* 2.6.0-test5 usbserial oops
@ 2003-09-11 3:30 Greg Norris
2003-09-11 4:46 ` Greg KH
2003-10-11 19:35 ` 2.6.0-test7 " Greg Norris
0 siblings, 2 replies; 9+ messages in thread
From: Greg Norris @ 2003-09-11 3:30 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 463 bytes --]
I'm seeing a consistent oops with usbserial under 2.6.0-test5, which
occurs when I try to sync my pda using pilot-link. The module seems to
load (via hotplug) without any difficulty, and the sync itself works
fine... the oops occurs when the module is unloaded. Once this
happens, it requires a reboot to get usb working again.
I've attached the decoded oops, along with my kernel .config. If I
need to provide any additional information, please let me know.
[-- Attachment #2: oops.decoded --]
[-- Type: text/plain, Size: 4380 bytes --]
ksymoops 2.4.8 on i686 2.6.0-test5. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.0-test5/ (default)
-m /boot/System.map-2.6.0-test5 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel NULL pointer dereference at virtual address 000000cb
c01ff883
*pde = 00000000
Oops: 0000 [#1]
CPU: 1
EIP: 0060:[<c01ff883>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286
eax: ffffffff ebx: f75a8200 ecx: 00000000 edx: f60a9e00
esi: c02dc4a8 edi: c02dc4c0 ebp: c1bdde04 esp: c1bdde00
ds: 007b es: 007b ss: 0068
Stack: c02dc4c0 c1bdde20 f8aaa303 f60a9e00 f6073300 c1bdde2c c1bdde2c f75a82a4
c1bdde38 c01d95f9 f75a8280 c1bdde40 c01d9900 f75a82a4 c1bdde50 c01b2d4c
f75a82a4 f75a8200 00000001 f6073300 c1bdde74 f8aaa26c f75a82a4 f68cbc88
Call Trace:
[<f8aaa303>] port_release+0x66/0xc5 [usbserial]
[<c01d95f9>] device_release+0x5a/0x5e
[<c01d9900>] device_del+0x6a/0x90
[<c01b2d4c>] kobject_cleanup+0x73/0x75
[<f8aaa26c>] destroy_serial+0x189/0x1ba [usbserial]
[<c01b2d4c>] kobject_cleanup+0x73/0x75
[<f8aab1aa>] usb_serial_disconnect+0x37/0x7e [usbserial]
[<c01fa06f>] usb_unbind_interface+0x78/0x7a
[<c01da8e3>] device_release_driver+0x62/0x64
[<c01daa07>] bus_remove_device+0x54/0x93
[<c01d98f5>] device_del+0x5f/0x90
[<c01d993a>] device_unregister+0x14/0x22
[<c01fab97>] usb_disconnect+0xee/0x113
[<c01fd2c0>] hub_port_connect_change+0x323/0x328
[<c01fcba8>] hub_port_status+0x3a/0xa0
[<c01fd5b8>] hub_events+0x2f3/0x371
[<c01fd663>] hub_thread+0x2d/0xc2
[<c01092da>] ret_from_fork+0x6/0x14
[<c011b71a>] default_wake_function+0x0/0x2e
[<c01fd636>] hub_thread+0x0/0xc2
[<c01072d9>] kernel_thread_helper+0x5/0xb
Code: 8b 80 cc 00 00 00 85 c0 74 07 8b 40 20 85 c0 75 09 b8 ed ff
>>EIP; c01ff883 <usb_unlink_urb+14/39> <=====
>>eax; ffffffff <__kernel_rt_sigreturn+1bbf/????>
>>ebx; f75a8200 <__crc_redraw_screen+22fe1f/5580ca>
>>edx; f60a9e00 <__crc_ide_wait_cmd+6a9c74/6f420b>
>>esi; c02dc4a8 <ktype_device+0/c>
>>edi; c02dc4c0 <devices_subsys+0/60>
>>ebp; c1bdde04 <__crc_seq_path+2926b4/79605d>
>>esp; c1bdde00 <__crc_seq_path+2926b0/79605d>
Trace; f8aaa303 <__crc_pm_idle+19a484/8e97d5>
Trace; c01d95f9 <device_release+5a/5e>
