Re: [RFCv3 0/7] OMAP SSI driver

Re: [RFCv3 0/7] OMAP SSI driver

[Pavel Machek]

Hi!

> 3. cmt_speech
> 
>  This is an hsi client driver, which takes care of interchanging
>  speech data with the modem. This one is needed for calling. I
>  will have a look at it once the basic stuff is working.
> 
> P.S.: You can get a mainline kernel status matrix for the Nokia
>       N900 on this page: http://elinux.org/N900

Thanks a lot for the page. I did not realize how well is N900 supported in
latest mainline...

What do you use as userland? Is there specific userland 3.13 is expected
to work with?
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[RFCv3 0/7] OMAP SSI driver

[Sebastian Reichel]

Hi,

Here is the third round of the OMAP SSI driver patches.

Changes since RFCv2:
* Move DT data from omap34xx.dtsi to omap3.dtsi
  Nokia N9 uses an omap3630 and ssi for modem connection, thus SSI
  seems to be part of all OMAP3 SoCs.
* Move DT documentation to the driver patch
* Update wording in DT documentation
  I just applied Stephen Warrens suggestions
* Removal of omap_pm_get_dev_context_loss_count as demanded by Tony Lindgren
  For now there is no context loss support in the driver, since I do not
  have enough information about the chip to support this via registers.
* Dropped useless "default n" from KConfig
* Add support for HSI client registration via DT
* Register hsi-char as ssi client for Nokia N900
  Currently only hsi-char client is available in the mainline kernel,
  but for the Nokia N900 two more clients will be needed: ssi-protocol
  and cmt-speech. Those will be added with their own patchset.
* Use ida_simple_get for device id, since DT does not setup pd->id
* Fixed SSI interrupt numbers in omap3.dtsi
  I subtracted OMAP_INTC_START before, but the original patch did
  not yet have OMAP_INTC_START added.
* Fixed compilation as kernel modules
* Fixed reload of kernel modules
* Added module dependency: omap_ssi_port needs omap_port

TODO:
* Central Message Queue
  I did not yet implement a central message queue in the HSI framework.
  I will do this after Nokia N900 modem is working in the mainline kernel,
  since that makes testing easier.
* Get clock data from DT
  This depends on a patchset, which is not yet part of any kernel tree.
  Apart from that I don't know which clocks will be needed. That depends
  on the implementation of the hwmod DTification (see next point)
* Remove the hwmod DT hack
  This depends on some future work merging hwmod data into DT.

Version 2 of the patchset: https://lkml.org/lkml/2013/9/15/98

-- Sebastian

Sebastian Reichel (7):
  ARM: OMAP2+: hwmod-data: Add SSI information
  HSI: add Device Tree support for HSI clients
  HSI: method to unregister clients from an hsi port
  HSI: hsi-char: add Device Tree support
  HSI: hsi-char: fix driver for multiport scenarios
  ARM: OMAP2+: HSI: Introduce OMAP SSI driver
  ARM: dts: N900: Add SSI information

 Documentation/devicetree/bindings/hsi/omap_ssi.txt |   69 +
 .../devicetree/bindings/hsi/trivial-devices.txt    |   36 +
 arch/arm/boot/dts/omap3-n900.dts                   |   12 +
 arch/arm/boot/dts/omap3.dtsi                       |   47 +
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c         |   48 +
 drivers/hsi/Kconfig                                |    1 +
 drivers/hsi/Makefile                               |    1 +
 drivers/hsi/clients/hsi_char.c                     |   15 +-
 drivers/hsi/controllers/Kconfig                    |   19 +
 drivers/hsi/controllers/Makefile                   |    6 +
 drivers/hsi/controllers/omap_ssi.c                 |  618 +++++++++
 drivers/hsi/controllers/omap_ssi.h                 |  166 +++
 drivers/hsi/controllers/omap_ssi_port.c            | 1400 ++++++++++++++++++++
 drivers/hsi/controllers/omap_ssi_regs.h            |  171 +++
 drivers/hsi/hsi.c                                  |   80 +-
 include/dt-bindings/hsi/hsi.h                      |   17 +
 include/linux/hsi/hsi.h                            |    3 +
 17 files changed, 2707 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt
 create mode 100644 Documentation/devicetree/bindings/hsi/trivial-devices.txt
 create mode 100644 drivers/hsi/controllers/Kconfig
 create mode 100644 drivers/hsi/controllers/Makefile
 create mode 100644 drivers/hsi/controllers/omap_ssi.c
 create mode 100644 drivers/hsi/controllers/omap_ssi.h
 create mode 100644 drivers/hsi/controllers/omap_ssi_port.c
 create mode 100644 drivers/hsi/controllers/omap_ssi_regs.h
 create mode 100644 include/dt-bindings/hsi/hsi.h

-- 
1.8.4.rc3

[RFCv3 1/7] ARM: OMAP2+: hwmod-data: Add SSI information

[Sebastian Reichel]

This patch adds Synchronous Serial Interface (SSI) hwmod support for
OMAP34xx SoCs.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 48 ++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 0c3a427..9e56fab 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3693,6 +3693,53 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/*
+ * 'ssi' class
+ * synchronous serial interface (multichannel and full-duplex serial if)
+ */
+
+static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
+			   SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
+	.name	= "ssi",
+	.sysc	= &omap34xx_ssi_sysc,
+};
+
+static struct omap_hwmod omap34xx_ssi_hwmod = {
+	.name		= "ssi",
+	.class		= &omap34xx_ssi_hwmod_class,
+	.clkdm_name	= "core_l4_clkdm",
+	.main_clk	= "ssi_ssr_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id		= 1,
+			.module_bit		= OMAP3430_EN_SSI_SHIFT,
+			.module_offs		= CORE_MOD,
+			.idlest_reg_id		= 1,
+			.idlest_idle_bit	= OMAP3430ES2_ST_SSI_IDLE_SHIFT,
+		},
+	},
+};
+
+/* L4 CORE -> SSI */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_ssi_hwmod,
+	.clk		= "ssi_ick",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l3_main__l4_core,
 	&omap3xxx_l3_main__l4_per,
@@ -3818,6 +3865,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 #ifdef CONFIG_OMAP_IOMMU_IVA2
 	&omap3xxx_l3_main__mmu_iva,
 #endif
+	&omap34xx_l4_core__ssi,
 	NULL
 };
 
-- 
1.8.4.rc3

[RFCv3 2/7] HSI: add Device Tree support for HSI clients

[Sebastian Reichel]

Add new method hsi_add_clients_from_dt, which can be used
to initialize HSI clients from a device tree node.

The patch also documents the DT binding for trivial HSI
clients.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 .../devicetree/bindings/hsi/trivial-devices.txt    | 36 +++++++++++
 drivers/hsi/hsi.c                                  | 70 +++++++++++++++++++++-
 include/dt-bindings/hsi/hsi.h                      | 17 ++++++
 include/linux/hsi/hsi.h                            |  2 +
 4 files changed, 124 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/hsi/trivial-devices.txt
 create mode 100644 include/dt-bindings/hsi/hsi.h

diff --git a/Documentation/devicetree/bindings/hsi/trivial-devices.txt b/Documentation/devicetree/bindings/hsi/trivial-devices.txt
new file mode 100644
index 0000000..1ace14a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/trivial-devices.txt
@@ -0,0 +1,36 @@
+This is a list of trivial hsi client devices that have simple
+device tree bindings, consisting only of a compatible field
+and the optional hsi configuration.
+
+If a device needs more specific bindings, such as properties to
+describe some aspect of it, there needs to be a specific binding
+document for it just like any other devices.
+
+Optional HSI configuration properties:
+
+- hsi,mode		Bit transmission mode (STREAM or FRAME)
+			The first value is used for RX and the second one for
+			TX configuration. If only one value is provided it will
+			be used for RX and TX.
+			The assignments may be found in header file
+			<dt-bindings/hsi/hsi.h>.
+- hsi,channels		Number of channels to use [1..16]
+			The first value is used for RX and the second one for
+			TX configuration. If only one value is provided it will
+			be used for RX and TX.
+- hsi,speed		Max bit transmission speed (Kbit/s)
+			The first value is used for RX and the second one for
+			TX configuration. If only one value is provided it will
+			be used for RX and TX.
+- hsi,flow		RX flow type (SYNCHRONIZED or PIPELINE)
+			The assignments may be found in header file
+			<dt-bindings/hsi/hsi.h>.
+- hsi,arb_mode		Arbitration mode for TX frame (Round robin, priority)
+			The assignments may be found in header file
+			<dt-bindings/hsi/hsi.h>.
+
+This is the list of trivial client devices:
+
+Compatible		Description
+==========		=============
+hsi-char		HSI character device
diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c
index 66d4458..4384d7e 100644
--- a/drivers/hsi/hsi.c
+++ b/drivers/hsi/hsi.c
@@ -26,6 +26,8 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include "hsi_core.h"
 
 static ssize_t modalias_show(struct device *dev,
@@ -48,7 +50,10 @@ static int hsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
 
 static int hsi_bus_match(struct device *dev, struct device_driver *driver)
 {
-	return strcmp(dev_name(dev), driver->name) == 0;
+	if (dev->of_node != NULL)
+		return of_driver_match_device(dev, driver);
+	else
+		return strcmp(dev_name(dev), driver->name) == 0;
 }
 
 static struct bus_type hsi_bus_type = {
@@ -73,6 +78,7 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info)
 	cl->tx_cfg = info->tx_cfg;
 	cl->rx_cfg = info->rx_cfg;
 	cl->device.bus = &hsi_bus_type;
+
 	cl->device.parent = &port->device;
 	cl->device.release = hsi_client_release;
 	dev_set_name(&cl->device, "%s", info->name);
@@ -99,6 +105,68 @@ static void hsi_scan_board_info(struct hsi_controller *hsi)
 		}
 }
 
+static void hsi_of_get_client_cfg_property(struct device_node *client,
+				char *name, unsigned int *rx, unsigned int *tx)
+{
+	int err;
+
+	err = of_property_read_u32_index(client, name, 0, rx);
+	if (!err)
+		*rx = 0;
+
+	err = of_property_read_u32_index(client, name, 1, tx);
+	if (!err)
+		*tx = *rx;
+}
+
+static void hsi_add_client_from_dt(struct hsi_port *port,
+						struct device_node *client)
+{
+	struct hsi_client *cl;
+	const char *name;
+	int err;
+
+	cl = kzalloc(sizeof(*cl), GFP_KERNEL);
+	if (!cl)
+		return;
+
+	err = of_property_read_string(client, "compatible", &name);
+	if (!err) {
+		dev_set_name(&cl->device, "%s", name);
+	} else {
+		kfree(cl);
+		return;
+	}
+
+	hsi_of_get_client_cfg_property(client, "hsi,mode", &cl->rx_cfg.mode,
+							&cl->tx_cfg.mode);
+	hsi_of_get_client_cfg_property(client, "hsi,speed", &cl->rx_cfg.speed,
+							&cl->tx_cfg.speed);
+	hsi_of_get_client_cfg_property(client, "hsi,channels",
+				&cl->rx_cfg.channels, &cl->tx_cfg.channels);
+	of_property_read_u32(client, "hsi,flow", &cl->rx_cfg.flow);
+	of_property_read_u32(client, "hsi,arb_mode", &cl->tx_cfg.arb_mode);
+
+	cl->device.bus = &hsi_bus_type;
+	cl->device.parent = &port->device;
+	cl->device.release = hsi_client_release;
+	cl->device.of_node = client;
+
+	if (device_register(&cl->device) < 0) {
+		pr_err("hsi: failed to register client: %s\n", name);
+		put_device(&cl->device);
+	}
+}
+
+void hsi_add_clients_from_dt(struct hsi_port *port, struct device_node *clients)
+{
+	struct device_node *child;
+
+	for_each_available_child_of_node(clients, child)
+		hsi_add_client_from_dt(port, child);
+}
+EXPORT_SYMBOL_GPL(hsi_add_clients_from_dt);
+
 static int hsi_remove_client(struct device *dev, void *data __maybe_unused)
 {
 	device_unregister(dev);
diff --git a/include/dt-bindings/hsi/hsi.h b/include/dt-bindings/hsi/hsi.h
new file mode 100644
index 0000000..2d6b181
--- /dev/null
+++ b/include/dt-bindings/hsi/hsi.h
@@ -0,0 +1,17 @@
+/*
+ * This header provides constants for hsi client bindings.
+ */
+
+#ifndef _DT_BINDINGS_HSI_H
+#define _DT_BINDINGS_HSI_H
+
+#define HSI_MODE_STREAM 1
+#define HSI_MODE_FRAME 2
+
+#define HSI_FLOW_SYNC 0
+#define HSI_FLOW_PIPE 1
+
+#define HSI_ARB_RR 0
+#define HSI_ARB_PRIO 1
+
+#endif /* _DT_BINDINGS_HSI_H */
diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h
index 0dca785..fb07339 100644
--- a/include/linux/hsi/hsi.h
+++ b/include/linux/hsi/hsi.h
@@ -282,6 +282,8 @@ struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags);
 void hsi_put_controller(struct hsi_controller *hsi);
 int hsi_register_controller(struct hsi_controller *hsi);
 void hsi_unregister_controller(struct hsi_controller *hsi);
+void hsi_add_clients_from_dt(struct hsi_port *port,
+						struct device_node *clients);
 
 static inline void hsi_controller_set_drvdata(struct hsi_controller *hsi,
 								void *data)
-- 
1.8.4.rc3

[RFCv3 3/7] HSI: method to unregister clients from an hsi port

[Sebastian Reichel]

This exports a method to unregister all clients from
an hsi port.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 drivers/hsi/hsi.c       | 10 ++++++++++
 include/linux/hsi/hsi.h |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c
index 4384d7e..9dd7120 100644
--- a/drivers/hsi/hsi.c
+++ b/drivers/hsi/hsi.c
@@ -196,6 +196,16 @@ static void hsi_port_release(struct device *dev)
 }
 
 /**
+ * hsi_unregister_port - Unregister an HSI port
+ * @port: The HSI port to unregister
+ */
+void hsi_port_unregister_clients(struct hsi_port *port)
+{
+	device_for_each_child(&port->device, NULL, hsi_remove_client);
+}
+EXPORT_SYMBOL_GPL(hsi_port_unregister_clients);
+
+/**
  * hsi_unregister_controller - Unregister an HSI controller
  * @hsi: The HSI controller to register
  */
diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h
index fb07339..89cc6f2 100644
--- a/include/linux/hsi/hsi.h
+++ b/include/linux/hsi/hsi.h
@@ -284,6 +284,7 @@ int hsi_register_controller(struct hsi_controller *hsi);
 void hsi_unregister_controller(struct hsi_controller *hsi);
 void hsi_add_clients_from_dt(struct hsi_port *port,
 						struct device_node *clients);
+void hsi_port_unregister_clients(struct hsi_port *port);
 
 static inline void hsi_controller_set_drvdata(struct hsi_controller *hsi,
 								void *data)
-- 
1.8.4.rc3

[RFCv3 4/7] HSI: hsi-char: add Device Tree support

[Sebastian Reichel]

Add of_match_table to hsi_char driver, so that it can
be referenced from Device Tree.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 drivers/hsi/clients/hsi_char.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c
index e61e5f9..e3302ed 100644
--- a/drivers/hsi/clients/hsi_char.c
+++ b/drivers/hsi/clients/hsi_char.c
@@ -42,6 +42,7 @@
 #include <linux/stat.h>
 #include <linux/hsi/hsi.h>
 #include <linux/hsi/hsi_char.h>
+#include <linux/of_device.h>
 
 #define HSC_DEVS		16 /* Num of channels */
 #define HSC_MSGS		4
@@ -758,12 +759,24 @@ static int hsc_remove(struct device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id hsi_char_of_match[] = {
+	{ .compatible = "ssi-char", },
+	{ .compatible = "hsi-char", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hsi_char_of_match);
+#else
+#define hsi_char_of_match NULL
+#endif
+
 static struct hsi_client_driver hsc_driver = {
 	.driver = {
 		.name	= "hsi_char",
 		.owner	= THIS_MODULE,
 		.probe	= hsc_probe,
 		.remove	= hsc_remove,
+		.of_match_table = hsi_char_of_match,
 	},
 };
 
-- 
1.8.4.rc3

[RFCv3 5/7] HSI: hsi-char: fix driver for multiport scenarios

[Sebastian Reichel]

Fix return code check of alloc_chrdev_region, which
returns 0 on success.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 drivers/hsi/clients/hsi_char.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c
index e3302ed..5457690 100644
--- a/drivers/hsi/clients/hsi_char.c
+++ b/drivers/hsi/clients/hsi_char.c
@@ -706,7 +706,7 @@ static int hsc_probe(struct device *dev)
 	if (!hsc_major) {
 		ret = alloc_chrdev_region(&hsc_dev, hsc_baseminor,
 						HSC_DEVS, devname);
-		if (ret > 0)
+		if (ret == 0)
 			hsc_major = MAJOR(hsc_dev);
 	} else {
 		hsc_dev = MKDEV(hsc_major, hsc_baseminor);
-- 
1.8.4.rc3

[RFCv3 6/7] ARM: OMAP2+: HSI: Introduce OMAP SSI driver

[Sebastian Reichel]

This patch adds an OMAP SSI driver to the HSI framework.

