* 2.6.0-test1/2 won't let me use keyboard @ 2003-07-28 21:45 adri 2003-07-29 14:20 ` Andries Brouwer 0 siblings, 1 reply; 7+ messages in thread From: adri @ 2003-07-28 21:45 UTC (permalink / raw) To: linux-kernel hi all, I have a problem compiling 2.6.0-test1, and later 2.6.0-test2. booting the kernel goes well, but when i try to log in my system, keyboard seems to be crazy, and when i press a key, it writes the same key for almost 4 times, so it is very impossible log in. /var/log/syslog don't seems to have something strange. my system is a laptop hp pavilion ze4200, lspci tells me: 00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab0 (rev 13) 00:01.0 PCI bridge: ATI Technologies Inc U1/A3 AGP Bridge [IGP 320M] (rev 01) 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) 00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] 00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem] 00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller 00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) 00:11.0 Bridge: ALi Corporation M7101 PMU 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1 i try to use 2.6.0-test1, test1-ac1, test1-mm1, test1-bk2, test2, with always the same result. is there someone who can help don't get crazy? thanks adri -- icq# 63011800 - jabber: adri@jabber.org gnupg key id: 4472FB13 "Non esiste vento favorevole per il marinaio che non sa dove andare." Seneca ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1/2 won't let me use keyboard 2003-07-28 21:45 2.6.0-test1/2 won't let me use keyboard adri @ 2003-07-29 14:20 ` Andries Brouwer 2003-07-30 7:27 ` adri 0 siblings, 1 reply; 7+ messages in thread From: Andries Brouwer @ 2003-07-29 14:20 UTC (permalink / raw) To: adri, linux-kernel On Mon, Jul 28, 2003 at 11:45:23PM +0200, adri wrote: > I have a problem compiling 2.6.0-test1, and later 2.6.0-test2. > booting the kernel goes well, but when i try to log in my system, > keyboard seems to be crazy, and when i press a key, it writes the same > key for almost 4 times, so it is very impossible log in. > /var/log/syslog don't seems to have something strange. Could you compile i8042.c with #define DEBUG instead of #undef DEBUG and report what that yields in the syslog? ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1/2 won't let me use keyboard 2003-07-29 14:20 ` Andries Brouwer @ 2003-07-30 7:27 ` adri 2003-08-02 22:37 ` adri 0 siblings, 1 reply; 7+ messages in thread From: adri @ 2003-07-30 7:27 UTC (permalink / raw) To: Andries Brouwer; +Cc: linux-kernel il giorno Tue, Jul 29, 2003 at 04:20:25PM +0200, Andries Brouwer ha scritto > Could you compile i8042.c with #define DEBUG instead of #undef DEBUG > and report what that yields in the syslog? yes, because the very long report, i prefer to put it in: http://www.archetti.org/syslog I also read about some keyboard failure dues at the new kernel, so i'm still tring using patch i see in lkml. many thanks for your interesting, i hope to easy solve the problem ;)) adri -- icq# 63011800 - jabber: adri@jabber.org gnupg key id: 4472FB13 "Non esiste vento favorevole per il marinaio che non sa dove andare." Seneca ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1/2 won't let me use keyboard 2003-07-30 7:27 ` adri @ 2003-08-02 22:37 ` adri 2003-08-04 9:53 ` Andries Brouwer 0 siblings, 1 reply; 7+ messages in thread From: adri @ 2003-08-02 22:37 UTC (permalink / raw) To: linux-kernel; +Cc: adri, Andries Brouwer il giorno Wed, Jul 30, 2003 at 09:27:08AM +0200, adri ha scritto > il giorno Tue, Jul 29, 2003 at 04:20:25PM +0200, Andries Brouwer ha scritto > > Could you compile i8042.c with #define DEBUG instead of #undef DEBUG > > and report what that yields in the syslog? well, i investigate into my problem, building kernel with debug, and i noticed some strange... when the system boot up it load mouse without problem: drivers/input/serio/i8042.c: d4 -> i8042 (command) [562] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [562] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [564] Synaptics Touchpad, model: 1 Firmware: 5.8 Sensor: 35 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection input: Synaptics Synaptics TouchPad on isa0060/serio1 then it start to search for the aux port, with success: drivers/input/serio/i8042.c: d4 -> i8042 (command) [584] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [584] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [586] serio: