* [patch] patch-2.4.2-irda1 (irda-usb)
@ 2001-02-27 8:29 Dag Brattli
2001-02-27 17:33 ` Greg KH
0 siblings, 1 reply; 7+ messages in thread
From: Dag Brattli @ 2001-02-27 8:29 UTC (permalink / raw)
To: torvalds; +Cc: linux-kernel
Linus,
Please apply this patch to your latest Linux-2.4.2 source. Changes:
o IrDA-USB dongle support [new feature]
-- Dag
diff -urpN linux-2.4.2/Documentation/Configure.help linux-2.4.2-irda-patch/Documentation/Configure.help
--- linux-2.4.2/Documentation/Configure.help Tue Feb 27 08:59:00 2001
+++ linux-2.4.2-irda-patch/Documentation/Configure.help Tue Feb 27 08:59:08 2001
@@ -16739,8 +16739,7 @@ CONFIG_IRDA
infrared communication and is supported by most laptops and PDA's.
To use Linux support for the IrDA (tm) protocols, you will also need
- some user-space utilities like the irmanager and probably irattach
- as well. For more information, see the file
+ some user-space utilities like irattach. For more information, see the file
Documentation/networking/irda.txt. You also want to read the
IR-HOWTO, available at http://www.linuxdoc.org/docs.html#howto .
@@ -16849,6 +16848,19 @@ CONFIG_IRPORT_SIR
115200 bps.
If unsure, say Y.
+
+USB IrDA FIR Dongle Device Driver
+CONFIG_USB_IRDA
+ Say Y here if you want to build support for the USB IrDA FIR Dongle
+ device driver. If you want to compile it as a module (irda-usb.o),
+ say M here and read Documentation/modules.txt. IrDA-USB support the
+ various IrDA USB dongles available and most of their pecularities.
+ Those dongles plug in the USB port of your computer, are plug and
+ play, and support SIR and FIR (4Mbps) speeds. On the other hand,
+ those dongles tend to be less efficient than a FIR chipset.
+
+ Please note that the driver is still experimental. And of course,
+ you will need both USB and IrDA support in your kernel...
Winbond W83977AF IrDA Device Driver
CONFIG_WINBOND_FIR
diff -urpN linux-2.4.2/drivers/net/irda/Config.in linux-2.4.2-irda-patch/drivers/net/irda/Config.in
--- linux-2.4.2/drivers/net/irda/Config.in Tue Feb 27 08:59:00 2001
+++ linux-2.4.2-irda-patch/drivers/net/irda/Config.in Tue Feb 27 08:57:44 2001
@@ -5,14 +5,6 @@ comment 'SIR device drivers'
dep_tristate 'IrTTY (uses Linux serial driver)' CONFIG_IRTTY_SIR $CONFIG_IRDA
dep_tristate 'IrPORT (IrDA serial driver)' CONFIG_IRPORT_SIR $CONFIG_IRDA
-comment 'FIR device drivers'
-dep_tristate 'NSC PC87108/PC87338' CONFIG_NSC_FIR $CONFIG_IRDA
-dep_tristate 'Winbond W83977AF (IR)' CONFIG_WINBOND_FIR $CONFIG_IRDA
-dep_tristate 'Toshiba Type-O IR Port' CONFIG_TOSHIBA_FIR $CONFIG_IRDA
-if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
-dep_tristate 'SMC IrCC (Experimental)' CONFIG_SMC_IRCC_FIR $CONFIG_IRDA
-fi
-
comment 'Dongle support'
bool 'Serial dongle support' CONFIG_DONGLE
if [ "$CONFIG_DONGLE" != "n" ]; then
@@ -22,6 +14,15 @@ if [ "$CONFIG_DONGLE" != "n" ]; then
dep_tristate ' Greenwich GIrBIL dongle' CONFIG_GIRBIL_DONGLE $CONFIG_IRDA
dep_tristate ' Parallax LiteLink dongle' CONFIG_LITELINK_DONGLE $CONFIG_IRDA
dep_tristate ' Old Belkin dongle' CONFIG_OLD_BELKIN_DONGLE $CONFIG_IRDA
+fi
+
+comment 'FIR device drivers'
+dep_tristate 'IrDA USB dongles (Experimental)' CONFIG_USB_IRDA $CONFIG_IRDA $CONFIG_USB $CONFIG_EXPERIMENTAL
+dep_tristate 'NSC PC87108/PC87338' CONFIG_NSC_FIR $CONFIG_IRDA
+dep_tristate 'Winbond W83977AF (IR)' CONFIG_WINBOND_FIR $CONFIG_IRDA
+dep_tristate 'Toshiba Type-O IR Port' CONFIG_TOSHIBA_FIR $CONFIG_IRDA
+if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
+dep_tristate 'SMC IrCC (Experimental)' CONFIG_SMC_IRCC_FIR $CONFIG_IRDA
fi
endmenu
diff -urpN linux-2.4.2/drivers/net/irda/Makefile linux-2.4.2-irda-patch/drivers/net/irda/Makefile
--- linux-2.4.2/drivers/net/irda/Makefile Tue Feb 27 08:59:00 2001
+++ linux-2.4.2-irda-patch/drivers/net/irda/Makefile Tue Feb 27 08:57:44 2001
@@ -12,6 +12,7 @@ export-objs = irport.o
obj-$(CONFIG_IRTTY_SIR) += irtty.o
obj-$(CONFIG_IRPORT_SIR) += irport.o
+obj-$(CONFIG_USB_IRDA) += irda-usb.o
obj-$(CONFIG_NSC_FIR) += nsc-ircc.o
obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o
obj-$(CONFIG_TOSHIBA_FIR) += toshoboe.o
diff -urpN linux-2.4.2/drivers/net/irda/irda-usb.c linux-2.4.2-irda-patch/drivers/net/irda/irda-usb.c
--- linux-2.4.2/drivers/net/irda/irda-usb.c Thu Jan 1 01:00:00 1970
+++ linux-2.4.2-irda-patch/drivers/net/irda/irda-usb.c Tue Feb 27 08:57:44 2001
@@ -0,0 +1,1158 @@
+/*****************************************************************************
+ *
+ * Filename: irda-usb.c
+ * Version: 0.8
+ * Description: IrDA-USB Driver
+ * Status: Experimental
+ * Author: Dag Brattli <dag@brattli.net>
+ *
+ * Copyright (C) 2001, Dag Brattli <dag@brattli.net>
+ * Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
+ * Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/malloc.h>
+#include <linux/rtnetlink.h>
+#include <linux/usb.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/wrapper.h>
+
+#include <net/irda/irda-usb.h>
+
+static u32 min_turn_times[] = { 10000, 5000, 1000, 500, 100, 50, 10, 0 }; /* us */
+static int qos_mtt_bits = 0;
+
+static void irda_usb_dump_class_desc(struct irda_class_desc *desc);
+static struct irda_class_desc *irda_usb_find_class_desc(struct usb_device *dev, unsigned int ifnum);
+static void irda_usb_disconnect(struct usb_device *dev, void *ptr);
+static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self);
+static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static int irda_usb_open(struct irda_usb_cb *self);
+static int irda_usb_close(struct irda_usb_cb *self);
+static void irda_usb_write_bulk(struct irda_usb_cb *self, purb_t purb);
+static void write_bulk_callback(purb_t purb);
+static void irda_usb_receive(purb_t purb);
+static int irda_usb_net_init(struct net_device *dev);
+static int irda_usb_net_open(struct net_device *dev);
+static int irda_usb_net_close(struct net_device *dev);
+static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void irda_usb_net_timeout(struct net_device *dev);
+static struct net_device_stats *irda_usb_net_get_stats(struct net_device *dev);
+
+/* Master instance for each hardware found */
+#define NIRUSB 4 /* Max number of USB-IrDA dongles */
+static struct irda_usb_cb irda_instance[NIRUSB];
+
+/* These are the currently known IrDA USB dongles. Add new dongles here */
+struct irda_usb_dongle dongles[] = { /* idVendor, idProduct, idCapability */
+ /* ACTiSYS Corp, ACT-IR2000U FIR-USB Adapter */
+ { 0x9c4, 0x011, IUC_SPEED_BUG | IUC_NO_WINDOW },
+ /* KC Technology Inc., KC-180 USB IrDA Device */
+ { 0x50f, 0x180, IUC_SPEED_BUG | IUC_NO_WINDOW },
+ /* Extended Systems, Inc., XTNDAccess IrDA USB (ESI-9685) */
+ { 0x8e9, 0x100, IUC_SPEED_BUG | IUC_NO_WINDOW },
+ { 0, 0, 0 }, /* The end */
+};
+
+/*
+ * This routine is called by the USB subsystem for each new device
+ * in the system. We need to check if the device is ours, and in
+ * this case start handling it.
