linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: /dev/cpu/*/(cpuid, msr) unhappy as modules - OOPS!
       [not found] <1193.195.67.189.85.976703444.squirrel@www.zytor.com>
@ 2000-12-14 10:13 ` Chris Rankin
  2000-12-14 11:02 ` Chris Rankin
  2000-12-14 11:09 ` Chris Rankin
  2 siblings, 0 replies; 4+ messages in thread
From: Chris Rankin @ 2000-12-14 10:13 UTC (permalink / raw)
  To: H. Peter Anvin; +Cc: linux-kernel

Devfs might explain the 2.4.0-test12 oopses, but it can't possibly
explain the oops with 2.2.18. I don't use devfs with 2.2.18.

Chris
 
> Looks like a devfs problem; complain to the appropriate people.  I refuse 
> to touch that particular devfs code.
> 
> > I have just compiled Linux 2.2.18 (UP) and Linux 2.4.0-test12 (SMP,
> > devfs), and in each case I compiled the msr and cpuid drivers as
> > modules. However, when I tried to read from the devices (using "cat"),
> > I got oopses from both 2.2.18 and 2.4.0-test12. Neither the msr.o nor
> > the cpuid.o modules were loaded beforehand, as I was testing my kmod
> > setup. The oopses are below:

[2.4.0-test12 oopses removed]

> > Linux-2.2.18 (1 oops):
> > $ ksymoops -m /boot/System.map-2.2.18 < oops.txt 
> > ksymoops 2.3.4 on i586 2.2.18.  Options used
> >      -V (default)
> >      -k /proc/ksyms (default)
> >      -l /proc/modules (default)
> >      -o /lib/modules/2.2.18/ (default)
> >      -m /boot/System.map-2.2.18 (specified)
> > 
> > Warning (compare_maps): ksyms_base symbol module_list_R__ver_module_list 
> not found in System.map.  Ignoring ksyms_base entry
> > Dec 13 01:31:18 wellhouse kernel: Unable to handle kernel paging request 
> at virtual address c887027c
> > Dec 13 01:31:18 wellhouse kernel: current->tss.cr3 = 007ad000, %%cr3 = 
> 007ad000
> > Dec 13 01:31:18 wellhouse kernel: *pde = 01472063
> > Dec 13 01:31:18 wellhouse kernel: Oops: 0000
> > Dec 13 01:31:18 wellhouse kernel: CPU:    0
> > Dec 13 01:31:18 wellhouse kernel: EIP:    0010:[chrdev_open+56/88]
> > Dec 13 01:31:18 wellhouse kernel: EFLAGS: 00010286
> > Dec 13 01:31:18 wellhouse kernel: eax: c8870260   ebx: ffffffed   ecx: 
> 00000000   edx: 000000cb
> > Dec 13 01:31:18 wellhouse kernel: esi: c34d4380   edi: c0565e60   ebp: 
> c3c35900   esp: c3b47f4c
> > Dec 13 01:31:18 wellhouse kernel: ds: 0018   es: 0018   ss: 0018
> > Dec 13 01:31:18 wellhouse kernel: Process cat (pid: 1645, process nr: 53, 
> stackpage=c3b47000)
> > Dec 13 01:31:18 wellhouse kernel: Stack: c0565e60 00008000 00000003 
> 400e88b3 bffffa4c c012497c c0565e60 c34d4380 
> > Dec 13 01:31:18 wellhouse kernel:        00000000 c01248d5 00000003 
> c05a3000 400e88b3 bffffa4c 00000000 c398549c 
> > Dec 13 01:31:18 wellhouse kernel:        00000400 c0124b6f c05a3000 
> 00008000 00000000 c0124b56 c3b46000 40013ed0 
> > Dec 13 01:31:18 wellhouse kernel: Call Trace: [filp_open+184/264] 
> [filp_open+17/264] [sys_open+63/160] [sys_open+38/160] [error_code+45/64] [
> > system_call+52/64] 
> > Dec 13 01:31:18 wellhouse kernel: Code: 8b 40 1c 31 db 85 c0 74 0c 83 c4 
> f8 56 57 ff d0 89 c3 83 c4 
> > Using defaults from ksymoops -t elf32-i386 -a i386
> > 
> > Code;  00000000 Before first symbol
> > 00000000 <_EIP>:
> > Code;  00000000 Before first symbol
> >    0:   8b 40 1c                  mov    0x1c(%eax),%eax
> > Code;  00000003 Before first symbol
> >    3:   31 db                     xor    %ebx,%ebx
> > Code;  00000005 Before first symbol
> >    5:   85 c0                     test   %eax,%eax
> > Code;  00000007 Before first symbol
> >    7:   74 0c                     je     15 <_EIP+0x15> 00000015 Before 
> first symbol
> > Code;  00000009 Before first symbol
> >    9:   83 c4 f8                  add    $0xfffffff8,%esp
> > Code;  0000000c Before first symbol
> >    c:   56                        push   %esi
> > Code;  0000000d Before first symbol
> >    d:   57                        push   %edi
> > Code;  0000000e Before first symbol
> >    e:   ff d0                     call   *%eax
> > Code;  00000010 Before first symbol
> >   10:   89 c3                     mov    %eax,%ebx
> > Code;  00000012 Before first symbol
> >   12:   83 c4 00                  add    $0x0,%esp
> > 
> > 
> > 1 warning issued.  Results may not be reliable.
> > 
> > I know they're not exactly show-stoppers, but here they are anyway.
> > Cheers,
> > Chris
> > 
> 
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: /dev/cpu/*/(cpuid, msr) unhappy as modules - OOPS!
       [not found] <1193.195.67.189.85.976703444.squirrel@www.zytor.com>
  2000-12-14 10:13 ` /dev/cpu/*/(cpuid, msr) unhappy as modules - OOPS! Chris Rankin
@ 2000-12-14 11:02 ` Chris Rankin
  2000-12-14 11:09 ` Chris Rankin
  2 siblings, 0 replies; 4+ messages in thread
From: Chris Rankin @ 2000-12-14 11:02 UTC (permalink / raw)
  To: H. Peter Anvin; +Cc: linux-kernel

