* [GIT PULL] first round of SCSI updates for the 5.14+ merge window
@ 2021-09-02 16:50 James Bottomley
2021-09-02 22:38 ` Linus Torvalds
2021-09-02 22:42 ` pr-tracker-bot
0 siblings, 2 replies; 8+ messages in thread
From: James Bottomley @ 2021-09-02 16:50 UTC (permalink / raw)
To: Andrew Morton, Linus Torvalds; +Cc: linux-scsi, linux-kernel
This series consists of the usual driver updates (ufs, qla2xxx, target,
smartpqi, lpfc, mpt3sas). The core change causing the most churn was
replacing the command request field request with a macro, allowing us
to offset map to it and remove the redundant field; the same was also
done for the tag field. The most impactful change is the final
removal of scsi_ioctl, which has been deprecated for over a decade.
We also picked up a non trivial conflict with the already upstream
block tree in st.c The correct resolution is here:
https://lore.kernel.org/all/20210824163215.3f08d55c@canb.auug.org.au/
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Adrian Hunter (2):
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufshcd: Fix device links when BOOT WLUN fails to probe
Alim Akhtar (1):
scsi: ufs: ufs-exynos: Fix static checker warning
Arun Easi (5):
scsi: qla2xxx: Fix hang on NVMe command timeouts
scsi: qla2xxx: Fix hang during NVMe session tear down
scsi: qla2xxx: Suppress unnecessary log messages during login
scsi: qla2xxx: Show OS name and version in FDMI-1
scsi: qla2xxx: Add host attribute to trigger MPI hang
Avri Altman (16):
scsi: ufs: ufshpb: Do not report victim error in HCM
scsi: ufs: ufshpb: Verify that 'num_inflight_map_req' is non-negative
scsi: ufs: ufshpb: Use a correct max multi chunk
scsi: ufs: ufshpb: Rewind the read timeout on every read
scsi: ufs: ufshpb: Make host mode parameters configurable
scsi: ufs: ufshpb: Add support for host control mode
scsi: ufs: ufshpb: Do not send umap_all in host control mode
scsi: ufs: ufshpb: Limit the number of in-flight map requests
scsi: ufs: ufshpb: Add "cold" regions timer
scsi: ufs: ufshpb: Add HPB dev reset response
scsi: ufs: ufshpb: Region inactivation in host mode
scsi: ufs: ufshpb: Make eviction depend on region's reads
scsi: ufs: ufshpb: Add reads counter
scsi: ufs: ufshpb: Transform set_dirty to iterate_rgn
scsi: ufs: ufshpb: Add host control mode support to rsp_upiu
scsi: ufs: ufshpb: Cache HPB Control mode on init
Balsundar P (1):
scsi: smartpqi: Add PCI IDs for new ZTE controllers
Bart Van Assche (72):
scsi: core: Remove the request member from struct scsi_cmnd
scsi: usb-storage: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: tcm_loop: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: xen-scsifront: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: virtio_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ufs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: sym53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: sun3_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: stex: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: snic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: smartpqi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: scsi_debug: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qlogicpti: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qla4xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qla1280: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qedi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qedf: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ncr53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: myrs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: myrb: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: mvumi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: mpt3sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: mpi3mr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: megaraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: lpfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: libsas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ips: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ibmvscsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ibmvfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: hpsa: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: hisi_sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: fnic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: dpt_i2o: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: cxlflash: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: csiostor: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: bnx2i: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: aha1542: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: aacraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: NCR5380: Use sc_data_direction instead of rq_data_dir()
