2.6.0-test4-mm1

2.6.0-test4-mm1

[Andrew Morton]

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test4/2.6.0-test4-mm1/


. Lots of random fixes.

. m68k, x86_64 and networking syncups.


Linus is away for the rest of this month so if you have stuff it is probably
best to wait until he returns or to send it to myself.




Changes since 2.6.0-test3-mm3:


 linus.patch

 Current Linus bk tree

-si_band-type-fix.patch
-ext3-block-allocation-cleanup.patch
-nfs-revert-backoff.patch
-signal-race-fix.patch
-vmscan-defer-writepage.patch
-local-apic-enable-fixes.patch
-awe-core.patch
-awe-use-gfp_flags.patch
-awe-fix-truncate-errors.patch
-ikconfig-enable.patch
-bd-claim-whole-disk.patch
-O_EXCL-claim-blockdevs.patch
-opl3sa2-lock-init-fix.patch
-dscc4-1.patch
-dscc4-2.patch
-dscc4-3.patch
-dscc4-4.patch
-dscc4-5.patch
-dscc4-6.patch
-dscc4-7.patch
-dscc4-8.patch
-aio-mm-leak-fix.patch
-selinux-avc_log_lock-fix.patch
-selinux-check-behaviour-fix.patch
-ymfpci-oops-fix.patch
-ymf_devs-lock.patch
-slab-drain_array-fix.patch
-loop-oops-fix.patch
-atp870u_detect-lockup-fix.patch
-copy_user-handle-kernel-fault.patch
-Locking-update.patch
-sysctl_h-needs-compiler_h.patch
-aio-mm-refcounting-fix.patch

 Merged

-x86_64-fixes.patch
+kgdb-x86_64-fixes.patch

 Renamed

+handle-unreadable-dot-config.patch

 build system fixes

+huge-net-update.patch

 Current davem tree

+x86_64-update-3.patch

 Current ak tree

+dac960-GAM-IOCTLs-cleanup.patch

 DAC960 rework

+thread-pgrp-fix-2.patch

 Temp fix for the setpgrp-vs-threading problem

+kj-maintainers.patch

 Add the kernel janitor project to ./MAINTAINERS

+ramdisk-cleanup.patch

 Random whitespace fiddling

+v4l-use-after-free-fix.patch

 v4l bugfix

+ikconfig-makefile-update.patch

 /proc/ikconfig build tweaks

+ftape-warning-fix.patch

 Fix a warning

+jffs-retval-fix.patch

 Fix return value types

+make-ACPI_SLEEP-select-SOFTWARE_SUSPEND.patch

 Config dependency

+3GB-personality.patch

 Create a 3GB exec personality to support buggy apps on x86_64 and, later
 ia32 with the 4G/4G split.

+zeromap_pmd_range-fix.patch

 pagetable initialisation fix

+no-async-write-errors-on-close.patch

 Don't try to report EIO and ENOSPC errors through close()

+sis190-fix.patch

 build/bug fix

+remove-add_wait_queue_cond.patch

 dead code

+spin_lock_irqrestore-fixes.patch

 typos

+pcmciamtd-fix.patch

 build fix

+zoran-memleak-fixes.patch
+zoran-rename-debug.patch
+zoran-release-callback.patch
+zoran-pci_disable_device.patch
+zoran-cleanups.patch
+zoran-cleanups-2.patch
+zoran-naming-fix.patch

 Zoran driver update

+airo-build-fix.patch

 Make airo build with CONFIG_PCI=n

+m68k-vmlinux_lds-move.patch
+mac-ide-fix.patch
+m68k-asm-sections-fix.patch
+m68k-asm-local.patch
+amiga-z2ram-fix.patch
+amiga-floppy-fix.patch
+atari-floppy-fix.patch
+m68k-switch_to-fix.patch

 m68k updates

+pcxx-warning-fix.patch

 Warning fix

+pcnet32-unregister_pci-fix.patch

 rmmod crash fix

+hwifs-oops-unregister-fix.patch

 ide unregistration oops fix

+proc-pid-maps-32-bit-fix.patch

 Make /proc/pid/maps output more palatable to apps which expect 32-bit
 addresses.

-kjournald-PF_SYNCWRITE.patch

 Dropped - it slows down rxt3.

+sched-balance-fix-2.6.0-test3-mm3-A0.patch

 CPU scheduler runqueue balancing fix

+o18int.patch
+o18.1int.patch

 Interactivity tweaks from Con

-blacklist-asus-L3800C-dmi.patch

 Dropped - the ACPI guys fixed it.






All 182 patches


linus.patch

mm.patch
  add -mmN to EXTRAVERSION

kgdb-ga.patch
  kgdb stub for ia32 (George Anzinger's one)
  kgdbL warning fix

kgdb-warning-fix.patch
  kgdbL warning fix

kgdb-build-fix.patch

kgdb-spinlock-fix.patch

kgdb-fix-debug-info.patch
  kgdb: CONFIG_DEBUG_INFO fix

kgdb-cpumask_t.patch

kgdb-x86_64-fixes.patch
  x86_64 fixes

handle-unreadable-dot-config.patch
  correctly handle unreadable .configs

huge-net-update.patch
  net update

config_spinline.patch
  uninline spinlocks for profiling accuracy.

ppc64-bar-0-fix.patch
  Allow PCI BARs that start at 0

ppc64-reloc_hide.patch

ppc64-semaphore-reimplementation.patch
  ppc64: use the ia32 semaphore implementation

ppc64-local.patch
  ppc64: local.h implementation

ppc64-sched_clock.patch
  ppc64: sched_clock()

sym-do-160.patch
  make the SYM driver do 160 MB/sec

x86_64-update-3.patch
  x86-64 update for test4

random-locking-fixes.patch
  random: SMP locking

random-accounting-and-sleeping-fixes.patch
  random: accounting and sleeping fixes

rt-tasks-special-vm-treatment.patch
  real-time enhanced page allocator and throttling

rt-tasks-special-vm-treatment-2.patch

input-use-after-free-checks.patch
  input layer debug checks

deadline-requeue-workaround.patch
  deadline requeue workaround

fbdev.patch

cursor-flashing-fix.patch
  fbdev: fix cursor letovers

disable-athlon-prefetch.patch

sis900-atomicity-fix.patch
  sis900 atomicity fix

slab-hexdump.patch
  slab: hexdump structures when things go wrong

aic7xxx-parallel-build-fix.patch
  fix parallel builds for aic7xxx

yenta-20030817-1-zv.patch

yenta-20030817-2-override.patch

yenta-20030817-3-sockinit.patch

yenta-20030817-4-pm.patch

yenta-20030817-5-pm2.patch

yenta-20030817-6-init.patch

yenta-20030817-7-quirks.patch

proc-pid-setuid-ownership-fix.patch
  fix /proc/pid/fd ownership across setuid()

pid-revalidate-security-hook.patch
  Call security hook from pid*_revalidate

dac960-GAM-IOCTLs-cleanup.patch
  move DAC960 GAM IOCTLs into a new device

thread-pgrp-fix-2.patch
  Fix setpgid and threads

kj-maintainers.patch
  Add the kernel janitors to MAINTAINERS

ramdisk-cleanup.patch

v4l-use-after-free-fix.patch
  Fix bug in v4l core for 2.6.0-test3-bk

ikconfig-makefile-update.patch
  ikconfig - Makefile update

ftape-warning-fix.patch
  Fix ftape warning

jffs-retval-fix.patch
  jffs aops return type fix

delay-ksoftirqd-fallback.patch
  Try harded in IRQ context before falling back to ksoftirqd

rcu-grace-period.patch
  Monitor RCU grace period

intel8x0-cleanup.patch
  intel8x0 cleanups

make-ACPI_SLEEP-select-SOFTWARE_SUSPEND.patch
  Make ACPI_SLEEP select SOFTWARE_SUSPEND