> Looks like a devfs problem; complain to the appropriate people.  I refuse 
> to touch that particular devfs code.

I've had a quick look at both the 2.2.18 and 2.4.0-test12 drivers for
msr and cpuid, and I've noticed something curious.

This is the comment from 2.4.0-test12, cpuid.c:

/*
 * cpuid.c
 *
 * x86 CPUID access device
 *
 * This device is accessed by lseek() to the appropriate CPUID level
 * and then read in chunks of 16 bytes.  A larger size means multiple
 * reads of consecutive levels.
 *
 * This driver uses /dev/cpu/%d/cpuid where %d is the minor number, and on
 * an SMP box will direct the access to CPU %d.
 */

And this is the initialisation function:

int __init cpuid_init(void)
{
  if (register_chrdev(CPUID_MAJOR, "cpu/cpuid", &cpuid_fops)) {
    printk(KERN_ERR "cpuid: unable to get major %d for cpuid\n",
     CPUID_MAJOR);
    return -EBUSY;
  }

  return 0;
}

These two are inconsistent! I had dutifully created a /dev/cpu/0
directory on my 2.2.18 and 2.4.0-test12 boxes, and had placed cpuid
device nodes inside them. (The 2.4.0-test12 box is SMP, and so I also
created a /dev/cpu/1 directory there too.) However, the driver expects
the device node to be /dev/cpu/cpuid. The msr driver has the same
problem.

Both the cpuid and the msr modules successfully loaded on 2.2.18 when
I tried to cat /dev/cpu/cpuid and /dev/cpu/msr. (Although they both
remained flagged as (unused), which I found strange considering the
amount of output I got.)