The Synchronous Serial Interface (SSI) is a legacy version
of HSI. As in the case of HSI, it is mainly used to connect
Application engines (APE) with cellular modem engines (CMT)
in cellular handsets.

It provides a multichannel, full-duplex, multi-core communication
with no reference clock. The OMAP SSI block is capable of reaching
speeds of 110 Mbit/s.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 Documentation/devicetree/bindings/hsi/omap_ssi.txt |   69 +
 drivers/hsi/Kconfig                                |    1 +
 drivers/hsi/Makefile                               |    1 +
 drivers/hsi/controllers/Kconfig                    |   19 +
 drivers/hsi/controllers/Makefile                   |    6 +
 drivers/hsi/controllers/omap_ssi.c                 |  618 +++++++++
 drivers/hsi/controllers/omap_ssi.h                 |  166 +++
 drivers/hsi/controllers/omap_ssi_port.c            | 1400 ++++++++++++++++++++
 drivers/hsi/controllers/omap_ssi_regs.h            |  171 +++
 9 files changed, 2451 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt
 create mode 100644 drivers/hsi/controllers/Kconfig
 create mode 100644 drivers/hsi/controllers/Makefile
 create mode 100644 drivers/hsi/controllers/omap_ssi.c
 create mode 100644 drivers/hsi/controllers/omap_ssi.h
 create mode 100644 drivers/hsi/controllers/omap_ssi_port.c
 create mode 100644 drivers/hsi/controllers/omap_ssi_regs.h

diff --git a/Documentation/devicetree/bindings/hsi/omap_ssi.txt b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
new file mode 100644
index 0000000..c62d4b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
@@ -0,0 +1,69 @@
+OMAP SSI controller bindings
+
+Required properties:
+- compatible:		Should include "ti,omap3-ssi".
+- ti,hwmods:		Name of the hwmod associated to the controller, which
+			is "ssi".
+- reg-names:		Contains the values "sys" and "gdd".
+- reg:			Contains a register specifier for each entry in
+			reg-names.
+- interrupt-names:      Contains the value "gdd_mpu".
+- interrupts: 		Contains interrupt information for each entry in
+			interrupt-names.
+- ranges		Represents the bus address mapping between the main
+			controller node and the child nodes below.
+- #address-cells	Should be set to <1>
+- #size-cells		Should be set to <1>
+
+Each port is represented as a sub-node of the ti,omap3-ssi device.
+
+Required Port sub-node properties:
+- compatible:		Should be set to the following value
+                        ti,omap3-ssi-port (applicable to OMAP34xx devices)
+- reg-names:		Contains the values "rx" and "tx".
+- reg:			Contains a register specifier for each entry in
+			reg-names.
+- interrupt-parent	Should be a phandle for the interrupt controller
+- interrupt-names:	Contains the values "mpu_irq0" and "mpu_irq1".
+- interrupts:		Contains interrupt information for each entry in
+			interrupt-names.
+- ti,ssi-cawake-gpio:	Defines which GPIO pin is used to signify CAWAKE
+			events for the port. This is an optional board-specific
+			property. If it's missing the port will not be
+			enabled.
+
+Example for Nokia N900:
+
+ssi-controller@48058000 {
+	compatible = "ti,omap3-ssi";
+	ti,hwmods = "ssi";
+
+	reg = <0x48058000 0x1000>,
+	      <0x48059000 0x1000>;
+	reg-names = "sys",
+		    "gdd";
+
+	interrupts = <55>;
+	interrupt-names = "gdd_mpu";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	ssi-port@0 {
+		compatible = "ti,omap3-ssi-port";
+
+		reg = <0x4805a000 0x800>,
+		      <0x4805a800 0x800>;
+		reg-names = "tx",
+			    "rx";
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>,
+			     <52>;
+		interrupt-names = "mpu_irq0",
+				  "mpu_irq1";
+
+		ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+	}
+}
diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig
index d94e38d..2c76de4 100644
--- a/drivers/hsi/Kconfig
+++ b/drivers/hsi/Kconfig
@@ -14,6 +14,7 @@ config HSI_BOARDINFO
 	bool
 	default y
 
+source "drivers/hsi/controllers/Kconfig"
 source "drivers/hsi/clients/Kconfig"
 
