* PROBLEM: non-transparent Intel 82801BAM/CAM PCI-to-PCI bridge (rev. 81 chip, in IBM T40 2373-92U 4/2003 laptop)
@ 2003-06-27 19:00 Mitch Sukalski
0 siblings, 0 replies; 2+ messages in thread
From: Mitch Sukalski @ 2003-06-27 19:00 UTC (permalink / raw)
To: linux-kernel
If you have a new IBM T40 (mine is a model 2372-92U, build 4/03, 2GB RAM), the
latest 2.4.21 kernel (and 2.4.20 as well), and PCMCIA support is broken, then
you may have the same problem that I've just isolated. My symptoms included
crazy values for socket status, and many "timed out during reset" messages
(see dmesg output below).
Jun 12 15:00:36 juggler kernel: Yenta IRQ list 0000, PCI irq11
Jun 12 15:00:36 juggler kernel: Socket status: 080c2420
Jun 12 15:00:36 juggler kernel: Yenta IRQ list 0000, PCI irq11
Jun 12 15:00:36 juggler kernel: Socket status: 000dd9e2
Jun 12 15:00:39 juggler kernel: cs: socket f74a8000 timed out during reset.
Try increasing setup_delay.
...
^ permalink raw reply [flat|nested] 2+ messages in thread
* PROBLEM: non-transparent Intel 82801BAM/CAM PCI-to-PCI bridge (rev. 81 chip, in IBM T40 2373-92U 4/2003 laptop)
@ 2003-06-27 19:19 Mitch Sukalski
0 siblings, 0 replies; 2+ messages in thread
From: Mitch Sukalski @ 2003-06-27 19:19 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1871 bytes --]
If you have a new IBM T40 (mine is a model 2372-92U, build 4/03, 2GB RAM), the
latest 2.4.21 kernel (and 2.4.20 as well), and PCMCIA support is broken, then
you may have the same problem that I've just isolated. My symptoms included
crazy values for socket status, and many "timed out during reset" messages
(see dmesg output below).
Jun 12 15:00:36 juggler kernel: Yenta IRQ list 0000, PCI irq11
Jun 12 15:00:36 juggler kernel: Socket status: 080c2420
Jun 12 15:00:36 juggler kernel: Yenta IRQ list 0000, PCI irq11
Jun 12 15:00:36 juggler kernel: Socket status: 000dd9e2
Jun 12 15:00:39 juggler kernel: cs: socket f74a8000 timed out during reset.
Try increasing setup_delay.
<last line repeated...>
The root of the problem is that PCI fixup code currently assumes that all
Intel 82801 family PCI bridge chips operate in transparent mode, no matter
what they self-report or how they are configured. With that assumption, the
Cardbus controller will have its I/O regions fortuitously mapped into the
right space (at least on my machine), but the memory regions are mapped right
at the end of RAM (instead of memory the bridge is configured to access).
If you remove the next-to-last entry for pcibios_fixup[] in file
arch/i386/kernel/pci-pc.c for pci_fixup_transparent_bridge() and recompile,
then everything will be mapped correctly. I realize that this is not a
general fix, since many 82801 chips are broken. Still, I thought the user
community might want this information to save time in tracking down this
problem. I've attached "/sbin/lspci -vv -x" output running under this
modified working kernel for the experts.
