539d3b2ba4ca233ad2d@changeid/
>
>
> ----8<----
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
> b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index e269df285136..f6fba07220e5 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -1696,6 +1696,7 @@ static int dsi_host_parse_lane_data(struct
> msm_dsi_host *msm_host,
> if (!prop) {
> DRM_DEV_DEBUG(dev,
> "failed to find data lane mapping, using default\n");
> + msm_host->num_data_lanes = 4;
> return 0;
> }
>
> I haven't tried.
> But I think it can fix the problem I described above.
> Would you like to send it as a separate patch?
> Or I can do it.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 3/4] arm64: dts: sc7180: Support Lazor/Limozeen rev9
2021-10-29 22:27 ` [PATCH v3 3/4] arm64: dts: sc7180: Support Lazor/Limozeen rev9 Philip Chen
@ 2021-11-01 17:09 ` Doug Anderson
0 siblings, 0 replies; 12+ messages in thread
From: Doug Anderson @ 2021-11-01 17:09 UTC (permalink / raw)
To: Philip Chen
Cc: LKML, Stephen Boyd, Andy Gross, Bjorn Andersson, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-msm
Hi,
On Fri, Oct 29, 2021 at 3:27 PM Philip Chen <philipchen@chromium.org> wrote:
>
> Support Lazor/Limozeen rev9 board where Parade ps8640 is added as the
> second source edp bridge.
>
> To support different edp bridge chips in different board revisions,
> now we move the #incldue line of the edp bridge dts fragment (e.g.
> sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-lazor.dtsi" to
> per-board-rev dts files.
>
> Since the edp bridge dts fragment overrides 'dsi0_out', which is
> defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
> "sc7180-trogdor-lazor.dtsi" to per-board-rev dts files too, before
> the #include line of the edp bridge dts fragment.
>
> Signed-off-by: Philip Chen <philipchen@chromium.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> ---
> Retroactively edit the v2 change log slightly
>
> (no changes since v2)
>
> Changes in v2:
> - Explain why "sc7180.dtsi" is moved out of "sc7180-trogdor-lazor.dtsi"
> in the commit message.
> - In limozeen (nots) r5 dts, replace "google,rev5-sku5" with
> "google,lazor-rev5-sku5" and sort it
> - In limozeen (nots) r9 dts, drop the support for "sku5".
> - In limozeen r4 dts, remove the redundant "google,lazor-rev6-sku4" and
> add "google,lazor-rev7-sku4".
> - Do not add panel compatible in -r9 dts files.
> - Move the #include line of gpio.h from sc7180.dtsi to the bridge dts
> fragments, and factor out this change to patch 1/3.
>
> arch/arm64/boot/dts/qcom/Makefile | 9 +++-
> .../sc7180-trogdor-lazor-limozeen-nots-r4.dts | 2 +-
> .../sc7180-trogdor-lazor-limozeen-nots-r5.dts | 31 +++++++++++++
> ...sc7180-trogdor-lazor-limozeen-nots-r9.dts} | 8 ++--
> .../qcom/sc7180-trogdor-lazor-limozeen-r4.dts | 46 +++++++++++++++++++
> ...s => sc7180-trogdor-lazor-limozeen-r9.dts} | 6 ++-
> .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 2 +
> .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 2 +
> .../dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 9 +++-
> .../dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 9 +++-
> .../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 8 +++-
> .../dts/qcom/sc7180-trogdor-lazor-r9-kb.dts | 22 +++++++++
> .../dts/qcom/sc7180-trogdor-lazor-r9-lte.dts | 30 ++++++++++++
> .../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts | 18 ++++++++
> .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 3 --
> 15 files changed, 188 insertions(+), 17 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
> rename arch/arm64/boot/dts/qcom/{sc7180-trogdor-lazor-limozeen-nots.dts => sc7180-trogdor-lazor-limozeen-nots-r9.dts} (60%)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
> rename arch/arm64/boot/dts/qcom/{sc7180-trogdor-lazor-limozeen.dts => sc7180-trogdor-lazor-limozeen-r9.dts} (82%)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
Reviewed-by: Douglas Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output
2021-10-29 22:27 ` [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output Philip Chen
2021-10-29 23:16 ` Stephen Boyd
@ 2021-11-01 17:09 ` Doug Anderson
2021-11-01 18:09 ` Stephen Boyd
2 siblings, 0 replies; 12+ messages in thread
From: Doug Anderson @ 2021-11-01 17:09 UTC (permalink / raw)
To: Philip Chen
Cc: LKML, Stephen Boyd, Andy Gross, Bjorn Andersson, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-msm
Hi,
On Fri, Oct 29, 2021 at 3:27 PM Philip Chen <philipchen@chromium.org> wrote:
>
> MSM DSI host driver actually parses "data-lanes" in DT and compare
> it with the number of DSI lanes the bridge driver sets for
> mipi_dsi_device. So we need to always specify "data-lanes" for the
> DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
> fragment, but missing in parade-ps8640 dts fragment, which requires
> a fixup.