3GB-personality.patch
  Add 3GB personality

zeromap_pmd_range-fix.patch
  zeromap_pmd_range bugfix

no-async-write-errors-on-close.patch
  don't report async write errors on close() after all

sis190-fix.patch
  sis190 synchronize_irq fix

remove-add_wait_queue_cond.patch
  remove add_wait_queue_cond()

spin_lock_irqrestore-fixes.patch
  spin_lock_irqrestore() typo fixes

pcmciamtd-fix.patch
  pcmciamtd.c: remove release timer

zoran-memleak-fixes.patch
  zoran: memleak fixes

zoran-rename-debug.patch
  zoran: debug->zr_debug

zoran-release-callback.patch
  zoran: add release callback

zoran-pci_disable_device.patch
  zoranL: add pci_disable_device() call

zoran-cleanups.patch
  zoran: cleanups

zoran-cleanups-2.patch
  zoran: more cleanups

zoran-naming-fix.patch
  zoran: correct name field breakage

airo-build-fix.patch
  airo CONFIG_PCI=n build fix

m68k-vmlinux_lds-move.patch
  move m68k vmlinux.lds files

mac-ide-fix.patch
  Fix Mac IDE

m68k-asm-sections-fix.patch
  m68k asm/sections.h

m68k-asm-local.patch
  m68k asm/local.h

amiga-z2ram-fix.patch
  Amiga z2ram

amiga-floppy-fix.patch
  Amiga floppy

atari-floppy-fix.patch
  Atari floppy

m68k-switch_to-fix.patch
  M68k switch_to fix

pcxx-warning-fix.patch
  drivers/char/pcxx.c warning fix

pcnet32-unregister_pci-fix.patch
  pcnet32 needs unregister_pci

hwifs-oops-unregister-fix.patch
  Fix ide unregister vs. driver model

p00001_synaptics-restore-on-close.patch

p00002_psmouse-reset-timeout.patch

p00003_synaptics-multi-button.patch

p00004_synaptics-optional.patch

p00005_synaptics-pass-through.patch

p00006_psmouse-suspend-resume.patch

p00007_synaptics-old-proto.patch

synaptics-mode-set.patch
  Synaptics mode setting

syn-multi-btn-fix.patch
  synaptics multibutton fix

keyboard-resend-fix.patch
  keyboard resend fix

proc-pid-maps-32-bit-fix.patch
  Do 32bit addresses in /proc/self/maps if possible

linux-isp-2.patch

linux-isp-2-fix-again.patch
  lost feral fix

feral-bounce-fix.patch
  Feral driver - highmem issues

feral-bounce-fix-2.patch
  Feral driver bouncing fix

list_del-debug.patch
  list_del debug check

print-build-options-on-oops.patch
  print a few config options on oops

show_task-free-stack-fix.patch
  show_task() fix and cleanup

put_task_struct-debug.patch

ia32-mknod64.patch
  mknod64 for ia32

ext2-64-bit-special-inodes.patch
  ext2: support for 64-bit device nodes

ext3-64-bit-special-inodes.patch
  ext3: support for 64-bit device nodes

64-bit-dev_t-kdev_t.patch
  64-bit dev_t and kdev_t

64-bit-dev_t-other-archs.patch
  enable 64-bit dev_t for other archs

mknod64-64-bit-fix.patch
  dev_t: fix mknod for 64-bit archs

ustat64.patch
  ustat64

ppc-64-bit-stat.patch
  fix ppc stat.h for 64-bit dev_t

64-bit-dev_t-init_rd-fixes.patch
  initrd fixes for 64-bit dev_t

arch-dev_t-stat-fixes.patch
  Fix all asm-*/stat.h dev_t instances

oops-dump-preceding-code.patch
  i386 oops output: dump preceding code

lockmeter.patch

sparc64-lockmeter-fix.patch

sparc64-lockmeter-fix-2.patch
  Fix lockmeter on sparc64

printk-oops-mangle-fix.patch
  disentangle printk's whilst oopsing on SMP

20-odirect_enable.patch

21-odirect_cruft.patch

22-read_proc.patch

23-write_proc.patch

24-commit_proc.patch

25-odirect.patch

nfs-O_DIRECT-always-enabled.patch
  Force CONFIG_NFS_DIRECTIO

sched-balance-fix-2.6.0-test3-mm3-A0.patch
  sched-balance-fix-2.6.0-test3-mm3-A0

sched-2.6.0-test2-mm2-A3.patch
  sched-2.6.0-test2-mm2-A3

ppc-sched_clock.patch

sparc64_sched_clock.patch

x86_64-sched_clock.patch
  Add sched_clock for x86-64

sched-warning-fix.patch

sched-balance-tuning.patch
  CPU scheduler balancing fix

sched-no-tsc-on-numa.patch
  Subject: Re: Fw: Re: 2.6.0-test2-mm3

o12.2int.patch
  O12.2int for interactivity

o12.3.patch
  O12.3 for interactivity

o13int.patch
  O13int for interactivity

o13.1int.patch
  O13.1int

o14int.patch
  O14int

o14int-div-fix.patch
  o14int 64-bit-divide fix

o14.1int.patch
  O14.1int

o15int.patch
  O15int for interactivity

o16int.patch
  From: Con Kolivas <kernel@kolivas.org>
  Subject: [PATCH] O16int for interactivity

o16.1int.patch
  O16.1int for interactivity

o16.2int.patch
  O16.2int

o16.3int.patch
  O16.3int

o18int.patch
  O18int

o18.1int.patch
  O18.1int

4g-2.6.0-test2-mm2-A5.patch
  4G/4G split patch

4g4g-vmlinux-update-got-lost.patch

4g4g-do_page_fault-cleanup.patch
  4G/4G: remove debug code

4g4g-cleanups.patch

kgdb-4g4g-fix-2.patch

4g4g-config-fix.patch

4g4g-pmd-fix.patch
  4g4g: pmd fix

4g4g-wli-fixes.patch
  4g/4g: fixes from Bill

4g4g-fpu-fix.patch
  4g4g: fpu emulation fix

4g4g-show_registers-fix.patch
  4g4g: show_registers() fix

4g4g-pin_page-atomicity-fix.patch
  4g/4g usercopy atomicity fix

4g4g-remove-touch_all_pages.patch

4g4g-debug-flags-fix.patch
  4g4g: debug flags fix

4g4g-TI_task-fix.patch
  4g4g: Fix wrong asm-offsets entry

cyclone-fixmap-fix.patch
  cyclone time fixmap fix

ppc-fixes.patch
  make mm4 compile on ppc

aic7xxx_old-oops-fix.patch

aio-01-retry.patch
  AIO: Core retry infrastructure

io_submit_one-EINVAL-fix.patch
  Fix aio process hang on EINVAL

aio-02-lockpage_wq.patch
  AIO: Async page wait

aio-03-fs_read.patch
  AIO: Filesystem aio read

aio-04-buffer_wq.patch
  AIO: Async buffer wait

aio-05-fs_write.patch
  AIO: Filesystem aio write

aio-05-fs_write-fix.patch

aio-06-bread_wq.patch
  AIO: Async block read

aio-06-bread_wq-fix.patch

aio-07-ext2getblk_wq.patch
  AIO: Async get block for ext2

O_SYNC-speedup-2.patch
  speed up O_SYNC writes

aio-09-o_sync.patch
  aio O_SYNC

aio-10-BUG-fix.patch
  AIO: fix a BUG

aio-11-workqueue-flush.patch
  AIO: flush workqueues before destroying ioctx'es

aio-12-readahead.patch
  AIO: readahead fixes

aio-dio-no-readahead.patch
  aio O_DIRECT no readahead

lock_buffer_wq-fix.patch
  lock_buffer_wq fix

unuse_mm-locked.patch
  AIO: hold the context lock across unuse_mm

aio-take-task_lock.patch
  From: Suparna Bhattacharya <suparna@in.ibm.com>
  Subject: Re: 2.5.72-mm1 - Under heavy testing with AIO,.. vmstat seems to blow the kernel

aio-O_SYNC-fix.patch
  Unify o_sync changes for aio and regular writes

O_SYNC-speedup-nolock-fix.patch

aio-remove-lseek-triggerable-BUG_ONs.patch

aio-readahead-rework.patch
  Unified page range readahead for aio and regular reads

aio-readahead-speedup.patch
  Readahead issues and AIO read speedup

pcnet32 oops patches (was Re: 2.6.0-test4-mm1)

[Barry K. Nathan]

On Sun, Aug 24, 2003 at 05:13:18PM -0700, Andrew Morton wrote:
> +pcnet32-unregister_pci-fix.patch
> 
>  rmmod crash fix

Here's another (conflicting) patch by the same author:
http://bugme.osdl.org/attachment.cgi?id=684&action=view

There's an oops I'm having (bugzilla bug 976 -- basically, after
modprobing pcnet32 on a box without pcnet32 hardware, the next ethernet
driver to be modprobed blows up) which is not fixed by the patch in
test4-mm1, but which is fixed by attachment 684...

