* fdisk doesn't know # of cylinders w/ 2.4.15pre2
@ 2001-11-13 2:01 Steven N. Hirsch
2001-11-13 7:24 ` Guest section DW
0 siblings, 1 reply; 2+ messages in thread
From: Steven N. Hirsch @ 2001-11-13 2:01 UTC (permalink / raw)
To: linux-kernel
I haven't seen any other reports of this, but fdisk is suddenly unable to
figure out the geometry of unpartitioned SCSI drives with 2.4.15pre2! It
comes up complaining that the number of cylinders must be set at the
expert menu.
If I reboot with 2.4.10-ac12 it works as it always did; assuming a
reasonable geometry and permitting me to partition the disk. Once
partitioned, it IS recognized correctly by the newer kernel.
Quite repeatable.
Steve
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: fdisk doesn't know # of cylinders w/ 2.4.15pre2
2001-11-13 2:01 fdisk doesn't know # of cylinders w/ 2.4.15pre2 Steven N. Hirsch
@ 2001-11-13 7:24 ` Guest section DW
0 siblings, 0 replies; 2+ messages in thread
From: Guest section DW @ 2001-11-13 7:24 UTC (permalink / raw)
To: Steven N. Hirsch, linux-kernel
On Mon, Nov 12, 2001 at 09:01:58PM -0500, Steven N. Hirsch wrote:
> I haven't seen any other reports of this, but fdisk is suddenly unable to
> figure out the geometry of unpartitioned SCSI drives with 2.4.15pre2!
Yes, broken in 2.4.15pre2, fixed in 2.4.15pre3.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-11-13 7:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-11-13 2:01 fdisk doesn't know # of cylinders w/ 2.4.15pre2 Steven N. Hirsch
2001-11-13 7:24 ` Guest section DW
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).