scsi: 53c700: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: zfcp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: RDMA/srp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: RDMA/iser: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ata: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: scsi_transport_spi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: scsi_transport_fc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: sr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: sd: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: core: Introduce the scsi_cmd_to_rq() function
scsi: ufs: Add fault injection support
scsi: ufs: Retry aborted SCSI commands instead of completing these successfully
scsi: ufs: Synchronize SCSI and UFS error handling
scsi: ufs: Request sense data asynchronously
scsi: ufs: Fix the SCSI abort handler
scsi: ufs: Optimize SCSI command processing
scsi: ufs: Optimize serialization of setup_xfer_req() calls
scsi: ufs: Revert "Utilize Transfer Request List Completion Notification Register"
scsi: ufs: Inline ufshcd_outstanding_req_clear()
scsi: ufs: Remove several wmb() calls
scsi: ufs: Improve static type checking for the host controller state
scsi: ufs: Verify UIC locking requirements at runtime
scsi: ufs: Remove ufshcd_valid_tag()
scsi: ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate
scsi: ufs: Rename the second ufshcd_probe_hba() argument
scsi: ufs: Only include power management code if necessary
scsi: ufs: Reduce power management code duplication
scsi: ufs: Fix memory corruption by ufshcd_read_desc_param()
scsi: iser: Use scsi_get_sector() instead of scsi_get_lba()
scsi: core: Introduce scsi_get_sector()
Bean Huo (3):
scsi: ufs: core: Add lu_enable sysfs node
scsi: ufs: core: Add L2P entry swap quirk for Micron UFS
scsi: ufs: core: Remove redundant call in ufshcd_add_command_trace()
Bill Wendling (1):
scsi: qla2xxx: Remove unused variable 'status'
Bodo Stroesser (1):
scsi: target: tcmu: Add new feature KEEP_BUF
Christian Loehle (1):
scsi: sd: Do not exit sd_spinup_disk() quietly
Christoph Hellwig (32):
scsi: bsg-lib: Fix commands without data transfer in bsg_transport_sg_io_fn()
scsi: bsg: Fix commands without data transfer in scsi_bsg_sg_io_fn()
scsi: bsg: Move the whole request execution into the SCSI/transport handlers
scsi: block: Remove the remaining SG_IO-related fields from struct request_queue
scsi: block: Remove BLK_SCSI_MAX_CMDS
scsi: bsg: Simplify device registration
scsi: sr: cdrom: Move cdrom_read_cdda_bpc() into the sr driver
scsi: scsi_ioctl: Unexport sg_scsi_ioctl()
scsi: scsi_ioctl: Factor SG_IO handling into a helper
scsi: scsi_ioctl: Factor SCSI_IOCTL_GET_IDLUN handling into a helper
scsi: scsi_ioctl: Consolidate the START STOP UNIT handling
scsi: scsi_ioctl: Remove a very misleading comment
scsi: core: Rename CONFIG_BLK_SCSI_REQUEST to CONFIG_SCSI_COMMON
scsi: scsi_ioctl: Move the "block layer" SCSI ioctl handling to drivers/scsi
scsi: scsi_ioctl: Simplify SCSI passthrough permission checking
scsi: scsi_ioctl: Move scsi_command_size_tbl to scsi_common.c
scsi: scsi_ioctl: Remove scsi_req_init()
scsi: bsg: Move bsg_scsi_ops to drivers/scsi/
scsi: bsg: Decouple from scsi_cmd_ioctl()
scsi: block: Add a queue_max_bytes() helper
scsi: scsi_ioctl: Call scsi_cmd_ioctl() from scsi_ioctl()
scsi: scsi_ioctl: Remove scsi_verify_blk_ioctl()
scsi: scsi_ioctl: Remove scsi_cmd_blk_ioctl()
scsi: cdrom: Remove the call to scsi_cmd_blk_ioctl() from cdrom_ioctl()
scsi: st: Simplify ioctl handling
scsi: core: Remove scsi_compat_ioctl()
scsi: sg: Consolidate compat ioctl handling
scsi: ch: Consolidate compat ioctl handling
scsi: sd: Consolidate compat ioctl handling
scsi: sr: Consolidate compat ioctl handling
scsi: bsg: Remove support for SCSI_IOCTL_SEND_COMMAND
scsi: aacraid: Remove an unused include
Colin Ian King (12):
scsi: snic: Fix spelling mistake 'progres' -> 'progress'
scsi: pm8001: Remove redundant initialization of variable 'rv'
scsi: ufs: ufshpb: Remove redundant initialization of variable 'lba'
