Re: speed difference between using hard-linked and modular drives?

Re: speed difference between using hard-linked and modular drives?

[Andi Kleen]

Ingo Molnar <mingo@elte.hu> writes:
> 
> we should fix this by trying to allocate continuous physical memory if
> possible, and fall back to vmalloc() only if this allocation fails.

Check -aa. A patch to do that has been in there for some time now.

-Andi

P.S.: It makes a measurable difference with some Oracle benchmarks with
the Qlogic driver.

Re: speed difference between using hard-linked and modular drives?

[Anton Blanchard]

> > we should fix this by trying to allocate continuous physical memory if
> > possible, and fall back to vmalloc() only if this allocation fails.
> 
> Check -aa. A patch to do that has been in there for some time now.

We also need a way to satisfy very large allocations for the hashes (eg
the pagecache hash). On a 32G machine we get awful performance on the
pagecache hash because we can only get an order 9 allocation out of
get_free_pages:

http://samba.org/~anton/linux/pagecache/pagecache_before.png

When switching to vmalloc the hash is large enough to be useful:

http://samba.org/~anton/linux/pagecache/pagecache_after.png

As pointed out by Davem and Ingo we should try and avoid vmalloc here
due to tlb trashing.

Anton

Re: speed difference between using hard-linked and modular drives?

[Rusty Russell]

On 09 Nov 2001 00:00:19 +0100
Andi Kleen <ak@suse.de> wrote:

> Ingo Molnar <mingo@elte.hu> writes:
> > 
> > we should fix this by trying to allocate continuous physical memory if
> > possible, and fall back to vmalloc() only if this allocation fails.
> 
> Check -aa. A patch to do that has been in there for some time now.
> 
> -Andi
> 
> P.S.: It makes a measurable difference with some Oracle benchmarks with
> the Qlogic driver.

Modules have lots of little disadvantages that add up.  The speed penalty
on various platforms is one, the load/unload race complexity is another.

There's a widespread "modules are free!" mentality: they're not, and we
can add complexity trying to make them "free", but it might be wiser to
realize that dynamic adding and deleting from a running kernel is a
problem on par with a pagagble kernel, and may not be the greatest thing
since sliced bread.

Rusty.

Re: speed difference between using hard-linked and modular drives?

[Andi Kleen]

On Fri, Nov 09, 2001 at 11:05:32AM +1100, Anton Blanchard wrote:
> We also need a way to satisfy very large allocations for the hashes (eg
> the pagecache hash). On a 32G machine we get awful performance on the
> pagecache hash because we can only get an order 9 allocation out of
> get_free_pages:
> 
> http://samba.org/~anton/linux/pagecache/pagecache_before.png
> 
> When switching to vmalloc the hash is large enough to be useful:
> 
> http://samba.org/~anton/linux/pagecache/pagecache_after.png
> 
> As pointed out by Davem and Ingo we should try and avoid vmalloc here
> due to tlb trashing.

Sounds like you need a better hash function instead.

-Andi

Re: speed difference between using hard-linked and modular drives?

[Andi Kleen]

On Fri, Nov 09, 2001 at 02:12:15PM +1100, Rusty Russell wrote:
> Modules have lots of little disadvantages that add up.  The speed penalty
> on various platforms is one, the load/unload race complexity is another.

At least for the speed penalty due to TLB thrashing: I would not really
blame modules in this case, it is just an application crying for large
pages support.

-Andi

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Andi Kleen <ak@suse.de>
   Date: Fri, 9 Nov 2001 06:45:40 +0100
   
   Sounds like you need a better hash function instead.
   
Andi, please think about the problem before jumping to conclusions.
N_PAGES / N_CHAINS > 1 in his situation.  A better hash function
cannot help.

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[Andi Kleen]

On Thu, Nov 08, 2001 at 10:04:44PM -0800, David S. Miller wrote:
>    From: Andi Kleen <ak@suse.de>
>    Date: Fri, 9 Nov 2001 06:45:40 +0100
>    
>    Sounds like you need a better hash function instead.
>    
> Andi, please think about the problem before jumping to conclusions.
> N_PAGES / N_CHAINS > 1 in his situation.  A better hash function
> cannot help.

I'm assuming that walking on average 5-10 pages on a lookup is not too big a 
deal, especially when you use prefetch for the list walk. It is a tradeoff
between a big hash table thrashing your cache and a smaller hash table that
can be cached but has on average >1 entries/buckets. At some point the the 
smaller hash table wins, assuming the hash function is evenly distributed.

It would only get bad if the average chain length would become much bigger.

Before jumping to real conclusions it would be interesting to gather
some statistics on Anton's machine, but I suspect he just has an very
unevenly populated table.

-Andi

Re: speed difference between using hard-linked and modular drives?

[Andrew Morton]

Andi Kleen wrote:
> 
> On Thu, Nov 08, 2001 at 10:04:44PM -0800, David S. Miller wrote:
> >    From: Andi Kleen <ak@suse.de>
> >    Date: Fri, 9 Nov 2001 06:45:40 +0100
> >
> >    Sounds like you need a better hash function instead.
> >
> > Andi, please think about the problem before jumping to conclusions.
> > N_PAGES / N_CHAINS > 1 in his situation.  A better hash function
> > cannot help.
> 
> I'm assuming that walking on average 5-10 pages on a lookup is not too big a
> deal, especially when you use prefetch for the list walk. It is a tradeoff
> between a big hash table thrashing your cache and a smaller hash table that
> can be cached but has on average >1 entries/buckets. At some point the the
> smaller hash table wins, assuming the hash function is evenly distributed.
> 
> It would only get bad if the average chain length would become much bigger.
> 
> Before jumping to real conclusions it would be interesting to gather
> some statistics on Anton's machine, but I suspect he just has an very
> unevenly populated table.

I played with that earlier in the year.  Shrinking the hash table
by a factor of eight made no measurable difference to anything on
a Pentium II.  The hash distribution was all over the place though.
Lots of buckets with 1-2 pages, lots with 12-13.

-

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Andi Kleen <ak@suse.de>
   Date: Fri, 9 Nov 2001 07:39:46 +0100
   
   Before jumping to real conclusions it would be interesting to gather
   some statistics on Anton's machine, but I suspect he just has an very
   unevenly populated table.
   
N_PAGES / N_HASHCHAINS was on the order of 9, and the hash chains were
evenly distributed.  He posted URLs to graphs of the hash table chain
lengths.

Franks a lot,
David S. Miller
davem@redhat.com

   

Re: speed difference between using hard-linked and modular drives?

[Andrew Morton]

"David S. Miller" wrote:
> 
>    From: Andrew Morton <akpm@zip.com.au>
>    Date: Thu, 08 Nov 2001 22:54:30 -0800
> 
>    I played with that earlier in the year.  Shrinking the hash table
>    by a factor of eight made no measurable difference to anything on
>    a Pentium II.  The hash distribution was all over the place though.
>    Lots of buckets with 1-2 pages, lots with 12-13.
> 
> What is the distribution when you don't shrink the hash
> table?
> 

Well on my setup, there are more hash buckets than there are
pages in the system.  So - basically empty.  If memory serves
me, never more than two pages in a bucket.

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Andi Kleen <ak@suse.de>
   Date: Fri, 9 Nov 2001 07:39:46 +0100
   
   I'm assuming that walking on average 5-10 pages on a lookup is not
   too big a deal, especially when you use prefetch for the list walk.

Oh no, not this again...

It _IS_ a big deal.  Fetching _ONE_ hash chain cache line
is always going to be cheaper than fetching _FIVE_ to _TEN_
page struct cache lines while walking the list.

Even if prefetch would kill all of this overhead (sorry, it won't), it
is _DUMB_ and _STUPID_ to bring those _FIVE_ to _TEN_ cache lines into
the processor just to lookup _ONE_ page.

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Andrew Morton <akpm@zip.com.au>
   Date: Thu, 08 Nov 2001 22:54:30 -0800
   
   I played with that earlier in the year.  Shrinking the hash table
   by a factor of eight made no measurable difference to anything on
   a Pentium II.  The hash distribution was all over the place though.
   Lots of buckets with 1-2 pages, lots with 12-13.

What is the distribution when you don't shrink the hash
table?

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Andrew Morton <akpm@zip.com.au>
   Date: Thu, 08 Nov 2001 23:16:08 -0800
   
   Well on my setup, there are more hash buckets than there are
   pages in the system.  So - basically empty.  If memory serves
   me, never more than two pages in a bucket.

Ok, this is what I expected.  The function is tuned for
having N_HASH_CHAINS being roughly equal to N_PAGES.

If you want to experiment with smaller hash tables, there
are some hacks in the FreeBSD sources that choose a different "salt"
per inode.  You xor the salt into the hash for each page on that
inode.  Something like this...

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[Andrew Morton]

Ingo Molnar wrote:
> 
> On Thu, 8 Nov 2001, Andrew Morton wrote:
> 
> > Well on my setup, there are more hash buckets than there are pages in
> > the system.  So - basically empty.  If memory serves me, never more
> > than two pages in a bucket.
> 
> how much RAM and how many buckets are there on your system?
> 

urgh.  It was ages ago.  I shouldn't have stuck my head up ;)

I guess it was 256 megs:

Kernel command line: ...  mem=256m
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)

And that's one entry per page, yes?

I ended up concluding that

a) The hash is sucky and
b) Except for certain specialised workloads, a lookup is usually
   associated with a big memory copy, so none of it matters and
c) given b), the page cache hashtable is on the wrong side of the
   size/space tradeoff :)

-

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Andrew Morton <akpm@zip.com.au>
   Date: Thu, 08 Nov 2001 23:35:04 -0800

   b) Except for certain specialised workloads, a lookup is usually
      associated with a big memory copy, so none of it matters and

I disagree, cache pollution always matters.  Especially, if the cpu
does memcpy's using cache-bypass-on-miss.

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[Ingo Molnar]

On Thu, 8 Nov 2001, Andrew Morton wrote:

> Well on my setup, there are more hash buckets than there are pages in
> the system.  So - basically empty.  If memory serves me, never more
> than two pages in a bucket.

how much RAM and how many buckets are there on your system?

	Ingo

Re: speed difference between using hard-linked and modular drives?

[Helge Hafting]

Rusty Russell wrote:

> Modules have lots of little disadvantages that add up.  The speed penalty
> on various platforms is one, the load/unload race complexity is another.
> 
Races can be fixed.  (Isn't that one of the things considered for 2.5?)

Speed penalties on various platforms is there to stay, so you simply
have to weigh that against having more swappable RAM.

I use the following rules of thumb:

1. Modules only for seldom-used devices.  A module for
   the mouse is no use if you do all your work in X.  
   There's simply no gain from a module that never unloads.
   A seldom used fs may be modular though.  I rarely
   use cd's, so isofs is a module on my machine.
2. No modules for high-speed stuff like harddisks and network,
   that's where you might feel the slowdown.  Low-speed stuff
   like floppy and cdrom drivers are modular though.

Helge Hafting

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Alan Cox <alan@lxorguk.ukuu.org.uk>
   Date: Fri, 9 Nov 2001 12:59:09 +0000 (GMT)

   we need a CONFIG option for it

I think a boot time commandline option is more appropriate
for something like this.

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[Alan Cox]

> Oh no, not this again...
> 
> It _IS_ a big deal.  Fetching _ONE_ hash chain cache line
> is always going to be cheaper than fetching _FIVE_ to _TEN_
> page struct cache lines while walking the list.

Big picture time. What costs more - the odd five cache line hit or swapping
200Kbytes/second on and off disk ? - thats obviously workload dependant.

Perhaps at some point we need to accept there is a memory/speed tradeoff
throughout the kernel and we need a CONFIG option for it - especially for
the handheld world. I don't want to do lots of I/O on an ipaq, I don't need
big tcp hashes, and I'd rather take a small performance hit.

Re: speed difference between using hard-linked and modular drives?

[Philip Dodd]

>
>    we need a CONFIG option for it
>
> I think a boot time commandline option is more appropriate
> for something like this.

In the light of what was said about embedded systems, I'm not really sure a
boot time option really is the way to go...

Just a thought.

Philip DODD
Sales Engineer
SIVA
Les Fjords - Immeuble Narvik
19 Avenue de Norvège
Z.A. de Courtaboeuf 1
91953 LES ULIS CEDEX
http://www.siva.fr

Re: speed difference between using hard-linked and modular drives?

[Andi Kleen]

On Fri, Nov 09, 2001 at 04:54:55AM -0800, David S. Miller wrote:
>    From: Alan Cox <alan@lxorguk.ukuu.org.uk>
>    Date: Fri, 9 Nov 2001 12:59:09 +0000 (GMT)
> 
>    we need a CONFIG option for it
> 
> I think a boot time commandline option is more appropriate
> for something like this.

