linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Masahiro Yamada <yamada.masahiro@socionext.com>,
	linux-mmc@vger.kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 1/2] mmc: sdhci: export sdhci_execute_tuning()
Date: Thu, 8 Dec 2016 13:49:39 +0200	[thread overview]
Message-ID: <1662520f-5605-8991-73b2-f75af5618a52@intel.com> (raw)
In-Reply-To: <1480903854-22701-2-git-send-email-yamada.masahiro@socionext.com>

On 05/12/16 04:10, Masahiro Yamada wrote:
> Some SDHCI-compat controllers support not only SD, but also eMMC,
> but they use different commands for tuning: CMD19 for SD, CMD21 for
> eMMC.
> 
> Due to the difference of the underlying mechanism, some controllers
> (at least, the Cadence IP is the case) provide their own registers
> for the eMMC tuning.
> 
> This commit will be useful when we want to override .execute_tuning
> callback (for eMMC HS200 tuning), but still let it fall back to
> sdhci_execute_tuning() for SD timing.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Adrian Hunter <adrian.hunter@intel.com>

> ---
> 
> I want to use this in the next commit.
> The Cadence IP supports eMMC as well as SD.
> 
> I want to re-use the sdhci_execute_tuning() for SD timing.
> 
> On the other hand, Cadence provides its own way for eMMC HS200 tuning;
> I need to touch some registers that are specific to Cadence's design.
> 
> 
> Changes in v4:
>   - export sdhci_execute_tuning() instead of using
>     execute_execute_tuning()
> 
> Changes in v3: None
> Changes in v2: None
> 
>  drivers/mmc/host/sdhci.c | 3 ++-
>  drivers/mmc/host/sdhci.h | 1 +
>  2 files changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 42ef3eb..0c03a89 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1948,7 +1948,7 @@ static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
>  	return 0;
>  }
>  
> -static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
>  {
>  	struct sdhci_host *host = mmc_priv(mmc);
>  	u16 ctrl;
> @@ -2141,6 +2141,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
>  	spin_unlock_irqrestore(&host->lock, flags);
>  	return err;
>  }
> +EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
>  
>  static int sdhci_select_drive_strength(struct mmc_card *card,
>  				       unsigned int max_dtr, int host_drv,
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 9c35776..786eee9 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -689,6 +689,7 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
>  void sdhci_set_bus_width(struct sdhci_host *host, int width);
>  void sdhci_reset(struct sdhci_host *host, u8 mask);
>  void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
> +int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
>  
>  #ifdef CONFIG_PM
>  extern int sdhci_suspend_host(struct sdhci_host *host);
> 

  reply	other threads:[~2016-12-08 11:54 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-05  2:10 [PATCH v4 0/2] mmc: sdhci: export sdhci_execute_tuning(), then add Cadence SDHCI driver Masahiro Yamada
2016-12-05  2:10 ` [PATCH v4 1/2] mmc: sdhci: export sdhci_execute_tuning() Masahiro Yamada
2016-12-08 11:49   ` Adrian Hunter [this message]
2016-12-08 11:53     ` Adrian Hunter
2016-12-08 12:31   ` Ulf Hansson
2016-12-05  2:10 ` [PATCH v4 2/2] mmc: sdhci-cadence: add Cadence SD4HC support Masahiro Yamada
2016-12-08 11:53   ` Adrian Hunter
2016-12-08 12:32   ` Ulf Hansson
2016-12-08 12:35     ` Masahiro Yamada
2016-12-08 12:52     ` Masahiro Yamada
2016-12-08 14:05       ` Ulf Hansson
2016-12-08 16:16         ` Masahiro Yamada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1662520f-5605-8991-73b2-f75af5618a52@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).