* 2.4.7 & 2.4.8-pre8 fail to boot
@ 2001-08-10 19:29 jlnance
2001-08-10 22:03 ` Alan Cox
0 siblings, 1 reply; 2+ messages in thread
From: jlnance @ 2001-08-10 19:29 UTC (permalink / raw)
To: linux-kernel; +Cc: jkern
Hello All,
I have some dual CPU P3 machines that I can not get to boot. I am able
to get 2.4.5 to work. Here is a description of what happens during boot:
> Here is the ouput I wrote down from the boot output.
>
> Before bogocount - setting activated=1
> Boot done.
> Eabling IO-APIC IRQs
> ... changing IO-APIC physical APIC-IO to 2 ..OK
> Synchronizing Arb IDs
> ..TIMER: vector=31 pin1=2 pin2=0
>
> at this point it hangs..usually with a blank screen.
Does anyone have any idea whats going on or how to get around this?
Thanks,
Jim
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 2.4.7 & 2.4.8-pre8 fail to boot
2001-08-10 19:29 2.4.7 & 2.4.8-pre8 fail to boot jlnance
@ 2001-08-10 22:03 ` Alan Cox
0 siblings, 0 replies; 2+ messages in thread
From: Alan Cox @ 2001-08-10 22:03 UTC (permalink / raw)
To: jlnance; +Cc: linux-kernel, jkern
> Hello All,
> I have some dual CPU P3 machines that I can not get to boot. I am able
> to get 2.4.5 to work. Here is a description of what happens during boot:
ASUS CUV series boards ? - if so get a newer BIOS (007 or 10 )
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-08-10 22:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-08-10 19:29 2.4.7 & 2.4.8-pre8 fail to boot jlnance
2001-08-10 22:03 ` Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).