* [PATCH] dt-bindings: serial: convert st,asc to DT schema
@ 2024-02-25 10:03 Raphael Gallais-Pou
2024-02-25 15:42 ` Krzysztof Kozlowski
0 siblings, 1 reply; 5+ messages in thread
From: Raphael Gallais-Pou @ 2024-02-25 10:03 UTC (permalink / raw)
To: Greg Kroah-Hartman, Jiri Slaby, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Patrice Chotard
Cc: linux-kernel, linux-serial, devicetree
Converts st,asc binding to DT schema format and update example.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
---
.../devicetree/bindings/serial/st,asc.yaml | 57 +++++++++++++++++++
.../devicetree/bindings/serial/st-asc.txt | 18 ------
2 files changed, 57 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/st,asc.yaml
delete mode 100644 Documentation/devicetree/bindings/serial/st-asc.txt
diff --git a/Documentation/devicetree/bindings/serial/st,asc.yaml b/Documentation/devicetree/bindings/serial/st,asc.yaml
new file mode 100644
index 000000000000..b26e1d247346
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,asc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/st,asc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi SoCs Serial Port
+
+maintainers:
+ - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ const: st,asc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ uart-has-rtscts: true
+
+ st,hw-flow-ctrl:
+ description: When set, enable hardware flow control.
+ type: boolean
+
+ st,force-m1:
+ description: When set, force asc to be in Mode-1. This is recommended for
+ high bit rates above 19.2K.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stih407-clks.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ serial@9830000 {
+ compatible = "st,asc";
+ reg = <0x9830000 0x2c>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt
deleted file mode 100644
index a1b9b6f3490a..000000000000
--- a/Documentation/devicetree/bindings/serial/st-asc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-*st-asc(Serial Port)
-
-Required properties:
-- compatible : Should be "st,asc".
-- reg, reg-names, interrupts, interrupt-names : Standard way to define device
- resources with names. look in
- Documentation/devicetree/bindings/resource-names.txt
-
-Optional properties:
-- st,hw-flow-ctrl bool flag to enable hardware flow control.
-- st,force-m1 bool flat to force asc to be in Mode-1 recommended
- for high bit rates (above 19.2K)
-Example:
-serial@fe440000{
- compatible = "st,asc";
- reg = <0xfe440000 0x2c>;
- interrupts = <0 209 0>;
-};
--
2.43.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] dt-bindings: serial: convert st,asc to DT schema
2024-02-25 10:03 [PATCH] dt-bindings: serial: convert st,asc to DT schema Raphael Gallais-Pou
@ 2024-02-25 15:42 ` Krzysztof Kozlowski
2024-02-26 7:38 ` Raphaël Gallais-Pou
0 siblings, 1 reply; 5+ messages in thread
From: Krzysztof Kozlowski @ 2024-02-25 15:42 UTC (permalink / raw)
To: Raphael Gallais-Pou, Greg Kroah-Hartman, Jiri Slaby, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Patrice Chotard
Cc: linux-kernel, linux-serial, devicetree
On 25/02/2024 11:03, Raphael Gallais-Pou wrote:
> Converts st,asc binding to DT schema format and update example.
>
> Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
> ---
> .../devicetree/bindings/serial/st,asc.yaml | 57 +++++++++++++++++++
> .../devicetree/bindings/serial/st-asc.txt | 18 ------
> 2 files changed, 57 insertions(+), 18 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/serial/st,asc.yaml
> delete mode 100644 Documentation/devicetree/bindings/serial/st-asc.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/st,asc.yaml b/Documentation/devicetree/bindings/serial/st,asc.yaml
> new file mode 100644
> index 000000000000..b26e1d247346
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/st,asc.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/st,asc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STi SoCs Serial Port
> +
> +maintainers:
> + - Patrice Chotard <patrice.chotard@foss.st.com>
> +
> +allOf:
> + - $ref: serial.yaml#
> +
> +properties:
> + compatible:
> + const: st,asc
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
This wasn't here before and your commit msg does not explain it.
> +
> + uart-has-rtscts: true
Drop, not needed.
> +
> + st,hw-flow-ctrl:
> + description: When set, enable hardware flow control.
> + type: boolean
> +
> + st,force-m1:
> + description: When set, force asc to be in Mode-1. This is recommended for
> + high bit rates above 19.2K.
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
Also something new.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dt-bindings: serial: convert st,asc to DT schema
2024-02-25 15:42 ` Krzysztof Kozlowski
@ 2024-02-26 7:38 ` Raphaël Gallais-Pou
2024-02-26 8:09 ` Krzysztof Kozlowski
0 siblings, 1 reply; 5+ messages in thread
From: Raphaël Gallais-Pou @ 2024-02-26 7:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, Greg Kroah-Hartman, Jiri Slaby, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Patrice Chotard
Cc: linux-kernel, linux-serial, devicetree
Hi Krzysztof,
Le 25/02/2024 à 16:42, Krzysztof Kozlowski a écrit :
> On 25/02/2024 11:03, Raphael Gallais-Pou wrote:
>> Converts st,asc binding to DT schema format and update example.