-Barry K. Nathan <barryn@pobox.com>

Re: pcnet32 oops patches (was Re: 2.6.0-test4-mm1)

[Domen Puncer]

On Monday 25 of August 2003 08:16, Barry K. Nathan wrote:
> On Sun, Aug 24, 2003 at 05:13:18PM -0700, Andrew Morton wrote:
> > +pcnet32-unregister_pci-fix.patch
> >
> >  rmmod crash fix
>
> Here's another (conflicting) patch by the same author:
> http://bugme.osdl.org/attachment.cgi?id=684&action=view
>
> There's an oops I'm having (bugzilla bug 976 -- basically, after
> modprobing pcnet32 on a box without pcnet32 hardware, the next ethernet
> driver to be modprobed blows up) which is not fixed by the patch in
> test4-mm1, but which is fixed by attachment 684...

That patch in test4-mm1... someone must have made my patch shorter...
and looks like he/she broke it. :-(

	Domen

2.6.0-test4-mm1: wl3501_cs.c doesn't compile

[Adrian Bunk]

I got the following compile error in 2.6.0-test4-mm1:

<--  snip  -->

...
  CC      drivers/net/wireless/wl3501_cs.o
drivers/net/wireless/wl3501_cs.c: In function `wl3501_mgmt_join':
drivers/net/wireless/wl3501_cs.c:641: unknown field `id' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:641: warning: missing braces around 
initializer
drivers/net/wireless/wl3501_cs.c:641: warning: (near initialization for 
`sig.ds_pset.el')
drivers/net/wireless/wl3501_cs.c:642: unknown field `el' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:643: unknown field `chan' specified in 
initializer
drivers/net/wireless/wl3501_cs.c: In function `wl3501_mgmt_start':
drivers/net/wireless/wl3501_cs.c:658: unknown field `id' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:658: warning: missing braces around 
initializer
drivers/net/wireless/wl3501_cs.c:658: warning: (near initialization for 
`sig.ds_pset.el')
drivers/net/wireless/wl3501_cs.c:659: unknown field `el' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:660: unknown field `chan' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:663: unknown field `id' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:664: unknown field `el' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:665: unknown field `data_rate_labels' 
specified in initializer
drivers/net/wireless/wl3501_cs.c:673: unknown field `id' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:674: unknown field `el' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:675: unknown field `data_rate_labels' 
specified in initializer
drivers/net/wireless/wl3501_cs.c:683: unknown field `id' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:684: unknown field `el' specified in 
initializer
drivers/net/wireless/wl3501_cs.c:685: unknown field `atim_window' 
specified in initializer
drivers/net/wireless/wl3501_cs.c: In function 
`wl3501_mgmt_scan_confirm':
drivers/net/wireless/wl3501_cs.c:702: parse error before `)'
drivers/net/wireless/wl3501_cs.c:705: parse error before `)'
drivers/net/wireless/wl3501_cs.c:740: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function `wl3501_mgmt_auth':
drivers/net/wireless/wl3501_cs.c:899: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function `wl3501_mgmt_association':
drivers/net/wireless/wl3501_cs.c:913: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function 
`wl3501_mgmt_join_confirm':
drivers/net/wireless/wl3501_cs.c:923: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function 
`wl3501_md_confirm_interrupt':
drivers/net/wireless/wl3501_cs.c:982: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function 
`wl3501_get_confirm_interrupt':
drivers/net/wireless/wl3501_cs.c:1038: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function 
`wl3501_start_confirm_interrupt':
drivers/net/wireless/wl3501_cs.c:1050: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function 
`wl3501_assoc_confirm_interrupt':
drivers/net/wireless/wl3501_cs.c:1062: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function 
`wl3501_auth_confirm_interrupt':
drivers/net/wireless/wl3501_cs.c:1074: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function `wl3501_rx_interrupt':
drivers/net/wireless/wl3501_cs.c:1090: parse error before `)'
drivers/net/wireless/wl3501_cs.c: In function `wl3501_exit_module':
drivers/net/wireless/wl3501_cs.c:2350: parse error before `)'
make[3]: *** [drivers/net/wireless/wl3501_cs.o] Error 1


<--  snip  -->


cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

Re: 2.6.0-test4-mm1: wl3501_cs.c doesn't compile

[Arnaldo Carvalho de Melo]

Em Mon, Aug 25, 2003 at 07:30:07PM +0200, Adrian Bunk escreveu:
> I got the following compile error in 2.6.0-test4-mm1:

I'm checking this now...

- Arnaldo

Re: 2.6.0-test4-mm1: wl3501_cs.c doesn't compile

[Arnaldo Carvalho de Melo]

Em Mon, Aug 25, 2003 at 02:46:27PM -0300, Arnaldo C. Melo escreveu:
> Em Mon, Aug 25, 2003 at 07:30:07PM +0200, Adrian Bunk escreveu:
> > I got the following compile error in 2.6.0-test4-mm1:
> 
> I'm checking this now...

Problem doesn't exists in 2.6.0-test4 vanilla (ok, it has patch-2.6.0-test4-pa2
the latest parisc patchset, but it doesn't touches what we're looking at here),
now to test 2.6.0-test4-mm1...

Ah, compiling it as a module.

- Arnaldo

Re: 2.6.0-test4-mm1: wl3501_cs.c doesn't compile

[Arnaldo Carvalho de Melo]

Em Mon, Aug 25, 2003 at 03:24:42PM -0300, Arnaldo C. Melo escreveu:
> Em Mon, Aug 25, 2003 at 02:46:27PM -0300, Arnaldo C. Melo escreveu:
> > Em Mon, Aug 25, 2003 at 07:30:07PM +0200, Adrian Bunk escreveu:
> > > I got the following compile error in 2.6.0-test4-mm1:
> > 
> > I'm checking this now...
> 
> Problem doesn't exists in 2.6.0-test4 vanilla (ok, it has patch-2.6.0-test4-pa2
> the latest parisc patchset, but it doesn't touches what we're looking at here),
> now to test 2.6.0-test4-mm1...
> 
> Ah, compiling it as a module.

No problems with 2.6.0-test4-mm1 (also with the patch-2.6.0-test4-pa2 parisc
patchset), could you please send your .config to me?

- Arnaldo

Re: 2.6.0-test4-mm1: wl3501_cs.c doesn't compile

[Adrian Bunk]

[-- Attachment #1: Type: text/plain, Size: 1171 bytes --]

On Mon, Aug 25, 2003 at 03:39:48PM -0300, Arnaldo Carvalho de Melo wrote:
> Em Mon, Aug 25, 2003 at 03:24:42PM -0300, Arnaldo C. Melo escreveu:
> > Em Mon, Aug 25, 2003 at 02:46:27PM -0300, Arnaldo C. Melo escreveu:
> > > Em Mon, Aug 25, 2003 at 07:30:07PM +0200, Adrian Bunk escreveu:
> > > > I got the following compile error in 2.6.0-test4-mm1:
> > > 
> > > I'm checking this now...
> > 
> > Problem doesn't exists in 2.6.0-test4 vanilla (ok, it has patch-2.6.0-test4-pa2
> > the latest parisc patchset, but it doesn't touches what we're looking at here),
> > now to test 2.6.0-test4-mm1...
> > 
> > Ah, compiling it as a module.
> 
> No problems with 2.6.0-test4-mm1 (also with the patch-2.6.0-test4-pa2 parisc
> patchset), could you please send your .config to me?

It's attached.

I traced the problem down to the gcc version: The file compiles with
gcc 3.3 but fails to compile with gcc 2.95.

