* Lost interrupt with HPT370 @ 2001-08-12 12:49 Adam Huffman 2001-08-12 13:57 ` Alan Cox 0 siblings, 1 reply; 6+ messages in thread From: Adam Huffman @ 2001-08-12 12:49 UTC (permalink / raw) To: linux-kernel I get hde/hdg: lost interrupt messages when booting with 2.4.7/8. There are two IBM DTLA-307030 drives on the HPT370 interface (m/b is Abit KA7-100). 2.4.6-ac5 (which I had been using for quite a while) does not have this problem. Adam ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Lost interrupt with HPT370 2001-08-12 12:49 Lost interrupt with HPT370 Adam Huffman @ 2001-08-12 13:57 ` Alan Cox 2001-08-13 5:08 ` Kevin P. Fleming 0 siblings, 1 reply; 6+ messages in thread From: Alan Cox @ 2001-08-12 13:57 UTC (permalink / raw) To: Adam Huffman; +Cc: linux-kernel > I get hde/hdg: lost interrupt messages when booting with 2.4.7/8. > > There are two IBM DTLA-307030 drives on the HPT370 interface (m/b is > Abit KA7-100). > > 2.4.6-ac5 (which I had been using for quite a while) does not have this > problem. The fixes you need to run certain HPT cards with certain drives (HPT370 included) are not in the Linus tree. Its waiting Andre to submit the relevant stuff on to Linus ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Lost interrupt with HPT370 2001-08-12 13:57 ` Alan Cox @ 2001-08-13 5:08 ` Kevin P. Fleming 0 siblings, 0 replies; 6+ messages in thread From: Kevin P. Fleming @ 2001-08-13 5:08 UTC (permalink / raw) To: Alan Cox; +Cc: linux-kernel I have just tried an HPT-366 card with IC35L040VER07 drives (latest DeskStar 41G ATA-100, although the card is only ATA-66) and could not get them to even let me create a filesystem without hard locking the machine. This was using 2.4.8-ac1 and 2.4.7-ac11. I wrote this off to motherboard/IDE card compatibility (or lack thereof), but could it still be an IDE driver issue? ----- Original Message ----- From: "Alan Cox" <alan@lxorguk.ukuu.org.uk> To: "Adam Huffman" <bloch@verdurin.com> Cc: <linux-kernel@vger.kernel.org> Sent: Sunday, August 12, 2001 6:57 AM Subject: Re: Lost interrupt with HPT370 > > I get hde/hdg: lost interrupt messages when booting with 2.4.7/8. > > > > There are two IBM DTLA-307030 drives on the HPT370 interface (m/b is > > Abit KA7-100). > > > > 2.4.6-ac5 (which I had been using for quite a while) does not have this > > problem. > > The fixes you need to run certain HPT cards with certain drives (HPT370 > included) are not in the Linus tree. Its waiting Andre to submit the > relevant stuff on to Linus > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <no.id>]
* Re: Lost interrupt with HPT370 [not found] <no.id> @ 2001-08-13 11:37 ` Alan Cox 2001-08-13 17:23 ` Kevin P. Fleming 2001-08-14 7:49 ` Wojtek Pilorz 0 siblings, 2 replies; 6+ messages in thread From: Alan Cox @ 2001-08-13 11:37 UTC (permalink / raw) To: Kevin P. Fleming; +Cc: Alan Cox, linux-kernel > I have just tried an HPT-366 card with IC35L040VER07 drives (latest DeskStar > 41G ATA-100, although the card is only ATA-66) and could not get them to > even let me create a filesystem without hard locking the machine. This was > using 2.4.8-ac1 and 2.4.7-ac11. I wrote this off to motherboard/IDE card > compatibility (or lack thereof), but could it still be an IDE driver issue? Some HPT cards have problems with certain drives. I believe its a fixed problem in newer boards or on those with updatable firmware if you update the firmware itself Check your drive is in the bad_ata100_5 and bad_ata66_4 list. If not add it then rebuild and retry (drivers/ide/hpt366.c) - and let me know Alan ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Lost interrupt with HPT370 2001-08-13 11:37 ` Alan Cox @ 2001-08-13 17:23 ` Kevin P. Fleming 2001-08-14 7:49 ` Wojtek Pilorz 1 sibling, 0 replies; 6+ messages in thread From: Kevin P. Fleming @ 2001-08-13 17:23 UTC (permalink / raw) To: Alan Cox; +Cc: linux-kernel OK, I've downloaded a beta BIOS update, if that doesn't