* kernel 2.4.x bug in adaptec raid modules
@ 2003-03-07 16:55 Condor
0 siblings, 0 replies; only message in thread
From: Condor @ 2003-03-07 16:55 UTC (permalink / raw)
To: linux-kernel
Hello,
i use linux slackware 8.1 i386 raise fs and i try some
kernels in my server.
I found problem.
Explain problem:
My raid is Adaptec ATA 2400A IDE. My raid disks is on
UFS file system.
My boot disk (hda1) is on raise fs. I initialize my
raid with:
modprobe dpt_i2o
and i mount them:
mount -t ufs -o ufstype=44bsd /dev/sda5 /mnt/disk
When i copy/move small files (i try with 29 kb file)
from hda1 to sda5
my server is frezzing. Need cold restart. I try with
large files, no problem.
Any body know this problem and have solution for me?
I try latest kernel 2.4.20 but problem exist.
--- begin paste need parts ---
#sh ver_linux
If some fields are empty or look unusual you may have
an old version.
Compare to the current minimal requirements in
Documentation/Changes.
Linux urban 2.4.18 #4 Fri May 31 01:25:31 PDT 2002
i686 unknown
Gnu C 2.95.3
Gnu make 3.79.1
util-linux 2.11r
mount 2.11r
modutils 2.4.16
e2fsprogs 1.27
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Kbd command
Sh-utils 2.0
Modules Loaded ide-scsi dpt_i2o eepro100
--- end ver_linux ---
--- kernel version ---
Linux version 2.4.18 (root@midas) (gcc version 2.95.3
20010315 (release)) #4 Fri May 31 01:25:31 PDT 2002
--- end version ---
--- proccesor ---
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm)
stepping : 2
cpu MHz : 1050.066
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8
sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall
mmxext 3dnowext 3dnow
bogomips : 2097.15
--- end processor ---
--- modules ---
ide-scsi 7456 0
dpt_i2o 25056 0 (unused)
eepro100 17264 1
--- end modules ---
--- drivers information /proc/ioports ---
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
e000-e03f : Intel Corp. 82557 [Ethernet Pro 100]
e000-e03f : eepro100
e400-e40f : VIA Technologies, Inc. Bus Master IDE
--- end drivers ---
--- begin iomem ---
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c97ff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-0028031c : Kernel code
0028031d-002eade3 : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
20000000-23ffffff : S3 Inc. 86c868 [Vision 868 VRAM]
vers 0
e8000000-e9ffffff : Distributed Processing Technology
SmartRAID V Controller
eb000000-eb3fffff : VIA Technologies, Inc. VT8367
[KT266]
eb400000-eb41ffff : Intel Corp. 82557 [Ethernet Pro
100]
eb420000-eb420fff : Intel Corp. 82557 [Ethernet Pro
100]
eb420000-eb420fff : eepro100
ffff0000-ffffffff : reserved
--- end iomem ---
--- begin lspci -vvv ---
00:00.0 Host bridge: VIA Technologies, Inc. VT8367
[KT266]
Subsystem: Elitegroup Computer Systems:
Unknown device 0996
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at eb000000 (32-bit,
prefetchable) [size=4M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1
Command: RQ=0 SBA- AGP- 64bit- FW-
Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8367
[KT266 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01,
sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge:
fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort-
>Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2-
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:08.0 Ethernet controller: Intel Corp. 82557/8/9
[Ethernet Pro 100] (rev 0c)
Subsystem: Intel Corp. EtherExpress PRO/100 S
Desktop Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), cache
line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at eb420000 (32-bit,
non-prefetchable) [size=4K]
Region 1: I/O ports at e000 [size=64]
Region 2: Memory at eb400000 (32-bit,
non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled]
[size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2
PME-
00:09.0 VGA compatible controller: S3 Inc. 86c868
[Vision 868 VRAM] vers 0 (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 20000000 (32-bit,
non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled]
[size=64K]
00:0b.0 PCI bridge: Distributed Processing Technology
PCI Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Bus: primary=00, secondary=02, subordinate=02,
sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 00100000-000fffff
Prefetchable memory behind bridge:
00100000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort-
>Reset- FastB2B-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:0b.1 I2O: Distributed Processing Technology
SmartRAID V Controller (rev 02) (prog-if 01)
Subsystem: Distributed Processing Technology
2400A UDMA Four Channel
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 250ns max), cache line
size 08
Interrupt: pin A routed to IRQ 12
BIST result: 00
Region 0: Memory at e8000000 (32-bit,
prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled]
[size=32K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA
Bridge
Subsystem: Elitegroup Computer Systems:
Unknown device 0996
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:11.1 IDE interface: VIA Technologies, Inc. Bus
Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Bus Master
IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at e400 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
--- end lspci ---
--- begin scsi information ---
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ADAPTEC Model: RAID-0 Rev: 370L
Type: Direct-Access ANSI SCSI
revision: 02
Host: scsi0 Channel: 02 Id: 00 Lun: 00
Vendor: ADAPTEC Model: RAID-0 Rev: 370L
Type: Direct-Access ANSI SCSI
revision: 02
--- end scsi info ---
Best Regards,
Condor
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-03-07 16:44 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-03-07 16:55 kernel 2.4.x bug in adaptec raid modules Condor
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).