From: Hans Verkuil <hverkuil@xs4all.nl>
To: Sergey Senozhatsky <senozhatsky@chromium.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Tomasz Figa <tfiga@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Sakari Ailus <sakari.ailus@iki.fi>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Pawel Osciak <posciak@chromium.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCHv4 01/11] videobuf2: add cache management members
Date: Fri, 6 Mar 2020 14:57:07 +0100 [thread overview]
Message-ID: <17060663-9c30-de5e-da58-0c847b93e4d3@xs4all.nl> (raw)
In-Reply-To: <20200302041213.27662-2-senozhatsky@chromium.org>
On 02/03/2020 05:12, Sergey Senozhatsky wrote:
> Extend vb2_buffer and vb2_queue structs with cache management
> members.
>
> V4L2 UAPI already contains two buffer flags which user-space,
> supposedly, can use to control buffer cache sync:
>
> - V4L2_BUF_FLAG_NO_CACHE_INVALIDATE
> - V4L2_BUF_FLAG_NO_CACHE_CLEAN
>
> None of these, however, do anything at the moment. This patch
> set is intended to change it.
>
> Since user-space cache management hints are supposed to be
> implemented on a per-buffer basis we need to extend vb2_buffer
> struct with two new members ->need_cache_sync_on_prepare and
> ->need_cache_sync_on_finish, which will store corresponding
> user-space hints.
>
> In order to preserve the existing behaviour, user-space cache
> managements flags will be handled only by those drivers that
> permit user-space cache hints. That's the purpose of vb2_queue
> ->allow_cache_hints member. Driver must set ->allow_cache_hints
> during queue initialisation to enable cache management hints
> mechanism.
>
> Only drivers that set ->allow_cache_hints during queue initialisation
> will handle user-space cache management hints. Otherwise hints
> will be ignored.
>
> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
> ---
> include/media/videobuf2-core.h | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
> index a2b2208b02da..4a19170672ac 100644
> --- a/include/media/videobuf2-core.h
> +++ b/include/media/videobuf2-core.h
> @@ -263,6 +263,10 @@ struct vb2_buffer {
> * after the 'buf_finish' op is called.
> * copied_timestamp: the timestamp of this capture buffer was copied
> * from an output buffer.
> + * need_cache_sync_on_prepare: when set buffer's ->prepare() function
> + * performs cache sync/invalidation.
> + * need_cache_sync_on_finish: when set buffer's ->finish() function
> + * performs cache sync/invalidation.
> * queued_entry: entry on the queued buffers list, which holds
> * all buffers queued from userspace
> * done_entry: entry on the list that stores all buffers ready
> @@ -273,6 +277,8 @@ struct vb2_buffer {
> unsigned int synced:1;
> unsigned int prepared:1;
> unsigned int copied_timestamp:1;
> + unsigned int need_cache_sync_on_prepare:1;
> + unsigned int need_cache_sync_on_finish:1;
>
> struct vb2_plane planes[VB2_MAX_PLANES];
> struct list_head queued_entry;
> @@ -491,6 +497,9 @@ struct vb2_buf_ops {
> * @uses_requests: requests are used for this queue. Set to 1 the first time
> * a request is queued. Set to 0 when the queue is canceled.
> * If this is 1, then you cannot queue buffers directly.
> + * @allow_cache_hints: when set user-space can pass cache management hints in
> + * order to skip cache flush/invalidation on ->prepare() or/and
> + * ->finish().
checkpatch complains about a space before a tab in the two lines above.
