From: Vojtech Pavlik <vojtech@suse.cz>
To: "Fr?d?ric L. W. Meunier" <0@pervalidus.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: ECS K7S5A: IDE performance
Date: Wed, 28 Aug 2002 21:09:00 +0200 [thread overview]
Message-ID: <20020828210900.A20650@ucw.cz> (raw)
In-Reply-To: <Pine.LNX.4.44.0208281552190.213-100000@pervalidus.dyndns.org>; from 0@pervalidus.net on Wed, Aug 28, 2002 at 04:00:26PM -0300
On Wed, Aug 28, 2002 at 04:00:26PM -0300, Fr?d?ric L. W. Meunier wrote:
> I have an ECS K7S5A 3.1A. It works fine with 2.4.19. No
> corruption. Now I tested it with hdparm and:
>
> hdparm -tT /dev/hda
>
> /dev/hda:
> Timing buffer-cache reads: 128 MB in 0.79 seconds =162.03 MB/sec
> Timing buffered disk reads: 64 MB in 1.68 seconds = 38.10 MB/sec
>
> Only 38.10 ?
That's quite a LOT for an IDE drive.
> hdparm -i /dev/hda
>
> /dev/hda:
>
> Model=MAXTOR 6L060J3, FwRev=A93.0500, SerialNo=663200252994
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
> BuffType=DualPortCache, BuffSize=1819kB, MaxMultSect=16, MultSect=off
> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=117266688
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
> AdvancedPM=no WriteCache=enabled
> Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 1 2 3 4 5
>
> SIS5513: IDE controller on PCI bus 00 dev 15
> SIS5513: chipset revision 208
> SIS5513: not 100% native mode: will probe irqs later
> SiS735 ATA 100 controller
> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
> hda: MAXTOR 6L060J3, ATA DISK drive
>
> hda: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=7299/255/63, UDMA(100)
>
> --
> 0@pervalidus.{net, {dyndns.}org} ICQ: 156552241
> Tel: +55 (21) 2717-2399 (with voice mailbox)
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Vojtech Pavlik
SuSE Labs
next prev parent reply other threads:[~2002-08-28 19:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-28 19:00 ECS K7S5A: IDE performance Frédéric L. W. Meunier
2002-08-28 19:06 ` Tomas Szepe
2002-08-28 19:19 ` Frédéric L. W. Meunier
2002-08-28 19:28 ` Vojtech Pavlik
2002-08-28 19:32 ` Chris Friesen
2002-08-28 23:02 ` Lionel Bouton
2002-08-28 22:11 ` Daniel Egger
2002-08-28 19:09 ` Vojtech Pavlik [this message]
2002-08-29 0:05 Dieter Nützel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020828210900.A20650@ucw.cz \
--to=vojtech@suse.cz \
--cc=0@pervalidus.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).