* [OOPS] Linux-2.6.0-test5-bk
@ 2003-09-10 22:16 Ranjeet Shetye
2003-09-10 22:46 ` Andrew Morton
2003-09-10 23:25 ` Greg KH
0 siblings, 2 replies; 12+ messages in thread
From: Ranjeet Shetye @ 2003-09-10 22:16 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 876 bytes --]
file: oops4.ksyms.txt: the OOPS that I got.
file: oops4.bt.txt: ksymoops-derived backtrace of OOPS.
file: .config - my .config file.
To verify that this is not a compilation problem, I ran a 'make
mrproper' and compiled from scratch.
Something to note: module support is disabled and I remember that
sometime back you needed to have ALSA compiled as a module, and this
OOPS is in ALSA. Is it still necessary to compile ALSA as a module ?
I am not on the kernel mailing list, (only on linux-net and netdev). So
please email me personally if you need any other information.
thanks,
--
Ranjeet Shetye
Senior Software Engineer
Zultys Technologies
Ranjeet dot Shetye2 at Zultys dot com
http://www.zultys.com/
The views, opinions, and judgements expressed in this message are solely
those of the author. The message contents have not been reviewed or
approved by Zultys.
[-- Attachment #2: oops4.ksyms.txt --]
[-- Type: text/plain, Size: 1510 bytes --]
MTVAP port 0x378 is busy
specify port
Unable to handle kernel paging request at virtual address ffffffef
printing eip:
c027184c
*pde = 00001067
*pte = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c027184c>] Not tainted
EFLAGS: 00010282
EIP is at atomic_dec_and_lock+0x8/0x54
eax: ffffffef ebx: ffffffef ecx: ffffffef edx: cf372254
esi: ffffffef edi: cf743e20 ebp: c12efea8 esp: c12efea0
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=c12ee000 task=c12ed8c0)
Stack: ffffffef ffffffef c12efec4 c01675e4 ffffffef c05a21b0 ffffffef cf7469b4
cf743e20 c12efee4 c018aa52 ffffffef 000041ed c018a998 c05f0f80 00000000
c05f0f80 c12eff00 c018aab1 c05f0f80 cf743e20 c05f0f84 00000000 c05f0f80
Call Trace:
[<c01675e4>] dput+0x24/0x227
[<c018aa52>] create_dir+0x9e/0xa4
[<c018a998>] init_dir+0x0/0x1c
[<c018aab1>] sysfs_create_dir+0x36/0x6c
[<c026eee0>] create_dir+0x1f/0x49
[<c026f331>] kobject_add+0x4d/0x124
[<c026f42b>] kobject_register+0x23/0x59
[<c02f7fff>] bus_add_driver+0x4c/0xaf
[<c02f844f>] driver_register+0x31/0x35
[<c027c3bb>] pci_populate_driver_dir+0x29/0x2b
[<c027c48d>] pci_register_driver+0x5e/0x83
[<c06a145f>] alsa_card_ens137x_init+0x15/0x41
[<c068475a>] do_initcalls+0x2a/0x97
[<c012e920>] init_workqueues+0x12/0x2a
[<c01050a3>] init+0x39/0x196
[<c010506a>] init+0x0/0x196
[<c0108f31>] kernel_thread_helper+0x5/0xb
Code: 8b 31 89 f2 83 ea 01 74 12 89 f0 f0 0f b1 11 31 db 39 f0 75
<0>Kernel panic: Attempted to kill init!
[-- Attachment #3: oops4.bt.txt --]
[-- Type: text/plain, Size: 3993 bytes --]
Getting OOPS bt for /usr/src/linux
^[[00mlrwxrwxrwx 1 root root 23 Aug 28 14:16 ^[[01;36m/usr/src/linux^[[00m -> ^[[01;34m/root/kernels/linux-2.5^[[00m/
^[[mksymoops 2.4.9 on i686 2.6.0-test3. Options used
-v /usr/src/linux/vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.0-test3/ (default)
-m /usr/src/linux/System.map (specified)
Error (regular_file): read_ksyms stat /proc/ksyms failed
ksymoops: No such file or directory
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel paging request at virtual address ffffffef
c027184c
*pde = 00001067
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c027184c>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: ffffffef ebx: ffffffef ecx: ffffffef edx: cf372254
esi: ffffffef edi: cf743e20 ebp: c12efea8 esp: c12efea0
ds: 007b es: 007b ss: 0068
Stack: ffffffef ffffffef c12efec4 c01675e4 ffffffef c05a21b0 ffffffef cf7469b4
cf743e20 c12efee4 c018aa52 ffffffef 000041ed c018a998 c05f0f80 00000000
c05f0f80 c12eff00 c018aab1 c05f0f80 cf743e20 c05f0f84 00000000 c05f0f80
Call Trace:
[<c01675e4>] dput+0x24/0x227
[<c018aa52>] create_dir+0x9e/0xa4
[<c018a998>] init_dir+0x0/0x1c
[<c018aab1>] sysfs_create_dir+0x36/0x6c
[<c026eee0>] create_dir+0x1f/0x49
[<c026f331>] kobject_add+0x4d/0x124
[<c026f42b>] kobject_register+0x23/0x59
[<c02f7fff>] bus_add_driver+0x4c/0xaf
[<c02f844f>] driver_register+0x31/0x35
[<c027c3bb>] pci_populate_driver_dir+0x29/0x2b
[<c027c48d>] pci_register_driver+0x5e/0x83
[<c06a145f>] alsa_card_ens137x_init+0x15/0x41
[<c068475a>] do_initcalls+0x2a/0x97
[<c012e920>] init_workqueues+0x12/0x2a
[<c01050a3>] init+0x39/0x196
[<c010506a>] init+0x0/0x196
[<c0108f31>] kernel_thread_helper+0x5/0xb
Code: 8b 31 89 f2 83 ea 01 74 12 89 f0 f0 0f b1 11 31 db 39 f0 75
>>EIP; c027184c <atomic_dec_and_lock+8/54> <=====
>>eax; ffffffef <TSS_ESP0_OFFSET+1eb/????>
>>ebx; ffffffef <TSS_ESP0_OFFSET+1eb/????>
>>ecx; ffffffef <TSS_ESP0_OFFSET+1eb/????>
>>edx; cf372254 <_end+ec720cc/3f8fde78>
>>esi; ffffffef <TSS_ESP0_OFFSET+1eb/????>
>>edi; cf743e20 <_end+f043c98/3f8fde78>
>>ebp; c12efea8 <_end+befd20/3f8fde78>
>>esp; c12efea0 <_end+befd18/3f8fde78>