 endif # HSI
diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile
index 9d5d33f..360371e 100644
--- a/drivers/hsi/Makefile
+++ b/drivers/hsi/Makefile
@@ -3,4 +3,5 @@
 #
 obj-$(CONFIG_HSI_BOARDINFO)	+= hsi_boardinfo.o
 obj-$(CONFIG_HSI)		+= hsi.o
+obj-y				+= controllers/
 obj-y				+= clients/
diff --git a/drivers/hsi/controllers/Kconfig b/drivers/hsi/controllers/Kconfig
new file mode 100644
index 0000000..037a344
--- /dev/null
+++ b/drivers/hsi/controllers/Kconfig
@@ -0,0 +1,19 @@
+#
+# HSI controllers configuration
+#
+comment "HSI controllers"
+
+config OMAP_SSI
+	tristate "OMAP SSI hardware driver"
+	depends on ARCH_OMAP && HSI
+	---help---
+	  SSI is a legacy version of HSI. It is usually used to connect
+	  an application engine with a cellular modem.
+	  If you say Y here, you will enable the OMAP SSI hardware driver.
+
+	  If unsure, say N.
+
+config OMAP_SSI_PORT
+	tristate
+	default m if OMAP_SSI=m
+	default y if OMAP_SSI=y
diff --git a/drivers/hsi/controllers/Makefile b/drivers/hsi/controllers/Makefile
new file mode 100644
index 0000000..d2665cf
--- /dev/null
+++ b/drivers/hsi/controllers/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for HSI controllers drivers
+#
+
+obj-$(CONFIG_OMAP_SSI)		+= omap_ssi.o
+obj-$(CONFIG_OMAP_SSI_PORT)	+= omap_ssi_port.o
diff --git a/drivers/hsi/controllers/omap_ssi.c b/drivers/hsi/controllers/omap_ssi.c
new file mode 100644
index 0000000..3b81484
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi.c
@@ -0,0 +1,618 @@
+/* OMAP SSI driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2013 Sebastian Reichel
+ *
+ * Contact: Carlos Chinea <carlos.chinea@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/omap-dma.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_platform.h>
+#include <linux/hsi/hsi.h>
+#include <linux/idr.h>
+
+#include "omap_ssi_regs.h"
+#include "omap_ssi.h"
+
+/* For automatically allocated device IDs */
+static DEFINE_IDA(platform_omap_ssi_ida);
+
+#ifdef CONFIG_DEBUG_FS
+static int ssi_debug_show(struct seq_file *m, void *p __maybe_unused)
+{
+	struct hsi_controller *ssi = m->private;
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	void __iomem *sys = omap_ssi->sys;
+
+	pm_runtime_get_sync(ssi->device.parent);
+	seq_printf(m, "REVISION\t: 0x%08x\n",  readl(sys + SSI_REVISION_REG));
+	seq_printf(m, "SYSCONFIG\t: 0x%08x\n", readl(sys + SSI_SYSCONFIG_REG));
+	seq_printf(m, "SYSSTATUS\t: 0x%08x\n", readl(sys + SSI_SYSSTATUS_REG));
+	pm_runtime_put_sync(ssi->device.parent);
+
+	return 0;
+}
+
+static int ssi_debug_gdd_show(struct seq_file *m, void *p __maybe_unused)
+{
+	struct hsi_controller *ssi = m->private;
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	void __iomem *gdd = omap_ssi->gdd;
+	void __iomem *sys = omap_ssi->sys;
+	int lch;
+
+	pm_runtime_get_sync(ssi->device.parent);
+
+	seq_printf(m, "GDD_MPU_STATUS\t: 0x%08x\n",
+		readl(sys + SSI_GDD_MPU_IRQ_STATUS_REG));
+	seq_printf(m, "GDD_MPU_ENABLE\t: 0x%08x\n\n",
+		readl(sys + SSI_GDD_MPU_IRQ_ENABLE_REG));
+	seq_printf(m, "HW_ID\t\t: 0x%08x\n",
+				readl(gdd + SSI_GDD_HW_ID_REG));
+	seq_printf(m, "PPORT_ID\t: 0x%08x\n",
+				readl(gdd + SSI_GDD_PPORT_ID_REG));
+	seq_printf(m, "MPORT_ID\t: 0x%08x\n",
+				readl(gdd + SSI_GDD_MPORT_ID_REG));
+	seq_printf(m, "TEST\t\t: 0x%08x\n",
+				readl(gdd + SSI_GDD_TEST_REG));
+	seq_printf(m, "GCR\t\t: 0x%08x\n",
+				readl(gdd + SSI_GDD_GCR_REG));
+
+	for (lch = 0; lch < SSI_MAX_GDD_LCH; lch++) {
+		seq_printf(m, "\nGDD LCH %d\n=========\n", lch);
+		seq_printf(m, "CSDP\t\t: 0x%04x\n",
+				readw(gdd + SSI_GDD_CSDP_REG(lch)));
+		seq_printf(m, "CCR\t\t: 0x%04x\n",
+				readw(gdd + SSI_GDD_CCR_REG(lch)));
+		seq_printf(m, "CICR\t\t: 0x%04x\n",
+				readw(gdd + SSI_GDD_CICR_REG(lch)));
+		seq_printf(m, "CSR\t\t: 0x%04x\n",
+				readw(gdd + SSI_GDD_CSR_REG(lch)));
+		seq_printf(m, "CSSA\t\t: 0x%08x\n",
+				readl(gdd + SSI_GDD_CSSA_REG(lch)));
+		seq_printf(m, "CDSA\t\t: 0x%08x\n",
+				readl(gdd + SSI_GDD_CDSA_REG(lch)));
+		seq_printf(m, "CEN\t\t: 0x%04x\n",
+				readw(gdd + SSI_GDD_CEN_REG(lch)));
+		seq_printf(m, "CSAC\t\t: 0x%04x\n",
+				readw(gdd + SSI_GDD_CSAC_REG(lch)));
+		seq_printf(m, "CDAC\t\t: 0x%04x\n",
+				readw(gdd + SSI_GDD_CDAC_REG(lch)));
+		seq_printf(m, "CLNK_CTRL\t: 0x%04x\n",
+				readw(gdd + SSI_GDD_CLNK_CTRL_REG(lch)));
+	}
+
+	pm_runtime_put_sync(ssi->device.parent);
+
+	return 0;
+}
+
+static int ssi_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ssi_debug_show, inode->i_private);
+}
+
+static int ssi_gdd_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ssi_debug_gdd_show, inode->i_private);
+}
+
+static const struct file_operations ssi_regs_fops = {
+	.open		= ssi_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static const struct file_operations ssi_gdd_regs_fops = {
+	.open		= ssi_gdd_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init ssi_debug_add_ctrl(struct hsi_controller *ssi)
+{
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	struct dentry *dir;
+
+	/* SSI controller */
+	omap_ssi->dir = debugfs_create_dir(dev_name(&ssi->device), NULL);
+	if (IS_ERR(omap_ssi->dir))
+		return PTR_ERR(omap_ssi->dir);
+
+	debugfs_create_file("regs", S_IRUGO, omap_ssi->dir, ssi,
+								&ssi_regs_fops);
+	/* SSI GDD (DMA) */
+	dir = debugfs_create_dir("gdd", omap_ssi->dir);
+	if (IS_ERR(dir))
+		goto rback;
+	debugfs_create_file("regs", S_IRUGO, dir, ssi, &ssi_gdd_regs_fops);
+
+	return 0;
+rback:
+	debugfs_remove_recursive(omap_ssi->dir);
+
+	return PTR_ERR(dir);
+}
+
+static void ssi_debug_remove_ctrl(struct hsi_controller *ssi)
+{
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	debugfs_remove_recursive(omap_ssi->dir);
+}
+#endif /* CONFIG_DEBUG_FS */
+
+/*
+ * FIXME: Horrible HACK needed until we remove the useless wakeline test
+ * in the CMT. To be removed !!!!
+ */
+void ssi_waketest(struct hsi_client *cl, unsigned int enable)
+{
+	struct hsi_port *port = hsi_get_port(cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	omap_port->wktest = !!enable;
+	if (omap_port->wktest) {
+		pm_runtime_get_sync(ssi->device.parent);
+		writel_relaxed(SSI_WAKE(0),
+				omap_ssi->sys + SSI_SET_WAKE_REG(port->num));
+	} else {
+		writel_relaxed(SSI_WAKE(0),
+				omap_ssi->sys +	SSI_CLEAR_WAKE_REG(port->num));
+		pm_runtime_put_sync(ssi->device.parent);
+	}
+}
+EXPORT_SYMBOL_GPL(ssi_waketest);
+
+static void ssi_gdd_complete(struct hsi_controller *ssi, unsigned int lch)
+{
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	struct hsi_msg *msg = omap_ssi->gdd_trn[lch].msg;
+	struct hsi_port *port = to_hsi_port(msg->cl->device.parent);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	unsigned int dir;
+	u32 csr;
+	u32 val;
+
+	spin_lock(&omap_ssi->lock);
+
+	val = readl(omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+	val &= ~SSI_GDD_LCH(lch);
+	writel_relaxed(val, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+
+	if (msg->ttype == HSI_MSG_READ) {
+		dir = DMA_FROM_DEVICE;
+		val = SSI_DATAAVAILABLE(msg->channel);
+		pm_runtime_put_sync(ssi->device.parent);
+	} else {
+		dir = DMA_TO_DEVICE;
+		val = SSI_DATAACCEPT(msg->channel);
+		/* Keep clocks reference for write pio event */
+	}
+	dma_unmap_sg(&ssi->device, msg->sgt.sgl, msg->sgt.nents, dir);
+	csr = readw(omap_ssi->gdd + SSI_GDD_CSR_REG(lch));
+	omap_ssi->gdd_trn[lch].msg = NULL; /* release GDD lch */
+	dev_dbg(&port->device, "DMA completed ch %d ttype %d\n",
+				msg->channel, msg->ttype);
+	spin_unlock(&omap_ssi->lock);
+	if (csr & SSI_CSR_TOUR) { /* Timeout error */
+		msg->status = HSI_STATUS_ERROR;
+		msg->actual_len = 0;
+		spin_lock(&omap_port->lock);
+		list_del(&msg->link); /* Dequeue msg */
+		spin_unlock(&omap_port->lock);
+		msg->complete(msg);
+		return;
+	}
+	spin_lock(&omap_port->lock);
+	val |= readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	writel_relaxed(val, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	spin_unlock(&omap_port->lock);
+
+	msg->status = HSI_STATUS_COMPLETED;
+	msg->actual_len = sg_dma_len(msg->sgt.sgl);
+}
+
+static void ssi_gdd_tasklet(unsigned long dev)
+{
+	struct hsi_controller *ssi = (struct hsi_controller *)dev;
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	void __iomem *sys = omap_ssi->sys;
+	unsigned int lch;
+	u32 status_reg;
+
+	pm_runtime_get_sync(ssi->device.parent);
+
+	status_reg = readl(sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+	for (lch = 0; lch < SSI_MAX_GDD_LCH; lch++) {
+		if (status_reg & SSI_GDD_LCH(lch))
+			ssi_gdd_complete(ssi, lch);
+	}
+	writel_relaxed(status_reg, sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+	status_reg = readl(sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+
+	pm_runtime_put_sync(ssi->device.parent);
+
+	if (status_reg)
+		tasklet_hi_schedule(&omap_ssi->gdd_tasklet);
+	else
+		enable_irq(omap_ssi->gdd_irq);
+
+}
+
+static irqreturn_t ssi_gdd_isr(int irq, void *ssi)
+{
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	tasklet_hi_schedule(&omap_ssi->gdd_tasklet);
+	disable_irq_nosync(irq);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned long ssi_get_clk_rate(struct hsi_controller *ssi)
+{
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	unsigned long rate = clk_get_rate(omap_ssi->fck);
+	return rate;
+}
+
+static int __init ssi_get_iomem(struct platform_device *pd,
+		const char *name, void __iomem **pbase, dma_addr_t *phy)
+{
+	struct resource *mem;
+	struct resource *ioarea;
+	void __iomem *base;
+	struct hsi_controller *ssi = platform_get_drvdata(pd);
+
+	mem = platform_get_resource_byname(pd, IORESOURCE_MEM, name);
+	if (!mem) {
+		dev_err(&pd->dev, "IO memory region missing (%s)\n", name);
+		return -ENXIO;
+	}
+	ioarea = devm_request_mem_region(&ssi->device, mem->start,
+					resource_size(mem), dev_name(&pd->dev));
+	if (!ioarea) {
+		dev_err(&pd->dev, "%s IO memory region request failed\n",
+								mem->name);
+		return -ENXIO;
+	}
+	base = devm_ioremap(&ssi->device, mem->start, resource_size(mem));
+	if (!base) {
+		dev_err(&pd->dev, "%s IO remap failed\n", mem->name);
+		return -ENXIO;
+	}
+	*pbase = base;
+
+	if (phy)
+		*phy = mem->start;
+
+	return 0;
+}
+
+static int __init ssi_add_controller(struct hsi_controller *ssi,
+						struct platform_device *pd)
+{
+	struct omap_ssi_controller *omap_ssi;
+	struct resource *irq;
+	int err;
+
+	omap_ssi = devm_kzalloc(&ssi->device, sizeof(*omap_ssi), GFP_KERNEL);
+	if (!omap_ssi) {
+		dev_err(&pd->dev, "not enough memory for omap ssi\n");
+		return -ENOMEM;
+	}
+
+	ssi->id = ida_simple_get(&platform_omap_ssi_ida, 0, 0, GFP_KERNEL);
+	if (ssi->id < 0) {
+		err = ssi->id;
+		goto out_err;
+	}
+
+	ssi->owner = THIS_MODULE;
+	ssi->device.parent = &pd->dev;
+	dev_set_name(&ssi->device, "ssi%d", ssi->id);
+	hsi_controller_set_drvdata(ssi, omap_ssi);
+	omap_ssi->dev = &ssi->device;
+	err = ssi_get_iomem(pd, "sys", &omap_ssi->sys, NULL);
+	if (err < 0)
+		goto out_err;
+	err = ssi_get_iomem(pd, "gdd", &omap_ssi->gdd, NULL);
+	if (err < 0)
+		goto out_err;
+	irq = platform_get_resource_byname(pd, IORESOURCE_IRQ, "gdd_mpu");
+	if (!irq) {
+		dev_err(&pd->dev, "GDD IRQ resource missing\n");
+		err = -ENXIO;
+		goto out_err;
+	}
+	omap_ssi->gdd_irq = irq->start;
+	tasklet_init(&omap_ssi->gdd_tasklet, ssi_gdd_tasklet,
+							(unsigned long)ssi);
+	err = devm_request_irq(&ssi->device, omap_ssi->gdd_irq, ssi_gdd_isr,
+						0, irq->name, ssi);
+	if (err < 0) {
+		dev_err(&ssi->device, "Request GDD IRQ %d failed (%d)",
+							omap_ssi->gdd_irq, err);
+		goto out_err;
+	}
+
+	omap_ssi->port = devm_kzalloc(&ssi->device,
+		sizeof(struct omap_ssi_port *) * ssi->num_ports, GFP_KERNEL);
+	if (!omap_ssi->port) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	omap_ssi->fck = devm_clk_get(&ssi->device, "ssi_ssr_fck");
+	if (IS_ERR(omap_ssi->fck)) {
+		dev_err(&pd->dev, "Could not acquire clock \"ssi_ssr_fck\": %li\n",
+			PTR_ERR(omap_ssi->fck));
+		err = -ENODEV;
+		goto out_err;
+	}
+
+	/* TODO: find register, which can be used to detect context loss */
+	omap_ssi->get_loss = NULL;
+
+	omap_ssi->max_speed = UINT_MAX;
+	spin_lock_init(&omap_ssi->lock);
+	err = hsi_register_controller(ssi);
+
+	if (err < 0)
+		goto out_err;
+
+	return 0;
+
+out_err:
+	ida_simple_remove(&platform_omap_ssi_ida, ssi->id);
+	return err;
+}
+
+static int __init ssi_hw_init(struct hsi_controller *ssi)
+{
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	unsigned int i;
+	u32 val;
+	int err;
+
+	err = pm_runtime_get_sync(ssi->device.parent);
+	if (err < 0) {
+		dev_err(&ssi->device, "runtime PM failed %d\n", err);
+		return err;
+	}
+	/* Reseting SSI controller */
+	writel_relaxed(SSI_SOFTRESET, omap_ssi->sys + SSI_SYSCONFIG_REG);
+	val = readl(omap_ssi->sys + SSI_SYSSTATUS_REG);
+	for (i = 0; ((i < 20) && !(val & SSI_RESETDONE)); i++) {
+		msleep(20);
+		val = readl(omap_ssi->sys + SSI_SYSSTATUS_REG);
+	}
+	if (!(val & SSI_RESETDONE)) {
+		dev_err(&ssi->device, "SSI HW reset failed\n");
+		pm_runtime_put_sync(ssi->device.parent);
+		return -EIO;
+	}
+	/* Reseting GDD */
+	writel_relaxed(SSI_SWRESET, omap_ssi->gdd + SSI_GDD_GRST_REG);
+	/* Get FCK rate in KHz */
+	omap_ssi->fck_rate = DIV_ROUND_CLOSEST(ssi_get_clk_rate(ssi), 1000);
+	dev_dbg(&ssi->device, "SSI fck rate %lu KHz\n", omap_ssi->fck_rate);
+	/* Set default PM settings */
+	val = SSI_AUTOIDLE | SSI_SIDLEMODE_SMART | SSI_MIDLEMODE_SMART;
+	writel_relaxed(val, omap_ssi->sys + SSI_SYSCONFIG_REG);
+	omap_ssi->sysconfig = val;
+	writel_relaxed(SSI_CLK_AUTOGATING_ON, omap_ssi->sys + SSI_GDD_GCR_REG);
+	omap_ssi->gdd_gcr = SSI_CLK_AUTOGATING_ON;
+	pm_runtime_put_sync(ssi->device.parent);
+
+	return 0;
+}
+
+static void ssi_remove_controller(struct hsi_controller *ssi)
+{
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	int id = ssi->id;
+	tasklet_kill(&omap_ssi->gdd_tasklet);
+	hsi_unregister_controller(ssi);
+	ida_simple_remove(&platform_omap_ssi_ida, id);
+}
+
+static inline int ssi_of_get_available_child_count(const struct device_node *np)
+{
+	struct device_node *child;
+	int num = 0;
+
+	for_each_child_of_node(np, child)
+		if (of_device_is_available(child))
+			num++;
+
+	return num;
+}
+
+static int __init ssi_probe(struct platform_device *pd)
+{
+	struct device_node *np = pd->dev.of_node;
+	struct hsi_controller *ssi;
+	int err;
+	int num_ports;
+
+	if (!np) {
+		dev_err(&pd->dev, "missing device tree data\n");
+		return -EINVAL;
+	}
+
+	num_ports = ssi_of_get_available_child_count(np);
+
+	ssi = hsi_alloc_controller(num_ports, GFP_KERNEL);
+	if (!ssi) {
+		dev_err(&pd->dev, "No memory for controller\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pd, ssi);
+
+	err = ssi_add_controller(ssi, pd);
+	if (err < 0)
+		goto out1;
+
+	pm_runtime_enable(&pd->dev);
+
+	err = ssi_hw_init(ssi);
+	if (err < 0)
+		goto out2;
+#ifdef CONFIG_DEBUG_FS
+	err = ssi_debug_add_ctrl(ssi);
+	if (err < 0)
+		goto out2;
+#endif
+
+	err = of_platform_populate(pd->dev.of_node, NULL, NULL, &pd->dev);
+	if (err) {
+		dev_err(&pd->dev, "failed to create ssi controller ports (err=%d)\n",
+			err);
+		return -ENODEV;
+	}
+
+	dev_info(&pd->dev, "ssi controller %d initialized (%d ports)!\n",
+		ssi->id, num_ports);
+	return err;
+out2:
+	ssi_remove_controller(ssi);
+out1:
+	platform_set_drvdata(pd, NULL);
+	pm_runtime_disable(&pd->dev);
+
+	return err;
+}
+
+static int __exit ssi_remove_ports(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	of_device_unregister(pdev);
+
+	return 0;
+}
+
+static int __exit ssi_remove(struct platform_device *pd)
+{
+	struct hsi_controller *ssi = platform_get_drvdata(pd);
+
+#ifdef CONFIG_DEBUG_FS
+	ssi_debug_remove_ctrl(ssi);
+#endif
+	ssi_remove_controller(ssi);
+	platform_set_drvdata(pd, NULL);
+
+	pm_runtime_disable(&pd->dev);
+
+	/* cleanup of of_platform_populate() call */
+	device_for_each_child(&pd->dev, NULL, ssi_remove_ports);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int omap_ssi_runtime_suspend(struct device *dev)
+{
+	struct hsi_controller *ssi = dev_get_drvdata(dev);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	dev_dbg(dev, "runtime suspend!\n");
+
+	if (omap_ssi->get_loss)
+		omap_ssi->loss_count =
+				(*omap_ssi->get_loss)(ssi->device.parent);
+
+	return 0;
+}
+
+static int omap_ssi_runtime_resume(struct device *dev)
+{
+	struct hsi_controller *ssi = dev_get_drvdata(dev);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	dev_dbg(dev, "runtime resume!\n");
+
+	if ((omap_ssi->get_loss) && (omap_ssi->loss_count ==
+				(*omap_ssi->get_loss)(ssi->device.parent)))
+		return 0;
+
+	writel_relaxed(omap_ssi->gdd_gcr, omap_ssi->gdd + SSI_GDD_GCR_REG);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_ssi_pm_ops = {
+	SET_RUNTIME_PM_OPS(omap_ssi_runtime_suspend, omap_ssi_runtime_resume,
+		NULL)
+};
+
+#define DEV_PM_OPS     (&omap_ssi_pm_ops)
+#else
+#define DEV_PM_OPS     NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_ssi_of_match[] = {
+	{ .compatible = "ti,omap3-ssi", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_ssi_of_match);
+#else
+#define omap_ssi_of_match NULL
+#endif
+
+static struct platform_driver ssi_pdriver = {
+	.remove	= __exit_p(ssi_remove),