+ * Note : it might be worth protecting this function by a global
+ * spinlock...
+ */
+static void *irda_usb_probe(struct usb_device *dev, unsigned int ifnum,
+ const struct usb_device_id *id)
+{
+ struct irda_usb_cb *self = NULL;
+ struct usb_interface_descriptor *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct irda_class_desc *irda_desc;
+ struct irda_usb_dongle *dongle;
+ int class, subclass;
+ int found;
+ int capability = IUC_DEFAULT;
+ int ret;
+ int ep;
+ int i;
+
+ IRDA_DEBUG(0, "Vendor: %x, Product: %x\n", dev->descriptor.idVendor, dev->descriptor.idProduct);
+
+ /* Check for all known IrDA-USB dongles */
+ found = 0;
+ for (dongle=dongles;dongle->idVendor;dongle++) {
+ if ((dev->descriptor.idVendor == dongle->idVendor) &&
+ (dev->descriptor.idProduct == dongle->idProduct))
+ {
+ found = TRUE;
+ capability = dongle->idCapability;
+ break;
+ }
+ }
+ if (!found) {
+ /* Accept all dongles with IrDA-USB class/subclass */
+ class = dev->actconfig->interface[ifnum].altsetting[0].bInterfaceClass;
+ subclass = dev->actconfig->interface[ifnum].altsetting[0].bInterfaceSubClass;
+ IRDA_DEBUG(0, "Class: %x, Subclass: %x\n", class, subclass);
+
+ if ((class != USB_CLASS_APP_SPEC) || (subclass != USB_CLASS_IRDA))
+ return NULL;
+ }
+
+ MESSAGE("IRDA-USB found at address %d\n", dev->devnum);
+
+ /* Try to cleanup all instance that have a pending disconnect
+ * Instance will be in this state is the disconnect() occurs
+ * before the net_close().
+ * Jean II */
+ for (i = 0; i < NIRUSB; i++) {
+ struct irda_usb_cb *irda = &irda_instance[i];
+ if ((irda->usbdev != NULL) &&
+ (irda->present == 0) &&
+ (irda->netopen == 0)) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), found a zombie instance !!!\n");
+ irda_usb_disconnect(irda->usbdev, (void *) irda);
+ }
+ }
+
+ /* Find an free instance to handle this new device... */
+ self = NULL;
+ for (i = 0; i < NIRUSB; i++) {
+ if(irda_instance[i].usbdev == NULL) {
+ self = &irda_instance[i];
+ break;
+ }
+ }
+ if (self == NULL) {
+ IRDA_DEBUG(0, "Too many USB IrDA devices !!! (max = %d)\n",
+ NIRUSB);
+ return NULL;
+ }
+
+ /* Reset the instance */
+ self->present = 0;
+ self->netopen = 0;
+
+ /* Is this really necessary? */
+ if (usb_set_configuration (dev, dev->config[0].bConfigurationValue) < 0) {
+ err("set_configuration failed");
+ return NULL;
+ }
+
+ /* Is this really necessary? */
+ ret = usb_set_interface(dev, ifnum, 0);
+ IRDA_DEBUG(0, "usb-irda: set interface result %d\n", ret);
+ switch (ret) {
+ case USB_ST_NOERROR: /* 0 */
+ break;
+ case USB_ST_STALL: /* -EPIPE = -32 */
+ usb_clear_halt(dev, usb_sndctrlpipe(dev, 0));
+ IRDA_DEBUG(0, __FUNCTION__ "(), Clearing stall on control interface\n" );
+ break;
+ default:
+ IRDA_DEBUG(0, __FUNCTION__ "(), Unknown error %d\n", ret);
+ return NULL;
+ break;
+ }
+
+ /* Find our endpoints */
+ interface = &dev->actconfig->interface[ifnum].altsetting[0];
+ endpoint = interface->endpoint;
+ ep = endpoint[0].bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+ if ((endpoint[0].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+ self->bulk_in_ep = ep;
+ else {
+ self->bulk_out_ep = ep;
+ self->bulk_out_mtu = endpoint[0].wMaxPacketSize;
+ }
+
+ ep = endpoint[1].bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+ if ((endpoint[1].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+ self->bulk_in_ep = ep;
+ else {
+ self->bulk_out_ep = ep;
+ self->bulk_out_mtu = endpoint[1].wMaxPacketSize;
+ }
+
+ if (self->bulk_out_ep == 0 || self->bulk_in_ep == 0 ||
+ endpoint [0].bmAttributes != USB_ENDPOINT_XFER_BULK ||
+ endpoint [1].bmAttributes != USB_ENDPOINT_XFER_BULK)
+ {
+ ERROR(__FUNCTION__ "(), Bogus endpoints");
+ return NULL;
+ }
+
+ /* Find IrDA class descriptor */
+ irda_desc = irda_usb_find_class_desc(dev, ifnum);
+ if (irda_desc == NULL)
+ return NULL;
+
+ self->irda_desc = irda_desc;
+ self->present = 1;
+ self->netopen = 0;
+ self->capability = capability;
+ self->usbdev = dev;
+ ret = irda_usb_open(self);
+ if (ret)
+ return NULL;
+
+ return self;
+}
+
+/*
+ * Function irda_usb_find_class_desc(dev, ifnum)
+ *
+ * Returns instance of IrDA class descriptor, or NULL if not found
+ *
+ */
+static struct irda_class_desc *irda_usb_find_class_desc(struct usb_device *dev, unsigned int ifnum)
+{
+ struct usb_interface_descriptor *interface;
+ struct irda_class_desc *desc, *ptr;
+ int ret;
+
+ desc = kmalloc(sizeof (struct irda_class_desc), GFP_KERNEL);
+ if (desc == NULL)
+ return NULL;
+ memset(desc, 0, sizeof(struct irda_class_desc));
+
+ ret = usb_get_class_descriptor(dev, ifnum, USB_DT_IRDA, 0, (void *) desc, sizeof(struct irda_class_desc));
+ IRDA_DEBUG(0, __FUNCTION__ "(), ret=%d\n", ret);
+ if (ret) {
+ WARNING("usb-irda: usb_get_class_descriptor failed (0x%x)\n", ret);
+ }
+
+ /* Check if we found it? */
+ if (desc->bDescriptorType == USB_DT_IRDA)
+ return desc;
+
+ IRDA_DEBUG(0, __FUNCTION__ "(), parsing extra descriptors ...\n");
+
+ /* Check if the class descriptor is interleaved with standard descriptors */
+ interface = &dev->actconfig->interface[ifnum].altsetting[0];
+ ret = usb_get_extra_descriptor(interface, USB_DT_IRDA, &ptr);
+ if (ret) {
+ kfree(desc);
+ return NULL;
+ }
+ *desc = *ptr;
+#if 0
+ irda_usb_dump_class_desc(desc);
+#endif
+ return desc;
+}
+
+/*