scsi: elx: efct: Remove redundant initialization of variable 'ret'
scsi: snic: Remove redundant assignment to variable ret
scsi: ufs: Fix unsigned int compared with less than zero
scsi: qla2xxx: Remove redundant initialization of variable num_cnt
scsi: BusLogic: Use %X for u32 sized integer rather than %lX
scsi: qla2xxx: Fix spelling mistakes "allloc" -> "alloc"
scsi: target: Remove redundant assignment to variable ret
scsi: lpfc: Remove redundant assignment to pointer pcmd
scsi: qla2xxx: Remove redundant continue statement in a for-loop
Daejun Park (4):
scsi: ufs: ufshpb: Add HPB 2.0 support
scsi: ufs: ufshpb: Prepare HPB read for cached sub-region
scsi: ufs: ufshpb: L2P map management for HPB read
scsi: ufs: ufshpb: Introduce Host Performance Buffer feature
Damien Le Moal (1):
scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
Dan Carpenter (4):
scsi: qedf: Fix error codes in qedf_alloc_global_queues()
scsi: qedi: Fix error codes in qedi_alloc_global_queues()
scsi: smartpqi: Fix an error code in pqi_get_raid_map()
scsi: qla2xxx: Fix use after free in debug code
David Disseldorp (4):
scsi: target: core: Drop unnecessary se_cmd ASC/ASCQ members
scsi: target: sbp: Drop incorrect ASC/ASCQ usage
scsi: target: core: Avoid using lun_tg_pt_gp after unlock
scsi: target: Fix NULL dereference on XCOPY completion
Dmitry Bogdanov (1):
scsi: target: Fix protect handling in WRITE SAME(32)
Don Brace (3):
scsi: smartpqi: Update version to 2.1.10-020
scsi: smartpqi: Change Kconfig menu entry to Microchip
scsi: smartpqi: Change driver module macros to Microchip
Dwaipayan Ray (1):
scsi: qla4xxx: Convert uses of __constant_cpu_to_<foo> to cpu_to_<foo>
Guoqing Jiang (1):
scsi: libsas: Drop BLK_DEV_BSGLIB selection
Gustavo A. R. Silva (1):
scsi: smartpqi: Replace one-element array with flexible-array member
Halil Pasic (1):
scsi: core: scsi_ioctl: Fix error code propagation in SG_IO
Hannes Reinecke (7):
scsi: ncr53c8xx: Remove unused code
scsi: ncr53c8xx: Complete all commands during bus reset
scsi: ncr53c8xx: Remove 'sync_reset' argument from ncr_reset_bus()
scsi: qla2xxx: Open-code qla2xxx_eh_device_reset()
scsi: qla2xxx: Open-code qla2xxx_eh_target_reset()
scsi: qla2xxx: Do not call fc_block_scsi_eh() during bus reset
scsi: ibmvfc: Do not wait for initial device scan
Harshvardhan Jha (1):
scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
Igor Pylypiv (1):
scsi: pm80xx: Fix TMF task completion race condition
James Smart (43):
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
scsi: lpfc: Fix possible ABBA deadlock in nvmet_xri_aborted()
scsi: lpfc: Copyright updates for 14.0.0.0 patches
scsi: lpfc: Update lpfc version to 14.0.0.0
scsi: lpfc: Add 256 Gb link speed support
scsi: lpfc: Revise Topology and RAS support checks for new adapters
scsi: lpfc: Fix cq_id truncation in rq create
scsi: lpfc: Add PCI ID support for LPe37000/LPe38000 series adapters
scsi: lpfc: Copyright updates for 12.8.0.11 patches
scsi: lpfc: Update lpfc version to 12.8.0.11
scsi: lpfc: Skip issuing ADISC when node is in NPR state
scsi: lpfc: Skip reg_vpi when link is down for SLI3 in ADISC cmpl path
scsi: lpfc: Call discovery state machine when handling PLOGI/ADISC completions
scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completes
scsi: lpfc: Enable adisc discovery after RSCN by default
scsi: lpfc: Use PBDE feature enabled bit to determine PBDE support
scsi: lpfc: Clear outstanding active mailbox during PCI function reset
scsi: lpfc: Fix KASAN slab-out-of-bounds in lpfc_unreg_rpi() routine
scsi: lpfc: Remove REG_LOGIN check requirement to issue an ELS RDF
scsi: lpfc: Fix memory leaks in error paths while issuing ELS RDF/SCR request
scsi: lpfc: Fix NULL ptr dereference with NPIV ports for RDF handling
scsi: lpfc: Keep NDLP reference until after freeing the IOCB after ELS handling
scsi: lpfc: Fix target reset handler from falsely returning FAILURE
scsi: lpfc: Discovery state machine fixes for LOGO handling
scsi: lpfc: Fix function description comments for vmid routines
scsi: lpfc: Improve firmware download logging
scsi: lpfc: Remove use of kmalloc() in trace event logging
scsi: lpfc: Fix NVMe support reporting in log message
Jason Yan (1):
scsi: libsas: Allow libsas to include SCSI header files directly
John Garry (5):
scsi: qla1280: Stop using scsi_cmnd.tag
scsi: core: Remove scsi_cmnd.tag
scsi: ibmvfc: Stop using scsi_cmnd.tag
scsi: fnic: Stop setting scsi_cmnd.tag