i8042 AUX port at 0x60,0x64 irq 12 and for the last it find the keyboard: drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [629] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [631] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, kbd, 1) [640] input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 but here the problem is the same: when i press a key it seems that i press this keys for almost 4 time (eg. i press "a", and it give me "aaaa") when i try to stop my system, i pressed alt+sysrq, +s, for sync, +u for mounting read only, and i mistake and pressed alt+sysrq+i, so i killed every task. well, i noticed here, with debug still on, that when i pressed a key, it received only one pressure: drivers/input/serio/i8042.c: 0c <- i8042 (interrupt, kbd, 1) [168545] but it write to standard output for characters. i think the problem is just here, then, someone wants to help me to fix this? thanks adri ah, just for knowledge, my keyboard is the standard keyboard with laptop hp pavilion ze4200... -- icq# 63011800 - jabber: adri@jabber.org gnupg key id: 4472FB13 "Non esiste vento favorevole per il marinaio che non sa dove andare." Seneca ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1/2 won't let me use keyboard 2003-08-02 22:37 ` adri @ 2003-08-04 9:53 ` Andries Brouwer 2003-08-04 10:17 ` adri 2003-08-10 23:00 ` adri 0 siblings, 2 replies; 7+ messages in thread From: Andries Brouwer @ 2003-08-04 9:53 UTC (permalink / raw) To: adri, linux-kernel On Sun, Aug 03, 2003 at 12:37:40AM +0200, adri wrote: > but here the problem is the same: when i press a key it seems that i > press this keys for almost 4 time (eg. i press "a", and it give me > "aaaa") > when i try to stop my system, i pressed alt+sysrq, +s, for sync, +u for > mounting read only, and i mistake and pressed alt+sysrq+i, so i killed > every task. > well, i noticed here, with debug still on, that when i pressed a key, it > received only one pressure: > drivers/input/serio/i8042.c: 0c <- i8042 (interrupt, kbd, 1) [168545] > but it write to standard output for characters. Yes, thanks for confirming. The new input code generates the repeat synthetically, by setting a timer, and that code must be buggy. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1/2 won't let me use keyboard 2003-08-04 9:53 ` Andries Brouwer @ 2003-08-04 10:17 ` adri 2003-08-10 23:00 ` adri 1 sibling, 0 replies; 7+ messages in thread From: adri @ 2003-08-04 10:17 UTC (permalink / raw) To: linux-kernel il giorno Mon, Aug 04, 2003 at 11:53:10AM +0200, Andries Brouwer ha scritto > Yes, thanks for confirming. The new input code generates the repeat > synthetically, by setting a timer, and that code must be buggy. ok, thanks for your answer... have you any idea of where to search and playing with that time to try to find the bug? btw, i'm always here to test... ;)) adri -- icq# 63011800 - jabber: adri@jabber.org gnupg key id: 4472FB13 "Non esiste vento favorevole per il marinaio che non sa dove andare." Seneca ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1/2 won't let me use keyboard 2003-08-04 9:53 ` Andries Brouwer 2003-08-04 10:17 ` adri @ 2003-08-10 23:00 ` adri 1 sibling, 0 replies; 7+ messages in thread From: adri @ 2003-08-10 23:00 UTC (permalink / raw) To: Andries Brouwer; +Cc: linux-kernel il giorno Mon, Aug 04, 2003 at 11:53:10AM +0200, Andries Brouwer ha scritto > Yes, thanks for confirming. The new input code generates the repeat > synthetically, by setting a timer, and that code must be buggy. i apologies for the retard in my response but i have so much work in my job... i think the problem is in "rtc module not found": in that way it's possible that the kernel wouldn't see the timer to stop my keyboard repeat? if so, please, let me know where i can find information to try to solve the problem. (i also apologies for my bad english!) ;)) thanks adri -- icq# 63011800 - jabber: adri@jabber.org gnupg key id: 4472FB13 "Non esiste vento favorevole per il marinaio che non sa dove andare." Seneca ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-08-10 23:00 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2003-07-28 21:45 2.6.0-test1/2 won't let me use keyboard adri 2003-07-29 14:20 ` Andries Brouwer 2003-07-30 7:27 ` adri 2003-08-02 22:37 ` adri 2003-08-04 9:53 ` Andries Brouwer 2003-08-04 10:17 ` adri 2003-08-10 23:00 ` adri
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).