> - Arnaldo

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 48392 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN is not set

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y

#
# Loadable module support
#
# CONFIG_MODULES is not set

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
CONFIG_MK6=y
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_4G=y
CONFIG_X86_SWITCH_PAGETABLES=y
CONFIG_X86_4G_VM_LAYOUT=y
CONFIG_X86_UACCESS_INDIRECT=y
CONFIG_X86_HIGH_ENTRY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_TOSHIBA=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
# CONFIG_NUMA is not set
CONFIG_HIGHPTE=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI_HT=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_ASUS=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_PROC_INTF=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_24_API=y
CONFIG_CPU_FREQ_TABLE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=y

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
CONFIG_MCA_PROC_FS=y
CONFIG_SCx200=y
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_YENTA=y
CONFIG_CARDBUS=y
CONFIG_I82092=y
CONFIG_I82365=y
CONFIG_TCIC=y
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Generic Driver Options
#
CONFIG_FW_LOADER=y

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_B1=y
CONFIG_MTD_CFI_B2=y
CONFIG_MTD_CFI_B4=y
CONFIG_MTD_CFI_B8=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_AMDSTD=y
CONFIG_MTD_SHARP=y
CONFIG_MTD_JEDEC=y

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=2
CONFIG_MTD_PNC2000=y
CONFIG_MTD_SC520CDP=y
CONFIG_MTD_NETSC520=y
CONFIG_MTD_SBC_GXX=y
CONFIG_MTD_ELAN_104NC=y
CONFIG_MTD_OCTAGON=y
CONFIG_MTD_VMAX=y
CONFIG_MTD_SCx200_DOCFLASH=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICH2ROM=y
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
CONFIG_MTD_DILNETPC=y
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=y
CONFIG_MTD_PCI=y

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0x0

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=y
CONFIG_MTD_DOC2001=y
CONFIG_MTD_DOC2001PLUS=y
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y

#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_IDS=y

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=y
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_PS2=y
CONFIG_BLK_DEV_XD=y
CONFIG_PARIDE=y
CONFIG_PARIDE_PARPORT=y

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=y
CONFIG_PARIDE_PCD=y
CONFIG_PARIDE_PF=y
CONFIG_PARIDE_PT=y
CONFIG_PARIDE_PG=y

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=y
CONFIG_PARIDE_BPCK=y
CONFIG_PARIDE_BPCK6=y
CONFIG_PARIDE_COMM=y
CONFIG_PARIDE_DSTR=y
CONFIG_PARIDE_FIT2=y
CONFIG_PARIDE_FIT3=y
CONFIG_PARIDE_EPAT=y
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=y
CONFIG_PARIDE_FRIQ=y
CONFIG_PARIDE_FRPW=y
CONFIG_PARIDE_KBIC=y
CONFIG_PARIDE_KTTI=y
CONFIG_PARIDE_ON20=y
CONFIG_PARIDE_ON26=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_HD_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDE_TCQ=y
CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y
CONFIG_BLK_DEV_IDE_TCQ_DEPTH=8
CONFIG_BLK_DEV_IDEDMA_FORCED=y
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_IDEDMA_PCI_WIP=y
CONFIG_IDEDMA_NEW_DRIVE_LISTINGS=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_WDC_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT34X=y
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_SC1200=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_NS87415=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDE_CHIPSETS=y

#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=y
CONFIG_BLK_DEV_ALI14XX=y
CONFIG_BLK_DEV_DTC2278=y
CONFIG_BLK_DEV_HT6560B=y
CONFIG_BLK_DEV_PDC4030=y
CONFIG_BLK_DEV_QD65XX=y
CONFIG_BLK_DEV_UMC8672=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_HD=y

#
# SCSI device support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_7000FASST=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_PROBE_EISA_VL=y
CONFIG_AIC7XXX_BUILD_FIRMWARE=y
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_BUILD_FIRMWARE=y
CONFIG_AIC79XX_ENABLE_RD_STRM=y
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_IN2000=y
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_MEGARAID=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
CONFIG_SCSI_CPQFCTS=y
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_DTC3280=y
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_PIO=y
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_FD_MCS=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IBMMCA=y
CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
CONFIG_IBMMCA_SCSI_DEV_RESET=y
CONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_NCR53C406A=y
CONFIG_SCSI_NCR_D700=y
CONFIG_53C700_IO_MAPPED=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_IOMAPPED=y
CONFIG_SCSI_NCR_Q720=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
CONFIG_SCSI_NCR53C8XX_PROFILE=y
CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT=y
CONFIG_SCSI_MCA_53C9X=y
CONFIG_SCSI_PAS16=y
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
CONFIG_SCSI_PSI240I=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_ISP=y
CONFIG_SCSI_QLOGIC_FC=y
CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_SEAGATE is not set
CONFIG_SCSI_SIM710=y
CONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=y
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_T128=y
CONFIG_SCSI_U14_34F=y
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=y
CONFIG_SCSI_NSP32=y
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_FERAL_ISP=y

#
# PCMCIA SCSI adapter support
#

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_AZTCD=y
CONFIG_GSCD=y
# CONFIG_SBPCD is not set
CONFIG_MCD=y
CONFIG_MCD_IRQ=11
CONFIG_MCD_BASE=0x300
CONFIG_MCDX=y
CONFIG_OPTCD=y
# CONFIG_CM206 is not set
CONFIG_SJCD=y
CONFIG_ISP16_CDI=y
# CONFIG_CDU31A is not set
# CONFIG_CDU535 is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
CONFIG_MD_MULTIPATH=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_IOCTL_V4=y

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_BOOT=y
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_LAN=y

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_IEEE1394_OUI_DB=y

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_CMP=y
CONFIG_IEEE1394_AMDTP=y

#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_PCI=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_TUNNEL=y
CONFIG_DECNET=y
CONFIG_DECNET_SIOCGIFCONF=y
CONFIG_DECNET_ROUTER=y
CONFIG_DECNET_ROUTE_FWMARK=y
CONFIG_BRIDGE=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=y
CONFIG_IP_NF_TFTP=y
CONFIG_IP_NF_AMANDA=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_MATCH_PHYSDEV=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=y
CONFIG_IP_NF_NAT_IRC=y
CONFIG_IP_NF_NAT_FTP=y
CONFIG_IP_NF_NAT_TFTP=y
CONFIG_IP_NF_NAT_AMANDA=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_LIMIT=y
CONFIG_IP6_NF_MATCH_MAC=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_MULTIPORT=y
CONFIG_IP6_NF_MATCH_OWNER=y
CONFIG_IP6_NF_MATCH_MARK=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_AHESP=y
CONFIG_IP6_NF_MATCH_LENGTH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_TARGET_MARK=y

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=y

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
CONFIG_IP_SCTP=y
CONFIG_SCTP_ADLER32=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_VLAN_8021Q=y
CONFIG_LLC=y
CONFIG_LLC_UI=y
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_LTPC=y
CONFIG_COPS=y
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_NET_DIVERT=y
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=y
CONFIG_NET_FASTROUTE=y
CONFIG_NET_HW_FLOWCONTROL=y

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_CSZ=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_ISA=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_ETHERTAP=y
CONFIG_NET_SB1000=y

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=y
CONFIG_EL2=y
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_EL3=y
CONFIG_3C515=y
CONFIG_ELMC=y
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=y
CONFIG_ULTRAMCA=y
CONFIG_ULTRA=y
CONFIG_ULTRA32=y
CONFIG_SMC9194=y
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=y
CONFIG_NI52=y
CONFIG_NI65=y

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_PCMCIA_XIRCOM=y
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
CONFIG_NET_ISA=y
CONFIG_E2100=y
CONFIG_EWRK3=y
CONFIG_EEXPRESS=y
CONFIG_EEXPRESS_PRO=y
CONFIG_HPLAN_PLUS=y
CONFIG_HPLAN=y
CONFIG_LP486E=y
CONFIG_ETH16I=y
CONFIG_NE2000=y
CONFIG_ZNET=y
CONFIG_SEEQ8005=y
CONFIG_SKMC=y
CONFIG_NE2_MCA=y
CONFIG_IBMLANA=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_AC3200=y
CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_CS89x0=y
CONFIG_DGRS=y
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=y
CONFIG_LNE390=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_NE3210=y
CONFIG_ES3210=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=y
CONFIG_EPIC100=y
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
CONFIG_DE600=y
CONFIG_DE620=y

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
CONFIG_SIS190=y
CONFIG_SK98LIN=y
CONFIG_CONFIG_SK98LIN_T1=y
CONFIG_CONFIG_SK98LIN_T2=y
CONFIG_CONFIG_SK98LIN_T3=y
CONFIG_CONFIG_SK98LIN_T4=y
CONFIG_CONFIG_SK98LIN_T5=y
CONFIG_CONFIG_SK98LIN_T6=y
CONFIG_CONFIG_SK98LIN_T7=y
CONFIG_CONFIG_SK98LIN_T8=y
CONFIG_CONFIG_SK98LIN_T9=y
CONFIG_TIGON3=y

#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=y
CONFIG_IXGB_NAPI=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_SKFP=y
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPPOE=y
CONFIG_PPPOATM=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=y
CONFIG_ARLAN=y
CONFIG_WAVELAN=y
CONFIG_PCMCIA_WAVELAN=y
CONFIG_PCMCIA_NETWAVE=y

#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=y

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_AIRO=y
CONFIG_HERMES=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_PCI_HERMES=y