Trace; c01d9900 <device_del+6a/90>
Trace; c01b2d4c <kobject_cleanup+73/75>
Trace; f8aaa26c <__crc_pm_idle+19a3ed/8e97d5>
Trace; c01b2d4c <kobject_cleanup+73/75>
Trace; f8aab1aa <__crc_pm_idle+19b32b/8e97d5>
Trace; c01fa06f <usb_unbind_interface+78/7a>
Trace; c01da8e3 <device_release_driver+62/64>
Trace; c01daa07 <bus_remove_device+54/93>
Trace; c01d98f5 <device_del+5f/90>
Trace; c01d993a <device_unregister+14/22>
Trace; c01fab97 <usb_disconnect+ee/113>
Trace; c01fd2c0 <hub_port_connect_change+323/328>
Trace; c01fcba8 <hub_port_status+3a/a0>
Trace; c01fd5b8 <hub_events+2f3/371>
Trace; c01fd663 <hub_thread+2d/c2>
Trace; c01092da <ret_from_fork+6/14>
Trace; c011b71a <default_wake_function+0/2e>
Trace; c01fd636 <hub_thread+0/c2>
Trace; c01072d9 <kernel_thread_helper+5/b>
Code; c01ff883 <usb_unlink_urb+14/39>
00000000 <_EIP>:
Code; c01ff883 <usb_unlink_urb+14/39> <=====
0: 8b 80 cc 00 00 00 mov 0xcc(%eax),%eax <=====
Code; c01ff889 <usb_unlink_urb+1a/39>
6: 85 c0 test %eax,%eax
Code; c01ff88b <usb_unlink_urb+1c/39>
8: 74 07 je 11 <_EIP+0x11>
Code; c01ff88d <usb_unlink_urb+1e/39>
a: 8b 40 20 mov 0x20(%eax),%eax
Code; c01ff890 <usb_unlink_urb+21/39>
d: 85 c0 test %eax,%eax
Code; c01ff892 <usb_unlink_urb+23/39>
f: 75 09 jne 1a <_EIP+0x1a>
Code; c01ff894 <usb_unlink_urb+25/39>
11: b8 ed ff 00 00 mov $0xffed,%eax
1 warning and 1 error issued. Results may not be reliable.
[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 24106 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI_HT=y
# CONFIG_ACPI is not set
CONFIG_ACPI_BOOT=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_IOCTL_V4=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=m
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HANGCHECK_TIMER=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_AX8817X_STANDALONE is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
CONFIG_USB_RIO500=m
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.0-test5 usbserial oops
2003-09-11 3:30 2.6.0-test5 usbserial oops Greg Norris
@ 2003-09-11 4:46 ` Greg KH
2003-09-12 21:20 ` Cliff White
2003-10-11 19:35 ` 2.6.0-test7 " Greg Norris
1 sibling, 1 reply; 9+ messages in thread
From: Greg KH @ 2003-09-11 4:46 UTC (permalink / raw)
To: linux-kernel
On Wed, Sep 10, 2003 at 10:30:55PM -0500, Greg Norris wrote:
> I'm seeing a consistent oops with usbserial under 2.6.0-test5, which
> occurs when I try to sync my pda using pilot-link. The module seems to
> load (via hotplug) without any difficulty, and the sync itself works
> fine... the oops occurs when the module is unloaded. Once this
> happens, it requires a reboot to get usb working again.
>
> I've attached the decoded oops, along with my kernel .config. If I
> need to provide any additional information, please let me know.
Can you load both the usbserial and visor modules with "debug=1":
modprobe usbserial debug=1
modprobe visor debug=1
and then sync and remove the visor driver?