scsi: wd719: Stop using scsi_cmnd.tag
Kashyap Desai (1):
scsi: mpi3mr: Set up IRQs in resume path
Keoseong Park (3):
scsi: ufs: ufshpb: Fix typo in comments
scsi: ufs: ufshpb: Fix possible memory leak
scsi: ufs: Refactor ufshcd_is_intr_aggr_allowed()
Kevin Barnett (1):
scsi: smartpqi: Update copyright notices
Li Manyi (1):
scsi: sr: Return correct event when media event code is 3
Maciej W. Rozycki (2):
scsi: BusLogic: Avoid unbounded vsprintf() use
scsi: BusLogic: Fix missing pr_cont() use
Mahesh Rajashekhara (1):
scsi: smartpqi: Add PCI IDs for H3C P4408 controllers
Martin K. Petersen (14):
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: mpi3mr: Use the proper SCSI midlayer interfaces for PI
scsi: isci: Use the proper SCSI midlayer interfaces for PI
scsi: core: Add helper to return number of logical blocks in a request
scsi: ufs: ufshpb: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: storvsc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ufs: core: Use scsi_get_lba() to get LBA
scsi: core: Make scsi_get_lba() return the LBA
scsi: scsi_debug: Improve RDPROTECT/WRPROTECT handling
scsi: scsi_debug: Remove dump_sector()
scsi: zfcp: Use the proper SCSI midlayer interfaces for PI
scsi: qla2xxx: Use the proper SCSI midlayer interfaces for PI
scsi: core: Add scsi_prot_ref_tag() helper
Martin Kepplinger (3):
scsi: core: Add BLIST_IGN_MEDIA_CHANGE for Ultra HS-SD/MMC USB card readers
scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()
scsi: core: Add new flag BLIST_IGN_MEDIA_CHANGE
Masahiro Yamada (1):
scsi: core: Fix missing FORCE for scsi_devinfo_tbl.c build rule
Mike Christie (2):
scsi: be2iscsi: Fix use-after-free during IP updates
scsi: iscsi: Fix iface sysfs attr detection
Mike McGowen (2):
scsi: smartpqi: Fix ISR accessing uninitialized data
scsi: smartpqi: Add PCI ID for new ntcom controller
Murthy Bhat (1):
scsi: smartpqi: Add SCSI cmd info for resets
Nilesh Javali (3):
scsi: qla2xxx: Update version to 10.02.06.200-k
scsi: qla2xxx: Update version to 10.02.06.100-k
scsi: qla2xxx: Update version to 10.02.00.107-k
Quinn Tran (23):
scsi: qla2xxx: Fix NVMe session down detection
scsi: qla2xxx: Fix NVMe retry
scsi: qla2xxx: Fix NVMe | FCP personality change
scsi: qla2xxx: edif: Do secure PLOGI when auth app is present
scsi: qla2xxx: edif: Add N2N support for EDIF
scsi: qla2xxx: edif: Fix EDIF enable flag
scsi: qla2xxx: edif: Reject AUTH ELS on session down
scsi: qla2xxx: edif: Fix stale session
scsi: qla2xxx: Fix NPIV create erroneous error
scsi: qla2xxx: Fix unsafe removal from linked list
scsi: qla2xxx: Fix port type info
scsi: qla2xxx: Add debug print of 64G link speed
scsi: qla2xxx: Adjust request/response queue size for 28xx
scsi: qla2xxx: edif: Increment command and completion counts
scsi: qla2xxx: edif: Add encryption to I/O path
scsi: qla2xxx: edif: Add doorbell notification for app
scsi: qla2xxx: edif: Add detection of secure device
scsi: qla2xxx: edif: Add authentication pass + fail bsgs
scsi: qla2xxx: edif: Add key update
scsi: qla2xxx: edif: Add extraction of auth_els from the wire
scsi: qla2xxx: edif: Add send, receive, and accept for auth_els
scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs
scsi: qla2xxx: edif: Add start + stop bsgs
Saurav Kashyap (4):
scsi: qla2xxx: Sync queue idx with queue_pair_map idx
scsi: qla2xxx: Changes to support kdump kernel for NVMe BFS
scsi: qla2xxx: Changes to support kdump kernel
scsi: qla2xxx: Changes to support FCP2 Target
Sergey Samoylenko (2):
scsi: target: Fix sense key for invalid EXTENDED COPY request
scsi: target: Allows backend drivers to fail with specific sense codes
Shai Malin (1):
scsi: qedi: Add support for fastpath doorbell recovery
Sreekanth Reddy (4):
scsi: mpt3sas: Bump driver version to 38.100.00.00
scsi: mpt3sas: Add io_uring iopoll support
scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
scsi: mpt3sas: Transition IOC to Ready state during shutdown
Suganath Prabu S (2):
scsi: mpt3sas: Update driver version to 39.100.00.00
scsi: mpt3sas: Use firmware recommended queue depth
Tuo Li (1):
scsi: target: pscsi: Fix possible null-pointer dereference in pscsi_complete_cmd()
Tyrel Datwyler (1):
scsi: ibmvfc: Fix command state accounting and stale response detection
Vincent Palomares (1):
scsi: ufs: Allow async suspend/resume callbacks
Wei Li (1):
scsi: fdomain: Fix error return code in fdomain_probe()
Ye Bin (1):
scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
