Adaptec 2400A

Adaptec 2400A

[Ryan C. Bonham]

Hi,

Has anyone been sucesfull in getting the Adaptec 2400A Raid card to work
under the 2.4.X Kernel?  I have Redhat 7.1, and have been uncesesfull in
getting linux to install with support for this card. I have used the Beta
Drivers(239) from adaptec and my system just locks when loading the
drivers...  Thanks for any help.

Ryan C. Bonham
System Administrator
Summit Ridge Farms
Phone: (570)-756-2656
Fax: (570)-756-2826

Re: Adaptec 2400A

[Art Boulatov]

On Tuesday 17 July 2001 10:58 pm, Ryan C. Bonham wrote:
> Hi,
>
> Has anyone been sucesfull in getting the Adaptec 2400A Raid card to work
> under the 2.4.X Kernel?  I have Redhat 7.1, and have been uncesesfull in
> getting linux to install with support for this card. I have used the Beta
> Drivers(239) from adaptec and my system just locks when loading the
> drivers...  Thanks for any help.

Hi,
just by the way,
I was trying to set up both RAID5 and RAID0 with Adaptec 3400S  ULTRA160 SCSI 
RAID using the driver patch from their site for 2.4 kernel. Everything went 
just FINE.  The driver did what it  was supposed to do and gave  me no 
errors. Except ocasionally, during reboot when the card's BIOS goes through 
initialization it says I have 1-2 drives failed (could be random). I've 
checked I guess everything I could. After the raid rebuild I could install 
and run the system again for days without errors or bad symptoms at all. 
Untill reboot. Not every reboot but _from_time_to_time_ it failed again. 
I did that for several times.
I guess this problem should be forwarded to Adaptec support, but could 
anybody please give some ideas, at least is that a buggy driver or a buggy 
card?

Thanks,
Art.

RE: Adaptec 2400A

[Ryan C. Bonham]

Sorry, for needlessly posting to the mailinglist, i was being stupid for a
moment... (BAD DRIVER DISK) :)  

-----Original Message-----
From: Ryan C. Bonham [mailto:Ryan@srfarms.com]
Sent: Tuesday, July 17, 2001 8:24 AM
To: Linux-Kernel
Subject: Adaptec 2400A


Hi,

First i apologize i realize this mailing list isn't the best place to post
this question. That said i am trying to install Redhat 7.1 on a new machine.
The computer has an adaptec 2400A IDE RAID controller card on it. Out of the
box, redhat doesn't see the card so it can't find a drive to install on. The
card comes with drivers for redhat 6.0-7.0. SO basically i read that to mean
anything other then the 2.4 kernel.. I just want to know if anyone knows of
a driver for redhat 7.1?  Thanks in advance

Ryan Bonham
ryan@srfarms.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Adaptec 2400A

[Ryan C. Bonham]

Hi,

First i apologize i realize this mailing list isn't the best place to post
this question. That said i am trying to install Redhat 7.1 on a new machine.
The computer has an adaptec 2400A IDE RAID controller card on it. Out of the
box, redhat doesn't see the card so it can't find a drive to install on. The
card comes with drivers for redhat 6.0-7.0. SO basically i read that to mean
anything other then the 2.4 kernel.. I just want to know if anyone knows of
a driver for redhat 7.1?  Thanks in advance

Ryan Bonham
ryan@srfarms.com