Trace; c01675e4 <dput+24/227>
Trace; c018aa52 <create_dir+9e/a4>
Trace; c018a998 <init_dir+0/1c>
Trace; c018aab1 <sysfs_create_dir+36/6c>
Trace; c026eee0 <create_dir+1f/49>
Trace; c026f331 <kobject_add+4d/124>
Trace; c026f42b <kobject_register+23/59>
Trace; c02f7fff <bus_add_driver+4c/af>
Trace; c02f844f <driver_register+31/35>
Trace; c027c3bb <pci_populate_driver_dir+29/2b>
Trace; c027c48d <pci_register_driver+5e/83>
Trace; c06a145f <alsa_card_ens137x_init+15/41>
Trace; c068475a <do_initcalls+2a/97>
Trace; c012e920 <init_workqueues+12/2a>
Trace; c01050a3 <init+39/196>
Trace; c010506a <init+0/196>
Trace; c0108f31 <kernel_thread_helper+5/b>
Code; c027184c <atomic_dec_and_lock+8/54>
00000000 <_EIP>:
Code; c027184c <atomic_dec_and_lock+8/54> <=====
0: 8b 31 mov (%ecx),%esi <=====
Code; c027184e <atomic_dec_and_lock+a/54>
2: 89 f2 mov %esi,%edx
Code; c0271850 <atomic_dec_and_lock+c/54>
4: 83 ea 01 sub $0x1,%edx
Code; c0271853 <atomic_dec_and_lock+f/54>
7: 74 12 je 1b <_EIP+0x1b>
Code; c0271855 <atomic_dec_and_lock+11/54>
9: 89 f0 mov %esi,%eax
Code; c0271857 <atomic_dec_and_lock+13/54>
b: f0 0f b1 11 lock cmpxchg %edx,(%ecx)
Code; c027185b <atomic_dec_and_lock+17/54>
f: 31 db xor %ebx,%ebx
Code; c027185d <atomic_dec_and_lock+19/54>
11: 39 f0 cmp %esi,%eax
Code; c027185f <atomic_dec_and_lock+1b/54>
13: 75 00 jne 15 <_EIP+0x15>
<0>Kernel panic: Attempted to kill init!
1 error issued. Results may not be reliable.
[-- Attachment #4: .config --]
[-- Type: text/plain, Size: 27364 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI_HT=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_YENTA is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
# CONFIG_IP_NF_IRC is not set
CONFIG_IP_NF_TFTP=y
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=y
CONFIG_IP_NF_NAT_FTP=y
CONFIG_IP_NF_NAT_TFTP=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_LIMIT=y
CONFIG_IP6_NF_MATCH_MAC=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_MULTIPORT=y
CONFIG_IP6_NF_MATCH_OWNER=y
CONFIG_IP6_NF_MATCH_MARK=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_AHESP=y
CONFIG_IP6_NF_MATCH_LENGTH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_FILTER=y
# CONFIG_IP6_NF_TARGET_LOG is not set
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_TARGET_MARK=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_VLAN_8021Q=y
# CONFIG_LLC is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_CSZ is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_QOS is not set
# CONFIG_NET_CLS is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_ALI=y
# CONFIG_AGP_ATI is not set
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_ALI5451=y
CONFIG_SND_AZT3328=y
CONFIG_SND_CS46XX=y
# CONFIG_SND_CS46XX_NEW_DSP is not set
CONFIG_SND_CS4281=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_KORG1212=y
CONFIG_SND_NM256=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_HDSP=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_YMFPCI=y
CONFIG_SND_ALS4000=y
CONFIG_SND_CMIPCI=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_MAESTRO3=y
CONFIG_SND_FM801=y
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_SONICVIBES=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VX222=y
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_AX8817X_STANDALONE is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_IOVIRT=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_MLS is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-10 22:16 [OOPS] Linux-2.6.0-test5-bk Ranjeet Shetye
@ 2003-09-10 22:46 ` Andrew Morton
2003-09-11 0:19 ` Ranjeet Shetye
2003-09-10 23:25 ` Greg KH
1 sibling, 1 reply; 12+ messages in thread
From: Andrew Morton @ 2003-09-10 22:46 UTC (permalink / raw)
To: Ranjeet Shetye; +Cc: linux-kernel, Patrick Mochel, Greg KH
Ranjeet Shetye <ranjeet.shetye2@zultys.com> wrote:
>
> Unable to handle kernel paging request at virtual address ffffffef
> printing eip:
> c027184c
> *pde = 00001067
> *pte = 00000000
> Oops: 0000 [#1]
> CPU: 0
> EIP: 0060:[<c027184c>] Not tainted
> EFLAGS: 00010282
> EIP is at atomic_dec_and_lock+0x8/0x54
> eax: ffffffef ebx: ffffffef ecx: ffffffef edx: cf372254
> esi: ffffffef edi: cf743e20 ebp: c12efea8 esp: c12efea0
> ds: 007b es: 007b ss: 0068
> Process swapper (pid: 1, threadinfo=c12ee000 task=c12ed8c0)
> Stack: ffffffef ffffffef c12efec4 c01675e4 ffffffef c05a21b0 ffffffef cf7469b4
> cf743e20 c12efee4 c018aa52 ffffffef 000041ed c018a998 c05f0f80 00000000
> c05f0f80 c12eff00 c018aab1 c05f0f80 cf743e20 c05f0f84 00000000 c05f0f80
> Call Trace:
> [<c01675e4>] dput+0x24/0x227
> [<c018aa52>] create_dir+0x9e/0xa4
> [<c018a998>] init_dir+0x0/0x1c
> [<c018aab1>] sysfs_create_dir+0x36/0x6c
> [<c026eee0>] create_dir+0x1f/0x49
> [<c026f331>] kobject_add+0x4d/0x124
Bug in fs/sysfs/dir.c:create_dir() - sysfs_create() returned -EEXIST and we
turned that into a pointer and did a dput() on it.