+ * Function usb_irda_dump_class_desc(desc)
+ *
+ * Prints out the contents of the IrDA class descriptor
+ *
+ */
+static void irda_usb_dump_class_desc(struct irda_class_desc *desc)
+{
+ printk("bLength=%x\n", desc->bLength);
+ printk("bDescriptorType=%x\n", desc->bDescriptorType);
+ printk("bcdSpecRevision=%x\n", desc->bcdSpecRevision);
+ printk("bmDataSize=%x\n", desc->bmDataSize);
+ printk("bmWindowSize=%x\n", desc->bmWindowSize);
+ printk("bmMinTurnaroundTime=%d\n", desc->bmMinTurnaroundTime);
+ printk("wBaudRate=%x\n", desc->wBaudRate);
+ printk("bmAdditionalBOFs=%x\n", desc->bmAdditionalBOFs);
+ printk("bIrdaRateSniff=%x\n", desc->bIrdaRateSniff);
+ printk("bMaxUnicastList=%x\n", desc->bMaxUnicastList);
+}
+
+static void irda_usb_disconnect(struct usb_device *dev, void *ptr)
+{
+ struct irda_usb_cb *self = (struct irda_usb_cb *) ptr;
+ int i;
+
+ IRDA_DEBUG(0, __FUNCTION__ "()\n");
+
+ /* Oups ! We are not there any more */
+ self->present = 0;
+
+ /* Hum... Check if networking is still active */
+ if (self->netopen) {
+ /* Accept no more transmissions */
+ /*netif_device_detach(self->netdev);*/
+ netif_stop_queue(self->netdev);
+ /* Stop all the receive URBs */
+ for (i = 0; i < IU_MAX_RX_URBS; i++)
+ usb_unlink_urb(&(self->rx_urb[i]));
+ /* Cancel Tx and speed URB */
+ usb_unlink_urb(&(self->tx_urb));
+ usb_unlink_urb(&(self->speed_urb));
+
+ IRDA_DEBUG(0, __FUNCTION__ "(), postponing disconnect, network is still active...\n");
+ /* better not do anything just yet, usb_irda_cleanup()
+ * will do whats needed */
+ return;
+ }
+
+ /* Cleanup the device stuff */
+ irda_usb_close(self);
+ /* No longer attached to USB bus */
+ self->usbdev = NULL;
+ IRDA_DEBUG(0, __FUNCTION__ "(), USB IrDA Disconnected\n");
+}
+
+static struct usb_driver irda_driver = {
+ "irda-usb",
+ irda_usb_probe,
+ irda_usb_disconnect,
+ { NULL, NULL },
+ NULL,
+};
+
+static void irda_usb_init_qos(struct irda_usb_cb *self)
+{
+ struct irda_class_desc *desc;
+
+ desc = self->irda_desc;
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ self->qos.baud_rate.bits = desc->wBaudRate;
+ self->qos.min_turn_time.bits = desc->bmMinTurnaroundTime;
+ self->qos.additional_bofs.bits = desc->bmAdditionalBOFs;
+ self->qos.window_size.bits = desc->bmWindowSize;
+ self->qos.data_size.bits = desc->bmDataSize;
+
+ IRDA_DEBUG(0, __FUNCTION__ "(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n", self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
+
+ /* Don't always trust what the dongle tell us */
+ if (self->capability & IUC_SIR_ONLY)
+ self->qos.baud_rate.bits &= 0xff;
+ if (self->capability & IUC_SMALL_PKT)
+ self->qos.data_size.bits = 0x07;
+ if (self->capability & IUC_NO_WINDOW)
+ self->qos.window_size.bits = 0x01;
+ if (self->capability & IUC_MAX_WINDOW)
+ self->qos.window_size.bits = 0x7f;
+ if (self->capability & IUC_MAX_XBOFS)
+ self->qos.additional_bofs.bits = 0x01;
+
+#if 1
+ /* Module parameter can override the rx window size */
+ if (qos_mtt_bits)
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+#endif
+ /*
+ * Note : most of those values apply only for the receive path,
+ * the transmit path will be set differently - Jean II
+ */
+ irda_qos_bits_to_value(&self->qos);
+
+ self->flags |= IFF_SIR;
+ if (self->qos.baud_rate.value > 115200)
+ self->flags |= IFF_MIR;
+ if (self->qos.baud_rate.value > 1152000)
+ self->flags |= IFF_FIR;
+ if (self->qos.baud_rate.value > 4000000)
+ self->flags |= IFF_VFIR;
+}
+
+static int irda_usb_open(struct irda_usb_cb *self)
+{
+ struct net_device *netdev;
+ int err;
+
+ IRDA_DEBUG(0, __FUNCTION__ "()\n");
+
+ spin_lock_init(&self->lock);
+
+ irda_usb_init_qos(self);
+
+ self->tx_list = hashbin_new(HB_GLOBAL);
+
+ /* Create a network device for us */
+ if (!(netdev = dev_alloc("irda%d", &err))) {
+ ERROR(__FUNCTION__ "(), dev_alloc() failed!\n");
+ return -1;
+ }
+ self->netdev = netdev;
+ netdev->priv = (void *) self;
+
+ /* Override the network functions we need to use */
+ netdev->init = irda_usb_net_init;
+ netdev->hard_start_xmit = irda_usb_hard_xmit;
+ netdev->tx_timeout = irda_usb_net_timeout;
+ netdev->watchdog_timeo = HZ/10;
+ netdev->open = irda_usb_net_open;
+ netdev->stop = irda_usb_net_close;
+ netdev->get_stats = irda_usb_net_get_stats;
+ netdev->do_ioctl = irda_usb_net_ioctl;
+
+ rtnl_lock();
+ err = register_netdevice(netdev);
+ rtnl_unlock();
+ if (err) {
+ ERROR(__FUNCTION__ "(), register_netdev() failed!\n");
+ return -1;
+ }
+ MESSAGE("IrDA: Registered device %s\n", netdev->name);
+
+ return 0;
+}
+
+static int irda_usb_close(struct irda_usb_cb *self)
+{
+ IRDA_DEBUG(0, __FUNCTION__ "()\n");
+
+ ASSERT(self != NULL, return -1;);
+
+ /* Remove netdevice */
+ if (self->netdev) {
+ rtnl_lock();
+ unregister_netdevice(self->netdev);
+ self->netdev = NULL;
+ rtnl_unlock();
+ }
+ hashbin_delete(self->tx_list, (FREE_FUNC) &dev_kfree_skb_any);
+
+ return 0;
+}
+
+/*
+ * Function irda_usb_build_header(self, skb, header)
+ *
+ * Builds USB-IrDA outbound header
+ *
+ * Important note : the USB-IrDA spec 1.0 say very clearly in chapter 5.4.2.2
+ * that the setting of the link speed and xbof number in this outbound header
+ * should be applied *AFTER* the frame has been sent.
+ * Unfortunately, some devices are not compliant with that... It seems that
+ * reading the spec is far too difficult...