Cheers,
Chris



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: /dev/cpu/*/(cpuid, msr) unhappy as modules - OOPS!
       [not found] <1193.195.67.189.85.976703444.squirrel@www.zytor.com>
  2000-12-14 10:13 ` /dev/cpu/*/(cpuid, msr) unhappy as modules - OOPS! Chris Rankin
  2000-12-14 11:02 ` Chris Rankin
@ 2000-12-14 11:09 ` Chris Rankin
  2 siblings, 0 replies; 4+ messages in thread
From: Chris Rankin @ 2000-12-14 11:09 UTC (permalink / raw)
  To: H. Peter Anvin; +Cc: linux-kernel

OK, I've just tried repeating this experiment on 2.2.18 (no devfs) and
it oopsed this time, so there's obviously something else going on
here.

$ ksymoops -m /boot/System.map-2.2.18 < oops2.txt 
ksymoops 2.3.4 on i586 2.2.18.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.2.18/ (default)
     -m /boot/System.map-2.2.18 (specified)

Warning (compare_maps): ksyms_base symbol module_list_R__ver_module_list not found in System.map.  Ignoring ksyms_base entry
Dec 14 22:03:53 wellhouse kernel: Unable to handle kernel paging request at virtual address c888a27c
Dec 14 22:03:53 wellhouse kernel: current->tss.cr3 = 03003000, %%cr3 = 03003000
Dec 14 22:03:53 wellhouse kernel: *pde = 013f2063
Dec 14 22:03:53 wellhouse kernel: Oops: 0000
Dec 14 22:03:53 wellhouse kernel: CPU:    0
Dec 14 22:03:53 wellhouse kernel: EIP:    0010:[chrdev_open+56/88]
Dec 14 22:03:53 wellhouse kernel: EFLAGS: 00010286
Dec 14 22:03:53 wellhouse kernel: eax: c888a260   ebx: ffffffed   ecx: 00000000   edx: 000000cb
Dec 14 22:03:53 wellhouse kernel: esi: c25ba8c0   edi: c18c2288   ebp: c3c50ca0   esp: c0ef9f4c
Dec 14 22:03:53 wellhouse kernel: ds: 0018   es: 0018   ss: 0018
Dec 14 22:03:53 wellhouse kernel: Process cat (pid: 7021, process nr: 61, stackpage=c0ef9000)
Dec 14 22:03:53 wellhouse kernel: Stack: c18c2288 00008000 00000003 400e88b3 bffffa6c c012497c c18c2288 c25ba8c0 
Dec 14 22:03:53 wellhouse kernel:        00000000 c01248d5 00000003 c398a000 400e88b3 bffffa6c 00000000 c16b427c 
Dec 14 22:03:53 wellhouse kernel:        00000400 c0124b6f c398a000 00008000 00000000 c0124b56 c0ef8000 40013ed0 
Dec 14 22:03:53 wellhouse kernel: Call Trace: [filp_open+184/264] [filp_open+17/264] [sys_open+63/160] [sys_open+38/160] [error_code+45/64] [system_call+52/64] 
Dec 14 22:03:53 wellhouse kernel: Code: 8b 40 1c 31 db 85 c0 74 0c 83 c4 f8 56 57 ff d0 89 c3 83 c4 
Using defaults from ksymoops -t elf32-i386 -a i386

Code;  00000000 Before first symbol
00000000 <_EIP>:
Code;  00000000 Before first symbol
   0:   8b 40 1c                  mov    0x1c(%eax),%eax
Code;  00000003 Before first symbol
   3:   31 db                     xor    %ebx,%ebx
Code;  00000005 Before first symbol
   5:   85 c0                     test   %eax,%eax
Code;  00000007 Before first symbol
   7:   74 0c                     je     15 <_EIP+0x15> 00000015 Before first symbol
Code;  00000009 Before first symbol
   9:   83 c4 f8                  add    $0xfffffff8,%esp
Code;  0000000c Before first symbol
   c:   56                        push   %esi
Code;  0000000d Before first symbol
   d:   57                        push   %edi
Code;  0000000e Before first symbol
   e:   ff d0                     call   *%eax
Code;  00000010 Before first symbol
  10:   89 c3                     mov    %eax,%ebx
Code;  00000012 Before first symbol
  12:   83 c4 00                  add    $0x0,%esp


1 warning issued.  Results may not be reliable.

