* [PATCH v2 0/2] Add mmc driver for Sunplus SP7021 SOC @ 2022-01-05 5:20 Tony Huang 2022-01-05 5:20 ` [PATCH v2 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021 Tony Huang 2022-01-05 5:20 ` [PATCH v2 2/2] mmc: Add mmc driver " Tony Huang 0 siblings, 2 replies; 6+ messages in thread From: Tony Huang @ 2022-01-05 5:20 UTC (permalink / raw) To: ulf.hansson, robh+dt, linux-mmc, devicetree, linux-kernel, p.zabel Cc: tony.huang, wells.lu, Tony Huang This is a patch series for mmc driver for Sunplus SP7021 SOC. Sunplus SP7021 is an ARM Cortex A7 (4 cores) based SoC. It integrates many peripherals (ex: UART, I2C, SPI, SDIO, eMMC, USB, SD card and etc.) into a single chip. It is designed for industrial control. Refer to: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview https://tibbo.com/store/plus1.html Tony Huang (2): dt-binding: mmc: Add mmc yaml file for Sunplus SP7021 mmc: Add mmc driver for Sunplus SP7021 .../devicetree/bindings/mmc/sunplus-mmc.yaml | 60 + MAINTAINERS | 6 + drivers/mmc/host/sunplus_mmc.c | 1204 ++++++++++++++++++++ 3 files changed, 1270 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml create mode 100644 drivers/mmc/host/sunplus_mmc.c -- 2.7.4 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021 2022-01-05 5:20 [PATCH v2 0/2] Add mmc driver for Sunplus SP7021 SOC Tony Huang @ 2022-01-05 5:20 ` Tony Huang 2022-01-06 18:55 ` Rob Herring 2022-01-05 5:20 ` [PATCH v2 2/2] mmc: Add mmc driver " Tony Huang 1 sibling, 1 reply; 6+ messages in thread From: Tony Huang @ 2022-01-05 5:20 UTC (permalink / raw) To: ulf.hansson, robh+dt, linux-mmc, devicetree, linux-kernel, p.zabel Cc: tony.huang, wells.lu, Tony Huang Add mmc yaml file for Sunplus SP7021 Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com> --- Changes in v2: - Modify maintainers e-mail address. .../devicetree/bindings/mmc/sunplus-mmc.yaml | 60 ++++++++++++++++++++++ MAINTAINERS | 5 ++ 2 files changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml diff --git a/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml b/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml new file mode 100644 index 0000000..1c39af2 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Ltd. Co. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/sunplus-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: sunplus MMC controller + +allOf: + - $ref: "mmc-controller.yaml" + +maintainers: + - Tony Huang <tonyhuang.sunplus@gmail.com> + +properties: + compatible: + const: sunplus,sp7021-emmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + mmc0: mmc@9c003b00 { + compatible = "sunplus,sp7021-emmc"; + reg = <0x9c003b00 0x180>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc 0x4e>; + resets = <&rstc 0x3e>; + bus-width = <8>; + max-frequency = <52000000>; + non-removable; + disable-wp; + cap-mmc-highspeed; + mmc-ddr-3_3v; + no-sdio; + no-sd; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index fb18ce7..01ed57a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18242,6 +18242,11 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/dlink/sundance.c +SUNPLUS MMC DRIVER +M: Tony Huang <tonyhuang.sunplus@gmail.com> +S: Maintained +F: Documentation/devicetree/bindings/mmcc/sunplu-mmc.yaml + SUPERH M: Yoshinori Sato <ysato@users.sourceforge.jp> M: Rich Felker <dalias@libc.org> -- 2.7.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021 2022-01-05 5:20 ` [PATCH v2 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021 Tony Huang @ 2022-01-06 18:55 ` Rob Herring 0 siblings, 0 replies; 6+ messages in thread From: Rob Herring @ 2022-01-06 18:55 UTC (permalink / raw) To: Tony Huang Cc: Ulf Hansson, linux-mmc, linux-kernel, Philipp Zabel, Tony Huang 黃懷厚, Wells Lu 呂芳騰 On Tue, Jan 4, 2022 at 11:20 PM Tony Huang <tonyhuang.sunplus@gmail.com> wrote: > > Add mmc yaml file for Sunplus SP7021 There's a typo in the DT list address. Please resend so checks run. Looks fine otherwise. > > Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com> > --- > Changes in v2: > - Modify maintainers e-mail address. > > .../devicetree/bindings/mmc/sunplus-mmc.yaml | 60 ++++++++++++++++++++++ > MAINTAINERS | 5 ++ > 2 files changed, 65 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml > > diff --git a/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml b/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml > new file mode 100644 > index 0000000..1c39af2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml > @@ -0,0 +1,60 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) Sunplus Ltd. Co. 2021 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mmc/sunplus-mmc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: sunplus MMC controller > + > +allOf: > + - $ref: "mmc-controller.yaml" > + > +maintainers: > + - Tony Huang <tonyhuang.sunplus@gmail.com> > + > +properties: > + compatible: > + const: sunplus,sp7021-emmc > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + > + resets: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - resets > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + mmc0: mmc@9c003b00 { > + compatible = "sunplus,sp7021-emmc"; > + reg = <0x9c003b00 0x180>; > + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clkc 0x4e>; > + resets = <&rstc 0x3e>; > + bus-width = <8>; > + max-frequency = <52000000>; > + non-removable; > + disable-wp; > + cap-mmc-highspeed; > + mmc-ddr-3_3v; > + no-sdio; > + no-sd; > + }; > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index fb18ce7..01ed57a 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -18242,6 +18242,11 @@ L: netdev@vger.kernel.org > S: Maintained > F: drivers/net/ethernet/dlink/sundance.c > > +SUNPLUS MMC DRIVER > +M: Tony Huang <tonyhuang.sunplus@gmail.com> > +S: Maintained > +F: Documentation/devicetree/bindings/mmcc/sunplu-mmc.yaml > + > SUPERH > M: Yoshinori Sato <ysato@users.sourceforge.jp> > M: Rich Felker <dalias@libc.org> > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] mmc: Add mmc driver for Sunplus SP7021 2022-01-05 5:20 [PATCH v2 0/2] Add mmc driver for Sunplus SP7021 SOC Tony Huang 2022-01-05 5:20 ` [PATCH v2 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021 Tony Huang @ 2022-01-05 5:20 ` Tony Huang 2022-01-11 15:23 ` Ulf Hansson 1 sibling, 1 reply; 6+ messages in thread From: Tony Huang @ 2022-01-05 5:20 UTC (permalink / raw) To: ulf.hansson, robh+dt, linux-mmc, devicetree, linux-kernel, p.zabel Cc: tony.huang, wells.lu, Tony Huang Add mmc driver for Sunplus SP7021 Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com> --- Changes in v2: - Remove unused code. - Modify read/write register address. MAINTAINERS | 1 + drivers/mmc/host/sunplus_mmc.c | 1204 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 1205 insertions(+) create mode 100644 drivers/mmc/host/sunplus_mmc.c diff --git a/MAINTAINERS b/MAINTAINERS index 01ed57a..bf8c066 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18246,6 +18246,7 @@ SUNPLUS MMC DRIVER M: Tony Huang <tonyhuang.sunplus@gmail.com> S: Maintained F: Documentation/devicetree/bindings/mmcc/sunplu-mmc.yaml +F: drivers/mmc/host/sunplus_mmc.c SUPERH M: Yoshinori Sato <ysato@users.sourceforge.jp> diff --git a/drivers/mmc/host/sunplus_mmc.c b/drivers/mmc/host/sunplus_mmc.c new file mode 100644 index 0000000..78716cf --- /dev/null +++ b/drivers/mmc/host/sunplus_mmc.c @@ -0,0 +1,1204 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Sunplus Inc. + * Author: Tony Huang <tonyhuang.sunplus@gmail.com> + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/mmc/core.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> + +#define SPMMC_MIN_CLK 400000 +#define SPMMC_MAX_CLK 52000000 +#define SPMMC_MAX_BLK_COUNT 65536 +#define SPMMC_MAX_TUNABLE_DLY 7 + +#define SPMMC_CARD_MEDIATYPE_SRCDST_REG 0x0000 +#define SPMMC_MEDIA_NONE 0 +#define SPMMC_MEDIA_SD 6 +#define SPMMC_MEDIA_MS 7 + +#define SPMMC_SDRAM_SECTOR_0_SIZE_REG 0x0008 +#define SPMMC_DMA_BASE_ADDR_REG 0x000C +#define SPMMC_HW_DMA_CTRL_REG 0x0010 +#define SPMMC_MAX_DMA_MEMORY_SECTORS 8 + +#define SPMMC_SDRAM_SECTOR_1_ADDR_REG 0x0018 + +#define SPMMC_SD_INT_REG 0x0088 +#define SPMMC_SDINT_SDCMPEN BIT(0) +#define SPMMC_SDINT_SDCMP BIT(1) +#define SPMMC_SDINT_SDIOEN BIT(3) +#define SPMMC_SDINT_SDIO BIT(4) + +#define SPMMC_SD_PAGE_NUM_REG 0x008C +#define SPMMC_SD_CONFIG0_REG 0x0090 +#define SPMMC_MODE_SD 0 +#define SPMMC_MODE_EMMC 1 +#define SPMMC_MODE_SDIO 2 + +#define SPMMC_SDIO_CTRL_REG 0x0094 +#define SPMMC_SD_RST_REG 0x0098 +#define SPMMC_SD_CTRL_REG 0x009C + +#define SPMMC_SD_STATUS_REG 0x00A0 +#define SPMMC_SDSTATUS_DUMMY_READY BIT(0) +#define SPMMC_SDSTATUS_RSP_BUF_FULL BIT(1) +#define SPMMC_SDSTATUS_TX_DATA_BUF_EMPTY BIT(2) +#define SPMMC_SDSTATUS_RX_DATA_BUF_FULL BIT(3) +#define SPMMC_SDSTATUS_CMD_PIN_STATUS BIT(4) +#define SPMMC_SDSTATUS_DAT0_PIN_STATUS BIT(5) +#define SPMMC_SDSTATUS_RSP_TIMEOUT BIT(6) +#define SPMMC_SDSTATUS_CARD_CRC_CHECK_TIMEOUT BIT(7) +#define SPMMC_SDSTATUS_STB_TIMEOUT BIT(8) +#define SPMMC_SDSTATUS_RSP_CRC7_ERROR BIT(9) +#define SPMMC_SDSTATUS_CRC_TOKEN_CHECK_ERROR BIT(10) +#define SPMMC_SDSTATUS_RDATA_CRC16_ERROR BIT(11) +#define SPMMC_SDSTATUS_SUSPEND_STATE_READY BIT(12) +#define SPMMC_SDSTATUS_BUSY_CYCLE BIT(13) +#define SPMMC_SDSTATUS_DAT1_PIN_STATUS BIT(14) +#define SPMMC_SDSTATUS_SD_SENSE_STATUS BIT(15) +#define SPMMC_SDSTATUS_BOOT_ACK_TIMEOUT BIT(16) +#define SPMMC_SDSTATUS_BOOT_DATA_TIMEOUT BIT(17) +#define SPMMC_SDSTATUS_BOOT_ACK_ERROR BIT(18) + +#define SPMMC_SD_STATE_REG 0x00A4 +#define SPMMC_SDSTATE_ERROR BIT(13) +#define SPMMC_SDSTATE_FINISH BIT(14) + +#define SPMMC_SD_HW_STATE_REG 0x00A8 +#define SPMMC_SD_BLOCKSIZE_REG 0x00AC +#define SPMMC_SD_CONFIG1_REG 0x00B0 +#define SPMMC_SD_TIMING_CONFIG0_REG 0x00B4 +#define SPMMC_SD_PIODATATX_REG 0x00BC +#define SPMMC_SD_PIODATARX_REG 0x00C0 +#define SPMMC_SD_CMDBUF0_3_REG 0x00C4 +#define SPMMC_SD_CMDBUF4_REG 0x00C8 +#define SPMMC_SD_RSPBUF0_3_REG 0x00CC +#define SPMMC_SD_RSPBUF4_5_REG 0x00D0 + +struct spmmc_tuning_info { + int enable_tuning; + int need_tuning; +#define SPMMC_MAX_RETRIES (8 * 8) + int retried; /* how many times has been retried */ + u32 rd_crc_dly:3; + u32 rd_dat_dly:3; + u32 rd_rsp_dly:3; + u32 wr_cmd_dly:3; + u32 wr_dat_dly:3; + u32 clk_dly:3; +}; + +struct spmmc_host { + void __iomem *base; + struct clk *clk; + struct reset_control *rstc; + int mode; /* SD/SDIO/eMMC */ + spinlock_t lock; /* controller lock */ + struct mutex mrq_lock; + /* tasklet used to handle error then finish the request */ + struct tasklet_struct tsklet_finish_req; + struct mmc_host *mmc; + struct mmc_request *mrq; /* current mrq */ + + int irq; + int use_int; /* should raise irq when done? */ + int power_state; /* current power state: off/up/on */ + int ddr_enabled; + int signal_voltage; +#define SPMMC_DMA_MODE 0 +#define SPMMC_PIO_MODE 1 + int dmapio_mode; + /* for purpose of reducing context switch, only when transfer data that*/ + /* length is greater than `dma_int_threshold' should use interrupt */ + int dma_int_threshold; + struct sg_mapping_iter sg_miter; /* for pio mode to access sglist */ + int dma_use_int; /* should raise irq when dma done */ + struct spmmc_tuning_info tuning_info; +}; + +static const u8 tuning_blk_pattern_4bit[] = { + 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, + 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef, + 0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb, + 0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef, + 0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c, + 0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee, + 0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff, + 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde, +}; + +static const u8 tuning_blk_pattern_8bit[] = { + 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00, + 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc, + 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff, + 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff, + 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd, + 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb, + 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff, + 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff, + 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, + 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, + 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, + 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, + 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, + 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, + 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, + 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, +}; + +/* Produces a mask of set bits covering a range of a 32-bit value */ +static inline u32 bitfield_mask(u32 shift, u32 width) +{ + return ((1 << width) - 1) << shift; +} + +/* Extract the value of a bitfield found within a given register value */ +static inline u32 bitfield_extract(u32 reg_val, u32 shift, u32 width) +{ + return (reg_val & bitfield_mask(shift, width)) >> shift; +} + +/* Replace the value of a bitfield found within a given register value */ +static inline u32 bitfield_replace(u32 reg_val, u32 shift, u32 width, u32 val) +{ + u32 mask = bitfield_mask(shift, width); + + return (reg_val & ~mask) | (val << shift); +} + +/** + * wait for transaction done, return -1 if error. + */ +static inline int spmmc_wait_finish(struct spmmc_host *host) +{ + /* Wait for transaction finish */ + unsigned long timeout = jiffies + msecs_to_jiffies(5000); + + while (!time_after(jiffies, timeout)) { + if (readl(host->base + SPMMC_SD_STATE_REG) & SPMMC_SDSTATE_FINISH) + return 0; + if (readl(host->base + SPMMC_SD_STATE_REG) & SPMMC_SDSTATE_ERROR) + return -1; + } + return -1; +} + +static inline int spmmc_wait_sdstatus(struct spmmc_host *host, unsigned int status_bit) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(5000); + + while (!time_after(jiffies, timeout)) { + if (readl(host->base + SPMMC_SD_STATUS_REG) & status_bit) + return 0; + if (readl(host->base + SPMMC_SD_STATE_REG) & SPMMC_SDSTATE_ERROR) + return -1; + } + return -1; +} + +#define spmmc_wait_rspbuf_full(host) spmmc_wait_sdstatus(host, SPMMC_SDSTATUS_RSP_BUF_FULL) +#define spmmc_wait_rxbuf_full(host) spmmc_wait_sdstatus(host, SPMMC_SDSTATUS_RX_DATA_BUF_FULL) +#define spmmc_wait_txbuf_empty(host) spmmc_wait_sdstatus(host, SPMMC_SDSTATUS_TX_DATA_BUF_EMPTY) + +static void spmmc_get_rsp(struct spmmc_host *host, struct mmc_command *cmd) +{ + u32 value0_3, value4_5; + + if (unlikely(!