Fine if you don't mind an indirect function call pointer somewhere in the TCP
hash path.

I'm thinking about adding one that removes the separate time wait 
table. It is not needed for desktops because they should have little
or no time-wait sockets. also it should throttle the hash table
sizing aggressively; e.g. 256-512 buckets should be more than enough
for a client. 

BTW I noticed that 1/4 of the big hash table is not used on SMP. The
time wait buckets share the locks of the lower half, so the spinlocks
in the upper half are never used. What would you think about splitting
the table and not putting spinlocks in the time-wait range?


-Andi

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Andi Kleen <ak@suse.de>
   Date: Fri, 9 Nov 2001 14:17:55 +0100

   Fine if you don't mind an indirect function call pointer somewhere in the TCP
   hash path.
   
The hashes are sized at boot time, we can just reduce
the size when the boot time option says "small machine"
or whatever.

Why in the world do we need indirection function call pointers
in TCP to handle that?

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: "Philip Dodd" <smpcomputing@free.fr>
   Date: Fri, 9 Nov 2001 14:15:32 +0100

   > I think a boot time commandline option is more appropriate
   > for something like this.
   
   In the light of what was said about embedded systems, I'm not really sure a
   boot time option really is the way to go...

All the hash tables in question are allocated dynamically,
we size them at boot time, the memory is not consumed until
the kernel begins executing.  So a boottime option would be
just fine.

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[Andi Kleen]

On Fri, Nov 09, 2001 at 05:25:54AM -0800, David S. Miller wrote:
> Why in the world do we need indirection function call pointers
> in TCP to handle that?

To handle the case of not having a separate TIME-WAIT table
(sorry for being unclear). Or alternatively several conditionals. 

-Andi

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Andi Kleen <ak@suse.de>
   Date: Fri, 9 Nov 2001 14:39:30 +0100

   On Fri, Nov 09, 2001 at 05:25:54AM -0800, David S. Miller wrote:
   > Why in the world do we need indirection function call pointers
   > in TCP to handle that?
   
   To handle the case of not having a separate TIME-WAIT table
   (sorry for being unclear). Or alternatively several conditionals. 
   
The TIME-WAIT half of the hash table is most useful on
clients actually.

I mean, just double the amount you "downsize" the TCP established
hash table if it bothers you that much.

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[Mike Fedyk]

On Fri, Nov 09, 2001 at 05:26:50AM -0800, David S. Miller wrote:
>    From: "Philip Dodd" <smpcomputing@free.fr>
>    Date: Fri, 9 Nov 2001 14:15:32 +0100
> 
>    > I think a boot time commandline option is more appropriate
>    > for something like this.
>    
>    In the light of what was said about embedded systems, I'm not really sure a
>    boot time option really is the way to go...
> 
> All the hash tables in question are allocated dynamically,
> we size them at boot time, the memory is not consumed until
> the kernel begins executing.  So a boottime option would be
> just fine.

How much is this code going to affect the kernel image size?

Re: speed difference between using hard-linked and modular drives?

[Anton Blanchard]

 
Hi,

> I'm assuming that walking on average 5-10 pages on a lookup is not too big a 
> deal, especially when you use prefetch for the list walk. It is a tradeoff
> between a big hash table thrashing your cache and a smaller hash table that
> can be cached but has on average >1 entries/buckets. At some point the the 
> smaller hash table wins, assuming the hash function is evenly distributed.
> 
> It would only get bad if the average chain length would become much bigger.
> 
> Before jumping to real conclusions it would be interesting to gather
> some statistics on Anton's machine, but I suspect he just has an very
> unevenly populated table.

You can find the raw data here:

http://samba.org/~anton/linux/pagecache/pagecache_data_gfp.gz
http://samba.org/~anton/linux/pagecache/pagecache_data_vmalloc.gz

You can see the average depth of the get_free_page hash is way too deep.
I agree there are a lot of pagecache pages (17GB in the gfp test and 21GB
in the vmalloc test), but we have to make use of the 32GB of RAM :)

I did some experimentation with prefetch and I dont think it will gain
you anything here. We need to issue the prefetch many cycles before
using the data which we cannot do when walking the chain.

Anton

Re: speed difference between using hard-linked and modular drives?

[Andi Kleen]

> You can see the average depth of the get_free_page hash is way too deep.
> I agree there are a lot of pagecache pages (17GB in the gfp test and 21GB
> in the vmalloc test), but we have to make use of the 32GB of RAM :)

Thanks for the information. I guess the fix for your case would be then
to use the bootmem allocator for allocating the page table hash.
It should have no problems with very large continuous tables, assuming
you have the (physically continuous) memory.

Another possibility would be to switch to some tree/skiplist, but that's 
probably too radical and may have other problems on smaller boxes.

-Andi

Re: speed difference between using hard-linked and modular drives?

[Anton Blanchard]

 
Hi,

> It _IS_ a big deal.  Fetching _ONE_ hash chain cache line
> is always going to be cheaper than fetching _FIVE_ to _TEN_
> page struct cache lines while walking the list.

Exactly, the reason I found the pagecache hash was too small was because
__find_page_nolock was one of the worst offenders when doing zero copy
web serving of a large dataset.

> Even if prefetch would kill all of this overhead (sorry, it won't), it
> is _DUMB_ and _STUPID_ to bring those _FIVE_ to _TEN_ cache lines into
> the processor just to lookup _ONE_ page.

Yes you cant expect prefetch to help you when you use the data 10
instructions after you issue the prefetch. (ie walking the hash chain)

Anton

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Anton Blanchard <anton@samba.org>
   Date: Sat, 10 Nov 2001 15:56:03 +1100
   
   You can see the average depth of the get_free_page hash is way too deep.
   I agree there are a lot of pagecache pages (17GB in the gfp test and 21GB
   in the vmalloc test), but we have to make use of the 32GB of RAM :)

Anton, are you bored?  :-) If so, could you test out the patch
below on your ppc64 box?  It does the "page hash table via bootmem"
thing.  It is against 2.4.15-pre2

The ppc64 specific bits you'll need to do, but they should
be very straight forward.

It also fixes a really stupid bug in the bootmem allocator.
If the bootmem area starts in some unaligned address, the
"align" argument to the bootmem allocator isn't honored.

--- ./arch/alpha/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/alpha/mm/init.c	Sat Nov 10 01:49:56 2001
@@ -23,6 +23,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -360,6 +361,7 @@
 mem_init(void)
 {
 	max_mapnr = num_physpages = max_low_pfn;
+	page_cache_init(count_free_bootmem());
 	totalram_pages += free_all_bootmem();
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
--- ./arch/alpha/mm/numa.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/alpha/mm/numa.c	Sat Nov 10 01:52:27 2001
@@ -15,6 +15,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/hwrpb.h>
 #include <asm/pgalloc.h>
@@ -359,8 +360,13 @@
 	extern char _text, _etext, _data, _edata;
 	extern char __init_begin, __init_end;
 	extern unsigned long totalram_pages;
-	unsigned long nid, i;
+	unsigned long nid, i, num_free_bootmem_pages;
 	mem_map_t * lmem_map;
+
+	num_free_bootmem_pages = 0;
+	for (nid = 0; nid < numnodes; nid++)
+		num_free_bootmem_pages += count_free_bootmem_node(NODE_DATA(nid));
+	page_cache_init(num_free_bootmem_pages);
 
 	high_memory = (void *) __va(max_mapnr <<PAGE_SHIFT);
 
--- ./arch/arm/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/arm/mm/init.c	Sat Nov 10 01:52:34 2001
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/blk.h>
+#include <linux/pagemap.h>
 
 #include <asm/segment.h>
 #include <asm/mach-types.h>
@@ -594,6 +595,7 @@
 void __init mem_init(void)
 {
 	unsigned int codepages, datapages, initpages;
+	unsigned long num_free_bootmem_pages;
 	int i, node;
 
 	codepages = &_etext - &_text;
@@ -608,6 +610,11 @@
 	 */
 	if (meminfo.nr_banks != 1)
 		create_memmap_holes(&meminfo);
+
+	num_free_bootmem_pages = 0;
+	for (node = 0; node < numnodes; node++)
+		num_free_bootmem_pages += count_free_bootmem_node(NODE_DATA(node));
+	page_cache_init(num_free_bootmem_pages);
 
 	/* this will put all unused low memory onto the freelists */
 	for (node = 0; node < numnodes; node++) {
--- ./arch/i386/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/i386/mm/init.c	Sat Nov 10 01:53:43 2001
@@ -455,6 +455,8 @@
 #endif
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
+	page_cache_init(count_free_bootmem());
+
 	/* clear the zero-page */
 	memset(empty_zero_page, 0, PAGE_SIZE);
 
--- ./arch/m68k/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/m68k/mm/init.c	Sat Nov 10 01:54:47 2001
@@ -20,6 +20,7 @@
 #ifdef CONFIG_BLK_DEV_RAM
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
@@ -135,6 +136,8 @@
 	if (MACH_IS_ATARI)
 		atari_stram_mem_init_hook();
 #endif
+
+	page_cache_init(count_free_bootmem());
 
 	/* this will put all memory onto the freelists */
 	totalram_pages = free_all_bootmem();
--- ./arch/mips/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/mips/mm/init.c	Sat Nov 10 01:55:09 2001
@@ -28,6 +28,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/bootinfo.h>
 #include <asm/cachectl.h>
@@ -203,6 +204,8 @@
 
 	max_mapnr = num_physpages = max_low_pfn;
 	high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages.  */
--- ./arch/ppc/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/ppc/mm/init.c	Sat Nov 10 01:57:34 2001
@@ -34,6 +34,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>		/* for initrd_* */
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -462,6 +463,8 @@
 
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 	num_physpages = max_mapnr;	/* RAM is assumed contiguous */
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 
--- ./arch/sparc/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/sparc/mm/init.c	Sat Nov 10 01:59:48 2001
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/segment.h>
@@ -434,6 +435,8 @@
 
 	max_mapnr = last_valid_pfn - (phys_base >> PAGE_SHIFT);
 	high_memory = __va(max_low_pfn << PAGE_SHIFT);
+
+	page_cache_init(count_free_bootmem());
 
 #ifdef DEBUG_BOOTMEM
 	prom_printf("mem_init: Calling free_all_bootmem().\n");
--- ./arch/sparc64/mm/init.c.~1~	Fri Nov  9 18:42:08 2001
+++ ./arch/sparc64/mm/init.c	Sat Nov 10 02:00:23 2001
@@ -16,6 +16,7 @@
 #include <linux/blk.h>
 #include <linux/swap.h>
 #include <linux/swapctl.h>
+#include <linux/pagemap.h>
 
 #include <asm/head.h>
 #include <asm/system.h>
@@ -1584,6 +1585,8 @@
 
 	max_mapnr = last_valid_pfn - (phys_base >> PAGE_SHIFT);
 	high_memory = __va(last_valid_pfn << PAGE_SHIFT);
+
+	page_cache_init(count_free_bootmem());
 
 	num_physpages = free_all_bootmem() - 1;
 
--- ./arch/sh/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/sh/mm/init.c	Sat Nov 10 01:59:56 2001
@@ -26,6 +26,7 @@
 #endif
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -139,6 +140,7 @@
 void __init mem_init(void)
 {
 	extern unsigned long empty_zero_page[1024];
+	unsigned long num_free_bootmem_pages;
 	int codesize, reservedpages, datasize, initsize;
 	int tmp;
 
@@ -148,6 +150,12 @@
 	/* clear the zero-page */
 	memset(empty_zero_page, 0, PAGE_SIZE);
 	__flush_wback_region(empty_zero_page, PAGE_SIZE);
+
+	num_free_bootmem_pages = count_free_bootmem_node(NODE_DATA(0));
+#ifdef CONFIG_DISCONTIGMEM
+	num_free_bootmem_pages += count_free_bootmem_node(NODE_DATA(1));
+#endif
+	page_cache_init(num_free_bootmem_pages);
 
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem_node(NODE_DATA(0));
--- ./arch/s390/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/s390/mm/init.c	Sat Nov 10 01:57:56 2001
@@ -186,6 +186,8 @@
         /* clear the zero-page */
         memset(empty_zero_page, 0, PAGE_SIZE);
 
+	page_cache_init(count_free_bootmem());
+
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem();
 
