* Fwd: Antwort: Re: vUDC [not found] <OF3824F794.22BECE87-ONC1258084.002BBF3A-C1258084.002BF397@LocalDomain> @ 2016-12-09 8:43 ` Krzysztof Opasiak 2016-12-09 14:43 ` Shuah Khan 0 siblings, 1 reply; 3+ messages in thread From: Krzysztof Opasiak @ 2016-12-09 8:43 UTC (permalink / raw) To: elen.niedermeyer Cc: Shuah Khan, linux-usb, kernelnewbies, linux-kernel, shuahkh, Shuah Khan FYI to the list for next generations;) -------- Forwarded Message -------- Subject: Antwort: Re: vUDC Date: Fri, 9 Dec 2016 09:00:04 +0100 From: Elen Niedermeyer <elen.niedermeyer@biotronik.com> To: Krzysztof Opasiak <k.opasiak@samsung.com> Hi, so your script solved my problem. I didn't know that I should start the daemon with 'usbipd --device' after starting my emulation. I've tried it with 'usbip -d' and then bind my device with 'usbip bind -b BUSID'. But there wasn't listet a device by usbip with 'usbip list -l', so I didn't know what I have to bind. Mit freundlichen Grüßen Kind regards, i.A. Elen Niedermeyer Duale Studentin Informatik __________________________ BIOTRONIK SE & Co. KG Woermannkehre 1 12359 Berlin, Germany Phone: +49 (0) 30 68905-2459 Fax: +49 (0) 30 68905 2940 Mail: elen.niedermeyer@biotronik.com -----Krzysztof Opasiak <k.opasiak@samsung.com> schrieb: ----- An: Shuah Khan <shuahkhan@gmail.com>, Elen Niedermeyer <elen.niedermeyer@biotronik.com> Von: Krzysztof Opasiak <k.opasiak@samsung.com> Datum: 08.12.2016 16:11 Kopie: linux-usb@vger.kernel.org, kernelnewbies@nl.linux.org, LKML <linux-kernel@vger.kernel.org>, shuah@kernel.org Betreff: Re: vUDC Hi, On 12/08/2016 03:33 PM, Shuah Khan wrote: > Hi Elen, > > Adding k.opasiak@samsung.com > > On Thu, Dec 8, 2016 at 7:07 AM, Elen Niedermeyer > <elen.niedermeyer@biotronik.com> wrote: >> Dear Sir or Madam, >> >> I'm trying to run usbip-vudc since a few days. I want to access my emulated usb devices over usbip. >> I use Ubuntu 16.04.01 and updated my kernel to version 4.8.0-30. I've installed linux-tools-4.8.0-30-generic which includes usbip. I enabled the modules usbip-host and usbip-vudc on the server. Futhermore I use configfs to emulate the usb devices. >> So I could start the daemon and my emulation. But I can't detect my emulated usb device with usbip to bind it. >> Could you help me to run usbip-vudc? Do I have to install an additional package? Do I miss a step? >> >> Mit freundlichen Grüßen >> Kind regards, > > Could you please send your dmesg? Also could you run usbipd with > --debug and usbip with --log option and send the syslog > > Krzysztof, > You setup script should look like this: Server: $ modprobe usbip-vudc # Create your gadget, for example: $ cd /sys/kernel/config/usb_gadget $ mkdir g1 $ mkdir g1/functions/acm.ser0 $ mkdir g1/configs/c.1 $ ln -s g1/functions/acm.ser0 g1/configs/c.1 $ echo "0x1234" > g1/idVendor $ echo "0x5678" > g1/idProduct $ echo usbip-vudc.0 > UDC $ usbipd --device Client: $ modprobe usbip-vhci $ usbip attach -r $SERVER_IP -d usbip-vudc.0 Please let me know if your setup script is similar and what exactly is not working for you. > Any ideas. Maybe it is time the documentation is updated with vudc details. > Yes I think it's a good idea. I'll try to do this when I have some spare time. Best regards, -- Krzysztof Opasiak Samsung R&D Institute Poland Samsung Electronics www.biotronik.com BIOTRONIK - excellence for life BIOTRONIK SE & Co. KG Woermannkehre 1, 12359 Berlin, Germany Sitz der Gesellschaft: Berlin, Registergericht: Berlin HRA 6501 Vertreten durch ihre Komplementärin: BIOTRONIK MT SE Sitz der Gesellschaft: Berlin, Registergericht: Berlin HRB 118866 B Geschäftsführende Direktoren: Dr. Lothar Krings, Joachim Langer, Dr. Ralf Lieb, Thomas Simmerer This e-mail and the information it contains including attachments are confidential and meant only for use by the intended recipient(s); disclosure or copying is strictly prohibited. If you are not addressed, but in the possession of this e-mail, please notify the sender immediately and delete the document. ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Fwd: Antwort: Re: vUDC 2016-12-09 8:43 ` Fwd: Antwort: Re: vUDC Krzysztof Opasiak @ 2016-12-09 14:43 ` Shuah Khan 2016-12-09 17:12 ` Krzysztof Opasiak 0 siblings, 1 reply; 3+ messages in thread From: Shuah Khan @ 2016-12-09 14:43 UTC (permalink / raw) To: Krzysztof Opasiak, elen.niedermeyer Cc: Shuah Khan, linux-usb, kernelnewbies, linux-kernel, shuahkh, Shuah Khan Hi Krzysztof, On 12/09/2016 01:43 AM, Krzysztof Opasiak wrote: > FYI to the list for next generations;) > > > -------- Forwarded Message -------- > Subject: Antwort: Re: vUDC > Date: Fri, 9 Dec 2016 09:00:04 +0100 > From: Elen Niedermeyer <elen.niedermeyer@biotronik.com> > To: Krzysztof Opasiak <k.opasiak@samsung.com> > > > Hi, > > so your script solved my problem. I didn't know that I should start the > daemon with 'usbipd --device' after starting my emulation. I've tried it > with 'usbip -d' and then bind my device with 'usbip bind -b BUSID'. But > there wasn't listet a device by usbip with 'usbip list -l', so I didn't > know what I have to bind. Mit freundlichen Grüßen > Kind regards, > > i.A. Elen Niedermeyer > Duale Studentin Informatik > __________________________ > > BIOTRONIK SE & Co. KG > Woermannkehre 1 > 12359 Berlin, Germany > > Phone: +49 (0) 30 68905-2459 > Fax: +49 (0) 30 68905 2940 > Mail: elen.niedermeyer@biotronik.com > > -----Krzysztof Opasiak <k.opasiak@samsung.com> schrieb: ----- > An: Shuah Khan <shuahkhan@gmail.com>, Elen Niedermeyer > <elen.niedermeyer@biotronik.com> > Von: Krzysztof Opasiak <k.opasiak@samsung.com> > Datum: 08.12.2016 16:11 > Kopie: linux-usb@vger.kernel.org, kernelnewbies@nl.linux.org, LKML > <linux-kernel@vger.kernel.org>, shuah@kernel.org > Betreff: Re: vUDC > > Hi, > > On 12/08/2016 03:33 PM, Shuah Khan wrote: >> Hi Elen, >> >> Adding k.opasiak@samsung.com >> >> On Thu, Dec 8, 2016 at 7:07 AM, Elen Niedermeyer >> <elen.niedermeyer@biotronik.com> wrote: >>> Dear Sir or Madam, >>> >>> I'm trying to run usbip-vudc since a few days. I want to access my emulated usb devices over usbip. >>> I use Ubuntu 16.04.01 and updated my kernel to version 4.8.0-30. I've installed linux-tools-4.8.0-30-generic which includes usbip. I enabled the modules usbip-host and usbip-vudc on the server. Futhermore I use configfs to emulate the usb devices. >>> So I could start the daemon and my emulation. But I can't detect my emulated usb device with usbip to bind it. >>> Could you help me to run usbip-vudc? Do I have to install an additional package? Do I miss a step? >>> >>> Mit freundlichen Grüßen >>> Kind regards, >> >> Could you please send your dmesg? Also could you run usbipd with >> --debug and usbip with --log option and send the syslog >> >> Krzysztof, >> > > You setup script should look like this: > > Server: > $ modprobe usbip-vudc > # Create your gadget, for example: > $ cd /sys/kernel/config/usb_gadget > $ mkdir g1 > $ mkdir g1/functions/acm.ser0 > $ mkdir g1/configs/c.1 > $ ln -s g1/functions/acm.ser0 g1/configs/c.1 > $ echo "0x1234" > g1/idVendor > $ echo "0x5678" > g1/idProduct > $ echo usbip-vudc.0 > UDC > $ usbipd --device > > Client: > $ modprobe usbip-vhci > $ usbip attach -r $SERVER_IP -d usbip-vudc.0 > > Please let me know if your setup script is similar and what exactly is I would be good to create server_sample.sh and client_sample.sh and add them to tools/usb/usbip - users can customize them. What do you think? Is this something you have time for? thanks, -- Shuah ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Fwd: Antwort: Re: vUDC 2016-12-09 14:43 ` Shuah Khan @ 2016-12-09 17:12 ` Krzysztof Opasiak 0 siblings, 0 replies; 3+ messages in thread From: Krzysztof Opasiak @ 2016-12-09 17:12 UTC (permalink / raw) To: shuah, elen.niedermeyer Cc: Shuah Khan, linux-usb, kernelnewbies, linux-kernel, shuahkh On 12/09/2016 03:43 PM, Shuah Khan wrote: > Hi Krzysztof, > > On 12/09/2016 01:43 AM, Krzysztof Opasiak wrote: >> FYI to the list for next generations;) >> >> >> -------- Forwarded Message -------- >> Subject: Antwort: Re: vUDC >> Date: Fri, 9 Dec 2016 09:00:04 +0100 >> From: Elen Niedermeyer <elen.niedermeyer@biotronik.com> >> To: Krzysztof Opasiak <k.opasiak@samsung.com> >> >> >> Hi, >> >> so your script solved my problem. I didn't know that I should start the >> daemon with 'usbipd --device' after starting my emulation. I've tried it >> with 'usbip -d' and then bind my device with 'usbip bind -b BUSID'. But >> there wasn't listet a device by usbip with 'usbip list -l', so I didn't >> know what I have to bind. Mit freundlichen Grüßen >> Kind regards, >> >> i.A. Elen Niedermeyer >> Duale Studentin Informatik >> __________________________ >> >> BIOTRONIK SE & Co. KG >> Woermannkehre 1 >> 12359 Berlin, Germany >> >> Phone: +49 (0) 30 68905-2459 >> Fax: +49 (0) 30 68905 2940 >> Mail: elen.niedermeyer@biotronik.com >> >> -----Krzysztof Opasiak <k.opasiak@samsung.com> schrieb: ----- >> An: Shuah Khan <shuahkhan@gmail.com>, Elen Niedermeyer >> <elen.niedermeyer@biotronik.com> >> Von: Krzysztof Opasiak <k.opasiak@samsung.com> >> Datum: 08.12.2016 16:11 >> Kopie: linux-usb@vger.kernel.org, kernelnewbies@nl.linux.org, LKML >> <linux-kernel@vger.kernel.org>, shuah@kernel.org >> Betreff: Re: vUDC >> >> Hi, >> >> On 12/08/2016 03:33 PM, Shuah Khan wrote: >>> Hi Elen, >>> >>> Adding k.opasiak@samsung.com >>> >>> On Thu, Dec 8, 2016 at 7:07 AM, Elen Niedermeyer >>> <elen.niedermeyer@biotronik.com> wrote: >>>> Dear Sir or Madam, >>>> >>>> I'm trying to run usbip-vudc since a few days. I want to access my emulated usb devices over usbip. >>>> I use Ubuntu 16.04.01 and updated my kernel to version 4.8.0-30. I've installed linux-tools-4.8.0-30-generic which includes usbip. I enabled the modules usbip-host and usbip-vudc on the server. Futhermore I use configfs to emulate the usb devices. >>>> So I could start the daemon and my emulation. But I can't detect my emulated usb device with usbip to bind it. >>>> Could you help me to run usbip-vudc? Do I have to install an additional package? Do I miss a step? >>>> >>>> Mit freundlichen Grüßen >>>> Kind regards, >>> >>> Could you please send your dmesg? Also could you run usbipd with >>> --debug and usbip with --log option and send the syslog >>> >>> Krzysztof, >>> >> >> You setup script should look like this: >> >> Server: >> $ modprobe usbip-vudc >> # Create your gadget, for example: >> $ cd /sys/kernel/config/usb_gadget >> $ mkdir g1 >> $ mkdir g1/functions/acm.ser0 >> $ mkdir g1/configs/c.1 >> $ ln -s g1/functions/acm.ser0 g1/configs/c.1 >> $ echo "0x1234" > g1/idVendor >> $ echo "0x5678" > g1/idProduct >> $ echo usbip-vudc.0 > UDC >> $ usbipd --device >> >> Client: >> $ modprobe usbip-vhci >> $ usbip attach -r $SERVER_IP -d usbip-vudc.0 >> >> Please let me know if your setup script is similar and what exactly is > > I would be good to create server_sample.sh and client_sample.sh and add > them to tools/usb/usbip - users can customize them. > > What do you think? Is this something you have time for? > I have just created one. Patch is on the list[1]. Footnotes: 1 - http://marc.info/?l=linux-usb&m=148130330315109&w=2 Cheers, -- Krzysztof Opasiak Samsung R&D Institute Poland Samsung Electronics ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-12-09 17:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <OF3824F794.22BECE87-ONC1258084.002BBF3A-C1258084.002BF397@LocalDomain>
2016-12-09 8:43 ` Fwd: Antwort: Re: vUDC Krzysztof Opasiak
2016-12-09 14:43 ` Shuah Khan
2016-12-09 17:12 ` Krzysztof Opasiak
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).