+	.driver	= {
+		.name	= "omap_ssi",
+		.owner	= THIS_MODULE,
+		.pm     = DEV_PM_OPS,
+		.of_match_table = omap_ssi_of_match,
+	},
+};
+
+module_platform_driver_probe(ssi_pdriver, ssi_probe);
+
+MODULE_ALIAS("platform:omap_ssi");
+MODULE_AUTHOR("Carlos Chinea <carlos.chinea@nokia.com>");
+MODULE_AUTHOR("Sebastian Reichel <sre@debian.org>");
+MODULE_DESCRIPTION("Synchronous Serial Interface Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hsi/controllers/omap_ssi.h b/drivers/hsi/controllers/omap_ssi.h
new file mode 100644
index 0000000..9d05641
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi.h
@@ -0,0 +1,166 @@
+/* OMAP SSI internal interface.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2013 Sebastian Reichel
+ *
+ * Contact: Carlos Chinea <carlos.chinea@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_HSI_OMAP_SSI_H__
+#define __LINUX_HSI_OMAP_SSI_H__
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/hsi/hsi.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define SSI_MAX_CHANNELS	8
+#define SSI_MAX_GDD_LCH		8
+#define SSI_BYTES_TO_FRAMES(x) ((((x) - 1) >> 2) + 1)
+
+/**
+ * struct omap_ssm_ctx - OMAP synchronous serial module (TX/RX) context
+ * @mode: Bit transmission mode
+ * @channels: Number of channels
+ * @framesize: Frame size in bits
+ * @timeout: RX frame timeout
+ * @divisor: TX divider
+ * @arb_mode: Arbitration mode for TX frame (Round robin, priority)
+ */
+struct omap_ssm_ctx {
+	u32	mode;
+	u32	channels;
+	u32	frame_size;
+	union	{
+			u32	timeout; /* Rx Only */
+			struct	{
+					u32	arb_mode;
+					u32	divisor;
+			}; /* Tx only */
+	};
+};
+
+/**
+ * struct omap_ssi_port - OMAP SSI port data
+ * @dev: device associated to the port (HSI port)
+ * @pdev: platform device associated to the port
+ * @sst_dma: SSI transmitter physical base address
+ * @ssr_dma: SSI receiver physical base address
+ * @sst_base: SSI transmitter base address
+ * @ssr_base: SSI receiver base address
+ * @wk_lock: spin lock to serialize access to the wake lines
+ * @lock: Spin lock to serialize access to the SSI port
+ * @channels: Current number of channels configured (1,2,4 or 8)
+ * @txqueue: TX message queues
+ * @rxqueue: RX message queues
+ * @brkqueue: Queue of incoming HWBREAK requests (FRAME mode)
+ * @irq: IRQ number
+ * @wake_irq: IRQ number for incoming wake line (-1 if none)
+ * @wake_gpio: GPIO number for incoming wake line (-1 if none)
+ * @pio_tasklet: Bottom half for PIO transfers and events
+ * @wake_tasklet: Bottom half for incoming wake events
+ * @wkin_cken: Keep track of clock references due to the incoming wake line
+ * @wk_refcount: Reference count for output wake line
+ * @sys_mpu_enable: Context for the interrupt enable register for irq 0
+ * @sst: Context for the synchronous serial transmitter
+ * @ssr: Context for the synchronous serial receiver
+ */
+struct omap_ssi_port {
+	struct device		*dev;
+	struct device           *pdev;
+	dma_addr_t		sst_dma;
+	dma_addr_t		ssr_dma;
+	void __iomem		*sst_base;
+	void __iomem		*ssr_base;
+	spinlock_t		wk_lock;
+	spinlock_t		lock;
+	unsigned int		channels;
+	struct list_head	txqueue[SSI_MAX_CHANNELS];
+	struct list_head	rxqueue[SSI_MAX_CHANNELS];
+	struct list_head	brkqueue;
+	unsigned int		irq;
+	int			wake_irq;
+	int			wake_gpio;
+	struct tasklet_struct	pio_tasklet;
+	struct tasklet_struct	wake_tasklet;
+	bool			wktest:1; /* FIXME: HACK to be removed */
+	bool			wkin_cken:1; /* Workaround */
+	unsigned int		wk_refcount;
+	/* OMAP SSI port context */
+	u32			sys_mpu_enable; /* We use only one irq */
+	struct omap_ssm_ctx	sst;
+	struct omap_ssm_ctx	ssr;
+	u32			loss_count;
+	u32			port_id;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *dir;
+#endif
+};
+
+/**
+ * struct gdd_trn - GDD transaction data
+ * @msg: Pointer to the HSI message being served
+ * @sg: Pointer to the current sg entry being served
+ */
+struct gdd_trn {
+	struct hsi_msg		*msg;
+	struct scatterlist	*sg;
+};
+
+/**
+ * struct omap_ssi_controller - OMAP SSI controller data
+ * @dev: device associated to the controller (HSI controller)
+ * @sys: SSI I/O base address
+ * @gdd: GDD I/O base address
+ * @fck: SSI functional clock
+ * @gdd_irq: IRQ line for GDD
+ * @gdd_tasklet: bottom half for DMA transfers
+ * @gdd_trn: Array of GDD transaction data for ongoing GDD transfers
+ * @lock: lock to serialize access to GDD
+ * @loss_count: To follow if we need to restore context or not
+ * @max_speed: Maximum TX speed (Kb/s) set by the clients.
+ * @sysconfig: SSI controller saved context
+ * @gdd_gcr: SSI GDD saved context
+ * @get_loss: Pointer to omap_pm_get_dev_context_loss_count, if any
+ * @port: Array of pointers of the ports of the controller
+ * @dir: Debugfs SSI root directory
+ */
+struct omap_ssi_controller {
+	struct device		*dev;
+	void __iomem		*sys;
+	void __iomem		*gdd;
+	struct clk		*fck;
+	unsigned int		gdd_irq;
+	struct tasklet_struct	gdd_tasklet;
+	struct gdd_trn		gdd_trn[SSI_MAX_GDD_LCH];
+	spinlock_t		lock;
+	unsigned long		fck_rate;
+	u32			loss_count;
+	u32			max_speed;
+	/* OMAP SSI Controller context */
+	u32			sysconfig;
+	u32			gdd_gcr;
+	int			(*get_loss)(struct device *dev);
+	struct omap_ssi_port	**port;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *dir;
+#endif
+};
+
+#endif /* __LINUX_HSI_OMAP_SSI_H__ */
diff --git a/drivers/hsi/controllers/omap_ssi_port.c b/drivers/hsi/controllers/omap_ssi_port.c
new file mode 100644
index 0000000..6253607
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi_port.c
@@ -0,0 +1,1400 @@
+/* OMAP SSI port driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2013 Sebastian Reichel
+ *
+ * Contact: Carlos Chinea <carlos.chinea@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/of_gpio.h>
+#include <linux/debugfs.h>
+
+#include "omap_ssi_regs.h"
+#include "omap_ssi.h"
+
+static inline int hsi_dummy_msg(struct hsi_msg *msg __maybe_unused)
+{
+	return 0;
+}
+
+static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused)
+{
+	return 0;
+}
+
+static inline unsigned int ssi_wakein(struct hsi_port *port)
+{
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	return gpio_get_value(omap_port->wake_gpio);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void ssi_debug_remove_port(struct hsi_port *port)
+{
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+
+	debugfs_remove_recursive(omap_port->dir);
+}
+
+static int ssi_debug_port_show(struct seq_file *m, void *p __maybe_unused)
+{
+	struct hsi_port *port = m->private;
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	void __iomem	*base = omap_ssi->sys;
+	unsigned int ch;
+
+	pm_runtime_get_sync(omap_port->pdev);
+	if (omap_port->wake_irq > 0)
+		seq_printf(m, "CAWAKE\t\t: %d\n", ssi_wakein(port));
+	seq_printf(m, "WAKE\t\t: 0x%08x\n",
+				readl(base + SSI_WAKE_REG(port->num)));
+	seq_printf(m, "MPU_ENABLE_IRQ%d\t: 0x%08x\n", 0,
+			readl(base + SSI_MPU_ENABLE_REG(port->num, 0)));
+	seq_printf(m, "MPU_STATUS_IRQ%d\t: 0x%08x\n", 0,
+			readl(base + SSI_MPU_STATUS_REG(port->num, 0)));
+	/* SST */
+	base = omap_port->sst_base;
+	seq_puts(m, "\nSST\n===\n");
+	seq_printf(m, "ID SST\t\t: 0x%08x\n",
+				readl(base + SSI_SST_ID_REG));
+	seq_printf(m, "MODE\t\t: 0x%08x\n",
+				readl(base + SSI_SST_MODE_REG));
+	seq_printf(m, "FRAMESIZE\t: 0x%08x\n",
+				readl(base + SSI_SST_FRAMESIZE_REG));
+	seq_printf(m, "DIVISOR\t\t: 0x%08x\n",
+				readl(base + SSI_SST_DIVISOR_REG));
+	seq_printf(m, "CHANNELS\t: 0x%08x\n",
+				readl(base + SSI_SST_CHANNELS_REG));
+	seq_printf(m, "ARBMODE\t\t: 0x%08x\n",
+				readl(base + SSI_SST_ARBMODE_REG));
+	seq_printf(m, "TXSTATE\t\t: 0x%08x\n",
+				readl(base + SSI_SST_TXSTATE_REG));
+	seq_printf(m, "BUFSTATE\t: 0x%08x\n",
+				readl(base + SSI_SST_BUFSTATE_REG));
+	seq_printf(m, "BREAK\t\t: 0x%08x\n",
+				readl(base + SSI_SST_BREAK_REG));
+	for (ch = 0; ch < omap_port->channels; ch++) {
+		seq_printf(m, "BUFFER_CH%d\t: 0x%08x\n", ch,
+				readl(base + SSI_SST_BUFFER_CH_REG(ch)));
+	}
+	/* SSR */
+	base = omap_port->ssr_base;
+	seq_puts(m, "\nSSR\n===\n");
+	seq_printf(m, "ID SSR\t\t: 0x%08x\n",
+				readl(base + SSI_SSR_ID_REG));
+	seq_printf(m, "MODE\t\t: 0x%08x\n",
+				readl(base + SSI_SSR_MODE_REG));
+	seq_printf(m, "FRAMESIZE\t: 0x%08x\n",
+				readl(base + SSI_SSR_FRAMESIZE_REG));
+	seq_printf(m, "CHANNELS\t: 0x%08x\n",
+				readl(base + SSI_SSR_CHANNELS_REG));
+	seq_printf(m, "TIMEOUT\t\t: 0x%08x\n",
+				readl(base + SSI_SSR_TIMEOUT_REG));
+	seq_printf(m, "RXSTATE\t\t: 0x%08x\n",
+				readl(base + SSI_SSR_RXSTATE_REG));
+	seq_printf(m, "BUFSTATE\t: 0x%08x\n",
+				readl(base + SSI_SSR_BUFSTATE_REG));
+	seq_printf(m, "BREAK\t\t: 0x%08x\n",
+				readl(base + SSI_SSR_BREAK_REG));
+	seq_printf(m, "ERROR\t\t: 0x%08x\n",
+				readl(base + SSI_SSR_ERROR_REG));
+	seq_printf(m, "ERRORACK\t: 0x%08x\n",
+				readl(base + SSI_SSR_ERRORACK_REG));
+	for (ch = 0; ch < omap_port->channels; ch++) {
+		seq_printf(m, "BUFFER_CH%d\t: 0x%08x\n", ch,
+				readl(base + SSI_SSR_BUFFER_CH_REG(ch)));
+	}
+	pm_runtime_put_sync(omap_port->pdev);
+
+	return 0;
+}
+
+static int ssi_port_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ssi_debug_port_show, inode->i_private);
+}
+
+static const struct file_operations ssi_port_regs_fops = {
+	.open		= ssi_port_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int ssi_div_get(void *data, u64 *val)
+{
+	struct hsi_port *port = data;
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+
+	pm_runtime_get_sync(omap_port->pdev);
+	*val = readl(omap_port->sst_base + SSI_SST_DIVISOR_REG);
+	pm_runtime_put_sync(omap_port->pdev);
+
+	return 0;
+}
+
+static int ssi_div_set(void *data, u64 val)
+{
+	struct hsi_port *port = data;
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+
+	if (val > 127)
+		return -EINVAL;
+
+	pm_runtime_get_sync(omap_port->pdev);
+	writel(val, omap_port->sst_base + SSI_SST_DIVISOR_REG);
+	omap_port->sst.divisor = val;
+	pm_runtime_put_sync(omap_port->pdev);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(ssi_sst_div_fops, ssi_div_get, ssi_div_set, "%llu\n");
+
+static int __init ssi_debug_add_port(struct omap_ssi_port *omap_port,
+							struct dentry *dir)
+{
+	struct hsi_port *port = to_hsi_port(omap_port->dev);
+
+	dir = debugfs_create_dir(dev_name(omap_port->dev), dir);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+	omap_port->dir = dir;
+	debugfs_create_file("regs", S_IRUGO, dir, port, &ssi_port_regs_fops);
+	dir = debugfs_create_dir("sst", dir);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+	debugfs_create_file("divisor", S_IRUGO | S_IWUSR, dir, port,
+							&ssi_sst_div_fops);
+
+	return 0;
+}
+#endif
+
+static int ssi_claim_lch(struct hsi_msg *msg)
+{
+
+	struct hsi_port *port = hsi_get_port(msg->cl);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	int lch;
+
+	for (lch = 0; lch < SSI_MAX_GDD_LCH; lch++)
+		if (!omap_ssi->gdd_trn[lch].msg) {
+			omap_ssi->gdd_trn[lch].msg = msg;
+			omap_ssi->gdd_trn[lch].sg = msg->sgt.sgl;
+			return lch;
+		}
+
+	return -EBUSY;
+}
+
+static int ssi_start_dma(struct hsi_msg *msg, int lch)
+{
+	struct hsi_port *port = hsi_get_port(msg->cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	void __iomem *gdd = omap_ssi->gdd;
+	int err;
+	u16 csdp;
+	u16 ccr;
+	u32 s_addr;
+	u32 d_addr;
+	u32 tmp;
+
+	if (msg->ttype == HSI_MSG_READ) {
+		err = dma_map_sg(&ssi->device, msg->sgt.sgl, msg->sgt.nents,
+							DMA_FROM_DEVICE);
+		if (err < 0) {
+			dev_dbg(&ssi->device, "DMA map SG failed !\n");
+			return err;
+		}
+		csdp = SSI_DST_BURST_4x32_BIT | SSI_DST_MEMORY_PORT |
+			SSI_SRC_SINGLE_ACCESS0 | SSI_SRC_PERIPHERAL_PORT |
+			SSI_DATA_TYPE_S32;
+		ccr = msg->channel + 0x10 + (port->num * 8); /* Sync */
+		ccr |= SSI_DST_AMODE_POSTINC | SSI_SRC_AMODE_CONST |
+			SSI_CCR_ENABLE;
+		s_addr = omap_port->ssr_dma +
+					SSI_SSR_BUFFER_CH_REG(msg->channel);
+		d_addr = sg_dma_address(msg->sgt.sgl);
+	} else {
+		err = dma_map_sg(&ssi->device, msg->sgt.sgl, msg->sgt.nents,
+							DMA_TO_DEVICE);
+		if (err < 0) {
+			dev_dbg(&ssi->device, "DMA map SG failed !\n");
+			return err;
+		}
+		csdp = SSI_SRC_BURST_4x32_BIT | SSI_SRC_MEMORY_PORT |
+			SSI_DST_SINGLE_ACCESS0 | SSI_DST_PERIPHERAL_PORT |
+			SSI_DATA_TYPE_S32;
+		ccr = (msg->channel + 1 + (port->num * 8)) & 0xf; /* Sync */
+		ccr |= SSI_SRC_AMODE_POSTINC | SSI_DST_AMODE_CONST |
+			SSI_CCR_ENABLE;
+		s_addr = sg_dma_address(msg->sgt.sgl);
+		d_addr = omap_port->sst_dma +
+					SSI_SST_BUFFER_CH_REG(msg->channel);
+	}
+	dev_dbg(&ssi->device, "lch %d cdsp %08x ccr %04x s_addr %08x d_addr %08x\n",
+		lch, csdp, ccr, s_addr, d_addr);
+
+	/* Hold clocks during the transfer */
+	pm_runtime_get_sync(omap_port->pdev);
+
+	writew_relaxed(csdp, gdd + SSI_GDD_CSDP_REG(lch));
+	writew_relaxed(SSI_BLOCK_IE | SSI_TOUT_IE, gdd + SSI_GDD_CICR_REG(lch));
+	writel_relaxed(d_addr, gdd + SSI_GDD_CDSA_REG(lch));
+	writel_relaxed(s_addr, gdd + SSI_GDD_CSSA_REG(lch));
+	writew_relaxed(SSI_BYTES_TO_FRAMES(msg->sgt.sgl->length),
+						gdd + SSI_GDD_CEN_REG(lch));
+
+	spin_lock_bh(&omap_ssi->lock);
+	tmp = readl(omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+	tmp |= SSI_GDD_LCH(lch);
+	writel_relaxed(tmp, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+	spin_unlock_bh(&omap_ssi->lock);
+	writew(ccr, gdd + SSI_GDD_CCR_REG(lch));
+	msg->status = HSI_STATUS_PROCEEDING;
+
+	return 0;
+}
+
+static int ssi_start_pio(struct hsi_msg *msg)
+{
+	struct hsi_port *port = hsi_get_port(msg->cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	u32 val;
+
+	pm_runtime_get_sync(omap_port->pdev);
+	if (msg->ttype == HSI_MSG_WRITE) {
+		val = SSI_DATAACCEPT(msg->channel);
+		/* Hold clocks for pio writes */
+		pm_runtime_get_sync(omap_port->pdev);
+	} else {
+		val = SSI_DATAAVAILABLE(msg->channel) | SSI_ERROROCCURED;
+	}
+	dev_dbg(&port->device, "Single %s transfer\n",
+						msg->ttype ? "write" : "read");
+	val |= readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	writel(val, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	pm_runtime_put_sync(omap_port->pdev);
+	msg->actual_len = 0;
+	msg->status = HSI_STATUS_PROCEEDING;
+
+	return 0;
+}
+
+static int ssi_start_transfer(struct list_head *queue)
+{
+	struct hsi_msg *msg;
+	int lch = -1;
+
+	if (list_empty(queue))
+		return 0;
+	msg = list_first_entry(queue, struct hsi_msg, link);
+	if (msg->status != HSI_STATUS_QUEUED)
+		return 0;
+	if ((msg->sgt.nents) && (msg->sgt.sgl->length > sizeof(u32)))
+		lch = ssi_claim_lch(msg);
+	if (lch >= 0)
+		return ssi_start_dma(msg, lch);
+	else
+		return ssi_start_pio(msg);
+}
+
+static int ssi_async_break(struct hsi_msg *msg)
+{
+	struct hsi_port *port = hsi_get_port(msg->cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	int err = 0;
+	u32 tmp;
+
+	pm_runtime_get_sync(omap_port->pdev);
+	if (msg->ttype == HSI_MSG_WRITE) {
+		if (omap_port->sst.mode != SSI_MODE_FRAME) {
+			err = -EINVAL;
+			goto out;
+		}
+		writel(1, omap_port->sst_base + SSI_SST_BREAK_REG);
+		msg->status = HSI_STATUS_COMPLETED;
+		msg->complete(msg);
+	} else {
+		if (omap_port->ssr.mode != SSI_MODE_FRAME) {
+			err = -EINVAL;
+			goto out;
+		}
+		spin_lock_bh(&omap_port->lock);
+		tmp = readl(omap_ssi->sys +
+					SSI_MPU_ENABLE_REG(port->num, 0));
+		writel(tmp | SSI_BREAKDETECTED,
+			omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+		msg->status = HSI_STATUS_PROCEEDING;
+		list_add_tail(&msg->link, &omap_port->brkqueue);
+		spin_unlock_bh(&omap_port->lock);
+	}
+out:
+	pm_runtime_put_sync(omap_port->pdev);
+
+	return err;
+}
+
+static int ssi_async(struct hsi_msg *msg)
+{
+	struct hsi_port *port = hsi_get_port(msg->cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct list_head *queue;
+	int err = 0;
+
+	BUG_ON(!msg);
+
+	if (msg->sgt.nents > 1)
+		return -ENOSYS; /* TODO: Add sg support */
+
+	if (msg->break_frame)
+		return ssi_async_break(msg);
+
+	if (msg->ttype) {
+		BUG_ON(msg->channel >= omap_port->sst.channels);
+		queue = &omap_port->txqueue[msg->channel];
+	} else {
+		BUG_ON(msg->channel >= omap_port->ssr.channels);
+		queue = &omap_port->rxqueue[msg->channel];
+	}
+	msg->status = HSI_STATUS_QUEUED;
+	spin_lock_bh(&omap_port->lock);
+	list_add_tail(&msg->link, queue);
+	err = ssi_start_transfer(queue);
+	if (err < 0) {
+		list_del(&msg->link);
+		msg->status = HSI_STATUS_ERROR;
+	}
+	spin_unlock_bh(&omap_port->lock);
+	dev_dbg(&port->device, "msg status %d ttype %d ch %d\n",
+				msg->status, msg->ttype, msg->channel);
+
+	return err;
+}
+
+static u32 ssi_calculate_div(struct hsi_controller *ssi)
+{
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	u32 tx_fckrate = (u32) omap_ssi->fck_rate;
+
+	/* / 2 : SSI TX clock is always half of the SSI functional clock */
+	tx_fckrate >>= 1;
+	/* Round down when tx_fckrate % omap_ssi->max_speed == 0 */
+	tx_fckrate--;
+	dev_dbg(&ssi->device, "TX div %d for fck_rate %lu Khz speed %d Kb/s\n",
+			tx_fckrate / omap_ssi->max_speed, omap_ssi->fck_rate,
+							omap_ssi->max_speed);
+
+	return tx_fckrate / omap_ssi->max_speed;
+}
+
+static void ssi_flush_queue(struct list_head *queue, struct hsi_client *cl)
+{
+	struct list_head *node, *tmp;