Regards,
Hans
> * @lock: pointer to a mutex that protects the &struct vb2_queue. The
> * driver can set this to a mutex to let the v4l2 core serialize
> * the queuing ioctls. If the driver wants to handle locking
> @@ -564,6 +573,7 @@ struct vb2_queue {
> unsigned requires_requests:1;
> unsigned uses_qbuf:1;
> unsigned uses_requests:1;
> + unsigned allow_cache_hints:1;
>
> struct mutex *lock;
> void *owner;
>
next prev parent reply other threads:[~2020-03-06 13:57 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-02 4:12 [PATCHv4 00/11] Implement V4L2_BUF_FLAG_NO_CACHE_* flags Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 01/11] videobuf2: add cache management members Sergey Senozhatsky
2020-03-06 13:57 ` Hans Verkuil [this message]
2020-03-07 5:22 ` Sergey Senozhatsky
2020-03-07 9:46 ` Sergey Senozhatsky
2020-03-07 10:10 ` Hans Verkuil
2020-03-07 11:28 ` Sergey Senozhatsky
2020-03-07 11:47 ` Hans Verkuil
2020-03-09 3:27 ` Sergey Senozhatsky
2020-03-09 3:44 ` Sergey Senozhatsky
2020-03-09 7:21 ` Hans Verkuil
2020-03-09 7:25 ` Sergey Senozhatsky
2020-03-09 7:28 ` Hans Verkuil
2020-03-09 7:39 ` Sergey Senozhatsky
2020-03-09 8:58 ` Tomasz Figa
2020-03-09 9:08 ` Sergey Senozhatsky
2020-03-09 9:17 ` Tomasz Figa
2020-03-09 9:29 ` Sergey Senozhatsky
2020-03-09 4:03 ` Sergey Senozhatsky
2020-03-09 7:17 ` Hans Verkuil
2020-03-02 4:12 ` [PATCHv4 02/11] videobuf2: handle V4L2 buffer cache flags Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 03/11] videobuf2: add V4L2_FLAG_MEMORY_NON_CONSISTENT flag Sergey Senozhatsky
2020-03-06 13:58 ` Hans Verkuil
2020-03-07 8:09 ` Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 04/11] videobuf2: add queue memory consistency parameter Sergey Senozhatsky
2020-03-06 14:04 ` Hans Verkuil
2020-03-07 7:50 ` Sergey Senozhatsky
2020-03-07 10:03 ` Hans Verkuil
2020-03-20 13:46 ` Dafna Hirschfeld
2020-03-24 2:39 ` Sergey Senozhatsky
2020-03-24 10:17 ` Ezequiel Garcia
2020-03-25 2:32 ` Sergey Senozhatsky
2020-03-27 11:27 ` Tomasz Figa
2020-03-02 4:12 ` [PATCHv4 05/11] videobuf2: handle V4L2_FLAG_MEMORY_NON_CONSISTENT flag Sergey Senozhatsky
2020-03-06 15:30 ` Hans Verkuil
2020-03-07 7:51 ` Sergey Senozhatsky
2020-03-07 9:38 ` Sergey Senozhatsky
2020-03-07 10:05 ` Hans Verkuil
2020-03-02 4:12 ` [PATCHv4 06/11] videobuf2: factor out planes prepare/finish functions Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 07/11] videobuf2: do not sync caches when we are allowed not to Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 08/11] videobuf2: check ->synced flag in prepare() and finish() Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 09/11] videobuf2: add begin/end cpu_access callbacks to dma-contig Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 10/11] videobuf2: add begin/end cpu_access callbacks to dma-sg Sergey Senozhatsky
2020-03-06 14:04 ` Hans Verkuil
2020-03-07 5:26 ` Sergey Senozhatsky
2020-03-07 9:32 ` Hans Verkuil
2020-03-07 9:39 ` Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 11/11] videobuf2: don't test db_attach in dma-contig prepare and finish Sergey Senozhatsky
2020-03-06 14:18 ` [PATCHv4 00/11] Implement V4L2_BUF_FLAG_NO_CACHE_* flags Hans Verkuil
2020-03-07 8:08 ` Sergey Senozhatsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17060663-9c30-de5e-da58-0c847b93e4d3@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=hans.verkuil@cisco.com \
--cc=kyungmin.park@samsung.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@kernel.org \
--cc=posciak@chromium.org \
--cc=sakari.ailus@iki.fi \
--cc=senozhatsky@chromium.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).