(cmd->flags & MMC_RSP_PRESENT))) + return; + if (unlikely(cmd->flags & MMC_RSP_136)) { + if (spmmc_wait_rspbuf_full(host)) + return; + value0_3 = readl(host->base + SPMMC_SD_RSPBUF0_3_REG); + value4_5 = readl(host->base + SPMMC_SD_RSPBUF4_5_REG) & 0xffff; + cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8); + cmd->resp[1] = value4_5 << 24; + value0_3 = readl(host->base + SPMMC_SD_RSPBUF0_3_REG); + value4_5 = readl(host->base + SPMMC_SD_RSPBUF4_5_REG) & 0xffff; + cmd->resp[1] |= value0_3 >> 8; + cmd->resp[2] = value0_3 << 24; + cmd->resp[2] |= value4_5 << 8; + value0_3 = readl(host->base + SPMMC_SD_RSPBUF0_3_REG); + value4_5 = readl(host->base + SPMMC_SD_RSPBUF4_5_REG) & 0xffff; + cmd->resp[2] |= value0_3 >> 24; + cmd->resp[3] = value0_3 << 8; + cmd->resp[3] |= value4_5 >> 8; + } else { + if (spmmc_wait_rspbuf_full(host)) + return; + value0_3 = readl(host->base + SPMMC_SD_RSPBUF0_3_REG); + value4_5 = readl(host->base + SPMMC_SD_RSPBUF4_5_REG) & 0xffff; + cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8); + cmd->resp[1] = value4_5 << 24; + } + //return; +} + +static void spmmc_set_bus_clk(struct spmmc_host *host, int clk) +{ + unsigned int clkdiv; + int f_min = host->mmc->f_min; + int f_max = host->mmc->f_max; + u32 value = readl(host->base + SPMMC_SD_CONFIG0_REG); + + if (clk < f_min) + clk = f_min; + if (clk > f_max) + clk = f_max; + + clkdiv = (clk_get_rate(host->clk) + clk) / clk - 1; + if (clkdiv > 0xfff) + clkdiv = 0xfff; + + value = bitfield_replace(value, 20, 12, clkdiv); + writel(value, host->base + SPMMC_SD_CONFIG0_REG); + + /* In order to reduce the frequency of context switch, + * if it is high speed or upper, we do not use interrupt + * when send a command that without data transferring. + */ + if (clk > 25000000) + host->use_int = 0; + else + host->use_int = 1; +} + +static void spmmc_set_bus_timing(struct spmmc_host *host, unsigned int timing) +{ + u32 value = readl(host->base + SPMMC_SD_CONFIG1_REG); + int clkdiv = readl(host->base + SPMMC_SD_CONFIG0_REG) >> 20; + int delay = clkdiv / 2 < 7 ? clkdiv / 2 : 7; + int hs_en = 1; + char *timing_name; + + host->ddr_enabled = 0; + switch (timing) { + case MMC_TIMING_LEGACY: + hs_en = 0; + timing_name = "legacy"; + break; + case MMC_TIMING_MMC_HS: + timing_name = "mmc high-speed"; + break; + case MMC_TIMING_SD_HS: + timing_name = "sd high-speed"; + break; + case MMC_TIMING_UHS_SDR50: + timing_name = "sd uhs SDR50"; + break; + case MMC_TIMING_UHS_SDR104: + timing_name = "sd uhs SDR104"; + break; + case MMC_TIMING_UHS_DDR50: + host->ddr_enabled = 1; + timing_name = "sd uhs DDR50"; + break; + case MMC_TIMING_MMC_DDR52: + host->ddr_enabled = 1; + timing_name = "mmc DDR52"; + break; + case MMC_TIMING_MMC_HS200: + timing_name = "mmc HS200"; + break; + default: + timing_name = "invalid"; + hs_en = 0; + break; + } + + if (hs_en) { + value = bitfield_replace(value, 31, 1, 1); /* sd_high_speed_en */ + writel(value, host->base + SPMMC_SD_CONFIG1_REG); + value = readl(host->base + SPMMC_SD_TIMING_CONFIG0_REG); + value = bitfield_replace(value, 4, 3, delay); /* sd_wr_dat_dly_sel */ + value = bitfield_replace(value, 8, 3, delay); /* sd_wr_cmd_dly_sel */ + writel(value, host->base + SPMMC_SD_TIMING_CONFIG0_REG); + } else { + value = bitfield_replace(value, 31, 1, 0); + writel(value, host->base + SPMMC_SD_CONFIG1_REG); + } + if (host->ddr_enabled) { + value = readl(host->base + SPMMC_SD_CONFIG0_REG); + value = bitfield_replace(value, 1, 1, 1); /* sdddrmode */ + writel(value, host->base + SPMMC_SD_CONFIG0_REG); + } else { + value = readl(host->base + SPMMC_SD_CONFIG0_REG); + value = bitfield_replace(value, 1, 1, 0); + writel(value, host->base + SPMMC_SD_CONFIG0_REG); + } +} + +static void spmmc_set_bus_width(struct spmmc_host *host, int width) +{ + u32 value = readl(host->base + SPMMC_SD_CONFIG0_REG); + int bus_width; + + switch (width) { + case MMC_BUS_WIDTH_8: + value = bitfield_replace(value, 11, 1, 0); + value = bitfield_replace(value, 18, 1, 1); + bus_width = 8; + break; + case MMC_BUS_WIDTH_4: + value = bitfield_replace(value, 11, 1, 1); + value = bitfield_replace(value, 18, 1, 0); + bus_width = 4; + break; + default: + value = bitfield_replace(value, 11, 1, 0); + value = bitfield_replace(value, 18, 1, 0); + bus_width = 1; + break; + }; + writel(value, host->base + SPMMC_SD_CONFIG0_REG); +} + +/** + * select the working mode of controller: sd/sdio/emmc + */ +static void spmmc_select_mode(struct spmmc_host *host, int mode) +{ + u32 value = readl(host->base + SPMMC_SD_CONFIG0_REG); + + host->mode = mode; + /* set `sdmmcmode', as it will sample data at fall edge */ + /* of SD bus clock if `sdmmcmode' is not set when */ + /* `sd_high_speed_en' is not set, which is not compliant */ + /* with SD specification */ + value = bitfield_replace(value, 10, 1, 1); + switch (mode) { + case SPMMC_MODE_EMMC: + value = bitfield_replace(value, 9, 1, 0); + writel(value, host->base + SPMMC_SD_CONFIG0_REG); + break; + case SPMMC_MODE_SDIO: + value = bitfield_replace(value, 9, 1, 1); + writel(value, host->base + SPMMC_SD_CONFIG0_REG); + value = readl(host->base + SPMMC_SDIO_CTRL_REG); + value = bitfield_replace(value, 6, 1, 1); /* int_multi_trig */ + writel(value, host->base + SPMMC_SDIO_CTRL_REG); + break; + case SPMMC_MODE_SD: + default: + value = bitfield_replace(value, 9, 1, 0); + writel(value, host->base + SPMMC_SD_CONFIG0_REG); + break; + } +} + +static void spmmc_sw_reset(struct spmmc_host *host) +{ + u32 value; + + /* Must reset dma operation first, or it will*/ + /* be stuck on sd_state == 0x1c00 because of*/ + /* a controller software reset bug */ + value = readl(host->base + SPMMC_HW_DMA_CTRL_REG); + value = bitfield_replace(value, 10, 1, 1); + writel(value, host->base + SPMMC_HW_DMA_CTRL_REG); + value = bitfield_replace(value, 10, 1, 0); + writel(value, host->base + SPMMC_HW_DMA_CTRL_REG); + value = readl(host->base + SPMMC_HW_DMA_CTRL_REG); + value = bitfield_replace(value, 9, 1, 1); + writel(value, host->base + SPMMC_HW_DMA_CTRL_REG); + writel(0x7, host->base + SPMMC_SD_RST_REG); + while (readl(host->base + SPMMC_SD_HW_STATE_REG) & BIT(6)) + ; +} + +static void spmmc_prepare_cmd(struct spmmc_host *host, struct mmc_command *cmd) +{ + u32 value; + + /* add start bit, according to spec, command format */ + value = ((cmd->opcode | 0x40) << 24) | (cmd->arg >> 8); + writel(value, host->base + SPMMC_SD_CMDBUF0_3_REG); + writeb(cmd->arg & 0xff, host->base + SPMMC_SD_CMDBUF4_REG); + + /* disable interrupt if needed */ + value = readl(host->base + SPMMC_SD_INT_REG); + value = bitfield_replace(value, 2, 1, 1); /* sd_cmp_clr */ + if (likely(!host->use_int || cmd->flags & MMC_RSP_136)) + value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */ + else + value = bitfield_replace(value, 0, 1, 1); + writel(value, host->base + SPMMC_SD_INT_REG); + + value = readl(host->base + SPMMC_SD_CONFIG0_REG); + value = bitfield_replace(value, 4, 2, 0); /* sd_trans_mode */ + value = bitfield_replace(value, 7, 1, 1); /* sdcmddummy */ + if (likely(cmd->flags & MMC_RSP_PRESENT)) { + value = bitfield_replace(value, 6, 1, 1); /* sdautorsp */ + } else { + value = bitfield_replace(value, 6, 1, 0); + writel(value, host->base + SPMMC_SD_CONFIG0_REG); + return; + } + /* + * Currently, host is not capable of checking R2's CRC7, + * thus, enable crc7 check only for 48 bit response commands + */ + if (likely(cmd->flags & MMC_RSP_CRC && !(cmd->flags & MMC_RSP_136))) + value = bitfield_replace(value, 8, 1, 1); /* sdrspchk_en */ + else + value = bitfield_replace(value, 8, 1, 0); + + if (unlikely(cmd->flags & MMC_RSP_136)) + value = bitfield_replace(value, 15, 1, 1); /* sdrsptype */ + else + value = bitfield_replace(value, 15, 1, 0); + writel(value, host->base + SPMMC_SD_CONFIG0_REG); +} + +static void spmmc_prepare_data(struct spmmc_host *host, struct mmc_data *data) +{ + u32 value, srcdst; + //struct mmc_command *cmd = data->mrq->cmd; + + writel(data->blocks - 1, host->base + SPMMC_SD_PAGE_NUM_REG); + writel(data->blksz - 1, host->base + SPMMC_SD_BLOCKSIZE_REG); + value = readl(host->base + SPMMC_SD_CONFIG0_REG); + if (data->flags & MMC_DATA_READ) { + value = bitfield_replace(value, 4, 2, 2); /* sd_trans_mode */ + value = bitfield_replace(value, 6, 1, 0); /* sdautorsp */ + value = bitfield_replace(value, 7, 1, 0); /* sdcmddummy */ + srcdst = readl(host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); + srcdst = bitfield_replace(srcdst, 4, 7, 0x12); + writel(srcdst, host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); + } else { + value = bitfield_replace(value, 4, 2, 1); + srcdst = readl(host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); + srcdst = bitfield_replace(srcdst, 4, 7, 0x21); + writel(srcdst, host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); + } + value = bitfield_replace(value, 2, 1, 1); + if (likely(host->dmapio_mode == SPMMC_DMA_MODE)) { + struct scatterlist *sg; + dma_addr_t dma_addr; + unsigned int dma_size; + u32 *reg_addr; + int dma_direction = data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + int i, count = 1; + + count = dma_map_sg(host->mmc->parent, data->sg, data->sg_len, dma_direction); + if (unlikely(!count || count > SPMMC_MAX_DMA_MEMORY_SECTORS)) { + data->error = -EINVAL; + return; + } + for_each_sg(data->sg, sg, count, i) { + dma_addr = sg_dma_address(sg); + dma_size = sg_dma_len(sg) / 512 - 1; + if (i == 0) { + writel(dma_addr, host->base + SPMMC_DMA_BASE_ADDR_REG); + writel(dma_size, host->base + SPMMC_SDRAM_SECTOR_0_SIZE_REG); + } else { + reg_addr = host->base + SPMMC_SDRAM_SECTOR_1_ADDR_REG + (i - 1) * 2; + writel(dma_addr, reg_addr); + writel(dma_size, reg_addr + 1); + } + } + value = bitfield_replace(value, 0, 1, 0); /* sdpiomode */ + writel(value, host->base + SPMMC_SD_CONFIG0_REG); + /* enable interrupt if needed */ + if (!host->use_int && data->blksz * data->blocks > host->dma_int_threshold) { + host->dma_use_int = 1; + value = readl(host->base + SPMMC_SD_INT_REG); + value = bitfield_replace(value, 0, 1, 1); /* sdcmpen */ + writel(value, host->base + SPMMC_SD_INT_REG); + } + } else { + value = bitfield_replace(value, 0, 1, 1); + value = bitfield_replace(value, 14, 1, 1); /* rx4_en */ + writel(value, host->base + SPMMC_SD_CONFIG0_REG); + } +} + +static inline void spmmc_trigger_transaction(struct spmmc_host *host) +{ + u32 value = readl(host->base + SPMMC_SD_CTRL_REG); + + value = bitfield_replace(value, 0, 1, 1); /* trigger transaction */ + writel(value, host->base + SPMMC_SD_CTRL_REG); +} + +static void __send_stop_cmd(struct spmmc_host *host) +{ + struct mmc_command stop = {}; + u32 value; + + stop.opcode = MMC_STOP_TRANSMISSION; + stop.arg = 0; + stop.flags = MMC_RSP_R1B; + spmmc_prepare_cmd(host, &stop); + value = readl(host->base + SPMMC_SD_INT_REG); + value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */ + writel(value, host->base + SPMMC_SD_INT_REG); + spmmc_trigger_transaction(host); + spmmc_wait_finish(host); +} + +/** + * check if error occurred during transaction. + * @host - host + * @mrq - the mrq + * @return 0 if no error otherwise the error number. + */ +static int spmmc_check_error(struct spmmc_host *host, struct mmc_request *mrq) +{ + int ret = 0; + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + + u32 value = readl(host->base + SPMMC_SD_STATE_REG); + u32 crc_token = bitfield_extract(value, 4, 3); + + if (unlikely(value & SPMMC_SDSTATE_ERROR)) { + u32 timing_cfg0 = 0; + + value = readl(host->base + SPMMC_SD_STATUS_REG); + + if (host->tuning_info.enable_tuning) { + timing_cfg0 = readl(host->base + SPMMC_SD_TIMING_CONFIG0_REG); + host->tuning_info.rd_crc_dly = bitfield_extract(timing_cfg0, 20, 3); + host->tuning_info.rd_dat_dly = bitfield_extract(timing_cfg0, 16, 3); + host->tuning_info.rd_rsp_dly = bitfield_extract(timing_cfg0, 12, 3); + host->tuning_info.wr_cmd_dly = bitfield_extract(timing_cfg0, 8, 3); + host->tuning_info.wr_dat_dly = bitfield_extract(timing_cfg0, 4, 3); + } + + if (value & SPMMC_SDSTATUS_RSP_TIMEOUT) { + ret = -ETIMEDOUT; + host->tuning_info.wr_cmd_dly++; + } else if (value & SPMMC_SDSTATUS_RSP_CRC7_ERROR) { + ret = -EILSEQ; + host->tuning_info.rd_rsp_dly++; + } else if (data) { + if ((value & SPMMC_SDSTATUS_STB_TIMEOUT)) { + ret = -ETIMEDOUT; + host->tuning_info.rd_dat_dly++; + } else if (value & SPMMC_SDSTATUS_RDATA_CRC16_ERROR) { + ret = -EILSEQ; + host->tuning_info.rd_dat_dly++; + } else if (value & SPMMC_SDSTATUS_CARD_CRC_CHECK_TIMEOUT) { + ret = -ETIMEDOUT; + host->tuning_info.rd_crc_dly++; + } else if (value & SPMMC_SDSTATUS_CRC_TOKEN_CHECK_ERROR) { + ret = -EILSEQ; + if (crc_token == 0x5) + host->tuning_info.wr_dat_dly++; + else + host->tuning_info.rd_crc_dly++; + } + } + cmd->error = ret; + if (data) { + data->error = ret; + data->bytes_xfered = 0; + } + if (!host->tuning_info.need_tuning && host->tuning_info.enable_tuning) + cmd->retries = SPMMC_MAX_RETRIES; /* retry it */ + spmmc_sw_reset(host); + mdelay(5); + + if (host->tuning_info.enable_tuning) { + timing_cfg0 = bitfield_replace(timing_cfg0, 20, 3, + host->tuning_info.rd_crc_dly); + timing_cfg0 = bitfield_replace(timing_cfg0, 16, 3, + host->tuning_info.rd_dat_dly); + timing_cfg0 = bitfield_replace(timing_cfg0, 12, 3, + host->tuning_info.rd_rsp_dly); + timing_cfg0 = bitfield_replace(timing_cfg0, 8, 3, + host->tuning_info.wr_cmd_dly); + timing_cfg0 = bitfield_replace(timing_cfg0, 4, 3, + host->tuning_info.wr_dat_dly); + writel(timing_cfg0, host->base + SPMMC_SD_TIMING_CONFIG0_REG); + } + } else if (data) { + data->error = 0; + data->bytes_xfered = data->blocks * data->blksz; + } + host->tuning_info.need_tuning = ret; + /* controller will not send cmd 12 automatically if error occurred */ + if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) { + __send_stop_cmd(host); + spmmc_sw_reset(host); + } + return ret; +} + +/** + * the strategy is: + * 1. if several continuous delays are acceptable, we choose a middle one; + * 2. otherwise, we choose the first one. + */ +static inline int __find_best_delay(u8 candidate_dly) +{ + int f, w; + + if (!candidate_dly) + return 0; + f = ffs(candidate_dly) - 1; + w = hweight8(candidate_dly); + if (0xff == (bitfield_mask(f, w) & ~candidate_dly)) + return (f + w / 2); + else + return (f); +} + +static inline __maybe_unused void spmmc_txdummy(struct spmmc_host *host, int count) +{ + u32 value; + + count &= 0x1ff; + value = readl(host->base + SPMMC_SD_CONFIG1_REG); + value = bitfield_replace(value, 0, 9, count); + writel(value, host->base + SPMMC_SD_CONFIG1_REG); + value = readl(host->base + SPMMC_SD_CTRL_REG); + value = bitfield_replace(value, 1, 1, 1); /* trigger tx dummy */ + writel(value, host->base + SPMMC_SD_CTRL_REG); +} + +static void spmmc_xfer_data_pio(struct spmmc_host *host, struct mmc_data *data) +{ + u32 *buf; /* tx/rx 4 bytes one time in pio mode */ + int data_left = data->blocks * data->blksz; + int consumed, remain; + + struct sg_mapping_iter *sg_miter = &host->sg_miter; + unsigned int flags = 0; + + if (data->flags & MMC_DATA_WRITE) + flags |= SG_MITER_FROM_SG; + else + flags |= SG_MITER_TO_SG; + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); + while (data_left > 0) { + consumed = 0; + if (!sg_miter_next(sg_miter)) + break; + buf = sg_miter->addr; + remain = sg_miter->length; + do { + if (data->flags & MMC_DATA_WRITE) { + if (spmmc_wait_txbuf_empty(host)) + goto done; + writel(*buf, host->base + SPMMC_SD_PIODATATX_REG); + } else { + if (spmmc_wait_rxbuf_full(host)) + goto done; + *buf = readl(host->base + SPMMC_SD_PIODATARX_REG); + } + buf++; + consumed += 4; + remain -= 4; + } while (remain); + sg_miter->consumed = consumed; + data_left -= consumed; + } +done: + sg_miter_stop(sg_miter); +} + +static void spmmc_controller_init(struct spmmc_host *host) +{ + u32 value; + int ret = reset_control_assert(host->rstc); + + if (!ret) { + mdelay(1); + ret = reset_control_deassert(host->rstc); + } + + value = readl(host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); + value = bitfield_replace(value, 0, 3, SPMMC_MEDIA_SD); + writel(value, host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); + host->signal_voltage = MMC_SIGNAL_VOLTAGE_330; +} + +static void spmmc_set_power_mode(struct spmmc_host *host, struct mmc_ios *ios) +{ + if (host->power_state == ios->power_mode) + return; + + switch (ios->power_mode) { + /* power off->up->on */ + case MMC_POWER_ON: + spmmc_controller_init(host); + pm_runtime_get_sync(host->mmc->parent); + break; + case MMC_POWER_UP: + break; + case MMC_POWER_OFF: + pm_runtime_put(host->mmc->parent); + break; + } + host->power_state = ios->power_mode; +} + +/** + * 1. unmap scatterlist if needed; + * 2. get response & check error conditions; + * 3. unlock host->mrq_lock + * 4. notify mmc layer the request is done + */ +static void spmmc_finish_request(struct spmmc_host *host, struct mmc_request *mrq) +{ + struct mmc_command *cmd; + struct mmc_data *data; + + if (!mrq) + return; + + cmd = mrq->cmd; + data = mrq->data; + + if (data && SPMMC_DMA_MODE == host->dmapio_mode) { + int dma_direction = data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + + dma_unmap_sg(host->mmc->parent, data->sg, data->sg_len, dma_direction); + host->dma_use_int = 0; + } + spmmc_get_rsp(host, cmd); + spmmc_check_error(host, mrq); + host->mrq = NULL; + mutex_unlock(&host->mrq_lock); + mmc_request_done(host->mmc, mrq); +} + +/* Interrupt Service Routine */ +irqreturn_t spmmc_irq(int irq, void *dev_id) +{ + struct spmmc_host *host = dev_id; + u32 value = readl(host->base + SPMMC_SD_INT_REG); + + spin_lock(&host->lock); + if ((value & SPMMC_SDINT_SDCMP) && (value & SPMMC_SDINT_SDCMPEN)) { + value = bitfield_replace(value, 0, 1, 0); /* disable sdcmp */ + value = bitfield_replace(value, 2, 1, 1); /* sd_cmp_clr */ + writel(value, host->base + SPMMC_SD_INT_REG); + /* if error occurred, we my need send cmd 12 to stop data transaction,*/ + /* which is time consuming, so make use of tasklet to handle this.