I'd be very interested in the kernel debug log right up to the kernel
oops.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: 2.6.0-test5 usbserial oops
[not found] <3F60B4AB.7060109@kmlinux.fjfi.cvut.cz>
@ 2003-09-11 17:57 ` Greg KH
2003-09-11 22:32 ` Greg Norris
0 siblings, 1 reply; 9+ messages in thread
From: Greg KH @ 2003-09-11 17:57 UTC (permalink / raw)
To: Jindrich Makovicka; +Cc: linux-kernel
On Thu, Sep 11, 2003 at 07:45:15PM +0200, Jindrich Makovicka wrote:
> Hello,
>
> I have a similar problem, here is the syslog with debug=1 set for visor
> and usbserial. This occured after using a ppp connection. I am running
> 2.4.0test5 with v4l2 patch from http://bytesex.org/v4l/.
Hm, can you try the following patch and let me know if it fixes the
problem for you?
thanks,
greg k-h
--- a/drivers/usb/serial/usb-serial.c Wed Sep 3 08:47:22 2003
+++ b/drivers/usb/serial/usb-serial.c Thu Sep 11 11:01:55 2003
@@ -871,8 +871,10 @@
/* the ports are cleaned up and released in port_release() */
for (i = 0; i < serial->num_ports; ++i)
- if (serial->port[i]->dev.parent != NULL)
+ if (serial->port[i]->dev.parent != NULL) {
device_unregister(&serial->port[i]->dev);
+ serial->port[i] = NULL;
+ }
/* If this is a "fake" port, we have to clean it up here, as it will
* not get cleaned up in port_release() as it was never registered with
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: 2.6.0-test5 usbserial oops
2003-09-11 17:57 ` Re: 2.6.0-test5 " Greg KH
@ 2003-09-11 22:32 ` Greg Norris
2003-09-18 4:09 ` Greg KH
0 siblings, 1 reply; 9+ messages in thread
From: Greg Norris @ 2003-09-11 22:32 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 418 bytes --]
On Thu, Sep 11, 2003 at 10:57:56AM -0700, Greg KH wrote:
> Hm, can you try the following patch and let me know if it fixes the
> problem for you?
>
> thanks,
>
> greg k-h
I'm still getting an (apparently) identical oops. I've attached the
ksymoops output (your patch was applied for this one), along with the
debugging messages you requested previously. Let me know if I can
provide any additional info.
Thanx!
[-- Attachment #2: oops.decoded --]
[-- Type: text/plain, Size: 7877 bytes --]
ksymoops 2.4.8 on i686 2.6.0-test5. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.0-test5/ (default)
-m /boot/System.map-2.6.0-test5 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel NULL pointer dereference 4t vrrnuil edp:
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c01ff883>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010206
eax: 00000005 ebx: f67e7800 ecx: 00000000 edx: f751f600
esi: c02dc4a8 edi: c02dc4c0 ebp: c1bdde04 esp: c1bdde00
ds: 007b es: 007b ss: 0068
Stack: c02dc4c0 c1bdde20 f8aa430b f751f600 f8aa67c0 f8aa6373 f67e78d8 f67e78a4
c1bdde38 c01d95f9 f67e7880 c1bdde40 c01d9900 f67e78a4 c1bdde50 c01b2d4c