>
> Since we'll do 4-lane DSI regardless of which bridge chip is used,
> instead of adding "data-lanes" to parade-ps8640 dts fragment, let's
> just move "data-lanes" from the bridge dts to sc7180-trogdor.dtsi.
>
> Signed-off-by: Philip Chen <philipchen@chromium.org>
> ---
>
> (no changes since v1)
>
> arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 1 -
> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 4 ++++
> 2 files changed, 4 insertions(+), 1 deletion(-)
I think it's fine to take this change even if we also decide to fix
the driver as well.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output
2021-10-29 22:27 ` [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output Philip Chen
2021-10-29 23:16 ` Stephen Boyd
2021-11-01 17:09 ` Doug Anderson
@ 2021-11-01 18:09 ` Stephen Boyd
2 siblings, 0 replies; 12+ messages in thread
From: Stephen Boyd @ 2021-11-01 18:09 UTC (permalink / raw)
To: LKML, Philip Chen
Cc: dianders, Andy Gross, Bjorn Andersson, Rob Herring, devicetree,
linux-arm-msm
Quoting Philip Chen (2021-10-29 15:27:41)
> MSM DSI host driver actually parses "data-lanes" in DT and compare
> it with the number of DSI lanes the bridge driver sets for
> mipi_dsi_device. So we need to always specify "data-lanes" for the
> DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
> fragment, but missing in parade-ps8640 dts fragment, which requires
> a fixup.
>
> Since we'll do 4-lane DSI regardless of which bridge chip is used,
> instead of adding "data-lanes" to parade-ps8640 dts fragment, let's
> just move "data-lanes" from the bridge dts to sc7180-trogdor.dtsi.
>
> Signed-off-by: Philip Chen <philipchen@chromium.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts
2021-10-29 22:27 [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts Philip Chen
` (2 preceding siblings ...)
2021-10-29 22:27 ` [PATCH v3 4/4] arm64: dts: sc7180: Support Homestar rev4 Philip Chen
@ 2021-11-20 23:55 ` Bjorn Andersson
3 siblings, 0 replies; 12+ messages in thread
From: Bjorn Andersson @ 2021-11-20 23:55 UTC (permalink / raw)
To: LKML, Philip Chen
Cc: linux-arm-msm, devicetree, Rob Herring, dianders, Andy Gross, swboyd
On Fri, 29 Oct 2021 15:27:40 -0700, Philip Chen wrote:
> The edp bridge dts fragment files use the macros defined in
> 'dt-bindings/gpio/gpio.h'.
>
> To help us more flexibly order the #include lines of dts files in a
> board-revision-specific dts file, let's include the gpio header in the
> bridge dts fragment files themselves.
>
> [...]
Applied, thanks!
[1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts
commit: 963070f762137cff817d33c102309ab0a345eb32
[2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output
commit: 0417a86b200b4da1dff73e9f4bd7743346e5565b
[3/4] arm64: dts: sc7180: Support Lazor/Limozeen rev9
commit: 7624b41b3379e664f074137001fc2e44bc1f5eaf
[4/4] arm64: dts: sc7180: Support Homestar rev4
commit: 3922ccaed4ac9dab5087fc5f20d319cc55765afa
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-11-20 23:56 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-29 22:27 [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts Philip Chen
2021-10-29 22:27 ` [PATCH v3 2/4] arm64: dts: sc7180: Specify "data-lanes" for DSI host output Philip Chen
2021-10-29 23:16 ` Stephen Boyd
2021-10-29 23:24 ` Philip Chen
2021-10-29 23:35 ` Stephen Boyd
[not found] ` <e91a6134-c2ce-6112-0818-ffd9483feeeb@quicinc.com>
[not found] ` <55f951c1-1713-ad55-4ca3-b83d4f3763f6@quicinc.com>
2021-11-01 16:39 ` Philip Chen
2021-11-01 17:09 ` Doug Anderson
2021-11-01 18:09 ` Stephen Boyd
2021-10-29 22:27 ` [PATCH v3 3/4] arm64: dts: sc7180: Support Lazor/Limozeen rev9 Philip Chen
2021-11-01 17:09 ` Doug Anderson
2021-10-29 22:27 ` [PATCH v3 4/4] arm64: dts: sc7180: Support Homestar rev4 Philip Chen
2021-11-20 23:55 ` [PATCH v3 1/4] arm64: dts: sc7180: Include gpio.h in edp bridge dts Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).