*/ + if (unlikely(readl(host->base + SPMMC_SD_STATE_REG) & SPMMC_SDSTATE_ERROR)) + tasklet_schedule(&host->tsklet_finish_req); + else + spmmc_finish_request(host, host->mrq); + } + if (value & SPMMC_SDINT_SDIO && + (value & SPMMC_SDINT_SDIOEN)) { + mmc_signal_sdio_irq(host->mmc); + } + spin_unlock(&host->lock); + return IRQ_HANDLED; +} + +static void spmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct spmmc_host *host = mmc_priv(mmc); + struct mmc_data *data; + struct mmc_command *cmd; + int ret; + + ret = mutex_lock_interruptible(&host->mrq_lock); + if (ret) + return; + + host->mrq = mrq; + data = mrq->data; + cmd = mrq->cmd; + + spmmc_prepare_cmd(host, cmd); + /* we need manually read response R2. */ + if (unlikely(cmd->flags & MMC_RSP_136)) { + spmmc_trigger_transaction(host); + spmmc_get_rsp(host, cmd); + spmmc_wait_finish(host); + spmmc_check_error(host, mrq); + host->mrq = NULL; + mutex_unlock(&host->mrq_lock); + mmc_request_done(host->mmc, mrq); + } else { + if (data) + spmmc_prepare_data(host, data); + + if (unlikely(host->dmapio_mode == SPMMC_PIO_MODE && data)) { + u32 value; + /* pio data transfer do not use interrupt */ + value = readl(host->base + SPMMC_SD_INT_REG); + value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */ + writel(value, host->base + SPMMC_SD_INT_REG); + spmmc_trigger_transaction(host); + spmmc_xfer_data_pio(host, data); + spmmc_wait_finish(host); + spmmc_finish_request(host, mrq); + } else { + if (!(host->use_int || host->dma_use_int)) { + spmmc_trigger_transaction(host); + spmmc_wait_finish(host); + spmmc_finish_request(host, mrq); + } else { + spmmc_trigger_transaction(host); + } + } + } +} + +static void spmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct spmmc_host *host = (struct spmmc_host *)mmc_priv(mmc); + + mutex_lock(&host->mrq_lock); + spmmc_set_power_mode(host, ios); + spmmc_set_bus_clk(host, ios->clock); + spmmc_set_bus_timing(host, ios->timing); + spmmc_set_bus_width(host, ios->bus_width); + /* ensure mode is correct, because we might have hw reset the controller */ + spmmc_select_mode(host, host->mode); + mutex_unlock(&host->mrq_lock); + //return; +} + +/** + * Return values for the get_cd callback should be: + * 0 for a absent card + * 1 for a present card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened + */ +int spmmc_get_cd(struct mmc_host *mmc) +{ + int ret = 0; + + if (mmc_can_gpio_cd(mmc)) + ret = mmc_gpio_get_cd(mmc); + + if (ret < 0) + ret = 0; + + return ret; +} + +static int spmmc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct spmmc_host *host = mmc_priv(mmc); + const u8 *blk_pattern; + u8 *blk_test; + int blksz; + u8 smpl_dly = 0, candidate_dly = 0; + u32 value; + + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) { + blk_pattern = tuning_blk_pattern_8bit; + blksz = sizeof(tuning_blk_pattern_8bit); + } else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) { + blk_pattern = tuning_blk_pattern_4bit; + blksz = sizeof(tuning_blk_pattern_4bit); + } else { + return -EINVAL; + } + + blk_test = kmalloc(blksz, GFP_KERNEL); + if (!blk_test) + return -ENOMEM; + + host->tuning_info.enable_tuning = 0; + do { + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_command stop = {0}; + struct mmc_data data = {0}; + struct scatterlist sg; + + cmd.opcode = opcode; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + stop.opcode = MMC_STOP_TRANSMISSION; + stop.arg = 0; + stop.flags = MMC_RSP_R1B | MMC_CMD_AC; + + data.blksz = blksz; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, blk_test, blksz); + mrq.cmd = &cmd; + mrq.stop = &stop; + mrq.data = &data; + host->mrq = &mrq; + + value = readl(host->base + SPMMC_SD_TIMING_CONFIG0_REG); + value = bitfield_replace(value, 12, 3, smpl_dly); /* sd_rd_rsp_dly_sel */ + value = bitfield_replace(value, 16, 3, smpl_dly); /* sd_rd_dat_dly_sel */ + value = bitfield_replace(value, 20, 3, smpl_dly); /* sd_rd_crc_dly_sel */ + writel(value, host->base + SPMMC_SD_TIMING_CONFIG0_REG); + + mmc_wait_for_req(mmc, &mrq); + if (!cmd.error && !data.error) { + if (!memcmp(blk_pattern, blk_test, blksz)) + candidate_dly |= (1 << smpl_dly); + } + } while (smpl_dly++ <= SPMMC_MAX_TUNABLE_DLY); + host->tuning_info.enable_tuning = 1; + + if (candidate_dly) { + smpl_dly = __find_best_delay(candidate_dly); + value = readl(host->base + SPMMC_SD_TIMING_CONFIG0_REG); + value = bitfield_replace(value, 12, 3, smpl_dly); /* sd_rd_rsp_dly_sel */ + value = bitfield_replace(value, 16, 3, smpl_dly); /* sd_rd_dat_dly_sel */ + value = bitfield_replace(value, 20, 3, smpl_dly); /* sd_rd_crc_dly_sel */ + writel(value, host->base + SPMMC_SD_TIMING_CONFIG0_REG); + return 0; + } + return -EIO; +} + +static void spmmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct spmmc_host *host = mmc_priv(mmc); + u32 value = readl(host->base + SPMMC_SD_INT_REG); + + value = bitfield_replace(value, 5, 1, 1); /* sdio_int_clr */ + if (enable) + value = bitfield_replace(value, 3, 1, 1); + else + value = bitfield_replace(value, 3, 1, 0); + writel(value, host->base + SPMMC_SD_INT_REG); +} + +static const struct mmc_host_ops spmmc_ops = { + .request = spmmc_request, + .set_ios = spmmc_set_ios, + .get_cd = spmmc_get_cd, + .execute_tuning = spmmc_execute_tuning, + .enable_sdio_irq = spmmc_enable_sdio_irq, +}; + +static void tsklet_func_finish_req(unsigned long data) +{ + struct spmmc_host *host = (struct spmmc_host *)data; + + spin_lock(&host->lock); + spmmc_finish_request(host, host->mrq); + spin_unlock(&host->lock); +} + +static int spmmc_drv_probe(struct platform_device *pdev) +{ + int ret = 0; + struct mmc_host *mmc; + struct resource *res; + struct spmmc_host *host; + unsigned int mode; + + mmc = mmc_alloc_host(sizeof(*host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto probe_free_host; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->power_state = MMC_POWER_OFF; + host->dma_int_threshold = 1024; + host->dmapio_mode = SPMMC_DMA_MODE; + + host->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(host->base)) + return PTR_ERR(host->base); + + host->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "Can not find clock source\n"); + ret = PTR_ERR(host->clk); + goto probe_free_host; + } + + host->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(host->rstc)) { + dev_err(&pdev->dev, "Can not find reset controller\n"); + ret = PTR_ERR(host->rstc); + goto probe_free_host; + } + + host->irq = platform_get_irq(pdev, 0); + if (host->irq <= 0) { + dev_err(&pdev->dev, "get sd irq resource fail\n"); + ret = -EINVAL; + goto probe_free_host; + } + if (devm_request_irq(&pdev->dev, host->irq, spmmc_irq, IRQF_SHARED, + dev_name(&pdev->dev), host)) { + dev_err(&pdev->dev, "Failed to request sd card interrupt.\n"); + ret = -ENOENT; + goto probe_free_host; + } + + ret = mmc_of_parse(mmc); + if (ret) + goto probe_free_host; + + ret = clk_prepare(host->clk); + if (ret) + goto probe_free_host; + ret = clk_enable(host->clk); + if (ret) + goto probe_clk_unprepare; + + spin_lock_init(&host->lock); + mutex_init(&host->mrq_lock); + tasklet_init(&host->tsklet_finish_req, tsklet_func_finish_req, (unsigned long)host); + mmc->ops = &spmmc_ops; + mmc->f_min = SPMMC_MIN_CLK; + if (mmc->f_max > SPMMC_MAX_CLK) + mmc->f_max = SPMMC_MAX_CLK; + + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->max_seg_size = SPMMC_MAX_BLK_COUNT * 512; + /* Host controller supports up to "SPMMC_MAX_DMA_MEMORY_SECTORS"*/ + /* a.k.a. max scattered memory segments per request*/ + mmc->max_segs = SPMMC_MAX_DMA_MEMORY_SECTORS; + mmc->max_req_size = SPMMC_MAX_BLK_COUNT * 512; + /* Limited by the max value of dma_size & data_length, set it to 512 bytes for now */ + mmc->max_blk_size = 512; + mmc->max_blk_count = SPMMC_MAX_BLK_COUNT; /* Limited by sd_page_num */ + + dev_set_drvdata(&pdev->dev, host); + spmmc_controller_init(host); + mode = (int)of_device_get_match_data(&pdev->dev); + spmmc_select_mode(host, mode); + mmc_add_host(mmc); + host->tuning_info.enable_tuning = 1; + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + return 0; + +probe_clk_unprepare: + dev_err(&pdev->dev, "unable to enable controller clock\n"); + clk_unprepare(host->clk); +probe_free_host: + if (mmc) + mmc_free_host(mmc); + + return ret; +} + +static int spmmc_drv_remove(struct platform_device *dev) +{ + struct spmmc_host *host = platform_get_drvdata(dev); + + mmc_remove_host(host->mmc); + clk_disable(host->clk); + clk_unprepare(host->clk); + pm_runtime_disable(&dev->dev); + platform_set_drvdata(dev, NULL); + mmc_free_host(host->mmc); + return 0; +} + +static int spmmc_drv_suspend(struct platform_device *dev, pm_message_t state) +{ + struct spmmc_host *host; + + host = platform_get_drvdata(dev); + mutex_lock(&host->mrq_lock); /* Make sure that no one is holding the controller */ + mutex_unlock(&host->mrq_lock); + clk_disable(host->clk); + return 0; +} + +static int spmmc_drv_resume(struct platform_device *dev) +{ + struct spmmc_host *host; + + host = platform_get_drvdata(dev); + return clk_enable(host->clk); +} + +#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP +static int spmmc_pm_suspend(struct device *dev) +{ + pm_runtime_force_suspend(dev); + return 0; +} + +static int spmmc_pm_resume(struct device *dev) +{ + pm_runtime_force_resume(dev); + return 0; +} +#endif /* ifdef CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM_RUNTIME +static int spmmc_pm_runtime_suspend(struct device *dev) +{ + struct spmmc_host *host; + + host = dev_get_drvdata(dev); + clk_disable(host->clk); + return 0; +} + +static int spmmc_pm_runtime_resume(struct device *dev) +{ + struct spmmc_host *host; + + host = dev_get_drvdata(dev); + return clk_enable(host->clk); +} +#endif /* ifdef CONFIG_PM_RUNTIME */ + +static const struct dev_pm_ops spmmc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(spmmc_pm_suspend, spmmc_pm_resume) +#ifdef CONFIG_PM_RUNTIME + SET_RUNTIME_PM_OPS(spmmc_pm_runtime_suspend, spmmc_pm_runtime_resume, NULL) +#endif +}; +#endif /* ifdef CONFIG_PM */ + +static const struct of_device_id spmmc_of_table[] = { + { + .compatible = "sunplus,sp7021-emmc", + .data = (void *)SPMMC_MODE_EMMC, + }, + {/* sentinel */} +}; +MODULE_DEVICE_TABLE(of, spmmc_of_table); + +static struct platform_driver spmmc_driver = { + .probe = spmmc_drv_probe, + .remove = spmmc_drv_remove, + .suspend = spmmc_drv_suspend, + .resume = spmmc_drv_resume, + .driver = { + .name = "spmmc", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &spmmc_pm_ops, +#endif + .of_match_table = spmmc_of_table, + }, +}; +module_platform_driver(spmmc_driver); + +MODULE_AUTHOR("Tony Huang <tonyhuang.sunplus@gmail.com>"); +MODULE_DESCRIPTION("Sunplus MMC controller driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] mmc: Add mmc driver for Sunplus SP7021 2022-01-05 5:20 ` [PATCH v2 2/2] mmc: Add mmc driver " Tony Huang @ 2022-01-11 15:23 ` Ulf Hansson 2022-01-12 10:18 ` Tony Huang 黃懷厚 0 siblings, 1 reply; 6+ messages in thread From: Ulf Hansson @ 2022-01-11 15:23 UTC (permalink / raw) To: Tony Huang, Li-hao Kuo, lh.kuo Cc: robh+dt, linux-mmc, devicetree, linux-kernel, p.zabel, tony.huang, wells.lu + Li-hau Kuo, On Wed, 5 Jan 2022 at 06:20, Tony Huang <tonyhuang.sunplus@gmail.com> wrote: > > Add mmc driver for Sunplus SP7021 > > Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com> There is another driver that has been posted for the eMMC/SD/SDIO controller for Sunplus SP7021 [1]. Without going into the details it looks like it's a very similar IP block - or at least it's just a slightly different version of it. Rather than using one separate driver per version of the IP block, I strongly suggest that we combine the drivers into one driver. I fully understand that we need to distinguish the variants in the driver, which should be done by using one compatible string per variant of the IP block. Moreover, we have existing common mmc DT bindings, thus allowing the block to be used for one of SD, SDIO or eMMC ("no-sd", "no-sdio" and "no-mmc"), which seem like it can be useful for this case. That said, before I start reviewing this, perhaps $subject patch is still a good starting point, then we can add support for the SD/SDIO part/variant on top to the same driver. Would that make sense or do you prefer another path forward? Kind regards Uffe [1] https://patchwork.kernel.org/project/linux-mmc/list/?series=601160 > --- > Changes in v2: > - Remove unused code. > - Modify read/write register address. > > MAINTAINERS | 1 + > drivers/mmc/host/sunplus_mmc.c | 1204 ++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 1205 insertions(+) > create mode 100644 drivers/mmc/host/sunplus_mmc.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 01ed57a..bf8c066 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -18246,6 +18246,7 @@ SUNPLUS MMC DRIVER > M: Tony Huang <tonyhuang.sunplus@gmail.com> > S: Maintained > F: Documentation/devicetree/bindings/mmcc/sunplu-mmc.yaml > +F: drivers/mmc/host/sunplus_mmc.c > > SUPERH > M: Yoshinori Sato <ysato@users.sourceforge.jp> > diff --git a/drivers/mmc/host/sunplus_mmc.c b/drivers/mmc/host/sunplus_mmc.c > new file mode 100644 > index 0000000..78716cf > --- /dev/null > +++ b/drivers/mmc/host/sunplus_mmc.c > @@ -0,0 +1,1204 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) Sunplus Inc. > + * Author: Tony Huang <tonyhuang.sunplus@gmail.com> > + */ > + > +#include <linux/bitops.h> > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/dma-mapping.h> > +#include <linux/interrupt.h> > +#include <linux/mmc/core.h> > +#include <linux/mmc/host.h> > +#include <linux/mmc/mmc.h> > +#include <linux/mmc/slot-gpio.