f67e78a4 f67e7800 00000001 f6ba0880 c1bdde74 f8aa426c f67e78a4 f8aa67c0
Call Trace:
[<f8aa430b>] port_release+0x66/0xc5 [usbserial]
[<c01d95f9>] device_release+0x5a/0x5e
[<c01d9900>] device_del+0x6a/0x90
[<c01b2d4c>] kobject_cleanup+0x73/0x75
[<f8aa426c>] destroy_serial+0x189/0x1c2 [usbserial]
[<c01b2d4c>] kobject_cleanup+0x73/0x75
[<f8aa51b2>] usb_serial_disconnect+0x37/0x7e [usbserial]
[<c01fa06f>] usb_unbind_interface+0x78/0x7a
[<c01da8e3>] device_release_driver+0x62/0x64
[<c01daa07>] bus_remove_device+0x54/0x93
[<c01d98f5>] device_del+0x5f/0x90
[<c01d993a>] device_unregister+0x14/0x22
[<c01fab97>] usb_disconnect+0xee/0x113
[<c01fd2c0>] hub_port_connect_change+0x323/0x328
[<c01fcba8>] hub_port_status+0x3a/0xa0
[<c01fd5b8>] hub_events+0x2f3/0x371
[<c01fd663>] hub_thread+0x2d/0xc2
[<c01092da>] ret_from_fork+0x6/0x14
[<c011b71a>] default_wake_function+0x0/0x2e
[<c01fd636>] hub_thread+0x0/0xc2
[<c01072d9>] kernel_thread_helper+0x5/0xb
Code: 8b 80 cc 00 00 00 85 c0 74 07 8b 40 20 85 c0 75 09 b8 ed ff
>>EIP; c01ff883 <usb_unlink_urb+14/39> <=====
>>ebx; f67e7800 <__crc_lookup_create+76bd1/29c1f5>
>>edx; f751f600 <__crc_redraw_screen+1a721f/5580ca>
>>esi; c02dc4a8 <ktype_device+0/c>
>>edi; c02dc4c0 <devices_subsys+0/60>
>>ebp; c1bdde04 <__crc_seq_path+2926b4/79605d>
>>esp; c1bdde00 <__crc_seq_path+2926b0/79605d>
Trace; f8aa430b <__crc_pm_idle+19448c/8e97d5>
Trace; c01d95f9 <device_release+5a/5e>
Trace; c01d9900 <device_del+6a/90>
Trace; c01b2d4c <kobject_cleanup+73/75>
Trace; f8aa426c <__crc_pm_idle+1943ed/8e97d5>
Trace; c01b2d4c <kobject_cleanup+73/75>
Trace; f8aa51b2 <__crc_pm_idle+195333/8e97d5>
Trace; c01fa06f <usb_unbind_interface+78/7a>
Trace; c01da8e3 <device_release_driver+62/64>
Trace; c01daa07 <bus_remove_device+54/93>
Trace; c01d98f5 <device_del+5f/90>
Trace; c01d993a <device_unregister+14/22>
Trace; c01fab97 <usb_disconnect+ee/113>
Trace; c01fd2c0 <hub_port_connect_change+323/328>
Trace; c01fcba8 <hub_port_status+3a/a0>
Trace; c01fd5b8 <hub_events+2f3/371>
Trace; c01fd663 <hub_thread+2d/c2>
Trace; c01092da <ret_from_fork+6/14>
Trace; c011b71a <default_wake_function+0/2e>
Trace; c01fd636 <hub_thread+0/c2>
Trace; c01072d9 <kernel_thread_helper+5/b>
Code; c01ff883 <usb_unlink_urb+14/39>
00000000 <_EIP>:
Code; c01ff883 <usb_unlink_urb+14/39> <=====
0: 8b 80 cc 00 00 00 mov 0xcc(%eax),%eax <=====
Code; c01ff889 <usb_unlink_urb+1a/39>
6: 85 c0 test %eax,%eax
Code; c01ff88b <usb_unlink_urb+1c/39>
8: 74 07 je 11 <_EIP+0x11>
Code; c01ff88d <usb_unlink_urb+1e/39>
a: 8b 40 20 mov 0x20(%eax),%eax
Code; c01ff890 <usb_unlink_urb+21/39>
d: 85 c0 test %eax,%eax
Code; c01ff892 <usb_unlink_urb+23/39>
f: 75 09 jne 1a <_EIP+0x1a>
Code; c01ff894 <usb_unlink_urb+25/39>
11: b8 ed ff 00 00 mov $0xffed,%eax
CPU 1 IS NOW UP!
Machine check exception polling timer started.