kernel test robot (1):
scsi: qla2xxx: edif: Fix returnvar.cocci warnings
lijinlin (1):
scsi: core: Fix capacity set to zero after offlinining device
And the diffstat:
Documentation/ABI/testing/sysfs-driver-ufs | 236 ++
block/Kconfig | 26 +-
block/Makefile | 3 +-
block/blk-mq.c | 2 -
block/bsg-lib.c | 90 +-
block/bsg.c | 463 +---
block/scsi_ioctl.c | 890 ------
drivers/ata/libata-eh.c | 5 +-
drivers/ata/libata-scsi.c | 10 +-
drivers/ata/pata_falcon.c | 4 +-
drivers/base/core.c | 2 +
drivers/block/Kconfig | 3 +-
drivers/block/paride/Kconfig | 1 -
drivers/cdrom/cdrom.c | 78 +-
drivers/infiniband/ulp/iser/iser_memory.c | 2 +-
drivers/infiniband/ulp/iser/iser_verbs.c | 2 +-
drivers/infiniband/ulp/srp/ib_srp.c | 9 +-
drivers/s390/scsi/zfcp_fsf.c | 6 +-
drivers/scsi/53c700.c | 2 +-
drivers/scsi/BusLogic.c | 8 +-
drivers/scsi/Kconfig | 18 +-
drivers/scsi/Makefile | 9 +-
drivers/scsi/NCR5380.c | 6 +-
drivers/scsi/aacraid/aachba.c | 3 +-
drivers/scsi/aacraid/commsup.c | 2 +-
drivers/scsi/advansys.c | 4 +-
drivers/scsi/aha1542.c | 6 +-
drivers/scsi/be2iscsi/be_mgmt.c | 84 +-
drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +-
drivers/scsi/ch.c | 73 +-
drivers/scsi/csiostor/csio_scsi.c | 6 +-
drivers/scsi/cxlflash/main.c | 2 +-
drivers/scsi/device_handler/scsi_dh_rdac.c | 4 +-
drivers/scsi/dpt_i2o.c | 4 +-
drivers/scsi/elx/efct/efct_lio.c | 2 +-
drivers/scsi/fnic/fnic_scsi.c | 51 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 4 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
drivers/scsi/hpsa.c | 6 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 34 +-
drivers/scsi/ibmvscsi/ibmvfc.h | 2 +
drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +-
drivers/scsi/ips.c | 2 +-
drivers/scsi/isci/request.c | 4 +-
drivers/scsi/libsas/Kconfig | 1 -
drivers/scsi/libsas/Makefile | 2 +-
drivers/scsi/libsas/sas_ata.c | 6 +-
drivers/scsi/libsas/sas_discover.c | 2 +-
drivers/scsi/libsas/sas_expander.c | 2 +-
drivers/scsi/libsas/sas_host_smp.c | 2 +-
drivers/scsi/libsas/sas_init.c | 2 +-
drivers/scsi/libsas/sas_phy.c | 2 +-
drivers/scsi/libsas/sas_port.c | 2 +-
drivers/scsi/libsas/sas_scsi_host.c | 8 +-
drivers/scsi/lpfc/lpfc.h | 253 +-
drivers/scsi/lpfc/lpfc_attr.c | 247 +-
drivers/scsi/lpfc/lpfc_bsg.c | 89 +
drivers/scsi/lpfc/lpfc_bsg.h | 10 +-
drivers/scsi/lpfc/lpfc_crtn.h | 30 +
drivers/scsi/lpfc/lpfc_ct.c | 27 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 223 ++
drivers/scsi/lpfc/lpfc_debugfs.h | 11 +-
drivers/scsi/lpfc/lpfc_disc.h | 9 +-
drivers/scsi/lpfc/lpfc_els.c | 1193 +++++++-
drivers/scsi/lpfc/lpfc_hbadisc.c | 221 +-
drivers/scsi/lpfc/lpfc_hw.h | 5 +-
drivers/scsi/lpfc/lpfc_hw4.h | 275 +-
drivers/scsi/lpfc/lpfc_ids.h | 4 +-
drivers/scsi/lpfc/lpfc_init.c | 1495 +++++++++-
drivers/scsi/lpfc/lpfc_logmsg.h | 5 +-
drivers/scsi/lpfc/lpfc_mbox.c | 5 +-
drivers/scsi/lpfc/lpfc_mem.c | 15 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 43 +-
drivers/scsi/lpfc/lpfc_nvme.c | 54 +-
drivers/scsi/lpfc/lpfc_nvme.h | 9 +-
drivers/scsi/lpfc/lpfc_nvmet.c | 11 +-
drivers/scsi/lpfc/lpfc_scsi.c | 396 ++-
drivers/scsi/lpfc/lpfc_scsi.h | 6 +-
drivers/scsi/lpfc/lpfc_sli.c | 966 ++++++-
drivers/scsi/lpfc/lpfc_sli.h | 2 +
drivers/scsi/lpfc/lpfc_sli4.h | 5 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/megaraid/megaraid_mm.c | 21 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 4 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 10 +-
drivers/scsi/mpi3mr/mpi3mr.h | 19 +-
drivers/scsi/mpi3mr/mpi3mr_fw.c | 37 +-
drivers/scsi/mpi3mr/mpi3mr_os.c | 76 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 349 ++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 40 +-
drivers/scsi/mpt3sas/mpt3sas_config.c | 37 +
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 24 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 167 +-
drivers/scsi/mvumi.c | 2 +-
drivers/scsi/myrb.c | 11 +-
drivers/scsi/myrs.c | 11 +-
drivers/scsi/ncr53c8xx.c | 203 +-
drivers/scsi/pcmcia/fdomain_cs.c | 4 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/pm8001/pm8001_sas.c | 32 +-
drivers/scsi/qedf/qedf_io.c | 8 +-
drivers/scsi/qedf/qedf_main.c | 10 +-
drivers/scsi/qedi/qedi_fw.c | 23 +-
drivers/scsi/qedi/qedi_iscsi.c | 36 +-
drivers/scsi/qedi/qedi_iscsi.h | 1 +
drivers/scsi/qedi/qedi_main.c | 14 +-
drivers/scsi/qla1280.c | 7 +-
drivers/scsi/qla2xxx/Makefile | 3 +-
drivers/scsi/qla2xxx/qla_attr.c | 42 +-
drivers/scsi/qla2xxx/qla_bsg.c | 90 +-