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > +#include <linux/reset.h> > + > +#define SPMMC_MIN_CLK 400000 > +#define SPMMC_MAX_CLK 52000000 > +#define SPMMC_MAX_BLK_COUNT 65536 > +#define SPMMC_MAX_TUNABLE_DLY 7 > + > +#define SPMMC_CARD_MEDIATYPE_SRCDST_REG 0x0000 > +#define SPMMC_MEDIA_NONE 0 > +#define SPMMC_MEDIA_SD 6 > +#define SPMMC_MEDIA_MS 7 > + > +#define SPMMC_SDRAM_SECTOR_0_SIZE_REG 0x0008 > +#define SPMMC_DMA_BASE_ADDR_REG 0x000C > +#define SPMMC_HW_DMA_CTRL_REG 0x0010 > +#define SPMMC_MAX_DMA_MEMORY_SECTORS 8 > + > +#define SPMMC_SDRAM_SECTOR_1_ADDR_REG 0x0018 > + > +#define SPMMC_SD_INT_REG 0x0088 > +#define SPMMC_SDINT_SDCMPEN BIT(0) > +#define SPMMC_SDINT_SDCMP BIT(1) > +#define SPMMC_SDINT_SDIOEN BIT(3) > +#define SPMMC_SDINT_SDIO BIT(4) > + > +#define SPMMC_SD_PAGE_NUM_REG 0x008C > +#define SPMMC_SD_CONFIG0_REG 0x0090 > +#define SPMMC_MODE_SD 0 > +#define SPMMC_MODE_EMMC 1 > +#define SPMMC_MODE_SDIO 2 > + > +#define SPMMC_SDIO_CTRL_REG 0x0094 > +#define SPMMC_SD_RST_REG 0x0098 > +#define SPMMC_SD_CTRL_REG 0x009C > + > +#define SPMMC_SD_STATUS_REG 0x00A0 > +#define SPMMC_SDSTATUS_DUMMY_READY BIT(0) > +#define SPMMC_SDSTATUS_RSP_BUF_FULL BIT(1) > +#define SPMMC_SDSTATUS_TX_DATA_BUF_EMPTY BIT(2) > +#define SPMMC_SDSTATUS_RX_DATA_BUF_FULL BIT(3) > +#define SPMMC_SDSTATUS_CMD_PIN_STATUS BIT(4) > +#define SPMMC_SDSTATUS_DAT0_PIN_STATUS BIT(5) > +#define SPMMC_SDSTATUS_RSP_TIMEOUT BIT(6) > +#define SPMMC_SDSTATUS_CARD_CRC_CHECK_TIMEOUT BIT(7) > +#define SPMMC_SDSTATUS_STB_TIMEOUT BIT(8) > +#define SPMMC_SDSTATUS_RSP_CRC7_ERROR BIT(9) > +#define SPMMC_SDSTATUS_CRC_TOKEN_CHECK_ERROR BIT(10) > +#define SPMMC_SDSTATUS_RDATA_CRC16_ERROR BIT(11) > +#define SPMMC_SDSTATUS_SUSPEND_STATE_READY BIT(12) > +#define SPMMC_SDSTATUS_BUSY_CYCLE BIT(13) > +#define SPMMC_SDSTATUS_DAT1_PIN_STATUS BIT(14) > +#define SPMMC_SDSTATUS_SD_SENSE_STATUS BIT(15) > +#define SPMMC_SDSTATUS_BOOT_ACK_TIMEOUT BIT(16) > +#define SPMMC_SDSTATUS_BOOT_DATA_TIMEOUT BIT(17) > +#define SPMMC_SDSTATUS_BOOT_ACK_ERROR BIT(18) > + > +#define SPMMC_SD_STATE_REG 0x00A4 > +#define SPMMC_SDSTATE_ERROR BIT(13) > +#define SPMMC_SDSTATE_FINISH BIT(14) > + > +#define SPMMC_SD_HW_STATE_REG 0x00A8 > +#define SPMMC_SD_BLOCKSIZE_REG 0x00AC > +#define SPMMC_SD_CONFIG1_REG 0x00B0 > +#define SPMMC_SD_TIMING_CONFIG0_REG 0x00B4 > +#define SPMMC_SD_PIODATATX_REG 0x00BC > +#define SPMMC_SD_PIODATARX_REG 0x00C0 > +#define SPMMC_SD_CMDBUF0_3_REG 0x00C4 > +#define SPMMC_SD_CMDBUF4_REG 0x00C8 > +#define SPMMC_SD_RSPBUF0_3_REG 0x00CC > +#define SPMMC_SD_RSPBUF4_5_REG 0x00D0 > + > +struct spmmc_tuning_info { > + int enable_tuning; > + int need_tuning; > +#define SPMMC_MAX_RETRIES (8 * 8) > + int retried; /* how many times has been retried */ > + u32 rd_crc_dly:3; > + u32 rd_dat_dly:3; > + u32 rd_rsp_dly:3; > + u32 wr_cmd_dly:3; > + u32 wr_dat_dly:3; > + u32 clk_dly:3; > +}; > + > +struct spmmc_host { > + void __iomem *base; > + struct clk *clk; > + struct reset_control *rstc; > + int mode; /* SD/SDIO/eMMC */ > + spinlock_t lock; /* controller lock */ > + struct mutex mrq_lock; > + /* tasklet used to handle error then finish the request */ > + struct tasklet_struct tsklet_finish_req; > + struct mmc_host *mmc; > + struct mmc_request *mrq; /* current mrq */ > + > + int irq; > + int use_int; /* should raise irq when done? */ > + int power_state; /* current power state: off/up/on */ > + int ddr_enabled; > + int signal_voltage; > +#define SPMMC_DMA_MODE 0 > +#define SPMMC_PIO_MODE 1 > + int dmapio_mode; > + /* for purpose of reducing context switch, only when transfer data that*/ > + /* length is greater than `dma_int_threshold' should use interrupt */ > + int dma_int_threshold; > + struct sg_mapping_iter sg_miter; /* for pio mode to access sglist */ > + int dma_use_int; /* should raise irq when dma done */ > + struct spmmc_tuning_info tuning_info; > +}; > + > +static const u8 tuning_blk_pattern_4bit[] = { > + 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, > + 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef, > + 0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb, > + 0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef, > + 0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c, > + 0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee, > + 0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff, > + 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde, > +}; > + > +static const u8 tuning_blk_pattern_8bit[] = { > + 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00, > + 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc, > + 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff, > + 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff, > + 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd, > + 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb, > + 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff, > + 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff, > + 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, > + 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, > + 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, > + 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, > + 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, > + 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, > + 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, > + 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, > +}; > + > +/* Produces a mask of set bits covering a range of a 32-bit value */ > +static inline u32 bitfield_mask(u32 shift, u32 width) > +{ > + return ((1 << width) - 1) << shift; > +} > + > +/* Extract the value of a bitfield found within a given register value */ > +static inline u32 bitfield_extract(u32 reg_val, u32 shift, u32 width) > +{ > + return (reg_val & bitfield_mask(shift, width)) >> shift; > +} > + > +/* Replace the value of a bitfield found within a given register value */ > +static inline u32 bitfield_replace(u32 reg_val, u32 shift, u32 width, u32 val) > +{ > + u32 mask = bitfield_mask(shift, width); > + > + return (reg_val & ~mask) | (val << shift); > +} > + > +/** > + * wait for transaction done, return -1 if error. > + */ > +static inline int spmmc_wait_finish(struct spmmc_host *host) > +{ > + /* Wait for transaction finish */ > + unsigned long timeout = jiffies + msecs_to_jiffies(5000); > + > + while (!time_after(jiffies, timeout)) { > + if (readl(host->base + SPMMC_SD_STATE_REG) & SPMMC_SDSTATE_FINISH) > + return 0; > + if (readl(host->base + SPMMC_SD_STATE_REG) & SPMMC_SDSTATE_ERROR) > + return -1; > + } > + return -1; > +} > + > +static inline int spmmc_wait_sdstatus(struct spmmc_host *host, unsigned int status_bit) > +{ > + unsigned long timeout = jiffies + msecs_to_jiffies(5000); > + > + while (!time_after(jiffies, timeout)) { > + if (readl(host->base + SPMMC_SD_STATUS_REG) & status_bit) > + return 0; > + if (readl(host->base + SPMMC_SD_STATE_REG) & SPMMC_SDSTATE_ERROR) > + return -1; > + } > + return -1; > +} > + > +#define spmmc_wait_rspbuf_full(host) spmmc_wait_sdstatus(host, SPMMC_SDSTATUS_RSP_BUF_FULL) > +#define spmmc_wait_rxbuf_full(host) spmmc_wait_sdstatus(host, SPMMC_SDSTATUS_RX_DATA_BUF_FULL) > +#define spmmc_wait_txbuf_empty(host) spmmc_wait_sdstatus(host, SPMMC_SDSTATUS_TX_DATA_BUF_EMPTY) > + > +static void spmmc_get_rsp(struct spmmc_host *host, struct mmc_command *cmd) > +{ > + u32 value0_3, value4_5; > + > + if (unlikely(!(cmd->flags & MMC_RSP_PRESENT))) > + return; > + if (unlikely(cmd->flags & MMC_RSP_136)) { > + if (spmmc_wait_rspbuf_full(host)) > + return; > + value0_3 = readl(host->base + SPMMC_SD_RSPBUF0_3_REG); > + value4_5 = readl(host->base + SPMMC_SD_RSPBUF4_5_REG) & 0xffff; > + cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8); > + cmd->resp[1] = value4_5 << 24; > + value0_3 = readl(host->base + SPMMC_SD_RSPBUF0_3_REG); > + value4_5 = readl(host->base + SPMMC_SD_RSPBUF4_5_REG) & 0xffff; > + cmd->resp[1] |= value0_3 >> 8; > + cmd->resp[2] = value0_3 << 24; > + cmd->resp[2] |= value4_5 << 8; > + value0_3 = readl(host->base + SPMMC_SD_RSPBUF0_3_REG); > + value4_5 = readl(host->base + SPMMC_SD_RSPBUF4_5_REG) & 0xffff; > + cmd->resp[2] |= value0_3 >> 24; > + cmd->resp[3] = value0_3 << 8; > + cmd->resp[3] |= value4_5 >> 8; > + } else { > + if (spmmc_wait_rspbuf_full(host)) > + return; > + value0_3 = readl(host->base + SPMMC_SD_RSPBUF0_3_REG); > + value4_5 = readl(host->base + SPMMC_SD_RSPBUF4_5_REG) & 0xffff; > + cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8); > + cmd->resp[1] = value4_5 << 24; > + } > + //return; > +} > + > +static void spmmc_set_bus_clk(struct spmmc_host *host, int clk) > +{ > + unsigned int clkdiv; > + int f_min = host->mmc->f_min; > + int f_max = host->mmc->f_max; > + u32 value = readl(host->base + SPMMC_SD_CONFIG0_REG); > + > + if (clk < f_min) > + clk = f_min; > + if (clk > f_max) > + clk = f_max; > + > + clkdiv = (clk_get_rate(host->clk) + clk) / clk - 1; > + if (clkdiv > 0xfff) > + clkdiv = 0xfff; > + > + value = bitfield_replace(value, 20, 12, clkdiv); > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > + > + /* In order to reduce the frequency of context switch, > + * if it is high speed or upper, we do not use interrupt > + * when send a command that without data transferring. > + */ > + if (clk > 25000000) > + host->use_int = 0; > + else > + host->use_int = 1; > +} > + > +static void spmmc_set_bus_timing(struct spmmc_host *host, unsigned int timing) > +{ > + u32 value = readl(host->base + SPMMC_SD_CONFIG1_REG); > + int clkdiv = readl(host->base + SPMMC_SD_CONFIG0_REG) >> 20; > + int delay = clkdiv / 2 < 7 ? clkdiv / 2 : 7; > + int hs_en = 1; > + char *timing_name; > + > + host->ddr_enabled = 0; > + switch (timing) { > + case MMC_TIMING_LEGACY: > + hs_en = 0; > + timing_name = "legacy"; > + break; > + case MMC_TIMING_MMC_HS: > + timing_name = "mmc high-speed"; > + break; > + case MMC_TIMING_SD_HS: > + timing_name = "sd high-speed"; > + break; > + case MMC_TIMING_UHS_SDR50: > + timing_name = "sd uhs SDR50"; > + break; > + case MMC_TIMING_UHS_SDR104: > + timing_name = "sd uhs SDR104"; > + break; > + case MMC_TIMING_UHS_DDR50: > + host->ddr_enabled = 1; > + timing_name = "sd uhs DDR50"; > + break; > + case MMC_TIMING_MMC_DDR52: > + host->ddr_enabled = 1; > + timing_name = "mmc DDR52"; > + break; > + case MMC_TIMING_MMC_HS200: > + timing_name = "mmc HS200"; > + break; > + default: > + timing_name = "invalid"; > + hs_en = 0; > + break; > + } > + > + if (hs_en) { > + value = bitfield_replace(value, 31, 1, 1); /* sd_high_speed_en */ > + writel(value, host->base + SPMMC_SD_CONFIG1_REG); > + value = readl(host->base + SPMMC_SD_TIMING_CONFIG0_REG); > + value = bitfield_replace(value, 4, 3, delay); /* sd_wr_dat_dly_sel */ > + value = bitfield_replace(value, 8, 3, delay); /* sd_wr_cmd_dly_sel */ > + writel(value, host->base + SPMMC_SD_TIMING_CONFIG0_REG); > + } else { > + value = bitfield_replace(value, 31, 1, 0); > + writel(value, host->base + SPMMC_SD_CONFIG1_REG); > + } > + if (host->ddr_enabled) { > + value = readl(host->base + SPMMC_SD_CONFIG0_REG); > + value = bitfield_replace(value, 1, 1, 1); /* sdddrmode */ > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > + } else { > + value = readl(host->base + SPMMC_SD_CONFIG0_REG); > + value = bitfield_replace(value, 1, 1, 0); > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > + } > +} > + > +static void spmmc_set_bus_width(struct spmmc_host *host, int width) > +{ > + u32 value = readl(host->base + SPMMC_SD_CONFIG0_REG); > + int bus_width; > + > + switch (width) { > + case MMC_BUS_WIDTH_8: > + value = bitfield_replace(value, 11, 1, 0); > + value = bitfield_replace(value, 18, 1, 1); > + bus_width = 8; > + break; > + case MMC_BUS_WIDTH_4: > + value = bitfield_replace(value, 11, 1, 1); > + value = bitfield_replace(value, 18, 1, 0); > + bus_width = 4; > + break; > + default: > + value = bitfield_replace(value, 11, 1, 0); > + value = bitfield_replace(value, 18, 1, 0); > + bus_width = 1; > + break; > + }; > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > +} > + > +/** > + * select the working mode of controller: sd/sdio/emmc > + */ > +static void spmmc_select_mode(struct spmmc_host *host, int mode) > +{ > + u32 value = readl(host->base + SPMMC_SD_CONFIG0_REG); > + > + host->mode = mode; > + /* set `sdmmcmode', as it will sample data at fall edge */ > + /* of SD bus clock if `sdmmcmode' is not set when */ > + /* `sd_high_speed_en' is not set, which is not compliant */ > + /* with SD specification */ > + value = bitfield_replace(value, 10, 1, 1); > + switch (mode) { > + case SPMMC_MODE_EMMC: > + value = bitfield_replace(value, 9, 1, 0); > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > + break; > + case SPMMC_MODE_SDIO: > + value = bitfield_replace(value, 9, 1, 1); > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > + value = readl(host->base + SPMMC_SDIO_CTRL_REG); > + value = bitfield_replace(value, 6, 1, 1); /* int_multi_trig */ > + writel(value, host->base + SPMMC_SDIO_CTRL_REG); > + break; > + case SPMMC_MODE_SD: > + default: > + value = bitfield_replace(value, 9, 1, 0); > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > + break; > + } > +} > + > +static void spmmc_sw_reset(struct spmmc_host *host) > +{ > + u32 value; > + > + /* Must reset dma operation first, or it will*/ > + /* be stuck on sd_state == 0x1c00 because of*/ > + /* a controller software reset bug */ > + value = readl(host->base + SPMMC_HW_DMA_CTRL_REG); > + value = bitfield_replace(value, 10, 1, 1); > + writel(value, host->base + SPMMC_HW_DMA_CTRL_REG); > + value = bitfield_replace(value, 10, 1, 0); > + writel(value, host->base + SPMMC_HW_DMA_CTRL_REG); > + value = readl(host->base + SPMMC_HW_DMA_CTRL_REG); > + value = bitfield_replace(value, 9, 1, 1); > + writel(value, host->base + SPMMC_HW_DMA_CTRL_REG); > + writel(0x7, host->base + SPMMC_SD_RST_REG); > + while (readl(host->base + SPMMC_SD_HW_STATE_REG) & BIT(6)) > + ; > +} > + > +static void spmmc_prepare_cmd(struct spmmc_host *host, struct mmc_command *cmd) > +{ > + u32 value; > + > + /* add start bit, according to spec, command format */ > + value = ((cmd->opcode | 0x40) << 24) | (cmd->arg >> 8); > + writel(value, host->base + SPMMC_SD_CMDBUF0_3_REG); > + writeb(cmd->arg & 0xff, host->base + SPMMC_SD_CMDBUF4_REG); > + > + /* disable interrupt if needed */ > + value = readl(host->base + SPMMC_SD_INT_REG); > + value = bitfield_replace(value, 2, 1, 1); /* sd_cmp_clr */ > + if (likely(!host->use_int || cmd->flags & MMC_RSP_136)) > + value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */ > + else > + value = bitfield_replace(value, 0, 1, 1); > + writel(value, host->base + SPMMC_SD_INT_REG); > + > + value = readl(host->base + SPMMC_SD_CONFIG0_REG); > + value = bitfield_replace(value, 4, 2, 0); /* sd_trans_mode */ > + value = bitfield_replace(value, 7, 1, 1); /* sdcmddummy */ > + if (likely(cmd->flags & MMC_RSP_PRESENT)) { > + value = bitfield_replace(value, 6, 1, 1); /* sdautorsp */ > + } else { > + value = bitfield_replace(value, 6, 1, 0); > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > + return; > + } > + /* > + * Currently, host is not capable of checking R2's CRC7, > + * thus, enable crc7 check only for 48 bit response commands > + */ > + if (likely(cmd->flags & MMC_RSP_CRC && !(cmd->flags & MMC_RSP_136))) > + value = bitfield_replace(value, 8, 1, 1); /* sdrspchk_en */ > + else > + value = bitfield_replace(value, 8, 1, 0); > + > + if (unlikely(cmd->flags & MMC_RSP_136)) > + value = bitfield_replace(value, 15, 1, 1); /* sdrsptype */ > + else > + value = bitfield_replace(value, 15, 1, 0); > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > +} > + > +static void spmmc_prepare_data(struct spmmc_host *host, struct mmc_data *data) > +{ > + u32 value, srcdst; > + //struct mmc_command *cmd = data->mrq->cmd; > + > + writel(data->blocks - 1, host->base + SPMMC_SD_PAGE_NUM_REG); > + writel(data->blksz - 1, host->base + SPMMC_SD_BLOCKSIZE_REG); > + value = readl(host->base + SPMMC_SD_CONFIG0_REG); > + if (data->flags & MMC_DATA_READ) { > + value = bitfield_replace(value, 4, 2, 2); /* sd_trans_mode */ > + value = bitfield_replace(value, 6, 1, 0); /* sdautorsp */ > + value = bitfield_replace(value, 7, 1, 0); /* sdcmddummy */ > + srcdst = readl(host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); > + srcdst = bitfield_replace(srcdst, 4, 7, 0x12); > + writel(srcdst, host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); > + } else { > + value = bitfield_replace(value, 4, 2, 1); > + srcdst = readl(host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); > + srcdst = bitfield_replace(srcdst, 4, 7, 0x21); > + writel(srcdst, host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); > + } > + value = bitfield_replace(value, 2, 1, 1); > + if (likely(host->dmapio_mode == SPMMC_DMA_MODE)) { > + struct scatterlist *sg; > + dma_addr_t dma_addr; > + unsigned int dma_size; > + u32 *reg_addr; > + int dma_direction = data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE; > + int i, count = 1; > + > + count = dma_map_sg(host->mmc->parent, data->sg, data->sg_len, dma_direction); > + if (unlikely(!count || count > SPMMC_MAX_DMA_MEMORY_SECTORS)) { > + data->error = -EINVAL; > + return; > + } > + for_each_sg(data->sg, sg, count, i) { > + dma_addr = sg_dma_address(sg); > + dma_size = sg_dma_len(sg) / 512 - 1; > + if (i == 0) { > + writel(dma_addr, host->base + SPMMC_DMA_BASE_ADDR_REG); > + writel(dma_size, host->base + SPMMC_SDRAM_SECTOR_0_SIZE_REG); > + } else { > + reg_addr = host->base + SPMMC_SDRAM_SECTOR_1_ADDR_REG + (i - 1) * 2; > + writel(dma_addr, reg_addr); > + writel(dma_size, reg_addr + 1); > + } > + } > + value = bitfield_replace(value, 0, 1, 0); /* sdpiomode */ > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > + /* enable interrupt if needed */ > + if (!host->use_int && data->blksz * data->blocks > host->dma_int_threshold) { > + host->dma_use_int = 1; > + value = readl(host->base + SPMMC_SD_INT_REG); > + value = bitfield_replace(value, 0, 1, 1); /* sdcmpen */ > + writel(value, host->base + SPMMC_SD_INT_REG); > + } > + } else { > + value = bitfield_replace(value, 0, 1, 1); > + value = bitfield_replace(value, 14, 1, 1); /* rx4_en */ > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > + } > +} > + > +static inline void spmmc_trigger_transaction(struct spmmc_host *host) > +{ > + u32 value = readl(host->base + SPMMC_SD_CTRL_REG); > + > + value = bitfield_replace(value, 