e100: eth0 NIC Link is Up 100 Mbps Full duplex
Unable to handle kernel NULL pointer dereference at virtual address 000000d1
c01ff883
*pde = 00000000
Oops: 0000 [#1]
CPU: 1
EIP: 0060:[<c01ff883>] Not tainted
EFLAGS: 00010206
eax: 00000005 ebx: f6bdc600 ecx: 00000000 edx: f737d800
esi: c02dc4a8 edi: c02dc4c0 ebp: c1bdde04 esp: c1bdde00
ds: 007b es: 007b ss: 0068
Stack: c02dc4c0 c1bdde20 f8a8d30b f737d800 f8a8f7c0 f8a8f373 f6bdc6d8 f6bdc6a4
c1bdde38 c01d95f9 f6bdc680 c1bdde40 c01d9900 f6bdc6a4 c1bdde50 c01b2d4c
f6bdc6a4 f6bdc600 00000001 c1b27300 c1bdde74 f8a8d26c f6bdc6a4 f8a8f7c0
Call Trace:
[<f8a8d30b>] port_release+0x66/0xc5 [usbserial]
[<c01d95f9>] device_release+0x5a/0x5e
[<c01d9900>] device_del+0x6a/0x90
[<c01b2d4c>] kobject_cleanup+0x73/0x75
[<f8a8d26c>] destroy_serial+0x189/0x1c2 [usbserial]
[<c01b2d4c>] kobject_cleanup+0x73/0x75
[<f8a8e1b2>] usb_serial_disconnect+0x37/0x7e [usbserial]
[<c01fa06f>] usb_unbind_interface+0x78/0x7a
[<c01da8e3>] device_release_driver+0x62/0x64
[<c01daa07>] bus_remove_device+0x54/0x93
[<c01d98f5>] device_del+0x5f/0x90
[<c01d993a>] device_unregister+0x14/0x22
[<c01fab97>] usb_disconnect+0xee/0x113
[<c01fd2c0>] hub_port_connect_change+0x323/0x328
[<c01fcba8>] hub_port_status+0x3a/0xa0
[<c01fd5b8>] hub_events+0x2f3/0x371
[<c01fd663>] hub_thread+0x2d/0xc2
[<c01092da>] ret_from_fork+0x6/0x14
[<c011b71a>] default_wake_function+0x0/0x2e
[<c01fd636>] hub_thread+0x0/0xc2
[<c01072d9>] kernel_thread_helper+0x5/0xb
Code: 8b 80 cc 00 00 00 85 c0 74 07 8b 40 20 85 c0 75 09 b8 ed ff
>>EIP; c01ff883 <usb_unlink_urb+14/39> <=====
>>ebx; f6bdc600 <__crc_color_table+27ed7/83a35>
>>edx; f737d800 <__crc_redraw_screen+541f/5580ca>
>>esi; c02dc4a8 <ktype_device+0/c>
>>edi; c02dc4c0 <devices_subsys+0/60>
>>ebp; c1bdde04 <__crc_seq_path+2926b4/79605d>
>>esp; c1bdde00 <__crc_seq_path+2926b0/79605d>
Trace; f8a8d30b <__crc_pm_idle+17d48c/8e97d5>
Trace; c01d95f9 <device_release+5a/5e>
Trace; c01d9900 <device_del+6a/90>
Trace; c01b2d4c <kobject_cleanup+73/75>
Trace; f8a8d26c <__crc_pm_idle+17d3ed/8e97d5>
Trace; c01b2d4c <kobject_cleanup+73/75>
Trace; f8a8e1b2 <__crc_pm_idle+17e333/8e97d5>
Trace; c01fa06f <usb_unbind_interface+78/7a>
Trace; c01da8e3 <device_release_driver+62/64>
Trace; c01daa07 <bus_remove_device+54/93>
Trace; c01d98f5 <device_del+5f/90>
Trace; c01d993a <device_unregister+14/22>
Trace; c01fab97 <usb_disconnect+ee/113>
Trace; c01fd2c0 <hub_port_connect_change+323/328>
Trace; c01fcba8 <hub_port_status+3a/a0>
Trace; c01fd5b8 <hub_events+2f3/371>
Trace; c01fd663 <hub_thread+2d/c2>
Trace; c01092da <ret_from_fork+6/14>
Trace; c011b71a <default_wake_function+0/2e>
Trace; c01fd636 <hub_thread+0/c2>
Trace; c01072d9 <kernel_thread_helper+5/b>
Code; c01ff883 <usb_unlink_urb+14/39>
00000000 <_EIP>:
Code; c01ff883 <usb_unlink_urb+14/39> <=====
0: 8b 80 cc 00 00 00 mov 0xcc(%eax),%eax <=====
Code; c01ff889 <usb_unlink_urb+1a/39>
6: 85 c0 test %eax,%eax
Code; c01ff88b <usb_unlink_urb+1c/39>
8: 74 07 je 11 <_EIP+0x11>
Code; c01ff88d <usb_unlink_urb+1e/39>
a: 8b 40 20 mov 0x20(%eax),%eax
Code; c01ff890 <usb_unlink_urb+21/39>
d: 85 c0 test %eax,%eax
Code; c01ff892 <usb_unlink_urb+23/39>
f: 75 09 jne 1a <_EIP+0x1a>
Code; c01ff894 <usb_unlink_urb+25/39>
11: b8 ed ff 00 00 mov $0xffed,%eax
1 warning and 1 error issued. Results may not be reliable.