Something like this should fix it. The -EEXIST return may be another bug?
diff -puN fs/sysfs/dir.c~sysfs-create_dir-oops-fix fs/sysfs/dir.c
--- 25/fs/sysfs/dir.c~sysfs-create_dir-oops-fix Wed Sep 10 15:41:35 2003
+++ 25-akpm/fs/sysfs/dir.c Wed Sep 10 15:44:42 2003
@@ -24,10 +24,11 @@ static int init_dir(struct inode * inode
static struct dentry *
create_dir(struct kobject * k, struct dentry * p, const char * n)
{
- struct dentry * dentry;
+ struct dentry *dentry, *ret;
down(&p->d_inode->i_sem);
dentry = sysfs_get_dentry(p,n);
+ ret = dentry;
if (!IS_ERR(dentry)) {
int error = sysfs_create(dentry,
S_IFDIR| S_IRWXU | S_IRUGO | S_IXUGO,
@@ -36,11 +37,11 @@ create_dir(struct kobject * k, struct de
dentry->d_fsdata = k;
p->d_inode->i_nlink++;
} else
- dentry = ERR_PTR(error);
+ ret = ERR_PTR(error);
dput(dentry);
}
up(&p->d_inode->i_sem);
- return dentry;
+ return ret;
}
_
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-10 22:16 [OOPS] Linux-2.6.0-test5-bk Ranjeet Shetye
2003-09-10 22:46 ` Andrew Morton
@ 2003-09-10 23:25 ` Greg KH
2003-09-11 0:20 ` Ranjeet Shetye
1 sibling, 1 reply; 12+ messages in thread
From: Greg KH @ 2003-09-10 23:25 UTC (permalink / raw)
To: Ranjeet Shetye; +Cc: linux-kernel
On Wed, Sep 10, 2003 at 03:16:50PM -0700, Ranjeet Shetye wrote:
>
> file: oops4.ksyms.txt: the OOPS that I got.
> file: oops4.bt.txt: ksymoops-derived backtrace of OOPS.
> file: .config - my .config file.
>
> To verify that this is not a compilation problem, I ran a 'make
> mrproper' and compiled from scratch.
>
> Something to note: module support is disabled and I remember that
> sometime back you needed to have ALSA compiled as a module, and this
> OOPS is in ALSA. Is it still necessary to compile ALSA as a module ?
>
> I am not on the kernel mailing list, (only on linux-net and netdev). So
> please email me personally if you need any other information.
What were you doing that caused this oops?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-10 22:46 ` Andrew Morton
@ 2003-09-11 0:19 ` Ranjeet Shetye
2003-09-11 0:24 ` Greg KH
0 siblings, 1 reply; 12+ messages in thread
From: Ranjeet Shetye @ 2003-09-11 0:19 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Patrick Mochel, Greg KH
On Wed, 2003-09-10 at 15:46, Andrew Morton wrote:
> Ranjeet Shetye <ranjeet.shetye2@zultys.com> wrote:
> >
> > Unable to handle kernel paging request at virtual address ffffffef
> > printing eip:
> > c027184c
> > *pde = 00001067
> > *pte = 00000000
> > Oops: 0000 [#1]
> > CPU: 0
> > EIP: 0060:[<c027184c>] Not tainted
> > EFLAGS: 00010282
> > EIP is at atomic_dec_and_lock+0x8/0x54
> > eax: ffffffef ebx: ffffffef ecx: ffffffef edx: cf372254
> > esi: ffffffef edi: cf743e20 ebp: c12efea8 esp: c12efea0
> > ds: 007b es: 007b ss: 0068
> > Process swapper (pid: 1, threadinfo=c12ee000 task=c12ed8c0)
> > Stack: ffffffef ffffffef c12efec4 c01675e4 ffffffef c05a21b0 ffffffef cf7469b4
> > cf743e20 c12efee4 c018aa52 ffffffef 000041ed c018a998 c05f0f80 00000000
> > c05f0f80 c12eff00 c018aab1 c05f0f80 cf743e20 c05f0f84 00000000 c05f0f80
> > Call Trace:
> > [<c01675e4>] dput+0x24/0x227
> > [<c018aa52>] create_dir+0x9e/0xa4
> > [<c018a998>] init_dir+0x0/0x1c
> > [<c018aab1>] sysfs_create_dir+0x36/0x6c
> > [<c026eee0>] create_dir+0x1f/0x49
> > [<c026f331>] kobject_add+0x4d/0x124
>
> Bug in fs/sysfs/dir.c:create_dir() - sysfs_create() returned -EEXIST and we
> turned that into a pointer and did a dput() on it.
>
> Something like this should fix it. The -EEXIST return may be another bug?
>
>
>
> diff -puN fs/sysfs/dir.c~sysfs-create_dir-oops-fix fs/sysfs/dir.c
> --- 25/fs/sysfs/dir.c~sysfs-create_dir-oops-fix Wed Sep 10 15:41:35 2003
> +++ 25-akpm/fs/sysfs/dir.c Wed Sep 10 15:44:42 2003
> @@ -24,10 +24,11 @@ static int init_dir(struct inode * inode
> static struct dentry *
> create_dir(struct kobject * k, struct dentry * p, const char * n)
> {
> - struct dentry * dentry;
> + struct dentry *dentry, *ret;
>
> down(&p->d_inode->i_sem);
> dentry = sysfs_get_dentry(p,n);
> + ret = dentry;
> if (!IS_ERR(dentry)) {
> int error = sysfs_create(dentry,
> S_IFDIR| S_IRWXU | S_IRUGO | S_IXUGO,
> @@ -36,11 +37,11 @@ create_dir(struct kobject * k, struct de
> dentry->d_fsdata = k;
> p->d_inode->i_nlink++;
> } else
> - dentry = ERR_PTR(error);
> + ret = ERR_PTR(error);
> dput(dentry);
> }
> up(&p->d_inode->i_sem);
> - return dentry;
> + return ret;
> }
>
>
>
> _
Hi Andrew,
Your changes fixed the issue. Thanks a lot for your help. I still get
this call trace, but no more OOPS on bootup.
kobject_register failed for Ensoniq AudioPCI (-17)
Call Trace:
[<c026f45c>] kobject_register+0x50/0x59
[<c02f8003>] bus_add_driver+0x4c/0xaf
[<c02f8453>] driver_register+0x31/0x35
[<c027c3bf>] pci_populate_driver_dir+0x29/0x2b
[<c027c491>] pci_register_driver+0x5e/0x83
[<c06a145f>] alsa_card_ens137x_init+0x15/0x41
[<c068475a>] do_initcalls+0x2a/0x97
[<c012e920>] init_workqueues+0x12/0x2a
[<c01050a3>] init+0x39/0x196
[<c010506a>] init+0x0/0x196
[<c0108f31>] kernel_thread_helper+0x5/0xb
Also, I wanted to ask one more thing:
In the top level Makefile, I have replaced
EXTRAVERSION = -test5
with
TESTVERSION = -test5
BKVERSION = $(shell if [ -d "./BitKeeper" ]; then echo '-bk-`bk changes
| head -1 | cut -f 2 -d @ | cut -f 1 -d ,`' ; else echo ''; fi)
EXTRAVERSION = $(TESTVERSION)$(BKVERSION)
As a result 'uname -r' on a bk-based kernel now returns a more useful
'2.6.0-test5-bk-1.1227.1.49' instead of just '2.6.0-test5'. For non-bk
based source code trees, the version is still '2.6.0-test5'. This is
very useful to me because I have 2 seperate 2.6 trees (bk and vanilla),
and this lets me figure out where I got my kernel from and esp. at what
bk changeset it was built.