0, 1, 1); /* trigger transaction */ > + writel(value, host->base + SPMMC_SD_CTRL_REG); > +} > + > +static void __send_stop_cmd(struct spmmc_host *host) > +{ > + struct mmc_command stop = {}; > + u32 value; > + > + stop.opcode = MMC_STOP_TRANSMISSION; > + stop.arg = 0; > + stop.flags = MMC_RSP_R1B; > + spmmc_prepare_cmd(host, &stop); > + value = readl(host->base + SPMMC_SD_INT_REG); > + value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */ > + writel(value, host->base + SPMMC_SD_INT_REG); > + spmmc_trigger_transaction(host); > + spmmc_wait_finish(host); > +} > + > +/** > + * check if error occurred during transaction. > + * @host - host > + * @mrq - the mrq > + * @return 0 if no error otherwise the error number. > + */ > +static int spmmc_check_error(struct spmmc_host *host, struct mmc_request *mrq) > +{ > + int ret = 0; > + struct mmc_command *cmd = mrq->cmd; > + struct mmc_data *data = mrq->data; > + > + u32 value = readl(host->base + SPMMC_SD_STATE_REG); > + u32 crc_token = bitfield_extract(value, 4, 3); > + > + if (unlikely(value & SPMMC_SDSTATE_ERROR)) { > + u32 timing_cfg0 = 0; > + > + value = readl(host->base + SPMMC_SD_STATUS_REG); > + > + if (host->tuning_info.enable_tuning) { > + timing_cfg0 = readl(host->base + SPMMC_SD_TIMING_CONFIG0_REG); > + host->tuning_info.rd_crc_dly = bitfield_extract(timing_cfg0, 20, 3); > + host->tuning_info.rd_dat_dly = bitfield_extract(timing_cfg0, 16, 3); > + host->tuning_info.rd_rsp_dly = bitfield_extract(timing_cfg0, 12, 3); > + host->tuning_info.wr_cmd_dly = bitfield_extract(timing_cfg0, 8, 3); > + host->tuning_info.wr_dat_dly = bitfield_extract(timing_cfg0, 4, 3); > + } > + > + if (value & SPMMC_SDSTATUS_RSP_TIMEOUT) { > + ret = -ETIMEDOUT; > + host->tuning_info.wr_cmd_dly++; > + } else if (value & SPMMC_SDSTATUS_RSP_CRC7_ERROR) { > + ret = -EILSEQ; > + host->tuning_info.rd_rsp_dly++; > + } else if (data) { > + if ((value & SPMMC_SDSTATUS_STB_TIMEOUT)) { > + ret = -ETIMEDOUT; > + host->tuning_info.rd_dat_dly++; > + } else if (value & SPMMC_SDSTATUS_RDATA_CRC16_ERROR) { > + ret = -EILSEQ; > + host->tuning_info.rd_dat_dly++; > + } else if (value & SPMMC_SDSTATUS_CARD_CRC_CHECK_TIMEOUT) { > + ret = -ETIMEDOUT; > + host->tuning_info.rd_crc_dly++; > + } else if (value & SPMMC_SDSTATUS_CRC_TOKEN_CHECK_ERROR) { > + ret = -EILSEQ; > + if (crc_token == 0x5) > + host->tuning_info.wr_dat_dly++; > + else > + host->tuning_info.rd_crc_dly++; > + } > + } > + cmd->error = ret; > + if (data) { > + data->error = ret; > + data->bytes_xfered = 0; > + } > + if (!host->tuning_info.need_tuning && host->tuning_info.enable_tuning) > + cmd->retries = SPMMC_MAX_RETRIES; /* retry it */ > + spmmc_sw_reset(host); > + mdelay(5); > + > + if (host->tuning_info.enable_tuning) { > + timing_cfg0 = bitfield_replace(timing_cfg0, 20, 3, > + host->tuning_info.rd_crc_dly); > + timing_cfg0 = bitfield_replace(timing_cfg0, 16, 3, > + host->tuning_info.rd_dat_dly); > + timing_cfg0 = bitfield_replace(timing_cfg0, 12, 3, > + host->tuning_info.rd_rsp_dly); > + timing_cfg0 = bitfield_replace(timing_cfg0, 8, 3, > + host->tuning_info.wr_cmd_dly); > + timing_cfg0 = bitfield_replace(timing_cfg0, 4, 3, > + host->tuning_info.wr_dat_dly); > + writel(timing_cfg0, host->base + SPMMC_SD_TIMING_CONFIG0_REG); > + } > + } else if (data) { > + data->error = 0; > + data->bytes_xfered = data->blocks * data->blksz; > + } > + host->tuning_info.need_tuning = ret; > + /* controller will not send cmd 12 automatically if error occurred */ > + if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || > + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) { > + __send_stop_cmd(host); > + spmmc_sw_reset(host); > + } > + return ret; > +} > + > +/** > + * the strategy is: > + * 1. if several continuous delays are acceptable, we choose a middle one; > + * 2. otherwise, we choose the first one. > + */ > +static inline int __find_best_delay(u8 candidate_dly) > +{ > + int f, w; > + > + if (!candidate_dly) > + return 0; > + f = ffs(candidate_dly) - 1; > + w = hweight8(candidate_dly); > + if (0xff == (bitfield_mask(f, w) & ~candidate_dly)) > + return (f + w / 2); > + else > + return (f); > +} > + > +static inline __maybe_unused void spmmc_txdummy(struct spmmc_host *host, int count) > +{ > + u32 value; > + > + count &= 0x1ff; > + value = readl(host->base + SPMMC_SD_CONFIG1_REG); > + value = bitfield_replace(value, 0, 9, count); > + writel(value, host->base + SPMMC_SD_CONFIG1_REG); > + value = readl(host->base + SPMMC_SD_CTRL_REG); > + value = bitfield_replace(value, 1, 1, 1); /* trigger tx dummy */ > + writel(value, host->base + SPMMC_SD_CTRL_REG); > +} > + > +static void spmmc_xfer_data_pio(struct spmmc_host *host, struct mmc_data *data) > +{ > + u32 *buf; /* tx/rx 4 bytes one time in pio mode */ > + int data_left = data->blocks * data->blksz; > + int consumed, remain; > + > + struct sg_mapping_iter *sg_miter = &host->sg_miter; > + unsigned int flags = 0; > + > + if (data->flags & MMC_DATA_WRITE) > + flags |= SG_MITER_FROM_SG; > + else > + flags |= SG_MITER_TO_SG; > + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); > + while (data_left > 0) { > + consumed = 0; > + if (!sg_miter_next(sg_miter)) > + break; > + buf = sg_miter->addr; > + remain = sg_miter->length; > + do { > + if (data->flags & MMC_DATA_WRITE) { > + if (spmmc_wait_txbuf_empty(host)) > + goto done; > + writel(*buf, host->base + SPMMC_SD_PIODATATX_REG); > + } else { > + if (spmmc_wait_rxbuf_full(host)) > + goto done; > + *buf = readl(host->base + SPMMC_SD_PIODATARX_REG); > + } > + buf++; > + consumed += 4; > + remain -= 4; > + } while (remain); > + sg_miter->consumed = consumed; > + data_left -= consumed; > + } > +done: > + sg_miter_stop(sg_miter); > +} > + > +static void spmmc_controller_init(struct spmmc_host *host) > +{ > + u32 value; > + int ret = reset_control_assert(host->rstc); > + > + if (!ret) { > + mdelay(1); > + ret = reset_control_deassert(host->rstc); > + } > + > + value = readl(host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); > + value = bitfield_replace(value, 0, 3, SPMMC_MEDIA_SD); > + writel(value, host->base + SPMMC_CARD_MEDIATYPE_SRCDST_REG); > + host->signal_voltage = MMC_SIGNAL_VOLTAGE_330; > +} > + > +static void spmmc_set_power_mode(struct spmmc_host *host, struct mmc_ios *ios) > +{ > + if (host->power_state == ios->power_mode) > + return; > + > + switch (ios->power_mode) { > + /* power off->up->on */ > + case MMC_POWER_ON: > + spmmc_controller_init(host); > + pm_runtime_get_sync(host->mmc->parent); > + break; > + case MMC_POWER_UP: > + break; > + case MMC_POWER_OFF: > + pm_runtime_put(host->mmc->parent); > + break; > + } > + host->power_state = ios->power_mode; > +} > + > +/** > + * 1. unmap scatterlist if needed; > + * 2. get response & check error conditions; > + * 3. unlock host->mrq_lock > + * 4. notify mmc layer the request is done > + */ > +static void spmmc_finish_request(struct spmmc_host *host, struct mmc_request *mrq) > +{ > + struct mmc_command *cmd; > + struct mmc_data *data; > + > + if (!mrq) > + return; > + > + cmd = mrq->cmd; > + data = mrq->data; > + > + if (data && SPMMC_DMA_MODE == host->dmapio_mode) { > + int dma_direction = data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE; > + > + dma_unmap_sg(host->mmc->parent, data->sg, data->sg_len, dma_direction); > + host->dma_use_int = 0; > + } > + spmmc_get_rsp(host, cmd); > + spmmc_check_error(host, mrq); > + host->mrq = NULL; > + mutex_unlock(&host->mrq_lock); > + mmc_request_done(host->mmc, mrq); > +} > + > +/* Interrupt Service Routine */ > +irqreturn_t spmmc_irq(int irq, void *dev_id) > +{ > + struct spmmc_host *host = dev_id; > + u32 value = readl(host->base + SPMMC_SD_INT_REG); > + > + spin_lock(&host->lock); > + if ((value & SPMMC_SDINT_SDCMP) && (value & SPMMC_SDINT_SDCMPEN)) { > + value = bitfield_replace(value, 0, 1, 0); /* disable sdcmp */ > + value = bitfield_replace(value, 2, 1, 1); /* sd_cmp_clr */ > + writel(value, host->base + SPMMC_SD_INT_REG); > + /* if error occurred, we my need send cmd 12 to stop data transaction,*/ > + /* which is time consuming, so make use of tasklet to handle this.*/ > + if (unlikely(readl(host->base + SPMMC_SD_STATE_REG) & SPMMC_SDSTATE_ERROR)) > + tasklet_schedule(&host->tsklet_finish_req); > + else > + spmmc_finish_request(host, host->mrq); > + } > + if (value & SPMMC_SDINT_SDIO && > + (value & SPMMC_SDINT_SDIOEN)) { > + mmc_signal_sdio_irq(host->mmc); > + } > + spin_unlock(&host->lock); > + return IRQ_HANDLED; > +} > + > +static void spmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) > +{ > + struct spmmc_host *host = mmc_priv(mmc); > + struct mmc_data *data; > + struct mmc_command *cmd; > + int ret; > + > + ret = mutex_lock_interruptible(&host->mrq_lock); > + if (ret) > + return; > + > + host->mrq = mrq; > + data = mrq->data; > + cmd = mrq->cmd; > + > + spmmc_prepare_cmd(host, cmd); > + /* we need manually read response R2. */ > + if (unlikely(cmd->flags & MMC_RSP_136)) { > + spmmc_trigger_transaction(host); > + spmmc_get_rsp(host, cmd); > + spmmc_wait_finish(host); > + spmmc_check_error(host, mrq); > + host->mrq = NULL; > + mutex_unlock(&host->mrq_lock); > + mmc_request_done(host->mmc, mrq); > + } else { > + if (data) > + spmmc_prepare_data(host, data); > + > + if (unlikely(host->dmapio_mode == SPMMC_PIO_MODE && data)) { > + u32 value; > + /* pio data transfer do not use interrupt */ > + value = readl(host->base + SPMMC_SD_INT_REG); > + value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */ > + writel(value, host->base + SPMMC_SD_INT_REG); > + spmmc_trigger_transaction(host); > + spmmc_xfer_data_pio(host, data); > + spmmc_wait_finish(host); > + spmmc_finish_request(host, mrq); > + } else { > + if (!(host->use_int || host->dma_use_int)) { > + spmmc_trigger_transaction(host); > + spmmc_wait_finish(host); > + spmmc_finish_request(host, mrq); > + } else { > + spmmc_trigger_transaction(host); > + } > + } > + } > +} > + > +static void spmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > +{ > + struct spmmc_host *host = (struct spmmc_host *)mmc_priv(mmc); > + > + mutex_lock(&host->mrq_lock); > + spmmc_set_power_mode(host, ios); > + spmmc_set_bus_clk(host, ios->clock); > + spmmc_set_bus_timing(host, ios->timing); > + spmmc_set_bus_width(host, ios->bus_width); > + /* ensure mode is correct, because we might have hw reset the controller */ > + spmmc_select_mode(host, host->mode); > + mutex_unlock(&host->mrq_lock); > + //return; > +} > + > +/** > + * Return values for the get_cd callback should be: > + * 0 for a absent card > + * 1 for a present card > + * -ENOSYS when not supported (equal to NULL callback) > + * or a negative errno value when something bad happened > + */ > +int spmmc_get_cd(struct mmc_host *mmc) > +{ > + int ret = 0; > + > + if (mmc_can_gpio_cd(mmc)) > + ret = mmc_gpio_get_cd(mmc); > + > + if (ret < 0) > + ret = 0; > + > + return ret; > +} > + > +static int spmmc_execute_tuning(struct mmc_host *mmc, u32 opcode) > +{ > + struct spmmc_host *host = mmc_priv(mmc); > + const u8 *blk_pattern; > + u8 *blk_test; > + int blksz; > + u8 smpl_dly = 0, candidate_dly = 0; > + u32 value; > + > + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) { > + blk_pattern = tuning_blk_pattern_8bit; > + blksz = sizeof(tuning_blk_pattern_8bit); > + } else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) { > + blk_pattern = tuning_blk_pattern_4bit; > + blksz = sizeof(tuning_blk_pattern_4bit); > + } else { > + return -EINVAL; > + } > + > + blk_test = kmalloc(blksz, GFP_KERNEL); > + if (!blk_test) > + return -ENOMEM; > + > + host->tuning_info.enable_tuning = 0; > + do { > + struct mmc_request mrq = {NULL}; > + struct mmc_command cmd = {0}; > + struct mmc_command stop = {0}; > + struct mmc_data data = {0}; > + struct scatterlist sg; > + > + cmd.opcode = opcode; > + cmd.arg = 0; > + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; > + > + stop.opcode = MMC_STOP_TRANSMISSION; > + stop.arg = 0; > + stop.flags = MMC_RSP_R1B | MMC_CMD_AC; > + > + data.blksz = blksz; > + data.blocks = 1; > + data.flags = MMC_DATA_READ; > + data.sg = &sg; > + data.sg_len = 1; > + > + sg_init_one(&sg, blk_test, blksz); > + mrq.cmd = &cmd; > + mrq.stop = &stop; > + mrq.data = &data; > + host->mrq = &mrq; > + > + value = readl(host->base + SPMMC_SD_TIMING_CONFIG0_REG); > + value = bitfield_replace(value, 12, 3, smpl_dly); /* sd_rd_rsp_dly_sel */ > + value = bitfield_replace(value, 16, 3, smpl_dly); /* sd_rd_dat_dly_sel */ > + value = bitfield_replace(value, 20, 3, smpl_dly); /* sd_rd_crc_dly_sel */ > + writel(value, host->base + SPMMC_SD_TIMING_CONFIG0_REG); > + > + mmc_wait_for_req(mmc, &mrq); > + if (!cmd.error && !data.error) { > + if (!memcmp(blk_pattern, blk_test, blksz)) > + candidate_dly |= (1 << smpl_dly); > + } > + } while (smpl_dly++ <= SPMMC_MAX_TUNABLE_DLY); > + host->tuning_info.enable_tuning = 1; > + > + if (candidate_dly) { > + smpl_dly = __find_best_delay(candidate_dly); > + value = readl(host->base + SPMMC_SD_TIMING_CONFIG0_REG); > + value = bitfield_replace(value, 12, 3, smpl_dly); /* sd_rd_rsp_dly_sel */ > + value = bitfield_replace(value, 16, 3, smpl_dly); /* sd_rd_dat_dly_sel */ > + value = bitfield_replace(value, 20, 3, smpl_dly); /* sd_rd_crc_dly_sel */ > + writel(value, host->base + SPMMC_SD_TIMING_CONFIG0_REG); > + return 0; > + } > + return -EIO; > +} > + > +static void spmmc_enable_sdio_irq(struct mmc_host *mmc, int enable) > +{ > + struct spmmc_host *host = mmc_priv(mmc); > + u32 value = readl(host->base + SPMMC_SD_INT_REG); > + > + value = bitfield_replace(value, 5, 1, 1); /* sdio_int_clr */ > + if (enable) > + value = bitfield_replace(value, 3, 1, 1); > + else > + value = bitfield_replace(value, 3, 1, 0); > + writel(value, host->base + SPMMC_SD_INT_REG); > +} > + > +static const struct mmc_host_ops spmmc_ops = { > + .request = spmmc_request, > + .set_ios = spmmc_set_ios, > + .get_cd = spmmc_get_cd, > + .execute_tuning = spmmc_execute_tuning, > + .enable_sdio_irq = spmmc_enable_sdio_irq, > +}; > + > +static void tsklet_func_finish_req(unsigned long data) > +{ > + struct spmmc_host *host = (struct spmmc_host *)data; > + > + spin_lock(&host->lock); > + spmmc_finish_request(host, host->mrq); > + spin_unlock(&host->lock); > +} > + > +static int spmmc_drv_probe(struct platform_device *pdev) > +{ > + int ret = 0; > + struct mmc_host *mmc; > + struct resource *res; > + struct spmmc_host *host; > + unsigned int mode; > + > + mmc = mmc_alloc_host(sizeof(*host), &pdev->dev); > + if (!mmc) { > + ret = -ENOMEM; > + goto probe_free_host; > + } > + > + host = mmc_priv(mmc); > + host->mmc = mmc; > + host->power_state = MMC_POWER_OFF; > + host->dma_int_threshold = 1024; > + host->dmapio_mode = SPMMC_DMA_MODE; > + > + host->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); > + if (IS_ERR(host->base)) > + return PTR_ERR(host->base); > + > + host->clk = devm_clk_get(&pdev->dev, NULL); > + if (IS_ERR(host->clk)) { > + dev_err(&pdev->dev, "Can not find clock source\n"); > + ret = PTR_ERR(host->clk); > + goto probe_free_host; > + } > + > + host->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); > + if (IS_ERR(host->rstc)) { > + dev_err(&pdev->dev, "Can not find reset controller\n"); > + ret = PTR_ERR(host->rstc); > + goto probe_free_host; > + } > + > + host->irq = platform_get_irq(pdev, 0); > + if (host->irq <= 0) { > + dev_err(&pdev->dev, "get sd irq resource fail\n"); > + ret = -EINVAL; > + goto probe_free_host; > + } > + if (devm_request_irq(&pdev->dev, host->irq, spmmc_irq, IRQF_SHARED, > + dev_name(&pdev->dev), host)) { > + dev_err(&pdev->dev, "Failed to request sd card interrupt.