+ * Jean II
+ */
+static void irda_usb_build_header(struct irda_usb_cb *self, u8 *header,
+ int force)
+{
+ /* Set the negotiated link speed */
+ if (self->new_speed != -1) {
+ /* Hum... Ugly hack :-(
+ * Some device are not compliant with the spec and change
+ * parameters *before* sending the frame. - Jean II
+ */
+ if ((self->capability & IUC_SPEED_BUG) &&
+ (!force) && (self->speed != -1))
+ {
+ /* No speed and xbofs change here
+ * (we'll do it later in the write callback) */
+ IRDA_DEBUG(2, __FUNCTION__ "(), not changing speed yet\n");
+ *header = 0;
+ return;
+ }
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), changing speed to %d\n", self->new_speed);
+ self->speed = self->new_speed;
+ self->new_speed = -1;
+
+ switch (self->speed) {
+ case 2400:
+ *header = SPEED_2400;
+ break;
+ default:
+ case 9600:
+ *header = SPEED_9600;
+ break;
+ case 19200:
+ *header = SPEED_19200;
+ break;
+ case 38400:
+ *header = SPEED_38400;
+ break;
+ case 57600:
+ *header = SPEED_57600;
+ break;
+ case 115200:
+ *header = SPEED_115200;
+ break;
+ case 576000:
+ *header = SPEED_576000;
+ break;
+ case 1152000:
+ *header = SPEED_1152000;
+ break;
+ case 4000000:
+ *header = SPEED_4000000;
+ self->new_xbofs = 0;
+ break;
+ }
+ } else
+ /* No change */
+ *header = 0;
+
+ /* Set the negotiated additional XBOFS */
+ if (self->new_xbofs != -1) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), changing xbofs to %d\n", self->new_xbofs);
+ self->xbofs = self->new_xbofs;
+ self->new_xbofs = -1;
+
+ switch (self->xbofs) {
+ case 48:
+ *header |= 0x10;
+ break;
+ case 28:
+ case 24: /* USB spec 1.0 says 24 */
+ *header |= 0x20;
+ break;
+ default:
+ case 12:
+ *header |= 0x30;
+ break;
+ case 5: /* Bug in IrLAP spec? (should be 6) */
+ case 6:
+ *header |= 0x40;
+ break;
+ case 3:
+ *header |= 0x50;
+ break;
+ case 2:
+ *header |= 0x60;
+ break;
+ case 1:
+ *header |= 0x70;
+ break;
+ case 0:
+ *header |= 0x80;
+ break;
+ }
+ }
+}
+
+static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
+{
+ struct sk_buff *skb;
+ unsigned long flags;
+ purb_t purb;
+ int ret;
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), speed=%d, xbofs=%d\n",
+ self->new_speed, self->new_xbofs);
+
+ purb = &self->speed_urb;
+ if (purb->status != USB_ST_NOERROR) {
+ WARNING(__FUNCTION__ "(), URB still in use!\n");
+ return;
+ }
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Allocate the fake frame */
+ skb = dev_alloc_skb(IRDA_USB_SPEED_MTU);
+ if (!skb)
+ return;
+ ((struct irda_skb_cb *)skb->cb)->context = self;
+
+ /* Set the new speed and xbofs in this fake frame */
+ irda_usb_build_header(self, skb_put(skb, USB_IRDA_HEADER), 1);
+
+ /* Submit the 0 length IrDA frame to trigger new speed settings */
+ FILL_BULK_URB(purb, self->usbdev,
+ usb_sndbulkpipe(self->usbdev, self->bulk_out_ep),
+ skb->data, IRDA_USB_MAX_MTU,
+ write_bulk_callback, skb);
+ purb->transfer_buffer_length = skb->len;
+ purb->transfer_flags |= USB_QUEUE_BULK;
+ purb->timeout = MSECS_TO_JIFFIES(100);
+
+ if ((ret = usb_submit_urb(purb))) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), failed Speed URB\n");
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+}
+
+static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct irda_usb_cb *self = netdev->priv;
+ purb_t purb = &self->tx_urb;
+ unsigned long flags;
+ s32 speed;
+ s16 xbofs;
+ int mtt;
+
+ /* Check if the device is still there */
+ if ((!self) || (!self->present)) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), Device is gone...\n");
+ return 1; /* Failed */
+ }
+
+ netif_stop_queue(netdev);
+
+ /* Check if we need to change the number of xbofs */
+ xbofs = irda_get_next_xbofs(skb);
+ if ((xbofs != self->xbofs) && (xbofs != -1)) {
+ self->new_xbofs = xbofs;
+ }
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->speed) && (speed != -1)) {
+ /* Set the desired speed */
+ self->new_speed = speed;
+
+ /* Check for empty frame */
+ if (!skb->len) {
+ /* IrLAP send us an empty frame to make us change the
+ * speed. Changing speed with the USB adapter is in
+ * fact sending an empty frame to the adapter, so we
+ * could just let the present function do its job.
+ * However, we would wait for min turn time,
+ * do an extra memcpy and increment packet counters...
+ * Jean II */
+ irda_usb_change_speed_xbofs(self);
+ netdev->trans_start = jiffies;
+ dev_kfree_skb(skb);
+ /* Will netif_wake_queue() in callback */
+ return 0;
+ }
+ }
+
+ if (purb->status != USB_ST_NOERROR) {
+ WARNING(__FUNCTION__ "(), URB still in use!\n");
+ return 0;
+ }
+
+ /* Make room for IrDA-USB header */
+ skb = skb_cow(skb, USB_IRDA_HEADER);
+ if (skb == NULL)
+ return 0;
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Change setting for next frame */
+ irda_usb_build_header(self, skb_push(skb, USB_IRDA_HEADER), 0);
+
+ /* FIXME: Make macro out of this one */
+ ((struct irda_skb_cb *)skb->cb)->context = self;
+
+ FILL_BULK_URB(purb, self->usbdev,
+ usb_sndbulkpipe(self->usbdev, self->bulk_out_ep),
+ skb->data, IRDA_USB_MAX_MTU,
+ write_bulk_callback, skb);
+ purb->transfer_buffer_length = skb->len;
+ purb->transfer_flags |= USB_QUEUE_BULK;
+ purb->timeout = MSECS_TO_JIFFIES(100);
+
+ /* Generate min turn time */
+ mtt = irda_get_mtt(skb);
+ if (mtt) {
+ int diff;
+ get_fast_time(&self->now);
+ diff = self->now.tv_usec - self->stamp.tv_usec;
+ if (diff < 0)
+ diff += 1000000;
+
+ /* Check if the mtt is larger than the time we have
+ * already used by all the protocol processing
+ */
+ if (mtt > diff) {
+ mtt -= diff;
+ if (mtt > 1000) {
+ /*
+ * FIXME: can we do better than this? Maybe call
+ * a function which sends a frame to a non
+ * existing device, or change the speed to the
+ * current one a number of times just to burn
+ * time a better way.
+ */
+ mdelay(mtt/1000);
+ irda_usb_write_bulk(self, purb);
+ goto out;
+ } else
+ udelay(mtt);
+ }
+ }
+ irda_usb_write_bulk(self, purb);
+out:
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ return 0;
+}
+
+static void irda_usb_write_bulk(struct irda_usb_cb *self, purb_t purb)
+{
+ int len = purb->transfer_buffer_length;
+ int res;
+
+ if ((res = usb_submit_urb(purb))) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), failed Tx URB\n");
+ self->stats.tx_errors++;
+ netif_start_queue(self->netdev);
+
+ return;
+ }
+ self->stats.tx_packets++;
+ self->stats.tx_bytes += len;
+ self->netdev->trans_start = jiffies;
+
+ /* Send empty frame if size if a multiple of the USB max packet size */
+ ASSERT(self->bulk_out_mtu == 64, return;);
+ if ((len % self->bulk_out_mtu) == 0) {
+ /* Borrow speed urb */
+ purb = &self->speed_urb;
+ FILL_BULK_URB(purb, self->usbdev,
+ usb_sndbulkpipe(self->usbdev, self->bulk_out_ep),
+ self, /* Anything not on the stack will do */
+ IRDA_USB_MAX_MTU, NULL, NULL);
+ purb->transfer_buffer_length = 0;
+ purb->transfer_flags |= USB_QUEUE_BULK;
+ res = usb_submit_urb(purb);
+ }
+}
+
+/*
+ * Note : this function will be called with both tx_urb and speed_urb...
