* Re: 2.6.0test4 bk1 and
@ 2003-09-05 13:59 Arkadiusz Miskiewicz
2003-09-05 15:54 ` Andrew Morton
0 siblings, 1 reply; 5+ messages in thread
From: Arkadiusz Miskiewicz @ 2003-09-05 13:59 UTC (permalink / raw)
To: linux-kernel
On Monday 25 of August 2003 15:35, Arkadiusz Miskiewicz wrote:
> Hi,
>
> Yesterday I've changed kernel from test3 to test4 with bk1 patch applied
> and such error appeared (and it's showning all the time):
>
> bad: scheduling while atomic!
> Call Trace:
> [<c0105000>] _stext+0x0/0x60
> [<c011ccd0>] schedule+0x3b0/0x3c0
> [<cf8c1257>] acpi_processor_idle+0xe9/0x1e5 [processor]
> [<c0105000>] _stext+0x0/0x60
> [<c01090eb>] cpu_idle+0x3b/0x40
> [<c0328734>] start_kernel+0x184/0x1b0
> [<c0328480>] unknown_bootoption+0x0/0x100
Nothing about this has changed in test4bk3 nor test4bk6. Still yells about
,,scheduling while atomic''.
No one has idea what's happening here? Some change between test3 and test4
did this.
--
Arkadiusz Miśkiewicz CS at FoE, Wroclaw University of Technology
arekm.pld-linux.org AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PLD/Linux
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.6.0test4 bk1 and
2003-09-05 13:59 2.6.0test4 bk1 and Arkadiusz Miskiewicz
@ 2003-09-05 15:54 ` Andrew Morton
2003-09-07 19:11 ` Arkadiusz Miskiewicz
0 siblings, 1 reply; 5+ messages in thread
From: Andrew Morton @ 2003-09-05 15:54 UTC (permalink / raw)
To: Arkadiusz Miskiewicz; +Cc: linux-kernel
Arkadiusz Miskiewicz <arekm@pld-linux.org> (by way of Arkadiusz Miskiewicz <arekm@pld-linux.org>) wrote:
>
> On Monday 25 of August 2003 15:35, Arkadiusz Miskiewicz wrote:
> > Hi,
> >
> > Yesterday I've changed kernel from test3 to test4 with bk1 patch applied
> > and such error appeared (and it's showning all the time):
> >
> > bad: scheduling while atomic!
> > Call Trace:
> > [<c0105000>] _stext+0x0/0x60
> > [<c011ccd0>] schedule+0x3b0/0x3c0
> > [<cf8c1257>] acpi_processor_idle+0xe9/0x1e5 [processor]
> > [<c0105000>] _stext+0x0/0x60
> > [<c01090eb>] cpu_idle+0x3b/0x40
> > [<c0328734>] start_kernel+0x184/0x1b0
> > [<c0328480>] unknown_bootoption+0x0/0x100
>
> Nothing about this has changed in test4bk3 nor test4bk6. Still yells about
> ,,scheduling while atomic''.
>
> No one has idea what's happening here? Some change between test3 and test4
> did this.
Grab the latest snapshot from
http://www.kernel.org/pub/linux/kernel/v2.5/testing/cset/ (the very first
link) and see if it's still happening.
If so then please add the `initcall_debug' option to the kernel boot command line and see if any messages such as
error in initcall at 0xNNNNNNNN: returned with preemption imbalance
come out. If they do, look up 0xNNNNNNNN in System.map.
If none of this sheds any light, please send your full .config.
Thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.6.0test4 bk1 and
2003-09-05 15:54 ` Andrew Morton
@ 2003-09-07 19:11 ` Arkadiusz Miskiewicz
2003-09-07 19:29 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 5+ messages in thread
From: Arkadiusz Miskiewicz @ 2003-09-07 19:11 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Friday 05 of September 2003 17:54, Andrew Morton wrote:
> > > bad: scheduling while atomic!
> > > Call Trace:
> > > [<c0105000>] _stext+0x0/0x60
> > > [<c011ccd0>] schedule+0x3b0/0x3c0
> > > [<cf8c1257>] acpi_processor_idle+0xe9/0x1e5 [processor]
> > > [<c0105000>] _stext+0x0/0x60
> > > [<c01090eb>] cpu_idle+0x3b/0x40
> > > [<c0328734>] start_kernel+0x184/0x1b0
> > > [<c0328480>] unknown_bootoption+0x0/0x100
> Grab the latest snapshot from
> http://www.kernel.org/pub/linux/kernel/v2.5/testing/cset/ (the very first
> link) and see if it's still happening.