\n"); > + ret = -ENOENT; > + goto probe_free_host; > + } > + > + ret = mmc_of_parse(mmc); > + if (ret) > + goto probe_free_host; > + > + ret = clk_prepare(host->clk); > + if (ret) > + goto probe_free_host; > + ret = clk_enable(host->clk); > + if (ret) > + goto probe_clk_unprepare; > + > + spin_lock_init(&host->lock); > + mutex_init(&host->mrq_lock); > + tasklet_init(&host->tsklet_finish_req, tsklet_func_finish_req, (unsigned long)host); > + mmc->ops = &spmmc_ops; > + mmc->f_min = SPMMC_MIN_CLK; > + if (mmc->f_max > SPMMC_MAX_CLK) > + mmc->f_max = SPMMC_MAX_CLK; > + > + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; > + mmc->max_seg_size = SPMMC_MAX_BLK_COUNT * 512; > + /* Host controller supports up to "SPMMC_MAX_DMA_MEMORY_SECTORS"*/ > + /* a.k.a. max scattered memory segments per request*/ > + mmc->max_segs = SPMMC_MAX_DMA_MEMORY_SECTORS; > + mmc->max_req_size = SPMMC_MAX_BLK_COUNT * 512; > + /* Limited by the max value of dma_size & data_length, set it to 512 bytes for now */ > + mmc->max_blk_size = 512; > + mmc->max_blk_count = SPMMC_MAX_BLK_COUNT; /* Limited by sd_page_num */ > + > + dev_set_drvdata(&pdev->dev, host); > + spmmc_controller_init(host); > + mode = (int)of_device_get_match_data(&pdev->dev); > + spmmc_select_mode(host, mode); > + mmc_add_host(mmc); > + host->tuning_info.enable_tuning = 1; > + pm_runtime_set_active(&pdev->dev); > + pm_runtime_enable(&pdev->dev); > + > + return 0; > + > +probe_clk_unprepare: > + dev_err(&pdev->dev, "unable to enable controller clock\n"); > + clk_unprepare(host->clk); > +probe_free_host: > + if (mmc) > + mmc_free_host(mmc); > + > + return ret; > +} > + > +static int spmmc_drv_remove(struct platform_device *dev) > +{ > + struct spmmc_host *host = platform_get_drvdata(dev); > + > + mmc_remove_host(host->mmc); > + clk_disable(host->clk); > + clk_unprepare(host->clk); > + pm_runtime_disable(&dev->dev); > + platform_set_drvdata(dev, NULL); > + mmc_free_host(host->mmc); > + return 0; > +} > + > +static int spmmc_drv_suspend(struct platform_device *dev, pm_message_t state) > +{ > + struct spmmc_host *host; > + > + host = platform_get_drvdata(dev); > + mutex_lock(&host->mrq_lock); /* Make sure that no one is holding the controller */ > + mutex_unlock(&host->mrq_lock); > + clk_disable(host->clk); > + return 0; > +} > + > +static int spmmc_drv_resume(struct platform_device *dev) > +{ > + struct spmmc_host *host; > + > + host = platform_get_drvdata(dev); > + return clk_enable(host->clk); > +} > + > +#ifdef CONFIG_PM > +#ifdef CONFIG_PM_SLEEP > +static int spmmc_pm_suspend(struct device *dev) > +{ > + pm_runtime_force_suspend(dev); > + return 0; > +} > + > +static int spmmc_pm_resume(struct device *dev) > +{ > + pm_runtime_force_resume(dev); > + return 0; > +} > +#endif /* ifdef CONFIG_PM_SLEEP */ > + > +#ifdef CONFIG_PM_RUNTIME > +static int spmmc_pm_runtime_suspend(struct device *dev) > +{ > + struct spmmc_host *host; > + > + host = dev_get_drvdata(dev); > + clk_disable(host->clk); > + return 0; > +} > + > +static int spmmc_pm_runtime_resume(struct device *dev) > +{ > + struct spmmc_host *host; > + > + host = dev_get_drvdata(dev); > + return clk_enable(host->clk); > +} > +#endif /* ifdef CONFIG_PM_RUNTIME */ > + > +static const struct dev_pm_ops spmmc_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(spmmc_pm_suspend, spmmc_pm_resume) > +#ifdef CONFIG_PM_RUNTIME > + SET_RUNTIME_PM_OPS(spmmc_pm_runtime_suspend, spmmc_pm_runtime_resume, NULL) > +#endif > +}; > +#endif /* ifdef CONFIG_PM */ > + > +static const struct of_device_id spmmc_of_table[] = { > + { > + .compatible = "sunplus,sp7021-emmc", > + .data = (void *)SPMMC_MODE_EMMC, > + }, > + {/* sentinel */} > +}; > +MODULE_DEVICE_TABLE(of, spmmc_of_table); > + > +static struct platform_driver spmmc_driver = { > + .probe = spmmc_drv_probe, > + .remove = spmmc_drv_remove, > + .suspend = spmmc_drv_suspend, > + .resume = spmmc_drv_resume, > + .driver = { > + .name = "spmmc", > + .owner = THIS_MODULE, > +#ifdef CONFIG_PM > + .pm = &spmmc_pm_ops, > +#endif > + .of_match_table = spmmc_of_table, > + }, > +}; > +module_platform_driver(spmmc_driver); > + > +MODULE_AUTHOR("Tony Huang <tonyhuang.sunplus@gmail.com>"); > +MODULE_DESCRIPTION("Sunplus MMC controller driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH v2 2/2] mmc: Add mmc driver for Sunplus SP7021 2022-01-11 15:23 ` Ulf Hansson @ 2022-01-12 10:18 ` Tony Huang 黃懷厚 0 siblings, 0 replies; 6+ messages in thread From: Tony Huang 黃懷厚 @ 2022-01-12 10:18 UTC (permalink / raw) To: Ulf Hansson, Tony Huang, Li-hao Kuo, Lh Kuo 郭力豪 Cc: robh+dt, linux-mmc, devicetree, linux-kernel, p.zabel, Wells Lu 呂芳騰 Dear Ulf Hansson: > Subject: Re: [PATCH v2 2/2] mmc: Add mmc driver for Sunplus SP7021 > > + Li-hau Kuo, > > On Wed, 5 Jan 2022 at 06:20, Tony Huang <tonyhuang.sunplus@gmail.com> > wrote: > > > > Add mmc driver for Sunplus SP7021 > > > > Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com> > > There is another driver that has been posted for the eMMC/SD/SDIO > controller for Sunplus SP7021 [1]. Without going into the details it > looks like it's a very similar IP block - or at least it's just a > slightly different version of it. > > Rather than using one separate driver per version of the IP block, I > strongly suggest that we combine the drivers into one driver. > > I fully understand that we need to distinguish the variants in the > driver, which should be done by using one compatible string per > variant of the IP block. Moreover, we have existing common mmc DT > bindings, thus allowing the block to be used for one of SD, SDIO or > eMMC ("no-sd", "no-sdio" and "no-mmc"), which seem like it can be > useful for this case. > We will follow your suggestion. SD/SDIO/eMMC combined into on driver. > That said, before I start reviewing this, perhaps $subject patch is > still a good starting point, then we can add support for the SD/SDIO > part/variant on top to the same driver. Would that make sense or do > you prefer another path forward? > > Kind regards > Uffe > > [1] > https://patchwork.kernel.org/project/linux-mmc/list/?series=601160 > > > --- > > Changes in v2: > > - Remove unused code. > > - Modify read/write register address. > > > > MAINTAINERS | 1 + > > drivers/mmc/host/sunplus_mmc.c | 1204 > ++++++++++++++++++++++++++++++++++++++++ > > 2 files changed, 1205 insertions(+) > > create mode 100644 drivers/mmc/host/sunplus_mmc.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 01ed57a..bf8c066 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -18246,6 +18246,7 @@ SUNPLUS MMC DRIVER > > M: Tony Huang <tonyhuang.sunplus@gmail.com> > > S: Maintained > > F: Documentation/devicetree/bindings/mmcc/sunplu-mmc.yaml > > +F: drivers/mmc/host/sunplus_mmc.c > > > > SUPERH > > M: Yoshinori Sato <ysato@users.sourceforge.jp> > > diff --git a/drivers/mmc/host/sunplus_mmc.c > b/drivers/mmc/host/sunplus_mmc.c > > new file mode 100644 > > index 0000000..78716cf > > --- /dev/null > > +++ b/drivers/mmc/host/sunplus_mmc.c > > @@ -0,0 +1,1204 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright (c) Sunplus Inc. > > + * Author: Tony Huang <tonyhuang.sunplus@gmail.com> > > + */ > > + > > +#include <linux/bitops.h> > > +#include <linux/clk.h> > > +#include <linux/delay.h> > > +#include <linux/dma-mapping.h> > > +#include <linux/interrupt.h> > > +#include <linux/mmc/core.h> > > +#include <linux/mmc/host.h> > > +#include <linux/mmc/mmc.h> > > +#include <linux/mmc/slot-gpio.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_device.h> > > +#include <linux/pm_runtime.h> > > +#include <linux/reset.h> > > + > > +#define SPMMC_MIN_CLK 400000 > > +#define SPMMC_MAX_CLK 52000000 > > +#define SPMMC_MAX_BLK_COUNT 65536 > > +#define SPMMC_MAX_TUNABLE_DLY 7 > > + > > +#define SPMMC_CARD_MEDIATYPE_SRCDST_REG 0x0000 > > +#define SPMMC_MEDIA_NONE 0 > > +#define SPMMC_MEDIA_SD 6 > > +#define SPMMC_MEDIA_MS 7 > > + > > +#define SPMMC_SDRAM_SECTOR_0_SIZE_REG 0x0008 > > +#define SPMMC_DMA_BASE_ADDR_REG > 0x000C > > +#define SPMMC_HW_DMA_CTRL_REG 0x0010 > > +#define SPMMC_MAX_DMA_MEMORY_SECTORS 8 > > + > > +#define SPMMC_SDRAM_SECTOR_1_ADDR_REG 0x0018 > > + > > +#define SPMMC_SD_INT_REG 0x0088 > > +#define SPMMC_SDINT_SDCMPEN BIT(0) > > +#define SPMMC_SDINT_SDCMP BIT(1) > > +#define SPMMC_SDINT_SDIOEN BIT(3) > > +#define SPMMC_SDINT_SDIO BIT(4) > > + > > +#define SPMMC_SD_PAGE_NUM_REG 0x008C > > +#define SPMMC_SD_CONFIG0_REG 0x0090 > > +#define SPMMC_MODE_SD 0 > > +#define SPMMC_MODE_EMMC 1 > > +#define SPMMC_MODE_SDIO 2 > > + > > +#define SPMMC_SDIO_CTRL_REG 0x0094 > > +#define SPMMC_SD_RST_REG 0x0098 > > +#define SPMMC_SD_CTRL_REG 0x009C > > + > > +#define SPMMC_SD_STATUS_REG > 0x00A0 > > +#define SPMMC_SDSTATUS_DUMMY_READY > BIT(0) > > +#define SPMMC_SDSTATUS_RSP_BUF_FULL > BIT(1) > > +#define SPMMC_SDSTATUS_TX_DATA_BUF_EMPTY BIT(2) > > +#define SPMMC_SDSTATUS_RX_DATA_BUF_FULL > BIT(3) > > +#define SPMMC_SDSTATUS_CMD_PIN_STATUS BIT(4) > > +#define SPMMC_SDSTATUS_DAT0_PIN_STATUS BIT(5) > > +#define SPMMC_SDSTATUS_RSP_TIMEOUT > BIT(6) > > +#define SPMMC_SDSTATUS_CARD_CRC_CHECK_TIMEOUT BIT(7) > > +#define SPMMC_SDSTATUS_STB_TIMEOUT > BIT(8) > > +#define SPMMC_SDSTATUS_RSP_CRC7_ERROR BIT(9) > > +#define SPMMC_SDSTATUS_CRC_TOKEN_CHECK_ERROR BIT(10) > > +#define SPMMC_SDSTATUS_RDATA_CRC16_ERROR > BIT(11) > > +#define SPMMC_SDSTATUS_SUSPEND_STATE_READY > BIT(12) > > +#define SPMMC_SDSTATUS_BUSY_CYCLE > BIT(13) > > +#define SPMMC_SDSTATUS_DAT1_PIN_STATUS BIT(14) > > +#define SPMMC_SDSTATUS_SD_SENSE_STATUS BIT(15) > > +#define SPMMC_SDSTATUS_BOOT_ACK_TIMEOUT > BIT(16) > > +#define SPMMC_SDSTATUS_BOOT_DATA_TIMEOUT > BIT(17) > > +#define SPMMC_SDSTATUS_BOOT_ACK_ERROR > BIT(18) > > + > > +#define SPMMC_SD_STATE_REG 0x00A4 > > +#define SPMMC_SDSTATE_ERROR BIT(13) > > +#define SPMMC_SDSTATE_FINISH BIT(14) > > + > > +#define SPMMC_SD_HW_STATE_REG 0x00A8 > > +#define SPMMC_SD_BLOCKSIZE_REG 0x00AC > > +#define SPMMC_SD_CONFIG1_REG 0x00B0 > > +#define SPMMC_SD_TIMING_CONFIG0_REG 0x00B4 > > +#define SPMMC_SD_PIODATATX_REG 0x00BC > > +#define SPMMC_SD_PIODATARX_REG 0x00C0 > > +#define SPMMC_SD_CMDBUF0_3_REG 0x00C4 > > +#define SPMMC_SD_CMDBUF4_REG 0x00C8 > > +#define SPMMC_SD_RSPBUF0_3_REG 0x00CC > > +#define SPMMC_SD_RSPBUF4_5_REG 0x00D0 > > + > > +struct spmmc_tuning_info { > > + int enable_tuning; > > + int need_tuning; > > +#define SPMMC_MAX_RETRIES (8 * 8) > > + int retried; /* how many times has been retried */ > > + u32 rd_crc_dly:3; > > + u32 rd_dat_dly:3; > > + u32 rd_rsp_dly:3; > > + u32 wr_cmd_dly:3; > > + u32 wr_dat_dly:3; > > + u32 clk_dly:3; > > +}; > > + > > +struct spmmc_host { > > + void __iomem *base; > > + struct clk *clk; > > + struct reset_control *rstc; > > + int mode; /* SD/SDIO/eMMC */ > > + spinlock_t lock; /* controller lock */ > > + struct mutex mrq_lock; > > + /* tasklet used to handle error then finish the request */ > > + struct tasklet_struct tsklet_finish_req; > > + struct mmc_host *mmc; > > + struct mmc_request *mrq; /* current mrq */ > > + > > + int irq; > > + int use_int; /* should raise irq when done? */ > > + int power_state; /* current power state: off/up/on */ > > + int ddr_enabled; > > + int signal_voltage; > > +#define SPMMC_DMA_MODE 0 > > +#define SPMMC_PIO_MODE 1 > > + int dmapio_mode; > > + /* for purpose of reducing context switch, only when transfer data > that*/ > > + /* length is greater than `dma_int_threshold' should use interrupt > */ > > + int dma_int_threshold; > > + struct sg_mapping_iter sg_miter; /* for pio mode to access sglist > */ > > + int dma_use_int; /* should raise irq when dma done */ > > + struct spmmc_tuning_info tuning_info; > > +}; > > + > > +static const u8 tuning_blk_pattern_4bit[] = { > > + 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, > > + 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef, > > + 0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb, > > + 0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef, > > + 0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c, > > + 0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee, > > + 0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff, > > + 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde, > > +}; > > + > > +static const u8 tuning_blk_pattern_8bit[] = { > > + 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00, > > + 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc, > > + 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff, > > + 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff, > > + 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd, > > + 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb, > > + 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff, > > + 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff, > > + 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, > > + 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, > > + 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, > > + 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, > > + 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, > > + 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, > > + 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, > > + 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, > > +}; > > + > > +/* Produces a mask of set bits covering a range of a 32-bit value */ > > +static inline u32 bitfield_mask(u32 shift, u32 width) > > +{ > > + return ((1 << width) - 1) << shift; > > +} > > + > > +/* Extract the value of a bitfield found within a given register value */ > > +static inline u32 bitfield_extract(u32 reg_val, u32 shift, u32 width) > > +{ > > + return (reg_val & bitfield_mask(shift, width)) >> shift; > > +} > > + > > +/* Replace the value of a bitfield found within a given register value */ > > +static inline u32 bitfield_replace(u32 reg_val, u32 shift, u32 width, u32 val) > > +{ > > + u32 mask = bitfield_mask(shift, width); > > + > > + return (reg_val & ~mask) | (val << shift); > > +} > > + > > +/** > > + * wait for transaction done, return -1 if error. > > + */ > > +static inline int spmmc_wait_finish(struct spmmc_host *host) > > +{ > > + /* Wait for transaction finish */ > > + unsigned long timeout = jiffies + msecs_to_jiffies(5000); > > + > > + while (!time_after(jiffies, timeout)) { > > + if (readl(host->base + SPMMC_SD_STATE_REG) & > SPMMC_SDSTATE_FINISH) > > + return 0; > > + if (readl(host->base + SPMMC_SD_STATE_REG) & > SPMMC_SDSTATE_ERROR) > > + return -1; > > + } > > + return -1; > > +} > > + > > +static inline int spmmc_wait_sdstatus(struct spmmc_host *host, unsigned > int status_bit) > > +{ > > + unsigned long timeout = jiffies + msecs_to_jiffies(5000); > > + > > + while (!time_after(jiffies, timeout)) { > > + if (readl(host->base + SPMMC_SD_STATUS_REG) & > status_bit) > > + return 0; > > + if (readl(host->base + SPMMC_SD_STATE_REG) & > SPMMC_SDSTATE_ERROR) > > + return -1; > > + } > > + return -1; > > +} > > + > > +#define spmmc_wait_rspbuf_full(host) spmmc_wait_sdstatus(host, > SPMMC_SDSTATUS_RSP_BUF_FULL) > > +#define spmmc_wait_rxbuf_full(host) spmmc_wait_sdstatus(host, > SPMMC_SDSTATUS_RX_DATA_BUF_FULL) > > +#define spmmc_wait_txbuf_empty(host) spmmc_wait_sdstatus(host, > SPMMC_SDSTATUS_TX_DATA_BUF_EMPTY) > > + > > +static void spmmc_get_rsp(struct spmmc_host *host, struct > mmc_command *cmd) > > +{ > > + u32 value0_3, value4_5; > > + > > + if (unlikely(!