* [PATCH] s390 (2/7): Kconfig.
@ 2003-09-11 17:15 Martin Schwidefsky
0 siblings, 0 replies; only message in thread
From: Martin Schwidefsky @ 2003-09-11 17:15 UTC (permalink / raw)
To: torvalds, linux-kernel
- Use common drivers/block/Kconfig instead of own config options, move
s390 block device config options to drivers/s390/block/Kconfig and
include it from drivers/block/Kconfig.
- Fix configuration combination CONFIG_IPV6=m and CONFIG_QETH=y.
- New default configuration.
diffstat:
arch/s390/defconfig | 27 ++++---
drivers/block/Kconfig | 5 -
drivers/s390/Kconfig | 170 ---------------------------------------------
drivers/s390/block/Kconfig | 49 ++++++++++++
drivers/s390/net/Kconfig | 12 +--
5 files changed, 75 insertions(+), 188 deletions(-)
diff -urN linux-2.6/arch/s390/defconfig linux-2.6-s390/arch/s390/defconfig
--- linux-2.6/arch/s390/defconfig Mon Sep 8 21:50:22 2003
+++ linux-2.6-s390/arch/s390/defconfig Thu Sep 11 19:21:07 2003
@@ -10,6 +10,8 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
#
# General setup
@@ -19,10 +21,14 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
# CONFIG_KALLSYMS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
@@ -41,6 +47,7 @@
# Processor type and features
#
# CONFIG_ARCH_S390X is not set
+# CONFIG_64BIT is not set
CONFIG_ARCH_S390_31=y
CONFIG_MARCH_G5=y
# CONFIG_MARCH_Z900 is not set
@@ -63,7 +70,6 @@
CONFIG_IPL=y
# CONFIG_IPL_TAPE is not set
CONFIG_IPL_VM=y
-CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_PROCESS_DEBUG is not set
@@ -77,24 +83,26 @@
# CONFIG_FW_LOADER is not set
#
-# SCSI support
+# SCSI device support
#
# CONFIG_SCSI is not set
CONFIG_CCW=y
#
-# Block device drivers
+# Block devices
#
CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_BLK_DEV_XPRAM=m
+# CONFIG_LBD is not set
#
# S/390 block device drivers
#
+CONFIG_BLK_DEV_XPRAM=m
CONFIG_DASD=y
# CONFIG_DASD_PROFILE is not set
CONFIG_DASD_ECKD=y
@@ -154,7 +162,6 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -176,7 +183,9 @@
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_XFRM_USER is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -186,8 +195,6 @@
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
@@ -231,7 +238,6 @@
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -384,6 +390,7 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
#
@@ -407,6 +414,8 @@
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_TEST is not set
diff -urN linux-2.6/drivers/block/Kconfig linux-2.6-s390/drivers/block/Kconfig
--- linux-2.6/drivers/block/Kconfig Mon Sep 8 21:49:57 2003
+++ linux-2.6-s390/drivers/block/Kconfig Thu Sep 11 19:21:07 2003
@@ -6,7 +6,7 @@
config BLK_DEV_FD
tristate "Normal floppy disk support"
- depends on !X86_PC9800
+ depends on !X86_PC9800 && !ARCH_S390
---help---
If you want to use the floppy disk drive(s) of your PC under Linux,
say Y. Information about this driver, especially important for IBM
@@ -346,5 +346,6 @@
your machine, or if you want to have a raid or loopback device
bigger than 2TB. Otherwise say N.
-endmenu
+source "drivers/s390/block/Kconfig"
+endmenu
diff -urN linux-2.6/drivers/s390/Kconfig linux-2.6-s390/drivers/s390/Kconfig
--- linux-2.6/drivers/s390/Kconfig Mon Sep 8 21:50:22 2003
+++ linux-2.6-s390/drivers/s390/Kconfig Thu Sep 11 19:21:07 2003
@@ -2,175 +2,7 @@
bool
default y
-
-menu "Block device drivers"
-
-config BLK_DEV_LOOP
- tristate "Loopback device support"
- ---help---
- Saying Y here will allow you to use a regular file as a block
- device; you can then create a file system on that block device and
- mount it just as you would mount other block devices such as hard
- drive partitions, CD-ROM drives or floppy drives. The loop devices
- are block special device files with major number 7 and typically
- called /dev/loop0, /dev/loop1 etc.