Chris
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 4+ messages in thread
* /dev/cpu/*/(cpuid, msr) unhappy as modules - OOPS!
@ 2000-12-12 21:16 Chris Rankin
  0 siblings, 0 replies; 4+ messages in thread
From: Chris Rankin @ 2000-12-12 21:16 UTC (permalink / raw)
  To: linux-kernel; +Cc: hpa

Hi,
I have just compiled Linux 2.2.18 (UP) and Linux 2.4.0-test12 (SMP,
devfs), and in each case I compiled the msr and cpuid drivers as
modules. However, when I tried to read from the devices (using "cat"),
I got oopses from both 2.2.18 and 2.4.0-test12. Neither the msr.o nor
the cpuid.o modules were loaded beforehand, as I was testing my kmod
setup. The oopses are below:

Linux-2.4.0-test12 (2 oopses):
$ ksymoops -m /boot/System.map-2.4.0-test12 < oops1.txt 
ksymoops 2.3.4 on i686 2.4.0-test12.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.4.0-test12/ (default)
     -m /boot/System.map-2.4.0-test12 (specified)

Dec 13 01:17:47 twopit kernel: Unable to handle kernel paging request at virtual address d084a540
Dec 13 01:17:47 twopit kernel: c0133d8a
Dec 13 01:17:47 twopit kernel: *pde = 0146b063
Dec 13 01:17:47 twopit kernel: Oops: 0000
Dec 13 01:17:47 twopit kernel: CPU:    1
Dec 13 01:17:47 twopit kernel: EIP:    0010:[get_chrfops+78/368]
Dec 13 01:17:47 twopit kernel: EFLAGS: 00010282
Dec 13 01:17:47 twopit kernel: eax: 00000650   ebx: d084a540   ecx: c0215280   edx: c0268de4
Dec 13 01:17:47 twopit kernel: esi: 00000000   edi: 00000650   ebp: 000000ca   esp: cb505ee8
Dec 13 01:17:47 twopit kernel: ds: 0018   es: 0018   ss: 0018
Dec 13 01:17:47 twopit kernel: Process cat (pid: 1681, stackpage=cb505000)
Dec 13 01:17:47 twopit kernel: Stack: cf41e140 cccfef60 ffffffed cb998580 c0215280 c02158b8 cbcd7840 00000000 
Dec 13 01:17:47 twopit kernel:        c013ed99 c999ca60 c013403a 000000ca 00000001 cf41e140 ffffffed cf41e144 
Dec 13 01:17:47 twopit kernel:        cb998580 c015b5d1 cb998580 cccfef60 cccfef60 cb998580 ffffffe9 c14fa240 
Dec 13 01:17:47 twopit kernel: Call Trace: [path_walk+1997/2196] [chrdev_open+38/172] [devfs_open+277/500] [dentry_open+189/332] [filp_open+82/92] [sys_open+60/240] [system_call+51/56] 
Dec 13 01:17:47 twopit kernel: Code: 8b 03 85 c0 74 10 50 e8 62 8b fe ff 83 c4 04 85 c0 74 09 8d 
Using defaults from ksymoops -t elf32-i386 -a i386

Code;  00000000 Before first symbol
00000000 <_EIP>:
Code;  00000000 Before first symbol
   0:   8b 03                     mov    (%ebx),%eax
Code;  00000002 Before first symbol
   2:   85 c0                     test   %eax,%eax
Code;  00000004 Before first symbol
   4:   74 10                     je     16 <_EIP+0x16> 00000016 Before first symbol
Code;  00000006 Before first symbol
   6:   50                        push   %eax
Code;  00000007 Before first symbol
   7:   e8 62 8b fe ff            call   fffe8b6e <_EIP+0xfffe8b6e> fffe8b6e <END_OF_CODE+2f726606/????>
Code;  0000000c Before first symbol
   c:   83 c4 04                  add    $0x4,%esp
Code;  0000000f Before first symbol
   f:   85 c0                     test   %eax,%eax
Code;  00000011 Before first symbol
  11:   74 09                     je     1c <_EIP+0x1c> 0000001c Before first symbol
Code;  00000013 Before first symbol
  13:   8d 00                     lea    (%eax),%eax