--- ./arch/ia64/mm/init.c.~1~	Fri Nov  9 19:08:02 2001
+++ ./arch/ia64/mm/init.c	Sat Nov 10 01:54:20 2001
@@ -13,6 +13,7 @@
 #include <linux/reboot.h>
 #include <linux/slab.h>
 #include <linux/swap.h>
+#include <linux/pagemap.h>
 
 #include <asm/bitops.h>
 #include <asm/dma.h>
@@ -406,6 +407,8 @@
 
 	max_mapnr = max_low_pfn;
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 
--- ./arch/mips64/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/mips64/mm/init.c	Sat Nov 10 01:55:30 2001
@@ -25,6 +25,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/bootinfo.h>
 #include <asm/cachectl.h>
@@ -396,6 +397,8 @@
 
 	max_mapnr = num_physpages = max_low_pfn;
 	high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages.  */
--- ./arch/mips64/sgi-ip27/ip27-memory.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/mips64/sgi-ip27/ip27-memory.c	Sat Nov 10 02:02:33 2001
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 #include <linux/bootmem.h>
 #include <linux/swap.h>
+#include <linux/pagemap.h>
 
 #include <asm/page.h>
 #include <asm/bootinfo.h>
@@ -277,6 +278,11 @@
 	num_physpages = numpages;	/* memory already sized by szmem */
 	max_mapnr = pagenr;		/* already found during paging_init */
 	high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
+
+	tmp = 0;
+	for (nid = 0; nid < numnodes; nid++)
+		tmp += count_free_bootmem_node(NODE_DATA(nid));
+	page_cache_init(tmp);
 
 	for (nid = 0; nid < numnodes; nid++) {
 
--- ./arch/parisc/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/parisc/mm/init.c	Sat Nov 10 01:57:11 2001
@@ -17,6 +17,7 @@
 #include <linux/pci.h>		/* for hppa_dma_ops and pcxl_dma_ops */
 #include <linux/swap.h>
 #include <linux/unistd.h>
+#include <linux/pagemap.h>
 
 #include <asm/pgalloc.h>
 
@@ -48,6 +49,8 @@
 {
 	max_mapnr = num_physpages = max_low_pfn;
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 	printk("Memory: %luk available\n", totalram_pages << (PAGE_SHIFT-10));
--- ./arch/cris/mm/init.c.~1~	Sun Oct 21 02:47:53 2001
+++ ./arch/cris/mm/init.c	Sat Nov 10 01:53:10 2001
@@ -95,6 +95,7 @@
 #include <linux/swap.h>
 #include <linux/smp.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/segment.h>
@@ -366,6 +367,8 @@
 
 	max_mapnr = num_physpages = max_low_pfn - min_low_pfn;
  
+	page_cache_init(count_free_bootmem());
+
 	/* this will put all memory onto the freelists */
         totalram_pages = free_all_bootmem();
 
--- ./arch/s390x/mm/init.c.~1~	Fri Nov  9 19:08:02 2001
+++ ./arch/s390x/mm/init.c	Sat Nov 10 01:58:14 2001
@@ -198,6 +198,8 @@
         /* clear the zero-page */
         memset(empty_zero_page, 0, PAGE_SIZE);
 
+        page_cache_init(count_free_bootmem());
+
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem();
 
--- ./include/linux/bootmem.h.~1~	Fri Nov  9 19:35:08 2001
+++ ./include/linux/bootmem.h	Sat Nov 10 02:33:45 2001
@@ -43,11 +43,13 @@
 #define alloc_bootmem_low_pages(x) \
 	__alloc_bootmem((x), PAGE_SIZE, 0)
 extern unsigned long __init free_all_bootmem (void);
+extern unsigned long __init count_free_bootmem (void);
 
 extern unsigned long __init init_bootmem_node (pg_data_t *pgdat, unsigned long freepfn, unsigned long startpfn, unsigned long endpfn);
 extern void __init reserve_bootmem_node (pg_data_t *pgdat, unsigned long physaddr, unsigned long size);
 extern void __init free_bootmem_node (pg_data_t *pgdat, unsigned long addr, unsigned long size);
 extern unsigned long __init free_all_bootmem_node (pg_data_t *pgdat);
+extern unsigned long __init count_free_bootmem_node (pg_data_t *pgdat);
 extern void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal);
 #define alloc_bootmem_node(pgdat, x) \
 	__alloc_bootmem_node((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
--- ./init/main.c.~1~	Fri Nov  9 19:08:11 2001
+++ ./init/main.c	Sat Nov 10 04:58:16 2001
@@ -597,7 +597,6 @@
 	proc_caches_init();
 	vfs_caches_init(mempages);
 	buffer_init(mempages);
-	page_cache_init(mempages);
 #if defined(CONFIG_ARCH_S390)
 	ccwcache_init();
 #endif
--- ./mm/filemap.c.~1~	Fri Nov  9 19:08:11 2001
+++ ./mm/filemap.c	Sat Nov 10 05:15:16 2001
@@ -24,6 +24,7 @@
 #include <linux/mm.h>
 #include <linux/iobuf.h>
 #include <linux/compiler.h>
+#include <linux/bootmem.h>
 
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
@@ -2929,28 +2930,48 @@
 	goto unlock;
 }
 
+/* This is called from the arch specific mem_init routine.
+ * It is done right before free_all_bootmem (or NUMA equivalent).
+ *
+ * The mempages arg is the number of pages free_all_bootmem is
+ * going to liberate, or a close approximation.
+ *
+ * We have to use bootmem because on huge systems (ie. 16GB ram)
+ * get_free_pages cannot give us a large enough allocation.
+ */
 void __init page_cache_init(unsigned long mempages)
 {
-	unsigned long htable_size, order;
+	unsigned long htable_size, real_size;
 
 	htable_size = mempages;
 	htable_size *= sizeof(struct page *);
-	for(order = 0; (PAGE_SIZE << order) < htable_size; order++)
+
+	for (real_size = 1UL; real_size < htable_size; real_size <<= 1UL)
 		;
 
 	do {
-		unsigned long tmp = (PAGE_SIZE << order) / sizeof(struct page *);
+		unsigned long tmp = (real_size / sizeof(struct page *));
+		unsigned long align;
 
 		page_hash_bits = 0;
 		while((tmp >>= 1UL) != 0UL)
 			page_hash_bits++;
+		
+		align = real_size;
+		if (align > (4UL * 1024UL * 1024UL))
+			align = (4UL * 1024UL * 1024UL);
+
+		page_hash_table = __alloc_bootmem(real_size, align,
+						  __pa(MAX_DMA_ADDRESS));
+
+		/* Perhaps the alignment was too strict. */
+		if (page_hash_table == NULL)
+			page_hash_table = alloc_bootmem(real_size);
+	} while (page_hash_table == NULL &&
+		 (real_size >>= 1UL) >= PAGE_SIZE);
 
-		page_hash_table = (struct page **)
-			__get_free_pages(GFP_ATOMIC, order);
-	} while(page_hash_table == NULL && --order > 0);
-
-	printk("Page-cache hash table entries: %d (order: %ld, %ld bytes)\n",
-	       (1 << page_hash_bits), order, (PAGE_SIZE << order));
+	printk("Page-cache hash table entries: %d (%ld bytes)\n",
+	       (1 << page_hash_bits), real_size);
 	if (!page_hash_table)
 		panic("Failed to allocate page hash table\n");
 	memset((void *)page_hash_table, 0, PAGE_HASH_SIZE * sizeof(struct page *));

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: "David S. Miller" <davem@redhat.com>
   Date: Sat, 10 Nov 2001 05:29:17 -0800 (PST)

   Anton, are you bored?  :-) If so, could you test out the patch
   below on your ppc64 box?  It does the "page hash table via bootmem"
   thing.  It is against 2.4.15-pre2

Erm, ignore this patch, it was incomplete, I'll diff it up
properly.  Sorry...

Franks a lot,
David S. Miller
davem@redhat.com

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

Ok, this should be a working patch, try this one :-)

diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/alpha/mm/init.c linux/arch/alpha/mm/init.c
--- vanilla/linux/arch/alpha/mm/init.c	Thu Sep 20 20:02:03 2001
+++ linux/arch/alpha/mm/init.c	Sat Nov 10 01:49:56 2001
@@ -23,6 +23,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -360,6 +361,7 @@
 mem_init(void)
 {
 	max_mapnr = num_physpages = max_low_pfn;
+	page_cache_init(count_free_bootmem());
 	totalram_pages += free_all_bootmem();
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/alpha/mm/numa.c linux/arch/alpha/mm/numa.c
--- vanilla/linux/arch/alpha/mm/numa.c	Sun Aug 12 10:38:48 2001
+++ linux/arch/alpha/mm/numa.c	Sat Nov 10 01:52:27 2001
@@ -15,6 +15,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/hwrpb.h>
 #include <asm/pgalloc.h>
@@ -359,8 +360,13 @@
 	extern char _text, _etext, _data, _edata;
 	extern char __init_begin, __init_end;
 	extern unsigned long totalram_pages;
-	unsigned long nid, i;
+	unsigned long nid, i, num_free_bootmem_pages;
 	mem_map_t * lmem_map;
+
+	num_free_bootmem_pages = 0;
+	for (nid = 0; nid < numnodes; nid++)
+		num_free_bootmem_pages += count_free_bootmem_node(NODE_DATA(nid));
+	page_cache_init(num_free_bootmem_pages);
 
 	high_memory = (void *) __va(max_mapnr <<PAGE_SHIFT);
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/arm/mm/init.c linux/arch/arm/mm/init.c
--- vanilla/linux/arch/arm/mm/init.c	Thu Oct 11 09:04:57 2001
+++ linux/arch/arm/mm/init.c	Sat Nov 10 01:52:34 2001
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/blk.h>
+#include <linux/pagemap.h>
 
 #include <asm/segment.h>
 #include <asm/mach-types.h>
@@ -594,6 +595,7 @@
 void __init mem_init(void)
 {
 	unsigned int codepages, datapages, initpages;
+	unsigned long num_free_bootmem_pages;
 	int i, node;
 
 	codepages = &_etext - &_text;
@@ -608,6 +610,11 @@
 	 */
 	if (meminfo.nr_banks != 1)
 		create_memmap_holes(&meminfo);
+
+	num_free_bootmem_pages = 0;
+	for (node = 0; node < numnodes; node++)
+		num_free_bootmem_pages += count_free_bootmem_node(NODE_DATA(node));
+	page_cache_init(num_free_bootmem_pages);
 
 	/* this will put all unused low memory onto the freelists */
 	for (node = 0; node < numnodes; node++) {
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/cris/mm/init.c linux/arch/cris/mm/init.c
--- vanilla/linux/arch/cris/mm/init.c	Thu Jul 26 15:10:06 2001
+++ linux/arch/cris/mm/init.c	Sat Nov 10 01:53:10 2001
@@ -95,6 +95,7 @@
 #include <linux/swap.h>
 #include <linux/smp.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/segment.h>
@@ -366,6 +367,8 @@
 
 	max_mapnr = num_physpages = max_low_pfn - min_low_pfn;
  
+	page_cache_init(count_free_bootmem());
+
 	/* this will put all memory onto the freelists */
         totalram_pages = free_all_bootmem();
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/i386/mm/init.c linux/arch/i386/mm/init.c
--- vanilla/linux/arch/i386/mm/init.c	Thu Sep 20 19:59:20 2001
+++ linux/arch/i386/mm/init.c	Sat Nov 10 01:53:43 2001
@@ -455,6 +455,8 @@
 #endif
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
+	page_cache_init(count_free_bootmem());
+
 	/* clear the zero-page */
 	memset(empty_zero_page, 0, PAGE_SIZE);
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/ia64/mm/init.c linux/arch/ia64/mm/init.c
--- vanilla/linux/arch/ia64/mm/init.c	Fri Nov  9 18:39:51 2001
+++ linux/arch/ia64/mm/init.c	Sat Nov 10 01:54:20 2001
@@ -13,6 +13,7 @@
 #include <linux/reboot.h>
 #include <linux/slab.h>
 #include <linux/swap.h>
+#include <linux/pagemap.h>
 
 #include <asm/bitops.h>
 #include <asm/dma.h>
@@ -406,6 +407,8 @@
 
 	max_mapnr = max_low_pfn;
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/m68k/mm/init.c linux/arch/m68k/mm/init.c
--- vanilla/linux/arch/m68k/mm/init.c	Thu Sep 20 20:02:03 2001
+++ linux/arch/m68k/mm/init.c	Sat Nov 10 01:54:47 2001
@@ -20,6 +20,7 @@
 #ifdef CONFIG_BLK_DEV_RAM
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
@@ -135,6 +136,8 @@
 	if (MACH_IS_ATARI)
 		atari_stram_mem_init_hook();
 #endif
+
+	page_cache_init(count_free_bootmem());
 
