Compile fix for ACPI in 2.4.22/x86-64

Compile fix for ACPI in 2.4.22/x86-64

[Andi Kleen]

Marcelo unfortunately added an last minute ACPI update that changed
ACPI interfaces and broke x86-64 compilation. I didn't catch it in
time, so 2.4.22 does not compile out of the box for AMD64. 

This patch fixes it.
You'll have to apply it when compiling 2.4.22 for x86-64

-Andi

----------

Update x86-64 for the ACPI interrupt link changes.

diff -u linux/arch/x86_64/kernel/io_apic.c-LINK linux/arch/x86_64/kernel/io_apic.c
--- linux/arch/x86_64/kernel/io_apic.c-LINK	2003-08-22 12:29:21.000000000 +0200
+++ linux/arch/x86_64/kernel/io_apic.c	2003-08-22 12:38:16.000000000 +0200
@@ -1762,7 +1762,7 @@
 }
 
 
-int io_apic_set_pci_routing (int ioapic, int pin, int irq)
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level ,int active_high_low)
 {
 	struct IO_APIC_route_entry entry;
 	unsigned long flags;
@@ -1785,18 +1785,21 @@
 	entry.dest_mode = INT_DELIVERY_MODE;
 	entry.dest.logical.logical_dest = TARGET_CPUS;
 	entry.mask = 1;					 /* Disabled (masked) */
-	entry.trigger = 1;				   /* Level sensitive */
-	entry.polarity = 1;					/* Low active */
+	entry.trigger = edge_level;	
+	entry.polarity = active_high_low;
 
 	add_pin_to_irq(irq, ioapic, pin);
 
 	entry.vector = assign_irq_vector(irq);
 
 	printk(KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
-		"IRQ %d)\n", ioapic, 
-		mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq);
+		"IRQ %d) Mode:%i Active:%i\n", ioapic, 
+		mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, edge_level, active_high_low);
 
-	irq_desc[irq].handler = &ioapic_level_irq_type;
+	if (edge_level)
+		irq_desc[irq].handler = &ioapic_level_irq_type;
+	else
+		irq_desc[irq].handler = &ioapic_edge_irq_type;
 
 	set_intr_gate(entry.vector, interrupt[irq]);
 
diff -u linux/arch/x86_64/kernel/mpparse.c-LINK linux/arch/x86_64/kernel/mpparse.c
--- linux/arch/x86_64/kernel/mpparse.c-LINK	2003-08-22 12:29:21.000000000 +0200
+++ linux/arch/x86_64/kernel/mpparse.c	2003-08-22 12:29:25.000000000 +0200
@@ -923,7 +923,7 @@
 
 	ioapic_pin = irq - mp_ioapic_routing[ioapic].irq_start;
 
-	io_apic_set_pci_routing(ioapic, ioapic_pin, irq);
+	io_apic_set_pci_routing(ioapic, ioapic_pin, irq, 1, 1);
 }
 
 #endif /*CONFIG_ACPI_HT_ONLY*/
@@ -939,6 +939,8 @@
 	int			ioapic_pin = 0;
 	int			irq = 0;
 	int			idx, bit = 0;
+	int			edge_level = 0;
+	int			active_high_low = 0;
 
 	/*
 	 * Parsing through the PCI Interrupt Routing Table (PRT) and program
@@ -949,11 +951,14 @@
 
 		/* Need to get irq for dynamic entry */
 		if (entry->link.handle) {
-			irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index);
+			irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
 			if (!irq)
 				continue;
-		} else
+		} else {
+			edge_level = 1;
+			active_high_low = 1;
 			irq = entry->link.index;
+		}
 
 		irq = entry->link.index;
 		ioapic = mp_find_ioapic(irq);
@@ -983,7 +988,7 @@
 
 		mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
 
-		vector = io_apic_set_pci_routing(ioapic, ioapic_pin, irq);
+		vector = io_apic_set_pci_routing(ioapic, ioapic_pin, irq, edge_level, active_high_low);
 		if (vector)
 			entry->irq = irq;
 
diff -u linux/include/asm-x86_64/io_apic.h-LINK linux/include/asm-x86_64/io_apic.h
--- linux/include/asm-x86_64/io_apic.h-LINK	2003-08-22 12:29:21.000000000 +0200
+++ linux/include/asm-x86_64/io_apic.h	2003-08-22 12:29:25.000000000 +0200
@@ -148,6 +148,6 @@
 extern int io_apic_get_unique_id (int ioapic, int apic_id);
 extern int io_apic_get_version (int ioapic);
 extern int io_apic_get_redir_entries (int ioapic);
-extern int io_apic_set_pci_routing (int ioapic, int pin, int irq);
+extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int, int);
 
 #endif