[-- Attachment #3: kern.log.gz --]
[-- Type: application/octet-stream, Size: 18528 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.0-test5 usbserial oops
2003-09-11 4:46 ` Greg KH
@ 2003-09-12 21:20 ` Cliff White
0 siblings, 0 replies; 9+ messages in thread
From: Cliff White @ 2003-09-12 21:20 UTC (permalink / raw)
To: Greg KH; +Cc: linux-kernel, cliffw
> On Wed, Sep 10, 2003 at 10:30:55PM -0500, Greg Norris wrote:
> > I'm seeing a consistent oops with usbserial under 2.6.0-test5, which
> > occurs when I try to sync my pda using pilot-link. The module seems to
> > load (via hotplug) without any difficulty, and the sync itself works
> > fine... the oops occurs when the module is unloaded. Once this
> > happens, it requires a reboot to get usb working again.
> >
> > I've attached the decoded oops, along with my kernel .config. If I
> > need to provide any additional information, please let me know.
>
> Can you load both the usbserial and visor modules with "debug=1":
> modprobe usbserial debug=1
> modprobe visor debug=1
>
> and then sync and remove the visor driver?
> I'd be very interested in the kernel debug log right up to the kernel
> oops.
I am also seeing an oops, 2.6.0-test5-mm1, Sony CLIE PDA.
I'll try to get you the kernel debug tonight.
cliffw
>
> thanks,
>
> greg k-h
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: 2.6.0-test5 usbserial oops
2003-09-11 22:32 ` Greg Norris
@ 2003-09-18 4:09 ` Greg KH
2003-09-19 1:39 ` Greg Norris
0 siblings, 1 reply; 9+ messages in thread
From: Greg KH @ 2003-09-18 4:09 UTC (permalink / raw)
To: linux-kernel
On Thu, Sep 11, 2003 at 05:32:24PM -0500, Greg Norris wrote:
> On Thu, Sep 11, 2003 at 10:57:56AM -0700, Greg KH wrote:
> > Hm, can you try the following patch and let me know if it fixes the
> > problem for you?
> >
> > thanks,
> >
> > greg k-h
>
> I'm still getting an (apparently) identical oops. I've attached the
> ksymoops output (your patch was applied for this one), along with the
> debugging messages you requested previously. Let me know if I can
> provide any additional info.
Does this happen on 2.6.0-test5-bk3?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: 2.6.0-test5 usbserial oops
2003-09-18 4:09 ` Greg KH
@ 2003-09-19 1:39 ` Greg Norris
0 siblings, 0 replies; 9+ messages in thread
From: Greg Norris @ 2003-09-19 1:39 UTC (permalink / raw)
To: linux-kernel
On Wed, Sep 17, 2003 at 09:09:55PM -0700, Greg KH wrote:
> > I'm still getting an (apparently) identical oops. I've attached the
> > ksymoops output (your patch was applied for this one), along with the
> > debugging messages you requested previously. Let me know if I can
> > provide any additional info.
>
> Does this happen on 2.6.0-test5-bk3?
I can confirm that this is still an issue on 2.6.0-test5-bk5... I
didn't test -bk3 explicitly (although I certainly will if you like), as
I assume that any relevant changes will be in -bk5 as well. The oops
appears to be essentially identical, so I'm omitting it and the debug
output in order to conserve bandwidth. If you want to see it anyway,
just let me know.
Thanx!