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=y
CONFIG_AIRO_CS=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_PCMCIA_WL3501=y
CONFIG_NET_WIRELESS=y

#
# Token Ring devices (depends on LLC=y)
#
CONFIG_TR=y
CONFIG_IBMTR=y
CONFIG_IBMOL=y
CONFIG_IBMLS=y
CONFIG_3C359=y
CONFIG_TMS380TR=y
CONFIG_TMSPCI=y
CONFIG_SKISA=y
CONFIG_PROTEON=y
CONFIG_ABYSS=y
CONFIG_MADGEMC=y
CONFIG_SMCTR=y
CONFIG_NET_FC=y
# CONFIG_IPHASE5526 is not set
CONFIG_RCPCI=y
CONFIG_SHAPER=y

#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_LANMEDIA=y
CONFIG_SYNCLINK_SYNCPPP=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PC300=y
CONFIG_PC300_MLPPP=y
CONFIG_N2=y
CONFIG_C101=y
CONFIG_FARSYNC=y
CONFIG_DLCI=y
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
# CONFIG_SDLA is not set
CONFIG_WAN_ROUTER_DRIVERS=y
# CONFIG_VENDOR_SANGOMA is not set
CONFIG_CYCLADES_SYNC=y
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=y
CONFIG_X25_ASY=y
# CONFIG_SBNI is not set

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_PCMCIA_PCNET=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=y
CONFIG_ARCNET_COM20020_CS=y

#
# ATM drivers
#
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_FIRESTREAM=y
CONFIG_ATM_ZATM=y
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=y
CONFIG_ATM_HORIZON_DEBUG=y
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E_MAYBE=y
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=y
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y

#
# Amateur Radio support
#
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
# CONFIG_DMASCC is not set
CONFIG_SCC=y
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_BAYCOM_EPP=y
CONFIG_YAM=y

#
# IrDA (infrared) support
#
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRNET=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=y
CONFIG_ACTISYS_DONGLE=y
CONFIG_TEKRAM_DONGLE=y

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=y

#
# Old Serial dongle support
#
CONFIG_DONGLE_OLD=y
CONFIG_ESI_DONGLE_OLD=y
CONFIG_ACTISYS_DONGLE_OLD=y
CONFIG_TEKRAM_DONGLE_OLD=y
CONFIG_GIRBIL_DONGLE=y
CONFIG_LITELINK_DONGLE=y
CONFIG_MCP2120_DONGLE=y
CONFIG_OLD_BELKIN_DONGLE=y
CONFIG_ACT200L_DONGLE=y
CONFIG_MA600_DONGLE=y

#
# FIR device drivers
#
CONFIG_USB_IRDA=y
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
# CONFIG_TOSHIBA_OLD is not set
CONFIG_TOSHIBA_FIR=y
CONFIG_SMC_IRCC_OLD=y
CONFIG_SMC_IRCC_FIR=y
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_VIA_FIR=y

#
# ISDN subsystem
#
CONFIG_ISDN_BOOL=y

#
# Old ISDN4Linux
#
# CONFIG_ISDN is not set

#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=y

#
# CAPI hardware drivers
#

#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_C4 is not set

#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y

#
# Telephony Support
#
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=y
CONFIG_PHONE_IXJ_PCMCIA=y

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_TSDEV=y
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input I/O drivers
#
CONFIG_GAMEPORT=y
CONFIG_SOUND_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_VORTEX=y
CONFIG_GAMEPORT_FM801=y
CONFIG_GAMEPORT_CS461x=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_INPORT=y
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDDLER=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_INPUT_JOYDUMP=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_N_HDLC=y
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_TIPAR=y

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_PROSAVAGE=y
CONFIG_I2C_PHILIPSPAR=y
CONFIG_I2C_ELV=y
CONFIG_I2C_VELLEMAN=y
CONFIG_SCx200_I2C=y
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ELEKTOR=y
CONFIG_I2C_CHARDEV=y

#
# I2C Hardware Sensors Mainboard support
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISA=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIAPRO=y

#
# I2C Hardware Sensors Chip support
#
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_W83781D=y
CONFIG_I2C_SENSOR=y

#
# Mice
#
CONFIG_BUSMOUSE=y
CONFIG_QIC02_TAPE=y
CONFIG_QIC02_DYNCONF=y

#
# Setting runtime QIC-02 configuration is done with qic02conf
#

#
# from the tpqic02-support package.  It is available at
#

#
# metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/
#

#
# IPMI
#
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_KCS=y
CONFIG_IPMI_WATCHDOG=y

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_SOFT_WATCHDOG=y
CONFIG_WDT=y
CONFIG_WDT_501=y
CONFIG_WDT_501_FAN=y
CONFIG_WDTPCI=y
CONFIG_WDT_501_PCI=y
CONFIG_PCWATCHDOG=y
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
CONFIG_EUROTECH_WDT=y
CONFIG_IB700_WDT=y
CONFIG_I810_TCO=y
CONFIG_MIXCOMWD=y
CONFIG_SCx200_WDT=y
CONFIG_60XX_WDT=y
CONFIG_W83877F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SC520_WDT=y
CONFIG_AMD7XX_TCO=y
CONFIG_ALIM7101_WDT=y
CONFIG_SC1200_WDT=y
CONFIG_WAFER_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_DTLK=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD_8151=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_GAMMA=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=y
CONFIG_DRM_I830=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_HANGCHECK_TIMER=y

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y

#
# Video For Linux
#

#
# Video Adapters
#
CONFIG_VIDEO_BT848=y
CONFIG_VIDEO_PMS=y
CONFIG_VIDEO_BWQCAM=y
CONFIG_VIDEO_CQCAM=y
CONFIG_VIDEO_W9966=y
CONFIG_VIDEO_CPIA=y
CONFIG_VIDEO_CPIA_PP=y
CONFIG_VIDEO_CPIA_USB=y
CONFIG_VIDEO_SAA5249=y
CONFIG_TUNER_3036=y
CONFIG_VIDEO_STRADIS=y
CONFIG_VIDEO_ZORAN=y
CONFIG_VIDEO_ZORAN_BUZ=y
CONFIG_VIDEO_ZORAN_DC10=y
CONFIG_VIDEO_ZORAN_DC30=y
CONFIG_VIDEO_ZORAN_LML33=y
CONFIG_VIDEO_ZORAN_LML33R10=y
# CONFIG_VIDEO_ZR36120 is not set
CONFIG_VIDEO_MEYE=y
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_MXB=y
CONFIG_VIDEO_DPC=y
CONFIG_VIDEO_HEXIUM_ORION=y
CONFIG_VIDEO_HEXIUM_GEMINI=y

#
# Radio Adapters
#
CONFIG_RADIO_CADET=y
CONFIG_RADIO_RTRACK=y
CONFIG_RADIO_RTRACK_PORT=0x20f
CONFIG_RADIO_RTRACK2=y
CONFIG_RADIO_RTRACK2_PORT=0x30c
CONFIG_RADIO_AZTECH=y
CONFIG_RADIO_AZTECH_PORT=0x350
CONFIG_RADIO_GEMTEK=y
CONFIG_RADIO_GEMTEK_PORT=0x34c
CONFIG_RADIO_GEMTEK_PCI=y
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_MAESTRO=y
CONFIG_RADIO_MIROPCM20=y
CONFIG_RADIO_MIROPCM20_RDS=y
CONFIG_RADIO_SF16FMI=y
CONFIG_RADIO_TERRATEC=y
CONFIG_RADIO_TERRATEC_PORT=0x590
CONFIG_RADIO_TRUST=y
CONFIG_RADIO_TRUST_PORT=0x350
CONFIG_RADIO_TYPHOON=y
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_TYPHOON_PORT=0x316
CONFIG_RADIO_TYPHOON_MUTEFREQ=87500
CONFIG_RADIO_ZOLTRIX=y
CONFIG_RADIO_ZOLTRIX_PORT=0x20c

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=y

#
# Supported Frontend Modules
#
CONFIG_DVB_STV0299=y
CONFIG_DVB_ALPS_BSRV2=y
CONFIG_DVB_ALPS_TDLB7=y
CONFIG_DVB_ALPS_TDMB7=y
CONFIG_DVB_ATMEL_AT76C651=y
CONFIG_DVB_CX24110=y
CONFIG_DVB_GRUNDIG_29504_491=y
CONFIG_DVB_GRUNDIG_29504_401=y
CONFIG_DVB_MT312=y
CONFIG_DVB_VES1820=y
# CONFIG_DVB_TDA1004X is not set