I've tested test4 with changeset patch 20030906_2214 and this problem no
longer happens but there are few new like:
- ide thing
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
ide0: I/O resource 0x3F6-0x3F6 not free.
hda: ERROR, PORTS ALREADY IN USE
register_blkdev: cannot get major 3 for ide0
ide1: I/O resource 0x376-0x376 not free.
hdc: ERROR, PORTS ALREADY IN USE
register_blkdev: cannot get major 22 for ide1
Module via82cxxx cannot be unloaded due to unsafe usage in
include/linux/module.h:483
- usb thing
ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci-hcd: block sizes: ed 64 td 64
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver
v2.1
uhci-hcd 0000:00:11.2: UHCI Host Controller
irq 11: nobody cared!
Call Trace:
[<c010cbdb>] __report_bad_irq+0x2b/0x90
[<c010ccd4>] note_interrupt+0x64/0xa0
- pcmcia thing
WARNING: Loop detected:
/lib/modules/2.6.0-test4cset20030906rel0.1/kernel/drivers/pcmcia/pcmcia_core.ko
which needs pcmcia_core.ko again!
Details in separate mail(s) to LKML in few minutes.
--
Arkadiusz Miśkiewicz CS at FoE, Wroclaw University of Technology
arekm.pld-linux.org AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PLD/Linux
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.6.0test4 bk1 and
2003-09-07 19:11 ` Arkadiusz Miskiewicz
@ 2003-09-07 19:29 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 5+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2003-09-07 19:29 UTC (permalink / raw)
To: Arkadiusz Miskiewicz, Andrew Morton; +Cc: linux-kernel
IDE chipset drivers don't work (safely) as modules. Just don't do it.
On Sunday 07 of September 2003 21:11, Arkadiusz Miskiewicz wrote:
> - ide thing
> VP_IDE: IDE controller at PCI slot 0000:00:11.1
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
> ide0: I/O resource 0x3F6-0x3F6 not free.
> hda: ERROR, PORTS ALREADY IN USE
> register_blkdev: cannot get major 3 for ide0
> ide1: I/O resource 0x376-0x376 not free.
> hdc: ERROR, PORTS ALREADY IN USE
> register_blkdev: cannot get major 22 for ide1
> Module via82cxxx cannot be unloaded due to unsafe usage in
> include/linux/module.h:483
^ permalink raw reply [flat|nested] 5+ messages in thread
* 2.6.0test4 bk1 and
@ 2003-08-25 13:35 Arkadiusz Miskiewicz
0 siblings, 0 replies; 5+ messages in thread
From: Arkadiusz Miskiewicz @ 2003-08-25 13:35 UTC (permalink / raw)
To: linux-kernel
Hi,
Yesterday I've changed kernel from test3 to test4 with bk1 patch applied and
such error appeared (and it's showning all the time):
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<cf8c1257>] acpi_processor_idle+0xe9/0x1e5 [processor]
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<cf8c1257>] acpi_processor_idle+0xe9/0x1e5 [processor]
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<cf8c1257>] acpi_processor_idle+0xe9/0x1e5 [processor]
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
This is MaxData Mbook 1000T laptop with Athlon 1800+ Mobile.
[arekm@mobarm arekm]$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:08.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
00:10.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller
(rev 46)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10)
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1e)
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1e)
00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97
Audio Controller (rev 40)
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97
Modem] (rev 20)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51)
01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA
Controller (TwisterK) (rev 01)
Module Size Used by
binfmt_misc 11016 1
md5 4352 1
ipv6 254176 23
uhci_hcd 32400 0
ohci_hcd 18560 0
ds 15492 2
yenta_socket 14592 0
pcmcia_core 68960 2 ds,yenta_socket
via_rhine 22280 0
mii 5376 1 via_rhine
crc32 4608 1 via_rhine
nls_iso8859_2 4736 1
ntfs 102124 1
snd_pcm_oss 52644 1
snd_mixer_oss 19712 1 snd_pcm_oss
snd_via82xx 24928 1
snd_pcm 100772 2 snd_pcm_oss,snd_via82xx
snd_timer 26244 1 snd_pcm
snd_ac97_codec 53764 1 snd_via82xx
snd_page_alloc 12292 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7808 1 snd_via82xx
snd_rawmidi 25504 1 snd_mpu401_uart
snd_seq_device 8712 1 snd_rawmidi
snd 53988 9
snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9664 2 snd
hid 65664 0
usbmouse 5760 0
psmouse 13832 0
proc_intf 4224 0
powernow_k7 6688 0
freq_table 4612 1 powernow_k7
thermal 14224 0
processor 15012 1 thermal
fan 4364 0
button 6296 0
battery 9612 0
ac 5388 0
capability 8324 0
ide_cd 40964 0
cdrom 35872 1 ide_cd
ehci_hcd 24452 0
usbcore 111068 7 uhci_hcd,ohci_hcd,hid,usbmouse,ehci_hcd
ext3 119336 1
mbcache 9348 1 ext3
jbd 61592 1 ext3
via82cxxx 13600 1 [unsafe]
Config is here:
http://cvs.pld-linux.org/cgi-bin/cvsweb/SOURCES/kernel-ia32.config?rev=1.28.2.5.4.8
[arekm@mobarm arekm]$ cat /proc/version
Linux version 2.6.0 (builder@beton) (gcc version 3.3.1 (PLD Linux)) #1 Sun Aug
24 21:24:47 UTC 2003
Messages catched over serial console for few cases:
1) normal boot
2) single acpi=off
3) single acpi=off pci=noacpi
#######################################################################
1) normal boot
LILO 22.5.7.2 boot:
Loading pld-2.6.0........................