 	/* this will put all memory onto the freelists */
 	totalram_pages = free_all_bootmem();
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/mips/mm/init.c linux/arch/mips/mm/init.c
--- vanilla/linux/arch/mips/mm/init.c	Wed Jul  4 11:50:39 2001
+++ linux/arch/mips/mm/init.c	Sat Nov 10 01:55:09 2001
@@ -28,6 +28,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/bootinfo.h>
 #include <asm/cachectl.h>
@@ -203,6 +204,8 @@
 
 	max_mapnr = num_physpages = max_low_pfn;
 	high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages.  */
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/mips64/mm/init.c linux/arch/mips64/mm/init.c
--- vanilla/linux/arch/mips64/mm/init.c	Wed Jul  4 11:50:39 2001
+++ linux/arch/mips64/mm/init.c	Sat Nov 10 01:55:30 2001
@@ -25,6 +25,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/bootinfo.h>
 #include <asm/cachectl.h>
@@ -396,6 +397,8 @@
 
 	max_mapnr = num_physpages = max_low_pfn;
 	high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages.  */
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/mips64/sgi-ip27/ip27-memory.c linux/arch/mips64/sgi-ip27/ip27-memory.c
--- vanilla/linux/arch/mips64/sgi-ip27/ip27-memory.c	Sun Sep  9 10:43:02 2001
+++ linux/arch/mips64/sgi-ip27/ip27-memory.c	Sat Nov 10 02:02:33 2001
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 #include <linux/bootmem.h>
 #include <linux/swap.h>
+#include <linux/pagemap.h>
 
 #include <asm/page.h>
 #include <asm/bootinfo.h>
@@ -277,6 +278,11 @@
 	num_physpages = numpages;	/* memory already sized by szmem */
 	max_mapnr = pagenr;		/* already found during paging_init */
 	high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
+
+	tmp = 0;
+	for (nid = 0; nid < numnodes; nid++)
+		tmp += count_free_bootmem_node(NODE_DATA(nid));
+	page_cache_init(tmp);
 
 	for (nid = 0; nid < numnodes; nid++) {
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/parisc/mm/init.c linux/arch/parisc/mm/init.c
--- vanilla/linux/arch/parisc/mm/init.c	Tue Dec  5 12:29:39 2000
+++ linux/arch/parisc/mm/init.c	Sat Nov 10 01:57:11 2001
@@ -17,6 +17,7 @@
 #include <linux/pci.h>		/* for hppa_dma_ops and pcxl_dma_ops */
 #include <linux/swap.h>
 #include <linux/unistd.h>
+#include <linux/pagemap.h>
 
 #include <asm/pgalloc.h>
 
@@ -48,6 +49,8 @@
 {
 	max_mapnr = num_physpages = max_low_pfn;
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 	printk("Memory: %luk available\n", totalram_pages << (PAGE_SHIFT-10));
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/ppc/mm/init.c linux/arch/ppc/mm/init.c
--- vanilla/linux/arch/ppc/mm/init.c	Tue Oct  2 09:12:44 2001
+++ linux/arch/ppc/mm/init.c	Sat Nov 10 01:57:34 2001
@@ -34,6 +34,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/blk.h>		/* for initrd_* */
 #endif
+#include <linux/pagemap.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -462,6 +463,8 @@
 
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 	num_physpages = max_mapnr;	/* RAM is assumed contiguous */
+
+	page_cache_init(count_free_bootmem());
 
 	totalram_pages += free_all_bootmem();
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/s390/mm/init.c linux/arch/s390/mm/init.c
--- vanilla/linux/arch/s390/mm/init.c	Thu Oct 11 09:04:57 2001
+++ linux/arch/s390/mm/init.c	Sat Nov 10 01:57:56 2001
@@ -186,6 +186,8 @@
         /* clear the zero-page */
         memset(empty_zero_page, 0, PAGE_SIZE);
 
+	page_cache_init(count_free_bootmem());
+
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem();
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/s390x/mm/init.c linux/arch/s390x/mm/init.c
--- vanilla/linux/arch/s390x/mm/init.c	Fri Nov  9 18:39:51 2001
+++ linux/arch/s390x/mm/init.c	Sat Nov 10 01:58:14 2001
@@ -198,6 +198,8 @@
         /* clear the zero-page */
         memset(empty_zero_page, 0, PAGE_SIZE);
 
+        page_cache_init(count_free_bootmem());
+
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem();
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/sh/mm/init.c linux/arch/sh/mm/init.c
--- vanilla/linux/arch/sh/mm/init.c	Mon Oct 15 13:36:48 2001
+++ linux/arch/sh/mm/init.c	Sat Nov 10 01:59:56 2001
@@ -26,6 +26,7 @@
 #endif
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -139,6 +140,7 @@
 void __init mem_init(void)
 {
 	extern unsigned long empty_zero_page[1024];
+	unsigned long num_free_bootmem_pages;
 	int codesize, reservedpages, datasize, initsize;
 	int tmp;
 
@@ -148,6 +150,12 @@
 	/* clear the zero-page */
 	memset(empty_zero_page, 0, PAGE_SIZE);
 	__flush_wback_region(empty_zero_page, PAGE_SIZE);
+
+	num_free_bootmem_pages = count_free_bootmem_node(NODE_DATA(0));
+#ifdef CONFIG_DISCONTIGMEM
+	num_free_bootmem_pages += count_free_bootmem_node(NODE_DATA(1));
+#endif
+	page_cache_init(num_free_bootmem_pages);
 
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem_node(NODE_DATA(0));
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/sparc/mm/init.c linux/arch/sparc/mm/init.c
--- vanilla/linux/arch/sparc/mm/init.c	Mon Oct  1 09:19:56 2001
+++ linux/arch/sparc/mm/init.c	Sat Nov 10 05:30:31 2001
@@ -1,4 +1,4 @@
-/*  $Id: init.c,v 1.100 2001/09/21 22:51:47 davem Exp $
+/*  $Id: init.c,v 1.101 2001/11/10 13:30:31 davem Exp $
  *  linux/arch/sparc/mm/init.c
  *
  *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/segment.h>
@@ -434,6 +435,8 @@
 
 	max_mapnr = last_valid_pfn - (phys_base >> PAGE_SHIFT);
 	high_memory = __va(max_low_pfn << PAGE_SHIFT);
+
+	page_cache_init(count_free_bootmem());
 
 #ifdef DEBUG_BOOTMEM
 	prom_printf("mem_init: Calling free_all_bootmem().\n");
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/arch/sparc64/mm/init.c linux/arch/sparc64/mm/init.c
--- vanilla/linux/arch/sparc64/mm/init.c	Tue Oct 30 15:08:11 2001
+++ linux/arch/sparc64/mm/init.c	Sat Nov 10 05:30:31 2001
@@ -1,4 +1,4 @@
-/*  $Id: init.c,v 1.199 2001/10/25 18:48:03 davem Exp $
+/*  $Id: init.c,v 1.201 2001/11/10 13:30:31 davem Exp $
  *  arch/sparc64/mm/init.c
  *
  *  Copyright (C) 1996-1999 David S. Miller (davem@caip.rutgers.edu)
@@ -16,6 +16,7 @@
 #include <linux/blk.h>
 #include <linux/swap.h>
 #include <linux/swapctl.h>
+#include <linux/pagemap.h>
 
 #include <asm/head.h>
 #include <asm/system.h>
@@ -1400,7 +1401,7 @@
 	if (second_alias_page)
 		spitfire_flush_dtlb_nucleus_page(second_alias_page);
 
-	flush_tlb_all();
+	__flush_tlb_all();
 
 	{
 		unsigned long zones_size[MAX_NR_ZONES];
@@ -1584,6 +1585,8 @@
 
 	max_mapnr = last_valid_pfn - (phys_base >> PAGE_SHIFT);
 	high_memory = __va(last_valid_pfn << PAGE_SHIFT);
+
+	page_cache_init(count_free_bootmem());
 
 	num_physpages = free_all_bootmem() - 1;
 
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/include/linux/bootmem.h linux/include/linux/bootmem.h
--- vanilla/linux/include/linux/bootmem.h	Mon Nov  5 12:43:18 2001
+++ linux/include/linux/bootmem.h	Sat Nov 10 02:33:45 2001
@@ -43,11 +43,13 @@
 #define alloc_bootmem_low_pages(x) \
 	__alloc_bootmem((x), PAGE_SIZE, 0)
 extern unsigned long __init free_all_bootmem (void);
+extern unsigned long __init count_free_bootmem (void);
 
 extern unsigned long __init init_bootmem_node (pg_data_t *pgdat, unsigned long freepfn, unsigned long startpfn, unsigned long endpfn);
 extern void __init reserve_bootmem_node (pg_data_t *pgdat, unsigned long physaddr, unsigned long size);
 extern void __init free_bootmem_node (pg_data_t *pgdat, unsigned long addr, unsigned long size);
 extern unsigned long __init free_all_bootmem_node (pg_data_t *pgdat);
+extern unsigned long __init count_free_bootmem_node (pg_data_t *pgdat);
 extern void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal);
 #define alloc_bootmem_node(pgdat, x) \
 	__alloc_bootmem_node((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/init/main.c linux/init/main.c
--- vanilla/linux/init/main.c	Fri Nov  9 18:40:00 2001
+++ linux/init/main.c	Sat Nov 10 04:58:16 2001
@@ -597,7 +597,6 @@
 	proc_caches_init();
 	vfs_caches_init(mempages);
 	buffer_init(mempages);
-	page_cache_init(mempages);
 #if defined(CONFIG_ARCH_S390)
 	ccwcache_init();
 #endif
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/mm/bootmem.c linux/mm/bootmem.c
--- vanilla/linux/mm/bootmem.c	Tue Sep 18 14:10:43 2001
+++ linux/mm/bootmem.c	Sat Nov 10 05:18:53 2001
@@ -154,6 +154,9 @@
 	if (align & (align-1))
 		BUG();
 
+	offset = (bdata->node_boot_start & (align - 1));
+	offset >>= PAGE_SHIFT;
+
 	/*
 	 * We try to allocate bootmem pages above 'goal'
 	 * first, then we try to allocate lower pages.
@@ -165,6 +168,7 @@
 		preferred = 0;
 
 	preferred = ((preferred + align - 1) & ~(align - 1)) >> PAGE_SHIFT;
+	preferred += offset;
 	areasize = (size+PAGE_SIZE-1)/PAGE_SIZE;
 	incr = align >> PAGE_SHIFT ? : 1;
 
@@ -184,7 +188,7 @@
 	fail_block:;
 	}
 	if (preferred) {
-		preferred = 0;
+		preferred = offset;
 		goto restart_scan;
 	}
 	return NULL;
@@ -272,6 +276,28 @@
 	return total;
 }
 
+static unsigned long __init count_free_bootmem_core(pg_data_t *pgdat)
+{
+	bootmem_data_t *bdata = pgdat->bdata;
+	unsigned long i, idx, total;
+
+	if (!bdata->node_bootmem_map) BUG();
+
+	total = 0;
+	idx = bdata->node_low_pfn - (bdata->node_boot_start >> PAGE_SHIFT);
+	for (i = 0; i < idx; i++) {
+		if (!test_bit(i, bdata->node_bootmem_map))
+			total++;
+	}
+
+	/*
+	 * Count the allocator bitmap itself.
+	 */
+	total += ((bdata->node_low_pfn-(bdata->node_boot_start >> PAGE_SHIFT))/8 + PAGE_SIZE-1)/PAGE_SIZE;
+
+	return total;
+}
+
 unsigned long __init init_bootmem_node (pg_data_t *pgdat, unsigned long freepfn, unsigned long startpfn, unsigned long endpfn)
 {
 	return(init_bootmem_core(pgdat, freepfn, startpfn, endpfn));
@@ -292,6 +318,11 @@
 	return(free_all_bootmem_core(pgdat));
 }
 
+unsigned long __init count_free_bootmem_node (pg_data_t *pgdat)
+{
+	return(count_free_bootmem_core(pgdat));
+}
+
 unsigned long __init init_bootmem (unsigned long start, unsigned long pages)
 {
 	max_low_pfn = pages;
@@ -312,6 +343,11 @@
 unsigned long __init free_all_bootmem (void)
 {
 	return(free_all_bootmem_core(&contig_page_data));
+}
+
+unsigned long __init count_free_bootmem (void)
+{
+	return(count_free_bootmem_core(&contig_page_data));
 }
 
 void * __init __alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal)
diff -u --recursive --new-file --exclude=CVS --exclude=.cvsignore vanilla/linux/mm/filemap.c linux/mm/filemap.c
--- vanilla/linux/mm/filemap.c	Fri Nov  9 18:40:00 2001
+++ linux/mm/filemap.c	Sat Nov 10 05:15:16 2001
@@ -24,6 +24,7 @@
 #include <linux/mm.h>
 #include <linux/iobuf.h>
 #include <linux/compiler.h>
+#include <linux/bootmem.h>
 
