[PATCH net 1/1] stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz

[PATCH net 1/1] stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz

[Gan Yi Fang]

From: "Tan, Tee Min" <tee.min.tan@intel.com>

Current Intel platform has an output of ~976ms interval
when probed on 1 Pulse-per-Second(PPS) hardware pin.

The correct PTP clock frequency for PCH GbE should be 204.8MHz
instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz.

Fixes: 58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to contain all Intel platform")
Signed-off-by: Ling Pei Lee <pei.lee.ling@intel.com>
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 0a2afc1a3124..7deb1f817dac 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -629,7 +629,6 @@ static int ehl_common_data(struct pci_dev *pdev,
 {
 	plat->rx_queues_to_use = 8;
 	plat->tx_queues_to_use = 8;
-	plat->clk_ptp_rate = 200000000;
 	plat->use_phy_wol = 1;
 
 	plat->safety_feat_cfg->tsoee = 1;
@@ -654,6 +653,8 @@ static int ehl_sgmii_data(struct pci_dev *pdev,
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 
+	plat->clk_ptp_rate = 204800000;
+
 	return ehl_common_data(pdev, plat);
 }
 
@@ -667,6 +668,8 @@ static int ehl_rgmii_data(struct pci_dev *pdev,
 	plat->bus_id = 1;
 	plat->phy_interface = PHY_INTERFACE_MODE_RGMII;
 
+	plat->clk_ptp_rate = 204800000;
+
 	return ehl_common_data(pdev, plat);
 }
 
@@ -683,6 +686,8 @@ static int ehl_pse0_common_data(struct pci_dev *pdev,
 	plat->bus_id = 2;
 	plat->addr64 = 32;
 
+	plat->clk_ptp_rate = 200000000;
+
 	intel_mgbe_pse_crossts_adj(intel_priv, EHL_PSE_ART_MHZ);
 
 	return ehl_common_data(pdev, plat);
@@ -722,6 +727,8 @@ static int ehl_pse1_common_data(struct pci_dev *pdev,
 	plat->bus_id = 3;
 	plat->addr64 = 32;
 
+	plat->clk_ptp_rate = 200000000;
+
 	intel_mgbe_pse_crossts_adj(intel_priv, EHL_PSE_ART_MHZ);
 
 	return ehl_common_data(pdev, plat);
@@ -757,7 +764,7 @@ static int tgl_common_data(struct pci_dev *pdev,
 {
 	plat->rx_queues_to_use = 6;
 	plat->tx_queues_to_use = 4;
-	plat->clk_ptp_rate = 200000000;
+	plat->clk_ptp_rate = 204800000;
 	plat->speed_mode_2500 = intel_speed_mode_2500;
 
 	plat->safety_feat_cfg->tsoee = 1;
-- 
2.34.1

Re: [PATCH net 1/1] stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (master)
by Jakub Kicinski <kuba@kernel.org>:

On Mon,  7 Nov 2022 21:08:11 -0500 you wrote:
> From: "Tan, Tee Min" <tee.min.tan@intel.com>
> 
> Current Intel platform has an output of ~976ms interval
> when probed on 1 Pulse-per-Second(PPS) hardware pin.
> 
> The correct PTP clock frequency for PCH GbE should be 204.8MHz
> instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz.
> 
> [...]

Here is the summary with links:
  - [net,1/1] stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
    https://git.kernel.org/netdev/net/c/dcea1a8107c0

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html