* [PATCH 0/3] powerpc/dpaa: use the Cortina PHY driver
@ 2018-07-18 11:46 Camelia Groza
2018-07-18 11:46 ` [PATCH 1/3] powerpc/configs/dpaa: enable " Camelia Groza
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Camelia Groza @ 2018-07-18 11:46 UTC (permalink / raw)
To: robh+dt, mark.rutland, benh
Cc: paulus, mpe, devicetree, linuxppc-dev, linux-kernel, Camelia Groza
The Cortina PHY on T2080RDB and T4240RDB requires the use of the
dedicated Cortina PHY driver. This patch series enables it for
DPAA platforms and uses it on T4240RDB and T2080RDB.
Camelia Groza (3):
powerpc/configs/dpaa: enable the Cortina PHY driver
powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible
powerpc/dts/fsl: t2080rdb: use the Cortina PHY driver compatible
arch/powerpc/boot/dts/fsl/t2080rdb.dts | 4 ++--
arch/powerpc/boot/dts/fsl/t4240rdb.dts | 8 ++++----
arch/powerpc/configs/dpaa.config | 1 +
3 files changed, 7 insertions(+), 6 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/3] powerpc/configs/dpaa: enable the Cortina PHY driver
2018-07-18 11:46 [PATCH 0/3] powerpc/dpaa: use the Cortina PHY driver Camelia Groza
@ 2018-07-18 11:46 ` Camelia Groza
2018-07-18 11:46 ` [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible Camelia Groza
2018-07-18 11:46 ` [PATCH 3/3] powerpc/dts/fsl: t2080rdb: " Camelia Groza
2 siblings, 0 replies; 7+ messages in thread
From: Camelia Groza @ 2018-07-18 11:46 UTC (permalink / raw)
To: robh+dt, mark.rutland, benh
Cc: paulus, mpe, devicetree, linuxppc-dev, linux-kernel, Camelia Groza
Cortina PHYs are present on T4240RDB and T2080RDB. Enable the driver
by default.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
arch/powerpc/configs/dpaa.config | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/configs/dpaa.config b/arch/powerpc/configs/dpaa.config
index 2fe76f5..4ffacaf 100644
--- a/arch/powerpc/configs/dpaa.config
+++ b/arch/powerpc/configs/dpaa.config
@@ -2,3 +2,4 @@ CONFIG_FSL_DPAA=y
CONFIG_FSL_PAMU=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_DPAA_ETH=y
+CONFIG_CORTINA_PHY=y
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible
2018-07-18 11:46 [PATCH 0/3] powerpc/dpaa: use the Cortina PHY driver Camelia Groza
2018-07-18 11:46 ` [PATCH 1/3] powerpc/configs/dpaa: enable " Camelia Groza
@ 2018-07-18 11:46 ` Camelia Groza
2018-08-08 22:47 ` [2/3] " Scott Wood
2018-12-22 4:06 ` [PATCH 2/3] " Scott Wood
2018-07-18 11:46 ` [PATCH 3/3] powerpc/dts/fsl: t2080rdb: " Camelia Groza
2 siblings, 2 replies; 7+ messages in thread
From: Camelia Groza @ 2018-07-18 11:46 UTC (permalink / raw)
To: robh+dt, mark.rutland, benh
Cc: paulus, mpe, devicetree, linuxppc-dev, linux-kernel, Camelia Groza
The Cortina PHY requires the use of the dedicated Cortina PHY driver
instead of the generic one.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
arch/powerpc/boot/dts/fsl/t4240rdb.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
index 15eb0a3..a56a705 100644
--- a/arch/powerpc/boot/dts/fsl/t4240rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
@@ -267,22 +267,22 @@
mdio@fd000 {
xfiphy1: ethernet-phy@10 {
- compatible = "ethernet-phy-ieee802.3-c45";
+ compatible = "ethernet-phy-id13e5.1002";
reg = <0x10>;
};
xfiphy2: ethernet-phy@11 {
- compatible = "ethernet-phy-ieee802.3-c45";
+ compatible = "ethernet-phy-id13e5.1002";
reg = <0x11>;
};
xfiphy3: ethernet-phy@13 {
- compatible = "ethernet-phy-ieee802.3-c45";
+ compatible = "ethernet-phy-id13e5.1002";
reg = <0x13>;
};
xfiphy4: ethernet-phy@12 {
- compatible = "ethernet-phy-ieee802.3-c45";
+ compatible = "ethernet-phy-id13e5.1002";
reg = <0x12>;
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/3] powerpc/dts/fsl: t2080rdb: use the Cortina PHY driver compatible
2018-07-18 11:46 [PATCH 0/3] powerpc/dpaa: use the Cortina PHY driver Camelia Groza
2018-07-18 11:46 ` [PATCH 1/3] powerpc/configs/dpaa: enable " Camelia Groza