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
@@ -2929,28 +2930,48 @@
 	goto unlock;
 }
 
+/* This is called from the arch specific mem_init routine.
+ * It is done right before free_all_bootmem (or NUMA equivalent).
+ *
+ * The mempages arg is the number of pages free_all_bootmem is
+ * going to liberate, or a close approximation.
+ *
+ * We have to use bootmem because on huge systems (ie. 16GB ram)
+ * get_free_pages cannot give us a large enough allocation.
+ */
 void __init page_cache_init(unsigned long mempages)
 {
-	unsigned long htable_size, order;
+	unsigned long htable_size, real_size;
 
 	htable_size = mempages;
 	htable_size *= sizeof(struct page *);
-	for(order = 0; (PAGE_SIZE << order) < htable_size; order++)
+
+	for (real_size = 1UL; real_size < htable_size; real_size <<= 1UL)
 		;
 
 	do {
-		unsigned long tmp = (PAGE_SIZE << order) / sizeof(struct page *);
+		unsigned long tmp = (real_size / sizeof(struct page *));
+		unsigned long align;
 
 		page_hash_bits = 0;
 		while((tmp >>= 1UL) != 0UL)
 			page_hash_bits++;
+		
+		align = real_size;
+		if (align > (4UL * 1024UL * 1024UL))
+			align = (4UL * 1024UL * 1024UL);
+
+		page_hash_table = __alloc_bootmem(real_size, align,
+						  __pa(MAX_DMA_ADDRESS));
+
+		/* Perhaps the alignment was too strict. */
+		if (page_hash_table == NULL)
+			page_hash_table = alloc_bootmem(real_size);
+	} while (page_hash_table == NULL &&
+		 (real_size >>= 1UL) >= PAGE_SIZE);
 
-		page_hash_table = (struct page **)
-			__get_free_pages(GFP_ATOMIC, order);
-	} while(page_hash_table == NULL && --order > 0);
-
-	printk("Page-cache hash table entries: %d (order: %ld, %ld bytes)\n",
-	       (1 << page_hash_bits), order, (PAGE_SIZE << order));
+	printk("Page-cache hash table entries: %d (%ld bytes)\n",
+	       (1 << page_hash_bits), real_size);
 	if (!page_hash_table)
 		panic("Failed to allocate page hash table\n");
 	memset((void *)page_hash_table, 0, PAGE_HASH_SIZE * sizeof(struct page *));

Numbers: ext2/ext3/reiser Performance (ext3 is slow)

[Oktay Akbal]

Hello !

On my test to optimize mysql-Performance I noticed, that the sql-bench is
significantly slower when the tables are stored on a partition with
reiserfs than ext2. I assume this is normal due to the overhead of journal
in write-intensiv tasks. I reran the test with ext3 and was shocked how
slow the bench was then. Here are the numbers for my old K6/400 with
scsi-disks.

Time to complete sql-bench

ext2	176min
reiser  203min (+15%)
ext3    310min (+76%)   (first test with 2.4.14-ext3 319min)

I ran all tests multiple times. Since I used the same Kernels this
is not an vm-issue. I tested on 2.4.14, 2.4.14+ext3 and 2.5.15-pre2.
Since the sql-bench is not an pure fs-test the fs should only play a
minor role. +76% time on this test means to mean that either ext3 is
horible slow or has a severe bug.
For those who know sql-bench I say, that test-insert seems to be the worst
case. It shows
Total time: 5880 wallclock secs  for ext2 and 13277 for ext3.
swap was disabled during test.

Anyone has an idea, why this ext3 "fails" at this specific test while on
normal fs-benchmarks it is much better ?

Oktay

Re: Numbers: ext2/ext3/reiser Performance (ext3 is slow)

[arjan]

In article <Pine.LNX.4.40.0111101516050.14500-100000@omega.hbh.net> you wrote:

> Hello !

> Anyone has an idea, why this ext3 "fails" at this specific test while on
> normal fs-benchmarks it is much better ?

ext3 by default imposes stricter ordering than the other journalling
filesystems in order to improve _data_ consistency (as opposed to just
the guarantee of consistent metadata as most other filesystems do).
if you mount the filesystem with

mount -t ext3 -o data=writeback /dev/foo /mnt/bar

will make it use the same level of guarantee as reiserfs does.

mount -t ext3 -o data=journal /dev/foo /mnt/bar

will do FULL data journalling and will also guarantee data integrety after a
crash...

Greetings,
   Arjan van de Ven

Re: Numbers: ext2/ext3/reiser Performance (ext3 is slow)

[Oktay Akbal]

On Sat, 10 Nov 2001 arjan@fenrus.demon.nl wrote:
> ext3 by default imposes stricter ordering than the other journalling
> filesystems in order to improve _data_ consistency (as opposed to just
> the guarantee of consistent metadata as most other filesystems do).
> if you mount the filesystem with
>
> mount -t ext3 -o data=writeback /dev/foo /mnt/bar
>
> will make it use the same level of guarantee as reiserfs does.
>
> mount -t ext3 -o data=journal /dev/foo /mnt/bar

test with writeback and journal a already running. But this will take some
time. as far as i can tell now writeback is really much faster.
The question is, when to use what mode. I would use data=journal on my
CVS-Archive, and maybe writeback on a news-server.
But what to use for an database like mysql ?
Someone mailed me and asked why use a journal for an database ?
Well, I think for speed of reboot after failover or crash.
I don't know if mysql journals data  itself.

Oktay Akbal

Re: Numbers: ext2/ext3/reiser Performance (ext3 is slow)

[Arjan van de Ven]

On Sat, Nov 10, 2001 at 06:41:15PM +0100, Oktay Akbal wrote:

> The question is, when to use what mode. I would use data=journal on my
> CVS-Archive, and maybe writeback on a news-server.

sounds right; add to this that sync NFS mounts also are far better of with
data=journal.

> But what to use for an database like mysql ?

Well you used reiserfs before. data=writeback is equivalent to the
protection reiserfs offers. Big databases such as Oracle do their own
journalling and will make sure transactions are actually on disk before they
finalize the transaction to the requestor. mysql... I'm not sure about, and
it also depends on if it's a mostly-read-only database, a mostly-write
database or a "mixed" one. In the first cases, mounting "sync" with
full journalling will ensure full datasafety; the second case might just be
faster with full journalling (full journalling has IO clustering benefits
for lots of small, random, writes) but for the mixed case it's a matter of
reliablity versus performance.....

Greetings,
   Arjan van de Ven

Re: speed difference between using hard-linked and modular drives?

[Rusty Russell]

On Fri, 09 Nov 2001 12:16:49 +0100
Helge Hafting <helgehaf@idb.hist.no> wrote:

> Rusty Russell wrote:
> 
> > Modules have lots of little disadvantages that add up.  The speed penalty
> > on various platforms is one, the load/unload race complexity is another.
> > 
> Races can be fixed.  (Isn't that one of the things considered for 2.5?)

We get more problems if we go preemptible (some seem to thing that preemption
is "free").  And some races can be fixed by paying more of a speed penalty
(atomic_inc & atomic_dec_and_test for every packet, anyone?).

Hope that clarifies,
Rusty.

[patch] arbitrary size memory allocator, memarea-2.4.15-D6

[Ingo Molnar]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 4757 bytes --]


in the past couple of years the buddy allocator has started to show
limitations that are hurting performance and flexibility.

eg. one of the main reasons why we keep MAX_ORDER at an almost obscenely
high level is the fact that we occasionally have to allocate big,
physically continuous memory areas. We do not realistically expect to be
able to allocate such high-order pages after bootup, still every page
allocation carries the cost of it. And even with MAX_ORDER at 10, large
RAM boxes have hit this limit and are hurting visibly - as witnessed by
Anton. Falling back to vmalloc() is not a high-quality option, due to the
TLB-miss overhead.

If we had an allocator that could handle large, rare but
performance-insensitive allocations, then we could decrease MAX_ORDER back
to 5 or 6, which would result in less cache-footprint and faster operation
of the page allocator.

the attached memarea-2.4.15-D6 patch does just this: it implements a new
'memarea' allocator which uses the buddy allocator data structures without
impacting buddy allocator performance. It has two main entry points:

	struct page * alloc_memarea(unsigned int gfp_mask, unsigned int pages);
	void free_memarea(struct page *area, unsigned int pages);

the main properties of the memarea allocator are:

 - to be an 'unlimited size' allocator: it will find and allocate 100 GB
   of physically continuous memory if that much RAM is available.

 - no alignment or size limitations either, size does not have to be a
   power of 2 like for the buddy allocator, and alignment will be whatever
   constellation the allocator finds. This property ensures that if there
   is a sufficiently sized physically continous piece of RAM available,
   the allocator will find it. The buddy allocator only finds order-2
   aligned and order-2 sized pages.

 - no impact on the performance of the page allocator. (The only (very
   small) effect is the use of list_del_init() instead of list_del() when
   allocating pages. This is insignificant as the initialization will be
   done in two assembly instructions, touching an already present and
   dirty cacheline.)

Obviously, alloc_memarea() can be pretty slow if RAM is getting full, nor
does it guarantee allocation, so for non-boot allocations other backup
mechanizms have to be used, such as vmalloc(). It is not a replacement for
the buddy allocator - it's not intended for frequent use.

right now the memarea allocator is used in one place: to allocate the
pagecache hash table at boot time. [ Anton, it would be nice if you could
check it out on your large-RAM box, does it improve the hash chain
situation? ]

other candidates of alloc_memarea() usage are:

  - module code segment allocation, fall back to vmalloc() if failure.

  - swap map allocation, it uses vmalloc() now.

  - buffer, inode, dentry, TCP hash allocations. (in case we decrease
    MAX_ORDER, which the patch does not do yet.)

  - those funky PCI devices that need some big chunk of physical memory.

  - other uses?

alloc_memarea() tries to optimize away as much as possible from linear
scanning of zone mem-maps, but the worst-case scenario is that it has to
iterate over all pages - which can be ~256K iterations if eg. we search on
a 1 GB box.

possible future improvements:

- alloc_memarea() could zap clean pagecache pages as well.

- if/once reverse pte mappings are added, alloc_memarea() could also
  initiate the swapout of anonymous & dirty pages. These modifications
  would make it pretty likely to succeed if the allocation size is
  realistic.

- possibly add 'alignment' and 'offset' to the __alloc_memarea()
  arguments, to possibly create a given alignment for the memarea, to
  handle really broken hardware and possibly result in better page
  coloring as well.

- if we extended the buddy allocator to have a page-granularity bitmap as
  well, then alloc_memarea() could search for physically continuous page
  areas *much* faster. But this creates a real runtime (and cache
  footprint) overhead in the buddy allocator.

the patch also cleans up the buddy allocator code:

  - cleaned up the zone structure namespace

  - removed the memlist_ defines. (I originally added them to play
    with FIFO vs. LIFO allocation, but now we have settled for the later.)

  - simplified code

  - ( fixed index to be unsigned long in rmqueue(). This enables 64-bit
    systems to have more than 32 TB of RAM in a single zone. [not quite
    realistic, yet, but hey.] )

NOTE: the memarea allocator pieces are in separate chunks and are
completely non-intrusive if the filemap.c change is omitted.

i've tested the patch pretty thoroughly on big and small RAM boxes. The
patch is against 2.4.15-pre3.