$ ksymoops -m /boot/System.map-2.4.0-test12 < oops2.txt 
ksymoops 2.3.4 on i686 2.4.0-test12.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.4.0-test12/ (default)
     -m /boot/System.map-2.4.0-test12 (specified)

Dec 13 01:20:02 twopit kernel: Unable to handle kernel paging request at virtual address d084a540
Dec 13 01:20:02 twopit kernel: c0133d8a
Dec 13 01:20:02 twopit kernel: *pde = 0146b063
Dec 13 01:20:02 twopit kernel: Oops: 0000
Dec 13 01:20:02 twopit kernel: CPU:    0
Dec 13 01:20:02 twopit kernel: EIP:    0010:[get_chrfops+78/368]
Dec 13 01:20:02 twopit kernel: EFLAGS: 00010282
Dec 13 01:20:02 twopit kernel: eax: 00000650   ebx: d084a540   ecx: c0215280   edx: c0268de4
Dec 13 01:20:02 twopit kernel: esi: 00000000   edi: 00000650   ebp: 000000ca   esp: cb52bee8
Dec 13 01:20:02 twopit kernel: ds: 0018   es: 0018   ss: 0018
Dec 13 01:20:02 twopit kernel: Process cat (pid: 1691, stackpage=cb52b000)
Dec 13 01:20:02 twopit kernel: Stack: cf41e140 cc605bc0 ffffffed cb998580 c0215280 c02158b8 cbcd7840 00000000 
Dec 13 01:20:02 twopit kernel:        c013ed99 c999ca60 c013403a 000000ca 00000001 cf41e140 ffffffed cf41e144 
Dec 13 01:20:02 twopit kernel:        cb998580 c015b5d1 cb998580 cc605bc0 cc605bc0 cb998580 ffffffe9 c14fa240 
Dec 13 01:20:02 twopit kernel: Call Trace: [path_walk+1997/2196] [chrdev_open+38/172] [devfs_open+277/500] [dentry_open+189/332] [filp_open+82/92] [sys_open+60/240] [system_call+51/56] 
Dec 13 01:20:02 twopit kernel: Code: 8b 03 85 c0 74 10 50 e8 62 8b fe ff 83 c4 04 85 c0 74 09 8d 
Using defaults from ksymoops -t elf32-i386 -a i386

Code;  00000000 Before first symbol
00000000 <_EIP>:
Code;  00000000 Before first symbol
   0:   8b 03                     mov    (%ebx),%eax
Code;  00000002 Before first symbol
   2:   85 c0                     test   %eax,%eax
Code;  00000004 Before first symbol
   4:   74 10                     je     16 <_EIP+0x16> 00000016 Before first symbol
Code;  00000006 Before first symbol
   6:   50                        push   %eax
Code;  00000007 Before first symbol
   7:   e8 62 8b fe ff            call   fffe8b6e <_EIP+0xfffe8b6e> fffe8b6e <END_OF_CODE+2f726606/????>
Code;  0000000c Before first symbol
   c:   83 c4 04                  add    $0x4,%esp
Code;  0000000f Before first symbol
   f:   85 c0                     test   %eax,%eax
Code;  00000011 Before first symbol
  11:   74 09                     je     1c <_EIP+0x1c> 0000001c Before first symbol
Code;  00000013 Before first symbol
  13:   8d 00                     lea    (%eax),%eax


