linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* cpufreq not supported on ALi / ATI chipset
@ 2003-04-02 19:46 Gerassimo Tselentis
  2003-04-07 10:21 ` Ducrot Bruno
  0 siblings, 1 reply; 2+ messages in thread
From: Gerassimo Tselentis @ 2003-04-02 19:46 UTC (permalink / raw)
  To: linux-kernel

Hi

I see someone posted a message about cpufreq not being supported on an
Intel 440BX motherboard so I thought I'd post mine too. I have a Compaq
Evo N1050v laptop with a combination of ALi and ATI bridges. It has an
Intel Pentium 4-M 1.8GHz I'm not sure which is which, but here is an
lspci :

00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab2 (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 7010
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 02)
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem]
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link)
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
00:11.0 Bridge: ALi Corporation M7101 PMU
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M

Also, here is the relevant dmesg output :

...
cpufreq: Intel(R) SpeedStep(TM) support $Revision: 1.7.2.6 $
cpufreq: Intel(R) SpeedStep(TM) for this processor not (yet) available.
...

I've also tried the 2.5.65 kernel release. The above was from a
2.4.21-0.13mdk kernel. The ATI bridge itself is not supported, as I
gathered, so maybe that's why and maybe I should rather address this
email to a different development group instead of cpufreq. I'd gladly
provide more verbose info if wanted.

Regards,
G. Tselentis



^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: cpufreq not supported on ALi / ATI chipset
  2003-04-02 19:46 cpufreq not supported on ALi / ATI chipset Gerassimo Tselentis
@ 2003-04-07 10:21 ` Ducrot Bruno
  0 siblings, 0 replies; 2+ messages in thread
From: Ducrot Bruno @ 2003-04-07 10:21 UTC (permalink / raw)
  To: Gerassimo Tselentis; +Cc: linux-kernel, ducrot

On Wed, Apr 02, 2003 at 09:46:30PM +0200, Gerassimo Tselentis wrote:
> Hi
> 
> I see someone posted a message about cpufreq not being supported on an
> Intel 440BX motherboard so I thought I'd post mine too. I have a Compaq
> Evo N1050v laptop with a combination of ALi and ATI bridges. It has an
> Intel Pentium 4-M 1.8GHz I'm not sure which is which, but here is an
> lspci :
> 
> 00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab2 (rev 02)
> 00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 7010
> 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
> 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
> Controller Audio Device (rev 02)
> 00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
> 00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem]
> 00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
> 00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
> IEEE-1394a-2000 Controller (PHY/Link)
> 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
> 00:11.0 Bridge: ALi Corporation M7101 PMU
> 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815
> (MacPhyter) Ethernet Controller
> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M
> 
> Also, here is the relevant dmesg output :
> 
> ...
> cpufreq: Intel(R) SpeedStep(TM) support $Revision: 1.7.2.6 $
> cpufreq: Intel(R) SpeedStep(TM) for this processor not (yet) available.
> ...
> 
> I've also tried the 2.5.65 kernel release. The above was from a
> 2.4.21-0.13mdk kernel. The ATI bridge itself is not supported, as I
> gathered, so maybe that's why and maybe I should rather address this
> email to a different development group instead of cpufreq. I'd gladly
> provide more verbose info if wanted.
> 

cpufreq mailing list is the right place to ask for help.
I doubt also that 2.4 series could help you (yet).
You may want to subscribe to cpufreq mailing-list.

In short, there is for now only experimental support for the ALi
southbridge, but is not included in cpufreq 'vanilla' due to
the fact that there is not enough testers.

Cheers,

-- 
Ducrot Bruno
http://www.poupinou.org        Page profaissionelle
http://toto.tu-me-saoules.com  Haume page

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-04-07 10:10 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-04-02 19:46 cpufreq not supported on ALi / ATI chipset Gerassimo Tselentis
2003-04-07 10:21 ` Ducrot Bruno

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).