Reports, comments, suggestions welcome,

	Ingo

[-- Attachment #2: Type: TEXT/PLAIN, Size: 16147 bytes --]

--- linux/kernel/ksyms.c.orig	Mon Nov 12 15:24:28 2001
+++ linux/kernel/ksyms.c	Mon Nov 12 15:31:59 2001
@@ -91,6 +91,9 @@
 /* internal kernel memory management */
 EXPORT_SYMBOL(_alloc_pages);
 EXPORT_SYMBOL(__alloc_pages);
+EXPORT_SYMBOL(__alloc_memarea);
+EXPORT_SYMBOL(alloc_memarea);
+EXPORT_SYMBOL(free_memarea);
 EXPORT_SYMBOL(alloc_pages_node);
 EXPORT_SYMBOL(__get_free_pages);
 EXPORT_SYMBOL(get_zeroed_page);
--- linux/mm/page_alloc.c.orig	Mon Nov 12 15:05:21 2001
+++ linux/mm/page_alloc.c	Mon Nov 12 15:57:09 2001
@@ -43,18 +43,10 @@
  * for the normal case, giving better asm-code.
  */
 
-#define memlist_init(x) INIT_LIST_HEAD(x)
-#define memlist_add_head list_add
-#define memlist_add_tail list_add_tail
-#define memlist_del list_del
-#define memlist_entry list_entry
-#define memlist_next(x) ((x)->next)
-#define memlist_prev(x) ((x)->prev)
-
 /*
  * Temporary debugging check.
  */
-#define BAD_RANGE(zone,x) (((zone) != (x)->zone) || (((x)-mem_map) < (zone)->zone_start_mapnr) || (((x)-mem_map) >= (zone)->zone_start_mapnr+(zone)->size))
+#define BAD_RANGE(zone,x) (((zone) != (x)->zone) || (((x)-mem_map) < (zone)->start_mapnr) || (((x)-mem_map) >= (zone)->start_mapnr+(zone)->size))
 
 /*
  * Buddy system. Hairy. You really aren't expected to understand this
@@ -92,8 +84,8 @@
 
 	zone = page->zone;
 
-	mask = (~0UL) << order;
-	base = zone->zone_mem_map;
+	mask = ~0UL << order;
+	base = zone->mem_map;
 	page_idx = page - base;
 	if (page_idx & ~mask)
 		BUG();
@@ -105,7 +97,7 @@
 
 	zone->free_pages -= mask;
 
-	while (mask + (1 << (MAX_ORDER-1))) {
+	while (mask != ((~0UL) << (MAX_ORDER-1))) {
 		struct page *buddy1, *buddy2;
 
 		if (area >= zone->free_area + MAX_ORDER)
@@ -125,14 +117,13 @@
 		if (BAD_RANGE(zone,buddy2))
 			BUG();
 
-		memlist_del(&buddy1->list);
+		list_del_init(&buddy1->list);
 		mask <<= 1;
 		area++;
 		index >>= 1;
 		page_idx &= mask;
 	}
-	memlist_add_head(&(base + page_idx)->list, &area->free_list);
-
+	list_add(&(base + page_idx)->list, &area->free_list);
 	spin_unlock_irqrestore(&zone->lock, flags);
 	return;
 
@@ -142,6 +133,11 @@
 	if (in_interrupt())
 		goto back_local_freelist;		
 
+	/*
+	 * Set the page count to 1 here, so that we can
+	 * distinguish local pages from free buddy pages.
+	 */
+	set_page_count(page, 1);
 	list_add(&page->list, &current->local_pages);
 	page->index = order;
 	current->nr_local_pages++;
@@ -150,7 +146,7 @@
 #define MARK_USED(index, order, area) \
 	__change_bit((index) >> (1+(order)), (area)->map)
 
-static inline struct page * expand (zone_t *zone, struct page *page,
+static inline struct page * expand(zone_t *zone, struct page *page,
 	 unsigned long index, int low, int high, free_area_t * area)
 {
 	unsigned long size = 1 << high;
@@ -161,7 +157,7 @@
 		area--;
 		high--;
 		size >>= 1;
-		memlist_add_head(&(page)->list, &(area)->free_list);
+		list_add(&page->list, &area->free_list);
 		MARK_USED(index, high, area);
 		index += size;
 		page += size;
@@ -183,16 +179,16 @@
 	spin_lock_irqsave(&zone->lock, flags);
 	do {
 		head = &area->free_list;
-		curr = memlist_next(head);
+		curr = head->next;
 
 		if (curr != head) {
-			unsigned int index;
+			unsigned long index;
 
-			page = memlist_entry(curr, struct page, list);
+			page = list_entry(curr, struct page, list);
 			if (BAD_RANGE(zone,page))
 				BUG();
-			memlist_del(curr);
-			index = page - zone->zone_mem_map;
+			list_del_init(curr);
+			index = page - zone->mem_map;
 			if (curr_order != MAX_ORDER-1)
 				MARK_USED(index, curr_order, area);
 			zone->free_pages -= 1UL << order;
@@ -256,9 +252,8 @@
 			do {
 				tmp = list_entry(entry, struct page, list);
 				if (tmp->index == order && memclass(tmp->zone, classzone)) {
-					list_del(entry);
+					list_del_init(entry);
 					current->nr_local_pages--;
-					set_page_count(tmp, 1);
 					page = tmp;
 
 					if (page->buffers)
@@ -286,7 +281,7 @@
 		nr_pages = current->nr_local_pages;
 		/* free in reverse order so that the global order will be lifo */
 		while ((entry = local_pages->prev) != local_pages) {
-			list_del(entry);
+			list_del_init(entry);
 			tmp = list_entry(entry, struct page, list);
 			__free_pages_ok(tmp, tmp->index);
 			if (!nr_pages--)
@@ -399,6 +394,232 @@
 	goto rebalance;
 }
 
+#ifndef CONFIG_DISCONTIGMEM
+
+/*
+ * Return the order if a page is part of a free page, or
+ * return -1 otherwise.
+ *
+ * (This function relies on the fact that the only zero-count pages that
+ * have a non-empty page->list are pages of the buddy allocator.)
+ */
+static inline int free_page_order(zone_t *zone, struct page *p)
+{
+	free_area_t *area;
+	struct page *page, *base;
+	unsigned long index0, index, mask;
+	int order;
+
+	base = zone->mem_map;
+	index0 = p - base;
+
+	/*
+	 * First find the highest order free page which this page is part of.
+	 */
+	for (order = MAX_ORDER-1; order >= 0; order--) {
+		area = zone->free_area + order - 1;
+		/*
+		 * eg. for order 4, mask is 0xfffffff0
+		 */
+		mask = ~((1 << order) - 1);
+		index = index0 & mask;
+		page = base + index;
+
+		if (!page_count(page) && !list_empty(&page->list))
+			break;
+	}
+	return order;
+}
+
+/*
+ * Expand a specific page. The normal expand() function returns the
+ * last low-order page from the high-order page.
+ */
+static inline void expand_specific(struct page *page0, zone_t *zone, struct page *bigpage, const int start, free_area_t * area)
+{
+	unsigned long index0, page_idx;
+	struct page *base, *page = NULL;
+	int order = start;
+
+	base = zone->mem_map;
+	index0 = page0 - base;
+	if (!start)
+		BUG();
+	while (order) {
+		struct page *buddy1, *buddy2;
+		area--;
+		order--;
+
+		page_idx = index0 & ~((1 << order)-1);
+		buddy1 = base + (page_idx ^ (1 << order));
+		buddy2 = base + page_idx;
+
+		if (BAD_RANGE(zone,buddy1))
+			BUG();
+		if (BAD_RANGE(zone,buddy2))
+			BUG();
+
+		list_add(&buddy1->list, &area->free_list);
+		MARK_USED(page_idx, order, area);
+		page = buddy2;
+	}
+	if (page != page0)
+		BUG();
+}
+
+/*
+ * Allocate a specific page at a given physical address and update
+ * the buddy allocator data structures accordingly.
+ */
+static void alloc_page_ptr(zone_t *zone, struct page *p)
+{
+	free_area_t *area;
+	struct page *page, *base;
+	unsigned long index0, index, mask;
+	int order;
+
+	base = zone->mem_map;
+	index0 = p - base;
+
+	/*
+	 * First find the highest order free page which this page is part of.
+	 */
+	for (order = MAX_ORDER-1; order >= 1; order--) {
+		area = zone->free_area + order - 1;
+		/*
+		 * eg. for order 4, mask is 0xfffffff0
+		 */
+		mask = ~((1 << order) - 1);
+		index = index0 & mask;
+		page = base + index;
+
+		if (!page_count(page) && !list_empty(&page->list))
+			break;
+	}
+	if (order < 0)
+		BUG();
+	/*
+	 * Break up any possible higher order page the free
+	 * page might be part of.
+	 */
+	if (order > 0) {
+		area = zone->free_area + order;
+		index = index0 & ~((1 << order) -1);
+		page = base + index;
+
+		if (list_empty(&page->list))
+			BUG();
+		list_del_init(&page->list);
+		if (!list_empty(&page->list))
+			BUG();
+		if (order != MAX_ORDER-1)
+			MARK_USED(index, order, area);
+		expand_specific(p, zone, page, order, area);
+	} else {
+		MARK_USED(index0, 0, zone->free_area);
+		list_del_init(&p->list);
+	}
+	zone->free_pages--;
+	if (!list_empty(&p->list))
+		BUG();
+	set_page_count(p, 1);
+}
+
+struct page * __alloc_memarea(unsigned int gfp_mask, unsigned int pages, zonelist_t *zonelist)
+{
+	struct page *p, *p_found = NULL;
+	unsigned int found = 0, order;
+	unsigned long flags;
+	zone_t **z, *zone;
+
+	z = zonelist->zones;
+	zone = *z;
+repeat:
+	spin_lock_irqsave(&zone->lock, flags);
+	if (zone->free_pages < pages)
+		goto next_zone;
+	/*
+	 * We search the zone's mem_map for a range of empty pages:
+	 */
+	for (p = zone->mem_map; p < zone->mem_map + zone->size; p += 1 << order) {
+		order = free_page_order(zone, p);
+		if (order == -1) {
+			found = 0;
+			p_found = NULL;
+			order = 0;
+			continue;
+		}
+		if (!found)
+			p_found = p;
+		found += 1 << order;
+
+		if (found < pages)
+			continue;
+		/*
+		 * Got the area, now remove every page from the
+		 * buddy structures:
+		 */
+		for (p = p_found; p != p_found + pages; p++) {
+			alloc_page_ptr(zone, p);
+			if (free_page_order(zone, p) != -1)
+				BUG();
+		}
+		spin_unlock_irqrestore(&zone->lock, flags);
+
+		return p_found;
+	}
+next_zone:
+	spin_unlock_irqrestore(&zone->lock, flags);
+
+	zone = *(++z);
+	if (zone)
+		goto repeat;
+	return NULL;
+}
+
+/**
+ * alloc_memarea - allocate physically continuous pages.
+ *
+ * The memory area will be PAGE_SIZE aligned. This allocator is able to
+ * allocate arbitrary number of physically continuous pages (which does
+ * not have to be a power of 2), as long as such a free area is available.
+ *
+ * The returned address is a struct page pointer, the allocator is able
+ * to allocate highmem, lowmem and DMA pages as well.
+ *
+ * NOTE: while the allocator is always atomic, it has to search the whole
+ * memory map, so it can be quite slow and is thus not suited for use in
+ * interrupt handlers. It should only be used for initialization-time
+ * allocation of larger memory areas. Also, since the allocator does not
+ * attempt to free any memory to be able to fulfill the allocation request,
+ * the caller either has to make sure the call happens at boot-time, or that
+ * he can fall back to other means of allocation such as vmalloc().
+ *
+ * @gfp_mask: allocation type
+ * @pages: the number of pages to be allocated
+ */
+struct page * alloc_memarea(unsigned int gfp_mask, unsigned int pages)
+{
+	return __alloc_memarea(gfp_mask, pages,
+		contig_page_data.node_zonelists+(gfp_mask & GFP_ZONEMASK));
+}
+
+/**
+ * free_memarea - free a set of physically continuous pages.
+ *
+ * @area: the first page in the area
+ * @pages: size of the area, in pages
+ */
+void free_memarea(struct page *area, unsigned int pages)
+{
+	int i;
+
+	for (i = 0; i < pages; i++)
+		__free_page(area + i);
+}
+
+#endif
+
 /*
  * Common helper functions.
  */
@@ -554,7 +775,7 @@
 				curr = head;
 				nr = 0;
 				for (;;) {
-					curr = memlist_next(curr);
+					curr = curr->next;
 					if (curr == head)
 						break;
 					nr++;
@@ -689,7 +910,7 @@
 		set_page_count(p, 0);
 		SetPageReserved(p);
 		init_waitqueue_head(&p->wait);
-		memlist_init(&p->list);
+		INIT_LIST_HEAD(&p->list);
 	}
 
 	offset = lmem_map - mem_map;	
@@ -706,7 +927,7 @@
 		zone->size = size;
 		zone->name = zone_names[j];
 		zone->lock = SPIN_LOCK_UNLOCKED;
-		zone->zone_pgdat = pgdat;
+		zone->pgdat = pgdat;
 		zone->free_pages = 0;
 		zone->need_balance = 0;
 		if (!size)
@@ -723,9 +944,9 @@
 		zone->pages_low = mask*2;
 		zone->pages_high = mask*3;
 