+ */
+static void write_bulk_callback(purb_t purb)
+{
+ struct sk_buff *skb = purb->context;
+ struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context;
+
+ /* We should always have a context */
+ if (self == NULL) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), Bug : self == NULL\n");
+ return;
+ }
+
+ /* urb is now available */
+ purb->status = USB_ST_NOERROR;
+
+ dev_kfree_skb_any(skb);
+
+ /* If the network is closed, stop everything */
+ if ((!self->netopen) || (!self->present)) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), Network is gone...\n");
+ return;
+ }
+
+ /* If we need to change the speed or xbofs, do it now */
+ if ((self->new_speed != -1) || (self->new_xbofs != -1)) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), Changing speed now...\n");
+ irda_usb_change_speed_xbofs(self);
+ } else {
+ /* Otherwise, allow the stack to send more packets */
+ netif_wake_queue(self->netdev);
+ }
+}
+
+static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, purb_t purb)
+{
+ struct irda_skb_cb *cb;
+ int ret;
+
+ IRDA_DEBUG(2, __FUNCTION__ "()\n");
+
+ /* Check that we have an urb */
+ if (!purb) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), Bug : purb == NULL\n");
+ return;
+ }
+
+ /* Allocate new skb if it has not been recycled */
+ if (!skb) {
+ skb = dev_alloc_skb(IRDA_USB_MAX_MTU + 1);
+ if (!skb) {
+ /* If this ever happen, we are in deep s***.
+ * Basically, the Rx path will stop... */
+ IRDA_DEBUG(0, __FUNCTION__ "(), Failed to allocate Rx skb\n");
+ return;
+ }
+ } else {
+ /* Reset recycled skb */
+ skb->data = skb->tail = skb->head;
+ skb->len = 0;
+ }
+ /* Make sure IP header get aligned (IrDA header is 5 bytes ) */
+ skb_reserve(skb, 1);
+
+ /* Save ourselves */
+ cb = (struct irda_skb_cb *) skb->cb;
+ cb->context = self;
+
+ /* Reinitialize URB */
+ FILL_BULK_URB(purb, self->usbdev,
+ usb_rcvbulkpipe(self->usbdev, self->bulk_in_ep),
+ skb->data, skb->truesize,
+ irda_usb_receive, skb);
+ purb->transfer_flags |= USB_QUEUE_BULK;
+ purb->status = USB_ST_NOERROR;
+
+ ret = usb_submit_urb(purb);
+ if (ret) {
+ /* If this ever happen, we are in deep s***.
+ * Basically, the Rx path will stop... */
+ IRDA_DEBUG(0, __FUNCTION__ "(), Failed to submit Rx URB %d\n", ret);
+ }
+}
+
+/*
+ * Function irda_usb_receive(purb)
+ *
+ * Called by the USB subsystem when a frame has been received
+ *
+ */
+static void irda_usb_receive(purb_t purb)
+{
+ struct sk_buff *skb = (struct sk_buff *) purb->context;
+ struct irda_usb_cb *self;
+ struct irda_skb_cb *cb;
+ struct sk_buff *new;
+
+ /* Find ourselves */
+ cb = (struct irda_skb_cb *) skb->cb;
+ ASSERT(cb != NULL, return;);
+ self = (struct irda_usb_cb *) cb->context;
+ ASSERT(self != NULL, return;);
+
+ /* If the network is closed or the device gone, stop everything */
+ if ((!self->netopen) || (!self->present)) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), Network is gone!\n");
+ /* Don't re-submit the URB : will stall the Rx path */
+ return;
+ }
+
+ /* Check the status */
+ if (purb->status != USB_ST_NOERROR) {
+ switch (purb->status) {
+ case USB_ST_CRC: /* -EILSEQ */
+ self->stats.rx_errors++;
+ self->stats.rx_crc_errors++;
+ break;
+ default:
+ WARNING(__FUNCTION__ "(), RX status %d\n", purb->status);
+ break;
+ }
+ goto done;
+ }
+
+ /* Check for empty frames */
+ if (purb->actual_length <= USB_IRDA_HEADER) {
+ WARNING(__FUNCTION__ "(), empty frame!\n");
+ goto done;
+ }
+
+ /*
+ * Remember the time we received this frame, so we can
+ * reduce the min turn time a bit since we will know
+ * how much time we have used for protocol processing
+ */
+ get_fast_time(&self->stamp);
+
+ /* Fix skb, and remove USB-IrDA header */
+ skb_put(skb, purb->actual_length);
+ skb_pull(skb, USB_IRDA_HEADER);
+
+ /* Don't waste a lot of memory on small IrDA frames */
+ if (skb->len < RX_COPY_THRESHOLD) {
+ new = dev_alloc_skb(skb->len+1);
+ if (!new) {
+ self->stats.rx_dropped++;
+ goto done;
+ }
+
+ /* Make sure IP header get aligned (IrDA header is 5 bytes) */
+ skb_reserve(new, 1);
+
+ /* Copy packet, so we can recycle the original */
+ memcpy(skb_put(new, skb->len), skb->data, skb->len);
+ } else {
+ /* Deliver the original skb */
+ new = skb;
+ skb = NULL;
+ }
+
+ self->stats.rx_bytes += new->len;
+ self->stats.rx_packets++;
+
+ /* Ask the networking layer to queue the packet for the IrDA stack */
+ new->dev = self->netdev;
+ new->mac.raw = new->data;
+ new->protocol = htons(ETH_P_IRDA);
+ netif_rx(new);
+done:
+ /* Recycle Rx URB (and possible the skb as well) */
+ irda_usb_submit(self, skb, purb);
+}
+
+static int irda_usb_net_init(struct net_device *dev)
+{
+ IRDA_DEBUG(0, __FUNCTION__ "()\n");
+
+ /* Set up to be a normal IrDA network device driver */
+ irda_device_setup(dev);
+
+ /* Insert overrides below this line! */
+
+ return 0;
+}
+
+/*
+ * Function irda_usb_net_open (dev)
+ *
+ * Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ *
+ * Note : don't mess with self->netopen - Jean II
+ */
+static int irda_usb_net_open(struct net_device *netdev)
+{
+ struct irda_usb_cb *self;
+ int i;
+
+ IRDA_DEBUG(0, __FUNCTION__ "()\n");
+
+ ASSERT(netdev != NULL, return -1;);
+ self = (struct irda_usb_cb *) netdev->priv;
+ ASSERT(self != NULL, return -1;);
+
+ /* Can only open the device if it's there */
+ if(!self->present) {
+ WARNING(__FUNCTION__ "(), device not present!\n");
+ return -1;
+ }
+
+ /* Initialise default speed and xbofs value
+ * (IrLAP will change that soon) */
+ self->speed = -1;
+ self->xbofs = -1;
+ self->new_speed = -1;
+ self->new_xbofs = -1;
+
+ /* To do *before* submitting Rx urbs and starting net Tx queue
+ * Jean II */
+ self->netopen = 1;
+
+ /*
+ * Now that everything should be initialized properly,
+ * Open new IrLAP layer instance to take care of us...
+ * Note : will send immediately a speed change...