2018-07-18 11:46 ` [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible Camelia Groza
@ 2018-07-18 11:46 ` Camelia Groza
2 siblings, 0 replies; 7+ messages in thread
From: Camelia Groza @ 2018-07-18 11:46 UTC (permalink / raw)
To: robh+dt, mark.rutland, benh
Cc: paulus, mpe, devicetree, linuxppc-dev, linux-kernel, Camelia Groza
The Cortina PHY requires the use of the dedicated Cortina PHY driver
instead of the generic one.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
arch/powerpc/boot/dts/fsl/t2080rdb.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
index 836e4c9..55c0210 100644
--- a/arch/powerpc/boot/dts/fsl/t2080rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
@@ -97,12 +97,12 @@
mdio@fd000 {
xg_cs4315_phy1: ethernet-phy@c {
- compatible = "ethernet-phy-ieee802.3-c45";
+ compatible = "ethernet-phy-id13e5.1002";
reg = <0xc>;
};
xg_cs4315_phy2: ethernet-phy@d {
- compatible = "ethernet-phy-ieee802.3-c45";
+ compatible = "ethernet-phy-id13e5.1002";
reg = <0xd>;
};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible
2018-07-18 11:46 ` [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible Camelia Groza
@ 2018-08-08 22:47 ` Scott Wood
2018-12-22 4:06 ` [PATCH 2/3] " Scott Wood
1 sibling, 0 replies; 7+ messages in thread
From: Scott Wood @ 2018-08-08 22:47 UTC (permalink / raw)
To: Camelia Groza
Cc: robh+dt, mark.rutland, benh, devicetree, linux-kernel, paulus,
linuxppc-dev
On Wed, Jul 18, 2018 at 02:46:50PM +0300, Camelia Groza wrote:
> The Cortina PHY requires the use of the dedicated Cortina PHY driver
> instead of the generic one.
>
> Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
> ---
> arch/powerpc/boot/dts/fsl/t4240rdb.dts | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
Applied with the changelog updated to talk about hardware compatibility
("The Cortina PHY is not compatible with IEEE 802.3 clause 45") rather
than driver choice.
-Scott
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible
2018-07-18 11:46 ` [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible Camelia Groza
2018-08-08 22:47 ` [2/3] " Scott Wood
@ 2018-12-22 4:06 ` Scott Wood
2019-01-08 14:07 ` Camelia Alexandra Groza
1 sibling, 1 reply; 7+ messages in thread
From: Scott Wood @ 2018-12-22 4:06 UTC (permalink / raw)
To: Camelia Groza, robh+dt, mark.rutland, benh
Cc: devicetree, linux-kernel, paulus, linuxppc-dev
On Wed, 2018-07-18 at 14:46 +0300, Camelia Groza wrote:
> The Cortina PHY requires the use of the dedicated Cortina PHY driver
> instead of the generic one.
>
> Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
> ---
> arch/powerpc/boot/dts/fsl/t4240rdb.dts | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> index 15eb0a3..a56a705 100644
> --- a/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> +++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> @@ -267,22 +267,22 @@
>
> mdio@fd000 {
> xfiphy1: ethernet-phy@10 {
> - compatible = "ethernet-phy-ieee802.3-
> c45";
> + compatible = "ethernet-phy-
> id13e5.1002";
> reg = <0x10>;
> };
>
> xfiphy2: ethernet-phy@11 {
> - compatible = "ethernet-phy-ieee802.3-
> c45";
> + compatible = "ethernet-phy-
> id13e5.1002";
> reg = <0x11>;
> };
>
> xfiphy3: ethernet-phy@13 {
> - compatible = "ethernet-phy-ieee802.3-
> c45";
> + compatible = "ethernet-phy-
> id13e5.1002";
> reg = <0x13>;
> };
>
> xfiphy4: ethernet-phy@12 {
> - compatible = "ethernet-phy-ieee802.3-
> c45";
> + compatible = "ethernet-phy-
> id13e5.1002";
> reg = <0x12>;
> };
> };
I get crashes on boot when using a dtb with this change:
libphy: Fixed MDIO Bus: probed
iommu: Adding device ffe488000.port to group 61
libphy: Freescale XGMAC MDIO Bus: probed
mdio_bus ffe4e1000: Error while reading PHY0 reg at 3.3
iommu: Adding device ffe489000.port to group 63
libphy: Freescale XGMAC MDIO Bus: probed