^ permalink raw reply [flat|nested] 9+ messages in thread
* 2.6.0-test7 usbserial oops
2003-09-11 3:30 2.6.0-test5 usbserial oops Greg Norris
2003-09-11 4:46 ` Greg KH
@ 2003-10-11 19:35 ` Greg Norris
2003-10-23 2:43 ` Greg Norris
1 sibling, 1 reply; 9+ messages in thread
From: Greg Norris @ 2003-10-11 19:35 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 661 bytes --]
On Wed, Sep 10, 2003 at 10:30:55PM -0500, Greg Norris wrote:
> I'm seeing a consistent oops with usbserial under 2.6.0-test5, which
> occurs when I try to sync my pda using pilot-link. The module seems to
> load (via hotplug) without any difficulty, and the sync itself works
> fine... the oops occurs when the module is unloaded. Once this
> happens, it requires a reboot to get usb working again.
In case anyone was wondering, this problem still occurs with
2.6.0-test7. I've attached all the relevant information which I'm
aware of, and would be happy to provide additional details/testing if
requested. Suggestions would, of course, be quite welcome.
[-- Attachment #2: oops.decoded --]
[-- Type: text/plain, Size: 3924 bytes --]
ksymoops 2.4.9 on i686 2.6.0-test7. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.0-test7/ (default)
-m /boot/System.map-2.6.0-test7 (specified)
Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel NULL pointer dereference at virtual address 000000d1
c020127f
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c020127f>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010206
eax: 00000005 ebx: f765c000 ecx: 00000000 edx: f75fba00
esi: c02e0ac8 edi: c02e0ae0 ebp: c1bdddf8 esp: c1bdddf4
ds: 007b es: 007b ss: 0068
Stack: c02e0ae0 c1bdde14 f8aa130b f75fba00 f8aa37e0 f8aa3393 f765c0d8 f765c0a4
c1bdde2c c01da849 f765c080 c1bdde34 c01dab61 f765c0a4 c1bdde44 c01b3ba0
f765c0a4 f765c000 00000001 f75fb680 c1bdde68 f8aa126c f765c0a4 f8aa37e0
Call Trace:
[<f8aa130b>] port_release+0x66/0xc5 [usbserial]
[<c01da849>] device_release+0x5a/0x5e
[<c01dab61>] device_del+0x6a/0x90
[<c01b3ba0>] kobject_cleanup+0x73/0x75
[<f8aa126c>] destroy_serial+0x189/0x1c2 [usbserial]
[<c01b3ba0>] kobject_cleanup+0x73/0x75
[<f8aa21bb>] usb_serial_disconnect+0x37/0x7e [usbserial]
[<c01fbadb>] usb_unbind_interface+0x78/0x7a
[<c01dbb47>] device_release_driver+0x62/0x64
[<c01dbc6b>] bus_remove_device+0x54/0x93
[<c01dab56>] device_del+0x5f/0x90
[<c0201fe1>] usb_disable_device+0x73/0xae
[<c01fc5dd>] usb_disconnect+0xa0/0xef
[<c01fec61>] hub_port_connect_change+0x323/0x328
[<c01fe5af>] hub_port_status+0x3a/0xa0
[<c01fef59>] hub_events+0x2f3/0x371
[<c01ff004>] hub_thread+0x2d/0xc2
[<c010930e>] ret_from_fork+0x6/0x14
[<c011bc92>] default_wake_function+0x0/0x2e
[<c01fefd7>] hub_thread+0x0/0xc2
[<c0107309>] kernel_thread_helper+0x5/0xb
Code: 8b 80 cc 00 00 00 85 c0 74 07 8b 40 20 85 c0 75 09 b8 ed ff
>>EIP; c020127f <usb_unlink_urb+14/39> <=====
>>ebx; f765c000 <__crc_redraw_screen+2e3c1f/48b3be>
>>edx; f75fba00 <__crc_redraw_screen+28361f/48b3be>
>>esi; c02e0ac8 <ktype_device+0/c>
>>edi; c02e0ae0 <devices_subsys+0/60>
>>ebp; c1bdddf8 <__crc_ide_handler_parser+12e5ff/2a0c6b>