-		zone->zone_mem_map = mem_map + offset;
-		zone->zone_start_mapnr = offset;
-		zone->zone_start_paddr = zone_start_paddr;
+		zone->mem_map = mem_map + offset;
+		zone->start_mapnr = offset;
+		zone->start_paddr = zone_start_paddr;
 
 		if ((zone_start_paddr >> PAGE_SHIFT) & (zone_required_alignment-1))
 			printk("BUG: wrong zone alignment, it will crash\n");
@@ -742,7 +963,7 @@
 		for (i = 0; ; i++) {
 			unsigned long bitmap_size;
 
-			memlist_init(&zone->free_area[i].free_list);
+			INIT_LIST_HEAD(&zone->free_area[i].free_list);
 			if (i == MAX_ORDER-1) {
 				zone->free_area[i].map = NULL;
 				break;
--- linux/mm/filemap.c.orig	Mon Nov 12 15:05:21 2001
+++ linux/mm/filemap.c	Mon Nov 12 15:25:21 2001
@@ -2931,23 +2931,29 @@
 
 void __init page_cache_init(unsigned long mempages)
 {
-	unsigned long htable_size, order;
+	unsigned long htable_size, order, tmp;
+	struct page *area;
 
 	htable_size = mempages;
 	htable_size *= sizeof(struct page *);
 	for(order = 0; (PAGE_SIZE << order) < htable_size; order++)
 		;
 
-	do {
-		unsigned long tmp = (PAGE_SIZE << order) / sizeof(struct page *);
+	tmp = (PAGE_SIZE << order) / sizeof(struct page *);
 
-		page_hash_bits = 0;
-		while((tmp >>= 1UL) != 0UL)
-			page_hash_bits++;
+	page_hash_bits = 0;
+	while((tmp >>= 1UL) != 0UL)
+		page_hash_bits++;
 
-		page_hash_table = (struct page **)
-			__get_free_pages(GFP_ATOMIC, order);
-	} while(page_hash_table == NULL && --order > 0);
+	/*
+	 * We allocate the optimal-size structure.
+	 * There is something seriously bad wrt. the sizing of the
+	 * hash table if this allocation does not succeed, and we
+	 * want to know about those cases!
+	 */
+	area = alloc_memarea(GFP_KERNEL, 1 << order);
+	if (area)
+		page_hash_table = page_address(area);
 
 	printk("Page-cache hash table entries: %d (order: %ld, %ld bytes)\n",
 	       (1 << page_hash_bits), order, (PAGE_SIZE << order));
--- linux/mm/vmscan.c.orig	Mon Nov 12 15:05:21 2001
+++ linux/mm/vmscan.c	Mon Nov 12 15:25:21 2001
@@ -608,7 +608,7 @@
 {
 	zone_t * first_classzone;
 
-	first_classzone = classzone->zone_pgdat->node_zones;
+	first_classzone = classzone->pgdat->node_zones;
 	while (classzone >= first_classzone) {
 		if (classzone->free_pages > classzone->pages_high)
 			return 0;
--- linux/include/linux/mm.h.orig	Mon Nov 12 15:05:21 2001
+++ linux/include/linux/mm.h	Mon Nov 12 15:25:02 2001
@@ -369,6 +369,11 @@
 extern unsigned long FASTCALL(__get_free_pages(unsigned int gfp_mask, unsigned int order));
 extern unsigned long FASTCALL(get_zeroed_page(unsigned int gfp_mask));
 
+extern struct page * FASTCALL(__alloc_memarea(unsigned int gfp_mask, unsigned int pages, zonelist_t *zonelist));
+extern struct page * FASTCALL(alloc_memarea(unsigned int gfp_mask, unsigned int pages));
+extern void FASTCALL(free_memarea(struct page *area, unsigned int pages));
+
+
 #define __get_free_page(gfp_mask) \
 		__get_free_pages((gfp_mask),0)
 
--- linux/include/linux/mmzone.h.orig	Mon Nov 12 15:05:12 2001
+++ linux/include/linux/mmzone.h	Mon Nov 12 15:13:23 2001
@@ -50,10 +50,10 @@
 	/*
 	 * Discontig memory support fields.
 	 */
-	struct pglist_data	*zone_pgdat;
-	struct page		*zone_mem_map;
-	unsigned long		zone_start_paddr;
-	unsigned long		zone_start_mapnr;
+	struct pglist_data	*pgdat;
+	struct page		*mem_map;
+	unsigned long		start_paddr;
+	unsigned long		start_mapnr;
 
 	/*
 	 * rarely used fields:
@@ -113,7 +113,7 @@
 extern int numnodes;
 extern pg_data_t *pgdat_list;
 
-#define memclass(pgzone, classzone)	(((pgzone)->zone_pgdat == (classzone)->zone_pgdat) \
+#define memclass(pgzone, classzone)	(((pgzone)->pgdat == (classzone)->pgdat) \
 			&& ((pgzone) <= (classzone)))
 
 /*
--- linux/include/asm-alpha/pgtable.h.orig	Mon Nov 12 15:05:19 2001
+++ linux/include/asm-alpha/pgtable.h	Mon Nov 12 15:12:24 2001
@@ -194,7 +194,7 @@
 #define PAGE_TO_PA(page)	((page - mem_map) << PAGE_SHIFT)
 #else
 #define PAGE_TO_PA(page) \
-		((((page)-(page)->zone->zone_mem_map) << PAGE_SHIFT) \
+		((((page)-(page)->zone->mem_map) << PAGE_SHIFT) \
 		+ (page)->zone->zone_start_paddr)
 #endif
 
@@ -213,7 +213,7 @@
 	pte_t pte;								\
 	unsigned long pfn;							\
 										\
-	pfn = ((unsigned long)((page)-(page)->zone->zone_mem_map)) << 32;	\
+	pfn = ((unsigned long)((page)-(page)->zone->mem_map)) << 32;	\
 	pfn += (page)->zone->zone_start_paddr << (32-PAGE_SHIFT);		\
 	pte_val(pte) = pfn | pgprot_val(pgprot);				\
 										\
--- linux/include/asm-mips64/pgtable.h.orig	Mon Nov 12 15:05:12 2001
+++ linux/include/asm-mips64/pgtable.h	Mon Nov 12 15:12:24 2001
@@ -485,7 +485,7 @@
 #define PAGE_TO_PA(page)	((page - mem_map) << PAGE_SHIFT)
 #else
 #define PAGE_TO_PA(page) \
-		((((page)-(page)->zone->zone_mem_map) << PAGE_SHIFT) \
+		((((page)-(page)->zone->mem_map) << PAGE_SHIFT) \
 		+ ((page)->zone->zone_start_paddr))
 #endif
 #define mk_pte(page, pgprot)						\

Re: [patch] arbitrary size memory allocator, memarea-2.4.15-D6

[Jeff Garzik]

Ingo Molnar wrote:
> the attached memarea-2.4.15-D6 patch does just this: it implements a new
> 'memarea' allocator which uses the buddy allocator data structures without
> impacting buddy allocator performance. It has two main entry points:
> 
>         struct page * alloc_memarea(unsigned int gfp_mask, unsigned int pages);
>         void free_memarea(struct page *area, unsigned int pages);
> 
> the main properties of the memarea allocator are:
> 
>  - to be an 'unlimited size' allocator: it will find and allocate 100 GB
>    of physically continuous memory if that much RAM is available.
[...]
> Obviously, alloc_memarea() can be pretty slow if RAM is getting full, nor
> does it guarantee allocation, so for non-boot allocations other backup
> mechanizms have to be used, such as vmalloc(). It is not a replacement for
> the buddy allocator - it's not intended for frequent use.

What's wrong with bigphysarea patch or bootmem?  In the realm of frame
grabbers this is a known and solved problem...

With bootmem you know that (for example) 100GB of physically contiguous
memory is likely to be available; and after boot, memory get fragmented
and the likelihood of alloc_memarea success decreases drastically...
just like bootmem.

Back when I was working on the Matrox Meteor II driver, which requires
as large of a contiguous RAM area as you can give it, bootmem was
suggested as the solution.

IMHO your patch is not needed.  If someone needs a -huge- slab of
memory, then they should allocate it at boot time when they are sure
they will get it.  Otherwise it's an exercise in futility, because they
will be forced to use a fallback method like vmalloc anyway.

	Jeff



-- 
Jeff Garzik      | Only so many songs can be sung
Building 1024    | with two lips, two lungs, and one tongue.
MandrakeSoft     |         - nomeansno

Re: speed difference between using hard-linked and modular drives?

[Rusty Russell]

In message <20011112.152304.39155908.davem@redhat.com> you write:
>    From: Rusty Russell <rusty@rustcorp.com.au>
>    Date: Mon, 12 Nov 2001 20:59:05 +1100
> 
>    (atomic_inc & atomic_dec_and_test for every packet, anyone?).
> 
> We already do pay that price, in skb_release_data() :-)

Sorry, I wasn't clear!  skb_release_data() does an atomic ops on the
skb data region, which is almost certainly on the same CPU.  This is
an atomic op on a global counter for the module, which almost
certainly isn't.

For something which (statistically speaking) never happens (module
unload).

Ouch,
Rusty.
--
Premature optmztion is rt of all evl. --DK

Re: speed difference between using hard-linked and modular drives?

[David S. Miller]

   From: Rusty Russell <rusty@rustcorp.com.au>
   Date: Mon, 12 Nov 2001 20:59:05 +1100

   (atomic_inc & atomic_dec_and_test for every packet, anyone?).

We already do pay that price, in skb_release_data() :-)

Re: [patch] arbitrary size memory allocator, memarea-2.4.15-D6

[Ingo Molnar]

On Mon, 12 Nov 2001, Jeff Garzik wrote:

> What's wrong with bigphysarea patch or bootmem?  In the realm of frame
> grabbers this is a known and solved problem...

bootmem is a limited boot-time only thing, eg. it does not work from
modules. Nor is it generic enough to be eg. highmem-capable. It's not
really a fully capable allocator, i wrote bootmem.c rather as a simple
bootstap allocator, to be used to initialize the real allocator cleanly,
and to be used in some criticial subsystems that initialize before the
main allocator.

bigphysarea is a separate allocator, while alloc_memarea() shares the page
pool with the buddy allocator.

> With bootmem you know that (for example) 100GB of physically
> contiguous memory is likely to be available; and after boot, memory
> get fragmented and the likelihood of alloc_memarea success decreases
> drastically... just like bootmem.

the likelyhood of alloc_memarea() succeeding should be pretty good even on
loaded systems, once the two improvements i mentioned (zap clean pagecache
pages, reverse-flush & zap dirty pages) are added to it. Until then it's
indeed most effective at boot-time and deteriorates afterwards, so it
basically has bootmem's capabilities without most of the limitations of
bootmem.

	Ingo

Re: speed difference between using hard-linked and modular drives?

[David Lang]

Mike the point is that the module count inc/dec would need to be done for
every packet so that when you go to unload you can check the usage value,
so the check is done in the slow path, but the inc/dec is done in the fast
path.

David Lang

 On Mon, 12 Nov 2001, Mike Fedyk wrote:

> Date: Mon, 12 Nov 2001 17:30:14 -0800
> From: Mike Fedyk <mfedyk@matchmail.com>
> To: Rusty Russell <rusty@rustcorp.com.au>
> Cc: David S. Miller <davem@redhat.com>, helgehaf@idb.hist.no,
>      linux-kernel@vger.kernel.org
> Subject: Re: speed difference between using hard-linked and modular
>     drives?
>
> On Tue, Nov 13, 2001 at 10:14:22AM +1100, Rusty Russell wrote:
> > In message <20011112.152304.39155908.davem@redhat.com> you write:
> > >    From: Rusty Russell <rusty@rustcorp.com.au>
> > >    Date: Mon, 12 Nov 2001 20:59:05 +1100
> > >
> > >    (atomic_inc & atomic_dec_and_test for every packet, anyone?).
> > >
> > > We already do pay that price, in skb_release_data() :-)
> >
> > Sorry, I wasn't clear!  skb_release_data() does an atomic ops on the
> > skb data region, which is almost certainly on the same CPU.  This is
> > an atomic op on a global counter for the module, which almost
> > certainly isn't.
> >
> > For something which (statistically speaking) never happens (module
> > unload).
> >
>
> Is this in the fast path or slow path?
>
> If it only happens on (un)load, then there isn't any cost until it's needed...
>
> Mike
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>

Re: speed difference between using hard-linked and modular drives?