mdio_bus ffe4e3000: Error while reading PHY0 reg at 3.3
iommu: Adding device ffe48a000.port to group 64
libphy: Freescale XGMAC MDIO Bus: probed
mdio_bus ffe4e5000: Error while reading PHY0 reg at 3.3
iommu: Adding device ffe48b000.port to group 65
libphy: Freescale XGMAC MDIO Bus: probed
mdio_bus ffe4e7000: Error while reading PHY0 reg at 3.3
iommu: Adding device ffe48c000.port to group 66
libphy: Freescale XGMAC MDIO Bus: probed
mdio_bus ffe4e9000: Error while reading PHY0 reg at 3.3
iommu: Adding device ffe48d000.port to group 67
libphy: Freescale XGMAC MDIO Bus: probed
mdio_bus ffe4eb000: Error while reading PHY0 reg at 3.3
iommu: Adding device ffe490000.port to group 68
libphy: Freescale XGMAC MDIO Bus: probed
iommu: Adding device ffe491000.port to group 69
libphy: Freescale XGMAC MDIO Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
BUG: Kernel NULL pointer dereference at 0x00000000
Faulting instruction address: 0xc000000000842c1c
Oops: Kernel access of bad area, sig: 11 [#1]
BE SMP NR_CPUS=24 CoreNet Generic
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc2+ #25
NIP: c000000000842c1c LR: c00000000063426c CTR: c0000000006341e8
REGS: c0000002ef1626b0 TRAP: 0300 Not tainted (4.20.0-rc2+)
MSR: 0000000080029000 <CE,EE,ME> CR: 24008482 XER: 20000000
DEAR: 0000000000000000 ESR: 0000000000000000 IRQMASK: 0
GPR00: c00000000054810c c0000002ef162940 c000000000f73a00 c0000002ef1629b4
GPR04: 0000000000000000 c0000002ed64d128 c0000002ed64d128 0000000000000000
GPR08: 0000000000000000 0000000000000000 c0000002ef158000 0000000000000001
GPR12: 0000000084008488 c0000000010f3000 c000000000002464 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000010
GPR20: c000000000cad9c0 c000000000c8c5e0 fffffffffffff000 c000000000c8c600
GPR24: c000000000a38db8 0000000000000000 0000000000000000 c0000002ec4ab748
GPR28: c0000000010e3b70 c000000000e81540 0000000000000000 c0000002ec4ab400
NIP [c000000000842c1c] .ethtool_convert_link_mode_to_legacy_u32+0x0/0x10
LR [c00000000063426c] .phy_probe+0x84/0x320
Call Trace:
[c0000002ef162940] [c0000002ec4ab410] 0xc0000002ec4ab410 (unreliable)
[c0000002ef1629f0] [c00000000054810c] .really_probe+0x268/0x3d0
[c0000002ef162a90] [c000000000545798] .bus_for_each_drv+0x7c/0xdc
[c0000002ef162b30] [c000000000547e58] .__device_attach+0x108/0x14c
[c0000002ef162bd0] [c000000000546db4] .bus_probe_device+0xcc/0xd8
[c0000002ef162c60] [c000000000543ffc] .device_add+0x4f8/0x6f8
[c0000002ef162d30] [c000000000633894] .phy_device_register+0x68/0xc8
[c0000002ef162db0] [c0000000007be7a0] .of_mdiobus_register_phy+0x150/0x1dc
[c0000002ef162e50] [c0000000007beea8] .of_mdiobus_register+0x14c/0x37c
[c0000002ef162f40] [c000000000646380] .xgmac_mdio_probe+0xf4/0x1cc
[c0000002ef163020] [c00000000054a598] .platform_drv_probe+0x5c/0xa8
[c0000002ef1630a0] [c00000000054810c] .really_probe+0x268/0x3d0
[c0000002ef163140] [c000000000545798] .bus_for_each_drv+0x7c/0xdc
[c0000002ef1631e0] [c000000000547e58] .__device_attach+0x108/0x14c
[c0000002ef163280] [c000000000546db4] .bus_probe_device+0xcc/0xd8
[c0000002ef163310] [c000000000543ffc] .device_add+0x4f8/0x6f8
[c0000002ef1633e0] [c0000000007b8020] .of_device_add+0x68/0x7c
[c0000002ef163450] [c0000000007b86ec]
.of_platform_device_create_pdata+0xc0/0x14
[c0000002ef1634f0] [c0000000007b8964] .of_platform_bus_create+0x174/0x26c
[c0000002ef1635e0] [c0000000007b8bd8] .of_platform_populate+0x58/0xe0
[c0000002ef163680] [c00000000065136c] .fman_probe+0x2b0/0x16a0
[c0000002ef163750] [c00000000054a598] .platform_drv_probe+0x5c/0xa8
[c0000002ef1637d0] [c00000000054810c] .really_probe+0x268/0x3d0
[c0000002ef163870] [c0000000005485f8] .__driver_attach+0x134/0x138
[c0000002ef163900] [c0000000005456a4] .bus_for_each_dev+0x7c/0xe0
[c0000002ef1639a0] [c0000000005478c4] .driver_attach+0x24/0x38
[c0000002ef163a10] [c000000000547178] .bus_add_driver+0x254/0x2d0