BIOS data check successful
Linux version 2.6.0 (builder@beton) (gcc version 3.3.1 (PLD Linux)) #1 Sun Aug
24 21:24:47 UTC 2003
Video mode to be used for restore is f07
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
BIOS-e820: 000000000eff0000 - 000000000eff8000 (ACPI data)
BIOS-e820: 000000000eff8000 - 000000000f000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
239MB LOWMEM available.
On node 0 totalpages: 61424
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 57328 pages, LIFO batch:13
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa580
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x0eff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x0eff0030
ACPI: BOOT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x0eff00c0
ACPI: DSDT (v001 VIA TwisterK 0x00001000 INTL 0x02002024) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=pld-2.6.0 ro root=303 console=ttyS0,57600n81
console=tty0
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1533.164 MHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 3022.84 BogoMIPS
Memory: 239828k/245696k available (1567k kernel code, 5172k reserved, 630k
data, 136k init, 0k highmem)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP 1800+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030813
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: Embedded Controller [EC0] (gpe 5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 11 14 15, disabled)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11 14 15)
ACPI: Power Resource [FN10] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f77f0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x681b, dseg 0xf0000
PnPBIOS: Unknown tag '0x82', length '22'.
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
pty: 256 Unix98 ptys configured
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Machine check exception polling timer started.
VFS: Disk quotas dquot_6.5.1
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Applying VIA southbridge workaround.
PCI: Via IRQ fixup for 0000:00:11.3, from 10 to 11
PCI: Via IRQ fixup for 0000:00:11.2, from 10 to 11
PCI: Via IRQ fixup for 0000:00:11.5, from 10 to 11
PCI: Via IRQ fixup for 0000:00:11.6, from 10 to 11
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
w83877f_wdt: WDT driver for W83877F initialised. timeout=30 sec (nowayout=0)
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled
˙ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: TOSHIBA MK3021GAS, ATA DISK drive
hdc: Samsung CD-RW/DVD-ROM SN-324B, ATAPI CD/DVD-ROM drive
Using anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB), CHS=58140/16/63
/dev/ide/host0/bus0/target0/lun0:<3>bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
p1 p2 p3
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
BIOS EDD facility v0.09 2003-Jan-22, 1 devices found
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 193k freed
VFS: Mounted root (romfs filesystem) readonly.
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
ide0: I/O resource 0x3F6-0x3F6 not free.
hda: ERROR, PORTS ALREADY IN USE
register_blkdev: cannot get major 3 for ide0
ide1: I/O resource 0x376-0x376 not free.
hdc: ERROR, PORTS ALREADY IN USE
register_blkdev: cannot get major 22 for ide1
Module via82cxxx cannot be unloaded due to unsafe usage in
include/linux/module.h:483
Journalled Block Device driver loaded
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
kjournald starting. Commit interval 5 seconds
bad: scheduling while atomic!
Call Trace:
[<c011ccd0>] schedule+0x3b0/0x3c0
[<cf82fffa>] kjournald+0x21a/0x240 [jbd]
[<c011e560>] autoremove_wake_function+0x0/0x50
[<c015798f>] sys_read+0x3f/0x60
[<c011e560>] autoremove_wake_function+0x0/0x50
[<c010b186>] ret_from_fork+0x6/0x14
[<cf82fde0>] kjournald+0x0/0x240 [jbd]
[<cf82fdc0>] commit_timeout+0x0/0x10 [jbd]
[<cf82fde0>] kjournald+0x0/0x240 [jbd]
[<c0109259>] kernel_thread_helper+0x5/0xc
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... <3>bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 136k freed
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
##########################################################################
2) single acpi=off
I have only few last lines of this
nuch of ,,scheduling while atomic'' and at end
Unable to handle kernel paging request at virtual address 08050298
printing eip:
0804a61a
*pde = 0edc6067
*pte = 0edb8065
Oops: 0007 [#1]
CPU: 0
EIP: 0073:[<0804a61a>] Not tainted
EFLAGS: 00010206
EIP is at 0x804a61a
eax: 08050298 ebx: 00000011 ecx: bffffb40 edx: 00000000
esi: bffffb40 edi: bffffac0 ebp: bffffce8 esp: bffffa10
ds: 007b es: 007b ss: 007b
Process init (pid: 1, threadinfo=cefa2000 task=cefa1880)
<0>Kernel panic: Attempted to kill init!