drivers/scsi/qla2xxx/qla_bsg.h | 3 +
drivers/scsi/qla2xxx/qla_dbg.c | 3 +-
drivers/scsi/qla2xxx/qla_dbg.h | 1 +
drivers/scsi/qla2xxx/qla_def.h | 221 +-
drivers/scsi/qla2xxx/qla_edif.c | 3461 ++++++++++++++++++++++++
drivers/scsi/qla2xxx/qla_edif.h | 136 +
drivers/scsi/qla2xxx/qla_edif_bsg.h | 220 ++
drivers/scsi/qla2xxx/qla_fw.h | 13 +-
drivers/scsi/qla2xxx/qla_gbl.h | 51 +-
drivers/scsi/qla2xxx/qla_gs.c | 19 +-
drivers/scsi/qla2xxx/qla_init.c | 347 ++-
drivers/scsi/qla2xxx/qla_inline.h | 16 +
drivers/scsi/qla2xxx/qla_iocb.c | 163 +-
drivers/scsi/qla2xxx/qla_isr.c | 357 ++-
drivers/scsi/qla2xxx/qla_mbx.c | 59 +-
drivers/scsi/qla2xxx/qla_mid.c | 49 +-
drivers/scsi/qla2xxx/qla_nvme.c | 77 +-
drivers/scsi/qla2xxx/qla_nx.c | 2 -
drivers/scsi/qla2xxx/qla_os.c | 257 +-
drivers/scsi/qla2xxx/qla_sup.c | 1 -
drivers/scsi/qla2xxx/qla_target.c | 196 +-
drivers/scsi/qla2xxx/qla_target.h | 19 +-
drivers/scsi/qla2xxx/qla_version.h | 6 +-
drivers/scsi/qla4xxx/ql4_init.c | 4 +-
drivers/scsi/qla4xxx/ql4_iocb.c | 4 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 30 +-
drivers/scsi/qla4xxx/ql4_nx.c | 10 +-
drivers/scsi/qla4xxx/ql4_os.c | 14 +-
drivers/scsi/qlogicpti.c | 2 +-
drivers/scsi/scsi.c | 2 +-
drivers/scsi/scsi_bsg.c | 106 +
drivers/scsi/scsi_common.c | 9 +
drivers/scsi/scsi_debug.c | 125 +-
drivers/scsi/scsi_devinfo.c | 1 +
drivers/scsi/scsi_error.c | 16 +-
drivers/scsi/scsi_ioctl.c | 851 +++++-
drivers/scsi/scsi_lib.c | 37 +-
drivers/scsi/scsi_logging.c | 18 +-
drivers/scsi/scsi_priv.h | 3 +
drivers/scsi/scsi_scan.c | 8 +-
drivers/scsi/scsi_sysfs.c | 33 +-
drivers/scsi/scsi_transport_fc.c | 2 +-
drivers/scsi/scsi_transport_iscsi.c | 90 +-
drivers/scsi/scsi_transport_spi.c | 2 +-
drivers/scsi/sd.c | 125 +-
drivers/scsi/sd_zbc.c | 10 +-
drivers/scsi/sg.c | 33 +-
drivers/scsi/smartpqi/Kconfig | 8 +-
drivers/scsi/smartpqi/smartpqi.h | 8 +-
drivers/scsi/smartpqi/smartpqi_init.c | 72 +-
drivers/scsi/smartpqi/smartpqi_sas_transport.c | 4 +-
drivers/scsi/smartpqi/smartpqi_sis.c | 4 +-
drivers/scsi/smartpqi/smartpqi_sis.h | 4 +-
drivers/scsi/snic/snic_scsi.c | 14 +-
drivers/scsi/sr.c | 145 +-
drivers/scsi/st.c | 72 +-
drivers/scsi/stex.c | 6 +-
drivers/scsi/storvsc_drv.c | 4 +-
drivers/scsi/sun3_scsi.c | 5 +-
drivers/scsi/sym53c8xx_2/sym_glue.c | 4 +-
drivers/scsi/ufs/Kconfig | 16 +
drivers/scsi/ufs/Makefile | 2 +
drivers/scsi/ufs/cdns-pltfrm.c | 7 +-
drivers/scsi/ufs/tc-dwc-g210-pci.c | 32 +-
drivers/scsi/ufs/tc-dwc-g210-pltfrm.c | 7 +-
drivers/scsi/ufs/ufs-exynos.c | 11 +-
drivers/scsi/ufs/ufs-exynos.h | 2 +-
drivers/scsi/ufs/ufs-fault-injection.c | 70 +
drivers/scsi/ufs/ufs-fault-injection.h | 24 +
drivers/scsi/ufs/ufs-hisi.c | 7 +-
drivers/scsi/ufs/ufs-mediatek.c | 7 +-
drivers/scsi/ufs/ufs-qcom.c | 7 +-
drivers/scsi/ufs/ufs-sysfs.c | 25 +-
drivers/scsi/ufs/ufs.h | 54 +-
drivers/scsi/ufs/ufs_quirks.h | 6 +
drivers/scsi/ufs/ufshcd-pci.c | 48 +-
drivers/scsi/ufs/ufshcd-pltfrm.c | 47 -
drivers/scsi/ufs/ufshcd-pltfrm.h | 18 -
drivers/scsi/ufs/ufshcd.c | 634 +++--
drivers/scsi/ufs/ufshcd.h | 107 +-
drivers/scsi/ufs/ufshci.h | 1 -
drivers/scsi/ufs/ufshpb.c | 2933 ++++++++++++++++++++
drivers/scsi/ufs/ufshpb.h | 323 +++
drivers/scsi/virtio_scsi.c | 4 +-
drivers/scsi/wd719x.c | 8 +-
drivers/scsi/xen-scsifront.c | 2 +-
drivers/target/Kconfig | 2 +-
drivers/target/iscsi/cxgbit/cxgbit_ddp.c | 2 +-
drivers/target/loopback/tcm_loop.c | 8 +-
drivers/target/sbp/sbp_target.c | 4 +-
drivers/target/target_core_alua.c | 94 +-
drivers/target/target_core_iblock.c | 2 +-
drivers/target/target_core_pscsi.c | 18 +-
drivers/target/target_core_sbc.c | 35 +-
drivers/target/target_core_transport.c | 50 +-
drivers/target/target_core_user.c | 150 +-
drivers/target/target_core_xcopy.c | 26 +-
drivers/usb/storage/transport.c | 2 +-
fs/nfsd/Kconfig | 2 +-
include/linux/blkdev.h | 33 +-
include/linux/bsg-lib.h | 1 +
include/linux/bsg.h | 38 +-
include/linux/cdrom.h | 6 +-
include/scsi/scsi_cmnd.h | 39 +-
include/scsi/scsi_device.h | 22 +-
include/scsi/scsi_devinfo.h | 6 +-
include/scsi/scsi_ioctl.h | 9 +-
include/scsi/scsi_request.h | 2 -
include/target/target_core_backend.h | 1 +
include/target/target_core_base.h | 10 +-
include/uapi/linux/target_core_user.h | 2 +
include/uapi/scsi/fc/fc_els.h | 106 +
222 files changed, 17535 insertions(+), 4196 deletions(-)
delete mode 100644 block/scsi_ioctl.c
create mode 100644 drivers/scsi/qla2xxx/qla_edif.c
create mode 100644 drivers/scsi/qla2xxx/qla_edif.h