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=y
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=y
CONFIG_DVB_BUDGET_CI=y
CONFIG_DVB_BUDGET_AV=y
CONFIG_DVB_BUDGET_PATCH=y

#
# Supported USB Adapters
#
CONFIG_DVB_TTUSB_BUDGET=y
# CONFIG_DVB_TTUSB_DEC is not set

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_SKYSTAR=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_VIDEOBUF=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_BUF=y
CONFIG_VIDEO_BTCX=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVFS_DEBUG=y
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_HFS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS_FS=y
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_NAND=y
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX4FS_RW=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=y
CONFIG_INTERMEZZO_FS=y
CONFIG_AFS_FS=y
CONFIG_RXRPC=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_NEC98_PARTITION=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB_HGA=y
CONFIG_FB_RIVA=y
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G450=y
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_XL_INIT=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_3DFX=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_TRIDENT=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_VIRTUAL=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_MDA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
CONFIG_SND_DEBUG_DETECT=y

#
# Generic devices
#
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y

#
# ISA devices
#
CONFIG_SND_AD1816A=y
CONFIG_SND_AD1848=y
CONFIG_SND_CS4231=y
CONFIG_SND_CS4232=y
CONFIG_SND_CS4236=y
CONFIG_SND_ES968=y
CONFIG_SND_ES1688=y
CONFIG_SND_ES18XX=y
CONFIG_SND_GUSCLASSIC=y
CONFIG_SND_GUSEXTREME=y
CONFIG_SND_GUSMAX=y
CONFIG_SND_INTERWAVE=y
CONFIG_SND_INTERWAVE_STB=y
CONFIG_SND_OPTI92X_AD1848=y
CONFIG_SND_OPTI92X_CS4231=y
CONFIG_SND_OPTI93X=y
CONFIG_SND_SB8=y
CONFIG_SND_SB16=y
CONFIG_SND_SBAWE=y
CONFIG_SND_SB16_CSP=y
CONFIG_SND_WAVEFRONT=y
CONFIG_SND_ALS100=y
CONFIG_SND_AZT2320=y
CONFIG_SND_CMI8330=y
CONFIG_SND_DT019X=y
CONFIG_SND_OPL3SA2=y
CONFIG_SND_SGALAXY=y
CONFIG_SND_SSCAPE=y

#
# PCI devices
#
CONFIG_SND_ALI5451=y
CONFIG_SND_AZT3328=y
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS4281=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_KORG1212=y
CONFIG_SND_NM256=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_HDSP=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_YMFPCI=y
CONFIG_SND_ALS4000=y
CONFIG_SND_CMIPCI=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_MAESTRO3=y
CONFIG_SND_FM801=y
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_SONICVIBES=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VX222=y

#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=y

#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=y
CONFIG_SND_VXP440=y

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_BT878=y
CONFIG_SOUND_CMPCI=y
CONFIG_SOUND_CMPCI_FM=y
CONFIG_SOUND_CMPCI_FMIO=0x388
CONFIG_SOUND_CMPCI_MIDI=y
CONFIG_SOUND_CMPCI_MPUIO=0x330
CONFIG_SOUND_CMPCI_JOYSTICK=y
CONFIG_SOUND_CMPCI_CM8738=y
CONFIG_SOUND_CMPCI_SPDIFINVERSE=y
CONFIG_SOUND_CMPCI_SPDIFLOOP=y
CONFIG_SOUND_CMPCI_SPEAKERS=2
CONFIG_SOUND_EMU10K1=y
CONFIG_MIDI_EMU10K1=y
CONFIG_SOUND_FUSION=y
CONFIG_SOUND_CS4281=y
CONFIG_SOUND_ES1370=y
CONFIG_SOUND_ES1371=y
CONFIG_SOUND_ESSSOLO1=y
CONFIG_SOUND_MAESTRO=y
CONFIG_SOUND_MAESTRO3=y
CONFIG_SOUND_ICH=y
CONFIG_SOUND_RME96XX=y
CONFIG_SOUND_SONICVIBES=y
CONFIG_SOUND_TRIDENT=y
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=y
CONFIG_MIDI_VIA82CXXX=y
CONFIG_SOUND_OSS=y
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_AD1816=y
CONFIG_SOUND_AD1889=y
CONFIG_SOUND_SGALAXY=y
CONFIG_SOUND_ADLIB=y
CONFIG_SOUND_ACI_MIXER=y
CONFIG_SOUND_CS4232=y
CONFIG_SOUND_SSCAPE=y
CONFIG_SOUND_GUS=y
CONFIG_SOUND_GUS16=y
CONFIG_SOUND_GUSMAX=y
CONFIG_SOUND_VMIDI=y
CONFIG_SOUND_TRIX=y
# CONFIG_TRIX_HAVE_BOOT is not set
CONFIG_SOUND_MSS=y
CONFIG_SOUND_MPU401=y
CONFIG_SOUND_NM256=y
CONFIG_SOUND_MAD16=y
CONFIG_MAD16_OLDCARD=y
CONFIG_SOUND_PAS=y
CONFIG_PAS_JOYSTICK=y
CONFIG_SOUND_PSS=y
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=y
CONFIG_SOUND_AWE32_SYNTH=y
CONFIG_SOUND_MAUI=y
# CONFIG_MAUI_HAVE_BOOT is not set
CONFIG_SOUND_YM3812=y
CONFIG_SOUND_OPL3SA1=y
CONFIG_SOUND_OPL3SA2=y
CONFIG_SOUND_YMFPCI=y
CONFIG_SOUND_YMFPCI_LEGACY=y
CONFIG_SOUND_UART6850=y
CONFIG_SOUND_AEDSP16=y
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
CONFIG_AEDSP16_SBPRO=y
CONFIG_AEDSP16_MPU401=y
CONFIG_SOUND_TVMIXER=y
CONFIG_SOUND_KAHLUA=y
CONFIG_SOUND_ALI5455=y
CONFIG_SOUND_FORTE=y
CONFIG_SOUND_AD1980=y

#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=y

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
CONFIG_USB_MIDI=y
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=y
CONFIG_USB_WACOM=y
CONFIG_USB_KBTAB=y
CONFIG_USB_POWERMATE=y
CONFIG_USB_XPAD=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_SCANNER=y
CONFIG_USB_MICROTEK=y
CONFIG_USB_HPUSBSCSI=y

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=y
CONFIG_USB_VICAM=y
CONFIG_USB_DSBR=y
CONFIG_USB_IBMCAM=y
CONFIG_USB_KONICAWC=y
CONFIG_USB_OV511=y
CONFIG_USB_PWC=y
CONFIG_USB_SE401=y
CONFIG_USB_STV680=y

#
# USB Network adaptors
#
CONFIG_USB_AX8817X=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y

#
# USB Host-to-Host Cables
#
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y

#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y

#
# USB port drivers
#
CONFIG_USB_USS720=y

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_DEBUG=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI26=y
CONFIG_USB_TIGL=y
CONFIG_USB_AUERSWALD=y
CONFIG_USB_RIO500=y
CONFIG_USB_BRLVGER=y
CONFIG_USB_LCD=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_TEST=y
CONFIG_USB_GADGET=y
CONFIG_USB_NET2280=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_NET2280=y

#
# Bluetooth support
#
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=y
CONFIG_BT_USB_SCO=y
CONFIG_BT_USB_ZERO_PACKET=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_IOVIRT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SPINLINE is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_MLS=y

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_TEST=y

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y

Re: 2.6.0-test4-mm1: wl3501_cs.c doesn't compile

[Arnaldo Carvalho de Melo]

Em Tue, Aug 26, 2003 at 12:01:08AM +0200, Adrian Bunk escreveu:
> It's attached.

Not needed as per what you said below :)

> I traced the problem down to the gcc version: The file compiles with
> gcc 3.3 but fails to compile with gcc 2.95.

I see, I'll fix this one, I had a problem with this in another source file,
IIRC. Die, gcc 2.95 die! :-)

- Arnaldo

[BUG] 2.6.0-test4-mm1: NFS+XFS=data corruption

[Barry K. Nathan]

I'm really short on time right now, so this bug report might be vague,
but it's important enough for me to try:

I have an NFS fileserver (running 2.6.0-test4-mm1) exporting stuff from
three filesystems: ReiserFS, ext3, and XFS. I'm seeing no problems with
my ReiserFS and ext3 filesystems. XFS is a different story.