+	struct hsi_msg *msg;
+
+	list_for_each_safe(node, tmp, queue) {
+		msg = list_entry(node, struct hsi_msg, link);
+		if ((cl) && (cl != msg->cl))
+			continue;
+		list_del(node);
+		pr_debug("flush queue: ch %d, msg %p len %d type %d ctxt %p\n",
+			msg->channel, msg, msg->sgt.sgl->length,
+					msg->ttype, msg->context);
+		if (msg->destructor)
+			msg->destructor(msg);
+		else
+			hsi_free_msg(msg);
+	}
+}
+
+static int ssi_setup(struct hsi_client *cl)
+{
+	struct hsi_port *port = to_hsi_port(cl->device.parent);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	void __iomem *sst = omap_port->sst_base;
+	void __iomem *ssr = omap_port->ssr_base;
+	u32 div;
+	u32 val;
+	int err = 0;
+
+	pm_runtime_get_sync(omap_port->pdev);
+	spin_lock_bh(&omap_port->lock);
+	if (cl->tx_cfg.speed)
+		omap_ssi->max_speed = cl->tx_cfg.speed;
+	div = ssi_calculate_div(ssi);
+	if (div > SSI_MAX_DIVISOR) {
+		dev_err(&cl->device, "Invalid TX speed %d Mb/s (div %d)\n",
+						cl->tx_cfg.speed, div);
+		err = -EINVAL;
+		goto out;
+	}
+	/* Set TX/RX module to sleep to stop TX/RX during cfg update */
+	writel_relaxed(SSI_MODE_SLEEP, sst + SSI_SST_MODE_REG);
+	writel_relaxed(SSI_MODE_SLEEP, ssr + SSI_SSR_MODE_REG);
+	/* Flush posted write */
+	val = readl(ssr + SSI_SSR_MODE_REG);
+	/* TX */
+	writel_relaxed(31, sst + SSI_SST_FRAMESIZE_REG);
+	writel_relaxed(div, sst + SSI_SST_DIVISOR_REG);
+	writel_relaxed(cl->tx_cfg.channels, sst + SSI_SST_CHANNELS_REG);
+	writel_relaxed(cl->tx_cfg.arb_mode, sst + SSI_SST_ARBMODE_REG);
+	writel_relaxed(cl->tx_cfg.mode, sst + SSI_SST_MODE_REG);
+	/* RX */
+	writel_relaxed(31, ssr + SSI_SSR_FRAMESIZE_REG);
+	writel_relaxed(cl->rx_cfg.channels, ssr + SSI_SSR_CHANNELS_REG);
+	writel_relaxed(0, ssr + SSI_SSR_TIMEOUT_REG);
+	/* Cleanup the break queue if we leave FRAME mode */
+	if ((omap_port->ssr.mode == SSI_MODE_FRAME) &&
+		(cl->rx_cfg.mode != SSI_MODE_FRAME))
+		ssi_flush_queue(&omap_port->brkqueue, cl);
+	writel_relaxed(cl->rx_cfg.mode, ssr + SSI_SSR_MODE_REG);
+	omap_port->channels = max(cl->rx_cfg.channels, cl->tx_cfg.channels);
+	/* Shadow registering for OFF mode */
+	/* SST */
+	omap_port->sst.divisor = div;
+	omap_port->sst.frame_size = 31;
+	omap_port->sst.channels = cl->tx_cfg.channels;
+	omap_port->sst.arb_mode = cl->tx_cfg.arb_mode;
+	omap_port->sst.mode = cl->tx_cfg.mode;
+	/* SSR */
+	omap_port->ssr.frame_size = 31;
+	omap_port->ssr.timeout = 0;
+	omap_port->ssr.channels = cl->rx_cfg.channels;
+	omap_port->ssr.mode = cl->rx_cfg.mode;
+out:
+	spin_unlock_bh(&omap_port->lock);
+	pm_runtime_put_sync(omap_port->pdev);
+
+	return err;
+}
+
+static int ssi_flush(struct hsi_client *cl)
+{
+	struct hsi_port *port = hsi_get_port(cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	struct hsi_msg *msg;
+	void __iomem *sst = omap_port->sst_base;
+	void __iomem *ssr = omap_port->ssr_base;
+	unsigned int i;
+	u32 err;
+
+	pm_runtime_get_sync(omap_port->pdev);
+	spin_lock_bh(&omap_port->lock);
+	/* Stop all DMA transfers */
+	for (i = 0; i < SSI_MAX_GDD_LCH; i++) {
+		msg = omap_ssi->gdd_trn[i].msg;
+		if (!msg || (port != hsi_get_port(msg->cl)))
+			continue;
+		writew_relaxed(0, omap_ssi->gdd + SSI_GDD_CCR_REG(i));
+		if (msg->ttype == HSI_MSG_READ)
+			pm_runtime_put_sync(omap_port->pdev);
+		omap_ssi->gdd_trn[i].msg = NULL;
+	}
+	/* Flush all SST buffers */
+	writel_relaxed(0, sst + SSI_SST_BUFSTATE_REG);
+	writel_relaxed(0, sst + SSI_SST_TXSTATE_REG);
+	/* Flush all SSR buffers */
+	writel_relaxed(0, ssr + SSI_SSR_RXSTATE_REG);
+	writel_relaxed(0, ssr + SSI_SSR_BUFSTATE_REG);
+	/* Flush all errors */
+	err = readl(ssr + SSI_SSR_ERROR_REG);
+	writel_relaxed(err, ssr + SSI_SSR_ERRORACK_REG);
+	/* Flush break */
+	writel_relaxed(0, ssr + SSI_SSR_BREAK_REG);
+	/* Clear interrupts */
+	writel_relaxed(0, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	writel_relaxed(0xffffff00,
+			omap_ssi->sys + SSI_MPU_STATUS_REG(port->num, 0));
+	writel_relaxed(0, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+	writel(0xff, omap_ssi->sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+	/* Dequeue all pending requests */
+	for (i = 0; i < omap_port->channels; i++) {
+		/* Release write clocks */
+		if (!list_empty(&omap_port->txqueue[i]))
+			pm_runtime_put_sync(omap_port->pdev);
+		ssi_flush_queue(&omap_port->txqueue[i], NULL);
+		ssi_flush_queue(&omap_port->rxqueue[i], NULL);
+	}
+	ssi_flush_queue(&omap_port->brkqueue, NULL);
+	spin_unlock_bh(&omap_port->lock);
+	pm_runtime_put_sync(omap_port->pdev);
+
+	return 0;
+}
+
+static int ssi_start_tx(struct hsi_client *cl)
+{
+	struct hsi_port *port = hsi_get_port(cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	dev_dbg(&port->device, "Wake out high %d\n", omap_port->wk_refcount);
+
+	spin_lock_bh(&omap_port->wk_lock);
+	if (omap_port->wk_refcount++) {
+		spin_unlock_bh(&omap_port->wk_lock);
+		return 0;
+	}
+	pm_runtime_get_sync(omap_port->pdev); /* Grab clocks */
+	writel(SSI_WAKE(0), omap_ssi->sys + SSI_SET_WAKE_REG(port->num));
+	spin_unlock_bh(&omap_port->wk_lock);
+
+	return 0;
+}
+
+static int ssi_stop_tx(struct hsi_client *cl)
+{
+	struct hsi_port *port = hsi_get_port(cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	dev_dbg(&port->device, "Wake out low %d\n", omap_port->wk_refcount);
+
+	spin_lock_bh(&omap_port->wk_lock);
+	BUG_ON(!omap_port->wk_refcount);
+	if (--omap_port->wk_refcount) {
+		spin_unlock_bh(&omap_port->wk_lock);
+		return 0;
+	}
+	writel(SSI_WAKE(0),
+				omap_ssi->sys + SSI_CLEAR_WAKE_REG(port->num));
+	pm_runtime_put_sync(omap_port->pdev); /* Release clocks */
+	spin_unlock_bh(&omap_port->wk_lock);
+
+	return 0;
+}
+
+static void ssi_transfer(struct omap_ssi_port *omap_port,
+							struct list_head *queue)
+{
+	struct hsi_msg *msg;
+	int err = -1;
+
+	spin_lock_bh(&omap_port->lock);
+	while (err < 0) {
+		err = ssi_start_transfer(queue);
+		if (err < 0) {
+			msg = list_first_entry(queue, struct hsi_msg, link);
+			msg->status = HSI_STATUS_ERROR;
+			msg->actual_len = 0;
+			list_del(&msg->link);
+			spin_unlock_bh(&omap_port->lock);
+			msg->complete(msg);
+			spin_lock_bh(&omap_port->lock);
+		}
+	}
+	spin_unlock_bh(&omap_port->lock);
+}
+
+static void ssi_cleanup_queues(struct hsi_client *cl)
+{
+	struct hsi_port *port = hsi_get_port(cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	struct hsi_msg *msg;
+	unsigned int i;
+	u32 rxbufstate = 0;
+	u32 txbufstate = 0;
+	u32 status = SSI_ERROROCCURED;
+	u32 tmp;
+
+	ssi_flush_queue(&omap_port->brkqueue, cl);
+	if (list_empty(&omap_port->brkqueue))
+		status |= SSI_BREAKDETECTED;
+
+	for (i = 0; i < omap_port->channels; i++) {
+		if (list_empty(&omap_port->txqueue[i]))
+			continue;
+		msg = list_first_entry(&omap_port->txqueue[i], struct hsi_msg,
+									link);
+		if ((msg->cl == cl) && (msg->status == HSI_STATUS_PROCEEDING)) {
+			txbufstate |= (1 << i);
+			status |= SSI_DATAACCEPT(i);
+			/* Release the clocks writes, also GDD ones */
+			pm_runtime_put_sync(omap_port->pdev);
+		}
+		ssi_flush_queue(&omap_port->txqueue[i], cl);
+	}
+	for (i = 0; i < omap_port->channels; i++) {
+		if (list_empty(&omap_port->rxqueue[i]))
+			continue;
+		msg = list_first_entry(&omap_port->rxqueue[i], struct hsi_msg,
+									link);
+		if ((msg->cl == cl) && (msg->status == HSI_STATUS_PROCEEDING)) {
+			rxbufstate |= (1 << i);
+			status |= SSI_DATAAVAILABLE(i);
+		}
+		ssi_flush_queue(&omap_port->rxqueue[i], cl);
+		/* Check if we keep the error detection interrupt armed */
+		if (!list_empty(&omap_port->rxqueue[i]))
+			status &= ~SSI_ERROROCCURED;
+	}
+	/* Cleanup write buffers */
+	tmp = readl(omap_port->sst_base + SSI_SST_BUFSTATE_REG);
+	tmp &= ~txbufstate;
+	writel_relaxed(tmp, omap_port->sst_base + SSI_SST_BUFSTATE_REG);
+	/* Cleanup read buffers */
+	tmp = readl(omap_port->ssr_base + SSI_SSR_BUFSTATE_REG);
+	tmp &= ~rxbufstate;
+	writel_relaxed(tmp, omap_port->ssr_base + SSI_SSR_BUFSTATE_REG);
+	/* Disarm and ack pending interrupts */
+	tmp = readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	tmp &= ~status;
+	writel_relaxed(tmp, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	writel_relaxed(status, omap_ssi->sys +
+		SSI_MPU_STATUS_REG(port->num, 0));
+}
+
+static void ssi_cleanup_gdd(struct hsi_controller *ssi, struct hsi_client *cl)
+{
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	struct hsi_port *port = hsi_get_port(cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_msg *msg;
+	unsigned int i;
+	u32 val = 0;
+	u32 tmp;
+
+	for (i = 0; i < SSI_MAX_GDD_LCH; i++) {
+		msg = omap_ssi->gdd_trn[i].msg;
+		if ((!msg) || (msg->cl != cl))
+			continue;
+		writew_relaxed(0, omap_ssi->gdd + SSI_GDD_CCR_REG(i));
+		val |= (1 << i);
+		/*
+		 * Clock references for write will be handled in
+		 * ssi_cleanup_queues
+		 */
+		if (msg->ttype == HSI_MSG_READ)
+			pm_runtime_put_sync(omap_port->pdev);
+		omap_ssi->gdd_trn[i].msg = NULL;
+	}
+	tmp = readl_relaxed(omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+	tmp &= ~val;
+	writel_relaxed(tmp, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+	writel(val, omap_ssi->sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+}
+
+static int ssi_set_port_mode(struct omap_ssi_port *omap_port, u32 mode)
+{
+	writel(mode, omap_port->sst_base + SSI_SST_MODE_REG);
+	writel(mode, omap_port->ssr_base + SSI_SSR_MODE_REG);
+	/* OCP barrier */
+	mode = readl(omap_port->ssr_base + SSI_SSR_MODE_REG);
+
+	return 0;
+}
+
+static int ssi_release(struct hsi_client *cl)
+{
+	struct hsi_port *port = hsi_get_port(cl);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+
+	spin_lock_bh(&omap_port->lock);
+	pm_runtime_get_sync(omap_port->pdev);
+	/* Stop all the pending DMA requests for that client */
+	ssi_cleanup_gdd(ssi, cl);
+	/* Now cleanup all the queues */
+	ssi_cleanup_queues(cl);
+	pm_runtime_put_sync(omap_port->pdev);
+	/* If it is the last client of the port, do extra checks and cleanup */
+	if (port->claimed <= 1) {
+		/*
+		 * Drop the clock reference for the incoming wake line
+		 * if it is still kept high by the other side.
+		 */
+		if (omap_port->wkin_cken) {
+			pm_runtime_put_sync(omap_port->pdev);
+			omap_port->wkin_cken = 0;
+		}
+		pm_runtime_get_sync(omap_port->pdev);
+		/* Stop any SSI TX/RX without a client */
+		ssi_set_port_mode(omap_port, SSI_MODE_SLEEP);
+		omap_port->sst.mode = SSI_MODE_SLEEP;
+		omap_port->ssr.mode = SSI_MODE_SLEEP;
+		pm_runtime_put_sync(omap_port->pdev);
+		WARN_ON(omap_port->wk_refcount != 0);
+	}
+	spin_unlock_bh(&omap_port->lock);
+
+	return 0;
+}
+
+
+
+static void ssi_error(struct hsi_port *port)
+{
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	struct hsi_msg *msg;
+	unsigned int i;
+	u32 err;
+	u32 val;
+	u32 tmp;
+
+	/* ACK error */
+	err = readl(omap_port->ssr_base + SSI_SSR_ERROR_REG);
+	dev_err(&port->device, "SSI error: 0x%02x\n", err);
+	if (!err) {
+		dev_dbg(&port->device, "spurious SSI error ignored!\n");
+		return;
+	}
+	spin_lock(&omap_ssi->lock);
+	/* Cancel all GDD read transfers */
+	for (i = 0, val = 0; i < SSI_MAX_GDD_LCH; i++) {
+		msg = omap_ssi->gdd_trn[i].msg;
+		if ((msg) && (msg->ttype == HSI_MSG_READ)) {
+			writew_relaxed(0, omap_ssi->gdd + SSI_GDD_CCR_REG(i));
+			val |= (1 << i);
+			omap_ssi->gdd_trn[i].msg = NULL;
+		}
+	}
+	tmp = readl(omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+	tmp &= ~val;
+	writel_relaxed(tmp, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+	spin_unlock(&omap_ssi->lock);
+	/* Cancel all PIO read transfers */
+	spin_lock(&omap_port->lock);
+	tmp = readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	tmp &= 0xfeff00ff; /* Disable error & all dataavailable interrupts */
+	writel_relaxed(tmp, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	/* ACK error */
+	writel_relaxed(err, omap_port->ssr_base + SSI_SSR_ERRORACK_REG);
+	writel_relaxed(SSI_ERROROCCURED,
+			omap_ssi->sys + SSI_MPU_STATUS_REG(port->num, 0));
+	/* Signal the error all current pending read requests */
+	for (i = 0; i < omap_port->channels; i++) {
+		if (list_empty(&omap_port->rxqueue[i]))
+			continue;
+		msg = list_first_entry(&omap_port->rxqueue[i], struct hsi_msg,
+									link);
+		list_del(&msg->link);
+		msg->status = HSI_STATUS_ERROR;
+		spin_unlock(&omap_port->lock);
+		msg->complete(msg);
+		/* Now restart queued reads if any */
+		ssi_transfer(omap_port, &omap_port->rxqueue[i]);
+		spin_lock(&omap_port->lock);
+	}
+	spin_unlock(&omap_port->lock);
+}
+
+static void ssi_break_complete(struct hsi_port *port)
+{
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	struct hsi_msg *msg;
+	struct hsi_msg *tmp;
+	u32 val;
+
+	dev_dbg(&port->device, "HWBREAK received\n");
+
+	spin_lock(&omap_port->lock);
+	val = readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	val &= ~SSI_BREAKDETECTED;
+	writel_relaxed(val, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	writel_relaxed(0, omap_port->ssr_base + SSI_SSR_BREAK_REG);
+	writel(SSI_BREAKDETECTED,
+			omap_ssi->sys + SSI_MPU_STATUS_REG(port->num, 0));
+	spin_unlock(&omap_port->lock);
+
+	list_for_each_entry_safe(msg, tmp, &omap_port->brkqueue, link) {
+		msg->status = HSI_STATUS_COMPLETED;
+		spin_lock(&omap_port->lock);
+		list_del(&msg->link);
+		spin_unlock(&omap_port->lock);
+		msg->complete(msg);
+	}
+
+}
+
+static void ssi_pio_complete(struct hsi_port *port, struct list_head *queue)
+{
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_msg *msg;
+	u32 *buf;
+	u32 reg;
+	u32 val;
+
+	spin_lock(&omap_port->lock);
+	msg = list_first_entry(queue, struct hsi_msg, link);
+	if ((!msg->sgt.nents) || (!msg->sgt.sgl->length)) {
+		msg->actual_len = 0;
+		msg->status = HSI_STATUS_PENDING;
+	}
+	if (msg->ttype == HSI_MSG_WRITE)
+		val = SSI_DATAACCEPT(msg->channel);
+	else
+		val = SSI_DATAAVAILABLE(msg->channel);
+	if (msg->status == HSI_STATUS_PROCEEDING) {
+		buf = sg_virt(msg->sgt.sgl) + msg->actual_len;
+		if (msg->ttype == HSI_MSG_WRITE)
+			writel(*buf, omap_port->sst_base +
+					SSI_SST_BUFFER_CH_REG(msg->channel));
+		 else
+			*buf = readl(omap_port->ssr_base +
+					SSI_SSR_BUFFER_CH_REG(msg->channel));
+		dev_dbg(&port->device, "ch %d ttype %d 0x%08x\n", msg->channel,
+							msg->ttype, *buf);
+		msg->actual_len += sizeof(*buf);
+		if (msg->actual_len >= msg->sgt.sgl->length)
+			msg->status = HSI_STATUS_COMPLETED;
+		/*
+		 * Wait for the last written frame to be really sent before
+		 * we call the complete callback
+		 */
+		if ((msg->status == HSI_STATUS_PROCEEDING) ||
+				((msg->status == HSI_STATUS_COMPLETED) &&
+					(msg->ttype == HSI_MSG_WRITE))) {
+			writel(val, omap_ssi->sys +
+					SSI_MPU_STATUS_REG(port->num, 0));
+			spin_unlock(&omap_port->lock);
+
+			return;
+		}
+
+	}
+	/* Transfer completed at this point */
+	reg = readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	if (msg->ttype == HSI_MSG_WRITE) {
+		/* Release clocks for write transfer */
+		pm_runtime_put_sync(omap_port->pdev);
+	}
+	reg &= ~val;
+	writel_relaxed(reg, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	writel_relaxed(val, omap_ssi->sys + SSI_MPU_STATUS_REG(port->num, 0));
+	list_del(&msg->link);
+	spin_unlock(&omap_port->lock);
+	msg->complete(msg);
+	ssi_transfer(omap_port, queue);
+}
+
+static void ssi_pio_tasklet(unsigned long ssi_port)
+{
+	struct hsi_port *port = (struct hsi_port *)ssi_port;
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	void __iomem *sys = omap_ssi->sys;
+	unsigned int ch;
+	u32 status_reg;
+
+	pm_runtime_get_sync(omap_port->pdev);
+	status_reg = readl(sys + SSI_MPU_STATUS_REG(port->num, 0));
+	status_reg &= readl(sys + SSI_MPU_ENABLE_REG(port->num, 0));
+
+	for (ch = 0; ch < omap_port->channels; ch++) {
+		if (status_reg & SSI_DATAACCEPT(ch))
+			ssi_pio_complete(port, &omap_port->txqueue[ch]);
+		if (status_reg & SSI_DATAAVAILABLE(ch))
+			ssi_pio_complete(port, &omap_port->rxqueue[ch]);
+	}
+	if (status_reg & SSI_BREAKDETECTED)
+		ssi_break_complete(port);
+	if (status_reg & SSI_ERROROCCURED)
+		ssi_error(port);
+
+	status_reg = readl(sys + SSI_MPU_STATUS_REG(port->num, 0));
+	status_reg &= readl(sys + SSI_MPU_ENABLE_REG(port->num, 0));
+	pm_runtime_put_sync(omap_port->pdev);
+
+	if (status_reg)
+		tasklet_hi_schedule(&omap_port->pio_tasklet);
+	else
+		enable_irq(omap_port->irq);
+}
+
+static irqreturn_t ssi_pio_isr(int irq, void *port)
+{
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+
+	tasklet_hi_schedule(&omap_port->pio_tasklet);
+	disable_irq_nosync(irq);
+
+	return IRQ_HANDLED;
+}
+
+static void ssi_wake_tasklet(unsigned long ssi_port)
+{
+	struct hsi_port *port = (struct hsi_port *)ssi_port;
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	if (ssi_wakein(port)) {
+		/**
+		 * We can have a quick High-Low-High transition in the line.
+		 * In such a case if we have long interrupt latencies,
+		 * we can miss the low event or get twice a high event.
+		 * This workaround will avoid breaking the clock reference
+		 * count when such a situation ocurrs.
+		 */
+		spin_lock(&omap_port->lock);
+		if (!omap_port->wkin_cken) {
+			omap_port->wkin_cken = 1;
+			pm_runtime_get_sync(omap_port->pdev);
+		}
+		spin_unlock(&omap_port->lock);