>>esp; c1bdddf4 <__crc_ide_handler_parser+12e5fb/2a0c6b>
Trace; f8aa130b <__crc_pm_idle+19148c/2b7e5e>
Trace; c01da849 <device_release+5a/5e>
Trace; c01dab61 <device_del+6a/90>
Trace; c01b3ba0 <kobject_cleanup+73/75>
Trace; f8aa126c <__crc_pm_idle+1913ed/2b7e5e>
Trace; c01b3ba0 <kobject_cleanup+73/75>
Trace; f8aa21bb <__crc_pm_idle+19233c/2b7e5e>
Trace; c01fbadb <usb_unbind_interface+78/7a>
Trace; c01dbb47 <device_release_driver+62/64>
Trace; c01dbc6b <bus_remove_device+54/93>
Trace; c01dab56 <device_del+5f/90>
Trace; c0201fe1 <usb_disable_device+73/ae>
Trace; c01fc5dd <usb_disconnect+a0/ef>
Trace; c01fec61 <hub_port_connect_change+323/328>
Trace; c01fe5af <hub_port_status+3a/a0>
Trace; c01fef59 <hub_events+2f3/371>
Trace; c01ff004 <hub_thread+2d/c2>
Trace; c010930e <ret_from_fork+6/14>
Trace; c011bc92 <default_wake_function+0/2e>
Trace; c01fefd7 <hub_thread+0/c2>
Trace; c0107309 <kernel_thread_helper+5/b>
Code; c020127f <usb_unlink_urb+14/39>
00000000 <_EIP>:
Code; c020127f <usb_unlink_urb+14/39> <=====
0: 8b 80 cc 00 00 00 mov 0xcc(%eax),%eax <=====
Code; c0201285 <usb_unlink_urb+1a/39>
6: 85 c0 test %eax,%eax
Code; c0201287 <usb_unlink_urb+1c/39>
8: 74 07 je 11 <_EIP+0x11>
Code; c0201289 <usb_unlink_urb+1e/39>
a: 8b 40 20 mov 0x20(%eax),%eax
Code; c020128c <usb_unlink_urb+21/39>
d: 85 c0 test %eax,%eax
Code; c020128e <usb_unlink_urb+23/39>
f: 75 09 jne 1a <_EIP+0x1a>
Code; c0201290 <usb_unlink_urb+25/39>
11: b8 ed ff 00 00 mov $0xffed,%eax
1 error issued. Results may not be reliable.
[-- Attachment #3: kern.log.gz --]
[-- Type: application/octet-stream, Size: 29040 bytes --]
[-- Attachment #4: config.gz --]
[-- Type: application/octet-stream, Size: 6096 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.0-test7 usbserial oops
2003-10-11 19:35 ` 2.6.0-test7 " Greg Norris
@ 2003-10-23 2:43 ` Greg Norris
0 siblings, 0 replies; 9+ messages in thread
From: Greg Norris @ 2003-10-23 2:43 UTC (permalink / raw)
To: linux-kernel
On Sat, Oct 11, 2003 at 02:35:59PM -0500, Greg Norris wrote:
> In case anyone was wondering, this problem still occurs with
> 2.6.0-test7. I've attached all the relevant information which I'm
> aware of, and would be happy to provide additional details/testing if
> requested. Suggestions would, of course, be quite welcome.
I just received my new Treo 600 yesterday, and I'm happy to report that
it has no problem syncing under the 2.6.0-test8 kernel. The Treo 300,
on the other hand, still triggers the oops with 100% reliability. I
expect to have access to the 300 for some time, so I'd be happy to
verify any fixes which are developed.
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2003-10-23 2:43 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-11 3:30 2.6.0-test5 usbserial oops Greg Norris
2003-09-11 4:46 ` Greg KH
2003-09-12 21:20 ` Cliff White
2003-10-11 19:35 ` 2.6.0-test7 " Greg Norris
2003-10-23 2:43 ` Greg Norris
[not found] <3F60B4AB.7060109@kmlinux.fjfi.cvut.cz>
2003-09-11 17:57 ` Re: 2.6.0-test5 " Greg KH
2003-09-11 22:32 ` Greg Norris
2003-09-18 4:09 ` Greg KH
2003-09-19 1:39 ` Greg Norris
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).