>>
>> Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
>> ---
>> .../devicetree/bindings/serial/st,asc.yaml | 57 +++++++++++++++++++
>> .../devicetree/bindings/serial/st-asc.txt | 18 ------
>> 2 files changed, 57 insertions(+), 18 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/serial/st,asc.yaml
>> delete mode 100644 Documentation/devicetree/bindings/serial/st-asc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/serial/st,asc.yaml b/Documentation/devicetree/bindings/serial/st,asc.yaml
>> new file mode 100644
>> index 000000000000..b26e1d247346
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/serial/st,asc.yaml
>> @@ -0,0 +1,57 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/serial/st,asc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: STMicroelectronics STi SoCs Serial Port
>> +
>> +maintainers:
>> + - Patrice Chotard <patrice.chotard@foss.st.com>
>> +
>> +allOf:
>> + - $ref: serial.yaml#
>> +
>> +properties:
>> + compatible:
>> + const: st,asc
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>
> This wasn't here before and your commit msg does not explain it.
Looking at the device-tree I found that every instance of this device
refers to a phandle of a clock.
Moreover in the driver of the device, the probe fails if it does not
find a clock, hence this addition.
cf. drivers/tty/serial/st-asc.c:701
>
>> +
>> + uart-has-rtscts: true
>
> Drop, not needed.
Ack
>
>> +
>> + st,hw-flow-ctrl:
>> + description: When set, enable hardware flow control.
>> + type: boolean
>> +
>> + st,force-m1:
>> + description: When set, force asc to be in Mode-1. This is recommended for
>> + high bit rates above 19.2K.
>> + type: boolean
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - interrupts
>> + - clocks
>
> Also something new.
This is linked to the addition above.
If you agree with this change I will send a v2 explaining this.
Regards,
Raphaël
>
>
>
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dt-bindings: serial: convert st,asc to DT schema
2024-02-26 7:38 ` Raphaël Gallais-Pou
@ 2024-02-26 8:09 ` Krzysztof Kozlowski
2024-02-26 10:08 ` Raphaël Gallais-Pou
0 siblings, 1 reply; 5+ messages in thread
From: Krzysztof Kozlowski @ 2024-02-26 8:09 UTC (permalink / raw)
To: Raphaël Gallais-Pou, Greg Kroah-Hartman, Jiri Slaby,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Patrice Chotard
Cc: linux-kernel, linux-serial, devicetree
On 26/02/2024 08:38, Raphaël Gallais-Pou wrote:
>>> +
>>> +allOf:
>>> + - $ref: serial.yaml#
>>> +
>>> +properties:
>>> + compatible:
>>> + const: st,asc
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + interrupts:
>>> + maxItems: 1
>>> +
>>> + clocks:
>>> + maxItems: 1
>>
>> This wasn't here before and your commit msg does not explain it.
>
> Looking at the device-tree I found that every instance of this device
> refers to a phandle of a clock.
>
> Moreover in the driver of the device, the probe fails if it does not
> find a clock, hence this addition.
>
> cf. drivers/tty/serial/st-asc.c:701
Commit msg should explain differences from pure conversion and the
reason behind. Otherwise how can we know why you did it?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dt-bindings: serial: convert st,asc to DT schema
2024-02-26 8:09 ` Krzysztof Kozlowski
@ 2024-02-26 10:08 ` Raphaël Gallais-Pou
0 siblings, 0 replies; 5+ messages in thread
From: Raphaël Gallais-Pou @ 2024-02-26 10:08 UTC (permalink / raw)
To: Krzysztof Kozlowski, Greg Kroah-Hartman, Jiri Slaby, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Patrice Chotard
Cc: linux-kernel, linux-serial, devicetree
Le 26/02/2024 à 09:09, Krzysztof Kozlowski a écrit :
> On 26/02/2024 08:38, Raphaël Gallais-Pou wrote:
>>>> +
>>>> +allOf:
>>>> + - $ref: serial.yaml#
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: st,asc
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> +
>>>> + interrupts:
>>>> + maxItems: 1
>>>> +
>>>> + clocks:
>>>> + maxItems: 1
>>>
>>> This wasn't here before and your commit msg does not explain it.
>>
>> Looking at the device-tree I found that every instance of this device
>> refers to a phandle of a clock.
>>
>> Moreover in the driver of the device, the probe fails if it does not
>> find a clock, hence this addition.
>>
>> cf. drivers/tty/serial/st-asc.c:701
>
> Commit msg should explain differences from pure conversion and the
> reason behind. Otherwise how can we know why you did it?
Indeed, I will change the commit log.
Regards,
Raphaël
>
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-02-26 10:08 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-02-25 10:03 [PATCH] dt-bindings: serial: convert st,asc to DT schema Raphael Gallais-Pou
2024-02-25 15:42 ` Krzysztof Kozlowski
2024-02-26 7:38 ` Raphaël Gallais-Pou
2024-02-26 8:09 ` Krzysztof Kozlowski
2024-02-26 10:08 ` Raphaël Gallais-Pou
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).