linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Mattia Dongili" <malattia@linux.it>
To: "john stultz" <johnstul@us.ibm.com>
Cc: "Andrew Morton" <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: Re: first bisection results in -mm3 [was: Re: 2.6.15-mm2: reiser3  oops on suspend and more (bonus oops shot!)]
Date: Wed, 18 Jan 2006 11:47:15 +0100 (CET)	[thread overview]
Message-ID: <16839.83.103.117.254.1137581235.squirrel@picard.linux.it> (raw)
In-Reply-To: <20060117224951.GA3320@inferi.kami.home>

[-- Attachment #1: Type: text/plain, Size: 476 bytes --]

On Tue, January 17, 2006 11:49 pm, Mattia Dongili said:
[...]
> the stall is still there, tomorrow I'll reapply your debug-patch and
> report the full dmesg (with the finished_booting-hack enabled).

Full dmesg attached.
Stalls happened between in the 16.39-16.55 interval, in 16.70-16.96 and
17.89-18.64. They were all much longer than stated in the log timestamp
(I'd say ~10:1 ratio).

Sorry again for my previous false notice about the bug being solved...
-- 
mattia
:wq!

[-- Attachment #2: tsc_debug3 --]
[-- Type: application/octet-stream, Size: 23435 bytes --]

[    0.000000] Linux version 2.6.15-mm4-5 (mattia@inferi) (gcc version 4.0.3 20051201 (prerelease) (Debian 4.0.2-5)) #7 PREEMPT Wed Jan 18 09:18:17 CET 2006
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000c0000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
[    0.000000]  BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000000ff00000 - 000000000ff80000 (usable)
[    0.000000]  BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] 255MB LOWMEM available.
[    0.000000] On node 0 totalpages: 65408
[    0.000000]   DMA zone: 4096 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 0 pages, LIFO batch:0
[    0.000000]   Normal zone: 61312 pages, LIFO batch:15
[    0.000000]   HighMem zone: 0 pages, LIFO batch:0
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6cd0
[    0.000000] ACPI: RSDT (v001 SONY   C0       0x20010809 PTL  0x00000000) @ 0x0fefa88f
[    0.000000] ACPI: FADT (v001   SONY       C0 0x20010809 PTL  0x01000000) @ 0x0fefef64
[    0.000000] ACPI: BOOT (v001   SONY       C0 0x20010809 PTL  0x00000001) @ 0x0fefefd8
[    0.000000] ACPI: DSDT (v001   SONY       C0 0x20010809 PTL  0x0100000d) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000)
[    0.000000] Detected 994.318 MHz processor.
[    8.631380] Built 1 zonelists
[    8.631385] Local APIC disabled by BIOS -- reenabling.
[    8.631390] Found and enabled local APIC!
[    8.631396] mapped APIC to ffffd000 (fee00000)
[    8.631403] Enabling fast FPU save and restore... done.
[    8.631408] Enabling unmasked SIMD FPU exception support... done.
[    8.631414] Initializing CPU#0
[    8.631424] Kernel command line: root=/dev/hda1 ro vga=extended video=radeonfb:800x600-32@60 fbcon=font:Acorn8x8 lapic resume=/dev/hda2
[    8.631987] CPU 0 irqstacks, hard=c0414000 soft=c0415000
[    8.631995] PID hash table entries: 1024 (order: 10, 16384 bytes)
[    8.786692] Console: colour VGA+ 80x50
[    8.788159] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    8.788803] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    8.803489] Memory: 255120k/261632k available (2064k kernel code, 5892k reserved, 909k data, 152k init, 0k highmem)
[    8.803535] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    8.879782] Calibrating delay using timer specific routine.. 1989.91 BogoMIPS (lpj=3979838)
[    8.879925] Mount-cache hash table entries: 512
[    8.880137] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[    8.880151] CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[    8.880167] CPU: L1 I cache: 16K, L1 D cache: 16K
[    8.880240] CPU: L2 cache: 512K
[    8.880281] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[    8.880293] Intel machine check architecture supported.