+ */
+ self->irlap = irlap_open(netdev, &self->qos);
+ ASSERT(self->irlap != NULL, return -1;);
+
+ /* Allow IrLAP to send data to us */
+ netif_start_queue(netdev);
+
+ /* Now that we can pass data to IrLAP, allow the USB layer
+ * to send us some data... */
+ for (i = 0; i < IU_MAX_RX_URBS; i++)
+ irda_usb_submit(self, NULL, &(self->rx_urb[i]));
+
+ /* Ready to play !!! */
+ MOD_INC_USE_COUNT;
+ return 0;
+}
+
+/*
+ * Function irda_usb_net_close (self)
+ *
+ * Network device is taken down. Usually this is done by
+ * "ifconfig irda0 down"
+ */
+static int irda_usb_net_close(struct net_device *netdev)
+{
+ struct irda_usb_cb *self;
+ int i;
+
+ IRDA_DEBUG(0, __FUNCTION__ "()\n");
+
+ ASSERT(netdev != NULL, return -1;);
+ self = (struct irda_usb_cb *) netdev->priv;
+ ASSERT(self != NULL, return -1;);
+
+ /* Clear this flag *before* unlinking the urbs and *before*
+ * stopping the network Tx queue - Jean II */
+ self->netopen = 0;
+
+ /* Stop network Tx queue */
+ netif_stop_queue(netdev);
+
+ /* Deallocate all the Rx path buffers (URBs and skb) */
+ for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ purb_t purb = &(self->rx_urb[i]);
+ struct sk_buff *skb = (struct sk_buff *) purb->context;
+ /* Cancel the receive command */
+ usb_unlink_urb(purb);
+ /* The skb is ours, free it */
+ if (skb) {
+ dev_kfree_skb(skb);
+ purb->context = NULL;
+ }
+ }
+ /* Cancel Tx and speed URB */
+ usb_unlink_urb(&self->tx_urb);
+ usb_unlink_urb(&self->speed_urb);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ MOD_DEC_USE_COUNT;
+
+ return 0;
+}
+
+static void irda_usb_net_timeout(struct net_device *netdev)
+{
+ struct irda_usb_cb *self = netdev->priv;
+ int done = 0; /* If we have made any progress */
+ purb_t purb;
+
+ IRDA_DEBUG(0, __FUNCTION__ "(), Network layer thinks we timed out!\n");
+
+ if (!self || !self->present) {
+ WARNING(__FUNCTION__ "(), device not present!\n");
+ netif_stop_queue(netdev);
+ return;
+ }
+ WARNING("%s: Tx timed out\n", netdev->name);
+ self->stats.tx_errors++;
+
+ /* Check Tx URB */
+ purb = &self->tx_urb;
+ switch (purb->status) {
+ case -ECONNABORTED: /* Can't find proper USB_ST_* code */
+ purb->status = USB_ST_NOERROR;
+ netif_wake_queue(self->netdev);
+ done = 1;
+ break;
+ case USB_ST_URB_PENDING: /* -EINPROGRESS == -115 */
+ usb_unlink_urb(purb);
+ done = 1;
+ break;
+ default:
+ break;
+ }
+ /* Check speed URB */
+ purb = &self->speed_urb;
+ switch (purb->status) {
+ case -ECONNABORTED: /* Can't find proper USB_ST_* code */
+ purb->status = USB_ST_NOERROR;
+ netif_wake_queue(self->netdev);
+ done = 1;
+ break;
+ case USB_ST_URB_PENDING: /* -EINPROGRESS */
+ usb_unlink_urb(purb);
+ done = 1;
+ break;
+ default:
+ break;
+ }
+ /* Maybe we need a reset */
+ /* if(done == 0) */
+}
+
+static int irda_usb_is_receiving(struct irda_usb_cb *self)
+{
+ return 0; /* For now */
+}
+
+static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct irda_usb_cb *self;
+ int ret = 0;
+
+ ASSERT(dev != NULL, return -1;);
+ self = dev->priv;
+ ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, __FUNCTION__ "(), %s, (cmd=0x%X)\n", dev->name, cmd);
+
+ /* Check if the device is still there */
+ if (!self->present)
+ return -EFAULT;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ /* Set the desired speed */
+ self->new_speed = irq->ifr_baudrate;
+ irda_usb_change_speed_xbofs(self);
+ /* Note : will spinlock in above function */
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = irda_usb_is_receiving(self);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static struct net_device_stats *irda_usb_net_get_stats(struct net_device *dev)
+{
+ struct irda_usb_cb *self = dev->priv;
+ return &self->stats;
+}
+
+int __init usb_irda_init(void)
+{
+ if (usb_register(&irda_driver) < 0)
+ return -1;
+
+ MESSAGE("USB IrDA support registered\n");
+ return 0;
+}
+module_init(usb_irda_init);
+
+void __exit usb_irda_cleanup(void)
+{
+ struct irda_usb_cb *irda = NULL;
+ int i;
+
+ /* Find zombie instances and kill them... */
+ for (i = 0; i < NIRUSB; i++) {
+ irda = &irda_instance[i];
+ /* If the Device is zombie */
+ if((irda->usbdev != NULL) && (irda->present == 0)) {
+ IRDA_DEBUG(0, __FUNCTION__ "(), disconnect zombie now !\n");
+ irda_usb_disconnect(irda->usbdev, (void *) irda);
+ }
+ }
+ /* Deregister the driver and remove all pending instances */
+ usb_deregister(&irda_driver);
+}
+module_exit(usb_irda_cleanup);
+
+MODULE_PARM(qos_mtt_bits, "i");
+MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
+MODULE_AUTHOR("Roman Weissgaerber <weissg@vienna.at>, Dag Brattli <dag@brattli.net> and Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver");
+
+
+
diff -urpN linux-2.4.2/include/net/irda/irda-usb.h linux-2.4.2-irda-patch/include/net/irda/irda-usb.h
--- linux-2.4.2/include/net/irda/irda-usb.h Thu Jan 1 01:00:00 1970
+++ linux-2.4.2-irda-patch/include/net/irda/irda-usb.h Tue Feb 27 08:57:05 2001
@@ -0,0 +1,122 @@
+/*****************************************************************************
+ *
+ * Filename: irda-usb.h
+ * Version: 0.8
+ * Description: IrDA-USB Driver
+ * Status: Experimental
+ * Author: Dag Brattli <dag@brattli.net>
+ *
+ * Copyright (C) 2001, Dag Brattli <dag@brattli.net>
+ * Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/time.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irda_device.h>
+
+#define RX_COPY_THRESHOLD 200
+#define IRDA_USB_MAX_MTU 2051
+#define IRDA_USB_SPEED_MTU 64 /* Weird, but work like this */
+
+/*
+ * Maximum number of URB on the Rx and Tx path, a number larger than 1
+ * is required for handling back-to-back (brickwalled) frames
+ */
+#define IU_MAX_RX_URBS 1 /* Most devices can only handle one */
+#define IU_MAX_TX_URBS 1
+
+/* Inbound header */
+#define MEDIA_BUSY 0x80
+
+#define SPEED_2400 0x01
+#define SPEED_9600 0x02
+#define SPEED_19200 0x03
+#define SPEED_38400 0x04
+#define SPEED_57600 0x05
+#define SPEED_115200 0x06
+#define SPEED_576000 0x07
+#define SPEED_1152000 0x08
+#define SPEED_4000000 0x09
+
+struct irda_usb_dongle {
+ __u32 idVendor;
+ __u32 idProduct;
+ __u32 idCapability; /* Capability of the hardware */
+};
+#define IUC_DEFAULT 0x00 /* Basic device compliant with 1.0 spec */
+#define IUC_SPEED_BUG 0x01 /* Device doesn't set speed after the frame */
+#define IUC_SIR_ONLY 0x02 /* Device doesn't behave at FIR speeds */
+#define IUC_SMALL_PKT 0x04 /* Device doesn't behave with big Rx packets */
+#define IUC_NO_WINDOW 0x08 /* Device doesn't behave with big Rx window */