+		dev_dbg(&ssi->device, "Wake in high\n");
+		if (omap_port->wktest) { /* FIXME: HACK ! To be removed */
+			writel(SSI_WAKE(0),
+				omap_ssi->sys + SSI_SET_WAKE_REG(port->num));
+		}
+		hsi_event(port, HSI_EVENT_START_RX);
+	} else {
+		dev_dbg(&ssi->device, "Wake in low\n");
+		if (omap_port->wktest) { /* FIXME: HACK ! To be removed */
+			writel(SSI_WAKE(0),
+				omap_ssi->sys + SSI_CLEAR_WAKE_REG(port->num));
+		}
+		hsi_event(port, HSI_EVENT_STOP_RX);
+		spin_lock(&omap_port->lock);
+		if (omap_port->wkin_cken) {
+			pm_runtime_put_sync(omap_port->pdev);
+			omap_port->wkin_cken = 0;
+		}
+		spin_unlock(&omap_port->lock);
+	}
+}
+
+static irqreturn_t ssi_wake_isr(int irq __maybe_unused, void *ssi_port)
+{
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(ssi_port);
+
+	tasklet_hi_schedule(&omap_port->wake_tasklet);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ssi_port_irq(struct hsi_port *port,
+						struct platform_device *pd)
+{
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct resource *irq;
+	int err;
+
+	irq = platform_get_resource_byname(pd, IORESOURCE_IRQ, "mpu_irq0");
+	if (!irq) {
+		dev_err(&port->device, "Port IRQ resource missing\n");
+		return -ENXIO;
+	}
+	omap_port->irq = irq->start;
+	tasklet_init(&omap_port->pio_tasklet, ssi_pio_tasklet,
+							(unsigned long)port);
+	err = devm_request_irq(&port->device, omap_port->irq, ssi_pio_isr,
+						0, irq->name, port);
+	if (err < 0)
+		dev_err(&port->device, "Request IRQ %d failed (%d)\n",
+							omap_port->irq, err);
+	return err;
+}
+
+static int __init ssi_wake_irq(struct hsi_port *port,
+						struct platform_device *pd)
+{
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	int cawake_irq;
+	int err;
+
+	if (omap_port->wake_gpio == -1) {
+		omap_port->wake_irq = -1;
+		return 0;
+	}
+
+	cawake_irq = gpio_to_irq(omap_port->wake_gpio);
+
+	omap_port->wake_irq = cawake_irq;
+	tasklet_init(&omap_port->wake_tasklet, ssi_wake_tasklet,
+							(unsigned long)port);
+	err = devm_request_irq(&port->device, cawake_irq, ssi_wake_isr,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+							"cawake", port);
+	if (err < 0)
+		dev_err(&port->device, "Request Wake in IRQ %d failed %d\n",
+						cawake_irq, err);
+	err = enable_irq_wake(cawake_irq);
+	if (err < 0)
+		dev_err(&port->device, "Enable wake on the wakeline in irq %d failed %d\n",
+			cawake_irq, err);
+
+	return err;
+}
+
+static void __init ssi_queues_init(struct omap_ssi_port *omap_port)
+{
+	unsigned int ch;
+
+	for (ch = 0; ch < SSI_MAX_CHANNELS; ch++) {
+		INIT_LIST_HEAD(&omap_port->txqueue[ch]);
+		INIT_LIST_HEAD(&omap_port->rxqueue[ch]);
+	}
+	INIT_LIST_HEAD(&omap_port->brkqueue);
+}
+
+static int __init ssi_port_get_iomem(struct platform_device *pd,
+		const char *name, void __iomem **pbase, dma_addr_t *phy)
+{
+	struct hsi_port *port = platform_get_drvdata(pd);
+	struct resource *mem;
+	struct resource *ioarea;
+	void __iomem *base;
+
+	mem = platform_get_resource_byname(pd, IORESOURCE_MEM, name);
+	if (!mem) {
+		dev_err(&pd->dev, "IO memory region missing (%s)\n", name);
+		return -ENXIO;
+	}
+	ioarea = devm_request_mem_region(&port->device, mem->start,
+					resource_size(mem), dev_name(&pd->dev));
+	if (!ioarea) {
+		dev_err(&pd->dev, "%s IO memory region request failed\n",
+								mem->name);
+		return -ENXIO;
+	}
+	base = devm_ioremap(&port->device, mem->start, resource_size(mem));
+	if (!base) {
+		dev_err(&pd->dev, "%s IO remap failed\n", mem->name);
+		return -ENXIO;
+	}
+	*pbase = base;
+
+	if (phy)
+		*phy = mem->start;
+
+	return 0;
+}
+
+static int __init ssi_port_probe(struct platform_device *pd)
+{
+	struct device_node *np = pd->dev.of_node;
+	struct hsi_port *port;
+	struct omap_ssi_port *omap_port;
+	struct hsi_controller *ssi = dev_get_drvdata(pd->dev.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	u32 cawake_gpio = 0;
+	u32 port_id;
+	int err;
+
+	dev_dbg(&pd->dev, "init ssi port...\n");
+
+	err = ref_module(THIS_MODULE, ssi->owner);
+	if (err) {
+		dev_err(&pd->dev, "could not increment parent module refcount (err=%d)\n",
+			err);
+		return -ENODEV;
+	}
+
+	if (!ssi->port || !omap_ssi->port) {
+		dev_err(&pd->dev, "ssi controller not initialized!\n");
+		err = -ENODEV;
+		goto error;
+	}
+
+	/* get id of first uninitialized port in controller */
+	for (port_id = 0; port_id < ssi->num_ports && omap_ssi->port[port_id];
+		port_id++)
+		;
+
+	if (port_id >= ssi->num_ports) {
+		dev_err(&pd->dev, "port id out of range!\n");
+		err = -ENODEV;
+		goto error;
+	}
+
+	port = ssi->port[port_id];
+
+	if (!np) {
+		dev_err(&pd->dev, "missing device tree data\n");
+		err = -EINVAL;
+		goto error;
+	}
+
+	cawake_gpio = of_get_named_gpio(np, "ti,ssi-cawake-gpio", 0);
+	if (cawake_gpio < 0) {
+		dev_err(&pd->dev, "DT data is missing cawake gpio (err=%d)\n",
+			cawake_gpio);
+		err = -ENODEV;
+		goto error;
+	}
+
+	err = devm_gpio_request_one(&port->device, cawake_gpio, GPIOF_DIR_IN,
+		"cawake");
+	if (err) {
+		dev_err(&pd->dev, "could not request cawake gpio (err=%d)!\n",
+			err);
+		err = -ENXIO;
+		goto error;
+	}
+
+	omap_port = devm_kzalloc(&port->device, sizeof(*omap_port), GFP_KERNEL);
+	if (!omap_port) {
+		err = -ENOMEM;
+		goto error;
+	}
+	omap_port->wake_gpio = cawake_gpio;
+	omap_port->pdev = &pd->dev;
+	omap_port->port_id = port_id;
+
+	/* initialize HSI port */
+	port->async	= ssi_async;
+	port->setup	= ssi_setup;
+	port->flush	= ssi_flush;
+	port->start_tx	= ssi_start_tx;
+	port->stop_tx	= ssi_stop_tx;
+	port->release	= ssi_release;
+	hsi_port_set_drvdata(port, omap_port);
+	omap_ssi->port[port_id] = omap_port;
+
+	platform_set_drvdata(pd, port);
+
+	err = ssi_port_get_iomem(pd, "tx", &omap_port->sst_base,
+		&omap_port->sst_dma);
+	if (err < 0)
+		goto error;
+	err = ssi_port_get_iomem(pd, "rx", &omap_port->ssr_base,
+		&omap_port->ssr_dma);
+	if (err < 0)
+		goto error;
+
+	err = ssi_port_irq(port, pd);
+	if (err < 0)
+		goto error;
+	err = ssi_wake_irq(port, pd);
+	if (err < 0)
+		goto error;
+
+	ssi_queues_init(omap_port);
+	spin_lock_init(&omap_port->lock);
+	spin_lock_init(&omap_port->wk_lock);
+	omap_port->dev = &port->device;
+
+	pm_runtime_enable(omap_port->pdev);
+
+#ifdef CONFIG_DEBUG_FS
+	err = ssi_debug_add_port(omap_port, omap_ssi->dir);
+	if (err < 0) {
+		pm_runtime_disable(omap_port->pdev);
+		goto error;
+	}
+#endif
+
+	hsi_add_clients_from_dt(port, np);
+
+	dev_info(&pd->dev, "ssi port %u successfully initialized (cawake=%d)\n",
+		port_id, cawake_gpio);
+
+	return 0;
+
+error:
+	return err;
+}
+
+static int __exit ssi_port_remove(struct platform_device *pd)
+{
+	struct hsi_port *port = platform_get_drvdata(pd);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+#ifdef CONFIG_DEBUG_FS
+	ssi_debug_remove_port(port);
+#endif
+
+	hsi_port_unregister_clients(port);
+
+	tasklet_kill(&omap_port->wake_tasklet);
+	tasklet_kill(&omap_port->pio_tasklet);
+
+	port->async	= hsi_dummy_msg;
+	port->setup	= hsi_dummy_cl;
+	port->flush	= hsi_dummy_cl;
+	port->start_tx	= hsi_dummy_cl;
+	port->stop_tx	= hsi_dummy_cl;
+	port->release	= hsi_dummy_cl;
+
+	omap_ssi->port[omap_port->port_id] = NULL;
+	platform_set_drvdata(pd, NULL);
+	pm_runtime_disable(&pd->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int ssi_save_port_ctx(struct omap_ssi_port *omap_port)
+{
+	struct hsi_port *port = to_hsi_port(omap_port->dev);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	omap_port->sys_mpu_enable = readl(omap_ssi->sys +
+					SSI_MPU_ENABLE_REG(port->num, 0));
+
+	return 0;
+}
+
+static int ssi_restore_port_ctx(struct omap_ssi_port *omap_port)
+{
+	struct hsi_port *port = to_hsi_port(omap_port->dev);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+	void __iomem	*base;
+
+	writel_relaxed(omap_port->sys_mpu_enable,
+			omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+
+	/* SST context */
+	base = omap_port->sst_base;
+	writel_relaxed(omap_port->sst.frame_size, base + SSI_SST_FRAMESIZE_REG);
+	writel_relaxed(omap_port->sst.channels, base + SSI_SST_CHANNELS_REG);
+	writel_relaxed(omap_port->sst.arb_mode, base + SSI_SST_ARBMODE_REG);
+
+	/* SSR context */
+	base = omap_port->ssr_base;
+	writel_relaxed(omap_port->ssr.frame_size, base + SSI_SSR_FRAMESIZE_REG);
+	writel_relaxed(omap_port->ssr.channels, base + SSI_SSR_CHANNELS_REG);
+	writel_relaxed(omap_port->ssr.timeout, base + SSI_SSR_TIMEOUT_REG);
+
+	return 0;
+}
+
+static int ssi_restore_port_mode(struct omap_ssi_port *omap_port)
+{
+	u32 mode;
+
+	writel_relaxed(omap_port->sst.mode,
+				omap_port->sst_base + SSI_SST_MODE_REG);
+	writel_relaxed(omap_port->ssr.mode,
+				omap_port->ssr_base + SSI_SSR_MODE_REG);
+	/* OCP barrier */
+	mode = readl(omap_port->ssr_base + SSI_SSR_MODE_REG);
+
+	return 0;
+}
+
+static int ssi_restore_divisor(struct omap_ssi_port *omap_port)
+{
+	writel_relaxed(omap_port->sst.divisor,
+				omap_port->sst_base + SSI_SST_DIVISOR_REG);
+
+	return 0;
+}
+
+static int omap_ssi_port_runtime_suspend(struct device *dev)
+{
+	struct hsi_port *port = dev_get_drvdata(dev);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	dev_dbg(dev, "port runtime suspend!\n");
+
+	ssi_set_port_mode(omap_port, SSI_MODE_SLEEP);
+	if (omap_ssi->get_loss)
+		omap_port->loss_count =
+				(*omap_ssi->get_loss)(ssi->device.parent);
+	ssi_save_port_ctx(omap_port);
+
+	return 0;
+}
+
+static int omap_ssi_port_runtime_resume(struct device *dev)
+{
+	struct hsi_port *port = dev_get_drvdata(dev);
+	struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+	struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+	struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+	dev_dbg(dev, "port runtime resume!\n");
+
+	if ((omap_ssi->get_loss) && (omap_port->loss_count ==
+				(*omap_ssi->get_loss)(ssi->device.parent)))
+		goto mode; /* We always need to restore the mode & TX divisor */
+
+	ssi_restore_port_ctx(omap_port);
+
+mode:
+	ssi_restore_divisor(omap_port);
+	ssi_restore_port_mode(omap_port);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_ssi_port_pm_ops = {
+	SET_RUNTIME_PM_OPS(omap_ssi_port_runtime_suspend,
+		omap_ssi_port_runtime_resume, NULL)
+};
+
+#define DEV_PM_OPS     (&omap_ssi_port_pm_ops)
+#else
+#define DEV_PM_OPS     NULL
+#endif
+
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_ssi_port_of_match[] = {
+	{ .compatible = "ti,omap3-ssi-port", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_ssi_port_of_match);
+#else
+#define omap_ssi_port_of_match NULL
+#endif
+
+static struct platform_driver ssi_port_pdriver = {
+	.remove	= __exit_p(ssi_port_remove),
+	.driver	= {
+		.name	= "omap_ssi_port",
+		.owner	= THIS_MODULE,
+		.of_match_table = omap_ssi_port_of_match,
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+module_platform_driver_probe(ssi_port_pdriver, ssi_port_probe);
+
+MODULE_ALIAS("platform:omap_ssi_port");
+MODULE_AUTHOR("Carlos Chinea <carlos.chinea@nokia.com>");
+MODULE_AUTHOR("Sebastian Reichel <sre@debian.org>");
+MODULE_DESCRIPTION("Synchronous Serial Interface Port Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hsi/controllers/omap_ssi_regs.h b/drivers/hsi/controllers/omap_ssi_regs.h
new file mode 100644
index 0000000..08f98dd
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi_regs.h
@@ -0,0 +1,171 @@
+/* Hardware definitions for SSI.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Carlos Chinea <carlos.chinea@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __OMAP_SSI_REGS_H__
+#define __OMAP_SSI_REGS_H__
+
+/*
+ * SSI SYS registers
+ */
+#define SSI_REVISION_REG    0
+#  define SSI_REV_MAJOR    0xf0
+#  define SSI_REV_MINOR    0xf
+#define SSI_SYSCONFIG_REG    0x10
+#  define SSI_AUTOIDLE    (1 << 0)
+#  define SSI_SOFTRESET    (1 << 1)
+#  define SSI_SIDLEMODE_FORCE  0
+#  define SSI_SIDLEMODE_NO    (1 << 3)
+#  define SSI_SIDLEMODE_SMART  (1 << 4)
+#  define SSI_SIDLEMODE_MASK  0x18
+#  define SSI_MIDLEMODE_FORCE  0
+#  define SSI_MIDLEMODE_NO    (1 << 12)
+#  define SSI_MIDLEMODE_SMART  (1 << 13)
+#  define SSI_MIDLEMODE_MASK  0x3000
+#define SSI_SYSSTATUS_REG    0x14
+#  define SSI_RESETDONE    1
+#define SSI_MPU_STATUS_REG(port, irq)  (0x808 + ((port) * 0x10) + ((irq) * 2))
+#define SSI_MPU_ENABLE_REG(port, irq)  (0x80c + ((port) * 0x10) + ((irq) * 8))
+#  define SSI_DATAACCEPT(channel)    (1 << (channel))
+#  define SSI_DATAAVAILABLE(channel)  (1 << ((channel) + 8))
+#  define SSI_DATAOVERRUN(channel)    (1 << ((channel) + 16))
+#  define SSI_ERROROCCURED      (1 << 24)
+#  define SSI_BREAKDETECTED    (1 << 25)
+#define SSI_GDD_MPU_IRQ_STATUS_REG  0x0800
+#define SSI_GDD_MPU_IRQ_ENABLE_REG  0x0804
+#  define SSI_GDD_LCH(channel)  (1 << (channel))
+#define SSI_WAKE_REG(port)    (0xc00 + ((port) * 0x10))
+#define SSI_CLEAR_WAKE_REG(port)  (0xc04 + ((port) * 0x10))
+#define SSI_SET_WAKE_REG(port)    (0xc08 + ((port) * 0x10))
+#  define SSI_WAKE(channel)  (1 << (channel))
+#  define SSI_WAKE_MASK    0xff
+
+/*
+ * SSI SST registers
+ */
+#define SSI_SST_ID_REG      0
+#define SSI_SST_MODE_REG    4
+#  define SSI_MODE_VAL_MASK  3
+#  define SSI_MODE_SLEEP    0
+#  define SSI_MODE_STREAM    1
+#  define SSI_MODE_FRAME    2
+#  define SSI_MODE_MULTIPOINTS  3
+#define SSI_SST_FRAMESIZE_REG    8
+#  define SSI_FRAMESIZE_DEFAULT  31
+#define SSI_SST_TXSTATE_REG    0xc
+#  define  SSI_TXSTATE_IDLE  0
+#define SSI_SST_BUFSTATE_REG    0x10
+#  define  SSI_FULL(channel)  (1 << (channel))
+#define SSI_SST_DIVISOR_REG    0x18
+#  define SSI_MAX_DIVISOR    127
+#define SSI_SST_BREAK_REG    0x20
+#define SSI_SST_CHANNELS_REG    0x24
+#  define SSI_CHANNELS_DEFAULT  4
+#define SSI_SST_ARBMODE_REG    0x28
+#  define SSI_ARBMODE_ROUNDROBIN  0
+#  define SSI_ARBMODE_PRIORITY  1
+#define SSI_SST_BUFFER_CH_REG(channel)  (0x80 + ((channel) * 4))
+#define SSI_SST_SWAPBUF_CH_REG(channel)  (0xc0 + ((channel) * 4))
+
+/*
+ * SSI SSR registers
+ */
+#define SSI_SSR_ID_REG      0
+#define SSI_SSR_MODE_REG    4
+#define SSI_SSR_FRAMESIZE_REG    8
+#define SSI_SSR_RXSTATE_REG    0xc
+#define SSI_SSR_BUFSTATE_REG    0x10
+#  define SSI_NOTEMPTY(channel)  (1 << (channel))
+#define SSI_SSR_BREAK_REG    0x1c
+#define SSI_SSR_ERROR_REG    0x20
+#define SSI_SSR_ERRORACK_REG    0x24
+#define SSI_SSR_OVERRUN_REG    0x2c
+#define SSI_SSR_OVERRUNACK_REG    0x30
+#define SSI_SSR_TIMEOUT_REG    0x34
+#  define SSI_TIMEOUT_DEFAULT  0
+#define SSI_SSR_CHANNELS_REG    0x28
+#define SSI_SSR_BUFFER_CH_REG(channel)  (0x80 + ((channel) * 4))
+#define SSI_SSR_SWAPBUF_CH_REG(channel)  (0xc0 + ((channel) * 4))
+
+/*
+ * SSI GDD registers
+ */
+#define SSI_GDD_HW_ID_REG    0
+#define SSI_GDD_PPORT_ID_REG    0x10
+#define SSI_GDD_MPORT_ID_REG    0x14
+#define SSI_GDD_PPORT_SR_REG    0x20
+#define SSI_GDD_MPORT_SR_REG    0x24
+#  define SSI_ACTIVE_LCH_NUM_MASK  0xff
+#define SSI_GDD_TEST_REG    0x40
+#  define SSI_TEST      1
+#define SSI_GDD_GCR_REG      0x100
+#  define  SSI_CLK_AUTOGATING_ON  (1 << 3)
+#  define  SSI_FREE    (1 << 2)
+#  define  SSI_SWITCH_OFF    (1 << 0)
+#define SSI_GDD_GRST_REG    0x200
+#  define SSI_SWRESET    1
+#define SSI_GDD_CSDP_REG(channel)  (0x800 + ((channel) * 0x40))
+#  define SSI_DST_BURST_EN_MASK  0xc000
+#  define SSI_DST_SINGLE_ACCESS0  0
+#  define SSI_DST_SINGLE_ACCESS  (1 << 14)
+#  define SSI_DST_BURST_4x32_BIT  (2 << 14)
+#  define SSI_DST_BURST_8x32_BIT  (3 << 14)
+#  define SSI_DST_MASK    0x1e00
+#  define SSI_DST_MEMORY_PORT  (8 << 9)
+#  define SSI_DST_PERIPHERAL_PORT  (9 << 9)
+#  define SSI_SRC_BURST_EN_MASK  0x180
+#  define SSI_SRC_SINGLE_ACCESS0  0
+#  define SSI_SRC_SINGLE_ACCESS  (1 << 7)
+#  define SSI_SRC_BURST_4x32_BIT  (2 << 7)
+#  define SSI_SRC_BURST_8x32_BIT  (3 << 7)
+#  define SSI_SRC_MASK    0x3c
+#  define SSI_SRC_MEMORY_PORT  (8 << 2)
+#  define SSI_SRC_PERIPHERAL_PORT  (9 << 2)
+#  define SSI_DATA_TYPE_MASK  3
+#  define SSI_DATA_TYPE_S32  2
+#define SSI_GDD_CCR_REG(channel)  (0x802 + ((channel) * 0x40))
+#  define SSI_DST_AMODE_MASK  (3 << 14)
+#  define SSI_DST_AMODE_CONST  0
+#  define SSI_DST_AMODE_POSTINC  (1 << 12)
+#  define SSI_SRC_AMODE_MASK  (3 << 12)
+#  define SSI_SRC_AMODE_CONST  0
+#  define SSI_SRC_AMODE_POSTINC  (1 << 12)
+#  define SSI_CCR_ENABLE    (1 << 7)
+#  define SSI_CCR_SYNC_MASK  0x1f
+#define SSI_GDD_CICR_REG(channel)  (0x804 + ((channel) * 0x40))
+#  define SSI_BLOCK_IE    (1 << 5)
+#  define SSI_HALF_IE    (1 << 2)
+#  define SSI_TOUT_IE    (1 << 0)
+#define SSI_GDD_CSR_REG(channel)  (0x806 + ((channel) * 0x40))
+#  define SSI_CSR_SYNC    (1 << 6)
+#  define SSI_CSR_BLOCK    (1 << 5)
+#  define SSI_CSR_HALF    (1 << 2)
+#  define SSI_CSR_TOUR    (1 << 0)
+#define SSI_GDD_CSSA_REG(channel)  (0x808 + ((channel) * 0x40))
+#define SSI_GDD_CDSA_REG(channel)  (0x80c + ((channel) * 0x40))
+#define SSI_GDD_CEN_REG(channel)  (0x810 + ((channel) * 0x40))
+#define SSI_GDD_CSAC_REG(channel)  (0x818 + ((channel) * 0x40))
+#define SSI_GDD_CDAC_REG(channel)  (0x81a + ((channel) * 0x40))
+#define SSI_GDD_CLNK_CTRL_REG(channel)  (0x828 + ((channel) * 0x40))
+#  define SSI_ENABLE_LNK    (1 << 15)
+#  define SSI_STOP_LNK    (1 << 14)
+#  define SSI_NEXT_CH_ID_MASK  0xf
+
+#endif /* __OMAP_SSI_REGS_H__ */
-- 
1.8.4.rc3