[    8.880338] Intel machine check reporting enabled on CPU#0.
[    8.880391] mtrr: v2.0 (20020519)
[    8.880436] CPU: Intel(R) Pentium(R) III Mobile CPU      1000MHz stepping 01
[    8.880542] Checking 'hlt' instruction... OK.
[    8.898077]  tbxface-0109 [02] load_tables           : ACPI Tables successfully acquired
[    8.909718] Parsing all Control Methods:
[    8.910247] Table [DSDT](id 0005) - 555 Objects with 54 Devices 191 Methods 21 Regions
[    8.910338] ACPI Namespace successfully loaded at root c04471f8
[    8.944498] evxfevnt-0091 [03] enable                : Transition to ACPI mode successful
[    9.052205] NET: Registered protocol family 16
[    9.052279] ACPI: bus type pci registered
[    9.055840] PCI: PCI BIOS revision 2.10 entry at 0xfd9aa, last bus=2
[    9.055893] PCI: Using configuration type 1
[    9.056165] ACPI: Subsystem revision 20051216
[    9.058072] evgpeblk-0941 [06] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
[    9.058215] evgpeblk-0941 [06] ev_create_gpe_block   : GPE 10 to 1F [_GPE] 2 regs on int 0x9
[    9.059749] evgpeblk-1037 [05] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block
[    9.060611] evgpeblk-1037 [05] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block
[    9.065883] Completing Region/Field/Buffer/Package initialization:..............................................................
[    9.072937] Initialized 20/21 Regions 0/0 Fields 25/25 Buffers 17/27 Packages (564 nodes)
[    9.073026] Executing all Device _STA and_INI methods:..........................................................
[    9.083060] 58 Devices found containing: 3 _STA, 3 _INI methods
[    9.083168] ACPI: Interpreter enabled
[    9.083210] ACPI: Using PIC for interrupt routing
[    9.085069] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    9.085115] PCI: Probing PCI hardware (bus 00)
[    9.122694] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    9.122743] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[    9.122828] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[    9.123071] Boot video device is 0000:01:00.0
[    9.123309] PCI: Transparent bridge - 0000:00:1e.0
[    9.123428] PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[    9.123536] PCI: Bus #07 (-#0a) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[    9.123633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    9.141535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    9.144526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[    9.151731] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
[    9.195887] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[    9.197293] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
[    9.198754] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
[    9.200432] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[    9.202446] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[    9.204054] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0
[    9.205485] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[    9.206949] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled.
[    9.207738] Linux Plug and Play Support v0.97 (c) Adam Belay
[    9.207880] PCI: Using ACPI for IRQ routing
[    9.207925] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    9.213088] PCI: Bridge: 0000:00:01.0
[    9.213133]   IO window: 3000-3fff
[    9.213176]   MEM window: d0100000-d01fffff
[    9.213221]   PREFETCH window: d8000000-dfffffff
[    9.213280] PCI: Bus 3, cardbus bridge: 0000:02:05.0
[    9.213324]   IO window: 00004400-000044ff
[    9.213368]   IO window: 00004800-000048ff
[    9.213412]   PREFETCH window: 20000000-21ffffff
[    9.213456]   MEM window: 24000000-25ffffff
[    9.213500] PCI: Bus 7, cardbus bridge: 0000:02:05.1
[    9.213543]   IO window: 00004c00-00004cff
[    9.213586]   IO window: 00001400-000014ff
[    9.213630]   PREFETCH window: 22000000-23ffffff
[    9.213674]   MEM window: 26000000-27ffffff
[    9.213717] PCI: Bridge: 0000:00:1e.0
[    9.213759]   IO window: 4000-4fff
[    9.213804]   MEM window: d0200000-d02fffff
[    9.213848]   PREFETCH window: 20000000-23ffffff
[    9.213906] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    9.213969] **** SET: Misaligned resource pointer: cff4a7e2 Type 07 Len 0
[    9.215273] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