I am not very familiar with bk (still stumbling around) and hence I
couldn't generate a bk diff or do a bk send etc; if you think this
change is useful, please send it over to be included in the main tree.
thanks again,
Ranjeet.
--
Ranjeet Shetye
Senior Software Engineer
Zultys Technologies
Ranjeet dot Shetye2 at Zultys dot com
http://www.zultys.com/
The views, opinions, and judgements expressed in this message are solely
those of the author. The message contents have not been reviewed or
approved by Zultys.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-10 23:25 ` Greg KH
@ 2003-09-11 0:20 ` Ranjeet Shetye
0 siblings, 0 replies; 12+ messages in thread
From: Ranjeet Shetye @ 2003-09-11 0:20 UTC (permalink / raw)
To: Greg KH; +Cc: linux-kernel
On Wed, 2003-09-10 at 16:25, Greg KH wrote:
> On Wed, Sep 10, 2003 at 03:16:50PM -0700, Ranjeet Shetye wrote:
> >
> > file: oops4.ksyms.txt: the OOPS that I got.
> > file: oops4.bt.txt: ksymoops-derived backtrace of OOPS.
> > file: .config - my .config file.
> >
> > To verify that this is not a compilation problem, I ran a 'make
> > mrproper' and compiled from scratch.
> >
> > Something to note: module support is disabled and I remember that
> > sometime back you needed to have ALSA compiled as a module, and this
> > OOPS is in ALSA. Is it still necessary to compile ALSA as a module ?
> >
> > I am not on the kernel mailing list, (only on linux-net and netdev). So
> > please email me personally if you need any other information.
>
> What were you doing that caused this oops?
>
> thanks,
>
> greg k-h
Hi Greg,
The OOPS was happening at boot time. Andrew's fix has resolved the
issue.
thanks,
Ranjeet.
--
Ranjeet Shetye
Senior Software Engineer
Zultys Technologies
Ranjeet dot Shetye2 at Zultys dot com
http://www.zultys.com/
The views, opinions, and judgements expressed in this message are solely
those of the author. The message contents have not been reviewed or
approved by Zultys.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-11 0:19 ` Ranjeet Shetye
@ 2003-09-11 0:24 ` Greg KH
2003-09-11 0:36 ` Ranjeet Shetye
0 siblings, 1 reply; 12+ messages in thread
From: Greg KH @ 2003-09-11 0:24 UTC (permalink / raw)
To: Ranjeet Shetye; +Cc: Andrew Morton, linux-kernel, Patrick Mochel
On Wed, Sep 10, 2003 at 05:19:05PM -0700, Ranjeet Shetye wrote:
>
> Your changes fixed the issue. Thanks a lot for your help. I still get
> this call trace, but no more OOPS on bootup.
>
> kobject_register failed for Ensoniq AudioPCI (-17)
> Call Trace:
> [<c026f45c>] kobject_register+0x50/0x59
> [<c02f8003>] bus_add_driver+0x4c/0xaf
> [<c02f8453>] driver_register+0x31/0x35
> [<c027c3bf>] pci_populate_driver_dir+0x29/0x2b
> [<c027c491>] pci_register_driver+0x5e/0x83
> [<c06a145f>] alsa_card_ens137x_init+0x15/0x41
> [<c068475a>] do_initcalls+0x2a/0x97
> [<c012e920>] init_workqueues+0x12/0x2a
> [<c01050a3>] init+0x39/0x196
> [<c010506a>] init+0x0/0x196
> [<c0108f31>] kernel_thread_helper+0x5/0xb
Odds are that the pci driver is trying to register 2 drivers with the
pci core with the same name. What does /sys/bus/pci/drivers show?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-11 0:24 ` Greg KH
@ 2003-09-11 0:36 ` Ranjeet Shetye
2003-09-11 2:40 ` Greg KH
2003-09-13 19:55 ` Adam Belay
0 siblings, 2 replies; 12+ messages in thread
From: Ranjeet Shetye @ 2003-09-11 0:36 UTC (permalink / raw)
To: Greg KH; +Cc: Andrew Morton, linux-kernel, Patrick Mochel
On Wed, 2003-09-10 at 17:24, Greg KH wrote:
> On Wed, Sep 10, 2003 at 05:19:05PM -0700, Ranjeet Shetye wrote:
> >
> > Your changes fixed the issue. Thanks a lot for your help. I still get
> > this call trace, but no more OOPS on bootup.
> >
> > kobject_register failed for Ensoniq AudioPCI (-17)
> > Call Trace:
> > [<c026f45c>] kobject_register+0x50/0x59
> > [<c02f8003>] bus_add_driver+0x4c/0xaf
> > [<c02f8453>] driver_register+0x31/0x35
> > [<c027c3bf>] pci_populate_driver_dir+0x29/0x2b
> > [<c027c491>] pci_register_driver+0x5e/0x83
> > [<c06a145f>] alsa_card_ens137x_init+0x15/0x41
> > [<c068475a>] do_initcalls+0x2a/0x97
> > [<c012e920>] init_workqueues+0x12/0x2a
> > [<c01050a3>] init+0x39/0x196
> > [<c010506a>] init+0x0/0x196
> > [<c0108f31>] kernel_thread_helper+0x5/0xb
>
> Odds are that the pci driver is trying to register 2 drivers with the
> pci core with the same name. What does /sys/bus/pci/drivers show?