cure it I'll try adding it to the "bad list" and let y'all know what happens. ----- Original Message ----- From: "Alan Cox" <alan@lxorguk.ukuu.org.uk> To: "Kevin P. Fleming" <kevin@labsysgrp.com> Cc: "Alan Cox" <alan@lxorguk.ukuu.org.uk>; <linux-kernel@vger.kernel.org> Sent: Monday, August 13, 2001 4:37 AM Subject: Re: Lost interrupt with HPT370 > > I have just tried an HPT-366 card with IC35L040VER07 drives (latest DeskStar > > 41G ATA-100, although the card is only ATA-66) and could not get them to > > even let me create a filesystem without hard locking the machine. This was > > using 2.4.8-ac1 and 2.4.7-ac11. I wrote this off to motherboard/IDE card > > compatibility (or lack thereof), but could it still be an IDE driver issue? > > Some HPT cards have problems with certain drives. I believe its a fixed > problem in newer boards or on those with updatable firmware if you update > the firmware itself > > Check your drive is in the bad_ata100_5 and bad_ata66_4 list. If not add > it then rebuild and retry (drivers/ide/hpt366.c) - and let me know > > Alan > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Lost interrupt with HPT370 2001-08-13 11:37 ` Alan Cox 2001-08-13 17:23 ` Kevin P. Fleming @ 2001-08-14 7:49 ` Wojtek Pilorz 1 sibling, 0 replies; 6+ messages in thread From: Wojtek Pilorz @ 2001-08-14 7:49 UTC (permalink / raw) To: Alan Cox; +Cc: Kevin P. Fleming, linux-kernel On Mon, 13 Aug 2001, Alan Cox wrote: > Date: Mon, 13 Aug 2001 12:37:51 +0100 (BST) > From: Alan Cox <alan@lxorguk.ukuu.org.uk> > To: Kevin P. Fleming <kevin@labsysgrp.com> > Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>, linux-kernel@vger.kernel.org > Subject: Re: Lost interrupt with HPT370 > > > I have just tried an HPT-366 card with IC35L040VER07 drives (latest DeskStar > > 41G ATA-100, although the card is only ATA-66) and could not get them to > > even let me create a filesystem without hard locking the machine. This was > > using 2.4.8-ac1 and 2.4.7-ac11. I wrote this off to motherboard/IDE card > > compatibility (or lack thereof), but could it still be an IDE driver issue? > > Some HPT cards have problems with certain drives. I believe its a fixed > problem in newer boards or on those with updatable firmware if you update > the firmware itself > > Check your drive is in the bad_ata100_5 and bad_ata66_4 list. If not add > it then rebuild and retry (drivers/ide/hpt366.c) - and let me know > > Alan > - Alan, What is the effect of putting or not a drive on bad_ata100_5 and bad_ata66_4 ? I am asking as I am using two 30GB IBM DTLA drives connected to HPT370 with kernel 2.2.19+Andre's ide patch, and I have noted that these drives are present on bad_ata66_4 but not on bad_ata100_5 ? Should I inderstand that IBM-DTLA-307030 would not be compatible with HPT 366, but *is* OK with HPT 370 running UDMA-100? I have seen very good performance (15-30 MB/s of transfer with ide.patch, without ide.patch performance is extremally poor at about 2-3 MB/s) and no problems, except one serious problem, which made me feel rather bad; I tried once to measure performance by running two dd command reading from /dev/hde and /dev/hdg, respectively, concurrently; after dd command finished reading HDD lamp stayed on until reboot, after which I lost partition table on one of the disks; before the test I experimented with hdparm which might have been not a good idea ... I have not repeat this test later .. HW: Abit MB with i440BX, FSB 133MHz, HPT 370 on-board, ECC memory 133 MHz, Pentium-III 800MHz (133 MHz FSB) ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2001-08-14 7:46 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-08-12 12:49 Lost interrupt with HPT370 Adam Huffman 2001-08-12 13:57 ` Alan Cox 2001-08-13 5:08 ` Kevin P. Fleming [not found] <no.id> 2001-08-13 11:37 ` Alan Cox 2001-08-13 17:23 ` Kevin P. Fleming 2001-08-14 7:49 ` Wojtek Pilorz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).