[    9.215321] PCI: setting IRQ 9 as level-triggered
[    9.215326] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
[    9.215441] PCI: Setting latency timer of device 0000:02:05.0 to 64
[    9.215489] **** SET: Misaligned resource pointer: cff4a7e2 Type 07 Len 0
[    9.216789] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
[    9.216834] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9
[    9.216949] PCI: Setting latency timer of device 0000:02:05.1 to 64
[    9.217040] Simple Boot Flag at 0x36 set to 0x1
[    9.218318] Initializing Cryptographic API
[    9.218366] io scheduler noop registered
[    9.218443] io scheduler anticipatory registered
[    9.218519] io scheduler deadline registered
[    9.218607] io scheduler cfq registered
[    9.218895] acpi_bus-0201 [01] bus_set_power         : Device is not power manageable
[    9.219059] **** SET: Misaligned resource pointer: cff4a2e2 Type 07 Len 0
[    9.220461] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[    9.220507] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[    9.231538] radeonfb: Retrieved PLL infos from BIOS
[    9.231584] radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
[    9.231638] radeonfb: PLL min 12000 max 35000
[   10.166710] Non-DDC laptop panel detected
[   11.161878] radeonfb: Monitor 1 type LCD found
[   11.161921] radeonfb: Monitor 2 type no found
[   11.161968] radeonfb: panel ID string: Samsung LTN150P1-L02    
[   11.162012] radeonfb: detected LVDS panel size from BIOS: 1400x1050
[   11.162058] radeondb: BIOS provided dividers will be used
[   11.397680] radeonfb: Dynamic Clock Power Management enabled
[   11.669463] Console: switching to colour frame buffer device 100x75
[   11.670323] radeonfb (0000:01:00.0): ATI Radeon LY 
[   11.672863] ACPI: AC Adapter [ACAD] (on-line)
[   11.681840] ACPI: Battery Slot [BAT1] (battery present)
[   11.684163] ACPI: Battery Slot [BAT2] (battery absent)
[   11.684285] ACPI: Lid Switch [LID]
[   11.684372] ACPI: Power Button (CM) [PWRB]
[   11.684705] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   11.691816] ACPI: Thermal Zone [ATF0] (40 C)
[   11.691940] isapnp: Scanning for PnP cards...
[   12.045476] isapnp: No Plug & Play device found
[   12.082129] PNP: No PS/2 controller found. Probing ports directly.
[   12.083959] serio: i8042 AUX port at 0x60,0x64 irq 12
[   12.084201] serio: i8042 KBD port at 0x60,0x64 irq 1
[   12.084462] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   12.084587] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   12.084777] ICH3M: IDE controller at PCI slot 0000:00:1f.1
[   12.084896] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   12.085037]  pci_irq-0384 [02] pci_irq_derive        : Unable to derive IRQ for device 0000:00:1f.1
[   12.085238] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
[   12.085361] ICH3M: chipset revision 1
[   12.085436] ICH3M: not 100% native mode: will probe irqs later
[   12.085558]     ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
[   12.085733]     ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
[   12.085904] Probing IDE interface ide0...
[   12.095842] hda: FUJITSU MHV2080AH, ATA DISK drive
[   12.107195] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   12.113211] Probing IDE interface ide1...
[   12.123527] Probing IDE interface ide1...
[   12.133830] hda: max request size: 128KiB
[   12.140096] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[   12.146243] hda: cache flushes supported
[   12.152330]  hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[   12.159358] mice: PS/2 mouse device common for all mice
[   12.165531] NET: Registered protocol family 2
[   12.172577] input: AT Translated Set 2 keyboard as /class/input/input0
[   12.178870] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   12.185284] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[   12.191684] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[   12.198141] TCP: Hash tables configured (established 16384 bind 16384)
[   12.204508] TCP reno registered
[   12.210985] TCP bic registered
[   12.217320] NET: Registered protocol family 1
[   12.223676] NET: Registered protocol family 17
[   12.230014] Using IPI Shortcut mode
[   12.240275] Time: tsc clocksource has been installed.