Linux-2.2.18 (1 oops):
$ ksymoops -m /boot/System.map-2.2.18 < oops.txt 
ksymoops 2.3.4 on i586 2.2.18.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.2.18/ (default)
     -m /boot/System.map-2.2.18 (specified)

Warning (compare_maps): ksyms_base symbol module_list_R__ver_module_list not found in System.map.  Ignoring ksyms_base entry
Dec 13 01:31:18 wellhouse kernel: Unable to handle kernel paging request at virtual address c887027c
Dec 13 01:31:18 wellhouse kernel: current->tss.cr3 = 007ad000, %%cr3 = 007ad000
Dec 13 01:31:18 wellhouse kernel: *pde = 01472063
Dec 13 01:31:18 wellhouse kernel: Oops: 0000
Dec 13 01:31:18 wellhouse kernel: CPU:    0
Dec 13 01:31:18 wellhouse kernel: EIP:    0010:[chrdev_open+56/88]
Dec 13 01:31:18 wellhouse kernel: EFLAGS: 00010286
Dec 13 01:31:18 wellhouse kernel: eax: c8870260   ebx: ffffffed   ecx: 00000000   edx: 000000cb
Dec 13 01:31:18 wellhouse kernel: esi: c34d4380   edi: c0565e60   ebp: c3c35900   esp: c3b47f4c
Dec 13 01:31:18 wellhouse kernel: ds: 0018   es: 0018   ss: 0018
Dec 13 01:31:18 wellhouse kernel: Process cat (pid: 1645, process nr: 53, stackpage=c3b47000)
Dec 13 01:31:18 wellhouse kernel: Stack: c0565e60 00008000 00000003 400e88b3 bffffa4c c012497c c0565e60 c34d4380 
Dec 13 01:31:18 wellhouse kernel:        00000000 c01248d5 00000003 c05a3000 400e88b3 bffffa4c 00000000 c398549c 
Dec 13 01:31:18 wellhouse kernel:        00000400 c0124b6f c05a3000 00008000 00000000 c0124b56 c3b46000 40013ed0 
Dec 13 01:31:18 wellhouse kernel: Call Trace: [filp_open+184/264] [filp_open+17/264] [sys_open+63/160] [sys_open+38/160] [error_code+45/64] [
system_call+52/64] 
Dec 13 01:31:18 wellhouse kernel: Code: 8b 40 1c 31 db 85 c0 74 0c 83 c4 f8 56 57 ff d0 89 c3 83 c4 
Using defaults from ksymoops -t elf32-i386 -a i386

Code;  00000000 Before first symbol
00000000 <_EIP>:
Code;  00000000 Before first symbol
   0:   8b 40 1c                  mov    0x1c(%eax),%eax
Code;  00000003 Before first symbol
   3:   31 db                     xor    %ebx,%ebx
Code;  00000005 Before first symbol
   5:   85 c0                     test   %eax,%eax
Code;  00000007 Before first symbol
   7:   74 0c                     je     15 <_EIP+0x15> 00000015 Before first symbol
Code;  00000009 Before first symbol
   9:   83 c4 f8                  add    $0xfffffff8,%esp
Code;  0000000c Before first symbol
   c:   56                        push   %esi
Code;  0000000d Before first symbol
   d:   57                        push   %edi
Code;  0000000e Before first symbol
   e:   ff d0                     call   *%eax
Code;  00000010 Before first symbol
  10:   89 c3                     mov    %eax,%ebx
Code;  00000012 Before first symbol
  12:   83 c4 00                  add    $0x0,%esp


1 warning issued.  Results may not be reliable.

I know they're not exactly show-stoppers, but here they are anyway.
Cheers,
Chris
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2000-12-14 11:40 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1193.195.67.189.85.976703444.squirrel@www.zytor.com>
2000-12-14 10:13 ` /dev/cpu/*/(cpuid, msr) unhappy as modules - OOPS! Chris Rankin
2000-12-14 11:02 ` Chris Rankin
2000-12-14 11:09 ` Chris Rankin
2000-12-12 21:16 Chris Rankin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).