-
- This is useful if you want to check an ISO 9660 file system before
- burning the CD, or if you want to use floppy images without first
- writing them to floppy. Furthermore, some Linux distributions avoid
- the need for a dedicated Linux partition by keeping their complete
- root file system inside a DOS FAT file using this loop device
- driver.
-
- The loop device driver can also be used to "hide" a file system in a
- disk partition, floppy, or regular file, either using encryption
- (scrambling the data) or steganography (hiding the data in the low
- bits of, say, a sound file). This is also safe if the file resides
- on a remote file server. If you want to do this, you will first have
- to acquire and install a kernel patch from
- <ftp://ftp.kerneli.org/pub/kerneli/>, and then you need to
- say Y to this option.
-
- Note that alternative ways to use encrypted file systems are
- provided by the cfs package, which can be gotten from
- <ftp://ftp.kerneli.org/pub/kerneli/net-source/>, and the newer tcfs
- package, available at <http://tcfs.dia.unisa.it/>. You do not need
- to say Y here if you want to use one of these. However, using cfs
- requires saying Y to "NFS file system support" below while using
- tcfs requires applying a kernel patch. An alternative steganography
- solution is provided by StegFS, also available from
- <ftp://ftp.kerneli.org/pub/kerneli/net-source/>.
-
- To use the loop device, you need the losetup utility and a recent
- version of the mount program, both contained in the util-linux
- package. The location and current version number of util-linux is
- contained in the file <file:Documentation/Changes>.
-
- Note that this loop device has nothing to do with the loopback
- device used for network connections from the machine to itself.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called loop.
-
- Most users will answer N here.
-
-config BLK_DEV_NBD
- tristate "Network block device support"
- depends on NET
- ---help---
- Saying Y here will allow your computer to be a client for network
- block devices, i.e. it will be able to use block devices exported by
- servers (mount file systems on them etc.). Communication between
- client and server works over TCP/IP networking, but to the client
- program this is hidden: it looks like a regular local file access to
- a block device special file such as /dev/nd0.
-
- Network block devices also allows you to run a block-device in
- userland (making server and client physically the same computer,
- communicating using the loopback network device).
-
- Read <file:Documentation/nbd.txt> for more information, especially
- about where to find the server code, which runs in user space and
- does not need special kernel support.
-
- Note that this has nothing to do with the network file systems NFS
- or Coda; you can say N here even if you intend to use NFS or Coda.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called nbd.
-
- If unsure, say N.
-
-config BLK_DEV_RAM
- tristate "RAM disk support"
- ---help---
- Saying Y here will allow you to use a portion of your RAM memory as
- a block device, so that you can make file systems on it, read and
- write to it and do all the other things that you can do with normal
- block devices (such as hard drives). It is usually used to load and
- store a copy of a minimal root file system off of a floppy into RAM
- during the initial install of Linux.
-
- Note that the kernel command line option "ramdisk=XX" is now
- obsolete. For details, read <file:Documentation/ramdisk.txt>.
-
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M and read <file:Documentation/modules.txt>. The module will be
- called rd.
-
- Most normal users won't need the RAM disk functionality, and can
- thus say N here.
-
-config BLK_DEV_RAM_SIZE
- int "Default RAM disk size"
- depends on BLK_DEV_RAM
- default "24576"
- help
- The default value is 4096. Only change this if you know what are
- you doing. If you are using IBM S/390, then set this to 8192.
-
-config BLK_DEV_INITRD
- bool "Initial RAM disk (initrd) support"
- depends on BLK_DEV_RAM=y
- help
- The initial RAM disk is a RAM disk that is loaded by the boot loader
- (loadlin or lilo) and that is mounted as root before the normal boot
- procedure. It is typically used to load modules needed to mount the
- "real" root file system, etc. See <file:Documentation/initrd.txt>
- for details.
-
-config BLK_DEV_XPRAM
- tristate "XPRAM disk support"
- help
- Select this option if you want to use your expanded storage on S/390
- or zSeries as a disk. This is useful as a _fast_ swap device if you
- want to access more than 2G of memory when running in 31 bit mode.
- This option is also available as a module which will be called
- xpram. If unsure, say "N".
-
-comment "S/390 block device drivers"
-
-config DASD
- tristate "Support for DASD devices"
- help
- Enable this option if you want to access DASDs directly utilizing
- S/390s channel subsystem commands. This is necessary for running
- natively on a single image or an LPAR.
-
-config DASD_PROFILE
- bool "Profiling support for dasd devices"
- help
- Enable this option if you want to see profiling information
- in /proc/dasd/statistics.