[c0000002ef163ab0] [c000000000548fa8] .driver_register+0x8c/0x178
[c0000002ef163b30] [c00000000054a528] .__platform_driver_register+0x48/0x5c
[c0000002ef163ba0] [c000000000d6a940] .fman_load+0x20/0x5c
ata1: No Device OR PHYRDY change,Hstatus = 0xa0000000
[c0000002ef163c20] [c0000000000021b4] .do_one_initcall+0x5c/0x224
ata1: SATA link down (SStatus 10 SControl 300)
ata2: No Device OR PHYRDY change,Hstatus = 0xa0000000
ata2: SATA link down (SStatus 10 SControl 300)
[c0000002ef163cf0] [c000000000d25160] .kernel_init_freeable+0x2d4/0x424
[c0000002ef163da0] [c000000000002480] .kernel_init+0x1c/0x128
[c0000002ef163e20] [c0000000000009f0] .ret_from_kernel_thread+0x58/0x68
Instruction dump:
64631000 78630020 4e800020 e9440030 e9030030 e9230038 7d0a5038 f9430030
e9440038 7d295038 f9230038 4e800020 <e9240000> 91230000 38600001 4e800020
---[ end trace fa8c923e42121019 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Rebooting in 180 seconds..
-Scott
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible
2018-12-22 4:06 ` [PATCH 2/3] " Scott Wood
@ 2019-01-08 14:07 ` Camelia Alexandra Groza
0 siblings, 0 replies; 7+ messages in thread
From: Camelia Alexandra Groza @ 2019-01-08 14:07 UTC (permalink / raw)
To: Scott Wood, robh+dt, mark.rutland, benh
Cc: devicetree, linux-kernel, paulus, linuxppc-dev
> -----Original Message-----
> From: Scott Wood <oss@buserror.net>
> Sent: Saturday, December 22, 2018 06:07
> To: Camelia Alexandra Groza <camelia.groza@nxp.com>;
> robh+dt@kernel.org; mark.rutland@arm.com; benh@kernel.crashing.org
> Cc: devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> paulus@samba.org; linuxppc-dev@lists.ozlabs.org
> Subject: Re: [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY
> driver compatible
>
> On Wed, 2018-07-18 at 14:46 +0300, Camelia Groza wrote:
> > The Cortina PHY requires the use of the dedicated Cortina PHY driver
> > instead of the generic one.
> >
> > Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
> > ---
> > arch/powerpc/boot/dts/fsl/t4240rdb.dts | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> > b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> > index 15eb0a3..a56a705 100644
> > --- a/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> > +++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
> > @@ -267,22 +267,22 @@
> >
> > mdio@fd000 {
> > xfiphy1: ethernet-phy@10 {
> > - compatible = "ethernet-phy-
> ieee802.3-
> > c45";
> > + compatible = "ethernet-phy-
> > id13e5.1002";
> > reg = <0x10>;
> > };
> >
> > xfiphy2: ethernet-phy@11 {
> > - compatible = "ethernet-phy-
> ieee802.3-
> > c45";
> > + compatible = "ethernet-phy-
> > id13e5.1002";
> > reg = <0x11>;
> > };
> >
> > xfiphy3: ethernet-phy@13 {
> > - compatible = "ethernet-phy-
> ieee802.3-
> > c45";
> > + compatible = "ethernet-phy-
> > id13e5.1002";
> > reg = <0x13>;
> > };
> >
> > xfiphy4: ethernet-phy@12 {
> > - compatible = "ethernet-phy-
> ieee802.3-
> > c45";
> > + compatible = "ethernet-phy-
> > id13e5.1002";
> > reg = <0x12>;
> > };
> > };
>
> I get crashes on boot when using a dtb with this change:
Hi
Sorry for the late replay. I was on vacation. I'm looking into it.
Regards,
Camelia
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-01-08 14:07 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-18 11:46 [PATCH 0/3] powerpc/dpaa: use the Cortina PHY driver Camelia Groza
2018-07-18 11:46 ` [PATCH 1/3] powerpc/configs/dpaa: enable " Camelia Groza
2018-07-18 11:46 ` [PATCH 2/3] powerpc/dts/fsl: t4240rdb: use the Cortina PHY driver compatible Camelia Groza
2018-08-08 22:47 ` [2/3] " Scott Wood
2018-12-22 4:06 ` [PATCH 2/3] " Scott Wood
2019-01-08 14:07 ` Camelia Alexandra Groza
2018-07-18 11:46 ` [PATCH 3/3] powerpc/dts/fsl: t2080rdb: " Camelia Groza
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).