+#define IUC_MAX_WINDOW 0x10 /* Device underestimate the Rx window */
+#define IUC_MAX_XBOFS 0x20 /* Device need more xbofs than advertised */
+
+#define USB_IRDA_HEADER 0x01
+#define USB_CLASS_IRDA 0x02 /* USB_CLASS_APP_SPEC subclass */
+#define USB_DT_IRDA 0x21
+
+struct irda_class_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u16 bcdSpecRevision;
+ __u8 bmDataSize;
+ __u8 bmWindowSize;
+ __u8 bmMinTurnaroundTime;
+ __u16 wBaudRate;
+ __u8 bmAdditionalBOFs;
+ __u8 bIrdaRateSniff;
+ __u8 bMaxUnicastList;
+} __attribute__ ((packed));
+
+struct irda_usb_cb {
+ struct irda_class_desc *irda_desc;
+ struct usb_device *usbdev; /* init: probe_irda */
+ unsigned int ifnum; /* Interface number of the USB dev. */
+ int netopen; /* Device is active for network */
+ int present; /* Device is present on the bus */
+ __u32 capability; /* Capability of the hardware */
+ __u8 bulk_in_ep, bulk_out_ep; /* Endpoint assignments */
+ __u16 bulk_out_mtu;
+
+ wait_queue_head_t wait_q; /* for timeouts */
+
+ struct urb rx_urb[IU_MAX_RX_URBS]; /* URBs used to receive data frames */
+ struct urb tx_urb; /* URB used to send data frames */
+ struct urb speed_urb; /* URB used to send speed commands */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdev. */
+ struct net_device_stats stats;
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos;
+ hashbin_t *tx_list; /* Queued transmit skb's */
+
+ struct timeval stamp;
+ struct timeval now;
+
+ spinlock_t lock; /* For serializing operations */
+
+ __u16 xbofs; /* Current xbofs setting */
+ __s16 new_xbofs; /* xbofs we need to set */
+ __u32 speed; /* Current speed */
+ __s32 new_speed; /* speed we need to set */
+ __u32 flags; /* Interface flags */
+};
+
+
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [patch] patch-2.4.2-irda1 (irda-usb)
2001-02-27 8:29 [patch] patch-2.4.2-irda1 (irda-usb) Dag Brattli
@ 2001-02-27 17:33 ` Greg KH
2001-02-27 20:32 ` Dag Brattli
0 siblings, 1 reply; 7+ messages in thread
From: Greg KH @ 2001-02-27 17:33 UTC (permalink / raw)
To: Dag Brattli; +Cc: torvalds, linux-kernel
On Tue, Feb 27, 2001 at 08:29:03AM +0000, Dag Brattli wrote:
> Linus,
>
> Please apply this patch to your latest Linux-2.4.2 source. Changes:
>
> o IrDA-USB dongle support [new feature]
I'd recommend that this file be in the /drivers/usb directory, much like
almost all other USB drivers are.
> +/* These are the currently known IrDA USB dongles. Add new dongles here */
> +struct irda_usb_dongle dongles[] = { /* idVendor, idProduct, idCapability */
> + /* ACTiSYS Corp, ACT-IR2000U FIR-USB Adapter */
> + { 0x9c4, 0x011, IUC_SPEED_BUG | IUC_NO_WINDOW },
> + /* KC Technology Inc., KC-180 USB IrDA Device */
> + { 0x50f, 0x180, IUC_SPEED_BUG | IUC_NO_WINDOW },
> + /* Extended Systems, Inc., XTNDAccess IrDA USB (ESI-9685) */
> + { 0x8e9, 0x100, IUC_SPEED_BUG | IUC_NO_WINDOW },
> + { 0, 0, 0 }, /* The end */
> +};
You should also probably add the following snippet to allow the USB
hotplug functionality to work properly:
static __devinitdata struct usb_device_id id_table [] = {
{ USB_DEVICE(0x09c4, 0x0011) },
{ USB_DEVICE(0x050f, 0x0180) },
{ USB_DEVICE(0x08e9, 0x0100) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table);
If IRDA has a class descriptor, can't you just rely on that, and not
have to worry about the individual device vendor and product ids?
> + * This routine is called by the USB subsystem for each new device
> + * in the system. We need to check if the device is ours, and in
> + * this case start handling it.
> + * Note : it might be worth protecting this function by a global
> + * spinlock...
> +static void *irda_usb_probe(struct usb_device *dev, unsigned int ifnum,
> + const struct usb_device_id *id)
A spinlock is not needed as the probe functions are called sequentially.
thanks,
greg k-h
--
greg@(kroah|wirex).com
http://immunix.org/~greg
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [patch] patch-2.4.2-irda1 (irda-usb)
2001-02-27 17:33 ` Greg KH
@ 2001-02-27 20:32 ` Dag Brattli
2001-02-27 21:58 ` Greg KH
0 siblings, 1 reply; 7+ messages in thread
From: Dag Brattli @ 2001-02-27 20:32 UTC (permalink / raw)
To: greg; +Cc: torvalds, linux-kernel, jt
On Tue, 27 Feb 2001 09:33:29 -0800, Greg KH wrote:
> On Tue, Feb 27, 2001 at 08:29:03AM +0000, Dag Brattli wrote:
> > Linus,
> >
> > Please apply this patch to your latest Linux-2.4.2 source. Changes:
> >
> > o IrDA-USB dongle support [new feature]
>
> I'd recommend that this file be in the /drivers/usb directory, much like
> almost all other USB drivers are.
Yes, but do we want to spread the IrDA code around? The same argument
applies to IrDA device drivers!?
> > +/* These are the currently known IrDA USB dongles. Add new dongles here */
> > +struct irda_usb_dongle dongles[] = { /* idVendor, idProduct, idCapability */
> > + /* ACTiSYS Corp, ACT-IR2000U FIR-USB Adapter */
> > + { 0x9c4, 0x011, IUC_SPEED_BUG | IUC_NO_WINDOW },
> > + /* KC Technology Inc., KC-180 USB IrDA Device */
> > + { 0x50f, 0x180, IUC_SPEED_BUG | IUC_NO_WINDOW },
> > + /* Extended Systems, Inc., XTNDAccess IrDA USB (ESI-9685) */
> > + { 0x8e9, 0x100, IUC_SPEED_BUG | IUC_NO_WINDOW },
> > + { 0, 0, 0 }, /* The end */
> > +};
>
> You should also probably add the following snippet to allow the USB
> hotplug functionality to work properly:
>
> static __devinitdata struct usb_device_id id_table [] = {
> { USB_DEVICE(0x09c4, 0x0011) },
> { USB_DEVICE(0x050f, 0x0180) },
> { USB_DEVICE(0x08e9, 0x0100) },
> { } /* Terminating entry */
> };
> MODULE_DEVICE_TABLE (usb, id_table);
OK!
> If IRDA has a class descriptor, can't you just rely on that, and not
> have to worry about the individual device vendor and product ids?
Sorry, some of the dongles don't follow the spec fully, as you can see from
our table. Actually none of them follow the spec, since they are all based
on the same chip which was made before the spec was finished. But there
should be a new dongle out now which do follow the spec (but we haven't
got hold of it yet)
>
> > + * This routine is called by the USB subsystem for each new device
> > + * in the system. We need to check if the device is ours, and in
> > + * this case start handling it.
> > + * Note : it might be worth protecting this function by a global
> > + * spinlock...
> > +static void *irda_usb_probe(struct usb_device *dev, unsigned int ifnum,
> > + const struct usb_device_id *id)
>
> A spinlock is not needed as the probe functions are called sequentially.