My client machine is running 2.4.21bkn1 (my own kernel, not released to
the public; the differences from vanilla 2.4.21 are XFS and Win4Lin). 

If I use my client machine to sign RPM packages (rpm --addsign ...),
using rpm-4.2-16mdk, and the packages are on the XFS partition on the
NFS server, about half of the packages are truncated by a couple hundred
bytes afterwards (and GPG sig verification fails on those packages).

It's always the same packages that get truncated by the same amounts of
data. This is 100% reproducible. It doesn't matter whether I compile the
kernel with gcc 2.95.3 or 3.1.1. If I perform the operation on my non-XFS
filesystem the problem doesn't happen. If I run 2.6.0-test4-bk2 instead of
test4-mm1 on the NFS server, the problem goes away. (I have never run
any previous -mm kernels on this server.)

Hmmm... If I sign the packages on the NFS server itself, even with
test4-mm1 on the XFS partition, I can't reproduce the problem.
*However*, that's a different version of RPM (4.0.4).

Is this enough information to help find the cause of the bug? If not,
it might be several days (if I'm unlucky, maybe even a week or two)
before I have time to do anything more...

-Barry K. Nathan <barryn@pobox.com>

Re: [BUG] 2.6.0-test4-mm1: NFS+XFS=data corruption

[Andrew Morton]

"Barry K. Nathan" <barryn@pobox.com> wrote:
>
> I'm really short on time right now, so this bug report might be vague,
> but it's important enough for me to try:
> 
> I have an NFS fileserver (running 2.6.0-test4-mm1) exporting stuff from
> three filesystems: ReiserFS, ext3, and XFS. I'm seeing no problems with
> my ReiserFS and ext3 filesystems. XFS is a different story.
> 
> My client machine is running 2.4.21bkn1 (my own kernel, not released to
> the public; the differences from vanilla 2.4.21 are XFS and Win4Lin). 
> 
> If I use my client machine to sign RPM packages (rpm --addsign ...),
> using rpm-4.2-16mdk, and the packages are on the XFS partition on the
> NFS server, about half of the packages are truncated by a couple hundred
> bytes afterwards (and GPG sig verification fails on those packages).
> 
> It's always the same packages that get truncated by the same amounts of
> data. This is 100% reproducible. It doesn't matter whether I compile the
> kernel with gcc 2.95.3 or 3.1.1. If I perform the operation on my non-XFS
> filesystem the problem doesn't happen. If I run 2.6.0-test4-bk2 instead of
> test4-mm1 on the NFS server, the problem goes away. (I have never run
> any previous -mm kernels on this server.)
> 
> Hmmm... If I sign the packages on the NFS server itself, even with
> test4-mm1 on the XFS partition, I can't reproduce the problem.
> *However*, that's a different version of RPM (4.0.4).
> 
> Is this enough information to help find the cause of the bug? If not,
> it might be several days (if I'm unlucky, maybe even a week or two)
> before I have time to do anything more...
> 

-mm kernels have O_DIRECT-for-NFS patches in them.  And some versions of
RPM use O_DIRECT.  Whether O_DIRECT makes any difference at the server end
I do not know, but it would be useful if you could repeat the test on stock
2.6.0-test4.

Alternatively, run

	export LD_ASSUME_KERNEL=2.2.5

before running RPM.  I think that should tell RPM to not try O_DIRECT.

Re: [BUG] 2.6.0-test4-mm1: NFS+XFS=data corruption

[Steve Lord]

On Mon, 2003-08-25 at 14:45, Andrew Morton wrote:
> "Barry K. Nathan" <barryn@pobox.com> wrote:
> >
> > I'm really short on time right now, so this bug report might be vague,
> > but it's important enough for me to try:
> > 
> > I have an NFS fileserver (running 2.6.0-test4-mm1) exporting stuff from
> > three filesystems: ReiserFS, ext3, and XFS. I'm seeing no problems with
> > my ReiserFS and ext3 filesystems. XFS is a different story.
> > 
> > My client machine is running 2.4.21bkn1 (my own kernel, not released to
> > the public; the differences from vanilla 2.4.21 are XFS and Win4Lin). 
> > 
> > If I use my client machine to sign RPM packages (rpm --addsign ...),
> > using rpm-4.2-16mdk, and the packages are on the XFS partition on the
> > NFS server, about half of the packages are truncated by a couple hundred
> > bytes afterwards (and GPG sig verification fails on those packages).
> > 
> > It's always the same packages that get truncated by the same amounts of
> > data. This is 100% reproducible. It doesn't matter whether I compile the
> > kernel with gcc 2.95.3 or 3.1.1. If I perform the operation on my non-XFS
> > filesystem the problem doesn't happen. If I run 2.6.0-test4-bk2 instead of
> > test4-mm1 on the NFS server, the problem goes away. (I have never run
> > any previous -mm kernels on this server.)
> > 
> > Hmmm... If I sign the packages on the NFS server itself, even with
> > test4-mm1 on the XFS partition, I can't reproduce the problem.
> > *However*, that's a different version of RPM (4.0.4).
> > 
> > Is this enough information to help find the cause of the bug? If not,
> > it might be several days (if I'm unlucky, maybe even a week or two)
> > before I have time to do anything more...
> > 
> 
> -mm kernels have O_DIRECT-for-NFS patches in them.  And some versions of
> RPM use O_DIRECT.  Whether O_DIRECT makes any difference at the server end
> I do not know, but it would be useful if you could repeat the test on stock
> 2.6.0-test4.
> 
> Alternatively, run
> 
> 	export LD_ASSUME_KERNEL=2.2.5
> 
> before running RPM.  I think that should tell RPM to not try O_DIRECT.

I doubt the NFS client is O_DIRECT capable here, I have run some rpm
builds over nfs to 2.6.0-test4 and an xfs filesystem, everything is
behaving so far. I will try mm1 tomorrow.

Do we know if this NFS V3 or V2 by the way?

Steve

-- 

Steve Lord                                      voice: +1-651-683-3511
Principal Engineer, Filesystem Software         email: lord@sgi.com

Re: [BUG] 2.6.0-test4-mm1: NFS+XFS=data corruption

[Andrew Morton]

Steve Lord <lord@sgi.com> wrote:
>
> > > Is this enough information to help find the cause of the bug? If not,
>  > > it might be several days (if I'm unlucky, maybe even a week or two)
>  > > before I have time to do anything more...
>  > > 
>  > 
>  > -mm kernels have O_DIRECT-for-NFS patches in them.  And some versions of
>  > RPM use O_DIRECT.  Whether O_DIRECT makes any difference at the server end
>  > I do not know, but it would be useful if you could repeat the test on stock
>  > 2.6.0-test4.
>  > 
>  > Alternatively, run
>  > 
>  > 	export LD_ASSUME_KERNEL=2.2.5
>  > 
>  > before running RPM.  I think that should tell RPM to not try O_DIRECT.
> 
>  I doubt the NFS client is O_DIRECT capable here, I have run some rpm
>  builds over nfs to 2.6.0-test4 and an xfs filesystem, everything is
>  behaving so far. I will try mm1 tomorrow.
> 
>  Do we know if this NFS V3 or V2 by the way?

OK, sorry for the noise.  It appears that this is due to the AIO patches in
-mm.  fsx-linux fails instantly on nfsv3 to localhost on XFS.  It's OK on
ext2 for some reason.