[RFCv3 7/7] ARM: dts: N900: Add SSI information

[Sebastian Reichel]

Add SSI device tree data for OMAP3 and Nokia N900.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++++
 arch/arm/boot/dts/omap3.dtsi     | 47 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 0582356..0fbb77e 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -186,6 +186,18 @@
 	power = <50>;
 };
 
+&ssi_port1 {
+	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+	ssi-char {
+		compatible = "ssi-char";
+	};
+};
+
+&ssi_port2 {
+	status = "disabled";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 7d95cda..9f60b82 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -532,5 +532,52 @@
 			num-eps = <16>;
 			ram-bits = <12>;
 		};
+
+		ssi: ssi-controller@48058000 {
+			compatible = "ti,omap3-ssi";
+			ti,hwmods = "ssi";
+
+			reg = <0x48058000 0x1000>,
+			      <0x48059000 0x1000>;
+			reg-names = "sys",
+				    "gdd";
+
+			interrupts = <71>;
+			interrupt-names = "gdd_mpu";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ssi_port1: ssi-port@0 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805a000 0x800>,
+				      <0x4805a800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupt-parent = <&intc>;
+				interrupts = <67>,
+					     <68>;
+				interrupt-names = "mpu_irq0",
+						  "mpu_irq1";
+			};
+
+			ssi_port2: ssi-port@1 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805b000 0x800>,
+				      <0x4805b800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupt-parent = <&intc>;
+				interrupts = <69>,
+					     <70>;
+				interrupt-names = "mpu_irq0",
+						  "mpu_irq1";
+			};
+		};
 	};
 };
-- 
1.8.4.rc3

Re: [RFCv3 0/7] OMAP SSI driver

[Tony Lindgren]

* Sebastian Reichel <sre@debian.org> [131006 13:36]:
> Hi,
> 
> Here is the third round of the OMAP SSI driver patches.

