* v2410p8 and v2410p9 are no go
@ 2001-09-14 11:44 Mario Mikocevic
2001-09-14 12:03 ` Christoph Hellwig
2001-09-14 12:15 ` Alan Cox
0 siblings, 2 replies; 6+ messages in thread
From: Mario Mikocevic @ 2001-09-14 11:44 UTC (permalink / raw)
To: linux-kernel
Hi,
kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me,
last kernel I tried and it still runs succesfully is 2.4.10-pre4.
dmesg difference is ->
- hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
- hdd: [PTBL] [787/128/63] hdd1
+ hda: no partitions found
+ hdd: no partitions found
it's P4@1.4 w/ 256MiB RAM (HP Vectra).
Any further required info is available on requests.
--
Mario Mikočević (Mozgy)
mozgy at hinet dot hr
My favourite FUBAR ...
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: v2410p8 and v2410p9 are no go
2001-09-14 11:44 v2410p8 and v2410p9 are no go Mario Mikocevic
@ 2001-09-14 12:03 ` Christoph Hellwig
2001-09-14 12:36 ` Kurt Garloff
2001-09-14 12:15 ` Alan Cox
1 sibling, 1 reply; 6+ messages in thread
From: Christoph Hellwig @ 2001-09-14 12:03 UTC (permalink / raw)
To: Mario Mikocevic; +Cc: linux-kernel
In article <20010914134415.A802@danielle.hinet.hr> you wrote:
> Hi,
> kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me,
> last kernel I tried and it still runs succesfully is 2.4.10-pre4.
> dmesg difference is ->
> - hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
> - hdd: [PTBL] [787/128/63] hdd1
> + hda: no partitions found
> + hdd: no partitions found
That looks like the gendisk changes..
Anything special with that machine? (IDE driver?).
Christoph
--
Of course it doesn't work. We've performed a software upgrade.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: v2410p8 and v2410p9 are no go
2001-09-14 11:44 v2410p8 and v2410p9 are no go Mario Mikocevic
2001-09-14 12:03 ` Christoph Hellwig
@ 2001-09-14 12:15 ` Alan Cox
2001-09-14 14:51 ` Mario Mikocevic
1 sibling, 1 reply; 6+ messages in thread
From: Alan Cox @ 2001-09-14 12:15 UTC (permalink / raw)
To: Mario Mikocevic; +Cc: linux-kernel
> kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me,
> last kernel I tried and it still runs succesfully is 2.4.10-pre4.
>
> dmesg difference is ->
>
> - hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
> - hdd: [PTBL] [787/128/63] hdd1
> + hda: no partitions found
> + hdd: no partitions found
>
What IDE chipset are you using. Also do you have ACPI enabled and if so
does it work if you dont compile that in ?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: v2410p8 and v2410p9 are no go
2001-09-14 12:03 ` Christoph Hellwig
@ 2001-09-14 12:36 ` Kurt Garloff
0 siblings, 0 replies; 6+ messages in thread
From: Kurt Garloff @ 2001-09-14 12:36 UTC (permalink / raw)
To: Christoph Hellwig; +Cc: Mario Mikocevic, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 595 bytes --]
On Fri, Sep 14, 2001 at 02:03:39PM +0200, Christoph Hellwig wrote:
> In article <20010914134415.A802@danielle.hinet.hr> Alan wrote:
> > - hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
> > - hdd: [PTBL] [787/128/63] hdd1
> > + hda: no partitions found
> > + hdd: no partitions found
>
> That looks like the gendisk changes..
It is.
Regards,
--
Kurt Garloff <garloff@suse.de> Eindhoven, NL
GPG key: See mail header, key servers Linux kernel development
SuSE GmbH, Nuernberg, DE SCSI, Security
[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: v2410p8 and v2410p9 are no go
2001-09-14 12:15 ` Alan Cox
@ 2001-09-14 14:51 ` Mario Mikocevic
0 siblings, 0 replies; 6+ messages in thread
From: Mario Mikocevic @ 2001-09-14 14:51 UTC (permalink / raw)
To: Alan Cox; +Cc: Mario Mikocevic, linux-kernel
Hi,
> > kernels 2.4.10-pre8 and 2.4.10-pre9 are NoGo for me,
> > last kernel I tried and it still runs succesfully is 2.4.10-pre4.
> >
> > dmesg difference is ->
> >
> > - hda: [PTBL] [5171/240/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
> > - hdd: [PTBL] [787/128/63] hdd1
> > + hda: no partitions found
> > + hdd: no partitions found
> >
>
> What IDE chipset are you using. Also do you have ACPI enabled and if so
> does it work if you dont compile that in ?
# lspci
00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 02)
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82820 820 (Camino 2) Chipset PCI (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 04)
00:1f.1 IDE interface: Intel Corporation 82820 820 (Camino 2) Chipset IDE U100 (rev 04)
00:1f.2 USB Controller: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub A) (rev 04)
00:1f.3 SMBus: Intel Corporation 82820 820 (Camino 2) Chipset SMBus (rev 04)
00:1f.5 Multimedia audio controller: Intel Corporation: Unknown device 2445 (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5144
02:09.0 Multimedia audio controller: Unknown device 5046:1001 (rev 01)
02:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 6c)
# grep ACPI /usr/src/linux/.config
CONFIG_ACPI=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUSMGR=y
CONFIG_ACPI_SYS=y
CONFIG_ACPI_CPU=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_EC is not set
# CONFIG_ACPI_CMBATT is not set
# CONFIG_ACPI_THERMAL is not set
will try without ACPI ..
--
Mario Mikočević (Mozgy)
mozgy at hinet dot hr
My favourite FUBAR ...
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: v2410p8 and v2410p9 are no go
@ 2001-09-14 15:31 Mario Mikocevic
0 siblings, 0 replies; 6+ messages in thread
From: Mario Mikocevic @ 2001-09-14 15:31 UTC (permalink / raw)
To: alan, linux-kernel
Hi,
> What IDE chipset are you using. Also do you have ACPI enabled and if so
> does it work if you dont compile that in ?
Nope, disabled ACPI and still no go, still 'uknown partition table' ..
I'll try locating which patch makes trouble ..
--
Mario Mikočević (Mozgy)
mozgy at hinet dot hr
My favourite FUBAR ...
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2001-09-14 15:31 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-09-14 11:44 v2410p8 and v2410p9 are no go Mario Mikocevic
2001-09-14 12:03 ` Christoph Hellwig
2001-09-14 12:36 ` Kurt Garloff
2001-09-14 12:15 ` Alan Cox
2001-09-14 14:51 ` Mario Mikocevic
2001-09-14 15:31 Mario Mikocevic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).