>
> thanks,
>
> greg k-h
Hi Greg,
I didn't find a /proc/sys/bus/pci/drivers, but I did find a
/proc/bus/pci/devices - which is what I am guessing you meant. If you
did in fact mean '/proc/sys/bus/pci/drivers' then I dont have any such
file. In fact I dont have a bus sub-directory under /proc/sys/
Anyways, here's the output:
cat /proc/bus/pci/devices
0000 80862560 0 f0000008 00000000
00000000 00000000 00000000 00000000
00000000 08000000 00000000 00000000
00000000 00000000 00000000 00000000
agpgart-intel
0010 80862562 10 e8000008 ff680000
00000000 00000000 00000000 00000000
00000000 08000000 00080000 00000000
00000000 00000000 00000000 00000000
00e8 808624c2 10 00000000 00000000
00000000 00000000 0000ff81 00000000
00000000 00000000 00000000 00000000
00000000 00000020 00000000 00000000 uhci-hcd
00e9 808624c4 13 00000000 00000000
00000000 00000000 0000ff61 00000000
00000000 00000000 00000000 00000000
00000000 00000020 00000000 00000000 uhci-hcd
00ea 808624c7 12 00000000 00000000
00000000 00000000 0000ff41 00000000
00000000 00000000 00000000 00000000
00000000 00000020 00000000 00000000 uhci-hcd
00ef 808624cd 17 ffa00800 00000000
00000000 00000000 00000000 00000000
00000000 00000400 00000000 00000000
00000000 00000000 00000000 00000000 ehci_hcd
00f0 8086244e 0 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00f8 808624c0 0 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00f9 808624cb 12 00000000 00000000
00000000 00000000 0000ffa1 10000000
00000000 00000000 00000000 00000000
00000000 00000010 00000400 00000000 PIIX IDE
00fb 808624c3 11 00000000 00000000
00000000 00000000 0000dc81 00000000
00000000 00000000 00000000 00000000
00000000 00000020 00000000 00000000
00fd 808624c5 11 0000d801 0000dc41
ffa00400 ffa00000 00000000 00000000
00000000 00000100 00000040 00000200
00000100 00000000 00000000 00000000 Intel
ICH
0138 16ae1141 10 f80fe008 00000000
00000000 00000000 00000000 00000000
00000000 00002000 00000000 00000000
00000000 00000000 00000000 00000000
0140 10ec8139 11 0000ec01 ff8ffc00
00000000 00000000 00000000 00000000
00000000 00000100 00000100 00000000
00000000 00000000 00000000 00000000 8139too
0160 8086100e 12 ff8c0000 00000000
0000e8c1 00000000 00000000 00000000
00000000 00020000 00000000 00000040
00000000 00000000 00000000 00000000 e1000
thanks,
--
Ranjeet Shetye
Senior Software Engineer
Zultys Technologies
Ranjeet dot Shetye2 at Zultys dot com
http://www.zultys.com/
The views, opinions, and judgements expressed in this message are solely
those of the author. The message contents have not been reviewed or
approved by Zultys.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-11 0:36 ` Ranjeet Shetye
@ 2003-09-11 2:40 ` Greg KH
2003-09-11 20:26 ` Ranjeet Shetye
2003-09-13 19:55 ` Adam Belay
1 sibling, 1 reply; 12+ messages in thread
From: Greg KH @ 2003-09-11 2:40 UTC (permalink / raw)
To: Ranjeet Shetye; +Cc: Andrew Morton, linux-kernel, Patrick Mochel
On Wed, Sep 10, 2003 at 05:36:51PM -0700, Ranjeet Shetye wrote:
> On Wed, 2003-09-10 at 17:24, Greg KH wrote:
> > On Wed, Sep 10, 2003 at 05:19:05PM -0700, Ranjeet Shetye wrote:
> > >
> > > Your changes fixed the issue. Thanks a lot for your help. I still get
> > > this call trace, but no more OOPS on bootup.
> > >
> > > kobject_register failed for Ensoniq AudioPCI (-17)
> > > Call Trace:
> > > [<c026f45c>] kobject_register+0x50/0x59
> > > [<c02f8003>] bus_add_driver+0x4c/0xaf
> > > [<c02f8453>] driver_register+0x31/0x35
> > > [<c027c3bf>] pci_populate_driver_dir+0x29/0x2b
> > > [<c027c491>] pci_register_driver+0x5e/0x83
> > > [<c06a145f>] alsa_card_ens137x_init+0x15/0x41
> > > [<c068475a>] do_initcalls+0x2a/0x97
> > > [<c012e920>] init_workqueues+0x12/0x2a
> > > [<c01050a3>] init+0x39/0x196
> > > [<c010506a>] init+0x0/0x196
> > > [<c0108f31>] kernel_thread_helper+0x5/0xb
> >
> > Odds are that the pci driver is trying to register 2 drivers with the
> > pci core with the same name. What does /sys/bus/pci/drivers show?
> >
> > thanks,
> >
> > greg k-h
>
> Hi Greg,
>
> I didn't find a /proc/sys/bus/pci/drivers, but I did find a
> /proc/bus/pci/devices - which is what I am guessing you meant. If you
> did in fact mean '/proc/sys/bus/pci/drivers' then I dont have any such
> file. In fact I dont have a bus sub-directory under /proc/sys/
No, look at what I asked for above, "/sys/bus/pci..." I don't care about
/proc at all :)
sysfs is mounted at /sys.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-11 2:40 ` Greg KH
@ 2003-09-11 20:26 ` Ranjeet Shetye
2003-09-11 20:28 ` Greg KH
0 siblings, 1 reply; 12+ messages in thread
From: Ranjeet Shetye @ 2003-09-11 20:26 UTC (permalink / raw)
To: Greg KH; +Cc: Andrew Morton, linux-kernel, Patrick Mochel
[-- Attachment #1: Type: text/plain, Size: 2474 bytes --]
On Wed, 2003-09-10 at 19:40, Greg KH wrote:
> On Wed, Sep 10, 2003 at 05:36:51PM -0700, Ranjeet Shetye wrote:
> > On Wed, 2003-09-10 at 17:24, Greg KH wrote:
> > > On Wed, Sep 10, 2003 at 05:19:05PM -0700, Ranjeet Shetye wrote:
> > > >
> > > > Your changes fixed the issue. Thanks a lot for your help. I still get
> > > > this call trace, but no more OOPS on bootup.
> > > >
> > > > kobject_register failed for Ensoniq AudioPCI (-17)
> > > > Call Trace:
> > > > [<c026f45c>] kobject_register+0x50/0x59
> > > > [<c02f8003>] bus_add_driver+0x4c/0xaf
> > > > [<c02f8453>] driver_register+0x31/0x35
> > > > [<c027c3bf>] pci_populate_driver_dir+0x29/0x2b
> > > > [<c027c491>] pci_register_driver+0x5e/0x83
> > > > [<c06a145f>] alsa_card_ens137x_init+0x15/0x41
> > > > [<c068475a>] do_initcalls+0x2a/0x97
> > > > [<c012e920>] init_workqueues+0x12/0x2a
> > > > [<c01050a3>] init+0x39/0x196
> > > > [<c010506a>] init+0x0/0x196
> > > > [<c0108f31>] kernel_thread_helper+0x5/0xb
> > >
> > > Odds are that the pci driver is trying to register 2 drivers with the
> > > pci core with the same name. What does /sys/bus/pci/drivers show?
> > >
> > > thanks,
> > >
> > > greg k-h
> >
> > Hi Greg,
> >
> > I didn't find a /proc/sys/bus/pci/drivers, but I did find a
> > /proc/bus/pci/devices - which is what I am guessing you meant. If you
> > did in fact mean '/proc/sys/bus/pci/drivers' then I dont have any such
> > file. In fact I dont have a bus sub-directory under /proc/sys/
>
> No, look at what I asked for above, "/sys/bus/pci..." I don't care about
> /proc at all :)
>
> sysfs is mounted at /sys.