[Mike Fedyk]

On Tue, Nov 13, 2001 at 10:14:22AM +1100, Rusty Russell wrote:
> In message <20011112.152304.39155908.davem@redhat.com> you write:
> >    From: Rusty Russell <rusty@rustcorp.com.au>
> >    Date: Mon, 12 Nov 2001 20:59:05 +1100
> > 
> >    (atomic_inc & atomic_dec_and_test for every packet, anyone?).
> > 
> > We already do pay that price, in skb_release_data() :-)
> 
> Sorry, I wasn't clear!  skb_release_data() does an atomic ops on the
> skb data region, which is almost certainly on the same CPU.  This is
> an atomic op on a global counter for the module, which almost
> certainly isn't.
> 
> For something which (statistically speaking) never happens (module
> unload).
>

Is this in the fast path or slow path?

If it only happens on (un)load, then there isn't any cost until it's needed...

Mike

Re: [patch] arbitrary size memory allocator, memarea-2.4.15-D6

[Riley Williams]

Hi Jeff.

> With bootmem you know that (for example) 100GB of physically
> contiguous memory is likely to be available...

Please point me to where you found a machine with 100 Gigabytes of RAM
as I could realy make use of that here...

Best wishes from Riley.

Re: [patch] arbitrary size memory allocator, memarea-2.4.15-D6

[Tom Gall]

Riley Williams wrote:
> 
> Hi Jeff.
> 
> > With bootmem you know that (for example) 100GB of physically
> > contiguous memory is likely to be available...
> 
> Please point me to where you found a machine with 100 Gigabytes of RAM
> as I could realy make use of that here...

Well as an example, the new IBM pSeries p690, and yes it does run Linux.

Will it be 100 Gig of physically contiguous memory? Not necessarily but it
certainly could be.

Now if it would only fit under my desk....

> Best wishes from Riley.

Regards,

Tom

-- 
Tom Gall - [embedded] [PPC64 | PPC32] Code Monkey
Peace, Love &                  "Where's the ka-boom? There was
Linux Technology Center         supposed to be an earth
http://www.ibm.com/linux/ltc/   shattering ka-boom!"
(w) tom_gall@vnet.ibm.com       -- Marvin Martian
(w) 507-253-4558
(h) tgall@rochcivictheatre.org

Re: [patch] arbitrary size memory allocator, memarea-2.4.15-D6

[Anton Blanchard]

 
> Please point me to where you found a machine with 100 Gigabytes of RAM
> as I could realy make use of that here...

Really 128GB isnt that much RAM any more, and the negative effects from
deep hash chains will probably start hitting at ~8GB.

Most non-intel architectures (sparc64, alpha, ppc64) have booted Linux
with > 100GB RAM - we have run 256GB ppc64 machines.

Anton

Re: Numbers: ext2/ext3/reiser Performance (ext3 is slow)

[Stephen C. Tweedie]

Hi,

On Sat, Nov 10, 2001 at 06:41:15PM +0100, Oktay Akbal wrote:

> The question is, when to use what mode. I would use data=journal on my
> CVS-Archive, and maybe writeback on a news-server.
> But what to use for an database like mysql ?

For a database, your application will be specifying the write
ordering explicitly with fsync and/or O_SYNC.  For the filesystem to
try to sync its IO in addition to that is largely redundant.
writeback is entirely appriopriate for databases.

Remember, the key condition that ordered mode guards against is
finding stale blocks in the middle of recently-allocated files.  With
databases, that's not a huge concern.  Except during table creation,
most database writes are into existing allocated blocks; and the data
in the database is normally accessed directly only by a specified
database process, not by normal client processes, so any leaks that do
occur if the database extends its file won't be visible to normal
users.

Cheers,
 Stephen

Re: [patch] arbitrary size memory allocator, memarea-2.4.15-D6

[Eric W. Biederman]

Ingo Molnar <mingo@elte.hu> writes:

> in the past couple of years the buddy allocator has started to show
> limitations that are hurting performance and flexibility.
> 
> eg. one of the main reasons why we keep MAX_ORDER at an almost obscenely
> high level is the fact that we occasionally have to allocate big,
> physically continuous memory areas. We do not realistically expect to be
> able to allocate such high-order pages after bootup, still every page
> allocation carries the cost of it. And even with MAX_ORDER at 10, large
> RAM boxes have hit this limit and are hurting visibly - as witnessed by
> Anton. Falling back to vmalloc() is not a high-quality option, due to the
> TLB-miss overhead.

And additionally vmalloc is nearly as subject to fragmentation as
contiguous memory is.  And on some machines the amount of memory
dedicated to vmalloc is comparatively small. 128M or so.
 
> If we had an allocator that could handle large, rare but
> performance-insensitive allocations, then we could decrease MAX_ORDER back
> to 5 or 6, which would result in less cache-footprint and faster operation
> of the page allocator.

It definitely sounds reasonable.  A special allocator for a hard and
different case. 

> Obviously, alloc_memarea() can be pretty slow if RAM is getting full, nor
> does it guarantee allocation, so for non-boot allocations other backup
> mechanizms have to be used, such as vmalloc(). It is not a replacement for
> the buddy allocator - it's not intended for frequent use.

If we can fix it so that this allocator works well enough that you
don't need a backup allocator but instead when this fails you can
pretty much figure that you couldn't allocate what you are after
then it has a much better chance of being useful.

> alloc_memarea() tries to optimize away as much as possible from linear
> scanning of zone mem-maps, but the worst-case scenario is that it has to
> iterate over all pages - which can be ~256K iterations if eg. we search on
> a 1 GB box.

Hmm.  Can't you assume that buddies are coalesced?
 
> possible future improvements:
> 
> - alloc_memarea() could zap clean pagecache pages as well.
> 
> - if/once reverse pte mappings are added, alloc_memarea() could also
>   initiate the swapout of anonymous & dirty pages. These modifications
>   would make it pretty likely to succeed if the allocation size is
>   realistic.

Except for anonymous pages we have perfectly serviceable reverse
mappings.  They are slow but this is a performance insensitive
allocator so it shouldn't be a big deal to use page->address_space->i_mmap.

But I suspect you could get farther by generating a zone on the fly
for the area you want to free up, and using the normal mechanisms,
or a slight variation on them to free up all the pages in that
area.

> - possibly add 'alignment' and 'offset' to the __alloc_memarea()
>   arguments, to possibly create a given alignment for the memarea, to
>   handle really broken hardware and possibly result in better page
>   coloring as well.
> 
> - if we extended the buddy allocator to have a page-granularity bitmap as
>   well, then alloc_memarea() could search for physically continuous page
>   areas *much* faster. But this creates a real runtime (and cache
>   footprint) overhead in the buddy allocator.

I don't see the need to make this allocator especially fast so I doubt
that would really help.

> i've tested the patch pretty thoroughly on big and small RAM boxes. The
> patch is against 2.4.15-pre3.
> 
> Reports, comments, suggestions welcome,

See above.

Eric

Re: speed difference between using hard-linked and modular drives?

[Keith Owens]

On Sat, 10 Nov 2001 14:35:58 +1100, 
Anton Blanchard <anton@samba.org> wrote:
>Yep all indirect function calls require save and reload of the TOC
>(which is r2):
>
>When calling a function in the kernel from within the kernel (eg printk),
>we dont have to save and reload the TOC:

Same on IA64, indirect function calls have to save R1, load R1 for the
target function from the function descriptor, call the function,
restore R1.  Incidentally that makes a function descriptor on IA64
_two_ words, you cannot save an IA64 function pointer in a long or even
a void * variable.

>Alan Modra tells me the linker does the fixup of nop -> r2 reload. So
>in this case it isnt needed.

IA64 kernels are compiled with -mconstant-gp which tells gcc that
direct calls do not require R1 save/reload, gcc does not even generate
a nop.  However indirect function calls from one part of the kernel to
another still require save and reload code, gcc cannot tell if the call
is local or not.

>However when we do the same printk from a module, the nop is replaced
>with an r2 reload:

Same on IA64, calls from a module into the kernel require R1 save and
reload, even if the call is direct.  So there is some code overhead
when making direct function calls from modules to kernel on IA64, that
overhead disappears when code is linked into the kernel.  Indirect
functions calls always have the overhead, whether in kernel or in
module.

Re: speed difference between using hard-linked and modular drives?

[Anton Blanchard]

 
Hi,

> Is that TOC save and restore just for module code or does it apply to
> all calls through function pointers?
>
> On IA64, R1 (global data pointer) must be saved and restored on all
> calls through function pointers, even if both the caller and callee are
> in the kernel.  You might know that this is a kernel to kernel call but
> gcc does not so it has to assume the worst.  This is not a module
> problem, it affects all indirect function calls.

Yep all indirect function calls require save and reload of the TOC
(which is r2):

std     r2,40(r1)
mtctr   r0
ld      r2,8(r9)
bctrl			# function call

When calling a function in the kernel from within the kernel (eg printk),
we dont have to save and reload the TOC:

000014ec bl .printk
000014f0 nop

Alan Modra tells me the linker does the fixup of nop -> r2 reload. So
in this case it isnt needed.

However when we do the same printk from a module, the nop is replaced
with an r2 reload:

000014ec  bl	0x2f168		# call trampoline
000014f0  ld	r2,40(r1)

And because we have to load the new TOC for the call to printk, it is
done in a small trampoline. (r12 is a pointer to the function descriptor
for printk which contains 3 values, 1. the function address, 2. the TOC,
ignore the 3rd)

0002f168  ld	r12,-32456(r2)
0002f16c  std	r2,40(r1)
0002f170  ld	r0,0(r12)
0002f174  ld	r2,8(r12)
0002f178  mtctr	r0
0002f17c  bctr			# call printk

So the trampoline and r2 restore is the overhead Im talking about :)

btw the trampoline is also required because of the limited range of
relative branches on ppc. So ppc32 also has an overhead except it is
smaller because it doesnt need the TOC juggling.

Anton

Re: speed difference between using hard-linked and modular drives?

[Keith Owens]

On Fri, 9 Nov 2001 10:59:21 +1100, 
Anton Blanchard <anton@samba.org> wrote:
> 
>> > Are there any speed difference between hard-linked device drivers and
>> > their modular counterparts?
>
>Its worse on some architectures that need to pass through a trampoline
>when going between kernel and module (eg ppc). Its even worse on ppc64
>at the moment because we have a local TOC per module which needs to be
>saved and restored.

Is that TOC save and restore just for module code or does it apply to
all calls through function pointers?

On IA64, R1 (global data pointer) must be saved and restored on all
calls through function pointers, even if both the caller and callee are
in the kernel.  You might know that this is a kernel to kernel call but
gcc does not so it has to assume the worst.  This is not a module
problem, it affects all indirect function calls.

Re: speed difference between using hard-linked and modular drives?

[Anton Blanchard]

 
> > Are there any speed difference between hard-linked device drivers and
> > their modular counterparts?
> 
> minimal. a few instructions per IO.

Its worse on some architectures that need to pass through a trampoline
when going between kernel and module (eg ppc). Its even worse on ppc64
at the moment because we have a local TOC per module which needs to be
saved and restored.

Anton

Re: speed difference between using hard-linked and modular drives?

[Robert Love]

On Thu, 2001-11-08 at 11:01, Roy Sigurd Karlsbakk wrote:
> Are there any speed difference between hard-linked device drivers and
> their modular counterparts?

On top of what Ingo said, there is also a slightly larger (very slight)
memory footprint due to some of the module code that isn't included in
in-kernel components.  For example, the __exit functions aren't needed
if the driver is not a module.

	Robert Love

Re: speed difference between using hard-linked and modular drives?

[Ingo Molnar]

On Thu, 8 Nov 2001, Ingo Molnar wrote:

> > Are there any speed difference between hard-linked device drivers and
> > their modular counterparts?
>
> minimal. a few instructions per IO.

Arjan pointed out that there is also the cost of TLB misses due to
vmalloc()-ing module libraries, which can be as high as a 5% slowdown.

we should fix this by trying to allocate continuous physical memory if
possible, and fall back to vmalloc() only if this allocation fails.

	Ingo

Re: speed difference between using hard-linked and modular drives?

[Ingo Molnar]

On Thu, 8 Nov 2001, Roy Sigurd Karlsbakk wrote:

> Are there any speed difference between hard-linked device drivers and
> their modular counterparts?

minimal. a few instructions per IO.

	Ingo

speed difference between using hard-linked and modular drives?

[Roy Sigurd Karlsbakk]

hi

Are there any speed difference between hard-linked device drivers and
their modular counterparts?

roy

--
Roy Sigurd Karlsbakk, MCSE, MCNE, CLS, LCA

Computers are like air conditioners.
They stop working when you open Windows.