Cheers,
Mitch
--
Mitch Sukalski <mwsukal@ca.sandia.gov>
HPC and Networking Research (8961)
Sandia National Laboratories
P.O. Box 969, Mail Stop 9915, Livermore, CA. 94551-0969
phone: (925) 294-4713
fax: (925) 294-2776
[-- Attachment #2: pci_info.txt --]
[-- Type: text/plain, Size: 12877 bytes --]
00:00.0 Host bridge: Intel Corp.: Unknown device 3340 (rev 03)
Subsystem: IBM: Unknown device 0529
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <available only to root>
00: 86 80 40 33 06 01 90 20 03 00 00 06 00 00 00 00
10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 29 05
30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge: Intel Corp.: Unknown device 3341 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: e0000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00: 86 80 41 33 07 01 a0 00 03 00 04 06 00 60 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 30 30 a0 22
20: 10 c0 10 c0 00 e0 f0 e7 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 052d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1800 [size=32]
00: 86 80 c2 24 05 00 80 02 01 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 18 00 00 00 00 00 00 00 00 00 00 14 10 2d 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 052d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
00: 86 80 c4 24 05 00 80 02 01 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 18 00 00 00 00 00 00 00 00 00 00 14 10 2d 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 052d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
00: 86 80 c7 24 05 00 80 02 01 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 18 00 00 00 00 00 00 00 00 00 00 14 10 2d 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: IBM: Unknown device 052e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>
00: 86 80 cd 24 06 01 90 02 01 20 03 0c 00 00 00 00
10: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 2e 05
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=08, sec-latency=168
I/O behind bridge: 00004000-00008fff
Memory behind bridge: c0200000-cfffffff
Prefetchable memory behind bridge: e8000000-efffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00: 86 80 48 24 07 01 80 80 81 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 08 a8 40 80 80 22
20: 20 c0 f0 cf 00 e8 f0 ef 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24cc (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 86 80 cc 24 0f 00 80 02 01 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1f.1 IDE interface: Intel Corp.: Unknown device 24ca (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: IBM: Unknown device 052d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 7ff7b000 (32-bit, non-prefetchable) [size=1K]
00: 86 80 ca 24 07 00 80 02 01 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 61 18 00 00 00 b0 f7 7f 00 00 00 00 14 10 2d 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01)
Subsystem: IBM: Unknown device 052d
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1880 [size=32]
00: 86 80 c3 24 01 00 80 02 01 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 18 00 00 00 00 00 00 00 00 00 00 14 10 2d 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 01)
Subsystem: IBM: Unknown device 0537
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00: 86 80 c5 24 07 00 90 02 01 00 01 04 00 00 00 00
10: 01 1c 00 00 c1 18 00 00 00 0c 00 c0 00 08 00 c0
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 37 05
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem (rev 01) (prog-if 00 [Generic])
Subsystem: IBM: Unknown device 0525
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <available only to root>
00: 86 80 c6 24 05 00 90 02 01 00 03 07 00 00 00 00
10: 01 24 00 00 01 20 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 25 05
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000] (rev 02) (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 0531
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
00: 02 10 66 4c 87 03 b0 02 02 00 00 03 08 42 00 00
10: 08 00 00 e0 01 30 00 00 00 00 10 c0 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 31 05
30: 00 00 00 00 58 00 00 00 00 00 00 00 0b 01 08 00
02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
Subsystem: IBM ThinkPad T30
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0240000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=05, sec-latency=176
Memory window 0: e8000000-e83ff000 (prefetchable)
Memory window 1: c0400000-c07ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00: 4c 10 55 ac 07 00 10 02 01 00 07 06 08 a8 82 00
10: 00 00 24 c0 a0 00 00 02 02 03 05 b0 00 00 00 e8
20: 00 f0 3f e8 00 00 40 c0 00 f0 7f c0 00 40 00 00
30: fc 40 00 00 00 44 00 00 fc 44 00 00 0b 01 c0 05
40: 14 10 12 05 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
Subsystem: IBM ThinkPad T30
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c0241000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=06, subordinate=08, sec-latency=176
Memory window 0: e8400000-e87ff000 (prefetchable)
Memory window 1: c0800000-c0bff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00: 4c 10 55 ac 07 00 10 02 01 00 07 06 08 a8 82 00
10: 00 10 24 c0 a0 00 00 02 02 06 08 b0 00 00 40 e8
20: 00 f0 7f e8 00 00 80 c0 00 f0 bf c0 00 48 00 00
30: fc 48 00 00 00 4c 00 00 fc 4c 00 00 0b 02 c0 05
40: 14 10 12 05 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:01.0 Ethernet controller: Intel Corp.: Unknown device 101e (rev 03)
Subsystem: IBM: Unknown device 0549
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0220000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at 8000 [size=64]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00: 86 80 1e 10 07 01 30 02 03 00 00 02 08 40 00 00
10: 00 00 22 c0 00 00 20 c0 01 80 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 22 00 00 00 14 10 49 05
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 ff 00
02:02.0 Ethernet controller: Unknown device 168c:0012 (rev 01)
Subsystem: Unknown device 17ab:8310
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 80 (2500ns min, 7000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0210000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
00: 8c 16 12 00 16 01 90 02 01 00 00 02 08 50 00 00
10: 00 00 21 c0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 50 00 00 ab 17 10 83
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 0a 1c
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-06-27 19:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-06-27 19:00 PROBLEM: non-transparent Intel 82801BAM/CAM PCI-to-PCI bridge (rev. 81 chip, in IBM T40 2373-92U 4/2003 laptop) Mitch Sukalski
2003-06-27 19:19 Mitch Sukalski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).