create mode 100644 drivers/scsi/qla2xxx/qla_edif_bsg.h
create mode 100644 drivers/scsi/scsi_bsg.c
create mode 100644 drivers/scsi/ufs/ufs-fault-injection.c
create mode 100644 drivers/scsi/ufs/ufs-fault-injection.h
create mode 100644 drivers/scsi/ufs/ufshpb.c
create mode 100644 drivers/scsi/ufs/ufshpb.h
James
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [GIT PULL] first round of SCSI updates for the 5.14+ merge window
2021-09-02 16:50 [GIT PULL] first round of SCSI updates for the 5.14+ merge window James Bottomley
@ 2021-09-02 22:38 ` Linus Torvalds
2021-09-02 22:46 ` Jens Axboe
2021-09-02 23:23 ` James Bottomley
2021-09-02 22:42 ` pr-tracker-bot
1 sibling, 2 replies; 8+ messages in thread
From: Linus Torvalds @ 2021-09-02 22:38 UTC (permalink / raw)
To: James Bottomley, Jens Axboe; +Cc: Andrew Morton, linux-scsi, linux-kernel
On Thu, Sep 2, 2021 at 9:50 AM James Bottomley
<James.Bottomley@hansenpartnership.com> wrote:
>
> We also picked up a non trivial conflict with the already upstream
> block tree in st.c
Hmm. Resolving that conflict, I just reacted to how the st.c code
passes in a NULL gendisk to scsi_ioctl() and then on to
blk_execute_rq().
Just checking that was fine, and I notice how *many* places do that.
Should the blk_execute_rq() function even take that "struct gendisk
*bd_disk" argument at all?
Maybe the right thing to do would be for the people who care to just
set rq->rq_disk before starting the request..
But I guess it's traditional, and nobody cares.
Linus
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [GIT PULL] first round of SCSI updates for the 5.14+ merge window
2021-09-02 22:38 ` Linus Torvalds
@ 2021-09-02 22:46 ` Jens Axboe
2021-09-02 23:23 ` James Bottomley
1 sibling, 0 replies; 8+ messages in thread
From: Jens Axboe @ 2021-09-02 22:46 UTC (permalink / raw)
To: Linus Torvalds, James Bottomley; +Cc: Andrew Morton, linux-scsi, linux-kernel
On 9/2/21 4:38 PM, Linus Torvalds wrote:
> On Thu, Sep 2, 2021 at 9:50 AM James Bottomley
> <James.Bottomley@hansenpartnership.com> wrote:
>>
>> We also picked up a non trivial conflict with the already upstream
>> block tree in st.c
>
> Hmm. Resolving that conflict, I just reacted to how the st.c code
> passes in a NULL gendisk to scsi_ioctl() and then on to
> blk_execute_rq().
>
> Just checking that was fine, and I notice how *many* places do that.
>
> Should the blk_execute_rq() function even take that "struct gendisk
> *bd_disk" argument at all?
>
> Maybe the right thing to do would be for the people who care to just
> set rq->rq_disk before starting the request..
>
> But I guess it's traditional, and nobody cares.
We could certainly just do that. There are other things that are
required set in the request before that call, things like the queue, but
those get naturally set by the request allocation. Hence it would not be
_that_ different to require disk being set. Seems safer to just keep it
the way it is and pass in the reference, even if it ends up being NULL
in probably 50% of the cases.
--
Jens Axboe
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] first round of SCSI updates for the 5.14+ merge window
2021-09-02 22:38 ` Linus Torvalds
2021-09-02 22:46 ` Jens Axboe
@ 2021-09-02 23:23 ` James Bottomley
2021-09-02 23:32 ` Jens Axboe
2021-09-03 4:27 ` Christoph Hellwig
1 sibling, 2 replies; 8+ messages in thread
From: James Bottomley @ 2021-09-02 23:23 UTC (permalink / raw)
To: Linus Torvalds, Jens Axboe
Cc: Andrew Morton, linux-scsi, linux-kernel, Christoph Hellwig
On Thu, 2021-09-02 at 15:38 -0700, Linus Torvalds wrote:
> On Thu, Sep 2, 2021 at 9:50 AM James Bottomley
> <James.Bottomley@hansenpartnership.com> wrote:
> > We also picked up a non trivial conflict with the already upstream
> > block tree in st.c
>
> Hmm. Resolving that conflict, I just reacted to how the st.c code
> passes in a NULL gendisk to scsi_ioctl() and then on to
> blk_execute_rq().
>
> Just checking that was fine, and I notice how *many* places do that.
>
> Should the blk_execute_rq() function even take that "struct gendisk
> *bd_disk" argument at all?
>
> Maybe the right thing to do would be for the people who care to just
> set rq->rq_disk before starting the request..
>
> But I guess it's traditional, and nobody cares.
It's certainly traditional, but Christoph has been caring a lot about
cleaning up our gendisks recently, so he might be interested in seeing
if he can fix it ...