>
> thanks,
>
> greg k-h
hi,
Actually I don't know what part I am missing, but I dont have a /sys
directory at all. That's why I assumed you might be referring to
/proc/sys. I've attached my .config. Is there some option I need to turn
on ? I looked and couldn't find it. (The fs/Makefile has a obj-y for
sysfs and there is no CONFIG_ parameter in any file in fs/sysfs). I dont
have a top level /sys directory. Is that the problem ? How do i get my
sysfs running ?
I am running Gentoo Linux 1.4 on x86 with kernel
2.6.0-test5-bk-1.1227.1.49 and gcc 3.2.3.
thanks,
--
Ranjeet Shetye
Senior Software Engineer
Zultys Technologies
Ranjeet dot Shetye2 at Zultys dot com
http://www.zultys.com/
The views, opinions, and judgements expressed in this message are solely
those of the author. The message contents have not been reviewed or
approved by Zultys.
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 27364 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI_HT=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_YENTA is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
# CONFIG_IP_NF_IRC is not set
CONFIG_IP_NF_TFTP=y
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=y
CONFIG_IP_NF_NAT_FTP=y
CONFIG_IP_NF_NAT_TFTP=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_LIMIT=y
CONFIG_IP6_NF_MATCH_MAC=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_MULTIPORT=y
CONFIG_IP6_NF_MATCH_OWNER=y
CONFIG_IP6_NF_MATCH_MARK=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_AHESP=y
CONFIG_IP6_NF_MATCH_LENGTH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_FILTER=y
# CONFIG_IP6_NF_TARGET_LOG is not set
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_TARGET_MARK=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_VLAN_8021Q=y
# CONFIG_LLC is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_CSZ is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_QOS is not set
# CONFIG_NET_CLS is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_ALI=y
# CONFIG_AGP_ATI is not set
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_ALI5451=y
CONFIG_SND_AZT3328=y
CONFIG_SND_CS46XX=y
# CONFIG_SND_CS46XX_NEW_DSP is not set
CONFIG_SND_CS4281=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_KORG1212=y
CONFIG_SND_NM256=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_HDSP=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_YMFPCI=y
CONFIG_SND_ALS4000=y
CONFIG_SND_CMIPCI=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_MAESTRO3=y
CONFIG_SND_FM801=y
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_SONICVIBES=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VX222=y
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_AX8817X_STANDALONE is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_IOVIRT=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_MLS is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-11 20:26 ` Ranjeet Shetye
@ 2003-09-11 20:28 ` Greg KH
2003-09-11 20:43 ` Ranjeet Shetye
0 siblings, 1 reply; 12+ messages in thread
From: Greg KH @ 2003-09-11 20:28 UTC (permalink / raw)
To: Ranjeet Shetye; +Cc: linux-kernel
On Thu, Sep 11, 2003 at 01:26:26PM -0700, Ranjeet Shetye wrote:
> On Wed, 2003-09-10 at 19:40, Greg KH wrote:
> > On Wed, Sep 10, 2003 at 05:36:51PM -0700, Ranjeet Shetye wrote:
> > > On Wed, 2003-09-10 at 17:24, Greg KH wrote:
> > > > On Wed, Sep 10, 2003 at 05:19:05PM -0700, Ranjeet Shetye wrote:
> > > > >
> > > > > Your changes fixed the issue. Thanks a lot for your help. I still get
> > > > > this call trace, but no more OOPS on bootup.
> > > > >
> > > > > kobject_register failed for Ensoniq AudioPCI (-17)
> > > > > Call Trace:
> > > > > [<c026f45c>] kobject_register+0x50/0x59
> > > > > [<c02f8003>] bus_add_driver+0x4c/0xaf
> > > > > [<c02f8453>] driver_register+0x31/0x35
> > > > > [<c027c3bf>] pci_populate_driver_dir+0x29/0x2b
> > > > > [<c027c491>] pci_register_driver+0x5e/0x83
> > > > > [<c06a145f>] alsa_card_ens137x_init+0x15/0x41
> > > > > [<c068475a>] do_initcalls+0x2a/0x97
> > > > > [<c012e920>] init_workqueues+0x12/0x2a
> > > > > [<c01050a3>] init+0x39/0x196
> > > > > [<c010506a>] init+0x0/0x196
> > > > > [<c0108f31>] kernel_thread_helper+0x5/0xb
> > > >
> > > > Odds are that the pci driver is trying to register 2 drivers with the
> > > > pci core with the same name. What does /sys/bus/pci/drivers show?
> > >
> > > I didn't find a /proc/sys/bus/pci/drivers, but I did find a
> > > /proc/bus/pci/devices - which is what I am guessing you meant. If you
> > > did in fact mean '/proc/sys/bus/pci/drivers' then I dont have any such
> > > file. In fact I dont have a bus sub-directory under /proc/sys/
> >
> > No, look at what I asked for above, "/sys/bus/pci..." I don't care about
> > /proc at all :)
> >
> > sysfs is mounted at /sys.
>
> Actually I don't know what part I am missing, but I dont have a /sys
> directory at all. That's why I assumed you might be referring to
> /proc/sys. I've attached my .config. Is there some option I need to turn
> on ? I looked and couldn't find it. (The fs/Makefile has a obj-y for
> sysfs and there is no CONFIG_ parameter in any file in fs/sysfs). I dont
> have a top level /sys directory. Is that the problem ? How do i get my
> sysfs running ?
mkdir /sys
mount -t sysfs none /sys
thanks,
greg k-h
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-11 20:28 ` Greg KH
@ 2003-09-11 20:43 ` Ranjeet Shetye
0 siblings, 0 replies; 12+ messages in thread
From: Ranjeet Shetye @ 2003-09-11 20:43 UTC (permalink / raw)
To: Greg KH; +Cc: linux-kernel
On Thu, 2003-09-11 at 13:28, Greg KH wrote:
> On Thu, Sep 11, 2003 at 01:26:26PM -0700, Ranjeet Shetye wrote:
> > On Wed, 2003-09-10 at 19:40, Greg KH wrote:
> > > On Wed, Sep 10, 2003 at 05:36:51PM -0700, Ranjeet Shetye wrote:
> > > > On Wed, 2003-09-10 at 17:24, Greg KH wrote:
> > > > > On Wed, Sep 10, 2003 at 05:19:05PM -0700, Ranjeet Shetye wrote:
> > > > > >
> > > > > > Your changes fixed the issue. Thanks a lot for your help. I still get
> > > > > > this call trace, but no more OOPS on bootup.