-
-config DASD_ECKD
- tristate "Support for ECKD Disks"
- depends on DASD
- help
- ECKD devices are the most commonly used devices. You should enable
- this option unless you are very sure to have no ECKD device.
-
-config DASD_FBA
- tristate "Support for FBA Disks"
- depends on DASD
- help
- Select this option to be able to access FBA devices. It is safe to
- say "Y".
-
-config DASD_DIAG
- tristate "Support for DIAG access to CMS reserved Disks"
- depends on DASD && ARCH_S390X = 'n'
- help
- Select this option if you want to use CMS reserved Disks under VM
- with the Diagnose250 command. If you are not running under VM or
- unsure what it is, say "N".
-
-endmenu
+source "drivers/block/Kconfig"
source "drivers/md/Kconfig"
diff -urN linux-2.6/drivers/s390/block/Kconfig linux-2.6-s390/drivers/s390/block/Kconfig
--- linux-2.6/drivers/s390/block/Kconfig Thu Jan 1 01:00:00 1970
+++ linux-2.6-s390/drivers/s390/block/Kconfig Thu Sep 11 19:21:07 2003
@@ -0,0 +1,49 @@
+comment "S/390 block device drivers"
+ depends on ARCH_S390
+
+config BLK_DEV_XPRAM
+ tristate "XPRAM disk support"
+ depends on ARCH_S390
+ help
+ Select this option if you want to use your expanded storage on S/390
+ or zSeries as a disk. This is useful as a _fast_ swap device if you
+ want to access more than 2G of memory when running in 31 bit mode.
+ This option is also available as a module which will be called
+ xpram. If unsure, say "N".
+
+config DASD
+ tristate "Support for DASD devices"
+ depends on CCW
+ help
+ Enable this option if you want to access DASDs directly utilizing
+ S/390s channel subsystem commands. This is necessary for running
+ natively on a single image or an LPAR.
+
+config DASD_PROFILE
+ bool "Profiling support for dasd devices"
+ depends on DASD
+ help
+ Enable this option if you want to see profiling information
+ in /proc/dasd/statistics.
+
+config DASD_ECKD
+ tristate "Support for ECKD Disks"
+ depends on DASD
+ help
+ ECKD devices are the most commonly used devices. You should enable
+ this option unless you are very sure to have no ECKD device.
+
+config DASD_FBA
+ tristate "Support for FBA Disks"
+ depends on DASD
+ help
+ Select this option to be able to access FBA devices. It is safe to
+ say "Y".
+
+config DASD_DIAG
+ tristate "Support for DIAG access to CMS reserved Disks"
+ depends on DASD && ARCH_S390X = 'n'
+ help
+ Select this option if you want to use CMS reserved Disks under VM
+ with the Diagnose250 command. If you are not running under VM or
+ unsure what it is, say "N".
diff -urN linux-2.6/drivers/s390/net/Kconfig linux-2.6-s390/drivers/s390/net/Kconfig
--- linux-2.6/drivers/s390/net/Kconfig Mon Sep 8 21:50:23 2003
+++ linux-2.6-s390/drivers/s390/net/Kconfig Thu Sep 11 19:21:07 2003
@@ -51,18 +51,16 @@
comment "Gigabit Ethernet default settings"
depends on QETH
-# FIXME IPV6=m && QETH=y
config QETH_IPV6
bool "IPv6 support for gigabit ethernet"
- depends on QETH && IPV6
+ depends on (QETH = IPV6) || (QETH && IPV6 = 'y')
help
If CONFIG_QETH is switched on, this option will include IPv6
support in the qeth device driver.
-
-# FIXME VLAN_8021Q=m && QETH=y
+
config QETH_VLAN
bool "VLAN support for gigabit ethernet"
- depends on QETH && VLAN_8021Q
+ depends on (QETH = VLAN_8021Q) || (QETH && VLAN_8021Q = 'y')
help
If CONFIG_QETH is switched on, this option will include IEEE
802.1q VLAN support in the qeth device driver.
@@ -78,8 +76,6 @@
config CCWGROUP
tristate
- depends on LCS || CTC || QETH
- default m if LCS!=y && CTC!=y && QETH!=y
- default y if LCS=y || CTC=y || QETH=y
+ default (LCS || CTC || QETH)
endmenu
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-09-11 17:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-11 17:15 [PATCH] s390 (2/7): Kconfig Martin Schwidefsky
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).