James
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] first round of SCSI updates for the 5.14+ merge window
2021-09-02 23:23 ` James Bottomley
@ 2021-09-02 23:32 ` Jens Axboe
2021-09-03 4:27 ` Christoph Hellwig
1 sibling, 0 replies; 8+ messages in thread
From: Jens Axboe @ 2021-09-02 23:32 UTC (permalink / raw)
To: James Bottomley, Linus Torvalds
Cc: Andrew Morton, linux-scsi, linux-kernel, Christoph Hellwig
On 9/2/21 5:23 PM, James Bottomley wrote:
> On Thu, 2021-09-02 at 15:38 -0700, Linus Torvalds wrote:
>> On Thu, Sep 2, 2021 at 9:50 AM James Bottomley
>> <James.Bottomley@hansenpartnership.com> wrote:
>>> We also picked up a non trivial conflict with the already upstream
>>> block tree in st.c
>>
>> Hmm. Resolving that conflict, I just reacted to how the st.c code
>> passes in a NULL gendisk to scsi_ioctl() and then on to
>> blk_execute_rq().
>>
>> Just checking that was fine, and I notice how *many* places do that.
>>
>> Should the blk_execute_rq() function even take that "struct gendisk
>> *bd_disk" argument at all?
>>
>> Maybe the right thing to do would be for the people who care to just
>> set rq->rq_disk before starting the request..
>>
>> But I guess it's traditional, and nobody cares.
>
> It's certainly traditional, but Christoph has been caring a lot about
> cleaning up our gendisks recently, so he might be interested in seeing
> if he can fix it ...
It's trivially doable, it's more a question of whether it's a good idea
or not... At least when passed in you have to make a conscious decision
on it being NULL. And just like Linus did, it's something you'll notice
and see what other callers are doing.
As I said, I don't feel that strongly about it. Hopefully most cases
that would forget to set it would trigger a NULL defer when they test
their code, and the core does initialize ->rq_disk to NULL. It's less
risky now than earlier, where the request alloc path was less
streamlined.
--
Jens Axboe
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] first round of SCSI updates for the 5.14+ merge window
2021-09-02 23:23 ` James Bottomley
2021-09-02 23:32 ` Jens Axboe
@ 2021-09-03 4:27 ` Christoph Hellwig
2021-09-03 7:57 ` Christoph Hellwig
1 sibling, 1 reply; 8+ messages in thread
From: Christoph Hellwig @ 2021-09-03 4:27 UTC (permalink / raw)
To: James Bottomley
Cc: Linus Torvalds, Jens Axboe, Andrew Morton, linux-scsi,
linux-kernel, Christoph Hellwig
On Thu, Sep 02, 2021 at 04:23:43PM -0700, James Bottomley wrote:
> >
> > Just checking that was fine, and I notice how *many* places do that.
> >
> > Should the blk_execute_rq() function even take that "struct gendisk
> > *bd_disk" argument at all?
No, it shouldn't. rq->rq_disk should go away and use rq->q->disk
instead. This has been on my TODO list, but didn't make the cut for
this merge window.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] first round of SCSI updates for the 5.14+ merge window
2021-09-03 4:27 ` Christoph Hellwig
@ 2021-09-03 7:57 ` Christoph Hellwig
0 siblings, 0 replies; 8+ messages in thread
From: Christoph Hellwig @ 2021-09-03 7:57 UTC (permalink / raw)
To: James Bottomley
Cc: Linus Torvalds, Jens Axboe, Andrew Morton, linux-scsi,
linux-kernel, Christoph Hellwig
On Fri, Sep 03, 2021 at 05:27:26AM +0100, Christoph Hellwig wrote:
> On Thu, Sep 02, 2021 at 04:23:43PM -0700, James Bottomley wrote:
> > >
> > > Just checking that was fine, and I notice how *many* places do that.
> > >
> > > Should the blk_execute_rq() function even take that "struct gendisk
> > > *bd_disk" argument at all?
>
> No, it shouldn't. rq->rq_disk should go away and use rq->q->disk
> instead. This has been on my TODO list, but didn't make the cut for
> this merge window.
Here is a quick draft of that:
http://git.infradead.org/users/hch/block.git/shortlog/refs/heads/block-remove-rq_disk
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] first round of SCSI updates for the 5.14+ merge window
2021-09-02 16:50 [GIT PULL] first round of SCSI updates for the 5.14+ merge window James Bottomley
2021-09-02 22:38 ` Linus Torvalds
@ 2021-09-02 22:42 ` pr-tracker-bot
1 sibling, 0 replies; 8+ messages in thread
From: pr-tracker-bot @ 2021-09-02 22:42 UTC (permalink / raw)
To: James Bottomley; +Cc: Andrew Morton, Linus Torvalds, linux-scsi, linux-kernel
The pull request you sent on Thu, 02 Sep 2021 09:50:07 -0700:
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/a9c9a6f741cdaa2fa9ba24a790db8d07295761e3
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-09-03 7:59 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-02 16:50 [GIT PULL] first round of SCSI updates for the 5.14+ merge window James Bottomley
2021-09-02 22:38 ` Linus Torvalds
2021-09-02 22:46 ` Jens Axboe
2021-09-02 23:23 ` James Bottomley
2021-09-02 23:32 ` Jens Axboe
2021-09-03 4:27 ` Christoph Hellwig
2021-09-03 7:57 ` Christoph Hellwig
2021-09-02 22:42 ` pr-tracker-bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).