> > > > > >
> > > > > > kobject_register failed for Ensoniq AudioPCI (-17)
> > > > > > Call Trace:
> > > > > > [<c026f45c>] kobject_register+0x50/0x59
> > > > > > [<c02f8003>] bus_add_driver+0x4c/0xaf
> > > > > > [<c02f8453>] driver_register+0x31/0x35
> > > > > > [<c027c3bf>] pci_populate_driver_dir+0x29/0x2b
> > > > > > [<c027c491>] pci_register_driver+0x5e/0x83
> > > > > > [<c06a145f>] alsa_card_ens137x_init+0x15/0x41
> > > > > > [<c068475a>] do_initcalls+0x2a/0x97
> > > > > > [<c012e920>] init_workqueues+0x12/0x2a
> > > > > > [<c01050a3>] init+0x39/0x196
> > > > > > [<c010506a>] init+0x0/0x196
> > > > > > [<c0108f31>] kernel_thread_helper+0x5/0xb
> > > > >
> > > > > Odds are that the pci driver is trying to register 2 drivers with the
> > > > > pci core with the same name. What does /sys/bus/pci/drivers show?
> > > >
> > > > I didn't find a /proc/sys/bus/pci/drivers, but I did find a
> > > > /proc/bus/pci/devices - which is what I am guessing you meant. If you
> > > > did in fact mean '/proc/sys/bus/pci/drivers' then I dont have any such
> > > > file. In fact I dont have a bus sub-directory under /proc/sys/
> > >
> > > No, look at what I asked for above, "/sys/bus/pci..." I don't care about
> > > /proc at all :)
> > >
> > > sysfs is mounted at /sys.
> >
> > Actually I don't know what part I am missing, but I dont have a /sys
> > directory at all. That's why I assumed you might be referring to
> > /proc/sys. I've attached my .config. Is there some option I need to turn
> > on ? I looked and couldn't find it. (The fs/Makefile has a obj-y for
> > sysfs and there is no CONFIG_ parameter in any file in fs/sysfs). I dont
> > have a top level /sys directory. Is that the problem ? How do i get my
> > sysfs running ?
>
> mkdir /sys
> mount -t sysfs none /sys
>
> thanks,
>
> greg k-h
he, he. thanks for that. Didn't know what I was missing. Will drop a
line to Gentoo folks to update their x86 installation guide with this
gem.
Here's the listing from "/sys/bus/pci/drivers"
OUTPUT of "/bin/ls -c1 /sys/bus/pci/drivers"
ALI 5451
AZF3328
Digigram VX222
EMU10K1_Audigy
ES1968 (ESS Maestro
ESS ES1938 (Solo-1)
FM801
ICE1712
ICE1724
Intel ICH
Intel ICH Joystick
Maestro3
NeoMagic 256
RME Digi32
RME Digi96
RME Digi9652 (Hammerfall
RME Hammerfall DSP
S3 SonicVibes
Sound Fusion CS46xx
Trident4DWaveAudio
VIA 82xx Audio
Yamaha DS-XG PCI
korg1212
ALS4000
C-Media PCI
CS4281
Ensoniq AudioPCI
ehci_hcd
uhci-hcd
PCI IDE
PIIX IDE
RZ1000 IDE
8139too
e100
e1000
agpgart-ali
agpgart-amdk7
agpgart-intel
agpgart-serverworks
agpgart-sis
agpgart-via
parport_pc
serial
OUTPUT of "find /sys/bus/pci/drivers"
/sys/bus/pci/drivers
/sys/bus/pci/drivers/Digigram VX222
/sys/bus/pci/drivers/Digigram VX222/new_id
/sys/bus/pci/drivers/ICE1724
/sys/bus/pci/drivers/ICE1724/new_id
/sys/bus/pci/drivers/ICE1712
/sys/bus/pci/drivers/ICE1712/new_id
/sys/bus/pci/drivers/Yamaha DS-XG PCI
/sys/bus/pci/drivers/Yamaha DS-XG PCI/new_id
/sys/bus/pci/drivers/Trident4DWaveAudio
/sys/bus/pci/drivers/Trident4DWaveAudio/new_id
/sys/bus/pci/drivers/RME Hammerfall DSP
/sys/bus/pci/drivers/RME Hammerfall DSP/new_id
/sys/bus/pci/drivers/RME Digi9652 (Hammerfall
/sys/bus/pci/drivers/RME Digi9652 (Hammerfall/new_id
/sys/bus/pci/drivers/NeoMagic 256
/sys/bus/pci/drivers/NeoMagic 256/new_id
/sys/bus/pci/drivers/korg1212
/sys/bus/pci/drivers/korg1212/new_id
/sys/bus/pci/drivers/EMU10K1_Audigy
/sys/bus/pci/drivers/EMU10K1_Audigy/new_id
/sys/bus/pci/drivers/Sound Fusion CS46xx
/sys/bus/pci/drivers/Sound Fusion CS46xx/new_id
/sys/bus/pci/drivers/ALI 5451
/sys/bus/pci/drivers/ALI 5451/new_id
/sys/bus/pci/drivers/AZF3328
/sys/bus/pci/drivers/AZF3328/new_id
/sys/bus/pci/drivers/VIA 82xx Audio
/sys/bus/pci/drivers/VIA 82xx Audio/new_id
/sys/bus/pci/drivers/S3 SonicVibes
/sys/bus/pci/drivers/S3 SonicVibes/new_id
/sys/bus/pci/drivers/RME Digi96
/sys/bus/pci/drivers/RME Digi96/new_id
/sys/bus/pci/drivers/RME Digi32
/sys/bus/pci/drivers/RME Digi32/new_id
/sys/bus/pci/drivers/Maestro3
/sys/bus/pci/drivers/Maestro3/new_id
/sys/bus/pci/drivers/Intel ICH Joystick
/sys/bus/pci/drivers/Intel ICH Joystick/new_id
/sys/bus/pci/drivers/Intel ICH
/sys/bus/pci/drivers/Intel ICH/new_id
/sys/bus/pci/drivers/Intel ICH/0000:00:1f.5
/sys/bus/pci/drivers/FM801
/sys/bus/pci/drivers/FM801/new_id
/sys/bus/pci/drivers/ES1968 (ESS Maestro
/sys/bus/pci/drivers/ES1968 (ESS Maestro/new_id
/sys/bus/pci/drivers/ESS ES1938 (Solo-1)
/sys/bus/pci/drivers/ESS ES1938 (Solo-1)/new_id
/sys/bus/pci/drivers/Ensoniq AudioPCI
/sys/bus/pci/drivers/Ensoniq AudioPCI/new_id
/sys/bus/pci/drivers/CS4281
/sys/bus/pci/drivers/CS4281/new_id
/sys/bus/pci/drivers/C-Media PCI