(cmd->flags & MMC_RSP_PRESENT))) > > + return; > > + if (unlikely(cmd->flags & MMC_RSP_136)) { > > + if (spmmc_wait_rspbuf_full(host)) > > + return; > > + value0_3 = readl(host->base + > SPMMC_SD_RSPBUF0_3_REG); > > + value4_5 = readl(host->base + > SPMMC_SD_RSPBUF4_5_REG) & 0xffff; > > + cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8); > > + cmd->resp[1] = value4_5 << 24; > > + value0_3 = readl(host->base + > SPMMC_SD_RSPBUF0_3_REG); > > + value4_5 = readl(host->base + > SPMMC_SD_RSPBUF4_5_REG) & 0xffff; > > + cmd->resp[1] |= value0_3 >> 8; > > + cmd->resp[2] = value0_3 << 24; > > + cmd->resp[2] |= value4_5 << 8; > > + value0_3 = readl(host->base + > SPMMC_SD_RSPBUF0_3_REG); > > + value4_5 = readl(host->base + > SPMMC_SD_RSPBUF4_5_REG) & 0xffff; > > + cmd->resp[2] |= value0_3 >> 24; > > + cmd->resp[3] = value0_3 << 8; > > + cmd->resp[3] |= value4_5 >> 8; > > + } else { > > + if (spmmc_wait_rspbuf_full(host)) > > + return; > > + value0_3 = readl(host->base + > SPMMC_SD_RSPBUF0_3_REG); > > + value4_5 = readl(host->base + > SPMMC_SD_RSPBUF4_5_REG) & 0xffff; > > + cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8); > > + cmd->resp[1] = value4_5 << 24; > > + } > > + //return; > > +} > > + > > +static void spmmc_set_bus_clk(struct spmmc_host *host, int clk) > > +{ > > + unsigned int clkdiv; > > + int f_min = host->mmc->f_min; > > + int f_max = host->mmc->f_max; > > + u32 value = readl(host->base + SPMMC_SD_CONFIG0_REG); > > + > > + if (clk < f_min) > > + clk = f_min; > > + if (clk > f_max) > > + clk = f_max; > > + > > + clkdiv = (clk_get_rate(host->clk) + clk) / clk - 1; > > + if (clkdiv > 0xfff) > > + clkdiv = 0xfff; > > + > > + value = bitfield_replace(value, 20, 12, clkdiv); > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > + > > + /* In order to reduce the frequency of context switch, > > + * if it is high speed or upper, we do not use interrupt > > + * when send a command that without data transferring. > > + */ > > + if (clk > 25000000) > > + host->use_int = 0; > > + else > > + host->use_int = 1; > > +} > > + > > +static void spmmc_set_bus_timing(struct spmmc_host *host, unsigned int > timing) > > +{ > > + u32 value = readl(host->base + SPMMC_SD_CONFIG1_REG); > > + int clkdiv = readl(host->base + SPMMC_SD_CONFIG0_REG) >> 20; > > + int delay = clkdiv / 2 < 7 ? clkdiv / 2 : 7; > > + int hs_en = 1; > > + char *timing_name; > > + > > + host->ddr_enabled = 0; > > + switch (timing) { > > + case MMC_TIMING_LEGACY: > > + hs_en = 0; > > + timing_name = "legacy"; > > + break; > > + case MMC_TIMING_MMC_HS: > > + timing_name = "mmc high-speed"; > > + break; > > + case MMC_TIMING_SD_HS: > > + timing_name = "sd high-speed"; > > + break; > > + case MMC_TIMING_UHS_SDR50: > > + timing_name = "sd uhs SDR50"; > > + break; > > + case MMC_TIMING_UHS_SDR104: > > + timing_name = "sd uhs SDR104"; > > + break; > > + case MMC_TIMING_UHS_DDR50: > > + host->ddr_enabled = 1; > > + timing_name = "sd uhs DDR50"; > > + break; > > + case MMC_TIMING_MMC_DDR52: > > + host->ddr_enabled = 1; > > + timing_name = "mmc DDR52"; > > + break; > > + case MMC_TIMING_MMC_HS200: > > + timing_name = "mmc HS200"; > > + break; > > + default: > > + timing_name = "invalid"; > > + hs_en = 0; > > + break; > > + } > > + > > + if (hs_en) { > > + value = bitfield_replace(value, 31, 1, 1); /* > sd_high_speed_en */ > > + writel(value, host->base + SPMMC_SD_CONFIG1_REG); > > + value = readl(host->base + > SPMMC_SD_TIMING_CONFIG0_REG); > > + value = bitfield_replace(value, 4, 3, delay); /* > sd_wr_dat_dly_sel */ > > + value = bitfield_replace(value, 8, 3, delay); /* > sd_wr_cmd_dly_sel */ > > + writel(value, host->base + > SPMMC_SD_TIMING_CONFIG0_REG); > > + } else { > > + value = bitfield_replace(value, 31, 1, 0); > > + writel(value, host->base + SPMMC_SD_CONFIG1_REG); > > + } > > + if (host->ddr_enabled) { > > + value = readl(host->base + SPMMC_SD_CONFIG0_REG); > > + value = bitfield_replace(value, 1, 1, 1); /* sdddrmode */ > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > + } else { > > + value = readl(host->base + SPMMC_SD_CONFIG0_REG); > > + value = bitfield_replace(value, 1, 1, 0); > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > + } > > +} > > + > > +static void spmmc_set_bus_width(struct spmmc_host *host, int width) > > +{ > > + u32 value = readl(host->base + SPMMC_SD_CONFIG0_REG); > > + int bus_width; > > + > > + switch (width) { > > + case MMC_BUS_WIDTH_8: > > + value = bitfield_replace(value, 11, 1, 0); > > + value = bitfield_replace(value, 18, 1, 1); > > + bus_width = 8; > > + break; > > + case MMC_BUS_WIDTH_4: > > + value = bitfield_replace(value, 11, 1, 1); > > + value = bitfield_replace(value, 18, 1, 0); > > + bus_width = 4; > > + break; > > + default: > > + value = bitfield_replace(value, 11, 1, 0); > > + value = bitfield_replace(value, 18, 1, 0); > > + bus_width = 1; > > + break; > > + }; > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > +} > > + > > +/** > > + * select the working mode of controller: sd/sdio/emmc > > + */ > > +static void spmmc_select_mode(struct spmmc_host *host, int mode) > > +{ > > + u32 value = readl(host->base + SPMMC_SD_CONFIG0_REG); > > + > > + host->mode = mode; > > + /* set `sdmmcmode', as it will sample data at fall edge */ > > + /* of SD bus clock if `sdmmcmode' is not set when */ > > + /* `sd_high_speed_en' is not set, which is not compliant */ > > + /* with SD specification */ > > + value = bitfield_replace(value, 10, 1, 1); > > + switch (mode) { > > + case SPMMC_MODE_EMMC: > > + value = bitfield_replace(value, 9, 1, 0); > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > + break; > > + case SPMMC_MODE_SDIO: > > + value = bitfield_replace(value, 9, 1, 1); > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > + value = readl(host->base + SPMMC_SDIO_CTRL_REG); > > + value = bitfield_replace(value, 6, 1, 1); /* int_multi_trig > */ > > + writel(value, host->base + SPMMC_SDIO_CTRL_REG); > > + break; > > + case SPMMC_MODE_SD: > > + default: > > + value = bitfield_replace(value, 9, 1, 0); > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > + break; > > + } > > +} > > + > > +static void spmmc_sw_reset(struct spmmc_host *host) > > +{ > > + u32 value; > > + > > + /* Must reset dma operation first, or it will*/ > > + /* be stuck on sd_state == 0x1c00 because of*/ > > + /* a controller software reset bug */ > > + value = readl(host->base + SPMMC_HW_DMA_CTRL_REG); > > + value = bitfield_replace(value, 10, 1, 1); > > + writel(value, host->base + SPMMC_HW_DMA_CTRL_REG); > > + value = bitfield_replace(value, 10, 1, 0); > > + writel(value, host->base + SPMMC_HW_DMA_CTRL_REG); > > + value = readl(host->base + SPMMC_HW_DMA_CTRL_REG); > > + value = bitfield_replace(value, 9, 1, 1); > > + writel(value, host->base + SPMMC_HW_DMA_CTRL_REG); > > + writel(0x7, host->base + SPMMC_SD_RST_REG); > > + while (readl(host->base + SPMMC_SD_HW_STATE_REG) & BIT(6)) > > + ; > > +} > > + > > +static void spmmc_prepare_cmd(struct spmmc_host *host, struct > mmc_command *cmd) > > +{ > > + u32 value; > > + > > + /* add start bit, according to spec, command format */ > > + value = ((cmd->opcode | 0x40) << 24) | (cmd->arg >> 8); > > + writel(value, host->base + SPMMC_SD_CMDBUF0_3_REG); > > + writeb(cmd->arg & 0xff, host->base + > SPMMC_SD_CMDBUF4_REG); > > + > > + /* disable interrupt if needed */ > > + value = readl(host->base + SPMMC_SD_INT_REG); > > + value = bitfield_replace(value, 2, 1, 1); /* sd_cmp_clr */ > > + if (likely(!host->use_int || cmd->flags & MMC_RSP_136)) > > + value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */ > > + else > > + value = bitfield_replace(value, 0, 1, 1); > > + writel(value, host->base + SPMMC_SD_INT_REG); > > + > > + value = readl(host->base + SPMMC_SD_CONFIG0_REG); > > + value = bitfield_replace(value, 4, 2, 0); /* sd_trans_mode */ > > + value = bitfield_replace(value, 7, 1, 1); /* sdcmddummy */ > > + if (likely(cmd->flags & MMC_RSP_PRESENT)) { > > + value = bitfield_replace(value, 6, 1, 1); /* sdautorsp */ > > + } else { > > + value = bitfield_replace(value, 6, 1, 0); > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > + return; > > + } > > + /* > > + * Currently, host is not capable of checking R2's CRC7, > > + * thus, enable crc7 check only for 48 bit response commands > > + */ > > + if (likely(cmd->flags & MMC_RSP_CRC && !(cmd->flags & > MMC_RSP_136))) > > + value = bitfield_replace(value, 8, 1, 1); /* sdrspchk_en */ > > + else > > + value = bitfield_replace(value, 8, 1, 0); > > + > > + if (unlikely(cmd->flags & MMC_RSP_136)) > > + value = bitfield_replace(value, 15, 1, 1); /* sdrsptype */ > > + else > > + value = bitfield_replace(value, 15, 1, 0); > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > +} > > + > > +static void spmmc_prepare_data(struct spmmc_host *host, struct > mmc_data *data) > > +{ > > + u32 value, srcdst; > > + //struct mmc_command *cmd = data->mrq->cmd; > > + > > + writel(data->blocks - 1, host->base + > SPMMC_SD_PAGE_NUM_REG); > > + writel(data->blksz - 1, host->base + SPMMC_SD_BLOCKSIZE_REG); > > + value = readl(host->base + SPMMC_SD_CONFIG0_REG); > > + if (data->flags & MMC_DATA_READ) { > > + value = bitfield_replace(value, 4, 2, 2); /* sd_trans_mode > */ > > + value = bitfield_replace(value, 6, 1, 0); /* sdautorsp */ > > + value = bitfield_replace(value, 7, 1, 0); /* sdcmddummy > */ > > + srcdst = readl(host->base + > SPMMC_CARD_MEDIATYPE_SRCDST_REG); > > + srcdst = bitfield_replace(srcdst, 4, 7, 0x12); > > + writel(srcdst, host->base + > SPMMC_CARD_MEDIATYPE_SRCDST_REG); > > + } else { > > + value = bitfield_replace(value, 4, 2, 1); > > + srcdst = readl(host->base + > SPMMC_CARD_MEDIATYPE_SRCDST_REG); > > + srcdst = bitfield_replace(srcdst, 4, 7, 0x21); > > + writel(srcdst, host->base + > SPMMC_CARD_MEDIATYPE_SRCDST_REG); > > + } > > + value = bitfield_replace(value, 2, 1, 1); > > + if (likely(host->dmapio_mode == SPMMC_DMA_MODE)) { > > + struct scatterlist *sg; > > + dma_addr_t dma_addr; > > + unsigned int dma_size; > > + u32 *reg_addr; > > + int dma_direction = data->flags & MMC_DATA_READ ? > DMA_FROM_DEVICE : DMA_TO_DEVICE; > > + int i, count = 1; > > + > > + count = dma_map_sg(host->mmc->parent, data->sg, > data->sg_len, dma_direction); > > + if (unlikely(!count || count > > SPMMC_MAX_DMA_MEMORY_SECTORS)) { > > + data->error = -EINVAL; > > + return; > > + } > > + for_each_sg(data->sg, sg, count, i) { > > + dma_addr = sg_dma_address(sg); > > + dma_size = sg_dma_len(sg) / 512 - 1; > > + if (i == 0) { > > + writel(dma_addr, host->base + > SPMMC_DMA_BASE_ADDR_REG); > > + writel(dma_size, host->base + > SPMMC_SDRAM_SECTOR_0_SIZE_REG); > > + } else { > > + reg_addr = host->base + > SPMMC_SDRAM_SECTOR_1_ADDR_REG + (i - 1) * 2; > > + writel(dma_addr, reg_addr); > > + writel(dma_size, reg_addr + 1); > > + } > > + } > > + value = bitfield_replace(value, 0, 1, 0); /* sdpiomode */ > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > + /* enable interrupt if needed */ > > + if (!host->use_int && data->blksz * data->blocks > > host->dma_int_threshold) { > > + host->dma_use_int = 1; > > + value = readl(host->base + > SPMMC_SD_INT_REG); > > + value = bitfield_replace(value, 0, 1, 1); /* > sdcmpen */ > > + writel(value, host->base + > SPMMC_SD_INT_REG); > > + } > > + } else { > > + value = bitfield_replace(value, 0, 1, 1); > > + value = bitfield_replace(value, 14, 1, 1); /* rx4_en */ > > + writel(value, host->base + SPMMC_SD_CONFIG0_REG); > > + } > > +} > > + > > +static inline void spmmc_trigger_transaction(struct spmmc_host *host) > > +{ > > + u32 value = readl(host->base + SPMMC_SD_CTRL_REG); > > + > > + value = bitfield_replace(value, 0, 1, 1); /* trigger transaction */ > > + writel(value, host->base + SPMMC_SD_CTRL_REG); > > +} > > + > > +static void __send_stop_cmd(struct spmmc_host *host) > > +{ > > + struct mmc_command stop = {}; > > + u32 value; > > + > > + stop.opcode = MMC_STOP_TRANSMISSION; > > + stop.arg = 0; > > + stop.flags = MMC_RSP_R1B; > > + spmmc_prepare_cmd(host, &stop); > > + value = readl(host->base + SPMMC_SD_INT_REG); > > + value = bitfield_replace(value, 0, 1, 0); /* sdcmpen */ > > + writel(value, host->base + SPMMC_SD_INT_REG); > > + spmmc_trigger_transaction(host); > > + spmmc_wait_finish(host); > > +} > > + > > +/** > > + * check if error occurred during transaction. > > + * @host - host > > + * @mrq - the mrq > > + * @return 0 if no error otherwise the error number. > > + */ > > +static int spmmc_check_error(struct spmmc_host *host, struct > mmc_request *mrq) > > +{ > > + int ret = 0; > > + struct mmc_command *cmd = mrq->cmd; > > + struct mmc_data *data = mrq->data; > > + > > + u32 value = readl(host->base + SPMMC_SD_STATE_REG); > > + u32 crc_token = bitfield_extract(value, 4, 3); > > + > > + if (unlikely(value & SPMMC_SDSTATE_ERROR)) { > > + u32 timing_cfg0 = 0; > > + > > + value = readl(host->base + SPMMC_SD_STATUS_REG); > > + > > + if (host->tuning_info.enable_tuning) { > > + timing_cfg0 = readl(host->base + > SPMMC_SD_TIMING_CONFIG0_REG); > > + host->tuning_info.rd_crc_dly = > bitfield_extract(timing_cfg0, 20, 3); > > + host->tuning_info.rd_dat_dly = > bitfield_extract(timing_cfg0, 16, 3); > > + host->tuning_info.rd_rsp_dly = > bitfield_extract(timing_cfg0, 12, 3); > > + host->tuning_info.wr_cmd_dly = > bitfield_extract(timing_cfg0, 8, 3); > > + host->tuning_info.wr_dat_dly = > bitfield_extract(timing_cfg0, 4, 3); > > + } > > + > > + if (value & SPMMC_SDSTATUS_RSP_TIMEOUT) { > > + ret = -ETIMEDOUT; > > + host->tuning_info.wr_cmd_dly++; > > + } else if (value & SPMMC_SDSTATUS_RSP_CRC7_ERROR) > { > > + ret = -EILSEQ; > > + host->tuning_info.rd_rsp_dly++; > > + } else if (data) { > > + if ((value & SPMMC_SDSTATUS_STB_TIMEOUT)) > { > > + ret = -ETIMEDOUT; > > + host->tuning_info.rd_dat_dly++; > > + } else if (value & > SPMMC_SDSTATUS_RDATA_CRC16_ERROR) { > > + ret = -EILSEQ; > > + host->tuning_info.rd_dat_dly++; > > + } else if (value & > SPMMC_SDSTATUS_CARD_CRC_CHECK_TIMEOUT) { > > + ret = -ETIMEDOUT; > > + host->tuning_info.rd_crc_dly++; > > + } else if (value & > SPMMC_SDSTATUS_CRC_TOKEN_CHECK_ERROR) { > > + ret = -EILSEQ; > > + if (crc_token == 0x5) > > + > host->tuning_info.wr_dat_dly++; > > + else > > + > host->tuning_info.rd_crc_dly++; > > + } > > + } > > + cmd->error = ret; > > + if (data) { > > + data->error = ret; > > + data->bytes_xfered = 0; > > + } > > + if (!host->tuning_info.need_tuning && > host->tuning_info.enable_tuning) > > + cmd->retries = SPMMC_MAX_RETRIES; /* retry > it */ > > + spmmc_sw_reset(host); > > + mdelay(5); > > + > > + if (host->tuning_info.enable_tuning) { > > + timing_cfg0 = bitfield_replace(timing_cfg0, 20, > 3, > > + > host->tuning_info.rd_crc_dly); > > + timing_cfg0 = bitfield_replace(timing_cfg0, 16, > 3, > > + > host->tuning_info.rd_dat_dly); > > + timing_cfg0 = bitfield_replace(timing_cfg0, 12, > 3, > > + > host->tuning_info.rd_rsp_dly); > > + timing_cfg0 = bitfield_replace(timing_cfg0, 8, > 3, > > + > host->tuning_info.wr_cmd_dly); > > + timing_cfg0 = bitfield_replace(timing_cfg0, 4, > 3, > > + > host->tuning_info.wr_dat_dly); > > + writel(timing_cfg0, host->base + > SPMMC_SD_TIMING_CONFIG0_REG); > > + } > > + } else if (data) { > > + data->error = 0; > > + data->bytes_xfered = data->blocks * data->blksz; > > + } > > + host->tuning_info.need_tuning = ret; > > + /* controller will not send cmd 12 automatically if error occurred */ > > + if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || > > + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) { > > + __send_stop_cmd(host); > > + spmmc_sw_reset(host); > > + } > > + return ret; > > +} > > + > > +/** > > + * the strategy is: > > + * 1. if several continuous delays are acceptable, we choose a middle one; > > + * 2. otherwise, we choose the first one. > > + */ > > +static inline int __find_best_delay(u8 candidate_dly) > > +{ > > + int f, w; > > + > > + if (!candidate_dly) > > + return 0; > > + f = ffs(candidate_dly) - 1; > > + w = hweight8(candidate_dly); > > + if (0xff == (bitfield_mask(f, w) & ~candidate_dly)) > > + return (f + w / 2); > > + else > > + return (f); > > +} > > + > > +static inline __maybe_unused void spmmc_txdummy(struct spmmc_host > *host, int count) > > +{ > > + u32 value; > > + > > + count &= 0x1ff; > > + value = readl(host->base + SPMMC_SD_CONFIG1_REG); > > + value = bitfield_replace(value, 0, 9, count); > > + writel(value, host->base + SPMMC_SD_CONFIG1_REG); > > + value = readl(host->base + SPMMC_SD_CTRL_REG); > > + value = bitfield_replace(value, 1, 1, 1); /* trigger tx dummy */ > > + writel(value, host->base + SPMMC_SD_CTRL_REG); > > +} > > + > > +static void spmmc_xfer_data_pio(struct spmmc_host *host, struct > mmc_data *data) > > +{ > > + u32 *buf; /* tx/rx 4 bytes one time in pio mode */ > > + int data_left = data->blocks * data->blksz; > > + int consumed, remain; > > + > > + struct sg_mapping_iter *sg_miter = &host->sg_miter; > > + unsigned int flags = 0; > > + > > + if (data->flags & MMC_DATA_WRITE) > > + flags |= SG_MITER_FROM_SG; > > + else > > + flags |= SG_MITER_TO_SG; > > + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); > > + while (data_left > 0) { > > + consumed = 0; > > + if (!sg_miter_next(sg_miter)) > > + break; > > + buf = sg_miter->addr; > > + remain = sg_miter->length; > > + do { > > + if (data->flags & MMC_DATA_WRITE) { > > + if (spmmc_wait_txbuf_empty(host)) > > + goto