[   12.246582] TSC clocksource: 994318 khz, rating=300 mult=4218272 shift=22
[   12.264722] ACPI wakeup devices: 
[   12.271018] PWRB USB1 USB2 USB3 CRD0 CRD1  LAN  EC0 COMA MODE 
[   12.277449] ACPI: (supports S0 S3 S4 S5)
[   12.284401] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[   12.291871] check_periodic_interval: short interval! 719401 ns.
[   12.298153] 		bad calibration or timers may be broken.
[   12.305171] check_periodic_interval: short interval! 13311470 ns.
[   12.311412] 		bad calibration or timers may be broken.
[   12.318309] check_periodic_interval: short interval! 13148760 ns.
[   12.324617] 		bad calibration or timers may be broken.
[   12.331078] ReiserFS: hda1: using ordered data mode
[   12.337713] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   12.353248] ReiserFS: hda1: checking transaction log (hda1)
[   12.360430] check_periodic_interval: short interval! 42152576 ns.
[   12.366933] 		bad calibration or timers may be broken.
[   12.373614] ReiserFS: hda1: Using r5 hash to sort names
[   12.380132] VFS: Mounted root (reiserfs filesystem) readonly.
[   12.386793] Freeing unused kernel memory: 152k freed
[   12.393878] check_periodic_interval: short interval! 33477490 ns.
[   12.400293] 		bad calibration or timers may be broken.
[   12.407536] check_periodic_interval: short interval! 13670561 ns.
[   12.413919] 		bad calibration or timers may be broken.
[   12.421472] check_periodic_interval: short interval! 13947236 ns.
[   12.427924] 		bad calibration or timers may be broken.
[   12.435267] check_periodic_interval: short interval! 13807432 ns.
[   12.441799] 		bad calibration or timers may be broken.
[   12.469100] check_periodic_interval: short interval! 33860447 ns.
[   12.475654] 		bad calibration or timers may be broken.
[   12.483426] check_periodic_interval: short interval! 14337876 ns.
[   12.490003] 		bad calibration or timers may be broken.
[   13.999941] Linux agpgart interface v0.101 (c) Dave Jones
[   14.028737] hw_random hardware driver 1.0.0 loaded
[   14.043621] agpgart: Detected an Intel 830M Chipset.
[   14.065200] agpgart: AGP aperture is 256M @ 0xe0000000
[   14.147734] usbcore: registered new driver usbfs
[   14.154771] usbcore: registered new driver hub
[   14.181856] USB Universal Host Controller Interface driver v3.0
[   14.189178] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[   14.196240] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   14.196248] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   14.203464] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   14.210479] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001800
[   14.217553] usb usb1: configuration #1 chosen from 1 choice
[   14.224520] hub 1-0:1.0: USB hub found
[   14.231371] hub 1-0:1.0: 2 ports detected
[   14.340115] **** SET: Misaligned resource pointer: cf4e7c02 Type 07 Len 0
[   14.348433] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[   14.355250] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[   14.362182] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   14.362189] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   14.369231] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   14.376199] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001820
[   14.383235] usb usb2: configuration #1 chosen from 1 choice
[   14.390184] hub 2-0:1.0: USB hub found
[   14.397102] hub 2-0:1.0: 2 ports detected
[   14.497911] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[   14.505305] e100: Copyright(c) 1999-2005 Intel Corporation
[   14.515971] **** SET: Misaligned resource pointer: cf4e7f02 Type 07 Len 0
[   14.524302] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[   14.531202] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[   14.538196] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   14.538203] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   14.545406] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   14.552365] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001840
[   14.559396] usb usb3: configuration #1 chosen from 1 choice
[   14.566333] hub 3-0:1.0: USB hub found
[   14.573204] hub 3-0:1.0: 2 ports detected
[   14.683878] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
[   14.690986] **** SET: Misaligned resource pointer: cf60fd22 Type 07 Len 0
[   14.699421] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[   14.706515] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[   14.713706] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   14.935449] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   15.115875] usb 3-1: configuration #1 chosen from 1 choice
[   15.279149] intel8x0_measure_ac97_clock: measured 55462 usecs
[   15.286308] intel8x0: clocking to 48000
[   15.294430] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
[   15.301680] Yenta: CardBus bridge found at 0000:02:05.0 [104d:80e7]
[   15.435694] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[   15.442944] Socket status: 30000006
[   15.450059] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[   15.457246] cs: IO port probe 0x4000-0x4fff: clean.