Thanks for updating these, they look good to me now:

Acked-by: Tony Lindgren <tony@atomide.com>

Re: [RFCv3 1/7] ARM: OMAP2+: hwmod-data: Add SSI information

[Paul Walmsley]

On Sun, 6 Oct 2013, Sebastian Reichel wrote:

> This patch adds Synchronous Serial Interface (SSI) hwmod support for
> OMAP34xx SoCs.
> 
> Signed-off-by: Sebastian Reichel <sre@debian.org>

Thanks, queued this one for v3.13.  You can drop it from any future 
reposts of this series.


- Paul

Re: [RFCv3 1/7] ARM: OMAP2+: hwmod-data: Add SSI information

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 401 bytes --]

On Wed, Oct 09, 2013 at 05:43:13AM +0000, Paul Walmsley wrote:
> On Sun, 6 Oct 2013, Sebastian Reichel wrote:
> 
> > This patch adds Synchronous Serial Interface (SSI) hwmod support for
> > OMAP34xx SoCs.
> > 
> > Signed-off-by: Sebastian Reichel <sre@debian.org>
> 
> Thanks, queued this one for v3.13.  You can drop it from any future 
> reposts of this series.

Thanks.

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFCv3 0/7] OMAP SSI driver

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1929 bytes --]

Hi,

On Tue, Oct 08, 2013 at 10:28:15AM -0700, Tony Lindgren wrote:
> * Sebastian Reichel <sre@debian.org> [131006 13:36]:
> > Here is the third round of the OMAP SSI driver patches.
> 
> Thanks for updating these, they look good to me now:
> 
> Acked-by: Tony Lindgren <tony@atomide.com>

Ok. I guess it's time to check how this gets included in the kernel.

The first patch has already been queued and the last patch could
probably go through Benoît once the DT people have reviewed the
updated patches. The other ones would normally go through the
hsi tree, but that one was maintained by Carlos Chinea and is 
now more or less orphaned.

My suggestion is:

1. I create another patch, which adds entries for hsi subsystem and
   ssi driver to MAINTAINERS.

   It would be nice to have some co-maintainers for the subsystem.
   Linus Walleij maybe? I think you created the launchpad blueprint [1]?
   Especially because I have no documentation/specification for HSI, which
   brings me to my next slightly off topic request.

   I would like to have access to SSI documentation and HSI specification.
   Can the guys from Texas Instruments please give me some pointers how I
   can get access to the NDA'd documentation? I couldn't find any hints
   on ti.com.

2. I create a patch adding Carlos Chinea to CREDITS

3. I create a git repository and put all of the patches in there, so
   that they can be pulled into linux-next.

4. I add a gpg/pgp signed tag with the key used to signed this mail.

Any issues with this or any other suggestions how to proceed? And if following this
- should I request an account on kernel.org to host the repository there,
or should I just upload it at a random place?

[0] https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/Next/Trees
[1] https://blueprints.launchpad.net/linux-linaro/+spec/hsi-subsystem-maint

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFCv3 0/7] OMAP SSI driver

[Tony Lindgren]

* Sebastian Reichel <sre@debian.org> [131010 10:30]:
> Hi,
> 
> On Tue, Oct 08, 2013 at 10:28:15AM -0700, Tony Lindgren wrote:
> > * Sebastian Reichel <sre@debian.org> [131006 13:36]:
> > > Here is the third round of the OMAP SSI driver patches.
> > 
> > Thanks for updating these, they look good to me now:
> > 
> > Acked-by: Tony Lindgren <tony@atomide.com>
> 
> Ok. I guess it's time to check how this gets included in the kernel.
> 
> The first patch has already been queued and the last patch could
> probably go through Benoît once the DT people have reviewed the
> updated patches. The other ones would normally go through the
> hsi tree, but that one was maintained by Carlos Chinea and is 
> now more or less orphaned.

Yes, I suggest you post the .dts changes completely seprately
so driver maintainers don't accidentally pick those up.
 
> My suggestion is:
> 
> 1. I create another patch, which adds entries for hsi subsystem and
>    ssi driver to MAINTAINERS.
> 
>    It would be nice to have some co-maintainers for the subsystem.
>    Linus Walleij maybe? I think you created the launchpad blueprint [1]?
>    Especially because I have no documentation/specification for HSI, which
>    brings me to my next slightly off topic request.
> 
>    I would like to have access to SSI documentation and HSI specification.
>    Can the guys from Texas Instruments please give me some pointers how I
>    can get access to the NDA'd documentation? I couldn't find any hints
>    on ti.com.
> 
> 2. I create a patch adding Carlos Chinea to CREDITS
> 
> 3. I create a git repository and put all of the patches in there, so
>    that they can be pulled into linux-next.
> 
> 4. I add a gpg/pgp signed tag with the key used to signed this mail.
> 
> Any issues with this or any other suggestions how to proceed? And if following this
> - should I request an account on kernel.org to host the repository there,
> or should I just upload it at a random place?

That all sounds good to me. It is a *good thing* to have a maintainer
for a driver subsystem, and if you're willing to pick it up, that's
the way to go.

Regards,

Tony
 
> [0] https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/Next/Trees
> [1] https://blueprints.launchpad.net/linux-linaro/+spec/hsi-subsystem-maint
> 
> -- Sebastian

Re: [RFCv3 0/7] OMAP SSI driver

[Aaro Koskinen]

Hi,

On Thu, Oct 10, 2013 at 07:21:30PM +0200, Sebastian Reichel wrote:
> Any issues with this or any other suggestions how to proceed?

Maybe you could provide some brief instructions/description of how this
was tested?

Thanks,

A.

Re: [RFCv3 0/7] OMAP SSI driver

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1502 bytes --]

On Thu, Oct 10, 2013 at 09:28:01PM +0300, Aaro Koskinen wrote:
> On Thu, Oct 10, 2013 at 07:21:30PM +0200, Sebastian Reichel wrote:
> > Any issues with this or any other suggestions how to proceed?
> 
> Maybe you could provide some brief instructions/description of how this
> was tested?

Sure. I used Carlos' original patch, which has been tested to be
working. Then I checked with some debug prints and the debugfs
support what the registers and resources should look like.
Next I updated the patch to use the new kernel frameworks and
made sure everything is behaves as before.

For actually using the modem of the Nokia N900 three more drivers
are needed in the mainline kernel in addtion to this one:

1. cmt

 This is a small driver handling the modem's reset line, which
 is connected via a gpio pin to the system.

2. ssi_protocol
 
 This is an hsi client driver, which actually talks with the modem
 and exports an phonet interface for userspace access. It makes
 use of the cmt driver.

 I plan on porting these to the new kernel frameworks next. If
 I'm not mistaken this should be enough to communicate with the
 modem.

3. cmt_speech

 This is an hsi client driver, which takes care of interchanging
 speech data with the modem. This one is needed for calling. I
 will have a look at it once the basic stuff is working.

P.S.: You can get a mainline kernel status matrix for the Nokia
      N900 on this page: http://elinux.org/N900

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFCv3 0/7] OMAP SSI driver

[Aaro Koskinen]

On Thu, Oct 10, 2013 at 10:02:36PM +0200, Sebastian Reichel wrote:
> P.S.: You can get a mainline kernel status matrix for the Nokia
>       N900 on this page: http://elinux.org/N900

Thanks for summary, and the above page looks very useful. I wonder
would it make sense to add also N9/N950 there (some functionality is
shared)? Also TWL4030 DT status could be updated, e.g. watchdog support
was done already last year with 8899b8d93ec64b7a8e54807a68a958e1206535e2.

A.

Re: [RFCv3 0/7] OMAP SSI driver

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1074 bytes --]

On Thu, Oct 10, 2013 at 11:19:14PM +0300, Aaro Koskinen wrote:
> On Thu, Oct 10, 2013 at 10:02:36PM +0200, Sebastian Reichel wrote:
> > P.S.: You can get a mainline kernel status matrix for the Nokia
> >       N900 on this page: http://elinux.org/N900
> 
> Thanks for summary,

You're welcome.

> and the above page looks very useful. I wonder would it make sense
> to add also N9/N950 there (some functionality is shared)?

mh maybe. I haven't looked @ N9/N950 so far, since I don't own them.
I would be interested in a N950, but I don't own one and it's almost
impossible to get one :(

Apart from that I'm not sure if it's a good idea to make the table
even more complex. Maybe just add a new page?

> Also TWL4030 DT status could be updated, e.g. watchdog support
> was done already last year with 8899b8d93ec64b7a8e54807a68a958e1206535e2.

Yes. I only recently added the DT column and have not yet checked
all the drivers. Probably it's also a good idea to split this
column into "driver supports DT" and "DT file supports it".

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFCv3 0/7] OMAP SSI driver

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 271 bytes --]

Hi,

On Sun, Oct 06, 2013 at 10:27:08PM +0200, Sebastian Reichel wrote:
> Here is the third round of the OMAP SSI driver patches.

ping!

I'm still waiting for feedback from DT maintainers.
Can you review the changes and Ack them or tell me how to proceed?

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFCv3 7/7] ARM: dts: N900: Add SSI information

[Benoit Cousson]

Hi Sebastian,

Thanks to Tony, I've just realized that I missed all your patches, that 
for some reason ended-up in my junk folder :-(

That being said, I cannot apply any of your DTS patches! What base 
branch are you using?

Could you repost all your pending DTS patches in one series rebased on 
top of my for_3.13/dts?

Thanks,
Benoit

On 06/10/2013 22:27, Sebastian Reichel wrote:
> Add SSI device tree data for OMAP3 and Nokia N900.
>
> Signed-off-by: Sebastian Reichel <sre@debian.org>
> ---
>   arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++++
>   arch/arm/boot/dts/omap3.dtsi     | 47 ++++++++++++++++++++++++++++++++++++++++
>   2 files changed, 59 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index 0582356..0fbb77e 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -186,6 +186,18 @@
>   	power = <50>;
>   };
>
> +&ssi_port1 {
> +	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
> +
> +	ssi-char {
> +		compatible = "ssi-char";
> +	};
> +};
> +
> +&ssi_port2 {
> +	status = "disabled";
> +};
> +
>   &uart1 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&uart1_pins>;
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 7d95cda..9f60b82 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -532,5 +532,52 @@
>   			num-eps = <16>;
>   			ram-bits = <12>;
>   		};
> +
> +		ssi: ssi-controller@48058000 {
> +			compatible = "ti,omap3-ssi";
> +			ti,hwmods = "ssi";
> +
> +			reg = <0x48058000 0x1000>,
> +			      <0x48059000 0x1000>;
> +			reg-names = "sys",
> +				    "gdd";
> +
> +			interrupts = <71>;
> +			interrupt-names = "gdd_mpu";
> +
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			ssi_port1: ssi-port@0 {
> +				compatible = "ti,omap3-ssi-port";
> +
> +				reg = <0x4805a000 0x800>,
> +				      <0x4805a800 0x800>;
> +				reg-names = "tx",
> +					    "rx";
> +
> +				interrupt-parent = <&intc>;
> +				interrupts = <67>,
> +					     <68>;
> +				interrupt-names = "mpu_irq0",
> +						  "mpu_irq1";
> +			};
> +
> +			ssi_port2: ssi-port@1 {
> +				compatible = "ti,omap3-ssi-port";
> +
> +				reg = <0x4805b000 0x800>,
> +				      <0x4805b800 0x800>;
> +				reg-names = "tx",
> +					    "rx";
> +
> +				interrupt-parent = <&intc>;
> +				interrupts = <69>,
> +					     <70>;
> +				interrupt-names = "mpu_irq0",
> +						  "mpu_irq1";
> +			};
> +		};
>   	};
>   };
>


-- 
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com

Re: [RFCv3 7/7] ARM: dts: N900: Add SSI information

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 744 bytes --]

Hi Benoit,

On Tue, Oct 22, 2013 at 02:48:45PM +0200, Benoit Cousson wrote:
> Thanks to Tony, I've just realized that I missed all your patches,
> that for some reason ended-up in my junk folder :-(

oh :( Can you check why they ended up in junk? I would like to
prevent more mails going there.

> That being said, I cannot apply any of your DTS patches! What base
> branch are you using?

Currently torvalds/master with pavel's n900 patch and some more
patches from me.

> Could you repost all your pending DTS patches in one series rebased
> on top of my for_3.13/dts?

Sure. DT maintainers haven't given feedback since the last patchset
[0]. Do you want to wait for feedback from them?

[0] https://lkml.org/lkml/2013/9/23/529

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFCv3 7/7] ARM: dts: N900: Add SSI information

[Benoit Cousson]

Hi Sebastian,

On 22/10/2013 16:44, Sebastian Reichel wrote:
> Hi Benoit,
>
> On Tue, Oct 22, 2013 at 02:48:45PM +0200, Benoit Cousson wrote:
>> Thanks to Tony, I've just realized that I missed all your patches,
>> that for some reason ended-up in my junk folder :-(
>
> oh :( Can you check why they ended up in junk? I would like to
> prevent more mails going there.
>
>> That being said, I cannot apply any of your DTS patches! What base
>> branch are you using?
>
> Currently torvalds/master with pavel's n900 patch and some more
> patches from me.

Mmm, looks like I missed these patches :-)

>
>> Could you repost all your pending DTS patches in one series rebased
>> on top of my for_3.13/dts?
>
> Sure. DT maintainers haven't given feedback since the last patchset
> [0]. Do you want to wait for feedback from them?

OK, maybe not the SSI series that is still RFC, but I guess all the 
others ones are fine to be merged.

Could you repost the whole N900 DTS patches (beside SSI) in one series 
rebased on top of mine?

Thanks,
Benoit

>
> [0] https://lkml.org/lkml/2013/9/23/529
>
> -- Sebastian
>


-- 
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com