<0>MCE: The hardware reports a non fatal, correctable incident occurred on
CPU.Bank 0: 9e15400000004cd6
############################################################################
3) single acpi=off pci=noacpi
LILO 22.5.7.2 boot: pld pld-2.6.0 singlr e acpi=off pci=noacpi
Loading pld-2.6.0........................
BIOS data check successful
Linux version 2.6.0 (builder@beton) (gcc version 3.3.1 (PLD Linux)) #1 Sun Aug
24 21:24:47 UTC 2003
Video mode to be used for restore is f07
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
BIOS-e820: 000000000eff0000 - 000000000eff8000 (ACPI data)
BIOS-e820: 000000000eff8000 - 000000000f000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
239MB LOWMEM available.
On node 0 totalpages: 61424
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 57328 pages, LIFO batch:13
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=pld-2.6.0 ro root=303 console=ttyS0,57600n81
console=tty0 single acpi=off pci=noacpi
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1532.796 MHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 3022.84 BogoMIPS
Memory: 239828k/245696k available (1567k kernel code, 5172k reserved, 630k
data, 136k init, 0k highmem)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP 1800+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f77f0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x681b, dseg 0xf0000
PnPBIOS: Unknown tag '0x82', length '22'.
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/8231] at 0000:00:11.0
PCI: IRQ 0 for device 0000:00:08.0 doesn't match PIRQ mask - try
pci=usepirqmask
pty: 256 Unix98 ptys configured
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Machine check exception polling timer started.
VFS: Disk quotas dquot_6.5.1
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Applying VIA southbridge workaround.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
w83877f_wdt: WDT driver for W83877F initialised. timeout=30 sec (nowayout=0)
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled
˙ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: TOSHIBA MK3021GAS, ATA DISK drive
hdc: Samsung CD-RW/DVD-ROM SN-324B, ATAPI CD/DVD-ROM drive
Using anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB), CHS=58140/16/63
/dev/ide/host0/bus0/target0/lun0:<3>bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
p1 p2 p3
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
BIOS EDD facility v0.09 2003-Jan-22, 1 devices found
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 193k freed
VFS: Mounted root (romfs filesystem) readonly.
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
ide0: I/O resource 0x3F6-0x3F6 not free.
hda: ERROR, PORTS ALREADY IN USE
register_blkdev: cannot get major 3 for ide0
ide1: I/O resource 0x376-0x376 not free.
hdc: ERROR, PORTS ALREADY IN USE
register_blkdev: cannot get major 22 for ide1
Module via82cxxx cannot be unloaded due to unsafe usage in
include/linux/module.h:483
Journalled Block Device driver loaded
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
kjournald starting. Commit interval 5 seconds
bad: scheduling while atomic!
Call Trace:
[<c011ccd0>] schedule+0x3b0/0x3c0
[<cf826ffa>] kjournald+0x21a/0x240 [jbd]
[<c011e560>] autoremove_wake_function+0x0/0x50
[<c015798f>] sys_read+0x3f/0x60
[<c011e560>] autoremove_wake_function+0x0/0x50
[<c010b186>] ret_from_fork+0x6/0x14
[<cf826de0>] kjournald+0x0/0x240 [jbd]
[<cf826dc0>] commit_timeout+0x0/0x10 [jbd]
[<cf826de0>] kjournald+0x0/0x240 [jbd]
[<c0109259>] kernel_thread_helper+0x5/0xc
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... <3>bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 136k freed
bad: scheduling while atomic!
Call Trace:
[<c0105000>] _stext+0x0/0x60
[<c011ccd0>] schedule+0x3b0/0x3c0
[<c0105000>] _stext+0x0/0x60
[<c0105000>] _stext+0x0/0x60
[<c01090eb>] cpu_idle+0x3b/0x40
[<c0328734>] start_kernel+0x184/0x1b0
[<c0328480>] unknown_bootoption+0x0/0x100
--
Arkadiusz Miśkiewicz CS at FoE, Wroclaw University of Technology
arekm.pld-linux.org AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PLD/Linux
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2003-09-07 19:28 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-05 13:59 2.6.0test4 bk1 and Arkadiusz Miskiewicz
2003-09-05 15:54 ` Andrew Morton
2003-09-07 19:11 ` Arkadiusz Miskiewicz
2003-09-07 19:29 ` Bartlomiej Zolnierkiewicz
-- strict thread matches above, loose matches on Subject: below --
2003-08-25 13:35 Arkadiusz Miskiewicz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).