[   15.464826] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[   15.472015] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
[   15.480284] acpi_bus-0201 [01] bus_set_power         : Device is not power manageable
[   15.487591] **** SET: Misaligned resource pointer: cf074ea2 Type 07 Len 0
[   15.496111] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
[   15.503207] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
[   15.532651] e100: eth0: e100_probe: addr 0xd0204000, irq 9, MAC addr 08:00:46:26:50:59
[   15.539859] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9
[   15.547146] Yenta: CardBus bridge found at 0000:02:05.1 [104d:80e7]
[   15.679500] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[   15.686946] Socket status: 30000006
[   15.694386] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[   15.701804] cs: IO port probe 0x4000-0x4fff: clean.
[   15.709625] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[   15.717071] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
[   16.310253] SCSI subsystem initialized
[   16.348030] Initializing USB Mass Storage driver...
[   16.362211] scsi0 : SCSI emulation for USB Mass Storage devices
[   16.380598] usb-storage: device found at 2
[   16.380605] usb-storage: waiting for device to settle before scanning
[   16.380625] usbcore: registered new driver usb-storage
[   16.397385] USB Mass Storage support registered.
[   16.557599]   Vendor: Sony      Model: MSC-U02           Rev: 1.00
[   16.565673]   Type:   Direct-Access                      ANSI SCSI revision: 00
[   16.579947] usb-storage: device scan complete
[   16.614182] SCSI device sda: 7904 512-byte hdwr sectors (4 MB)
[   16.622514] sda: Write Protect is off
[   16.630120] sda: Mode Sense: 00 6a 10 00
[   16.630125] sda: assuming drive cache: write through
[   16.642562] SCSI device sda: 7904 512-byte hdwr sectors (4 MB)
[   16.650839] sda: Write Protect is off
[   16.658321] sda: Mode Sense: 00 6a 10 00
[   16.658326] sda: assuming drive cache: write through
[   16.666813]  sda: sda1
[   16.702850] sd 0:0:0:0: Attached scsi removable disk sda
[   16.961755] Adding 248996k swap on /dev/hda2.  Priority:-1 extents:1 across:248996k
[   17.126843] usbcore: registered new driver usbhid
[   17.133694] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   17.206060] input: PC Speaker as /class/input/input1
[   17.262681] speedstep: frequency transition measured seems out of range (6000 nSec), falling back to a safe one of 500000 nSec.
[   17.295894] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   17.307821] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[   17.321375] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[   17.328261] sonypi: device allocated minor is 63
[   17.349579] input: Sony Vaio Jogdial as /class/input/input2
[   17.384974] input: Sony Vaio Keys as /class/input/input3
[   17.443741] tun: Universal TUN/TAP device driver, 1.6
[   17.450555] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   17.477625] ACPI Sony Notebook Control Driver v0.2 successfully installed
[   17.499560] Real Time Clock Driver v1.12ac
[   17.554085] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2548b1, caps: 0x804753/0x0
[   17.570593] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[   17.600863] do_settimeofday() was called!
[   17.612609] do_settimeofday() was called!
[   17.797328] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
[   17.817228] ReiserFS: hda3: using ordered data mode
[   17.823815] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   17.838976] ReiserFS: hda3: checking transaction log (hda3)
[   17.846130] ReiserFS: hda3: Using r5 hash to sort names
[   17.875271] SGI XFS with ACLs, security attributes, no debug enabled
[   17.884069] XFS mounting filesystem hda6
[   17.895108] Ending clean XFS mount for filesystem: hda6
[   18.643073] do_settimeofday() was called!