done; > > + writel(*buf, host->base + > SPMMC_SD_PIODATATX_REG); > > + } else { > > + if (spmmc_wait_rxbuf_full(host)) > > + goto done; > > + *buf = readl(host->base + > SPMMC_SD_PIODATARX_REG); > > + } > > + buf++; > > + consumed += 4; > > + remain -= 4; > > + } while (remain); > > + sg_miter->consumed = consumed; > > + data_left -= consumed; > > + } > > +done: > > + sg_miter_stop(sg_miter); > > +} > > + > > +static void spmmc_controller_init(struct spmmc_host *host) > > +{ > > + u32 value; > > + int ret = reset_control_assert(host->rstc); > > + > > + if (!ret) { > > + mdelay(1); > > + ret = reset_control_deassert(host->rstc); > > + } > > + > > + value = readl(host->base + > SPMMC_CARD_MEDIATYPE_SRCDST_REG); > > + value = bitfield_replace(value, 0, 3, SPMMC_MEDIA_SD); > > + writel(value, host->base + > SPMMC_CARD_MEDIATYPE_SRCDST_REG); > > + host->signal_voltage = MMC_SIGNAL_VOLTAGE_330; > > +} > > + > > +static void spmmc_set_power_mode(struct spmmc_host *host, struct > mmc_ios *ios) > > +{ > > + if (host->power_state == ios->power_mode) > > + return; > > + > > + switch (ios->power_mode) { > > + /* power off->up->on */ > > + case MMC_POWER_ON: > > + spmmc_controller_init(host); > > + pm_runtime_get_sync(host->mmc->parent); > > + break; > > + case MMC_POWER_UP: > > + break; > > + case MMC_POWER_OFF: > > + pm_runtime_put(host->mmc->parent); > > + break; > > + } > > + host->power_state = ios->power_mode; > > +} > > + > > +/** > > + * 1. unmap scatterlist if needed; > > + * 2. get response & check error conditions; > > + * 3. unlock host->mrq_lock > > + * 4. notify mmc layer the request is done > > + */ > > +static void spmmc_finish_request(struct spmmc_host *host, struct > mmc_request *mrq) > > +{ > > + struct mmc_command *cmd; > > + struct mmc_data *data; > > + > > + if (!mrq) > > + return; > > + > > + cmd = mrq->cmd; > > + data = mrq->data; > > + > > + if (data && SPMMC_DMA_MODE == host->dmapio_mode) { > > + int dma_direction = data->flags & MMC_DATA_READ ? > DMA_FROM_DEVICE : DMA_TO_DEVICE; > > + > > + dma_unmap_sg(host->mmc->parent, data->sg, > data->sg_len, dma_direction); > > + host->dma_use_int = 0; > > + } > > + spmmc_get_rsp(host, cmd); > > + spmmc_check_error(host, mrq); > > + host->mrq = NULL; > > + mutex_unlock(&host->mrq_lock); > > + mmc_request_done(host->mmc, mrq); > > +} > > + > > +/* Interrupt Service Routine */ > > +irqreturn_t spmmc_irq(int irq, void *dev_id) > > +{ > > + struct spmmc_host *host = dev_id; > > + u32 value = readl(host->base + SPMMC_SD_INT_REG); > > + > > + spin_lock(&host->lock); > > + if ((value & SPMMC_SDINT_SDCMP) && (value & > SPMMC_SDINT_SDCMPEN)) { > > + value = bitfield_replace(value, 0, 1, 0); /* disable sdcmp > */ > > + value = bitfield_replace(value, 2, 1, 1); /* sd_cmp_clr */ > > + writel(value, host->base + SPMMC_SD_INT_REG); > > + /* if error occurred, we my need send cmd 12 to stop > data transaction,*/ > > + /* which is time consuming, so make use of tasklet to > handle this.*/ > > + if (unlikely(readl(host->base + SPMMC_SD_STATE_REG) > & SPMMC_SDSTATE_ERROR)) > > + tasklet_schedule(&host->tsklet_finish_req); > > + else > > + spmmc_finish_request(host, host->mrq); > > + } > > + if (value & SPMMC_SDINT_SDIO && > > + (value & SPMMC_SDINT_SDIOEN)) { > > + mmc_signal_sdio_irq(host->mmc); > > + } > > + spin_unlock(&host->lock); > > + return IRQ_HANDLED; > > +} > > + > > +static void spmmc_request(struct mmc_host *mmc, struct mmc_request > *mrq) > > +{ > > + struct spmmc_host *host = mmc_priv(mmc); > > + struct mmc_data *data; > > + struct mmc_command *cmd; > > + int ret; > > + > > + ret = mutex_lock_interruptible(&host->mrq_lock); > > + if (ret) > > + return; > > + > > + host->mrq = mrq; > > + data = mrq->data; > > + cmd = mrq->cmd; > > + > > + spmmc_prepare_cmd(host, cmd); > > + /* we need manually read response R2. */ > > + if (unlikely(cmd->flags & MMC_RSP_136)) { > > + spmmc_trigger_transaction(host); > > + spmmc_get_rsp(host, cmd); > > + spmmc_wait_finish(host); > > + spmmc_check_error(host, mrq); > > + host->mrq = NULL; > > + mutex_unlock(&host->mrq_lock); > > + mmc_request_done(host->mmc, mrq); > > + } else { > > + if (data) > > + spmmc_prepare_data(host, data); > > + > > + if (unlikely(host->dmapio_mode == SPMMC_PIO_MODE > && data)) { > > + u32 value; > > + /* pio data transfer do not use interrupt */ > > + value = readl(host->base + > SPMMC_SD_INT_REG); > > + value = bitfield_replace(value, 0, 1, 0); /* > sdcmpen */ > > + writel(value, host->base + > SPMMC_SD_INT_REG); > > + spmmc_trigger_transaction(host); > > + spmmc_xfer_data_pio(host, data); > > + spmmc_wait_finish(host); > > + spmmc_finish_request(host, mrq); > > + } else { > > + if (!(host->use_int || host->dma_use_int)) { > > + spmmc_trigger_transaction(host); > > + spmmc_wait_finish(host); > > + spmmc_finish_request(host, mrq); > > + } else { > > + spmmc_trigger_transaction(host); > > + } > > + } > > + } > > +} > > + > > +static void spmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > +{ > > + struct spmmc_host *host = (struct spmmc_host *)mmc_priv(mmc); > > + > > + mutex_lock(&host->mrq_lock); > > + spmmc_set_power_mode(host, ios); > > + spmmc_set_bus_clk(host, ios->clock); > > + spmmc_set_bus_timing(host, ios->timing); > > + spmmc_set_bus_width(host, ios->bus_width); > > + /* ensure mode is correct, because we might have hw reset the > controller */ > > + spmmc_select_mode(host, host->mode); > > + mutex_unlock(&host->mrq_lock); > > + //return; > > +} > > + > > +/** > > + * Return values for the get_cd callback should be: > > + * 0 for a absent card > > + * 1 for a present card > > + * -ENOSYS when not supported (equal to NULL callback) > > + * or a negative errno value when something bad happened > > + */ > > +int spmmc_get_cd(struct mmc_host *mmc) > > +{ > > + int ret = 0; > > + > > + if (mmc_can_gpio_cd(mmc)) > > + ret = mmc_gpio_get_cd(mmc); > > + > > + if (ret < 0) > > + ret = 0; > > + > > + return ret; > > +} > > + > > +static int spmmc_execute_tuning(struct mmc_host *mmc, u32 opcode) > > +{ > > + struct spmmc_host *host = mmc_priv(mmc); > > + const u8 *blk_pattern; > > + u8 *blk_test; > > + int blksz; > > + u8 smpl_dly = 0, candidate_dly = 0; > > + u32 value; > > + > > + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) { > > + blk_pattern = tuning_blk_pattern_8bit; > > + blksz = sizeof(tuning_blk_pattern_8bit); > > + } else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) { > > + blk_pattern = tuning_blk_pattern_4bit; > > + blksz = sizeof(tuning_blk_pattern_4bit); > > + } else { > > + return -EINVAL; > > + } > > + > > + blk_test = kmalloc(blksz, GFP_KERNEL); > > + if (!blk_test) > > + return -ENOMEM; > > + > > + host->tuning_info.enable_tuning = 0; > > + do { > > + struct mmc_request mrq = {NULL}; > > + struct mmc_command cmd = {0}; > > + struct mmc_command stop = {0}; > > + struct mmc_data data = {0}; > > + struct scatterlist sg; > > + > > + cmd.opcode = opcode; > > + cmd.arg = 0; > > + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; > > + > > + stop.opcode = MMC_STOP_TRANSMISSION; > > + stop.arg = 0; > > + stop.flags = MMC_RSP_R1B | MMC_CMD_AC; > > + > > + data.blksz = blksz; > > + data.blocks = 1; > > + data.flags = MMC_DATA_READ; > > + data.sg = &sg; > > + data.sg_len = 1; > > + > > + sg_init_one(&sg, blk_test, blksz); > > + mrq.cmd = &cmd; > > + mrq.stop = &stop; > > + mrq.data = &data; > > + host->mrq = &mrq; > > + > > + value = readl(host->base + > SPMMC_SD_TIMING_CONFIG0_REG); > > + value = bitfield_replace(value, 12, 3, smpl_dly); /* > sd_rd_rsp_dly_sel */ > > + value = bitfield_replace(value, 16, 3, smpl_dly); /* > sd_rd_dat_dly_sel */ > > + value = bitfield_replace(value, 20, 3, smpl_dly); /* > sd_rd_crc_dly_sel */ > > + writel(value, host->base + > SPMMC_SD_TIMING_CONFIG0_REG); > > + > > + mmc_wait_for_req(mmc, &mrq); > > + if (!cmd.error && !data.error) { > > + if (!memcmp(blk_pattern, blk_test, blksz)) > > + candidate_dly |= (1 << smpl_dly); > > + } > > + } while (smpl_dly++ <= SPMMC_MAX_TUNABLE_DLY); > > + host->tuning_info.enable_tuning = 1; > > + > > + if (candidate_dly) { > > + smpl_dly = __find_best_delay(candidate_dly); > > + value = readl(host->base + > SPMMC_SD_TIMING_CONFIG0_REG); > > + value = bitfield_replace(value, 12, 3, smpl_dly); /* > sd_rd_rsp_dly_sel */ > > + value = bitfield_replace(value, 16, 3, smpl_dly); /* > sd_rd_dat_dly_sel */ > > + value = bitfield_replace(value, 20, 3, smpl_dly); /* > sd_rd_crc_dly_sel */ > > + writel(value, host->base + > SPMMC_SD_TIMING_CONFIG0_REG); > > + return 0; > > + } > > + return -EIO; > > +} > > + > > +static void spmmc_enable_sdio_irq(struct mmc_host *mmc, int enable) > > +{ > > + struct spmmc_host *host = mmc_priv(mmc); > > + u32 value = readl(host->base + SPMMC_SD_INT_REG); > > + > > + value = bitfield_replace(value, 5, 1, 1); /* sdio_int_clr */ > > + if (enable) > > + value = bitfield_replace(value, 3, 1, 1); > > + else > > + value = bitfield_replace(value, 3, 1, 0); > > + writel(value, host->base + SPMMC_SD_INT_REG); > > +} > > + > > +static const struct mmc_host_ops spmmc_ops = { > > + .request = spmmc_request, > > + .set_ios = spmmc_set_ios, > > + .get_cd = spmmc_get_cd, > > + .execute_tuning = spmmc_execute_tuning, > > + .enable_sdio_irq = spmmc_enable_sdio_irq, > > +}; > > + > > +static void tsklet_func_finish_req(unsigned long data) > > +{ > > + struct spmmc_host *host = (struct spmmc_host *)data; > > + > > + spin_lock(&host->lock); > > + spmmc_finish_request(host, host->mrq); > > + spin_unlock(&host->lock); > > +} > > + > > +static int spmmc_drv_probe(struct platform_device *pdev) > > +{ > > + int ret = 0; > > + struct mmc_host *mmc; > > + struct resource *res; > > + struct spmmc_host *host; > > + unsigned int mode; > > + > > + mmc = mmc_alloc_host(sizeof(*host), &pdev->dev); > > + if (!mmc) { > > + ret = -ENOMEM; > > + goto probe_free_host; > > + } > > + > > + host = mmc_priv(mmc); > > + host->mmc = mmc; > > + host->power_state = MMC_POWER_OFF; > > + host->dma_int_threshold = 1024; > > + host->dmapio_mode = SPMMC_DMA_MODE; > > + > > + host->base = devm_platform_get_and_ioremap_resource(pdev, 0, > &res); > > + if (IS_ERR(host->base)) > > + return PTR_ERR(host->base); > > + > > + host->clk = devm_clk_get(&pdev->dev, NULL); > > + if (IS_ERR(host->clk)) { > > + dev_err(&pdev->dev, "Can not find clock source\n"); > > + ret = PTR_ERR(host->clk); > > + goto probe_free_host; > > + } > > + > > + host->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); > > + if (IS_ERR(host->rstc)) { > > + dev_err(&pdev->dev, "Can not find reset controller\n"); > > + ret = PTR_ERR(host->rstc); > > + goto probe_free_host; > > + } > > + > > + host->irq = platform_get_irq(pdev, 0); > > + if (host->irq <= 0) { > > + dev_err(&pdev->dev, "get sd irq resource fail\n"); > > + ret = -EINVAL; > > + goto probe_free_host; > > + } > > + if (devm_request_irq(&pdev->dev, host->irq, spmmc_irq, > IRQF_SHARED, > > + dev_name(&pdev->dev), host)) { > > + dev_err(&pdev->dev, "Failed to request sd card > interrupt.\n"); > > + ret = -ENOENT; > > + goto probe_free_host; > > + } > > + > > + ret = mmc_of_parse(mmc); > > + if (ret) > > + goto probe_free_host; > > + > > + ret = clk_prepare(host->clk); > > + if (ret) > > + goto probe_free_host; > > + ret = clk_enable(host->clk); > > + if (ret) > > + goto probe_clk_unprepare; > > + > > + spin_lock_init(&host->lock); > > + mutex_init(&host->mrq_lock); > > + tasklet_init(&host->tsklet_finish_req, tsklet_func_finish_req, > (unsigned long)host); > > + mmc->ops = &spmmc_ops; > > + mmc->f_min = SPMMC_MIN_CLK; > > + if (mmc->f_max > SPMMC_MAX_CLK) > > + mmc->f_max = SPMMC_MAX_CLK; > > + > > + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; > > + mmc->max_seg_size = SPMMC_MAX_BLK_COUNT * 512; > > + /* Host controller supports up to > "SPMMC_MAX_DMA_MEMORY_SECTORS"*/ > > + /* a.k.a. max scattered memory segments per request*/ > > + mmc->max_segs = SPMMC_MAX_DMA_MEMORY_SECTORS; > > + mmc->max_req_size = SPMMC_MAX_BLK_COUNT * 512; > > + /* Limited by the max value of dma_size & data_length, set it to > 512 bytes for now */ > > + mmc->max_blk_size = 512; > > + mmc->max_blk_count = SPMMC_MAX_BLK_COUNT; /* Limited by > sd_page_num */ > > + > > + dev_set_drvdata(&pdev->dev, host); > > + spmmc_controller_init(host); > > + mode = (int)of_device_get_match_data(&pdev->dev); > > + spmmc_select_mode(host, mode); > > + mmc_add_host(mmc); > > + host->tuning_info.enable_tuning = 1; > > + pm_runtime_set_active(&pdev->dev); > > + pm_runtime_enable(&pdev->dev); > > + > > + return 0; > > + > > +probe_clk_unprepare: > > + dev_err(&pdev->dev, "unable to enable controller clock\n"); > > + clk_unprepare(host->clk); > > +probe_free_host: > > + if (mmc) > > + mmc_free_host(mmc); > > + > > + return ret; > > +} > > + > > +static int spmmc_drv_remove(struct platform_device *dev) > > +{ > > + struct spmmc_host *host = platform_get_drvdata(dev); > > + > > + mmc_remove_host(host->mmc); > > + clk_disable(host->clk); > > + clk_unprepare(host->clk); > > + pm_runtime_disable(&dev->dev); > > + platform_set_drvdata(dev, NULL); > > + mmc_free_host(host->mmc); > > + return 0; > > +} > > + > > +static int spmmc_drv_suspend(struct platform_device *dev, pm_message_t > state) > > +{ > > + struct spmmc_host *host; > > + > > + host = platform_get_drvdata(dev); > > + mutex_lock(&host->mrq_lock); /* Make sure that no one is holding > the controller */ > > + mutex_unlock(&host->mrq_lock); > > + clk_disable(host->clk); > > + return 0; > > +} > > + > > +static int spmmc_drv_resume(struct platform_device *dev) > > +{ > > + struct spmmc_host *host; > > + > > + host = platform_get_drvdata(dev); > > + return clk_enable(host->clk); > > +} > > + > > +#ifdef CONFIG_PM > > +#ifdef CONFIG_PM_SLEEP > > +static int spmmc_pm_suspend(struct device *dev) > > +{ > > + pm_runtime_force_suspend(dev); > > + return 0; > > +} > > + > > +static int spmmc_pm_resume(struct device *dev) > > +{ > > + pm_runtime_force_resume(dev); > > + return 0; > > +} > > +#endif /* ifdef CONFIG_PM_SLEEP */ > > + > > +#ifdef CONFIG_PM_RUNTIME > > +static int spmmc_pm_runtime_suspend(struct device *dev) > > +{ > > + struct spmmc_host *host; > > + > > + host = dev_get_drvdata(dev); > > + clk_disable(host->clk); > > + return 0; > > +} > > + > > +static int spmmc_pm_runtime_resume(struct device *dev) > > +{ > > + struct spmmc_host *host; > > + > > + host = dev_get_drvdata(dev); > > + return clk_enable(host->clk); > > +} > > +#endif /* ifdef CONFIG_PM_RUNTIME */ > > + > > +static const struct dev_pm_ops spmmc_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(spmmc_pm_suspend, > spmmc_pm_resume) > > +#ifdef CONFIG_PM_RUNTIME > > + SET_RUNTIME_PM_OPS(spmmc_pm_runtime_suspend, > spmmc_pm_runtime_resume, NULL) > > +#endif > > +}; > > +#endif /* ifdef CONFIG_PM */ > > + > > +static const struct of_device_id spmmc_of_table[] = { > > + { > > + .compatible = "sunplus,sp7021-emmc", > > + .data = (void *)SPMMC_MODE_EMMC, > > + }, > > + {/* sentinel */} > > +}; > > +MODULE_DEVICE_TABLE(of, spmmc_of_table); > > + > > +static struct platform_driver spmmc_driver = { > > + .probe = spmmc_drv_probe, > > + .remove = spmmc_drv_remove, > > + .suspend = spmmc_drv_suspend, > > + .resume = spmmc_drv_resume, > > + .driver = { > > + .name = "spmmc", > > + .owner = THIS_MODULE, > > +#ifdef CONFIG_PM > > + .pm = &spmmc_pm_ops, > > +#endif > > + .of_match_table = spmmc_of_table, > > + }, > > +}; > > +module_platform_driver(spmmc_driver); > > + > > +MODULE_AUTHOR("Tony Huang <tonyhuang.sunplus@gmail.com>"); > > +MODULE_DESCRIPTION("Sunplus MMC controller driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.7.4 > > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-01-12 10:18 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-01-05 5:20 [PATCH v2 0/2] Add mmc driver for Sunplus SP7021 SOC Tony Huang 2022-01-05 5:20 ` [PATCH v2 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021 Tony Huang 2022-01-06 18:55 ` Rob Herring 2022-01-05 5:20 ` [PATCH v2 2/2] mmc: Add mmc driver " Tony Huang 2022-01-11 15:23 ` Ulf Hansson 2022-01-12 10:18 ` Tony Huang 黃懷厚
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).