Binary searching reveals that the offending patch is
O_SYNC-speedup-nolock-fix.patch

testcase:

	mkfs.xfs -f /dev/hda5
	mount /dev/hda5 /mnt/hda5
	chmod a+rw /mnt/hda5
	service nfs start
	mount localhost:/mnt/hda5 /mnt/localhost
	cd /mnt/localhost
	fsx-linux foo


truncating to largest ever: 0x13e76
READ BAD DATA: offset = 0x18f13, size = 0xee06, fname = foo
OFFSET  GOOD    BAD     RANGE
0x26000 0x02eb  0x0000  0x    0
operation# (mod 256) for the bad data unknown, check HOLE and EXTEND ops
0x26001 0xeb02  0x0000  0x    1
operation# (mod 256) for the bad data unknown, check HOLE and EXTEND ops
0x26002 0x0228  0x0000  0x    2
operation# (mod 256) for the bad data unknown, check HOLE and EXTEND ops

Re: [BUG] 2.6.0-test4-mm1: NFS+XFS=data corruption

[Suparna Bhattacharya]

On Tue, Aug 26, 2003 at 03:14:12AM -0700, Andrew Morton wrote:
> Steve Lord <lord@sgi.com> wrote:
> >
> > > > Is this enough information to help find the cause of the bug? If not,
> >  > > it might be several days (if I'm unlucky, maybe even a week or two)
> >  > > before I have time to do anything more...
> >  > > 
> >  > 
> >  > -mm kernels have O_DIRECT-for-NFS patches in them.  And some versions of
> >  > RPM use O_DIRECT.  Whether O_DIRECT makes any difference at the server end
> >  > I do not know, but it would be useful if you could repeat the test on stock
> >  > 2.6.0-test4.
> >  > 
> >  > Alternatively, run
> >  > 
> >  > 	export LD_ASSUME_KERNEL=2.2.5
> >  > 
> >  > before running RPM.  I think that should tell RPM to not try O_DIRECT.
> > 
> >  I doubt the NFS client is O_DIRECT capable here, I have run some rpm
> >  builds over nfs to 2.6.0-test4 and an xfs filesystem, everything is
> >  behaving so far. I will try mm1 tomorrow.
> > 
> >  Do we know if this NFS V3 or V2 by the way?
> 
> OK, sorry for the noise.  It appears that this is due to the AIO patches in
> -mm.  fsx-linux fails instantly on nfsv3 to localhost on XFS.  It's OK on
> ext2 for some reason.
> 
> Binary searching reveals that the offending patch is
> O_SYNC-speedup-nolock-fix.patch
> 

I'm not sure if this would help here, but there is
one bug which I just spotted which would affect writev from
XFS. I wasn't passing the nr_segs down properly.

Regards
Suparna

-- 
Suparna Bhattacharya (suparna@in.ibm.com)
Linux Technology Center
IBM Software Labs, India


--- linux-2.6.0-test4-mm1/mm/filemap.c	2003-08-26 10:09:50.000000000 +0530
+++ fix-mm/mm/filemap.c	2003-08-26 16:23:55.000000000 +0530
@@ -1942,7 +1942,7 @@ generic_file_aio_write_nolock(struct kio
 		goto osync;
 	}
 
-	ret = __generic_file_aio_write_nolock(iocb, iov, 1, ppos);
+	ret = __generic_file_aio_write_nolock(iocb, iov, nr_segs, ppos);
 
 	/*
 	 * Avoid doing a sync in parts for aio - its more efficient to

Re: [BUG] 2.6.0-test4-mm1: NFS+XFS=data corruption

[Andrew Morton]

Suparna Bhattacharya <suparna@in.ibm.com> wrote:
>
>  > Binary searching reveals that the offending patch is
>  > O_SYNC-speedup-nolock-fix.patch
>  > 
> 
>  I'm not sure if this would help here, but there is
>  one bug which I just spotted which would affect writev from
>  XFS. I wasn't passing the nr_segs down properly.

That fixes it, thanks.

Re: [BUG] 2.6.0-test4-mm1: NFS+XFS=data corruption

[Steve Lord]

On Tue, 2003-08-26 at 12:44, Andrew Morton wrote:
> Suparna Bhattacharya <suparna@in.ibm.com> wrote:
> >
> >  > Binary searching reveals that the offending patch is
> >  > O_SYNC-speedup-nolock-fix.patch
> >  > 
> > 
> >  I'm not sure if this would help here, but there is
> >  one bug which I just spotted which would affect writev from
> >  XFS. I wasn't passing the nr_segs down properly.
> 
> That fixes it, thanks.

Does rpm use readv/writev though? Or does the nfs server? not sure
how this change would affect the original problem report.

Steve

-- 

Steve Lord                                      voice: +1-651-683-3511
Principal Engineer, Filesystem Software         email: lord@sgi.com

Re: [BUG] 2.6.0-test4-mm1: NFS+XFS=data corruption

[Andrew Morton]

Steve Lord <lord@sgi.com> wrote:
>
>  Does rpm use readv/writev though? Or does the nfs server? not sure
>  how this change would affect the original problem report.

The NFS server uses multisegment writev.  RPM was running at the other end
of the ethernet, so it doesn't really matter what sort of write RPM
is issuing.

Re: 2.6.0-test4-mm1

[Martin J. Bligh]

System time is still rather higher in kernbench, though maybe the
elapsed time isn't degraded so much any more. Not sure if this is
scheduler changes or not, but last time, we isolated a change of
exactly this magnitude to one of those patches (Ingo's IIRC).

I tried "set TIMESLICE_GRANULARITY to MAX_TIMESLICE in sched.c" as
requested, makes no difference really (-max result below).

Kernbench: (make -j vmlinux, maximal tasks)
                              Elapsed      System        User         CPU
              2.6.0-test4       45.87      116.92      571.10     1499.00
          2.6.0-test4-mm1       46.29      121.39      570.52     1494.75
      2.6.0-test4-mm1-max       46.00      122.18      570.73     1505.75

diffprofile:

      7763     4.8% total
      2921     6.4% default_idle
       949     0.0% direct_strnlen_user
       719    20.6% __copy_from_user_ll
       554    10.4% __copy_to_user_ll
       544    33.5% kmem_cache_free
       425     0.0% kpmd_ctor
       372    26.1% schedule
       349    18.7% atomic_dec_and_lock
       322     4.1% __d_lookup
       318     8.6% find_get_page
       283   165.5% may_open
       279     1.2% page_remove_rmap
       275    16.0% buffered_rmqueue
       263    42.4% __wake_up
       212    15.3% free_hot_cold_page
       119     6.4% path_lookup
       117     3.7% zap_pte_range
       114     0.0% direct_strncpy_from_user
       107    17.3% generic_file_open
...
      -102    -1.6% page_add_rmap
      -122  -100.0% strncpy_from_user
      -288   -79.8% dentry_open
      -305   -66.2% do_page_cache_readahead
      -353  -100.0% pgd_ctor
      -447   -80.4% file_ra_state_init
      -558   -74.9% filp_close
      -854  -100.0% strnlen_user

Re: 2.6.0-test4-mm1

[William Lee Irwin III]

On Mon, Aug 25, 2003 at 04:10:42PM -0700, Martin J. Bligh wrote:
>       7763     4.8% total
>       2921     6.4% default_idle
>        949     0.0% direct_strnlen_user
>        719    20.6% __copy_from_user_ll
>        554    10.4% __copy_to_user_ll
>        544    33.5% kmem_cache_free
>        425     0.0% kpmd_ctor
>        372    26.1% schedule
>        349    18.7% atomic_dec_and_lock
>        322     4.1% __d_lookup
>        318     8.6% find_get_page
>        283   165.5% may_open

Hmm, seeing functions I wrote in diffprofiles like this gives me the
wli's. Any chance you could snapshot /proc/slabinfo say every 1s during
a run so I can see what's going on?


-- wli

Re: 2.6.0-test4-mm1

[Martin J. Bligh]

--William Lee Irwin III <wli@holomorphy.com> wrote (on Tuesday, August 26, 2003 03:08:24 -0700):

> On Mon, Aug 25, 2003 at 04:10:42PM -0700, Martin J. Bligh wrote:
>>       7763     4.8% total
>>       2921     6.4% default_idle
>>        949     0.0% direct_strnlen_user
>>        719    20.6% __copy_from_user_ll
>>        554    10.4% __copy_to_user_ll
>>        544    33.5% kmem_cache_free
>>        425     0.0% kpmd_ctor
>>        372    26.1% schedule
>>        349    18.7% atomic_dec_and_lock
>>        322     4.1% __d_lookup
>>        318     8.6% find_get_page
>>        283   165.5% may_open
> 
> Hmm, seeing functions I wrote in diffprofiles like this gives me the
> wli's. Any chance you could snapshot /proc/slabinfo say every 1s during
> a run so I can see what's going on?

You should be able to recreate this easily yourself, but on closer
inspection, it seems the cost is just shifted from pgd_ctor.

M.

Re: 2.6.0-test4-mm1

[William Lee Irwin III]

William Lee Irwin III <wli@holomorphy.com> wrote (on Tuesday, August 26, 2003 03:08:24 -0700):
>> Hmm, seeing functions I wrote in diffprofiles like this gives me the
>> wli's. Any chance you could snapshot /proc/slabinfo say every 1s during
>> a run so I can see what's going on?

On Tue, Aug 26, 2003 at 07:23:10AM -0700, Martin J. Bligh wrote:
> You should be able to recreate this easily yourself, but on closer
> inspection, it seems the cost is just shifted from pgd_ctor.

That's a big relief.

Thanks.


-- wli