[   26.526150] TSC: Marked unstable
[   26.532502]  [<c0103bb3>] show_trace+0x13/0x20
[   26.538762]  [<c0103bde>] dump_stack+0x1e/0x20
[   26.544963]  [<c0108b77>] mark_tsc_unstable+0x27/0x40
[   26.551167]  [<c01090fb>] time_cpufreq_notifier+0x19b/0x1b0
[   26.557370]  [<c0127e3d>] notifier_call_chain+0x2d/0x50
[   26.563575]  [<c029b60c>] cpufreq_notify_transition+0x13c/0x170
[   26.569779]  [<d120b3c0>] speedstep_target+0xd0/0xe0 [speedstep_ich]
[   26.576081]  [<c029b207>] __cpufreq_driver_target+0x77/0x80
[   26.582368]  [<d12025ee>] do_dbs_timer+0x13e/0x200 [cpufreq_ondemand]
[   26.588682]  [<c012b1da>] run_workqueue+0x9a/0x140
[   26.594943]  [<c012b477>] worker_thread+0x107/0x140
[   26.601138]  [<c012eaa9>] kthread+0xd9/0xe0
[   26.607265]  [<c0101005>] kernel_thread_helper+0x5/0x10
[   42.492000] Time: acpi_pm clocksource has been installed.
[   44.532000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   44.660000] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 232 bytes per conntrack
[   45.008000] e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
[   48.128000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

  reply	other threads:[~2006-01-18 10:47 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-01-10 23:55 2.6.15-mm2: reiser3 oops on suspend and more (bonus oops shot!) Mattia Dongili
2006-01-11  1:00 ` Andrew Morton
2006-01-11 10:00   ` Pavel Machek
2006-01-11 11:24     ` Mattia Dongili
2006-01-11 18:40     ` Mattia Dongili
2006-01-12 22:08       ` first bisection results in -mm3 [was: Re: 2.6.15-mm2: reiser3 oops on suspend and more (bonus oops shot!)] Mattia Dongili
2006-01-12 23:26         ` john stultz
2006-01-14 12:08           ` Mattia Dongili
2006-01-16 20:16             ` john stultz
2006-01-16 20:40               ` Mattia Dongili
2006-01-16 21:42                 ` john stultz
2006-01-16 22:19                   ` Andi Kleen
2006-01-16 22:41                     ` john stultz
2006-01-17 16:43                   ` Mattia Dongili
2006-01-17 16:45                   ` Mattia Dongili
2006-01-17  0:49                 ` john stultz
2006-01-17 17:49                   ` Mattia Dongili
2006-01-17 19:11                     ` john stultz
2006-01-17 22:49                       ` Mattia Dongili
2006-01-18 10:47                         ` Mattia Dongili [this message]
2006-01-24 22:27                           ` john stultz
2006-01-24 23:04                             ` Mattia Dongili
2006-01-24 23:48                               ` john stultz
2006-01-25  0:12                                 ` john stultz
2006-01-25 18:12                                   ` Mattia Dongili
2006-01-11 10:02   ` 2.6.15-mm2: reiser3 oops on suspend and more (bonus oops shot!) Pavel Machek
2006-01-11 14:27   ` Mattia Dongili
2006-01-15 22:14   ` 2.6.15-mm3 bisection: git-xfs.patch makes reiserfs oops Mattia Dongili
2006-01-15 22:48     ` Nathan Scott
2006-01-15 23:22       ` Mattia Dongili
2006-01-16  9:29       ` Hans Reiser
2006-01-16 11:48         ` Christoph Hellwig
2006-01-16 15:50           ` Mattia Dongili
2006-01-17  3:27           ` Hans Reiser
2006-01-16 11:51         ` Mattia Dongili

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=16839.83.103.117.254.1137581235.squirrel@picard.linux.it \
    --to=malattia@linux.it \
    --cc=akpm@osdl.org \
    --cc=johnstul@us.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).