/sys/bus/pci/drivers/C-Media PCI/new_id
/sys/bus/pci/drivers/ALS4000
/sys/bus/pci/drivers/ALS4000/new_id
/sys/bus/pci/drivers/uhci-hcd
/sys/bus/pci/drivers/uhci-hcd/new_id
/sys/bus/pci/drivers/uhci-hcd/0000:00:1d.2
/sys/bus/pci/drivers/uhci-hcd/0000:00:1d.1
/sys/bus/pci/drivers/uhci-hcd/0000:00:1d.0
/sys/bus/pci/drivers/ehci_hcd
/sys/bus/pci/drivers/ehci_hcd/new_id
/sys/bus/pci/drivers/ehci_hcd/0000:00:1d.7
/sys/bus/pci/drivers/PCI IDE
/sys/bus/pci/drivers/PCI IDE/new_id
/sys/bus/pci/drivers/RZ1000 IDE
/sys/bus/pci/drivers/RZ1000 IDE/new_id
/sys/bus/pci/drivers/PIIX IDE
/sys/bus/pci/drivers/PIIX IDE/new_id
/sys/bus/pci/drivers/PIIX IDE/0000:00:1f.1
/sys/bus/pci/drivers/8139too
/sys/bus/pci/drivers/8139too/new_id
/sys/bus/pci/drivers/8139too/0000:01:08.0
/sys/bus/pci/drivers/e1000
/sys/bus/pci/drivers/e1000/new_id
/sys/bus/pci/drivers/e1000/0000:01:0c.0
/sys/bus/pci/drivers/e100
/sys/bus/pci/drivers/e100/new_id
/sys/bus/pci/drivers/parport_pc
/sys/bus/pci/drivers/parport_pc/new_id
/sys/bus/pci/drivers/serial
/sys/bus/pci/drivers/serial/new_id
/sys/bus/pci/drivers/agpgart-via
/sys/bus/pci/drivers/agpgart-via/new_id
/sys/bus/pci/drivers/agpgart-serverworks
/sys/bus/pci/drivers/agpgart-serverworks/new_id
/sys/bus/pci/drivers/agpgart-sis
/sys/bus/pci/drivers/agpgart-sis/new_id
/sys/bus/pci/drivers/agpgart-intel
/sys/bus/pci/drivers/agpgart-intel/new_id
/sys/bus/pci/drivers/agpgart-intel/0000:00:00.0
/sys/bus/pci/drivers/agpgart-amdk7
/sys/bus/pci/drivers/agpgart-amdk7/new_id
/sys/bus/pci/drivers/agpgart-ali
/sys/bus/pci/drivers/agpgart-ali/new_id
thanks,
--
Ranjeet Shetye
Senior Software Engineer
Zultys Technologies
Ranjeet dot Shetye2 at Zultys dot com
http://www.zultys.com/
The views, opinions, and judgements expressed in this message are solely
those of the author. The message contents have not been reviewed or
approved by Zultys.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [OOPS] Linux-2.6.0-test5-bk
2003-09-11 0:36 ` Ranjeet Shetye
2003-09-11 2:40 ` Greg KH
@ 2003-09-13 19:55 ` Adam Belay
1 sibling, 0 replies; 12+ messages in thread
From: Adam Belay @ 2003-09-13 19:55 UTC (permalink / raw)
To: Ranjeet Shetye
Cc: Greg KH, Andrew Morton, linux-kernel, Patrick Mochel, Jaroslav Kysela
On Wed, Sep 10, 2003 at 05:36:51PM -0700, Ranjeet Shetye wrote:
> On Wed, 2003-09-10 at 17:24, Greg KH wrote:
> > On Wed, Sep 10, 2003 at 05:19:05PM -0700, Ranjeet Shetye wrote:
> > >
> > > Your changes fixed the issue. Thanks a lot for your help. I still get
> > > this call trace, but no more OOPS on bootup.
> > >
> > > kobject_register failed for Ensoniq AudioPCI (-17)
> > > Call Trace:
> > > [<c026f45c>] kobject_register+0x50/0x59
> > > [<c02f8003>] bus_add_driver+0x4c/0xaf
> > > [<c02f8453>] driver_register+0x31/0x35
> > > [<c027c3bf>] pci_populate_driver_dir+0x29/0x2b
> > > [<c027c491>] pci_register_driver+0x5e/0x83
> > > [<c06a145f>] alsa_card_ens137x_init+0x15/0x41
> > > [<c068475a>] do_initcalls+0x2a/0x97
> > > [<c012e920>] init_workqueues+0x12/0x2a
> > > [<c01050a3>] init+0x39/0x196
> > > [<c010506a>] init+0x0/0x196
> > > [<c0108f31>] kernel_thread_helper+0x5/0xb
> >
> > Odds are that the pci driver is trying to register 2 drivers with the
> > pci core with the same name. What does /sys/bus/pci/drivers show?
> >
> > thanks,
> >
> > greg k-h
Hi Ranjeet,
I noticed this in your .config included in your previous message.
>CONFIG_SND_ENS1370=y
>CONFIG_SND_ENS1371=y
I think the conflict might be occuring between these two drivers.
Look at sound/pci/ens1371.c and sound/pci/ens1370.c.
Out of curiosity, could you try this patch without making any changes to
your config. If it works properly, could you then verify it in sysfs.
--- a/sound/pci/ens1370.c 2003-09-13 19:28:45.000000000 +0000
+++ b/sound/pci/ens1370.c 2003-09-13 19:30:02.000000000 +0000
@@ -2354,7 +2354,11 @@
}
static struct pci_driver driver = {
- .name = "Ensoniq AudioPCI",
+#ifdef CHIP1371
+ .name = "Ensoniq 1371",
+#else
+ .name = "Ensoniq 1370",
+#endif
.id_table = snd_audiopci_ids,
.probe = snd_audiopci_probe,
.remove = __devexit_p(snd_audiopci_remove),
Thanks,
Adam
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2003-09-14 0:01 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-10 22:16 [OOPS] Linux-2.6.0-test5-bk Ranjeet Shetye
2003-09-10 22:46 ` Andrew Morton
2003-09-11 0:19 ` Ranjeet Shetye
2003-09-11 0:24 ` Greg KH
2003-09-11 0:36 ` Ranjeet Shetye
2003-09-11 2:40 ` Greg KH
2003-09-11 20:26 ` Ranjeet Shetye
2003-09-11 20:28 ` Greg KH
2003-09-11 20:43 ` Ranjeet Shetye
2003-09-13 19:55 ` Adam Belay
2003-09-10 23:25 ` Greg KH
2003-09-11 0:20 ` Ranjeet Shetye
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).