>
> thanks,
>
> greg k-h
----
Dag Brattli <dag@brattli.net>
My homepage http://www.brattli.net/dag/
Try Linux-IrDA: http://irda.sourceforge.net/
Try Pygmy: http://pygmy.sourceforge.net/
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [patch] patch-2.4.2-irda1 (irda-usb)
2001-02-27 20:32 ` Dag Brattli
@ 2001-02-27 21:58 ` Greg KH
2001-02-28 2:41 ` Jean Tourrilhes
0 siblings, 1 reply; 7+ messages in thread
From: Greg KH @ 2001-02-27 21:58 UTC (permalink / raw)
To: Dag Brattli; +Cc: torvalds, linux-kernel, jt
On Tue, Feb 27, 2001 at 08:32:28PM +0000, Dag Brattli wrote:
> > I'd recommend that this file be in the /drivers/usb directory, much like
> > almost all other USB drivers are.
>
> Yes, but do we want to spread the IrDA code around? The same argument
> applies to IrDA device drivers!?
I agree, and am not saying that it _has_ to be there. Just a
suggestion, and if you're comfortable with it in the irda directory,
that's fine.
thanks,
greg k-h
--
greg@(kroah|wirex).com
http://immunix.org/~greg
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [patch] patch-2.4.2-irda1 (irda-usb)
2001-02-27 21:58 ` Greg KH
@ 2001-02-28 2:41 ` Jean Tourrilhes
2001-02-28 5:40 ` Greg KH
0 siblings, 1 reply; 7+ messages in thread
From: Jean Tourrilhes @ 2001-02-28 2:41 UTC (permalink / raw)
To: Greg KH, Dag Brattli, torvalds, linux-kernel
On Tue, Feb 27, 2001 at 01:58:11PM -0800, Greg KH wrote:
> On Tue, Feb 27, 2001 at 08:32:28PM +0000, Dag Brattli wrote:
> > > I'd recommend that this file be in the /drivers/usb directory, much like
> > > almost all other USB drivers are.
> >
> > Yes, but do we want to spread the IrDA code around? The same argument
> > applies to IrDA device drivers!?
>
> I agree, and am not saying that it _has_ to be there. Just a
> suggestion, and if you're comfortable with it in the irda directory,
> that's fine.
>
> thanks,
>
> greg k-h
Hi,
First thanks for Dag for bringing me into the conversation. I
may add my little bit of spice, especially that I was the one pushing
for having the driver in .../drivers/net/irda.
By the way, Greg, sorry if I hurt your feeling, I don't want
to put down any of the great work that has been done on the USB stack.
My feeling is that devices are mostly defined by their higher
level interface, because this is what is closer to the user.
If I look at a Pcmcia Ethernet card, I will tend to associate
more with a PCI Ethernet card rather than a Pcmcia SCSI card. Both
card have the same high level interface (TCP/IP) even if their low
level interface is different (Pcmcia, PCI).
People tend to agree with that, and that's why you have
directories called drivers/net, drivers/scsi and driver/sound, rather
that drivers/pci, drivers/isa, drivers/mca and drivers/pcmcia.
If I get an IrDA-USB dongle, the feature that matter the most
is that it does IrDA, the fact that it connect to my PC via USB is
rather secondary.
That's it. I hope it explain some of the rationale and why we
departed from the usual drivers/usb arrangement. Actually, I think
that stuffing all USB drivers in drivers/usb is not that great, but
that's not my call...
Have fun...
Jean
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [patch] patch-2.4.2-irda1 (irda-usb)
2001-02-28 2:41 ` Jean Tourrilhes
@ 2001-02-28 5:40 ` Greg KH
0 siblings, 0 replies; 7+ messages in thread
From: Greg KH @ 2001-02-28 5:40 UTC (permalink / raw)
To: jt; +Cc: Dag Brattli, torvalds, linux-kernel
On Tue, Feb 27, 2001 at 06:41:09PM -0800, Jean Tourrilhes wrote:
>
> First thanks for Dag for bringing me into the conversation. I
> may add my little bit of spice, especially that I was the one pushing
> for having the driver in .../drivers/net/irda.
> By the way, Greg, sorry if I hurt your feeling, I don't want
> to put down any of the great work that has been done on the USB stack.
Thanks, but it didn't bother me, or hurt any of my feelings at all. I
just wanted to point out that all of the other usb drivers (with 2
exceptions) reside in the drivers/usb directory, and I didn't know if
you knew that.
(the exceptions are the input drivers, which are part of the input core,
and the cpia video driver, which has the parallel port and the usb
driver all together in one file.)
> My feeling is that devices are mostly defined by their higher
> level interface, because this is what is closer to the user.
> If I look at a Pcmcia Ethernet card, I will tend to associate
> more with a PCI Ethernet card rather than a Pcmcia SCSI card. Both
> card have the same high level interface (TCP/IP) even if their low
> level interface is different (Pcmcia, PCI).
> People tend to agree with that, and that's why you have
> directories called drivers/net, drivers/scsi and driver/sound, rather
> that drivers/pci, drivers/isa, drivers/mca and drivers/pcmcia.
This argument has been discussed in the past (see the linux-usb-devel
and linux-kernel mailing list archives) but from what I remember, Linus
and others wanted them all to stay in the drivers/usb directory for now.
Personally I don't care either way, but it has been easier to do usb
core changes (such as the hotplug interface changes that I suggested for
your driver) with all of the drivers in one place, not that I can't do a
recursive grep :)
thanks,
greg k-h
--
greg@(kroah|wirex).com
http://immunix.org/~greg
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [patch] patch-2.4.2-irda1 (irda-usb)
@ 2001-02-28 3:43 Dunlap, Randy
0 siblings, 0 replies; 7+ messages in thread
From: Dunlap, Randy @ 2001-02-28 3:43 UTC (permalink / raw)
To: 'jt@hpl.hp.com', Greg KH, Dag Brattli, linux-kernel
> From: Jean Tourrilhes [mailto:jt@bougret.hpl.hp.com]
>
> First thanks for Dag for bringing me into the conversation. I
> may add my little bit of spice, especially that I was the one pushing
> for having the driver in .../drivers/net/irda.
> By the way, Greg, sorry if I hurt your feeling, I don't want
> to put down any of the great work that has been done on the USB stack.
>
> My feeling is that devices are mostly defined by their higher
> level interface, because this is what is closer to the user.
> If I look at a Pcmcia Ethernet card, I will tend to associate
> more with a PCI Ethernet card rather than a Pcmcia SCSI card. Both
> card have the same high level interface (TCP/IP) even if their low
> level interface is different (Pcmcia, PCI).
> People tend to agree with that, and that's why you have
> directories called drivers/net, drivers/scsi and driver/sound, rather
> that drivers/pci, drivers/isa, drivers/mca and drivers/pcmcia.
>
> If I get an IrDA-USB dongle, the feature that matter the most
> is that it does IrDA, the fact that it connect to my PC via USB is
> rather secondary.
> That's it. I hope it explain some of the rationale and why we
> departed from the usual drivers/usb arrangement. Actually, I think
> that stuffing all USB drivers in drivers/usb is not that great, but
> that's not my call...
That has been discussed & Linus like[ds] it that way.
~Randy
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2001-02-28 5:39 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-02-27 8:29 [patch] patch-2.4.2-irda1 (irda-usb) Dag Brattli
2001-02-27 17:33 ` Greg KH
2001-02-27 20:32 ` Dag Brattli
2001-02-27 21:58 ` Greg KH
2001-02-28 2:41 ` Jean Tourrilhes
2001-02-28 5:40 ` Greg KH
2001-02-28 3:43 Dunlap, Randy
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).