From: "Dieter Nützel" <Dieter.Nuetzel@hamburg.de>
To: Linux Kernel List <linux-kernel@vger.kernel.org>
Subject: Re: ECS K7S5A: IDE performance
Date: Thu, 29 Aug 2002 02:05:56 +0200 [thread overview]
Message-ID: <200208290205.56291.Dieter.Nuetzel@hamburg.de> (raw)
Chris Friesen wrote:
> Frédéric L. W. Meunier wrote:
>
> > I just thought it'd be much more with an ATA100. I got more or
> > less the same with my earlier motherboard, an ASUS A7APro, and
> > without ATA66 - which would print a lot of CRC errors at boot
> > time if enabled in the BIOS. The K7S5A doesn't print any and is
> > rock solid.
>
> If you're reading more than the size of your on-drive buffer then you'll be
> limited by the speed at which the information can be grabbed off the
> drive--in your case, 38.1MB/s, which is quite good.
IBM (Yes, I konw...;-) IC35L060AVER07 (the whole family) is at 45,6 MB/s.
Maxtor 80 GB nearly the same.
System: AMD 750 (ATA4) and 760 MPX (ATA5).
> ATA33/66/100/133 only makes a significant difference in speed when you're
> reading from the on-drive cache.
Or maybe ATA RAID...;-)
Regards,
Dieter
--
Dieter Nützel
Graduate Student, Computer Science
University of Hamburg
Department of Computer Science
@home: Dieter.Nuetzel at hamburg.de (replace at with @)
next reply other threads:[~2002-08-28 23:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-29 0:05 Dieter Nützel [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-08-28 19:00 ECS K7S5A: IDE performance Frédéric L. W. Meunier
2002-08-28 19:06 ` Tomas Szepe
2002-08-28 19:19 ` Frédéric L. W. Meunier
2002-08-28 19:28 ` Vojtech Pavlik
2002-08-28 19:32 ` Chris Friesen
2002-08-28 23:02 ` Lionel Bouton
2002-08-28 22:11 ` Daniel Egger
2002-08-28 19:09 ` Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200208290205.56291.Dieter.Nuetzel@hamburg.de \
--to=dieter.nuetzel@hamburg.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).